Ambiguity in bone tissue characteristics as presented in studies on dental implant planning and placement: a systematic review

Factors influencing speech improvement following maxillary complete-arch implant-supported restorations: A retrospective study

OBJECTIVE

This study explored factors affecting speech improvement in patients with an edentulous maxilla after the delivery of a complete-arch implant-supported fixed dental prosthesis (IFDP).

MATERIALS AND METHODS

Patients who had received IFDP for edentulous maxilla were enrolled, and various potential speech improvement-related factors were considered, including patient demographics, anterior residual bone volume, preoperative facial features, preoperative acoustic parameters, and adaptation time. Acoustic analysis and perceptual ratings were used to assess three fricatives [s], [f], and [ɕ]. Correlation and regression analyses were conducted to assess the association between changes in fricatives and potential factors (α = .05).

RESULTS

The study included 50 patients (18 females and 32 males, aged 50.62 ± 15.71 years, range 19-76). Significant correlations were found among the change in the center of gravity (ΔCoG) of [s] and anterior residual bone volume, zygomatic implants number and proportion (p < .05). These correlations were largely mirrored in the perceptual score (ΔPS) changes. After controlling for age, sex, preoperative acoustic parameters, and adaptation time, the ΔCoG and ΔPS of fricatives were mainly correlated with the anterior residual bone volume, preoperative acoustic parameters, and adaptation time.

CONCLUSION

Speech improvements post-IFDP delivery are mainly related to preoperative speech characteristics, anterior residual bone volume, and adaptation time. The residual bone volume's impact on consonants varies with specific articulatory gestures. This study provides insights into forecasting speech outcomes following IFDP restoration and provides recommendations and methods for data collection in developing future prediction models.

Jawbone quality classification in dental implant planning and placement studies. A scoping review

Aim

Cone beam computed tomography has become an attractive method for implant planning. However, in most cases, not all the information is taken advantage of and often the radiographic evaluation of bone quality is based on subjective assessment by the individual clinician. Therefore, the aim of this study was to examine classifications of bone tissue characteristics and methods for assessing them in dental implant planning and placement studies.

Materials and Methods

Three databases (Pubmed, Scopus, Web of Science) were searched using specific index terms: "Bone quality, bone quantity, bone density, cone-beam CT and cone-beam computed tomography". Three reviewers selected titles and analyzed abstracts according to inclusion and exclusion criteria. Some descriptions of bone tissue characteristics (bone quality, density, and quantity) used before or during dental implant placement were selected and categorized.

Results

The search yielded 442 titles. A total of 32 articles were selected and read in full text. Seventeen articles were considered relevant. Different classification systems were found to evaluate bone tissue characteristics as well as different examination protocols. Thirteen publications included in this review reported on bone quality and quantity using the Lekholm and Zarb classification. However, only four studies implemented and/or proposed modifications of the Lekholm and Zarb system. Four other publications described bone quality according to different classification systems such as Misch, University of California Los Angeles (UCLA), or Trisi and Rao. The assessment methods were often briefly described (or not described at all in one publication). Of the articles analyzed, five presented observer performance, whereas three presented diagnostic accuracy of the assessment method.

Conclusion

Currently, there are different classification systems applied to dental implant planning and placement, particularly regarding whether bone quality or quantity affects treatment outcomes. However, most authors have not validated the diagnostic accuracy and reproducibility of the classification used. Therefore, it is necessary to develop a classification system consistent with characteristics of bone tissue, taking into consideration an adequate description of bone tissue assessment methods, their diagnostic accuracy, and observer performance.

CBCT for Diagnostics, Treatment Planning and Monitoring of Sinus Floor Elevation Procedures

Sinus floor elevation (SFE) is a standard surgical technique used to compensate for alveolar bone resorption in the posterior maxilla. Such a surgical procedure requires radiographic imaging pre- and postoperatively for diagnosis, treatment planning, and outcome assessment. Cone beam computed tomography (CBCT) has become a well-established imaging modality in the dentomaxillofacial region. The following narrative review is aimed to provide clinicians with an overview of the role of three-dimensional (3D) CBCT imaging for diagnostics, treatment planning, and postoperative monitoring of SFE procedures. CBCT imaging prior to SFE provides surgeons with a more detailed view of the surgical site, allows for the detection of potential pathologies three-dimensionally, and helps to virtually plan the procedure more precisely while reducing patient morbidity. In addition, it serves as a useful follow-up tool for assessing sinus and bone graft changes. Meanwhile, using CBCT imaging has to be standardized and justified based on the recognized diagnostic imaging guidelines, taking into account both the technical and clinical considerations. Future studies are recommended to incorporate artificial intelligence-based solutions for automating and standardizing the diagnostic and decision-making process in the context of SFE procedures to further improve the standards of patient care.

