An NMR-derived model for the solution structure of oxidized Thermotoga maritima 1[Fe4-S4] ferredoxin

The structure of the 2[4Fe-4S] ferredoxin from Pseudomonas aeruginosa at 1.32-A resolution: comparison with other high-resolution structures of ferredoxins and contributing structural features to reduction potential values

The structure of the 2[4Fe-4S] ferredoxin (PaFd) from Pseudomonas aeruginosa, which belongs to the Allochromatium vinosum (Alvin) subfamily, has been determined by X-ray crystallography at 1.32-A resolution, which is the highest up to now for a member of this subfamily of Fds. The main structural features of PaFd are similar to those of AlvinFd. However, the significantly higher resolution of the PaFd structure makes possible a reliable comparison with available high-resolution structures of [4Fe-4S]-containing Fds, in an effort to rationalize the unusual electrochemical properties of Alvin-like Fds. Three major factors contributing to the reduction potential values of [4Fe-4S]2+/+ clusters of Fds, namely, the surface accessibility of the clusters, the N-H...S hydrogen-bonding network, and the volume of the cavities hosting the clusters, are extensively discussed. The volume of the cavities is introduced in the present work for the first time, and can in part explain the very negative potential of cluster I of Alvin-like Fds.

A solution NMR molecular model for the aspartate-ligated, cubane cluster containing ferredoxin from the hyperthermophilic archeaon Pyrococcus furiosus

A solution molecular model for the conformationally dynamically heterogeneous Pyrococcus furiosus ferredoxin with an intact disulfide bond has been constructed on the basis of reported (1)H NMR spectral parameters using distance geometry and simulated annealing protocols. Conventional long-mixing time NOESY and H-bonding constraints have been augmented by previously reported short-mixing time NOESY, steady-state NOE, and cluster paramagnetism-induced relaxation. The family of 15 structures with inconsequential violations exhibited low rms deviations for backbone atoms for the overwhelming majority of the residues, including the cluster ligating loop with the unprecedented ligated Asp14. Larger rms deviations were observed across the disulfide bond, but closer inspection revealed that the 15 structures can be factored into 10 substructures exhibiting an "S" or right-handed disulfide orientation and 5 exhibiting an "R" or left-handed disulfide orientation. The remainder of the structure is indistinguishable for the two disulfide orientations but confirms stabilizing extensions of secondary structural elements in the lengthening of the long helix and both the lengthening and incorporation of a third strand into the beta-sheet involving the termini, with these extensions interacting strongly in a modular fashion through the rings of Tyr46 and Trp2. These extensions of stabilizing interactions in Pyrococcus furiosus Fd, however, lead to strong destabilization of the disulfide bond and destabilization of the highly conserved first and last beta-turns in the sequence. It is concluded that the structural alternations in Pyrococcus Fd relative to other hyperthermostable Fds are not to increase thermostability but to place "stress" on the disulfide bond and render it more reducible. The possible physiological implications of this unique reducible disulfide bond are discussed.

Solution NMR characterization of the thermodynamics of the disulfide bond orientational isomerism and its effect of cluster electronic properties for the hyperthermostable three-iron cluster ferredoxin from the archaeon Pyrococcus furiosus

The thermodynamics and dynamics of the Cys21-Cys48 disulfide "S" if "R" conformational isomerism in the three-iron, single cubane cluster ferredoxin (Fd) from the hyperthermophilic archaeon Pyrococcus furiosus (Pf) have been characterized by (1)H NMR spectroscopy in both water and water/methanol mixed solvents. The mean interconversion rate at 25 degrees C is 3 x 10(3) s(-1) and DeltaG(298) = -0.2 kcal/mol [DeltaH = 4.0 kcal/mol; DeltaS = 14 cal/(mol.K)], with the S orientation as the more stable form at low temperature (< 0 degrees C) but the R orientation predominating at >100 degrees C, where the organism thrives. The distinct pattern of ligated Cys beta-proton contact shifts for the resolved signals and their characteristic temperature behavior for the forms of the 3Fe Fd with alternate disulfide orientations have been analyzed to determine the influences of disulfide orientation and methanol cosolvent on the topology of the inter-iron spin coupling in the 3Fe cluster. The Cys21-Cys48 disulfide orientation influences primarily the spin couplings involving the iron ligated to Cys17, whose carbonyl oxygen is a hydrogen bond acceptor to the Cys21 peptide proton. Comparison of the Cys beta-proton contact shift pattern for the alternate disulfide orientations with the pattern exhibited upon cleaving the disulfide bridge confirms an earlier [Wang, P.-L., Calzolai, L., Bren, K. L., Teng, Q., Jenney, F. E., Jr., Brereton, P. S., Howard, J. B., Adams, M. W. W., and La Mar, G. N. (1999) Biochemistry 38, 8167-8178] proposal that the structure of the same Fd with the R disulfide orientation resembles that of the Fd upon cleaving the disulfide bond.

