Finite-element analysis of material and parameter effects in laser-based thermoelastic ultrasound generation

Reducing inter-element acoustic crosstalk in capacitive micromachined ultrasound transducers

The inter-element acoustic crosstalk problem in capacitive micromachined ultrasound transducer (CMUT) arrays is discussed in this paper. A transfer function matrix approach was used to derive modified transmit waveforms on adjacent elements to reduce the apparent acoustic crosstalk. The significance of this is that this technique relies on programmable waveforms, so that it yields a reduced crosstalk effect with no additional fabrication complexity if the requisite programmable waveform transmit circuits are available. The crosstalk reduction achieved by this method also was examined in combination with conventional (physical separation-based) crosstalk reduction approaches. A CMUT transducer array structure was simulated in a two-dimensional (2-D) model using finite element analysis (FEA), and the crosstalk reduction method was tested for both small and large alternating current (AC) (ultrasonic) excitation conditions. A 25 dB crosstalk reduction was achieved for small AC excitation conditions in which approximately linear operation is encountered. When the AC excitation amplitude was large compared to the direct current (DC) bias, an "iterative harmonic cancellation" approach (also based on programmable waveform techniques) could be applied in combination with the crosstalk reduction method to minimize the inherently transmitted harmonics, and a similar crosstalk reduction effect of 25.5 dB was achieved. This method also can be combined with other structure-modification based crosstalk reduction approaches.