Reliability of Using Texture Analysis of Periapical Radiographs Obtained Using Radiovisiography for Assessing Bone Quality in Dental Implant Planning: A Cross-Sectional Study

Background Pre-prosthetic implant radiographic imaging helps in the quantitative and qualitative analysis of the bone structure and also enables the evaluation of the relationship between critical structures and potential implant sites. Purpose The aim of the study was to define the reliability of utilizing the analysis of textures from the periapical radiographic images obtained through Radiovisiography (RVG) in order to better plan for dental implantations. Methods A cross-sectional study was conducted using 50 intraoral periapical radiographs which were obtained through RVG performed prior to the placement of implants. The radiographs were segregated based on anatomical locations i.e. 12 for the anterior maxilla, nine for the posterior maxilla, seven for the anterior mandible, and 22 for the posterior mandible. Each of the radiographs was visually assessed by four experienced examiners, namely a Prosthodontist E1, Periodontist E2, Oral surgeon E3, and Oral radiologist E4, which was then compared to an experienced operator's tactile perception during a pilot drill for implant placement. As a reference, the Lekholm and Zarb classification was provided to all the examiners for them to qualitatively assess the bone structure in the radiographs. Results The examiners' results were correlated with the assessment provided by the experienced operator. E1 and E4 successfully assessed 42% of the radiographs while E2 had the least success with only 26%. Of the 12 anterior maxillary radiographs, only eight were accurately assessed by E1. With respect to the posterior maxilla, all examiners correctly assessed four radiographs each. Of the seven anterior mandibular radiographs, except for E2, the rest correctly assessed three radiographs each. Of the 22 posterior mandibular radiographs, only nine were accurately assessed by E4. Conclusion Intraoral periapical radiographs obtained through RVG did not meet the desired parameters for assessing the bone quality during the planning stage for implants.

Effects of erythropoietin on osteoblast in the tooth extraction socket in mice periodontitis model

Periodontitis is an excessive inflammatory event in tooth-supporting tissues and can cause tooth loss. We used erythropoietin (EPO), which has been reported to play an important role in bone healing and modulation of angiogenesis, as a therapeutic agent in vivo and in vitro experimental models to analyze its effect on periodontitis. First, EPO was applied to in vitro MC3T3-E1 cells and human periodontal ligament fibroblast (hPDLF) cells to examine its function in altered cellular events and gene expression patterns. In vitro cultivation of MC3T3-E1 and hPDLF cells with 10 IU/ml EPO at 24 and 48 h showed an obvious increase in cell proliferation. Interestingly, EPO treatment altered the expression of osteogenesis-related molecules, including alkaline phosphatase (ALP), bone morphogenetic protein-2 (BMP-2), and osteocalcin (OC) in MC3T3-E1 cells but not in hPDLF cells. In particular, MC3T3-E1 cells showed increased expression of ALP, BMP-2, and OC on day 5, while hPDLF cells showed increased expression of BMP-2, and OC on day 14. Based on the in vitro examination, we evaluated the effect of EPO on bone formation using an experimentally-induced animal periodontitis model. After the induction of periodontitis in the maxillary left second M, 10 IU/ml of EPO was locally applied to the extraction tooth sockets. Histomorphological examination using Masson’s trichrome (MTC) staining showed facilitated bone formation in the EPO-treated groups after 14 days. Similarly, stronger positive reactions against vascular endothelial growth factor (VEGF), cluster of differentiation 31 (CD31), runt-related transcription factor 2 (RUNX2), and osteocalcin (OC) were detected in the EPO-treated group compared to the control. Meanwhile, myeloperoxidase, an inflammatory marker, was decreased in the EPO-treated group on days 1 and 5. Overall, EPO facilitates bone healing and regeneration through altered signaling regulation and modulation of inflammation in the osteoblast cell lineage and to a lesser extent in hPDLF cells.

Patients' Perception of Recovery after Dental Implant Placement

Background and Objectives: The success rates of surgical dental implant insertions are high. However, knowledge of patients’ recovery is still lacking. “Health-related quality of life” (HRQOL) questionnaires are gaining popularity in all fields of medicine. The present survey assessed the perception of recovery after the surgical placement of dental implants. Materials and Methods: Forty individuals (26 women and 14 men; mean age, 55 ± 12 years) filled a questionnaire evaluating patients’ perception of recovery for 7 consecutive days post-surgery. Confounding factors included age, gender, oral habits, smoking, bruxism, bone quality (tactile evaluation) and quantity, implant location, number of implants, implant type, length and diameter, one-stage vs. two-stage, and the need for bone grafting. Results: The most serious difficulties were found in swelling, which became minimal after 5 days, followed by eating everyday food, ability to enjoy everyday food, maximal pain and average pain (3 days); analgesics consumption (2.5 days); limitations in daily routine, mouth opening, and speech (2 days); swallowing and sleep (1.5 days); and, within 1 day, all other measures attained minimal levels. Gender, and implant location (anterior vs. posterior) were significant predictor variables exerting their different characteristic delayed recoveries. Conclusions: (1) Patients should expect, in general, recovery within 4 days after dental implant placement; (2) women will experience a delayed recovery, (3) implants placed in the intercanine area will result in postoperative eating difficulties for nearly one week, and (4) the number of implants placed during the same appointment has no effect on post treatment recovery.

