Indoor fungi: companions and contaminants

Phthalate monoesters accumulation in residential indoor dust and influence factors

Phthalate monoesters (mPAEs) possess biological activity that matches or even exceeds that of their parent compounds, phthalate esters (PAEs), negatively impacting humans. Indoor dust is the main carrier of indoor pollutants. In this study, indoor dust samples were collected from 46 households in Changchun City, Jilin Province, in May 2019, and particulate and flocculent fibrous dust was used as the research target to analyze the concentration and compositional characteristics of mPAEs, primary metabolites of five significant PAEs. The influence of factors such as architectural features and living habits in residential areas on exposure to mPAEs was explored. Ten suspected enzyme genes along with two metabolic pathways with the ability to degrade PAEs were screened using PICRUSt2. The results showed that the total concentrations of the five mPAEs in the indoor dust samples were particulate dust (11.49-78.69 μg/g) and flocculent fibrous dust (21.61-72.63 μg/g), respectively. The molar concentration ratio (RC) of mPAEs to corresponding PAEs significantly differed among chemicals, with MMP/DMP and MEP/DEP sporting the highest RC values. Different bacterial types have shown distinct influences against mPAEs and PAEs. Enzyme function and metabolic pathway abundance had a significant effect on the concentration of some mPAEs, mPAEs are most likely derived from microbial degradation of PAEs.

Long-term prediction of the effects of climate change on indoor climate and air quality

Limiting the negative impact of climate change on nature and humans is one of the most pressing issues of the 21st century. Meanwhile, people in modern society spend most of the day indoors. It is therefore surprising that comparatively little attention has been paid to indoor human exposure in relation to climate change. Heat action plans have now been designed in many regions to protect people from thermal stress in their private homes and in public buildings. However, in order to be able to plan effectively for the future, reliable information is required about the long-term effects of climate change on indoor air quality and climate. The Indoor Air Quality Climate Change (IAQCC) model is an expediant tool for estimating the influence of climate change on indoor air quality. The model follows a holistic approach in which building physics, emissions, chemical reactions, mold growth and exposure are combined with the fundamental parameters of temperature and humidity. The features of the model have already been presented in an earlier publication, and it is now used for the expected climatic conditions in Central Europe, taking into account various shared socioeconomic pathway (SSP) scenarios up to the year 2100. For the test house examined in this study, the concentrations of pollutants in the indoor air will continue to rise. At the same time, the risk of mold growth also increases (the mold index rose from 0 to 4 in the worst case for very sensitive material). The biggest problem, however, is protection against heat and humidity. Massive structural improvements are needed here, including insulation, ventilation, and direct sun protection. Otherwise, the occupants will be exposed to increasing thermal discomfort, which can also lead to severe heat stress indoors.

Damp Buildings: Associated Fungi and How to Find Them

The number of buildings experiencing humidity problems and fungal growth appears to be increasing as energy-saving measures and changes in construction practices and climate become more common. Determining the cause of the problem and documenting the type and extent of fungal growth are complex processes involving both building physics and indoor mycology. New detection and identification methods have been introduced, and new fungal species have been added to the list of building-related fungi. However, the lack of standardised procedures and general knowledge hampers the effort to resolve the problems and advocate for an effective renovation plan. This review provides a framework for building inspections on current sampling methods and detection techniques for building-related fungi. The review also contains tables with fungal species that have been identified on commonly used building materials in Europe and North America (e.g., gypsum wallboard, oriented strand board (OSB), concrete and mineral wool). The most reported building-associated fungi across all materials are Penicillium chrysogenum and Aspergillus versicolor. Chaetomium globosum is common on all organic materials, whereas Aspergillus niger is common on all inorganic materials.

Application of Ion Mobility Spectrometry and the Derived Collision Cross Section in the Analysis of Environmental Organic Micropollutants

Ion mobility spectrometry (IMS) is a rapid gas-phase separation technique, which can distinguish ions on the basis of their size, shape, and charge. The IMS-derived collision cross section (CCS) can serve as additional identification evidence for the screening of environmental organic micropollutants (OMPs). In this work, we summarize the published experimental CCS values of environmental OMPs, introduce the current CCS prediction tools, summarize the use of IMS and CCS in the analysis of environmental OMPs, and finally discussed the benefits of IMS and CCS in environmental analysis. An up-to-date CCS compendium for environmental contaminants was produced by combining CCS databases and data sets of particular types of environmental OMPs, including pesticides, drugs, mycotoxins, steroids, plastic additives, per- and polyfluoroalkyl substances (PFAS), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs), as well as their well-known transformation products. A total of 9407 experimental CCS values from 4170 OMPs were retrieved from 23 publications, which contain both drift tube CCS in nitrogen (DTCCSN2) and traveling wave CCS in nitrogen (TWCCSN2). A selection of publicly accessible and in-house CCS prediction tools were also investigated; the chemical space covered by the training set and the quality of CCS measurements seem to be vital factors affecting the CCS prediction accuracy. Then, the applications of IMS and the derived CCS in the screening of various OMPs were summarized, and the benefits of IMS and CCS, including increased peak capacity, the elimination of interfering ions, the separation of isomers, and the reduction of false positives and false negatives, were discussed in detail. With the improvement of the resolving power of IMS and enhancements of experimental CCS databases, the practicability of IMS in the analysis of environmental OMPs will continue to improve.

The air and dust invisible mycobiome of urban domestic environments

Air and dust harbor a dynamic fungal biome that interacts with residential environment inhabitants usually with negative implications for human health. Fungal air and dust synthesis were investigated in houses across the Athens Metropolitan area. Active and passive culture dependent methods were employed to sample airborne and dustborne fungi for two sampling periods, one in winter and the other in summer. A core mycobiome was revealed both in air and dust constituted of the dominant Penicillium, Cladosporium, Aspergillus, Alternaria and yeasts and accompanied by several common and rare components. Penicillium and Aspergillus diversity included 22 cosmopolitan species, except the rarely found Penicillium citreonigrum, P. corylophilum, P. pagulum and Talaromyces albobiverticillius which are reported for the first time from Greece. Fungal concentrations were significantly higher during summer for both air and dust. Excessive levels of inhalable aerosol constituted mainly by certain Penicillium species were associated with indoor emission sources as these species are household molds related to food commodities rot. The ambient air fungal profile is a determinant factor of indoor fungal aerosol which subsequently shapes dustborne mycobiota. Indoor fungi can be useful bioindicators for indoor environment quality and at the same time provide insight to indoor fungal ecology.

A comprehensive review of microbial contamination in the indoor environment: sources, sampling, health risks, and mitigation strategies

The quality of the indoor environment significantly impacts human health and productivity, especially given the amount of time individuals spend indoors globally. While chemical pollutants have been a focus of indoor air quality research, microbial contaminants also have a significant bearing on indoor air quality. This review provides a comprehensive overview of microbial contamination in built environments, covering sources, sampling strategies, and analysis methods. Microbial contamination has various origins, including human occupants, pets, and the outdoor environment. Sampling strategies for indoor microbial contamination include air, surface, and dust sampling, and various analysis methods are used to assess microbial diversity and complexity in indoor environments. The review also discusses the health risks associated with microbial contaminants, including bacteria, fungi, and viruses, and their products in indoor air, highlighting the need for evidence-based studies that can relate to specific health conditions. The importance of indoor air quality is emphasized from the perspective of the COVID-19 pandemic. A section of the review highlights the knowledge gap related to microbiological burden in indoor environments in developing countries, using India as a representative example. Finally, potential mitigation strategies to improve microbiological indoor air quality are briefly reviewed.

