Impact of Radio Frequency, Microwaving, and High Hydrostatic Pressure at Elevated Temperature on the Nutritional and Antinutritional Components in Black Soybeans

Application of legumes in plant-based milk alternatives: a review of limitations and solutions

In recent years, a global shift has been observed toward reducing the consumption of animal-derived foods in favor of healthier and more sustainable dietary choices. This has led to a steady growth in the market for plant-based milk alternatives (PBMAs). Projections suggest that this market will reach a value of USD 69.8 billion by 2030. Legumes, being traditional and nutritious ingredients for PMBAs, are rich in proteins, dietary fibers, and other nutrients, with potential health benefits such as anticancer and cardiovascular disease prevention. In this review, the application of 12 legumes in plant-based milk alternatives was thoroughly discussed for the first time. However, compared to milk, processing of legume-based beverages can lead to deficiencies such as nutritional imbalance, off-flavor, and emulsion stratification. Considering the potential and challenges associated with legume-based beverages, this review aims to provide a scientific comparison between legume-based beverages and cow's milk in terms of nutritional quality, organoleptic attributes and stability, and to summarize ways to improve the deficiencies of legume-based beverages in terms of raw materials and processing method improvements. In conclusion, the legume-based beverage industry will be better enhanced and developed by improving the issues.

Food processing to reduce antinutrients in plant-based foods

Antinutrients such as phytic acids, tannins, saponin, and enzyme inhibitors are phytochemicals that can decrease the bioavailability of micro- and macronutrients, thus causing them to be unavailable for absorptions in the digestive system. Antinutrients are a major concern especially in countries where plant-based commodities such as wheat, legumes, and cereals are staple foods, for the antinutrients can cause not only mineral deficiencies, but also lead to more serious health issues. Although various thermal and non-thermal processing methods such as cooking, boiling, and fermentation processes have been practiced to decrease the level of antinutrients, these processes may also undesirably influence the final products. More advanced practices, such as ozonation and cold plasma processing (CPP), have been applied to decrease the antinutrients without majorly affecting the physicochemical and nutritional aspects of the commodities post-processing. This review will cover the types of antinutrients that are commonly found in plants, and the available processing methods that can be used, either singly or in combination, to significantly decrease the antinutrients, thus rendering the foods safe for consumption.

Effect of Thermal and Non-Thermal Processing on Nutritional, Functional, Safety Characteristics and Sensory Quality of White Cabbage Powder

This study was aimed to improve nutritional, functional and consumer safety aspects of cabbage powder (CP). White cabbage (Brassica oleracea var. capitata f. alba) was dehydrated to CP following microwave heating, blanching, alkali or acid washing treatments. The results for nutrients and mineral composition of raw and processed CP elucidated raw CP to exhibit significantly (p < 0.05) higher amounts of protein (12.2%), dietary fiber (25.2%), Na (52 mg/100 g), Ca (355 mg/100 g), K (286 mg/100 g), Fe (14 mg/100 g) and Zn (32 mg/100 g). Among different processing techniques, microwave treatment resulted in a higher rate of reduction for alkaloids, oxalates, tannins and phytates contents, i.e., 77%, 85%, 85%, and 86%, respectively. Likewise, microwave treatment was found more effective in reducing residual levels of neonicotinoids, pyrethroids, organophosphates including imidacloprid, cypermethrin, bifenthrin, chlorpyrifos and deltamethrin in cabbage in the range of 0.98−0.12 ppm, 1.22−0.23 ppm, 1.03−0.15 ppm, 1.97−0.43 ppm, and 2.12−0.36 ppm, respectively. CP supplementation at the rate of 5% in unleavened flatbreads was observed to maintain textural and sensory attributes of the product. The results suggest microwave heating as a cost-effective technique to reduce toxicants load in cabbage powder. Further, ~5% supplementation of CP in wheat flour may also improve nutritional and functional properties of the baked goods.