Counterclockwise Drilling with Different Tapered Drills Condenses the Implant Bed-An Optical Coherence Tomography In Vitro Study

Background and Objectives: To evaluate the condensation and the microarchitecture of implant bed walls of sites prepared with counterclockwise drilling with tapered implant drills using optical coherence tomography. Materials and Methods: Four drill designs with different wall and tip angles were used. Polyurethane laminas resembling type IV bone microarchitecture were superimposed and clamped with a vice to simulate the coronal, middle, and apical aspects of the implant site. Twenty implant beds were prepared at 1200 rpm in clockwise (control) and counterclockwise (test) directions (N = 160). Optical coherence tomography (OCT) was used to evaluate the condensation and microarchitecture characteristics of the implant bed walls. The relative condensation was calculated using the Image J software Bone application. The microarchitecture was evaluated in reconstructed 3D volumes in XY, XZ, and YZ sections. Statistical analysis was performed using one-way ANOVA. Dunnet test was applied to determine differences between groups. Significance was set as p < 0.05. Results: Counterclockwise drilling (Test) condensed and changed the microarchitecture of the apical regions for all the implant beds in all of the groups when compared to clockwise drilling (control). The apical region of test groups showed the highest relative bone condensation (p = 0.026) when compared to controls. Conclusions: The direction of rotation (counterclockwise drilling) and not the design of tapered drills (tip and wall angles) is responsible for the condensation at the apical area observed in polyurethane blocks. The OCT method can be used for the evaluation of changes in density and microstructure of polyurethane blocks.

Texture analysis of cone beam computed tomography images reveals dental implant stability

The aim of this study was to characterize the alveolar bone of edentulous maxillary sites using texture analysis (TA) of cone beam computed tomography (CBCT) images and to correlate the results to the insertion torque, thus verifying whether TA is a predictive tool of final implant treatment. This study was conducted on patients who had received single implants in the maxilla (46 implants) 1year earlier and whose torque values were properly recorded. Three cross-sections of the sites were selected on CBCT scans. Two regions of interest (ROIs) corresponding to the implant bone site and peri-implant bone were also outlined, according to virtual planning. The CBCT scans were exported to MaZda software, where the two ROIs were delimited following the previously demarcated contours. Values for the co-occurrence matrix were calculated for TA. With regard to the insertion torque value, there was a direct correlation with the contrast of the peri-implant bone (P<0.001) and an inverse correlation with the entropy of the implant bone site (P=0.006). A greater contrast indicates a greater torque value for insertion of the implants, and there is a possible association with a lower entropy value of the implant-bone interface.

Clinical Performance of Short Expandable Dental Implants for Oral Rehabilitation in Highly Atrophic Alveolar Bone: 3-year Results of a Prospective Single-Center Cohort Study

Background and Objectives: Oral health-related quality of life (OHRQOL) is compromised during the post-implant healing period, especially when vertical augmentation is required. A long-term trial sought to evaluate a short dental implant system with an apically expandable macro-design. Materials and Methods: Over 4.5 years, patients with limited vertical alveolar bone were consecutively recruited into this prospective cohort study. Implant success rate, OHRQOL (Oral Health Impact Profile (OHIP)-14), implant stability, and crestal bone changes were evaluated. Results: Data from 30 patients (mean age: 64.6 years, range 44–83) were analyzed, which related to 104 implants (53 in the maxilla, 51 in the mandible). Over the mean follow-up (42.6 ± 16.4 months), the implant success rate was 94.7% in the mandible (two implants lost) and 83.6% in the maxilla (four implants lost; p = 0.096), and the prosthetic success rate was 100%. The median OHIP-14 scores improved from 23 (interquartile range (IQR) 9–25.5) to 2 (IQR 0–5; p < 0.001). The mean implant stability quotient (ISQ) was 71.2 ± 10.6 for primary stability and 73.7 ± 13.3 (p = 0.213) for secondary stability, without significant maxilla-versus-mandible differences (p ≥ 0.066). Compared to the baseline, median crestal bone changes after loading were 1.0 mm (IQR 0–1.3) and 1.0 mm (IQR 0.2–1.2) in the maxilla and mandible (p = 0.508), respectively, at the end of the first year, 1.1 mm (IQR 0–1.3) and 1.0 mm (IQR 0.1–1.2) (p = 0.382), respectively, at the end of the second year, and 1.2 mm (IQR 0–1.9) and 1.1 mm (IQR 0.1–1.2) (p = 0.304), respectively, at the end of the third year. Conclusions: In patients with limited vertical bone height, short implants with optimized macro-design constitute a reliable method for functional rehabilitation, avoiding extensive alveolar bone augmentation.

Image-based Bone Density Classification Using Fractal Dimensions and Histological Analysis of Implant Recipient Site

Background:

Success of dental implants is affected by the quality and density of the alveolar bone. These parameters are essential for implant stability and influence its load-bearing capacity. Their assessment is usually based on preoperative radiographs used as a tool prior to implant procedures.

Objective:

The aim of the study was to compare the bone density of surgically harvested bone specimens at implant recipient sites in the maxillary and mandibular posterior region using histological analysis to the radiographic bone density using fractal dimension for reliability and determining an image based classification of bone density prior surgery.