Xerophilic fungi contaminating historically valuable easel paintings from Slovenia

Historically valuable canvas paintings are often exposed to conditions enabling microbial deterioration. Painting materials, mainly of organic origin, in combination with high humidity and other environmental conditions, favor microbial metabolism and growth. These preconditions are often present during exhibitions or storage in old buildings, such as churches and castles, and also in museum storage depositories. The accumulated dust serves as an inoculum for both indoor and outdoor fungi. In our study, we present the results on cultivable fungi isolated from 24 canvas paintings, mainly exhibited in Slovenian sacral buildings, dating from the 16th to 21st centuries. Fungi were isolated from the front and back of damaged and undamaged surfaces of the paintings using culture media with high- and low-water activity. A total of 465 isolates were identified using current taxonomic DNA markers and assigned to 37 genera and 98 species. The most abundant genus was Aspergillus, represented by 32 species, of which 9 xerophilic species are for the first time mentioned in contaminated paintings. In addition to the most abundant xerophilic A. vitricola, A. destruens, A. tardicrescens, and A. magnivesiculatus, xerophilic Wallemia muriae and W. canadensis, xerotolerant Penicillium chrysogenum, P. brevicompactum, P. corylophilum, and xerotolerant Cladosporium species were most frequent. When machine learning methods were used to predict the relationship between fungal contamination, damage to the painting, and the type of material present, proteins were identified as one of the most important factors and cracked paint was identified as a hotspot for fungal growth. Aspergillus species colonize paintings regardless of materials, while Wallemia spp. can be associated with animal fat. Culture media with low-water activity are suggested in such inventories to isolate and obtain an overview of fungi that are actively contaminating paintings stored indoors at low relative humidity.

Exposure levels of animal allergens, endotoxin, and β-(1,3)-glucan on a university campus of veterinary medicine

OBJECTIVES

The study aimed to determine the allergen, endotoxin and β-(1,3)-glucan concentrations at various areas on a university campus of veterinary medicine.

METHODS

Dust samples were collected four times a year for three years using electrostatic dust collectors (EDC) at 25 different locations on a campus of veterinary medicine and in laboratories of inorganic chemistry as a control area representing animal-free environment. Major animal allergens from dog, cat, horse, cattle and mouse, domestic mite (DM) allergens, and β-(1,3)-glucan were measured using enzyme immunoassays and endotoxin using the limulus amoebocyte lysate (LAL) assay. Seasonal, annual and local influences on exposure levels were analyzed using Bayesian mixed models.

RESULTS

With the exception of mouse allergens, all other determinants were found in almost all locations on the campus and in the control area, but in up to 10.000-fold variable concentrations. By far the highest levels of feline, canine, equine and bovine allergens were detected in buildings where the respective species were examined. The highest levels of mouse and DM allergens, β-(1,3)-glucan and endotoxin occurred together and were associated with locations where large animals were present. In buildings without animals, allergen levels were considerably lower but still elevated at several locations compared to the control area, especially for dog and horse allergens, and β-(1,3)-glucan. Significant seasonal effects were observed for dog, cat, horse and DM allergens, and β-(1,3)-glucan. Variations between years were less apparent than between seasons (except for β-(1,3)-glucan).

CONCLUSIONS

The strongest influencing factor on the concentration of mammalian allergens was the presence of the corresponding animal at the collection site. Seasonal influence on allergen concentrations was observed, while the overall exposure remained constant over the years. At locations with horses, elevated levels of mite allergens, endotoxin, and β-(1,3)-glucan can be expected, probably due to passive transfer from stable environment.

Current Insights in Fungal Importance-A Comprehensive Review

Besides plants and animals, the Fungi kingdom describes several species characterized by various forms and applications. They can be found in all habitats and play an essential role in the excellent functioning of the ecosystem, for example, as decomposers of plant material for the cycling of carbon and nutrients or as symbionts of plants. Furthermore, fungi have been used in many sectors for centuries, from producing food, beverages, and medications. Recently, they have gained significant recognition for protecting the environment, agriculture, and several industrial applications. The current article intends to review the beneficial roles of fungi used for a vast range of applications, such as the production of several enzymes and pigments, applications regarding food and pharmaceutical industries, the environment, and research domains, as well as the negative impacts of fungi (secondary metabolites production, etiological agents of diseases in plants, animals, and humans, as well as deteriogenic agents).

Deciphering the distribution of microbial communities and potential pathogens in the household dust

The reliance of modern society on indoor environments increasing has made them crucial sites for human exposure to microbes. Extensive research has identified ecological drivers that influence indoor microbial assemblages. However, few studies have examined the dispersion of microbes in different locations of identical indoor environments. In this study, we employed PacBio Sequel full-length amplicon sequencing to examine the distribution of microbes at distinct locations in a single home and to identify the potential pathogens and microbial functions. Microbial communities differed considerably among the indoor sampling sites (P < 0.05). In addition, bacterial diversity was influenced by human activities and contact with the external environment at different sites, whereas fungal diversity did not significantly differ among the sites. Potential pathogens, including bacteria and fungi, were significantly enriched on the door handle (P < 0.05), suggesting that door handles may be hotpots for potential pathogens in the household. A high proportion of fungal allergens (34.37 %-56.50 %), which can cause skin diseases and asthma, were observed. Co-occurrence network analysis revealed the essential ecological role of microbial interactions in the development of a healthy immune system. Overall, we revealed the differences in microbial communities at different sampling sites within a single indoor environment, highlighting the distribution of potential pathogens and ecological functions of microbes, and providing a new perspective and information for assessing indoor health from a microbiological viewpoint.

Associations between environmental characteristics, high-resolution indoor microbiome, metabolome and allergic and non-allergic rhinitis symptoms for junior high school students

Rhinitis is one of the most prevalent chronic diseases globally. Microbiome exposure affects the occurrence of rhinitis. However, previous studies did not differentiate allergic rhinitis (AR) and non-allergic rhinitis (NAR) in the microbial association analysis. In this study, we investigate 347 students in 8 junior high schools, Terengganu, Malaysia, who were categorized as healthy (70.9%), AR (13.8%) and NAR (15.3%) based on a self-administered questionnaire and skin prick tests of pollen, pet, mould and house dust mite allergens. Classroom microbial and metabolite exposure in vacuumed dust was characterized by PacBio long-read amplicon sequencing, quantitative PCR and LC-MS-based untargeted metabolomics. Our findings indicate a similar microbial association pattern between AR and NAR. The richness in Gammaproteobacteria was negatively associated with AR and NAR symptoms, whereas total fungal richness was positively associated with AR and NAR symptoms (p < 0.05). Brasilonema bromeliae and Aeromonas enteropelogenes were negatively associated with AR and NAR, and Deinococcus was positively associated with AR and NAR (p < 0.01). Pipecolic acid was protectively associated with AR and NAR symptoms (OR = 0.06 and 0.13, p = 0.009 and 0.045). A neural network analysis showed that B. bromeliae was co-occurring with pipecolic acid, suggesting that the protective role of this species may be mediated by releasing pipecolic acid. Indoor relative humidity and the weight of vacuum dust were associated with AR and NAR, respectively (p < 0.05), but the health effects were mediated by two protective bacterial species, Aliinostoc morphoplasticum and Ilumatobacter fluminis. Overall, our study reported a similar microbial association pattern between AR and NAR and also revealed the complex interactions between microbial species, environmental characteristics, and rhinitis symptoms.

International consensus statement on allergy and rhinology: Allergic rhinitis - 2023

BACKGROUND

In the 5 years that have passed since the publication of the 2018 International Consensus Statement on Allergy and Rhinology: Allergic Rhinitis (ICAR-Allergic Rhinitis 2018), the literature has expanded substantially. The ICAR-Allergic Rhinitis 2023 update presents 144 individual topics on allergic rhinitis (AR), expanded by over 40 topics from the 2018 document. Originally presented topics from 2018 have also been reviewed and updated. The executive summary highlights key evidence-based findings and recommendation from the full document.

METHODS

ICAR-Allergic Rhinitis 2023 employed established evidence-based review with recommendation (EBRR) methodology to individually evaluate each topic. Stepwise iterative peer review and consensus was performed for each topic. The final document was then collated and includes the results of this work.

RESULTS

ICAR-Allergic Rhinitis 2023 includes 10 major content areas and 144 individual topics related to AR. For a substantial proportion of topics included, an aggregate grade of evidence is presented, which is determined by collating the levels of evidence for each available study identified in the literature. For topics in which a diagnostic or therapeutic intervention is considered, a recommendation summary is presented, which considers the aggregate grade of evidence, benefit, harm, and cost.

CONCLUSION

The ICAR-Allergic Rhinitis 2023 update provides a comprehensive evaluation of AR and the currently available evidence. It is this evidence that contributes to our current knowledge base and recommendations for patient evaluation and treatment.