The effect of radiofrequency heat treatment on trypsin inhibitor activity and in vitro digestibility of soybean varieties (Glycine max. (L.) Merr.)

Kunitz (KTI) and Bowman-Birk (BBI) trypsin inhibitors were characterized in soybean seeds. Cultivars having KTI/BBI (Pannónia Kincse, PK) or lacking KTI (Aries; Hilario; Bahia) were assessed with well-characterized soybean varieties having Ti-a or ti types of KTI mobility. The TIA values of Pannónia Kincse (9.8 ± 0.48 mg/g) were not significantly different (p ≤ 0.05) from Ti-a samples (10.07 ± 1.86 mg/g), while of Aires, Bahia, Hilario (6.19 ± 1.89) were identical (p ≤ 0.05) with ti samples (6.63 ± 1.99). Radiofrequency heat treatment (RF) decreased TIA values (p ≤ 0.05) at ≥ 100 °C. However, in the traditional soybean variety, the RF at 110 °C was more effective in eliminating the residual KTI activity. The remaining or the disapperaing bioactive form of trypsin inhibitors were succesfully characterized by the means of a standardized in vitro digestion model. It showed that residual BBI-originated trypsin inhibitor activity was in the stomach even after RF at 110 °C, whereas its chymotrypsin inhibitor activity was not detectable at all. Although PK and KTI null types of soybean seeds still required an energy-saving, gentle heat treatment to inactive the trypsin inhibitors before using them as food or feed, the physicochemical properties and processing quality of soybean products were protected, improved.

Legume Seed Protein Digestibility as Influenced by Traditional and Emerging Physical Processing Technologies

The increased consumption of legume seeds as a strategy for enhancing food security, reducing malnutrition, and improving health outcomes on a global scale remains an ongoing subject of profound research interest. Legume seed proteins are rich in their dietary protein contents. However, coexisting with these proteins in the seed matrix are other components that inhibit protein digestibility. Thus, improving access to legume proteins often depends on the neutralisation of these inhibitors, which are collectively described as antinutrients or antinutritional factors. The determination of protein quality, which typically involves evaluating protein digestibility and essential amino acid content, is assessed using various methods, such as in vitro simulated gastrointestinal digestibility, protein digestibility-corrected amino acid score (IV-PDCAAS), and digestible indispensable amino acid score (DIAAS). Since most edible legumes are mainly available in their processed forms, an interrogation of these processing methods, which could be traditional (e.g., cooking, milling, extrusion, germination, and fermentation) or based on emerging technologies (e.g., high-pressure processing (HPP), ultrasound, irradiation, pulsed electric field (PEF), and microwave), is not only critical but also necessary given the capacity of processing methods to influence protein digestibility. Therefore, this timely and important review discusses how each of these processing methods affects legume seed digestibility, examines the potential for improvements, highlights the challenges posed by antinutritional factors, and suggests areas of focus for future research.

Effects of "nine steaming nine sun-drying" on proximate composition, protein structure and volatile compounds of black soybeans

Nine steaming nine sun-drying is a traditional processing technology for food or medicinal materials. The dynamic changes of the proximate composition, protein structure and volatile compounds during nine-time steaming and sun-drying of black soybeans (BS) were studied. The proximate composition results showed that the content of protein, carbohydrate and fat of BS decreased after processing, whereas the relative content of amino acids remained basically unchanged. Protein structure was evaluated using Fourier transform infrared spectroscopy (FT-IR), Ultraviolet absorption spectroscopy (UV) and Fluorescence spectroscopy. FT-IR result revealed that the relative contents of β-sheet and β-turn of the secondary structure of black soybean protein isolate (BSPI) decreased but the relative contents of α-helix and random coil increased after steaming and sun-drying. The results of UV and fluorescence spectroscopy confirmed changes in the protein conformation. In addition, SPME-GCMS analysis demonstrated that hydrocarbons, alcohols and aldehydes were the main volatile compounds. The relative contents of 1-octen-3-ol and hexanal, which are the main sources of beany flavor decreased significantly compared with raw BS. Principal component analysis (PCA) results showed that the volatile compounds of nine steamed and nine sun-dried BS could be well distinguished during the process. These findings may therefore provide a scientific basis for the application of nine-time steamed and sun-dried BS in food industry and contribute to the understanding of process-induced chemical transformations in this ancient processing technique.