Methods:

Fifty implants were placed in the posterior region of male patients, (twenty five implants in the maxilla and twenty five in the mandible). The edentulous regions were presurgically assessed using Photo Stimulable Phosphor Plate (PSP) intra-oral radiographs and the fractal dimension box counting of region of interest was calculated at the implant recipient site. During surgery, bone core specimens were trephined, and bone densities and minerals parameters were evaluated based on histological analysis using SEM (Scanning Electron Microscopy), and atomic absorption spectrometry.

Results:

Fractal dimensions (FD) values for the same region of interest (ROI) selected on the radiographs of bone blocks and edentulous sites were different but showed a proportional variation in molar and premolar region of the maxilla and mandible. Bone density results, calculated by the ratio of bone mass (BM) to the bone volume (BV) of the bone core specimen (D=M/V), increased in the mandibular bone blocks, and decreased in the maxilla specimens. Moreover, fractal dimension values of preoperative radiographs at implant recipient sites and bone density of trephined showed a statistically similar distribution. However, no significant difference was shown in the percentage of minerals contents and mass of calcium phosphate of each bone specimen between maxilla and mandible based on scanning electron microscopy analysis. Four types of bone densities were classified according to the distribution of FD values based on preoperative radiographs and on the densities of bone cores calculations.

Conclusion:

Radiographic estimation of bone quality calculated with fractal dimension could be a useful, non-invasive tool when using preoperative intra-oral radiographs to predict bone density at implant recipient sites with caution and limits concerning the kind of digital radiographs and size of region of interest, especially when these results were based with bone specimens harvested from implant site as an absolute reference.

The evaluation of implant stability measured by resonance frequency analysis in different bone types

Objectives

Bone density seems to be an important factor affecting implant stability. The relationship between bone density and primary and secondary stability remains under debate. The aim of this study was to compare primary and secondary stability measured by resonance frequency analysis (RFA) between different bone types and to compare implant stability at different time points during 3 months of follow-up.

Materials and Methods

Our study included 65 implants (BioHorizons Implant Systems) with 3.8 or 4.6 mm diameter and 9 or 10.5 mm length in 59 patients. Bone quality was assessed by Lekholm-Zarb classification. After implant insertion, stability was measured by an Osstell device using RFA at three follow-up visits (immediately, 1 month, and 3 months after implant insertion). ANOVA test was used to compare primary and secondary stability between different bone types and between the three time points for each density type.

Results

There were 9 patients in type I, 18 patients in type II, 20 patients in type III, and 12 patients in type IV. Three implants failed, 1 in type I and 2 in type IV. Stability values decreased in the first month but increased during the following two months in all bone types. Statistical analysis showed no significant difference between RFA values of different bone types at each follow-up or between stability values of each bone type at different time points.

Conclusion

According to our results, implant stability was not affected by bone density. It is difficult to reach a certain conclusion about the effect of bone density on implant stability as stability is affected by numerous factors.

Relation between insertion torque and tactile, visual, and rescaled gray value measures of bone quality: a cross-sectional clinical study with short implants

Background

This study assessed the relationship between insertion torque and bone quality evaluated during surgery and in preoperative computed tomographic (CT) images analyzed either visually or by rescaled mean gray values (MGVs). The study also tested the correlation between the clinical and radiographic measures of bone quality.

Methods

The consecutive sample was composed of 45 short implants (4.1 × 6 mm) placed in the posterior region of 20 patients. Intra-surgical tactile bone quality, based on the classification of bone types by Lekholm and Zarb, and insertion torque were recorded during the implant placement. Visual bone quality and normalized MGV were assessed in standardized axial, coronal, and sagittal sections of preoperative CT images. Data were analyzed by ANOVA and Spearman correlation (alpha = 0.05).

Results

Insertion torque was associated with all assessment methods of bone quality (tactile, CT visual, MGV). A moderate correlation was found among all methods of bone quality, except for CT visual assessment and tactile evaluation. MGVs varied as a function of arch, dental region, insertion torque, and bone types.

Conclusions

The results suggest that bone quality measures affect primary stability as recorded by insertion torque, and the assessment methods are consistently related.

Computer-based automatic classification of trabecular bone pattern can assist radiographic bone quality assessment at dental implant site

OBJECTIVE:

To develop and validate an automated classification method that determines the trabecular bone pattern at implant site based on three-dimensional bone morphometric parameters derived from CBCT images.

METHODS:

25 human cadaver mandibles were scanned using CBCT clinical scanning protocol. Volumes-of-interest comprising only the trabecular bone of the posterior regions were selected and segmented for three-dimensional morphometric parameters calculation. Three experts rated all bone regions into one of the three trabecular pattern classes (sparse, intermediate and dense) to generate a reference classification. Morphometric parameters were used to automatically classify the trabecular pattern with linear discriminant analysis statistical model. The discriminatory power of each morphometric parameter for automatic classification was indicated and the accuracy compared to the reference classification. Repeated-measures analysis of variances were used to statistically compare morphometric indices between the three classes. Finally, the outcome of the automatic classification was evaluated against a subjective classification performed independently by four different observers.

RESULTS:

The overall correct classification was 83% for quantity-, 86% for structure-related parameters and 84% for the parameters combined. Cross-validation showed a 79% model prediction accuracy. Bone volume fraction (BV/TV) had the most discriminatory power in the automatic classification. Trabecular bone patterns could be distinguished based on most morphometric parameters, except for trabecular thickness (Tb.Th) and degree of anisotropy (DA). The interobserver agreement between the subjective observers was fair (0.25), while the test-retest agreement was moderate (0.46). In comparison with the reference standard, the overall agreement was moderate (0.44).

