Arterial wall adaptation under elevated longitudinal stretch in organ culture

Novel tubing connectors reduce ECMO circuit thrombosis

BACKGROUND

Thrombosis within extracorporeal membrane oxygenation (ECMO) circuits is a common complication that dominates clinical management of patients receiving mechanical circulatory support. Prior studies have identified that over 80% of circuit thrombosis can be attributed to tubing-connector junctions.

METHODS

A novel connector was designed that reduces local regions of flow stagnation at the tubing-connector junction to eliminate a primary source of ECMO circuit thrombi. To compare clotting between the novel connectors and the traditional connectors, both in vitro loops and an in vivo caprine model of long-term (48 h) ECMO were used to generate tubing-connector junction clots.

RESULTS

In vitro, the traditional connectors uniformly (9/9) formed large thrombi, while novel connectors formed a small thrombus in only one of nine (p < 0.0001). In the long-term goat ECMO circuits, the traditional connectors exhibited more thrombi (p < 0.04), and these thrombi were more likely to protrude into the lumen of the tubing (p < 0.001).

CONCLUSION

Both in vitro and in vivo validation experiments successfully recreated circuit thrombosis and demonstrate that the adoption of novel connectors can reduce the burden of circuit thrombosis.

An Investigation of the Constructional Design Components Affecting the Mechanical Response and Cellular Activity of Electrospun Vascular Grafts

Cardiovascular disease is anticipated to remain the leading cause of death globally. Due to the current problems connected with using autologous arteries for bypass surgery, researchers are developing tissue-engineered vascular grafts (TEVGs). The major goal of vascular tissue engineering is to construct prostheses that closely resemble native blood vessels in terms of morphological, mechanical, and biological features so that these scaffolds can satisfy the functional requirements of the native tissue. In this setting, morphology and cellular investigation are usually prioritized, while mechanical qualities are generally addressed superficially. However, producing grafts with good mechanical properties similar to native vessels is crucial for enhancing the clinical performance of vascular grafts, exposing physiological forces, and preventing graft failure caused by intimal hyperplasia, thrombosis, aneurysm, blood leakage, and occlusion. The scaffold's design and composition play a significant role in determining its mechanical characteristics, including suturability, compliance, tensile strength, burst pressure, and blood permeability. Electrospun prostheses offer various models that can be customized to resemble the extracellular matrix. This review aims to provide a comprehensive and comparative review of recent studies on the mechanical properties of fibrous vascular grafts, emphasizing the influence of structural parameters on mechanical behavior. Additionally, this review provides an overview of permeability and cell growth in electrospun membranes for vascular grafts. This work intends to shed light on the design parameters required to maintain the mechanical stability of vascular grafts placed in the body to produce a temporary backbone and to be biodegraded when necessary, allowing an autologous vessel to take its place.

Numerical simulations of the nonsymmetric growth and remodeling of arteries under axial twisting

Blood vessels are often subjected to axial twisting during body movement or surgery. Sustained twisting may lead to blood vessel growth and remodeling, however, it remains unclear how the extracellular matrix in the blood vessels remodel under sustained axial twisting. This study aimed to develop a computational model to simulate stress-induced growth and remodeling (G&R) of thin-walled blood vessels under axial twisting. Cylindrical vessels were subjected to a step increase in axial torque while the axial stretch and lumen pressure remained constant. The vessel walls were modeled based on the constrained mixture theory given as microstructure-based discrete fiber families with isotropic matrix structure models. Simulation results demonstrated that in response to a constant twist angle loading, arterial wall thickness, mass, and twisting torque gradually increase towards a new steady state. However, the stress and mass decrease in one diagonal fiber family while increasing in the other diagonal fiber family before reaching plateaus. A novel finding was that the two helical collagen fiber families showed different growth rates and patterns during remodeling, driven by the different fiber stresses generated by the twisting, and led to non-symmetric material properties. This study sheds new light on arterial wall remodeling under axial twisting.

A collagen I derived matricryptin increases aorta vascular wall remodeling after induced thrombosis in mouse

Matricryptins are collagen fragments proteolytically released from the extracellular matrix (ECM) with biological activity that can regulate several processes involved in ECM remodeling. Vessel wall matrix reorganization after lesion is important to the recovery of vascular function. This study aimed to analyze the effect of the peptide p1158/59 (Lindsey, 2015) on thrombosis, neointimal formation, and vascular remodeling of C57BL6 mice abdominal aorta. We used a FeCl₃ induced vascular injury mice model and analyzed thrombus size, neointima formation, gelatinase activities in situ, re-endothelization, and collagen fibers organization on the arterial wall using polarization microscopy. As result, we observed that 2 days after injury the treatment with p1158/59 increased thrombus size and gelatinase activity, vascular lesion and it did not recover the endothelium loss induced by the chemical injury. We also observed that the peptide increased neointima growth and collagen birefringence, indicating collagen fibers reorganization. It also promoted increased re-endothelization and decreased activity of gelatinases 14 days after injury. Thus, we conclude that the peptide p1158/59 impaired the initial thrombosis recovery 2 days after injury but was able to induce vascular ECM remodeling after 14 days, improving vessel re-endothelization, collagen fibers deposition, and organization.

Thrombogenicity of biomaterials depends on hemodynamic shear rate

BACKGROUND

While it is well recognized that different biomaterials induce thrombosis at low shear rates, the effect of high shear rates may be quite different. We hypothesize that the amount of thrombus formation on a given material can be greatly influenced by the local shear rate.

METHODS

We tested this hypothesis with two different whole blood perfusion loop assays to quantify biomaterial thrombogenicity as a function of shear stress. One assay uses obstructive posts (pins) of material positioned centrally in a tube perfused at high shear rate of >5000/s for 24 h. A second assay uses a parallel plate chamber to perfuse low (<150/s), medium (~500/s), and high shear rates over 96 h. We evaluated the thrombogenicity of seven different biomaterials including stainless steel, acrylic, ceramic, Dacron, polytetrafluoroethylene (PTFE), silicone, and polyvinyl chloride (PVC).

RESULTS

For the pin assay, thrombus mass was significantly greater for stainless steel than either zirconia ceramic or acrylic (p < 0.001). Similarly, the parallel plate chamber at high shear showed that steel and PTFE (p < 0.02) occluded the chamber faster than acrylic. In contrast, a low shear parallel plate chamber revealed that stainless steel and PTFE were least thrombogenic, while silicone, Dacron, and other plastics such as acrylic were most thrombogenic. Histology revealed that high shear thrombi had a large proportion of platelets not seen in the low shear fibrin-rich thrombi.

CONCLUSION

This differential thrombogenicity based on shear rate conditions may be important in the selection of biomaterials for blood-contacting devices.