Differential effects of exposure to toxic or nontoxic mold spores on brain inflammation and Morris water maze performance

People who live or work in moldy buildings often complain of "brain fog" that interferes with cognitive performance. Until recently, there was no published research on the effects of controlled exposure to mold stimuli on cognitive function or an obvious mechanism of action, fueling controversy over these claims. The constellation of health problems reported by mold-exposed individuals (respiratory issues, fatigue, pain, anxiety, depression, and cognitive deficits) correspond to those caused by innate immune activation following exposure to bacterial or viral stimuli. To determine if mold-induced innate immune activation might cause cognitive issues, we quantified the effects of both toxic and nontoxic mold on brain immune activation and spatial memory in the Morris water maze. We intranasally administered either 1) intact, toxic Stachybotrys chartarum spores; 2) ethanol-extracted, nontoxic Stachybotrys chartarum spores; or 3) control saline vehicle to mice. Inhalation of nontoxic spores caused significant deficits in the test of long-term memory of platform location, while not affecting short-term memory. Inhalation of toxic spores increased motivation to reach the platform. Interestingly, in both groups of mold-exposed males, numbers of interleukin-1β-immunoreactive cells in many areas of the hippocampus significantly correlated with latency to find the platform, path length, and swimming speed during training, but not during testing for long-term memory. These data add to our prior evidence that mold inhalation can interfere with cognitive processing in different ways depending on the task, and that brain inflammation is significantly correlated with changes in behavior.

Combined Toxicity of the Most Common Indoor Aspergilli

The most common Aspergilli isolated from indoor air samples from occupied buildings and a grain mill were extracted and analyzed for their combined (Flavi + Nigri, Versicolores + Nigri) cytotoxic, genotoxic and pro-inflammatory properties on human adenocarcinoma cells (A549) and monocytic leukemia cells induced in macrophages (THP-1 macrophages). Metabolite mixtures from the Aspergilli series Nigri increase the cytotoxic and genotoxic potency of Flavi extracts in A549 cells suggesting additive and/or synergistic effects, while antagonizing the cytotoxic potency of Versicolores extracts in THP-1 macrophages and genotoxicity in A549 cells. All tested combinations significantly decreased IL-5 and IL-17, while IL-1β, TNF-α and IL-6 relative concentrations were increased. Exploring the toxicity of extracted Aspergilli deepens the understanding of intersections and interspecies differences in events of chronic exposure to their inhalable mycoparticles.

Abundance and cultivable bioaerosol transport from a municipal solid waste landfill area and its risks

Municipal solid waste (MSW) landfills, constituting the third largest anthropogenic sources of bioaerosols, are suspected to be one of the major contributors to adverse health outcomes. A regional modeling of aerosol trajectories based on wind-tunnel observations and on-site monitoring was newly-developed to uncover the impacts of a typical MSW landfill on ambient bioaerosol pollution. Results showed that the horizontal diffusion velocity of bioaerosols reached 4.33 times higher than the vertical velocity under surface calm winds. On-site monitoring revealed that the concentrations of particulate matter (PM) with a diameter of 10 μm were 3.05 times higher than those of PM1.0 in the 2.8-km downwind residential regions near the MSW landfill. With the increase in PM concentration, higher-abundance microorganisms were detected. A number of cultivable bacterial species (Micrococcus endophyticus, Micrococcus flavus, Bacillus sporothermodurans, Salmonella entericaserovar typhi, Rhodococcus hoagie, Blastococcups) and fungal species (Aspergillus niger, Penicillium, Microascus cirrosus, Cochliobolus, Stemphylium vesicarium) were identified in these bioaerosols. Furthermore, distinguished by transmission electron microscopy, a longer-range transported microorganism (E. coli) clinging onto suspended PM was observed, signifying higher exposure risks. Human health risk assessments demonstrate that the residents and occupational workers in the vicinity of MSW landfill endured atmospheric diffusion-induced bioaerosol exposure risks due to open dumping activities in MSW landfill. This study clearly indicates bioaerosol pollution from landfills, and people particularly living nearby the MSW facilities, must decrease outdoor activities during dusty days.

Fungal Contamination of Building Materials and the Aerosolization of Particles and Toxins in Indoor Air and Their Associated Risks to Health: A Review

It is now well established that biological pollution is a major cause of the degradation of indoor air quality. It has been shown that microbial communities from the outdoors may significantly impact the communities detected indoors. One can reasonably assume that the fungal contamination of the surfaces of building materials and their release into indoor air may also significantly impact indoor air quality. Fungi are well known as common contaminants of the indoor environment with the ability to grow on many types of building materials and to subsequently release biological particles into the indoor air. The aerosolization of allergenic compounds or mycotoxins borne by fungal particles or vehiculated by dust may have a direct impact on the occupant’s health. However, to date, very few studies have investigated such an impact. The present paper reviewed the available data on indoor fungal contamination in different types of buildings with the aim of highlighting the direct connections between the growth on indoor building materials and the degradation of indoor air quality through the aerosolization of mycotoxins. Some studies showed that average airborne fungal spore concentrations were higher in buildings where mould was a contaminant than in normal buildings and that there was a strong association between fungal contamination and health problems for occupants. In addition, the most frequent fungal species on surfaces are also those most commonly identified in indoor air, regardless the geographical location in Europe or the USA. Some fungal species contaminating the indoors may be dangerous for human health as they produce mycotoxins. These contaminants, when aerosolized with fungal particles, can be inhaled and may endanger human health. However, it appears that more work is needed to characterize the direct impact of surface contamination on the airborne fungal particle concentration. In addition, fungal species growing in buildings and their known mycotoxins are different from those contaminating foods. This is why further in situ studies to identify fungal contaminants at the species level and to quantify their average concentration on both surfaces and in the air are needed to be better predict health risks due to mycotoxin aerosolization.

Determinants of bacterial and fungal microbiota in Finnish home dust: Impact of environmental biodiversity, pets, and occupants

The indoors is where many humans spend most of their time, and are strongly exposed to indoor microbiota, which may have multifaceted effects on health. Therefore, a comprehensive understanding of the determinants of indoor microbiota is necessary. We collected dust samples from 295 homes of families with young children in the Helsinki region of Finland and analyzed the bacterial and fungal composition based on the 16S rRNA and ITS DNA sequences. Microbial profiles were combined with extensive survey data on family structure, daily life, and physical characteristics of the home, as well as additional external environmental information, such as land use, and vegetational biodiversity near the home. Using permutational multivariate analysis of variance we explained 18% of the variation of the relative abundance between samples within bacterial composition, and 17% of the fungal composition with the explanatory variables. The fungal community was dominated by the phyla Basidiomycota, and Ascomycota; the bacterial phyla Proteobacteria, Firmicutes, Cyanobacteria, and Actinobacteria were dominant. The presence of dogs, multiple children, and firewood were significantly associated with both the fungal and bacterial composition. Additionally, fungal communities were associated with land use, biodiversity in the area, and the type of building, while bacterial communities were associated with the human inhabitants and cleaning practices. A distinction emerged between members of Ascomycota and Basidiomycota, Ascomycota being more abundant in homes with greater surrounding natural environment, and potential contact with the environment. The results suggest that the fungal composition is strongly dependent on the transport of outdoor environmental fungi into homes, while bacteria are largely derived from the inhabitants.

Impact of environmental factors and bacterial interactions on dust mite allergens in different indoor dust

Indoor dust is the main carrier of indoor pollutants, especially dust mite allergens and bacteria, they can trigger asthma, rhinitis, eczema and other allergic diseases. However, the interactions between dust mite allergens and bacterial communities in different types of indoor dust are not clear. The study focused on particulate and flocculent fibrous dust, explored the concentrations of Der p 1 (Dermatophagoides pteronyssinus) and Der f 1 (D. farinae) in 46 households in Changchun and their environmental influences, characterized the bacterial communities by high-throughput sequencing, and the interactions between Der p 1, Der f 1 and bacterial communities were explored. The results showed that Der p 1 and Der f 1 tended to accumulate more in flocculent fibrous dust, and Der p 1 predominated in the indoor dust samples. The floor height, years of housing occupancy and the living areas all affected the concentrations of dust mite allergens. In bacterial community, Proteobacteria, Firmicutes and Actinobacteria were leading phyla in the two types of dust. Kocuria, Blastococcus and Massilia were dominating genera in particulate dust and Acinetobacter, Lactobacillus, Corynebacterium_1 were dominating genera in flocculent fibrous dust. The overall diversity and species richness of bacteria in particulate dust were significantly higher than those in flocculent dust (p < 0.001). The living area was an important environmental factor affecting the bacterial community in flocculent fibrous dust (p < 0.01). The interaction between the relative abundance of Proteobacteria, Firmicutes and Actinobacteria and dust mite allergen concentrations significantly differed between the two dust types, indicating that bacteria could be used both as food and to establish symbiotic relationships with household dust mites (HDMs) hosts and provide nutrition.