CONCLUSION:

Automatic classification performed better than subjective classification with a prediction model comprising structure- and quantity-related morphometric parameters.

ADVANCES IN KNOWLEDGE:

Computer-aided trabecular bone pattern assessment based on morphometric parameters could assist objectivity in clinical bone quality classification.

Insertion Torque of Variable-Thread Tapered Implants in the Posterior Maxilla: A Clinical Study

PURPOSE

Primary stability is a key factor for successful implant osseointegration, especially in poor bone quality and early/immediate loading. In the immediate loading protocol, insertion torque values (ITVs) have been suggested to be the most valid prognostic factor for osseointegration of maxillary implants. The objectives of this study were to: (1) evaluate ITVs achieved by a variable-thread tapered implant in the posterior maxilla; and (2) assess the impact of bone quality, implant dimensions, bicortical anchorage, and implant location on ITVs.

MATERIALS AND METHODS

Twenty-six adult, systemically healthy patients received 173 variable-thread tapered implants in maxillary premolar and molar healed edentulous sites with a minimum subsinus height of 8 mm. Implant sites were prepared using the bone-quality adjusted drilling sequence according to manufacturer's recommendations. Bone quality was recorded subjectively during drilling based on Misch criteria (D1-D4), and ITVs were measured with a manual torque wrench. Univariate and multivariate analyses were performed at the 0.05 significance level.

RESULTS

First and second molar sites accounted for 46.8% of all implants. D4 bone was encountered in 61.3% of the sites. Most of the implants were 4.3 mm in diameter (59.5%), and lengths of 11.5 and 13 mm were most commonly used (75.2%). Approximately half of the implants were associated with apical cortical anchorage (51.4%). The overall mean ITV was 44.5 ± 23.0 Ncm, with 65.5 ± 15.6 Ncm, 55.5 ± 19.6 Ncm, and 36.6 ± 21.7 Ncm for D2, D3, and D4 bone, respectively. Bone quality and implant location significantly affected ITVs, while implant dimensions and apical cortical anchorage did not.

CONCLUSIONS

ITVs of variable-thread implants were significantly influenced by variations in bone quality and implant position in the posterior maxilla. Despite the influence of bone quality on primary stability, the mean ITVs attained with variable-thread tapered implants in poor bone quality were within the recommended range for immediate loading.

Relationships among Bone Quality, Implant Osseointegration, and Wnt Signaling

A variety of clinical classification schemes have been proposed as a means to identify sites in the oral cavity where implant osseointegration is likely to be successful. Most schemes are based on structural characteristics of the bone, for example, the relative proportion of densely compact, homogenous (type I) bone versus more trabeculated, cancellous (type III) bone. None of these schemes, however, consider potential biological characteristics of the bone. Here, we employed multiscale analyses to identify and characterize type I and type III bones in murine jaws. We then combined these analytical tools with in vivo models of osteotomy healing and implant osseointegration to determine if one type of bone healed faster and supported osseointegration better than another. Collectively, these studies revealed a strong positive correlation between bone remodeling rates, mitotic activity, and osteotomy site healing in type III bone and high endogenous Wnt signaling. This positive correlation was strengthened by observations showing that the osteoid matrix that is responsible for implant osseointegration originates from Wnt-responsive cells and their progeny. The potential application of this knowledge to clinical practice is discussed, along with a theory unifying the role that biology and mechanics play in implant osseointegration.

Intraoral radiographs texture analysis for dental implant planning

BACKGROUND AND OBJECTIVES

Computer vision extracts features or attributes from images improving diagnosis accuracy and aiding in clinical decisions. This study aims to investigate the feasibility of using texture analysis of periapical radiograph images as a tool for dental implant treatment planning.

METHODS

Periapical radiograph images of 127 jawbone sites were obtained before and after implant placement. From the superimposition of the pre- and post-implant images, four regions of interest (ROI) were delineated on the pre-implant images for each implant site: mesial, distal and apical peri-implant areas and a central area. Each ROI was analysed using Matlab® software and seven image attributes were extracted: mean grey level (MGL), standard deviation of grey levels (SDGL), coefficient of variation (CV), entropy (En), contrast, correlation (Cor) and angular second moment (ASM). Images were grouped by bone types-Lekholm and Zarb classification (1,2,3,4). Peak insertion torque (PIT) and resonance frequency analysis (RFA) were recorded during implant placement. Differences among groups were tested for each image attribute. Agreement between measurements of the peri-implant ROIs and overall ROI (peri-implant + central area) was tested, as well as the association between primary stability measures (PIT and RFA) and texture attributes.

RESULTS

Differences among bone type groups were found for MGL (p = 0.035), SDGL (p = 0.024), CV (p < 0.001) and En (p < 0.001). The apical ROI showed a significant difference from the other regions for all attributes, except Cor. Concordance correlation coefficients were all almost perfect (ρ > 0.93), except for ASM (ρ = 0.62). Texture attributes were significantly associated with the implant stability measures.