Sequence determination of reduction potentials by cysteinyl hydrogen bonds and peptide pipoles in [4Fe-4S] ferredoxins

A sequence determinant of reduction potentials is reported for bacterial [4Fe-4S]-type ferredoxins. The residue that is four residues C-terminal to the fourth ligand of either cluster is generally an alanine or a cysteine. In five experimental ferredoxin structures, the cysteine has the same structural orientation relative to the nearest cluster, which is stabilized by the SH...S bond. Although such bonds are generally considered weak, indications that Fe-S redox site sulfurs are better hydrogen-bond acceptors than most sulfurs include the numerous amide NH...S bonds noted by Adman and our quantum mechanical calculations. Furthermore, electrostatic potential calculations of 11 experimental ferredoxin structures indicate that the extra cysteine decreases the reduction potential relative to an alanine by approximately 60 mV, in agreement with experimental mutational studies. Moreover, the decrease in potential is due to a shift in the polar backbone stabilized by the SH...S bond rather than to the slightly polar cysteinyl side chain. Thus, these cysteines can "tune" the reduction potential, which could optimize electron flow in an electron transport chain. More generally, hydrogen bonds involving sulfur can be important in protein structure/function, and mutations causing polar backbone shifts can alter electrostatics and thus affect redox properties or even enzymatic activity of a protein.

Secondary structure extensions in Pyrococcus furiosus ferredoxin destabilize the disulfide bond relative to that in other hyperthermostable ferredoxins. Global consequences for the disulfide orientational heterogeneity

The single cubane cluster ferredoxin (Fd) from the hyperthermophilic archaeon Pyrococcus furiosus (Pf) possesses several unique properties when compared even to Fds from other hyperthermophilic archaea or bacteria. These include an equilibrium molecular heterogeneity, a six- to seven-residue increase in size, an Asp rather than the Cys as one cluster ligand, and a readily reducible disulfide bond. NMR assignments and determination of both secondary structure and tertiary contacts remote from the paramagnetic oxidized cluster of Pf 3Fe Fd with an intact disulfide bond reported previously (Teng Q., Zhou, Z. H., Smith, E. T., Busse, S. C., Howard, J. B. Adams, M. W. W., and La Mar, G. (1994) Biochemistry 33, 6316-6328) are extended here to the 4Fe oxidized cluster WT (1H and 15N) and D14C (1H only) Fds with an intact disulfide bond and to the 4Fe oxidized WT Fd (1H and 15N) with a cleaved disulfide bond. All forms are shown to possess a long (13-member) alpha-helix, two beta-sheets (one double-, one triple-stranded), and three turns outside the cluster vicinity, each with tertiary contacts among themselves as found in other Fds. While the same secondary structural elements, with similar tertiary contacts, are found in other hyperthermostable Fds, Pf Fd has two elements, the long helix and the triple-stranded beta-sheet, that exhibit extensions and form multiple tertiary contacts. All Pf Fd forms with an intact disulfide bond exhibit a dynamic equilibrium heterogeneity which is shown to modulate a hydrogen-bonding network in the hydrophobic core that radiates from the Cys21-Cys48 disulfide bond and encompasses residues Lys36, Val24, Cys21, and Cys17 and the majority of the long helix. The heterogeneity is attributed to population of the alternate S and R chiralities of the disulfide bond, each destabilized by steric interactions with the extended alpha-helix. Comparison of the chemical shifts and their temperature gradients reveals that the molecular structure of the protein with the less stable R disulfide resembles that of the Fd with a cleaved disulfide bond. Both cluster architecture (3Fe vs 4Fe) and ligand mutation (Cys for Asp14) leave the disulfide orientational heterogeneity largely unperturbed. It is concluded that the six- to seven-residue extension that results in a longer helix and larger beta-sheet in Pf Fd, relative to other hyperthermostable Fds, more likely serves to destabilize the disulfide bond, and hence make it more readily reducible, than to significantly increase protein thermostability.