Black soybean (Glycine max (L.) Merr.): paving the way toward new nutraceutical

Black soybean (BS) is a nutritious legume that is high in proteins, essential amino acids, dietary fiber, vitamins, minerals, anthocyanins, phenolic acids, isoflavones, and flavones. Traditional approaches for extracting BS bioactive compounds are commonly employed because they are simple and inexpensive, but they use toxic solvents and have lower yields. As a result, new extraction techniques have been developed, such as microwave, ultrasound, and enzyme-assisted extraction. Modern approaches are less harmful to the environment, are faster, and produce higher yields. The major anthocyanin in the BS seed coat was discovered as cyanidin-3-O-glucoside, accounting for nearly 75% of the total anthocyanins. BS and its seed coat also contains phenolic acids (p-hydroxybenzoic, gallic, vanillin, syringic acid), isoflavones (daidzein, glycitein and genistein), flavones, flavonols, flavanones, and flavanols. Bioactive compounds present in BS exhibit antioxidant, anti-cancerous, anti-diabetic, anti-obesity, anti-inflammatory, cardio and neuroprotective activities. The characterization and biological activity investigation of these bioactive compounds has provided researchers and food manufacturers with valuable information for developing functional food products and nutraceutical ingredients. In this review, the nutritional makeup of BS is reviewed, and the paper seeks to provide an insight of bioactive compound extraction methods as well as bioactive compounds identified by various researchers. The biological activities of BS extracts and their potential applications in food products (noodles), biodegradable films (pH sensitive film), and therapeutic applications (wound healing and anti-inflammation) are also discussed in the study. Therefore, BS have enormous potential for use in developing functional foods and nutraceutical components. This is the first review of its sort to describe and explain various extraction methodologies and characterization of bioactives, as well as their biological activity recorded in diverse works of literature, making it possible for food manufacturers and scientists to get a quick overview.

Effects of Radio Frequency Pretreatment on Quality of Tree Peony Seed Oils: Process Optimization and Comparison with Microwave and Roasting

In this study, we explored the technical parameters of tree peony seeds oil (TPSO) after their treatment with radio frequency (RF) at 0 °C-140 °C, and compared the results with microwave (MW) and roasted (RT) pretreatment in terms of their physicochemical properties, bioactivity (fatty acid tocopherols and phytosterols), volatile compounds and antioxidant activity of TPSO. RF (140 °C) pretreatment can effectively destroy the cell structure, substantially increasing oil yield by 15.23%. Tocopherols and phytosterols were enhanced in oil to 51.45 mg/kg and 341.35 mg/kg, respectively. In addition, antioxidant activities for 2,2-diphenyl-1-picrylhydrazyl (DPPH) and ferric-reducing antioxidant power (FRAP) were significantly improved by 33.26 μmol TE/100 g and 65.84 μmol TE/100 g, respectively (p < 0.05). The induction period (IP) value increased by 4.04 times. These results are similar to those of the MW pretreatment. The contents of aromatic compounds were significantly increased, resulting in improved flavors and aromas (roasted, nutty), by RF, MW and RT pretreatments. The three pretreatments significantly enhanced the antioxidant capacities and oxidative stabilities (p < 0.05). The current findings reveal RF to be a potential pretreatment for application in the industrial production of TPSO.