CONCLUSION

Texture analysis of periapical radiographs may be a reliable non-invasive quantitative method for the assessment of jawbone and prediction of implant stability, with potential clinical applications.

Correlation of radiographic analysis during initial planning and tactile perception during the placement of implants

Most of the decisions made in planning treatment with implants rely on the clinician's assessment of the density of the jawbone. However, we know of only a few studies that have evaluated the clinicians' subjectivity and the objective quantitative methods. Our aim was to assess whether the characteristics of the bone seen on preoperative imaging are similar to the features faced during the operation. We collected data about 32 implant procedures done during the Specialisation Course for Implant Dentistry, Universidade de Ribeirão Preto, San Paulo. First, the clinicians evaluated the panoramic radiograph and computed tomographic scans preoperatively, classified the bone density according to the Lekholm and Zarb classification, and marked their subjective evaluation on a visual analogue scale. Postoperatively the surgeons filled out a questionnaire based on their subjective perceptions obtained during the insertion of the implants. Another examiner answered the same questionnaire after looking at the patient's images but without knowing the surgeon's results. There was a good correlation between the surgeons' preoperative classification of the type of bone and their tactile perception (p=0.000), and a good correlation between the surgeon's preoperative classification of the bone and the examiner's findings (p=0.000). We conclude that imaging is an important part of preoperative planning and can predict the quality of the bone when coupled with the opinion of a trained clinician, objective analysis, and standard classification of the bone.

CBCT-based bone quality assessment: are Hounsfield units applicable?

CBCT is a widely applied imaging modality in dentistry. It enables the visualization of high-contrast structures of the oral region (bone, teeth, air cavities) at a high resolution. CBCT is now commonly used for the assessment of bone quality, primarily for pre-operative implant planning. Traditionally, bone quality parameters and classifications were primarily based on bone density, which could be estimated through the use of Hounsfield units derived from multidetector CT (MDCT) data sets. However, there are crucial differences between MDCT and CBCT, which complicates the use of quantitative gray values (GVs) for the latter. From experimental as well as clinical research, it can be seen that great variability of GVs can exist on CBCT images owing to various reasons that are inherently associated with this technique (i.e. the limited field size, relatively high amount of scattered radiation and limitations of currently applied reconstruction algorithms). Although attempts have been made to correct for GV variability, it can be postulated that the quantitative use of GVs in CBCT should be generally avoided at this time. In addition, recent research and clinical findings have shifted the paradigm of bone quality from a density-based analysis to a structural evaluation of the bone. The ever-improving image quality of CBCT allows it to display trabecular bone patterns, indicating that it may be possible to apply structural analysis methods that are commonly used in micro-CT and histology.

The Influence of Tactile Perception on Classification of Bone Tissue at Dental Implant Insertion

BACKGROUND

Various ways of using the Lekholm and Zarb (L&Z) classification have added to the lack of scientific evidence of the effectiveness of this clinical method in the evaluation of implant treatment.

PURPOSE

The study aims to assess subjective jawbone classifications in patients referred for implant treatment, using L&Z classification with and without surgeon's hand perception at implant insertion. The association between bone type classifications and quantitative parameters of primary implant stability was also assessed.

MATERIALS AND METHODS

One hundred thirty-five implants were inserted using conventional loading protocol. Three surgeons classified bone quality at implant sites using two methods: one based on periapical and panoramic images (modified L&Z) and one based on the same images associated with the surgeon's tactile perception during drilling (original L&Z). Peak insertion torque and implant stability quotient (ISQ) were recorded.

RESULTS

The modified and original L&Z were strongly correlated (rho = 0.79; p < .001); Wilcoxon signed-rank test showed no significant difference in the distribution of bone type classification between pairs using the two methods (p = .538). Spearman correlation tested the association between primary stability parameters and bone type classifications (-0.34 to -0.57 [p < .001]).

CONCLUSIONS

Tactile surgical perception has a minor influence on rating of subjective bone type for dental implant treatment using the L&Z classification.

Standardized method to quantify the variation in voxel value distribution in patient-simulated CBCT data sets

OBJECTIVES

To suggest a standardized method to assess the variation in voxel value distribution in patient-simulated CBCT data sets and the effect of time between exposures (TBE). Additionally, a measurement of reproducibility, Aarhus measurement of reproducibility (AMORe), is introduced, which could be used for quality assurance purposes.

METHODS

Six CBCT units were tested [Cranex(®) 3D/CRAN (Soredex Oy, Tuusula, Finland); Scanora(®) 3D/SCAN (Soredex Oy); NewTom™ 5G/NEW5 (QR srl, Verona, Italy); i-CAT/ICAT (Imaging Sciences International, Hatfield, PA); 3D Accuitomo FPD80/ACCU (Morita, Kyoto, Japan); and NewTom VG/NEWV (QR srl)]. Two sets of volumetric data of a wax-imbedded dry human skull (containing a titanium implant) were acquired by each CBCT unit at two sessions on separate days. Each session consisted 21 exposures: 1 "initial" followed by a 30-min interval (initial data set), 10 acquired with 30-min TBE (data sets 1-10) and 10 acquired with 15-min TBE (data sets 11-20). CBCT data were exported as digital imaging and communications in medicine files and converted to text files containing x, y and z positions and grey shade for each voxel. Subtractions were performed voxel-by-voxel in two set-ups: (1) between two consecutive data sets and (2) between any subsequent data set and data set 1. The mean grey shade variation for each voxel was calculated for each unit/session.