New approach methods for assessing indoor air toxicity

Indoor air is typically a mixture of many chemicals at low concentrations without any adverse health effects alone, but in mixtures they may cause toxicity and risks to human health. The aim of this study was by using new approach methods to assess the potential toxicity of indoor air condensates. In specific, different in vitro test methods including cyto-and immunotoxicity, skin sensitization and endocrine disruption were applied. In addition to biological effects, the indoor air samples were subjected to targeted analysis of 25 volatile organic compounds (VOCs) and Genapol X-80 (a nonionic emulsifier) suspected to be present in the samples, and to a non-targeted "total chemical scan" to find out whether the chemical composition of the samples is associated with the biological effects. The results confirm that assessing health risks of indoor air by analysing individual chemicals is not an adequate approach: We were not able to detect the VOCs and Genapol X-80 in the indoor air samples, yet, several types of toxicity, namely, cytotoxicity, immunotoxicity, skin sensitization and endocrine disruption were detected. In the non-targeted total chemical scan of the indoor air samples, a larger number of compounds were found in the cytotoxic samples than in the non-cytotoxic samples supporting the biological findings. If only one biological method would be selected for the screening of indoor air quality, THP-1 macrophage/WST-1 assay would best fit for the purpose as it is sensitive and serves as a good representative for different sub-toxic end points, including immunotoxicity, (skin) sensitization and endocrine disruption.

Surface fungal diversity and several mycotoxin-related genes' expression profiles during the Lunar Palace 365 experiment

BACKGROUND

Chinese Lunar Palace 1 (LP1) is a ground-based bio-regenerative life support system (BLSS) test bed integrating highly efficient plant cultivation, animal protein production, urine nitrogen recycling, and bioconversion of solid waste. To date, there has been no molecular method-based detailed investigation of the fungal community and mycotoxin potential in BLSS habitats. To ensure safe BLSS design for actual space missions, we analyzed the LP1 surface mycobiome and mycotoxin potential during the Lunar Palace 365 project through internal transcribed spacer region 1 (ITS1) amplicon sequencing and quantitative polymerase chain reaction (qPCR) with primers specific for idh, ver1, nor1, tri5, and ITS1.

RESULTS

The LP1 system exhibited significant differences in fungal community diversity compared to other confined habitats, with higher fungal alpha diversity and different community structures. Significant differences existed in the surface fungal communities of the LP1 habitat due to the presence of different occupant groups. However, there was no significant difference between fungal communities in the plant cabin with various occupants. Source tracker analysis shows that most of the surface fungi in LP1 originated from plants. Regardless of differences in occupants or location, there were no significant differences in mycotoxin gene copy number.

CONCLUSIONS

Our study reveals that plants are the most crucial source of the surface fungal microbiome; however, occupant turnover can induce significant perturbations in the surface fungal community in a BLSS. Growing plants reduced fungal fluctuations, maintaining a healthy balance in the surface fungal microbiome and mycotoxin potential. Moreover, our study provides data important to (i) future risk considerations in crewed space missions with long-term residency, (ii) an optimized design and planning of a space mission that incorporates crew shifts and plant growth, and (iii) the expansion of our knowledge of indoor fungal communities with plant growth, which is essential to maintain safe working and living environments. Video Abstract.

Recent Advances in the Allergic Cross-Reactivity between Fungi and Foods

Airborne fungi are one of the most ubiquitous kinds of inhalant allergens which can result in allergic diseases. Fungi tend to grow in warm and humid environments with regional and seasonal variations. Their nomenclature and taxonomy are related to the sensitization of immunoglobulin E (IgE). Allergic cross-reactivity among different fungal species appears to be widely existing. Fungus-related foods, such as edible mushrooms, mycoprotein, and fermented foods by fungi, can often induce to fungus food allergy syndrome (FFAS) by allergic cross-reactivity with airborne fungi. FFAS may involve one or more target organs, including the oral mucosa, the skin, the gastrointestinal and respiratory tracts, and the cardiovascular system, with various allergic symptoms ranging from oral allergy syndrome (OAS) to severe anaphylaxis. This article reviews the current knowledge on the field of allergic cross-reactivity between fungal allergens and related foods, as well as the diagnosis and treatment on FFAS.

Indoor Air Quality in Elderly Centers: Pollutants Emission and Health Effects

The world population is ageing, in particular in the developed world, with a significant increase in the percentage of people above 60 years old. They represent a segment of the population that is more vulnerable to adverse environmental conditions. Among them, indoor air quality is one of the most relevant, as elders spend comparatively more time indoors than younger generations. Furthermore, the recent COVID-19 pandemic contributed immensely to raising awareness of the importance of breathing air quality for human health and of the fact that indoor air is a vector for airborne infections and poisoning. Hence, this work reviews the state of the art regarding indoor air quality in elderly centers, considering the type of pollutants involved, their emission sources, and their health effects. Moreover, the influence of ventilation on air quality is also addressed. Notwithstanding the potential health problems with the corresponding costs and morbidity effects, only a few studies have considered explicitly indoor air quality and its impacts on elderly health. More studies are, therefore, necessary to objectively identify what are the impacts on the health of elderly people due to the quality of indoor air and how it can be improved, either by reducing the pollutants emission sources or by more adequate ventilation and thermal comfort strategies.

Insights into the Profile of the Human Expiratory Microbiota and Its Associations with Indoor Microbiotas

Microorganisms residing in the human respiratory tract can be exhaled, and they constitute a part of environmental microbiotas. However, the expiratory microbiota community and its associations with environmental microbiotas remain poorly understood. Here, expiratory bacteria and fungi and the corresponding microbiotas from the living environments were characterized by DNA amplicon sequencing of residents' exhaled breath condensate (EBC) and environmental samples collected from 14 residences in Nanjing, China. The microbiotas of EBC samples, with a substantial heterogeneity, were found to be as diverse as those of skin, floor dust, and airborne microbiotas. Model fitting results demonstrated the role of stochastic processes in the assembly of the expiratory microbiota. Using a fast expectation-maximization algorithm, microbial community analysis revealed that expiratory microbiotas were differentially associated with other types of microbiotas in a type-dependent and residence-specific manner. Importantly, the expiratory bacteria showed a composition similarity with airborne bacteria in the bathroom and kitchen environments with an average of 12.60%, while the expiratory fungi showed a 53.99% composition similarity with the floor dust fungi. These differential patterns indicate different relationships between expiratory microbiotas and the airborne microbiotas and floor dust microbiotas. The results here illustrated for the first time the associations between expiratory microbiotas and indoor microbiotas, showing a potential microbial exchange between the respiratory tract and indoor environment. Thus, improved hygiene and ventilation practices can be implemented to optimize the indoor microbial exposome, especially in indoor bathrooms and kitchens.

Aerosolization of fungal spores in indoor environments

Fungi in indoor environments can cause adverse health effects through inhalation and epidermal exposure. The risk of fungal exposure originates from the aerosolization of fungal spores. However, spore aerosolization is still not well understood. This paper provides a review of indoor fungal contamination, especially the aerosolization of fungal spores. We attempted to summarize what is known today and to identify what more information is needed to predict the aerosolization of fungal spores. This paper first reviews fungal contamination in indoor environments and HVAC systems. The detachment of fungal spores from colonies and the spore aerosolization principle are then summarized. Based on the above discussion, prediction methods for spore aerosolization are discussed. This review further clarifies the current situation and future efforts required to accurately predict spore aerosolization. This information is useful for forecasting and controlling the aerosolization of fungal spores.