Cardiovascular Responses to Muscle Stretching: A Systematic Review and Meta-analysis

The aim of this study will be to review the current body of literature to understand the effects of stretching on the responses of the cardiovascular system. A literature search was performed using the following databases: Scopus, NLM Pubmed and ScienceDirect. Studies regarding the effects of stretching on responses of the cardiovascular system were investigated. Outcomes regarded heart rate(HR), blood pressure, pulse wave velocity (PWV of which baPWV for brachial-ankle and cfPWV for carotid-femoral waveforms), heart rate variability and endothelial vascular function. Subsequently, the effects of each outcome were quantitatively synthetized using meta-analytic synthesis with random-effect models. A total of 16 studies were considered eligible and included in the quantitative synthesis. Groups were also stratified according to cross-sectional or longitudinal stretching interventions. Quality assessment through the NHLBI tools observed a "fair-to-good" quality of the studies. The meta-analytic synthesis showed a significant effect of d=0.38 concerning HR, d=2.04 regarding baPWV and d=0.46 for cfPWV. Stretching significantly reduces arterial stiffness and HR. The qualitative description of the studies was also supported by the meta-analytic synthesis. No adverse effects were reported, after stretching, in patients affected by cardiovascular disease on blood pressure. There is a lack of studies regarding vascular adaptations to stretching.

Biomechanics and Mechanobiology of Saphenous Vein Grafts

Within several weeks of use as coronary artery bypass grafts (CABG), saphenous veins (SV) exhibit significant intimal hyperplasia (IH). IH predisposes vessels to thrombosis and atherosclerosis, the two major modes of vein graft failure. The fact that SV do not develop significant IH in their native venous environment coupled with the rapidity with which they develop IH following grafting into the arterial circulation suggests that factors associated with the isolation and preparation of SV and/or differences between the venous and arterial environments contribute to disease progression. There is strong evidence suggesting that mechanical trauma associated with traditional techniques of SV preparation can significantly damage the vessel and might potentially reduce graft patency though modern surgical techniques reduces these injuries. In contrast, it seems possible that modern surgical technique, specifically endoscopic vein harvest, might introduce other mechanical trauma that could subtly injure the vein and perhaps contribute to the reduced patency observed in veins harvested using endoscopic techniques. Aspects of the arterial mechanical environment influence remodeling of SV grafted into the arterial circulation. Increased pressure likely leads to thickening of the medial wall but its role in IH is less clear. Changes in fluid flow, including increased average wall shear stress, may reduce IH while disturbed flow likely increase IH. Nonmechanical stimuli, such as exposure to arterial levels of oxygen, may also have a significant but not widely recognized role in IH. Several potentially promising approaches to alter the mechanical environment to improve graft patency are including extravascular supports or altered graft geometries are covered.

Fluid-structure interaction modeling of aneurysmal arteries under steady-state and pulsatile blood flow: a stability analysis

Tortuous aneurysmal arteries are often associated with a higher risk of rupture but the mechanism remains unclear. The goal of this study was to analyze the buckling and post-buckling behaviors of aneurysmal arteries under pulsatile flow. To accomplish this goal, we analyzed the buckling behavior of model carotid and abdominal aorta with aneurysms by utilizing fluid-structure interaction (FSI) method with realistic waveforms boundary conditions. FSI simulations were done under steady-state and pulsatile flow for normal (1.5) and reduced (1.3) axial stretch ratios to investigate the influence of aneurysm, pulsatile lumen pressure and axial tension on stability. Our results indicated that aneurysmal artery buckled at the critical buckling pressure and its deflection nonlinearly increased with increasing lumen pressure. Buckling elevates the peak stress (up to 118%). The maximum aneurysm wall stress at pulsatile FSI flow was (29%) higher than under static pressure at the peak lumen pressure of 130 mmHg. Buckling results show an increase in lumen shear stress at the inner side of the maximum deflection. Vortex flow was dramatically enlarged with increasing lumen pressure and artery diameter. Aneurysmal arteries are more susceptible than normal arteries to mechanical instability which causes high stresses in the aneurysm wall that could lead to aneurysm rupture.

Arterial wall remodeling under sustained axial twisting in rats

Blood vessels often experience torsion along their axes and it is essential to understand their biological responses and wall remodeling under torsion. To this end, a rat model was developed to investigate the arterial wall remodeling under sustained axial twisting in vivo. Rat carotid arteries were twisted at 180° along the longitudinal axis through a surgical procedure and maintained for different durations up to 4weeks. The wall remodeling in these twisted arteries was examined using histology, immunohistochemistry and fluorescent microscopy. Our data showed that arteries remodeled under twisting in a time-dependent manner during the 4weeks post-surgery. Cell proliferation, MMP-2 and MMP-9 expressions, medial wall thickness and lumen diameter increased while collagen to elastin ratio decreased. The size and number of internal elastic lamina fenestrae increased with elongated shapes, while the endothelial cells elongated and aligned towards the blood flow direction gradually. These results demonstrated that sustained axial twisting results in artery remodeling in vivo. The rat carotid artery twisting model is an effective in vivo model for studying arterial wall remodeling under long-term torsion. These results enrich our understanding of vascular biology and arterial wall remodeling under mechanical stresses.

A Robust Method to Generate Mechanically Anisotropic Vascular Smooth Muscle Cell Sheets for Vascular Tissue Engineering

In arterial tissue engineering, mimicking native structure and mechanical properties is essential because compliance mismatch can lead to graft failure and further disease. With bottom-up tissue engineering approaches, designing tissue components with proper microscale mechanical properties is crucial to achieve the necessary macroscale properties in the final implant. This study develops a thermoresponsive cell culture platform for growing aligned vascular smooth muscle cell (VSMC) sheets by photografting N-isopropylacrylamide (NIPAAm) onto micropatterned poly(dimethysiloxane) (PDMS). The grafting process is experimentally and computationally optimized to produce PNIPAAm-PDMS substrates optimal for VSMC attachment. To allow long-term VSMC sheet culture and increase the rate of VSMC sheet formation, PNIPAAm-PDMS surfaces were further modified with 3-aminopropyltriethoxysilane yielding a robust, thermoresponsive cell culture platform for culturing VSMC sheets. VSMC cell sheets cultured on patterned thermoresponsive substrates exhibit cellular and collagen alignment in the direction of the micropattern. Mechanical characterization of patterned, single-layer VSMC sheets reveals increased stiffness in the aligned direction compared to the perpendicular direction whereas nonpatterned cell sheets exhibit no directional dependence. Structural and mechanical anisotropy of aligned, single-layer VSMC sheets makes this platform an attractive microstructural building block for engineering a vascular graft to match the in vivo mechanical properties of native arterial tissue.