RESULTS

The largest mean grey shade variation was found in the subtraction set-up 2 (27-447 shades of grey, depending on the unit). Considering subtraction set-up 1, the highest variation was seen for NEW5, between data sets 1 and the initial.

CONCLUSIONS

Discrepancies in voxel value distribution were found by comparing the initial examination of the day with the subsequent examinations. TBE had no predictable effect on the variation of CBCT-derived voxel values. AMORe ranged between 0 and 64.

Treatment planning the endodontic-implant interface

One of the most challenging treatment planning decisions in restorative dentistry is the retention of a root filled tooth or its extraction and replacement with an implant. Making an informed judgement relies upon not only clinical experience and expertise but also interpretation of the published clinical evidence. In the last few years, more robust data and closer scrutiny of the evidence has helped to understand the advantages and disadvantages of each of these treatment modalities. The purpose of this paper is to provide a narrative review of some of the factors that may influence treatment planning for root canal treated teeth and indications for whether these teeth would be better replaced by an implant. From the evidence presented it is clear that both treatments have a place in contemporary restorative dental treatment and that survival for both root filled teeth and implants are similar. Unsurprisingly, both these treatment choices require high standards of clinical expertise and careful planning to ensure the best outcome.

Segmentation of Trabecular Jaw Bone on Cone Beam CT Datasets

BACKGROUND

The term bone quality is often used in a dentomaxillofacial context, for example in implant planning, as bone density and bone structure have been linked to primary implant success.

PURPOSE

This research aimed to investigate the performance of adaptive thresholding of trabecular bone in cone beam CT (CBCT) images. The segmentation quality was assessed for different imaging devices and upper and lower jaws.

MATERIALS AND METHODS

Four jaws were scanned with eight CBCT scanners and one micro-CT device. Images of the jaws were spatially aligned with the micro-CT images. Two volumes of interest for each jaw were manually delineated. Trabecular bone in the volumes of interest in the micro-CT images was segmented so that the micro-CT images could serve as high-resolution ground truth images. The volumes of interest in the CBCT images were segmented using both global and adaptive thresholding.

RESULTS

Segmentation was significantly better for the lower jaw than for the upper jaw. Differences in performance between the scanners were significant for both jaws. Adaptive thresholding performed significantly better in segmenting the bone structure out of CBCT images.

CONCLUSIONS

When assessing jaw bone structure, the observer should always choose adaptive thresholding. It remains a challenge to identify the optimal threshold selection for the structural assessment of jaw bone.

Clinical and radiological classification of the jawbone anatomy in endosseous dental implant treatment

Objectives

The purpose of present article was to review the classifications suggested for assessment of the jawbone anatomy, to evaluate the diagnostic possibilities of mandibular canal identification and risk of inferior alveolar nerve injury, aesthetic considerations in aesthetic zone, as well as to suggest new classification system of the jawbone anatomy in endosseous dental implant treatment.

Material and Methods

Literature was selected through a search of PubMed, Embase and Cochrane electronic databases. The keywords used for search were mandible; mandibular canal; alveolar nerve, inferior; anatomy, cross-sectional; dental implants; classification. The search was restricted to English language articles, published from 1972 to March 2013. Additionally, a manual search in the major anatomy and oral surgery books were performed. The publications there selected by including clinical and human anatomy studies.

Results

In total 109 literature sources were obtained and reviewed. The classifications suggested for assessment of the jawbone anatomy, diagnostic possibilities of mandibular canal identification and risk of inferior alveolar nerve injury, aesthetic considerations in aesthetic zone were discussed. New classification system of the jawbone anatomy in endosseous dental implant treatment based on anatomical and radiologic findings and literature review results was suggested.

Conclusions

The classification system proposed here based on anatomical and radiological jawbone quantity and quality evaluation is a helpful tool for planning of treatment strategy and collaboration among specialists. Further clinical studies should be conducted for new classification validation and reliability evaluation.

Diagnostic imaging of trabecular bone microstructure for oral implants: a literature review

Several dental implant studies have reported that radiographic evaluation of bone quality can aid in reducing implant failure. Bone quality is assessed in terms of its quantity, density, trabecular characteristics and cells. Current imaging modalities vary widely in their efficiency in assessing trabecular structures, especially in a clinical setting. Most are very costly, require an extensive scanning procedure coupled with a high radiation dose and are only partially suitable for patient use. This review examines the current literature regarding diagnostic imaging assessment of trabecular microstructure prior to oral implant placement and suggests cone beam CT as a method of choice for evaluating trabecular bone microstructure.