Aspects of high hydrostatic pressure food processing: Perspectives on technology and food safety

The last two decades saw a steady increase of high hydrostatic pressure (HHP) used for treatment of foods. Although the science of biomaterials exposed to high pressure started more than a century ago, there still seem to be a number of unanswered questions regarding safety of foods processed using HHP. This review gives an overview on historical development and fundamental aspects of HHP, as well as on potential risks associated with HHP food applications based on available literature. Beside the combination of pressure and temperature, as major factors impacting inactivation of vegetative bacterial cells, bacterial endospores, viruses, and parasites, factors, such as food matrix, water content, presence of dissolved substances, and pH value, also have significant influence on their inactivation by pressure. As a result, pressure treatment of foods should be considered for specific food groups and in accordance with their specific chemical and physical properties. The pressure necessary for inactivation of viruses is in many instances slightly lower than that for vegetative bacterial cells; however, data for food relevant human virus types are missing due to the lack of methods for determining their infectivity. Parasites can be inactivated by comparatively lower pressure than vegetative bacterial cells. The degrees to which chemical reactions progress under pressure treatments are different to those of conventional thermal processes, for example, HHP leads to lower amounts of acrylamide and furan. Additionally, the formation of new unknown or unexpected substances has not yet been observed. To date, no safety-relevant chemical changes have been described for foods treated by HHP. Based on existing sensitization to non-HHP-treated food, the allergenic potential of HHP-treated food is more likely to be equivalent to untreated food. Initial findings on changes in packaging materials under HHP have not yet been adequately supported by scientific data.

Review of the beneficial and anti-nutritional qualities of phytic acid, and procedures for removing it from food products

Phytic acid (PA) is the primary phosphorus reserve in cereals and legumes which serves the biosynthesis needs of growing tissues during germination. It is generally considered to be an anti-nutritional factor found in grains because it can bind to minerals, proteins, and starch, limiting their bioavailability. However, this same mineral binding property can also confer a number of health benefits such as reducing the risk of certain cancers, supporting heart health, and managing renal stones. In addition, the ability of PA to bind minerals allows it to be used in certain food quality applications such as stabilizing the green color of vegetables, preventing lipid peroxidation, and reducing enzymatic browning in fruits/vegetables. These beneficial properties create a potential for added-value applications in the utilization of PA in many new areas. Many possible processing techniques for the preparation of raw materials in the food industry can be used to reduce the concentration of PA in foods to mitigate its anti-nutritional effects. In turn, the recovered PA by-products could be available for novel uses. In this review, a general overview of the beneficial and anti-nutritional effects of PA will be discussed and then dephytinization methods will be explained.

Low-Level Radiofrequency Exposure Does Not Induce Changes in MSC Biology: An in vitro Study for the Prevention of NIR-Related Damage

Background

The ubiquitous diffusion of radiofrequency (RF) radiation across human living environments has attracted the attention of scientists. Though the adverse health effects of RF exposure remain debatable, it has been reported that the interaction of such radiation with biological macromolecular structures can be deleterious for stem cells, inducing impairment of their main functions involving self-renewal and differentiation.

Purpose

The purpose of this study was to determine whether exposure to RF of 169 megahertz (MHz) that is part of very high radiofrequency (VHF) range 30–300 MHz, could cause damage to stem cells by inducing senescence and loss of regenerative and DNA repair capacity.

Methods

The study was conducted on mesenchymal stromal cells (MSCs) containing a subpopulation of stem cells. The MSCs were exposed to RFs of 169 MHz administered via an open meter 2G “Smart Meter” for different durations of time.

Result

We did not observe modifications in MSC biology as a result of the RF exposure conducted in our experiments.

Conclusion

We concluded that MSCs are insensitive to RF radiation exposure at 169 MHz for various time intervals, including longer durations.

Methods and procedures for reducing soy trypsin inhibitor activity by means of heat treatment combined with chemical methods

We have developed a new procedure for reducing soy trypsin inhibitor activity by means of heat treatment combined with chemical methods, through which soy trypsin inhibitor activity decreases to the tenth or twentieth part of the original value. We determined the optimal concentration of the applied chemicals (hydrogen-peroxide, ammonium-hydroxide) as well as the optimal temperature and duration of the treatment. The chemical procedure combined with heat treatment results in lower energy consumption as compared to the original heat treatment methods.