Artery buckling stimulates cell proliferation and NF-κB signaling

Tortuous carotid arteries are often seen in aged populations and are associated with atherosclerosis, but the underlying mechanisms to explain this preference are unclear. Artery buckling has been suggested as one potential mechanism for the development of tortuous arteries. The objective of this study, accordingly, was to determine the effect of buckling on cell proliferation and associated NF-κB activation in arteries. We developed a technique to generate buckling in porcine carotid arteries using long artery segments in organ culture without changing the pressure, flow rate, and axial stretch ratio. Using this technique, we examined the effect of buckling on arterial wall remodeling in 4-day organ culture under normal and hypertensive pressures. Cell proliferation, NF-κB p65, IκB-α, ERK1/2, and caspase-3 were detected using immunohistochemistry staining and immunoblot analysis. Our results showed that cell proliferation was elevated 5.8-fold in the buckling group under hypertensive pressure (n = 7, P < 0.01) with higher levels of NF-κB nuclear translocation and IκB-α degradation (P < 0.05 for both). Greater numbers of proliferating cells were observed on the inner curve side of the buckled arteries compared with the outer curve side (P < 0.01). NF-κB colocalized with proliferative nuclei. Computational simulations using a fluid-structure interaction model showed reduced wall stress on the inner side of buckled arteries and elevated wall stress on the outer side. We conclude that arterial buckling promotes site-specific wall remodeling with increased cell proliferation and NF-κB activation. These findings shed light on the biomechanical and molecular mechanisms of the pathogenesis of atherosclerosis in tortuous arteries.

Stability of carotid artery under steady-state and pulsatile blood flow: a fluid-structure interaction study

It has been shown that arteries may buckle into tortuous shapes under lumen pressure, which in turn could alter blood flow. However, the mechanisms of artery instability under pulsatile flow have not been fully understood. The objective of this study was to simulate the buckling and post-buckling behaviors of the carotid artery under pulsatile flow using a fully coupled fluid-structure interaction (FSI) method. The artery wall was modeled as a nonlinear material with a two-fiber strain-energy function. FSI simulations were performed under steady-state flow and pulsatile flow conditions with a prescribed flow velocity profile at the inlet and different pressures at the outlet to determine the critical buckling pressure. Simulations were performed for normal (160 ml/min) and high (350 ml/min) flow rates and normal (1.5) and reduced (1.3) axial stretch ratios to determine the effects of flow rate and axial tension on stability. The results showed that an artery buckled when the lumen pressure exceeded a critical value. The critical mean buckling pressure at pulsatile flow was 17-23% smaller than at steady-state flow. For both steady-state and pulsatile flow, the high flow rate had very little effect (&lt;5%) on the critical buckling pressure. The fluid and wall stresses were drastically altered at the location with maximum deflection. The maximum lumen shear stress occurred at the inner side of the bend and maximum tensile wall stresses occurred at the outer side. These findings improve our understanding of artery instability in vivo.

Pulmonary hypertension caused by pulmonary venous hypertension

The effect of pulmonary venous hypertension (PVH) on the pulmonary circulation is extraordinarily variable, ranging from no impact on pulmonary vascular resistance (PVR) to a marked increase. The reasons for this are unknown. Both acutely reversible pulmonary vasoconstriction and pathological remodeling (especially medial hypertrophy and intimal hyperplasia) account for increased PVR when present. The mechanisms involved in vasoconstriction and remodeling are not clearly defined, but increased wall stress, especially in small pulmonary arteries, presumably plays an important role. Myogenic contraction may account for increased vascular tone and also indirectly stimulate remodeling of the vessel wall. Increased wall stress may also directly cause smooth muscle growth, migration, and intimal hyperplasia. Even long-standing and severe pulmonary hypertension (PH) usually abates with elimination of PVH, but PVH-PH is an important clinical problem, especially because PVH due to left ventricular noncompliance lacks definitive therapy. The role of targeted PH therapy in patients with PVH-PH is unclear at this time. Most prospective studies indicate that these medications are not helpful or worse, but there is ample reason to think that a subset of patients with PVH-PH may benefit from phosphodiesterase inhibitors or other agents. A different approach to evaluating possible pharmacologic therapy for PVH-PH may be required to better define its possible utility.

Artery Remodeling Under Axial Twist in Three Days Organ Culture

Arteries often endure axial twist due to body movement and surgical procedures, but how arteries remodel under axial twist remains unclear. The objective of this study was to investigate early stage arterial wall remodeling under axial twist. Porcine carotid arteries were twisted axially and maintained for three days in ex vivo organ culture systems while the pressure and flow remained the same as untwisted controls. Cell proliferation, internal elastic lamina (IEL) fenestrae shape and size, endothelial cell (EC) morphology and orientation, as well as the expression of matrix metalloproteinases (MMPs), MMP-2 and MMP-9, and tissue inhibitor of metalloproteinase-2 (TIMP-2) were quantified using immunohistochemistry staining and immunoblotting. Our results demonstrated that cell proliferation in both the intima and media were significantly higher in the twisted arteries compared to the controls. The cell proliferation in the intima increased from 1.33 ± 0.21% to 7.63 ± 1.89%, and in the media from 1.93 ± 0.84% to 8.27 ± 2.92% (p < 0.05). IEL fenestrae total area decreased from 26.07 ± 2.13% to 14.74 ± 0.61% and average size decreased from 169.03 ± 18.85 μm(2) to 80.14 ± 1.96 μm(2) (p < 0.01), but aspect ratio increased in the twist group from 2.39 ± 0.15 to 2.83 ± 0.29 (p < 0.05). MMP-2 expression significantly increased (p < 0.05) while MMP-9 and TIMP-2 showed no significant difference in the twist group. The ECs in the twisted arteries were significantly elongated compared to the controls after three days. The angle between the major axis of the ECs and blood flow direction under twist was 7.46 ± 2.44 degrees after 3 days organ culture, a decrease from the initial 15.58 ± 1.29 degrees. These results demonstrate that axial twist can stimulate artery remodeling. These findings complement our understanding of arterial wall remodeling under mechanical stress resulting from pressure and flow variations.

Mechanical instability of normal and aneurysmal arteries

Tortuous arteries associated with aneurysms have been observed in aged patients with atherosclerosis and hypertension. However, the underlying mechanism is poorly understood. The objective of this study was to determine the effect of aneurysms on arterial buckling instability and the effect of buckling on aneurysm wall stress. We investigated the mechanical buckling and post-buckling behavior of normal and aneurysmal carotid arteries and aorta's using computational simulations and experimental measurements to elucidate the interrelationship between artery buckling and aneurysms. Buckling tests were done in porcine carotid arteries with small aneurysms created using elastase treatment. Parametric studies were done for model aneurysms with orthotropic nonlinear elastic walls using finite element simulations. Our results demonstrated that arteries buckled at a critical buckling pressure and the post-buckling deflection increased nonlinearly with increasing pressure. The presence of an aneurysm can reduce the critical buckling pressure of arteries, although the effect depends on the aneurysm's dimensions. Buckled aneurysms demonstrated a higher peak wall stress compared to unbuckled aneurysms under the same lumen pressure. We conclude that aneurysmal arteries are vulnerable to mechanical buckling and mechanical buckling could lead to high stresses in the aneurysm wall. Buckling could be a possible mechanism for the development of tortuous aneurysmal arteries such as in the Loeys-Dietz syndrome.