The structure of iron-sulfur proteins

Ferredoxins are a group of iron-sulfur proteins for which a wealth of structural and mutational data have recently become available. Previously unknown structures of ferredoxins which are adapted to halophilic, acidophilic or hyperthermophilic environments and new cysteine patterns for cluster ligation and non-cysteine cluster ligation have been described. Site-directed mutagenesis experiments have given insight into factors that influence the geometry, stability, redox potential, electronic properties and electron-transfer reactivity of iron-sulfur clusters.

Determination of the structure of oxidised Desulfovibrio africanus ferredoxin I by 1H NMR spectroscopy and comparison of its solution structure with its crystal structure

The solution structure of the 64 amino acid Fe4S4 ferredoxin I from Desulfovibrio africanus has been determined using two-dimensional 1H NMR spectroscopy. Sequence-specific assignments were obtained for 59 amino acid residues and the structure determined with the program DIANA on the basis of 549 nuclear Overhauser enhancement (NOE) upper distance limits, and four dihedral angle and 52 distance constraints for the Fe4S4 cluster. The NMR structure was refined using the simulated annealing and energy minimisation protocols of the program X-PLOR to yield a final family of 19 structures selected on the basis of good covalent geometry and minimal restraint violations. The r.m.s.d. values to the average structure for this family are 0.49(+/-0.07) A and 0.94(+/-0.09) A for the backbone and heavy-atoms of residues 3 to 62, respectively. The NMR structure has been compared to the previously reported X-ray structures for the two molecules within the asymmetric unit of the crystal, which have a network of seven hydrogen bonds between them. This intermolecular interface, involving residues 38, 40 to 43 and 46, has the same conformation in the solution structures showing that the crystal packing does not perturb the structure. There are three regions in which the NMR and X-ray structures differ: around the cluster, a turn involving residues 8 to 10, and a loop involving residues 29 to 32. In the family of solution structures the backbone of the loop region incorporating residues 29 to 32 is well-defined whilst in both of the X-ray molecules it is ill-defined. The small differences between the X-ray and NMR structures for the cluster environment and the turn between residues 8 to 10 probably reflects a lack of NMR constraints. The observation of relatively rapid amide NH hydrogen exchange of NH groups close to the cluster, together with rapid flipping for Phe25, which is also close to the cluster, indicates that the cluster environment is more dynamic than the corresponding regions of related Fe/S proteins.

Topological chirality of iron-sulfur proteins

An examination of x-ray structures of single-cluster [4Fe-4S] proteins in the Protein Data Bank has revealed that all redox proteins and the glutamine 5-phosphoribosyl-l-pyrophosphate amidotransferase from Bacillus subtilis have a topological configuration arbitrarily designated as D, whereas the DNA repair enzyme endonuclease III from Escherichia coli has the opposite topological configuration L. This is the first example in which both senses of topological chirality have been observed in a class of proteins.

Homology modeling of adenylosuccinate synthetase from Saccharomyces cerevisiae reveals a possible binding region for single-stranded ARS sequences

Adenylosuccinate synthetase from Saccharomyces cerevisiae was investigated in order to find a structural explanation for its ability to bind specifically to single-stranded ARS elements (autonomously replicating sequences). Using the E. coli enzyme as template, a model for the structure of adenylosuccinate synthetase from S. cerevisiae was generated and subsequently refined by molecular dynamics techniques. The resulting three-dimensional structure offers an explanation for the DNA binding activity of the yeast enzyme by revealing a distinct basic region that is not present in the homologous enzymes from other organisms. The model is also in good agreement with biochemical data available for a mutant protein in which Glycine 252 is replaced by Aspartate. On the basis of the model a significant structural distortion near the catalytic center was predicted for this mutant, corresponding well to the enzymatic inactivity observed. The mutant enzyme shows larger structural fluctuations than the wild-type protein according to the results of two independent molecular dynamics simulations.