Airborne bacterial and fungal concentrations and fungal diversity in bedrooms of infant twins under 1 year of age living in Porto

Exposure to airborne microorganisms has been linked to the development of health detriments, particularly in children. Microbial pollution can constitute a relevant health concern indoors, where levels of airborne microorganisms may be specially increased. This work aimed to characterize the airborne bacterial levels, and fungal concentration and diversity to which twins are exposed in their bedrooms (n = 30) during the first year of life. Bacterial and fungal levels varied widely across the studied bedrooms, with 10% of the rooms presenting values exceeding the national limit for both indoor bacterial and fungal counts. Cladosporium was the predominant genera, but Penicillium, Aspergillus, Alternaria, Trichoderma and Chrysonilia were also identified in the samples collected. In addition, two toxicogenic species, A. flavus and T. viride, were identified at counts that exceeded the established limit (12 CFU/m³) in 3 and 7% of the bedrooms surveyed, respectively. Based on indoor-to-outdoor concentration ratios, outdoor air seemed to be the main contributor to the total load of fungi found indoors, while airborne bacteria appeared to be mainly linked to indoor sources. Higher indoor nitrogen dioxide levels were negatively correlated with indoor fungi concentrations, whereas particulate matter and volatile organic compounds concentrations were associated with an increase in fungal prevalence. In addition, rooms with small carpets or located near outdoor agriculture sources presented significantly greater total fungal concentrations. Multiple linear regression models showed that outdoor levels were the single significant predictor identified, explaining 38.6 and 53.6% of the Cladosporium sp. and total fungi counts, respectively. The results also suggest the existence of additional factors contributing to airborne biologicals load in infants' bedrooms that deserve further investigation. Findings stress the need for investigating the existence of declared interactive effects between chemical and biological air pollutants to accurately understand the health risk that the assessed levels can represent to infants.

What should be tested in patients with suspected mold exposure? Usefulness of serological markers for the diagnosis

The associations of mold exposure, IgE-mediated sensitization, inflammatory markers, and respiratory symptoms were analyzed in 46 exposed and 23 non-exposed individuals. Both exposure and clinical symptoms were assessed by questionnaire. Specific (s)IgE to mold mixture (mx1) was significantly higher and found more frequently in exposed (41%) than non-exposed individuals (17%), which was not observed for sIgG to mold mix (Gmx6). Notably, exposed asthmatics were more frequently sensitized to molds (55%) compared to exposed non-asthmatics (18%). In addition, the serum concentrations of club cell protein (CC16) were significantly lower in exposed subjects, especially in asthmatics. Positive associations were observed among mold sensitization, asthma, and mold exposure, but not in subjects with predominantly environmental sensitizations without mold sensitization. Thus, sIgE to mx1 but not sIgG to Gmx6 is a useful diagnostic marker to verify mold-associated respiratory symptoms.

Detection of Mycotoxins in Highly Matrix-Loaded House-Dust Samples by QTOF-HRMS, IM-QTOF-HRMS, and TQMS: Advantages and Disadvantages

The analysis of (trace) contaminants in environmental samples represents an important tool for exposure assessment and for the evaluation of potential risks to human health. Currently, mass spectrometric detection using triple quadrupole (TQMS) systems is the established method of choice. However, screening methods using high resolution mass spectrometry (HRMS) find increasing application as they provide advantages such as enhanced selectivity. A complex composition of environmental samples is known to have enormous effects on mass analyzers. The present work therefore compares the impact of a highly matrix-loaded sample material like house-dust on the performance of mass spectrometric detection of the emerging indoor contaminant group of mycotoxins by quadrupole time-of-flight (QTOF) and TQMS after ultrahigh-performance liquid chromatographic separation. Furthermore, the role of ionization efficiencies of different ion sources in instrument sensitivity was compared using an electrospray ionization source and a newly developed heated electrospray ion source (Bruker VIP-HESI) during QTOF experiments. Finally, it was evaluated whether an additional dimension of separation enables increased sensitivity in QTOF-HRMS detection by applying mycotoxins in house-dust to an (trapped) ion mobility spectrometry instrument. The sensitivity of the QTOF detection was positively influenced by the application of the VIP-HESI ion source, and overall HRMS instruments provided enhanced selectivity resulting in simplified data evaluation compared to the TQMS. However, all performed experiments revealed strong signal suppression due to matrix components. QTOF results showed more severe effects, enabling a more sensitive detection of mycotoxins in house-dust by applying TQMS detection.

Indoor microbiome, air pollutants and asthma, rhinitis and eczema in preschool children - A repeated cross-sectional study

BACKGROUND

Indoor microbiome exposure is associated with asthma, rhinitis and eczema. However, no studies report the interactions between environmental characteristics, indoor microbiome and health effects in a repeated cross-sectional framework.

METHODS

1,279 and 1,121 preschool children in an industrial city (Taiyuan) of China were assessed for asthma, rhinitis and eczema symptoms in 2012 and 2019 by self-administered questionnaires, respectively. Bacteria and fungi in classroom vacuum dust were characterized by culture-independent amplicon sequencing. Multi-level logistic/linear regression was performed in two cross-sectional and two combined models to assess the associations.

RESULTS

The number of observed species in bacterial and fungal communities in classrooms increased significantly from 2012 to 2019, and the compositions of the microbial communities were drastically changed (p < 0.001). The temporal microbiome variation was significantly larger than the spatial variation within the city (p < 0.001). Annual average outdoor SO₂ concentration decreased by 60.7%, whereas NO₂ and PM₁₀ concentrations increased by 63.3% and 40.0% from 2012 to 2019, which were both associated with indoor microbiome variation (PERMANOVA p < 0.001). The prevalence of asthma (2.0% to 3.3%, p = 0.06) and rhinitis (28.0% to 25.3%, p = 0.13) were not significantly changed, but the prevalence of eczema was increased (3.6% to 7.0%; p < 0.001). Aspergillus subversicolor, Collinsella and Cutibacterium were positively associated with asthma, rhinitis and eczema, respectively (p < 0.01). Prevotella, Lactobacillus iners and Dolosigranulum were protectively (negatively) associated with rhinitis (p < 0.01), consistent with previous studies in the human respiratory tract. NO₂ and PM₁₀ concentrations were negatively associated with rhinitis in a bivariate model, but a multivariate mediation analysis revealed that Prevotella fully mediated the health effects.

CONCLUSIONS

This is the first study to report the interactions between environmental characteristics, indoor microbiome and health in a repeated cross-sectional framework. The mediating effects of indoor microorganisms suggest incorporating biological with chemical exposure for a comprehensive exposure assessment.

The indoor mycobiome of daycare centers is affected by occupancy and climate

Many children spend considerable time in daycare centers and may be influenced by the indoor microorganisms there, including fungi. In this study, we investigate the indoor mycobiomes of 125 daycare centers distributed along strong environmental gradients throughout Norway. Dust samples were collected from doorframes outside and inside buildings using a community science sampling approach. Fungal communities in the dust samples were analyzed using DNA metabarcoding of the internal transcribed spacer 2 (ITS2) region. We observed a marked difference between the outdoor and indoor mycobiomes. The indoor mycobiomes included considerably more yeasts and molds than the outdoor samples, with Saccharomyces, Mucor, Malassezia, and Penicillium being among the most dominant fungal genera. Changes in the indoor fungal richness and composition correlated with numerous variables related to both outdoor and indoor conditions; there was a clear geographic structure in the indoor mycobiome composition that mirrored the outdoor climate, ranging from humid areas in western Norway to drier and colder areas in eastern Norway. Moreover, the number of children in the daycare centers, as well as various building features, influenced the indoor mycobiome composition. We conclude that the indoor mycobiomes in Norwegian daycare centers are structured by multiple factors and are dominated by yeasts and molds. This study exemplifies how community science sampling enables DNA-based analyses of a high number of samples covering wide geographic areas.

IMPORTANCE With an alarming increase in chronic diseases like childhood asthma and allergies, there is an increased focus on the exposure of young children to indoor biological and chemical air pollutants. Our study of 125 daycares throughout Norway demonstrates that the indoor mycobiome not only reflects cooccurring outdoor fungi but also includes a high abundance of yeast and mold fungi with an affinity for indoor environments. A multitude of factors influence the indoor mycobiomes in daycares, including the building type, inhabitants, as well as the outdoor environment. Many of the detected yeasts and molds are likely associated with the human body, where some have been coupled with allergies and respiratory problems. Our results call for further studies investigating the potential impact of the identified daycare-associated mycobiomes on children’s health.