Fetal umbilical vein transplantation for the repair of middle cerebral artery injury

It is necessary to investigate the longitudinal tensile mechanical characteristics of the middle cerebral artery and the fetal umbilical vein prior to applying fetal umbilical vein transplantation for repair of injured middle cerebral artery. Fifteen fresh fetal umbilical vein specimens and 15 normal human fresh cadaver middle cerebral artery specimens were collected for longitudinal tensile testing at the speed of 0.5 mm/min and at normal human temperature. The results showed that under 16.0 kPa physiological stress, the strain value of fetal umbilical vein specimens was larger, while the maximal stress and elastic modulus values were less than those of middle cerebral artery specimens. Our findings indicate that fetal umbilical vein has good elastic properties and the stress-strain curve of the fetal umbilical vein is similar to that of the middle cerebral artery. Fetal umbilical vein transplantation can, therefore, potentially repair the injured middle cerebral artery.

An in vivo rat model of artery buckling for studying wall remodeling

Theoretical modeling and in vitro experiments have demonstrated that arterial buckling is a possible mechanism for the development of artery tortuosity. However, there has been no report of whether artery buckling develops into tortuosity, partially due to the lack of in vivo models for long-term studies. The objective of this study was to establish an in vivo buckling model in rat carotid arteries for studying arterial wall remodeling after buckling. Rat left carotid arteries were transplanted to the right carotid arteries to generate buckling under in vivo pressure and were maintained for 1 week to examine wall remodeling and adaptation. Our results showed that a significant buckling was achieved in the carotid arterial grafts with altered wall stress. Cell proliferation and matrix metalloprotinease-2 (MMP-2) expression in the buckled arteries increased significantly compared with the controls. The tortuosity level of the grafts also slightly increased 1 week post-surgery, while there was no change in vessel dimensions, blood pressure, and blood flow velocity. The artery buckling model provides a useful tool for further study of the adaptation of arteries into tortuous shapes.

Viscoelastic evaluation of fetal umbilical vein for reconstruction of middle cerebral artery

The transplantation of artificial blood vessels with < 6 mm inner diameter as substitutes for human arterioles or veins has not achieved satisfactory results. Umbilical vein has been substituted for ar-tery in vascular transplantation, but it remains unclear whether the stress relaxation and creep tween these vessels are consistent. In this study, we used the fetal umbilical vein and middle cere-bral artery from adult male cadavers to make specimens 15 mm in length, 0.196–0.268 mm in nica media thickness, and 2.82–2.96 mm in outer diameter. The results demonstrated that the stress decrease at 7 200 seconds was similar between the middle cerebral artery and fetal umbilical vein specimens, regardless of initial stress of 18.7 kPa or 22.5 kPa. However, the strain increase at 7 200 seconds of fetal umbilical veins was larger than that of middle cerebral arteries. Moreover, the stress relaxation experiment showed that the stress decrease at 7 200 seconds of the fetal umbilical vein and middle cerebral artery specimens under 22.5 kPa initial stress was less than the decrease in these specimens under 18.7 kPa initial stress. These results indicate that the fetal umbilical vein has appropriate stress relaxation and creep properties for transplantation. These properties are advantageous for vascular reconstruction, indicating that the fetal umbilical vein can be transplanted to repair middle cerebral artery injury.

Smooth muscle cell contraction increases the critical buckling pressure of arteries

Recent in vitro experiments demonstrated that arteries under increased internal pressure or decreased axial stretch may buckle into the tortuous pattern that is commonly observed in aging or diseased arteries in vivo. It suggests that buckling is a possible mechanism for the development of artery tortuosity. Vascular tone has significant effects on arterial mechanical properties but its effect on artery buckling is unknown. The objective of this study was to determine the effects of smooth muscle cell contraction on the critical buckling pressure of arteries. Porcine common carotid arteries were perfused in an ex vivo organ culture system overnight under physiological flow and pressure. The perfusion pressure was adjusted to determine the critical buckling pressure of these arteries at in vivo and reduced axial stretch ratios (1.5 and 1.3) at baseline and after smooth muscle contraction and relaxation stimulated by norepinephrine and sodium nitroprusside, respectively. Our results demonstrated that the critical buckling pressure was significantly higher when the smooth muscle was contracted compared with relaxed condition (97.3mmHg vs 72.9mmHg at axial stretch ratio of 1.3 and 93.7mmHg vs 58.6mmHg at 1.5, p<0.05). These results indicate that arterial smooth muscle cell contraction increased artery stability.

Effects of elastin degradation and surrounding matrix support on artery stability

Tortuous arteries are often associated with aging, hypertension, atherosclerosis, and degenerative vascular diseases, but the mechanisms are poorly understood. Our recent theoretical analysis suggested that mechanical instability (buckling) may lead to tortuous blood vessels. The objectives of this study were to determine the critical pressure of artery buckling and the effects of elastin degradation and surrounding matrix support on the mechanical stability of arteries. The mechanical properties and critical buckling pressures, at which arteries become unstable and deform into tortuous shapes, were determined for a group of five normal arteries using pressurized inflation and buckling tests. Another group of nine porcine arteries were treated with elastase (8 U/ml), and the mechanical stiffness and critical pressure were obtained before and after treatment. The effect of surrounding tissue support was simulated using a gelatin gel. The critical pressures of the five normal arteries were 9.52 kPa (SD 1.53) and 17.10 kPa (SD 5.11) at axial stretch ratios of 1.3 and 1.5, respectively, while model predicted critical pressures were 10.11 kPa (SD 3.12) and 17.86 kPa (SD 5.21), respectively. Elastase treatment significantly reduced the critical buckling pressure (P < 0.01). Arteries with surrounding matrix support buckled into multiple waves at a higher critical pressure. We concluded that artery buckling under luminal pressure can be predicted by a buckling equation. Elastin degradation weakens the arterial wall and reduces the critical pressure, which thus leads to tortuous vessels. These results shed light on the mechanisms of the development of tortuous vessels due to elastin deficiency.

Correlations between age, prestrain, diameter and atherosclerosis in the male abdominal aorta

The longitudinal prestrain of arteries facilitates their physiological function. Remodeling, adaptation and aging result in an age-dependent magnitude of the pretension. Although the phenomenon is known, detailed statistics, especially for human arteries, are lacking. This study was designed to propose the regression model capable of estimating the prestrain of the human abdominal aorta. The length of the abdominal aorta before, l, and after excision from the body, L, the diameter, heart weight, thickness of left ventricle and degree of atherosclerosis were collected in autopsies of 156 male cadavers of known age. Longitudinal prestrain was quantified by means of the stretch ratio λ=l/L. Statistical analysis revealed significant dependence between age, prestrain, diameter and atherosclerosis, which were best fitted to the power law equation. Longitudinal prestretch reduced with age significantly; λmean=1.30±0.07 for age<30 (n=29), whereas λmean=1.06±0.03 for age>59 (n=31) with p-value<0.0001. Raw data gave linear correlation coefficients as follows: λ-age (R=-0.842); l-age (R=0.023); L-age (R=0.476); (l-L)-age (R=-0.811). It was concluded that longitudinal prestrain decreases nonlinearly with age and both age and diameter are suitable predictors of the prestrain. Data suggests that unloaded length elongates with age in contrast to the elastic retraction.