Microstructural Observation with MicroCT and Histological Analysis of Human Alveolar Bone Biopsy from a Planned Implant Site: A Case Report

The subject was a 53-year-old male. An alveolar bone sample was obtained from the site of the lower left first molar, before dental implant placement. Although the details of the trabecular structure were not visible with conventional computed tomography, micro-computed tomography (microCT) three-dimensional images of the alveolar bone biopsy sample showed several plate-like trabeculae extending from the lingual cortical bone. Histological observations of the bone sample revealed trabeculae, cuboidal osteoblasts, osteoclasts and hematopoietic cells existing in the bone tissue at the implantation site. Bone metabolic markers and calcaneal bone density were all within normal ranges, indicating no acceleration of the patient’s bone metabolism.

Using microCT, and histological and histomorphometrical techniques, a great deal of valuable information about the bone tissue was obtained from a biopsy sample extracted from the patient’s planned implant site.

Variability of dental cone beam CT grey values for density estimations

OBJECTIVE

The aim of this study was to investigate the use of dental cone beam CT (CBCT) grey values for density estimations by calculating the correlation with multislice CT (MSCT) values and the grey value error after recalibration.

METHODS

A polymethyl methacrylate (PMMA) phantom was developed containing inserts of different density: air, PMMA, hydroxyapatite (HA) 50 mg cm(-3), HA 100, HA 200 and aluminium. The phantom was scanned on 13 CBCT devices and 1 MSCT device. Correlation between CBCT grey values and CT numbers was calculated, and the average error of the CBCT values was estimated in the medium-density range after recalibration.

RESULTS

Pearson correlation coefficients ranged between 0.7014 and 0.9996 in the full-density range and between 0.5620 and 0.9991 in the medium-density range. The average error of CBCT voxel values in the medium-density range was between 35 and 1562.

CONCLUSION

Even though most CBCT devices showed a good overall correlation with CT numbers, large errors can be seen when using the grey values in a quantitative way. Although it could be possible to obtain pseudo-Hounsfield units from certain CBCTs, alternative methods of assessing bone tissue should be further investigated.

ADVANCES IN KNOWLEDGE

The suitability of dental CBCT for density estimations was assessed, involving a large number of devices and protocols. The possibility for grey value calibration was thoroughly investigated.

Bone quality and quantity of the anterior maxillary trabecular bone in dental implant sites

OBJECTIVES

The aim of this study was to investigate the characteristics of implant sites on the edentulous alveolar ridge in the anterior maxilla. We studied the bone quantity and quality of implant sites at the anterior maxilla using CT images for the 33 implant sites on patients who underwent dental implant therapy in our Department since 2006.

MATERIALS AND METHODS

Computed tomography (CT) images of 33 patients (20 women: 13 men) encompassing 33 implant sites were chosen and examined. The recipient sites for implant placement were determined based on CT data using an implant planning software (Simplant 11.0). The mean bone density values in Hounsfield unit (HU) were recorded using Simplant for both the simulated implant areas and the trabecular bone width. We classified the edentulous alveolar ridge and bone quality according to a classification based on Lekholm and Zarb (1985).

RESULTS

Incisors had higher bone densities than canines. Women had lower bone densities than men. Canines displayed greater trabecular bone density and alveolar bone widths than incisors. No maxillary sites were judged to have a bone quality of 1 in this group. Quality 3 accounted for 69.7% of the total samples.

CONCLUSIONS

An assessment of bone quality in the anterior alveolar ridge may well reflect age-related systemic pathological conditions and should be used in dental implant treatment planning to avoid associated risk factors.

Histomorphometrical and molecular evaluation of endosseous dental implants sites in humans: correlation with clinical and radiographic aspects

OBJECTIVE

To evaluate the correlations between clinical-radiographical aspects and histomorphometric-molecular parameters of endosseous dental implant sites in humans.

MATERIAL AND METHODS

The study sample consisted of bone implant sites from the jawbones of 32 volunteers, which were classified according to two different systems: (1) based only on periapical and panoramic images (PP); (2) as proposed by Lekholm & Zarb (L&Z). Bone biopsies were removed using trephine during the first drilling for implant placement. Samples were stained with haematoxylin-eosin (HE), and histomorphometric analysis was performed to obtain the following parameters: trabecular thickness (Tb.Th), trabecular number, bone volume density (BV/TV), bone specific surface (BS/BV), bone surface density and trabecular separation (Tb.Sp). In addition, immunohistochemistry analysis was performed on bone tissue samples for the proteins, Receptor activator of nuclear factor kappa-B (RANK), RANK ligand (RANKL), osteoprotegerin (OPG) and Osteocalcin (OC). Also, the determination of the relative levels of gene expression was performed using Reverse transcription-real-time Polymerase Chain Reaction (RT-PCR).

RESULTS

PP and L&Z classification systems revealed a moderate correlation with BV/TV, BS/BV, Tb.Th and Tb.Sp. L&Z's system identified differences among bone types when BV/TV, BS/BV, Tb.Th and Tb.Sp were compared. A weak correlation between PP/L&Z classifications and the expression of bone metabolism regulators (RANK, RANKL, OPG e OC) was found. The analysis of mRNA expression showed no difference between the bone types evaluated.

CONCLUSIONS

Our results suggest that PP and L&Z subjective bone-type classification systems are related to histomorphometric aspects. These data may contribute to the validation of these classifications. Bone remodelling regulatory molecules do not seem to influence morphological aspects of the jawbone .