Pathogen Control in the Built Environment: A Probiotic-Based System as a Remedy for the Spread of Antibiotic Resistance

The high and sometimes inappropriate use of disinfectants and antibiotics has led to alarming levels of Antimicrobial Resistance (AMR) and to high water and hearth pollution, which today represent major threats for public health. Furthermore, the current SARS-CoV-2 pandemic has deeply influenced our sanitization habits, imposing the massive use of chemical disinfectants potentially exacerbating both concerns. Moreover, super-sanitation can profoundly influence the environmental microbiome, potentially resulting counterproductive when trying to stably eliminate pathogens. Instead, environmentally friendly procedures based on microbiome balance principles, similar to what applied to living organisms, may be more effective, and probiotic-based eco-friendly sanitation has been consistently reported to provide stable reduction of both pathogens and AMR in treated-environments, compared to chemical disinfectants. Here, we summarize the results of the studies performed in healthcare settings, suggesting that such an approach may be applied successfully also to non-healthcare environments, including the domestic ones, based on its effectiveness, safety, and negligible environmental impact.

Comparative effects of environmental factors on bacterial communities in two types of indoor dust: Potential risks to university students

University students are constantly exposed to potential bacterial pathogens and environmental pollutants in indoor environment because they spend most of their time indoors. University dormitory and printing shop are two typical indoor environments frequented by university students. However, little is known about the characteristics of bacterial community as well as the effect of indoor environmental factors on them. 16S rRNA gene sequencing was used to reveal the bacterial community in indoor dust, electronic devices were recorded during dust sampling, and polybrominated diphenyl ethers (PBDEs) were detected by gas chromatography mass spectrometry (GC-MS). Proteobacteria, Actinobacteria and Firmicutes were leading phyla, and Acinetobacter, Paracoccus and Kocuria were dominating genera. The predominant genera showed Acinetobacter > Paracoccus > unidentified Corynebacteriaceae in indoor dusts from university dormitories, whereas Paracoccus > unidentified Cyanobacteria > Acinetobacter in printing shops. The occurrence of Acinetobacter, Kocuria, Corynebacterium, Pseudomonas, and Bacillus suggested the health risks of potential pathogenic bacteria to university students. Significant differences of microbial composition and diversity were proved between university dormitories and printing shops. Chemoheterotrophy and aerobic chemoheterotrophy were dominant bacterial functions, and the seven primary bacterial functions displayed university dormitory > printing shop. BDE 138 and BDE 66 were main environmental parameters affecting the indoor dust bacterial community in university dormitory, while printer and BDE 47 played dominating role in shaping microorganism in printing shop. The complex biotic (potential bacterial pathogens) and abiotic factors (electronic equipment and chemical pollutants) in indoor dusts may pose potential health risks to university students.

Toxicological transcriptome of human airway constructs after exposure to indoor air particulate matter: In search of relevant pathways of moisture damage-associated health effects

BACKGROUND

Multiple health effects are associated with moisture damage in buildings. Studies explaining these associations and cell-level mechanisms behind the observed health effects are urgently called for.

OBJECTIVES

We focused on characterizing gene expression in human airway epithelium after exposure to indoor air particulate matter (PM) sampled from houses with and without moisture damage, alongside determination of general toxicological markers.

METHODS

We performed detailed technical building inspections in 25 residential houses and categorized them based on the detection of moisture damages and the probability of occupant exposure. PM sampling was complemented by microbiological and volatile organic compound assessment. We exposed human airway constructs to three dilutions (1:16, 1:8, 1:4) of collected PM from moisture-damaged (index) and non-moisture-damaged (reference) houses and imaged selected constructs with electron microscopy. We analyzed general toxicological markers and the RNA of exposed constructs was sequenced targeting genes associated with toxicological pathways. We did groupwise comparisons between index and reference houses and pairwise comparisons in matched index/reference houses.

RESULTS

In groupwise comparison, gene Cytochrome P450 Family 1 Subfamily A Member 1 (CYP1A1) was statistically significantly over-expressed in index houses at all dilutions of collected PM and Nuclear Factor Kappa B Subunit 1 (NFKB1) at dilution 1:4 of collected PM. In pairwise index/reference house comparison, several genes related to multiple toxicological pathways were activated, largest expression differences seen for CYP1A1. However, none of the genes was consistently expressed in all the matched pairs, and general toxicological markers did not differentiate index and reference houses.

DISCUSSION

The exposure to PM from index houses activated toxicology -related genes in airway constructs. Differential expression was not consistent among all the index/reference pairs, possibly due to compositional differences of bioactive particles. Our study highlights CYP1A1 and NFKB1 as potential targets in moisture damage -associated cellular responses.

Spatiotemporal variation of the indoor mycobiome in daycare centers

BACKGROUND

Children spend considerable time in daycare centers in parts of the world and are exposed to the indoor micro- and mycobiomes of these facilities. The level of exposure to microorganisms varies within and between buildings, depending on occupancy, climate, and season. In order to evaluate indoor air quality, and the effect of usage and seasonality, we investigated the spatiotemporal variation in the indoor mycobiomes of two daycare centers. We collected dust samples from different rooms throughout a year and analyzed their mycobiomes using DNA metabarcoding.

RESULTS

The fungal community composition in rooms with limited occupancy (auxiliary rooms) was similar to the outdoor samples, and clearly different from the rooms with higher occupancy (main rooms). The main rooms had higher abundance of Ascomycota, while the auxiliary rooms contained comparably more Basidiomycota. We observed a strong seasonal pattern in the mycobiome composition, mainly structured by the outdoor climate. Most markedly, basidiomycetes of the orders Agaricales and Polyporales, mainly reflecting typical outdoor fungi, were more abundant during summer and fall. In contrast, ascomycetes of the orders Saccharomycetales and Capnodiales were dominant during winter and spring.

CONCLUSIONS

Our findings provide clear evidences that the indoor mycobiomes in daycare centers are structured by occupancy as well as outdoor seasonality. We conclude that the temporal variability should be accounted for in indoor mycobiome studies and in the evaluation of indoor air quality of buildings. Video abstract.

Outdoor Mold and Respiratory Health: State of Science of Epidemiological Studies

BACKGROUND

Fungal spores are the predominant biological particulates in outdoor air. However, in contrast to pollens or outdoor air pollution, little is known about their respiratory health risks.

OBJECTIVES

The objectives were to conduct the first review of epidemiological studies on the short- and long-term effects of outdoor mold exposure on respiratory health in children and adults.

METHODS

Health outcomes included asthma, lung function, and rhinitis. Cross-sectional and longitudinal epidemiological studies using quantitative measures of outdoor mold exposure (optical microscopy, culture-based methods) were selected, providing that important confounding factors including temporal trends or meteorological factors were accounted for. A systematic literature search was performed up to June 2020, leading to the selection of 37 publications.

RESULTS

Most studies were longitudinal and investigated short-term effects. There is evidence of an association between outdoor fungal exposure and an increase in asthma exacerbation among children for total spores, 2 phyla (ascomycetes, basidiomycetes), and 2 taxa (Cladosporium, Alternaria). A few studies also suggested an association for Coprinus, Ganoderma, Aspergillus-Penicillium, Botrytis, and Epicoccum in children, but this needs to be confirmed. Some studies reported mold associations with rhinitis, lung function, and among adults, but these were few in number or inconsistent.

DISCUSSION

Further ecological studies in different regions that measure exposure to all taxa over several years are required to better understand their impact on rhinitis, asthma exacerbations and lung function. Larger panel studies are necessary to identify threshold effects in susceptible individuals. Finally, further research should assess the long-term effects of outdoor mold.

Fungal populations in the bedroom dust of children in Havana, Cuba, and its relationship with environmental conditions

The study of the fungal community composition in house dust is useful to assess the accumulative exposure to fungi in indoor environments. The objective of this research was to characterize the fungal diversity of house dust and its association with the environmental conditions of bedrooms. For this, the dust was collected from 41 bedrooms of children between the ages of 8 and 9 with a family history of asthma, residents of Havana, Cuba. The fungal content of each sample was determined by two methods: plate culture with malt extract agar and by direct microscopy. An ecological analysis was carried out from the fungal diversity detected. To describe the factors associated with the fungi detected, bivariate logistic regression was used. Through direct microscopy, between 10 and 2311 fragments of hyphae and spores corresponding mainly to Cladosporium, Coprinus, Curvularia, Aspergillus/Penicillium, Xylariaceae, and Periconia were identified. Through the culture, 0-208 CFU were quantified, where Aspergillus, Cladosporium, and Penicillium predominated. The culturability evidenced the differences between the quantification determined by both methods. A positive relationship was found between the type of cleaning of the furniture, the presence of trees in front of the bedroom, indoor relative humidity, indoor temperature, the presence of air conditioning, and natural ventilation with specific spore types and genera. The use of two different identification methods allowed to detect a greater fungal diversity in the residences evaluated. Monitoring the exposure to these fungal allergens in childhood can help to prevent sensitization in the allergic child, the development of asthma, and other respiratory diseases.