Tissue Engineering of Blood Vessels: Functional Requirements, Progress, and Future Challenges

Vascular disease results in the decreased utility and decreased availability of autologus vascular tissue for small diameter (< 6 mm) vessel replacements. While synthetic polymer alternatives to date have failed to meet the performance of autogenous conduits, tissue-engineered replacement vessels represent an ideal solution to this clinical problem. Ongoing progress requires combined approaches from biomaterials science, cell biology, and translational medicine to develop feasible solutions with the requisite mechanical support, a non-fouling surface for blood flow, and tissue regeneration. Over the past two decades interest in blood vessel tissue engineering has soared on a global scale, resulting in the first clinical implants of multiple technologies, steady progress with several other systems, and critical lessons-learned. This review will highlight the current inadequacies of autologus and synthetic grafts, the engineering requirements for implantation of tissue-engineered grafts, and the current status of tissue-engineered blood vessel research.

Effects of Axial Stretch on Cell Proliferation and Intimal Thickness in Arteries in Organ Culture

Intimal hyperplasia (IH) remains the major cause of intermediate and long-term failure of vascular grafts and endovascular interventions. Arteries are subjected to a significant longitudinal stress in addition to the shear stress and tensile stress from the blood flow. The aim of this study was to determine the effect of axial stretch on cell proliferation and IH in arteries. Porcine carotid arteries, intact or endothelial cell (EC) denudated, were maintained ex vivo at different stretch ratios (1.3, 1.5, and 1.8) and flow rates (16 or 160 mL/min) while remaining at physiologic pressure for 7 days. The viability of the arteries was verified with norepinephrine, carbachol, and sodium nitroprusside stimulations, and the cell proliferation was detected using bromodeoxyuridine labeling and immunostaining. Our results showed that the axial stretch ratio did not significantly affect intimal thickness and cell proliferation in normal arteries. However, axial stretch increased the neointimal thickness in EC denudated arteries cultured under low flow conditions. The cell proliferation increased significantly in the intima and inner half of the media of the EC denudated arteries under normal or elevated axial stretch in comparison to intact arteries at the same stretch ratio. These results demonstrated that axial stretch with EC denudation and low flow increases neointimal formation and cell proliferation in the arteries.

Arterial pO₂ stimulates intimal hyperplasia and serum stimulates inward eutrophic remodeling in porcine saphenous veins cultured ex vivo

Ex vivo culture of arteries and veins is an established tool for investigating mechanically induced remodeling. Porcine saphenous veins (PSV) cultured ex vivo with a venous mechanical environment, serum-supplemented cell-culture medium and standard cell-culture conditions (5% CO₂ and 95% balance air ~140 mmHg pO₂) develop intimal hyperplasia (IH), increased cellular proliferation, decreased compliance and exhibit inward eutrophic remodeling thereby suggesting that nonmechanical factors stimulate some changes observed ex vivo. Herein we explore the contribution of exposure to greater than venous pO₂ and serum to these changes in cultured veins. Removing serum from culture medium did not inhibit development of IH, but did reduce cellular proliferation and inward eutrophic remodeling. In contrast, veins perfused using reduced pO₂ (75 mmHg) showed reduced IH. Among the statically cultured vessels, veins cultured at arterial pO₂ (95 mmHg) and above showed IH as well as increase in proliferation and vessel weight compared to fresh veins; veins cultured at venous pO₂ did not. Taken together, these data suggest that exposure of SV to arterial pO₂ stimulates IH and cellular proliferation independent of changes in the mechanical environment, which might provide insight into the etiology of IH in SV used as arterial grafts.

Mechanical buckling of veins under internal pressure

Venous tortuosity is associated with multiple disease states and is often thought to be a consequence of venous hypertension and chronic venous disease. However, the underlying mechanisms of vein tortuosity are unclear. We hypothesized that increased pressure causes vein buckling that leads to a tortuous appearance. The specific aim of this study was to determine the critical buckling pressure of veins. We determined the buckling pressure of porcine jugular veins and measured the mechanical properties of these veins. Our results showed that the veins buckle when the transmural pressure exceeds a critical pressure that is strongly related to the axial stretch ratio in the veins. The critical pressures of the eight veins tested were 14.2 +/- 5.4 and 26.4 +/- 9.0 mmHg at axial stretch ratio 1.5 and 1.7, respectively. In conclusion, veins buckle into a tortuous shape at high lumen pressures or reduced axial stretch ratios. Our results are useful in understanding the development of venous tortuosity associated with varicose veins, venous valvular insufficiency, diabetic retinopathy, and vein grafts.

A novel cylindrical biaxial computer-controlled bioreactor and biomechanical testing device for vascular tissue engineering

It is becoming evident that tissue-engineered constructs adapt to altered mechanical loading, and that specific combinations of multidirectional loads appear to have a synergistic effect on the remodeling. However, most studies of mechanical stimulation of engineered vascular tissue engineering employ only uniaxial stimulation. Here we present a novel computer-controlled bioreactor and biomechanical testing device designed to precisely and simultaneously control mean and cyclic values of transmural pressure (at rates up to 1 Hz and ranges of 40 mmHg), luminal flow rate, and axial length (or load) applied to gel-derived, scaffold-derived, and self-assembly-derived tissue-engineered blood vessels during culture, while monitoring vessel geometry with a resolution of 6.6 mum. Intermittent monitoring of the extracellular matrix and cells is accomplished on live tissues using multi-photon confocal microscopy under unloaded and loaded conditions at multiple time-points in culture (on the same vessel) to quantify changes in cell and extracellular matrix content and organization. This same device is capable of performing intermittent cylindrical biaxial biomechanical testing at multiple time-points in culture (on the same vessel) to quantify changes in the mechanical behavior during culture. Here we demonstrate the capabilities of this new device on self-assembly-derived and collagen-gel-derived tissue-engineered blood vessels.

System and method for investigating arterial remodeling

Organ culture systems are used to study remodeling of arteries and to fabricate tissue engineered vascular grafts. Investigations to date focused on changes in geometry and mechanical response of arteries or constructs associated with controlled sustained alterations in the global load parameters such as the arterial pressure, flow, or axial stretch. A new experimental paradigm is proposed, which is based on the simultaneous independent control of local mechanical parameters such as mean strain or stress in the arterial wall and flow-induced shear at the intima. An organ culture system and methodology were developed, which controls pressure, flow, and axial length of a specimen in order to maintain the local mechanical parameters at prescribed values. The operation of the system is illustrated by maintenance of elevated axial medial stress in porcine carotid artery, while keeping the mean circumferential stress and flow-induced shear stress at baseline values. Previously unknown aspects of remodeling that might be revealed by the novel approach are discussed.

