The effect of dentine thickness on diffusion of resin monomers in vitro

Diffusion of Silver Diamine Fluoride Solution in Dentine: An In Vitro Study

OBJECTIVES

The aim of this research was to assess the diffusion dynamics of silver and fluoride ions after 38% silver diamine fluoride (SDF) solution application on dentine of varying thicknesses over 24 weeks.

METHODS

Bovine dentine discs of 5.5 mm in diameter were prepared and separated into 3 groups with thicknesses of 0.5 mm (group 1), 1.0 mm (group 2), and 1.5 mm (group 3). The diameter and number of dentinal tubules of discs were assessed. Each disc received a topical application of 0.05 mL 38% SDF solution. The deionised water in the tube was collected weekly for 24 weeks. The silver and the fluoride ion concentrations in the collected deionised water were determined. Generalised estimating equations was used to explore the potential effects of the key factors on the silver/fluoride diffusion.

RESULTS

The amount of silver and fluoride ion diffusion through dentine almost levelled off after 4 weeks and showed a decline trend over 24 weeks. The mean (SD) 24-week cumulative ion diffusion through dentine in groups 1, 2, and 3 was as follows: 20 (4) μg, 10 (2) μg, and 5 (1) μg for silver (P < .05) and 18 (2) μg, 13 (2) μg, and 7 (1) μg for fluoride (P < .05), respectively.

CONCLUSIONS

Silver and fluoride ion diffusion through dentine showed a decline trend over 24 weeks. The diameter and the number of dentinal tubules on dentine with different thicknesses affects the ion diffusion dynamics. This study provides indications on the pattern of silver/fluoride ions diffusion through dentine to pulp after 38% SDF application. An increased amount of silver/fluoride diffuses through dentine into the pulp with decreased remaining dentine thickness.

Transdentinal cytotoxicity of resin-based luting cements to pulp cells

OBJECTIVES

The aim of this study was to evaluate the transdentinal cytotoxicity of components released from different resin-based luting cements to cultured MDPC-23 odontoblast-like cells and human dental pulp cells (HDPCs).

MATERIALS AND METHODS

Artificial pulp chamber (APC)/dentin disc sets were distributed into four groups according to the materials tested (n = 10), as follows: G1, control (no treatment); G2, resin-modified glass-ionomer cement (RelyX Luting 2); G3, self-adhesive resin cement (RelyX U200); and G4, conventional resin cement (RelyX ARC). The materials were applied to the occlusal surfaces (facing up) of the dentin discs adapted to the APCs. The pulpal surfaces of the discs were maintained in contact with culture medium. Then, an aliquot of 400 μL from the extract (culture medium + resin-based components that diffused through dentin) of each luting cement was applied for 24 h to HDPCs or MDPC-23 cells previously seeded in wells of 24-well plates. Cell viability analysis was performed by the MTT assay (1-way ANOVA/Tukey test; α = 5 %).

RESULTS

For MDPC-23 cells, RelyX ARC (G4) and RelyX Luting 2 (G2) caused greater reduction in cell viability compared with the negative control group (P < 0.05). Only the HDPCs exposed to RelyX ARC (G4) extract showed a tendency toward viability decrease (9.3 %); however, the values were statistically similar to those of the control group (G1) (P > 0.05).

CONCLUSIONS

In accordance with the safe limits of ISO 10993-5:1999 (E) recommendations, all resin-based luting cements evaluated in this study can be considered as non-toxic to pulp cells.

CLINICAL RELEVANCE

Cytotoxicity of resin-based luting cements is material-dependent, and the different protocols for the application of these dental materials to dentin may interfere with their cytotoxicity.

A study of component release from resin pit and fissure sealants in vitro

OBJECTIVE

A recent study reported that an estrogenic chemical, bisphenol-A, was released from a fissure sealant. The aim of this study was to identify and quantify the major (or detectable) components released from any of seven commercially-available, light-cured pit and fissure sealants in vitro.

METHODS

The fissure systems of ten extracted, third molar teeth were filled with sealant, light-activated and immersed in separate containers of distilled water. Separate, cylindrical stainless steel molds were filled with sealant which was then light-activated and immersed. Each mold or tooth with sealant was moved to a new container of water at defined times and each remaining water sample (eluate) then analyzed by high performance liquid chromatography (HPLC).

RESULTS

Triethylene glycol dimethacrylate (TEGDMA) was present in all eluates from each of the sealants tested. 2,2-bis[4'-(2'-hydroxy-3'-methacryloyloxy)phenyl]propane (BisGMA) was detected at much lower levels (about one thousand-fold less) in eluates from one sealant only. Bisphenol-A was not detected in any eluates. The rates of TEGDMA and BisGMA release were highest on first immersion and decreased thereafter. The total amount of TEGDMA released was on the order of 0.25 mg per tooth. Most release occurred during the first day.

SIGNIFICANCE

Because bisphenol-A release could not be detected from any of the seven sealants tested, these results call into question earlier concerns expressed about possible adverse effects of bisphenol-A released from resin sealants.