Residential airborne culturable fungi under general living scenario: On-site investigation in 12 typical cities, China

BACKGROUND

Residential airborne fungi may present obvious risk to human health. However, many countries do not recognize the necessarily need to control residential airborne culturable fungi (RAF). In China, few systemic investigations have been conducted to illustrate the distribution of residential airborne fungi and identify the association between indoor influencing variables and RAF under general living scenario in China.

OBJECTIVE

This study aimed to investigate RAF with the on-site research of 12 typical cities in China, and provided the latest characteristics and potential influencing factors of RAF under general living scenario.

METHODS

We measured RAF and investigated residential characteristics in 12 typical cities in China, 2018. At least 50 resident families were randomly selected both from downwind and upwind districts in each city with pre-proposed requirements. The RAF were sampled by the six-stage Anderson impactor. PM_2.5 and PM₁₀ were monitored by calibrated light-scattering dust meters. CO and CO₂ were monitored by non-dispersive infrared analyzer method. NO₂ was determined by Saltzman method. General linear model was used to evaluate the association between RAF exposure and residential characteristics with adjustment for potential confounders.

RESULTS

The RAF concentrations ranged from 0 to 9371 CFU/m³ with a median concentration of 396 CFU/m³. The median concentrations of RAF in the warm season were statistically higher than the cold season in Panjin, Qingdao, Lanzhou and Luoyang, but lower than the cold season in Shijiazhuang, Ningbo and Nanning. RAF in the bedrooms were more than the living rooms in all cities except Xi'an. Temperature and humidity had an interactive effect on the RAF (OR = 1.0006, 95% CI: 1.0005, 1.0006). Some residential environmental pollutants, including PM_2.5 (OR = 0.9989, 95% CI: 0.9988, 0.9989), PM₁₀ (OR = 0.9993, 95% CI: 0.9993, 0.9993), and CO₂ (OR = 0.0236, 95% CI: 0.0230, 0.0243), were negatively correlated with RAF. CO (OR = 1.1450, 95% CI: 1.1433, 1.1467) and NO₂ (OR = 1.0026, 95% CI: 1.0024, 1.0028) were positively correlated with RAF. Architectural characteristics (sunlight exposure, building history, longitude, latitude, total living area, living floor, distance from the road, house type, the layers of window glass and decoration), family-related information (income) and lifestyle behaviors (keeping pets, growing plants, cooking, using insecticide, burning incense, heating, using air conditioner and cleaning frequencies) were also significantly related with RAF.

CONCLUSIONS

This study reported nation-wide baseline condition of RAF and related influencing factors under general living scenario with quantitative details, which are exceedingly promising for evidence-driven standard and reasonable control strategy of residential airborne culturable in China.

Associations between the indoor microbiome, environmental characteristics and respiratory infections in junior high school students of Johor Bahru, Malaysia

Pathogens are commonly present in the human respiratory tract, but symptoms are varied among individuals. The interactions between pathogens, commensal microorganisms and host immune systems are important in shaping the susceptibility, development and severity of respiratory diseases. Compared to the extensive studies on the human microbiota, few studies reported the association between indoor microbiome exposure and respiratory infections. In this study, 308 students from 21 classrooms were randomly selected to survey the occurrence of respiratory infections in junior high schools of Johor Bahru, Malaysia. Vacuum dust was collected from the floor, chairs and desks of these classrooms, and high-throughput amplicon sequencing (16S rRNA and ITS) and quantitative PCR were conducted to characterize the absolute concentration of the indoor microorganisms. Fifteen bacterial genera in the classes Actinobacteria, Alphaproteobacteria, and Cyanobacteria were protectively associated with respiratory infections (p < 0.01), and these bacteria were mainly derived from the outdoor environment. Previous studies also reported that outdoor environmental bacteria were protectively associated with chronic respiratory diseases, such as asthma, but the genera identified were different between acute and chronic respiratory diseases. Four fungal genera from Ascomycota, including Devriesia, Endocarpon, Sarcinomyces and an unclassified genus from Herpotrichillaceae, were protectively associated with respiratory infections (p < 0.01). House dust mite (HDM) allergens and outdoor NO₂ concentration were associated with respiratory infections and infection-related microorganisms. A causal mediation analysis revealed that the health effects of HDM and NO₂ were partially or fully mediated by the indoor microorganisms. This is the first study to explore the association between environmental characteristics, microbiome exposure and respiratory infections in a public indoor environment, expanding our understanding of the complex interactions among these factors.

Hyphal growth of Penicillium rubens in changing relative humidity

Abstract

When considering mold prevention strategies, the environmental conditions in which fungi grow need to be taken into consideration. This environment is often characterized by a time-dependent relative humidity, and porous substrate. Growth has mainly been investigated in steady-state experiments. Therefore, the goal of this study is to understand the hyphal growth of Penicillium rubens on porous gypsum, under dynamic humidity conditions. Spores of P. rubens were inoculated on porous gypsum containing nutrients, and placed in a small incubation chamber, allowing for microscopic hyphal observation. The relative humidity in this chamber varied multiple times between a high (close to 100%) and low value (35%, 55%, or 75%). The hyphae reacted to a lowered relative humidity by an immediate growth stop and dehydration. When the relative humidity was increased again, the hyphae re-hydrated and three responses were found: regrowing after approximately 4 h, after a time equal to the germination time, or no regrowth at all. No substantial regrowth was found for fluctuations faster than 4 h. This time-scale was found for multiple decreases in relative humidity, and has been reported for the first time.

Key points

• Hyphae restart growth after a characteristic time of approximately 4 h.

• Relative humidity fluctuations of 3 h can suppress hyphal growth.

• Hyphae do not regrow after a severe desiccation and short periods of high humidity.

Supplementary Information

The online version contains supplementary material available at 10.1007/s00253-021-11343-6.

Indoor Climate Performance in a Renovated School Building

Indoor climate comfort is important for school buildings. Nowadays, this is a topical problem, especially in renovated buildings. Poorly ventilated school classrooms create improper conditions for classrooms. A post-occupancy study was performed in a school building in temperate climatic conditions. The evaluation was based on the results of long-term monitoring of the natural ventilation strategy and measurements of the carbon dioxide concentration in the school classroom’s indoor environment. The monitoring was carried out in an old school building that was constructed in the 1970s and compared to testing carried out in the same school classroom after the building was renovated in 2016. Surprisingly, the renovated classroom had a significantly higher concentration of CO2. It was found that this was due to the regulation of the heating system and the new airtight windows. The occupants of the renovated classroom have a maintained thermal comfort, but natural ventilation is rather neglected. A controlled ventilation strategy and installation of heat recovery units are recommended to solve these problems with the classroom’s indoor environment. Microbiological testing of the surfaces in school classrooms also shows the importance of fresh air and solar radiation access for indoor comfort.

A novel qPCR based-method for detection and quantification of three recurrent species of Penicillium isolated from bioaerosols in mold-damaged homes

Fungal contamination of indoor environments can cause respiratory diseases and induce damages to building materials. Among the fungal species found in mold-damaged homes, Penicillium brevicompactum, P. chrysogenum and P. crustosum can be considered as recurrent strains. In this study, we therefore propose a rapid and novel qPCR-based method in order to allow the monitoring of these three fungal species. The method developed allows the quantification of the target DNA of these three Penicillium species with a limit of quantification of 0.01 ng/μL without significant difference with spectrophotometry quantification assay for DNA concentrations between 5 and 100 ng/μL. This technique also enables the rapid detection of these three species in complex mixtures of DNA extracted from 15 bioaerosols collected in mold-damaged homes and previously cultured on agar plate. This new sensitive and specific qPCR technique can thus be easily integrated into bioaerosol studies.