Alterations of pulse pressure stimulate arterial wall matrix remodeling

The effect of pulse pressure on arterial wall remodeling has not been clearly defined. The objective of this study was to evaluate matrix remodeling in arteries under nonpulsatile and hyperpulsatile pressure as compared with arteries under normal pulsatile pressure. Porcine carotid arteries were cultured for 3 and 7 days under normal, nonpulsatile, and hyperpulsatile pressures with the same mean pressure and flow rate using an ex vivo organ culture model. Fenestrae in the internal elastic lamina, collagen, fibronectin, and gap junction protein connexin 43 were examined in these arteries using confocal microscopy, immunoblotting, and immunohistochemistry. Our results showed that after 7 days, the mean fenestrae size and the area fraction of fenestrae decreased significantly in nonpulsatile arteries (51% and 45%, respectively) and hyperpulsatile arteries (45% and 54%, respectively) when compared with normal pulsatile arteries. Fibronectin decreased (29.9%) in nonpulsatile arteries after 3 days but showed no change after 7 days, while collagen I levels increased significantly (106%) in hyperpulsatile arteries after 7 days. The expression of connexin 43 increased by 35.3% in hyperpulsatile arteries after 7 days but showed no difference in nonpulsatile arteries. In conclusion, our results demonstrated, for the first time, that an increase or a decrease in pulse pressure from its normal physiologic level stimulates structural changes in the arterial wall matrix. However, hyperpulsatile pressure has a more pronounced effect than the diminished pulse pressure. This effect helps to explain the correlation between increasing wall stiffness and increasing pulse pressure in vivo.

Comparison of artery organ culture and co-culture models for studying endothelial cell migration and its effect on smooth muscle cell proliferation and migration

Arterial restenosis associated with intimal hyperplasia is the major cause of long-term failure of vascular interventions. Endothelium injury and the proliferation and migration of smooth muscle cells (SMC) are key events in the development of intimal hyperplasia. The objectives of this study were to develop an ex vivo artery injury model for studying endothelial cell (EC) migration and to compare it with an in vitro co-culture arterial wall injury model in terms of the effect of flow on EC migration and its effect on SMC migration and proliferation. Our results demonstrated that shear flow improves reendothelialization in the injured area by promoting EC migration. The migration distance of ECs is much smaller in the arteries than in an in vitro cell culture model (3.57+/-1.29 mm vs. 5.2+/-1.4 cm, p<0.001). SMC proliferation was significantly less in the EC intact and reendothelialization areas than in the EC denuded areas indicating that reendothelialization suppresses SMC proliferation. Our models provide a new approach to study techniques to enhance endothelium healing.

Hemodynamics and axial strain additively increase matrix remodeling and MMP-9, but not MMP-2, expression in arteries engineered by directed remodeling

We previously demonstrated the ability to create engineered arteries by carefully controlling the mechanical environment of intact arteries perfused ex vivo, yielding engineered arteries with native appearance and vasoactive response. Increased axial strain was sufficient to increase length up to 20% in 9 days through a growth and remodeling response. The amount of the achievable length increase, however, was highly dependent on the hemodynamic conditions acting through unknown mechanisms. Because matrix metalloproteinase-2 (MMP-2) and matrix metalloproteinase-9 (MMP-9) activity is increased, and often required, in mechanically induced remodeling in vivo, MMP-2 and MMP-9 expression was investigated to elucidate the hemodynamic mediation of artery length. Carotid arteries from 30 kg pigs were perfused for 9 days ex vivo at either in situ axial strain or with a gradual 50% increase in axial strain, under either arterial or reduced hemodynamics ( approximately 10% of arterial hemodynamics). MMP-2 protein expression increased roughly twofold, while MMP-9 expression increased threefold under either reduced hemodynamics or increased axial strain (p < 0.05). The combination of reduced hemodynamics with increased axial strain demonstrated an additive increase in MMP-9 protein (p < 0.05) with no further change in MMP-2 expression. To investigate the mechanism by which axial strain and hemodynamics could additively increase MMP-9 expression, the expression of nuclear factor kappa B (NF-kappaB) subunits p50 and p65 was evaluated. Axial strain stimulated p65 expression and localization, while hemodynamics increased p50 expression, with both molecules being expressed only when both mechanical stimuli were applied. These data suggest that MMP-9 expression can be simultaneously stimulated by separate mechanical stimuli mediated by p50 and p65 expression, and that by using conditions that maximize MMP-9 expression, we can create an optimal remodeling environment to better direct the growth of engineered arteries and other tissues.

The benefit of stretching along the artery

Many rehabilitation exercises involve the stretching of bodies. We point out the necessity of the longitudinal stretching in arteries. The efficiency of an arterial system is closely related to the condition of the transverse vibration of the arterial walls or to the magnitudes of the area oscillation in all blood vessels. For a given blood pressure wave, a more elastic arterial wall has larger area oscillation, and therefore a higher efficiency in circulation. Elastic properties of the artery depend on the longitudinal stretching. In vitro experiment on pig aorta confirms that proper longitudinal stretching increases its elasticity and benefits to the circulatory system.

Fundamental role of axial stress in compensatory adaptations by arteries

Arteries exhibit a remarkable ability to adapt to diverse genetic defects and sustained alterations in mechanical loading. For example, changes in blood flow induced wall shear stress tend to control arterial caliber and changes in blood pressure induced circumferential wall stress tend to control wall thickness. We submit, however, that the axial component of wall stress plays a similarly fundamental role in controlling arterial geometry, structure, and function, that is, compensatory adaptations. This observation comes from a review of findings reported in the literature and a comparison of four recent studies from our laboratory that quantified changes in the biaxial mechanical properties of mouse carotid arteries in cases of altered cell-matrix interactions, extracellular matrix composition, blood pressure, or axial extension. There is, therefore, a pressing need to include the fundamental role of axial wall stress in conceptual and theoretical models of arterial growth and remodeling and, consequently, there is a need for increased attention to evolving biaxial mechanical properties in cases of altered genetics and mechanical stimuli.

Morphologic adaptation of arterial endothelial cells to longitudinal stretch in organ culture

Arteries in vivo are subjected to large longitudinal stretch, which changes significantly due to vascular disease and surgery. However, little is known about the effect of longitudinal stretch on arterial endothelium. The aim of this study was to determine the morphologic adaptation of arterial endothelial cells (ECs) to elevated axial stretch. Porcine carotid arteries were stretched 20% more than their in vivo length while being maintained at physiological pressure and flow rate in an organ culture system. The ECs were elongated with the application of the axial stretch (aspect ratio 2.81+/-0.25 versus 3.65+/-0.38, n=8, p<0.001). The elongation was slightly decreased after three days and the ECs recovered their normal shape after seven days, as measured by the shape index and aspect ratio (0.55+/-0.03 versus 0.56+/-0.04, and 2.93+/-0.28 versus 2.88+/-0.20, respectively, n=5). Cell proliferation was increased in the intima of stretched arteries in three days as compared to control arteries but showed no difference after seven days in organ culture. These results demonstrate that the ECs adapt to axial stretch and maintain their normal shape.

Arteries respond to independent control of circumferential and shear stress in organ culture

Arteries respond to changes in global mechanical parameters (pressure, flow rate, and longitudinal stretching) by remodeling to restore local parameters (circumferential stress, shear stress, and axial strain) to baseline levels. Because a change in a single global parameter results in changes of multiple local parameters, the effects of individual local parameters on remodeling remain unknown. This study uses a novel approach to study remodeling in organ culture based on independent control of local mechanical parameters. The approach is illustrated by studying the short term effects of circumferential and shear stress on remodeling-related biological markers. Porcine carotid arteries were cultured for 3 days at a circumferential stress of 50 or 150 kPa or, in separate experiments, a shear stress of 0.75 or 2.25 Pa. At high circumferential stress, matrix synthesis, smooth muscle cell proliferation, and cell death are significantly greater, but matrix metalloproteinase-2 (MMP-2) and pro-MMP-2 activity are significantly less. In contrast, biological markers measured were unaffected by shear stress. Applications of the proposed approach for improved understanding of remodeling, optimizing mechanical conditioning of tissue engineered arteries, and selection of experimentally motivated growth laws are discussed.