Analysing indoor mycobiomes through a large-scale citizen science study in Norway

In the built environment, fungi can cause important deterioration of building materials and have adverse health effects on occupants. Increased knowledge about indoor mycobiomes from different regions of the world, and their main environmental determinants, will enable improved indoor air quality management and identification of health risks. This is the first citizen science study of indoor mycobiomes at a large geographical scale in Europe, including 271 houses from Norway and 807 dust samples from three house compartments: outside of the building, living room and bathroom. The fungal community composition determined by DNA metabarcoding was clearly different between indoor and outdoor samples, but there were no significant differences between the two indoor compartments. The 32 selected variables, related to the outdoor environment, building features and occupant characteristics, accounted for 15% of the overall variation in community composition, with the house compartment as the key factor (7.6%). Next, climate was the main driver of the dust mycobiomes (4.2%), while building and occupant variables had significant but minor influences (1.4% and 1.1%, respectively). The house-dust mycobiomes were dominated by ascomycetes (⁓70%) with Capnodiales and Eurotiales as the most abundant orders. Compared to the outdoor samples, the indoor mycobiomes showed higher species richness, which is probably due to the mixture of fungi from outdoor and indoor sources. The main indoor indicator fungi belonged to two ecological groups with allergenic potential: xerophilic moulds and skin-associated yeasts. Our results suggest that citizen science is a successful approach for unravelling the built microbiome at large geographical scales.

Enhanced Antimould Action of Surface Modified Copper Oxide Nanoparticles with Phenylboronic Acid Surface Functionality

Antimould agents are widely used in different applications, such as specialty paints, building materials, wood preservation and crop protection. However, many antimould agents can be toxic to the environment. This work aims to evaluate the application of copper oxide nanoparticles (CuONPs) surface modified with boronic acid (BA) terminal groups as antimould agents. We developed CuONPs grafted with (3-glycidyloxypropyl) trimethoxysilane (GLYMO), coupled with 4-hydroxyphenylboronic acid (4-HPBA), which provided a strong boost of their action as antimould agents. We studied the antimould action of the 4-HPBA-functionalized CuONPs against two mould species: Aspergillus niger (A. niger) and Penicillium chrysogenum (P. chrysogenum). The cis-diol groups of polysaccharides expressed on the mould cell walls can form reversible covalent bonds with the BA groups attached on the CuONPs surface. This allowed them to bind strongly to the mould surface, resulting in a very substantial boost of their antimould activity, which is not based on electrostatic adhesion, as in the case of bare CuONPs. The impact of these BA-surface functionalized nanoparticles was studied by measuring the growth of the mould colonies versus time. The BA-functionalized CuONPs showed significant antimould action, compared to the untreated mould sample at the same conditions and period of time. These results can be applied for the development of more efficient antimould treatments at a lower concentration of active agent with potentially substantial economic and environmental benefits.

Settled dust assessment in clinical environment: useful for the evaluation of a wider bioburden spectrum

The collection and analysis of settled dust samples from indoor environments has become one of several environmental sampling methods used to assess bioburden indoors. The aim of the study was to characterize the bioburden in vacuumed settled dust from 10 Primary Health Care Centers by culture based and molecular methods. Results for bacterial load ranged from 1 to 12 CFU.g^-1 of dust and Gram-negative bacteria ranged between 1 to 344 CFU.g^-1 of dust. Fungal load ranged from 0 CFU.g^-1 of dust to uncountable. Aspergillus section Fumigati was detected in 4 sampling sites where culture base-methods could not identify this section. Mucorales (Rhizopus sp.) was observed on 1 mg/L voriconazole. Three out of 10 settled dust samples were contaminated by mycotoxins. Settled dust sampling coupled with air sampling in a routine way might provide useful information about bioburden exposure.

Temporal variation of airborne fungi in university library rooms and its relation to environmental parameters and potential confounders

Indoor airborne fungi have been associated with adverse human health effects. Therefore, it is important to understand the causes of underlying variation in airborne fungi in indoor environments. This study consequently aimed to investigate the association between indoor fungi with temporal variation, environmental parameters, and potential confounders over 10 months in four library rooms using Andersen samplers. Indoor fungal concentrations peaked in October and were lowest in March in both stack rooms, whereas the highest concentrations in both reading rooms were observed in September with lowest concentrations in July. Nonparametric analyses revealed higher fungal concentrations in the rooms that were significantly associated with relative humidity ≥ 60%, PM_2.5 ≥ 35 μg/m³, number of people ≥ 16, open windows, working air conditioners, and room area < 400 m². Multiple linear regression modeling for the library building considering only continuous variables revealed that relative humidity, PM_2.5, and the number of people were significant predictors of fungal concentrations. Additionally, the model with continuous and categorical variables suggested that relative humidity, PM_2.5, the number of people, ceiling fan condition, window state, and air conditioner operating status were significant predictor variables of concentrations. Outdoor fungal concentrations were a significant predictor for the two models of indoor fungal concentrations for each room. Ceiling fan or air conditioner operation was associated with altered fungal particle concentrations. These results provide a deeper understanding of indoor air fungal quality.

A Pilot Study on Baseline Fungi and Moisture Indicator Fungi in Danish Homes

In many complaint cases regarding bad indoor environments, there is no evidence of visible fungal growth. To determine if the problems are fungi-related, dust sampling is the method of choice among building surveyors. However, there is a need to differentiate between species belonging to a normal, dry indoor environment and species belonging to a damp building envelope. The purposes of this pilot study were to examine which fungal species are present in problem-free Danish homes and to evaluate different detection and identification methods. Analyses showed that the fungal diversity outside was different from the diversity inside and that the composition of fungal species growing indoors was different compared to those found as spores, both indoors and outdoors. Common for most homes were Pseudopithomyceschartarum, Cladosporiumallicinum and Alternaria sect. Infectoriae together with Botrytis spp., Penicilliumdigitatum and Pen. glabrum. The results show that ITS sequencing of dust samples is adequate if supported by thorough building inspections and that food products play as large a role in the composition of the baseline spora as the outdoor air and surrounding vegetation. This pilot study provides a list of baseline fungal species found in Danish homes with a good indoor environment.

Association between indoor microbiome exposure and sick building syndrome (SBS) in junior high schools of Johor Bahru, Malaysia

Sick building syndrome (SBS) is a collection of nonspecific syndromes linked with the built environment. The occurrence of SBS is associated with humidity, ventilation, moulds and microbial compounds exposure. However, no study has reported the association between indoor microbiome and SBS. In this study, 308 students were surveyed for SBS symptoms from 21 classrooms of 7 junior high schools from Johor Bahru, Malaysia, and vacuum dust from floor, desks and chairs was collected. High throughput amplicon sequencing (16S rRNA gene and ITS region) and quantitative PCR were conducted to characterize the absolute concentration of bacteria and fungi taxa. In total, 326 bacterial and 255 fungal genera were detected in dust with large compositional variation among classrooms. Also, half of these samples showed low compositional similarity to microbiome data deposited in the public database. The number of observed OTUs in Gammaproteobacteria was positively associated with SBS (p = 0.004). Eight microbial genera were associated with SBS (p < 0.01). Bacterial genera, Rhodomicrobium, Scytonema and Microcoleus, were protectively (negatively) associated with ocular and throat symptoms and tiredness, and Izhakiella and an unclassified genus from Euzebyaceae were positively associated with the throat and ocular symptoms. Three fungal genera, Polychaeton, Gympopus and an unclassified genus from Microbotryaceae, were mainly positively associated with tiredness. The associations differed with our previous study in microbial compounds (endotoxin and ergosterol) and SBS in the same population, in which nasal and dermal symptoms were affected. A higher indoor relative humidity and visible dampness or mould in classrooms were associated with a higher concentration of potential risk bacteria and a lower concentration of potential protective bacteria (p < 0.01). This is the first study to characterize the SBS-associated microorganisms in the indoor environment, revealing complex interactions between microbiome, SBS symptoms and environmental characteristics.

Microbiological indoor air quality in faculty's rooms: Risks on students' health

This study deals with a quantitative and qualitative analysis of indoor airborne microbiota and estimation of microbiological quality of indoor air in faculty's rooms during the summer semester of 2017/18 school year. The concentration of bacteria was significantly higher than the concentration of fungi. The species that belong to human skin microbiota or of environmental origin were identified. According to indoor air quality breakpoints, low to medium/high level of bacterial and fungal air contaminations was noticed.