A biomechanical model of artery buckling

The stability of arteries under blood pressure load is essential to the maintenance of normal arterial function and the loss of stability can lead to tortuosity and kinking that are associated with significant clinical complications. However, mechanical analysis of arterial bent buckling is lacking. To address this issue, this paper presents a biomechanical model of arterial buckling. Using an elastic cylindrical arterial model, the mechanical equations for arterial buckling were developed and the critical buckling pressure was found to be a function of the wall stiffness (Young's modulus), arterial radius, length, wall thickness, and the axial strain. Both the model equations and experimental results demonstrated that the critical pressure is related to the axial strain. Arteries may buckle and become tortuous due to reduced (subphysiological) axial strain, hypertensive pressure, and a weakened wall. These results are in accordance with, and provide a possible explanation to the clinical observations that hypertension and aging are the risk factors for arterial tortuosity and kinking. The current model is also applicable to veins and ureters.

Altered biomechanical properties of carotid arteries in two mouse models of muscular dystrophy

Muscular dystrophy is characterized by skeletal muscle weakness and wasting, but little is known about possible alterations to the vasculature. Many muscular dystrophies are caused by a defective dystrophin-glycoprotein complex (DGC), which plays an important role in mechanotransduction and maintenance of structural integrity in muscle cells. The DGC is a group of membrane-associated proteins, including dystrophin and sarcoglycan-delta, that helps connect the cytoskeleton of muscle cells to the extracellular matrix. In this paper, mice lacking genes encoding dystrophin (mdx) or sarcoglycan-delta (sgcd-/-) were studied to detect possible alterations to vascular wall mechanics. Pressure-diameter and axial force-length tests were performed on common carotid arteries from mdx, sgcd-/-, and wild-type mice in active (basal) and passive smooth muscle states, and functional responses to three vasoactive compounds were determined at constant pressure and length. Apparent biomechanical differences included the following: mdx and sgcd-/- arteries had decreased distensibilities in pressure-diameter tests, with mdx arteries exhibiting elevated circumferential stresses, and mdx and sgcd-/- arteries generated elevated axial loads and stresses in axial force-length tests. Interestingly, however, mdx and sgcd-/- arteries also had significantly lower in vivo axial stretches than did the wild type. Accounting for this possible adaptation largely eliminated the apparent differences in circumferential and axial stiffness, thus suggesting that loss of DGC proteins may induce adaptive biomechanical changes that can maintain overall wall mechanics in response to normal loads. Nevertheless, there remains a need to understand better possible vascular adaptations in response to sustained altered loads in patients with muscular dystrophy.

Effects of biaxial stretch on arteriolar function in vitro

Mounting evidence suggests that the normal biomechanical state of arteries may include a nearly equibiaxial intramural stress and that arteries tend to undergo rapid and dramatic remodeling when perturbed from this normal state. Technical developments since the early 1980s have enabled in vitro (acute) and ex vivo (chronic culture) study of isolated, perfused microvessels, and it is clear that these vessels share many functional similarities with arteries. To date, however, there has been no systematic study of the effects of in-plane biaxial loading on the biomechanical behavior of arterioles. Here we describe a modification to a prior in vitro arterial test system that allowed us to investigate the role of altered axial stretch on the passive, myogenic, and norepinephrine-stimulated biaxial behavior of isolated rat cremaster arterioles. We show that axial stretches from 85% to 110% of values often used in the laboratory and consistent with those normally experienced in situ induce modest changes in the measured mean circumferential and axial stress-stretch behavior and in measures of distensibility and myogenic index. Nevertheless, altered axial stretch has a dramatic effect on the biaxial state of stress, and nearly equibiaxial stresses occur at axial stretches larger than those typically used in isolated arteriole studies. This finding is consistent with estimates of material and functional behavior in arterioles and suggests that long-term ex vivo studies, wherein vessel growth and remodeling are critical, should be performed at higher axial lengths than have been used during most prior in vitro tests.

Biomechanics of the cardiovascular system: the aorta as an illustratory example

Biomechanics relates the function of a physiological system to its structure. The objective of biomechanics is to deduce the function of a system from its geometry, material properties and boundary conditions based on the balance laws of mechanics (e.g. conservation of mass, momentum and energy). In the present review, we shall outline the general approach of biomechanics. As this is an enormously broad field, we shall consider a detailed biomechanical analysis of the aorta as an illustration. Specifically, we will consider the geometry and material properties of the aorta in conjunction with appropriate boundary conditions to formulate and solve several well-posed boundary value problems. Among other issues, we shall consider the effect of longitudinal pre-stretch and surrounding tissue on the mechanical status of the vessel wall. The solutions of the boundary value problems predict the presence of mechanical homeostasis in the vessel wall. The implications of mechanical homeostasis on growth, remodelling and postnatal development of the aorta are considered.

BIOMECHANICAL CONSIDERATIONS IN THE DESIGN OF GRAFT: THE HOMEOSTASIS HYPOTHESIS

Since its inception in the 1960s, coronary artery bypass graft (CABG) evolved as one of the most common, best documented, and most effective of all major surgical treatments for ischemic heart disease. Despite its widespread use, however, the outcome is not always completely satisfactory. The objective of this review is to highlight the physical determinants of biomechanical design of CABG so that future procedures would have prolonged patency and better outcome. Our central axiom postulates the existence of a mechanical homeostatic state of the blood vessel, i.e., the variation in vessel wall stresses and strains are relatively small under physiological conditions. Any perturbation of mechanical homeostasis leads to growth and remodeling. In this sense, stenosis and failure of a graft may be viewed as an adaptation process gone awry. We outline the principles of engineering design and discuss the biofluid and biosolid mechanics principles that may have the greatest bearing on mechanical homeostasis and the long-term outcome of CABG.

Biaxial biomechanical adaptations of mouse carotid arteries cultured at altered axial extension

Many have studied the roles of altered blood flow and pressure on adaptive responses of blood vessels, but few have studied the role of altered axial loads. We exposed common carotid arteries from wild-type mice to low, medium, or high axial extensions while maintaining the same pressure and luminal flow rate for two days in culture, and studied adaptations in vessel geometry, in vitro loads, and stresses while collecting biaxial biomechanical (pressure-diameter and axial force-length) data on Day 0 (initial control conditions), Day 1, and Day 2. In addition, we compared vasoreactive responses to phenylephrine, carbamylcholine chloride, and sodium nitroprusside at the end of the 2-day culture period. We found significant differences in the structural (e.g., pressure-axial force and axial force-length) responses between groups as well as within each group over time. These adaptations seem to be aimed at restoring the mechanical state from a perturbed condition (e.g., low or high axial extension) toward a normal 'homeostatic' condition. Although structural responses (e.g., pressure-axial force and axial force-length) differed between groups on Day 2, the material behavior (e.g., circumferential and axial stress-stretch responses) did not differ significantly between groups.

Hemodynamic conditions alter axial and circumferential remodeling of arteries engineered ex vivo

We previously demonstrated that growth and remodeling was stimulated in arteries elongated ex vivo using step increases in axial strain. Viability and vasoactivity were similar to fresh arteries, however there was a substantial decrease in the ultimate circumferential stress. To test the hypothesis that the subphysiological perfusion conditions (i.e., low pressure and flow) previously used caused the reduction, arteries were subjected to the identical elongation protocol (50% increase over 9 days) while being perfused with physiological levels of flow, viscosity and pulsatile pressure. A significant increase in unloaded length was achieved by elongation under both perfusion conditions, although the increase was less under physiological (7 +/- 1%) than under subphysiological conditions (19 +/- 2%, p < 0.005). When length at physiological stress was estimated using mechanical testing data the values were similar. The ultimate circumferential stress of arteries elongated under physiological conditions was increased (33%), whereas the ultimate axial stress was decreased (50%) as compared with arteries elongated under subphysiological conditions. Elongated arteries under both perfusion conditions showed significant increases in proliferation and collagen mass, and similar viability and appearance to fresh arteries. These data suggest that there is substantial cross-talk between perfusion conditions and axial strain that modulates arterial remodeling and length.

Sustained axial loading lengthens arteries in organ culture

Although it has been recognized for many years that arteries in vivo exist under significant axial strain, studies of the adaptation of arteries to elevated axial strain have only recently been conducted. To determine the effects of sustained elevation of axial loading on arterial structure and function, axial stresses of 250 kPa or greater were applied to porcine common carotid arteries maintained in a perfusion organ culture system for 7 days at physiologic pressure and flow conditions. Our results demonstrated that axial stretch could lead to an increase in unloaded length that was proportional to the axial stretch ratio (stretched length divided by unloaded length) when the axial stretch ratio was above a threshold value of 2.14. Below this threshold, no significant length change occurred. Above this threshold, a significant increase in unloaded length (13 +/- 7%,) and the number of smooth muscle cell nuclei (20 +/- 7%) was observed. Permanent length change was associated with a significant decrease in axial stiffness, and the maximum elongation achieved was limited by rupture of the arterial wall. All tested arteries demonstrated good viability and strong vasomotor responses. These results show that arteries in organ culture can elongate under sustained axial loading.

Changes of opening angle in hypertensive and hypotensive arteries in 3-day organ culture

To study the effect of pressure changes on the opening angle of arteries in organ culture, tubular segments of porcine common carotid arteries were cultured with pulsatile flow perfusion under hypertensive (150+/-20 mmHg), normotensive (100+/-20 mmHg), or hypotensive (30+/-10 mmHg) pressure while maintaining the arteris at a physiological wall shear stress of approximately 15 dyn/cm(2) for up to 3 days. Arteries were then cut into short ring segments by sections perpendicular to the axis and then cut open radially to observe the opening angle in aerated phosphate buffered saline solution (37 degrees C). Norepinephrine (NE, 10 microM), carbacol (CCh, 100 microM), and sodium nitroprusside (SNP, 10 microM) were added after the radial cut at 30, 20, and 30 min intervals, the opening angles were measured, respectively. Results show that hypertensive arteries developed a significantly larger opening angle than normotensive and hypotensive arteries, associated with a significant increase in cell proliferation. In addition, with smooth muscle contraction activated by NE, the opening angle decreases significantly in hypertensive arteries but has little change in hypotensive and normotensive arteries, indicating an enhancement of smooth muscle contraction on the lumen side of the hypertensive arterial wall. In comparison, hypotensive pressure has little effect on arterial opening angle and cell proliferation.

Effects of a sustained extension on arterial growth and remodeling: a theoretical study

Three recent studies reveal that the unloaded length of a carotid artery increases significantly and rapidly in response to sustained increases in axial extension. Moreover, such lengthening involves an "unprecedented" increase in the rate of turnover of cells and matrix. Although current data are not sufficient for detailed biomechanical analyses, we present general numerical simulations that are consistent with the reported observations and support the hypothesis that rates of turnover correlate with the extent that stresses are perturbed from normal. In particular, a 3-D analysis of wall stress suggests that moderate (15%) increases in axial extension can increase the axial stress to a much greater extent than marked (50%) increases in blood pressure increase the circumferential stress. Furthermore, such increases in axial stress can occur without inducing significant gradients in stress within the wall. Consequently, we use a new, 2-D constrained mixture model to study evolving changes in the geometry, structure, and properties of carotid arteries in response to a sustained increase in axial extension. These simulations are qualitatively similar to the reports in the literature and support the notion that the stress-free lengths of individual constituents evolve during growth and remodeling.

Biaxial incremental homeostatic elastic moduli of coronary artery: two-layer model

The detailed mechanical properties of various layers of the coronary artery are important for understanding the function of the vessel. The present article is focused on the determination of the incremental modulus in different layers and directions in the neighborhood of the in vivo state. The incremental modulus can be defined for any material subjected to a large deformation if small perturbations in strain lead to small perturbations of stresses in a linear fashion. This analysis was applied to the porcine coronary artery, which was treated as a two-layered structure consisting of an inner intima-media layer and an outer adventitia layer. We adopted a theory based on small-perturbation experiments at homeostatic conditions for determination of incremental moduli in circumferential, axial, and cross directions in the two layers. The experiments were based on inflation and axial stretch. We demonstrate that under homeostatic conditions the incremental moduli are layer- and direction dependent. The incremental modulus is highest in the circumferential direction. Furthermore, in the circumferential direction, the media is stiffer than the whole wall, which is stiffer than the adventitia. In the axial direction, the adventitia is stiffer than the intact wall, which is stiffer than the media. Hence, the coronary artery must be treated as a composite, nonisotropic body. The data acquire physiological relevance in relation to coronary artery health and disease.

A computational model for collagen fibre remodelling in the arterial wall

As the interaction between tissue adaptation and the mechanical condition within tissues is complex, mathematical models are desired to study this interrelation. In this study, a mathematical model is presented to investigate the interplay between collagen architecture and mechanical loading conditions in the arterial wall. It is assumed that the collagen fibres align along preferred directions, situated in between the principal stretch directions. The predicted fibre directions represent symmetrically arranged helices and agree qualitatively with morphometric data from literature. At the luminal side of the arterial wall, the fibres are oriented more circumferentially than at the outer side. The discrete transition of the fibre orientation at the media-adventitia interface can be explained by accounting for the different reference configurations of both layers. The predicted pressure-radius relations resemble experimentally measured sigma-shaped curves. As there is a strong coupling between the collagen architecture and the mechanical loading condition within the tissue, we expect that the presented model for collagen remodelling is useful to gain further insight into the processes involved in vascular adaptation, such as growth and smooth muscle tone adaptation.