CT-based analysis of dose homogeneity in total body irradiation using lateral beam

Idiopathic Pneumonitis Syndrome After Total Body Irradiation in Pediatric Patients Undergoing Myeloablative Hematopoietic Stem Cell Transplantation: A PENTEC Comprehensive Review

PURPOSE

Pulmonary complications, especially idiopathic pneumonitis syndrome (IPS), are potentially life altering or fatal sequelae of hematopoietic cell transplantation (HCT). Total body irradiation (TBI) as part of the conditioning regimen has been implicated in IPS. A comprehensive PENTEC (Pediatric Normal Tissues in the Clinic) review was performed to increase our understanding of the role of TBI in the development of acute, noninfectious IPS.

METHODS AND MATERIALS

A systematic literature search was conducted using the MEDLINE, PubMed, and Cochrane library databases for articles describing pulmonary toxicity in children treated with HCT. Data pertaining to TBI and pulmonary endpoints were extracted. Risk of IPS was analyzed in relation to patient age, TBI dose, fractionation, dose rate, lung shielding, timing, and type of transplant, with the goal to better understand factors associated with this complication in children undergoing HCT. A logistic regression model was developed using a subset of studies with comparable transplant regimens and sufficient TBI data.

RESULTS

Six studies met criteria for modeling of the correlation of TBI parameters with IPS; all consisted of pediatric patients undergoing allogeneic HCT with a cyclophosphamide-based chemotherapy regimen. IPS was variably defined, but all studies that reported IPS were included in this analysis. The mean incidence of post-HCT IPS was 16% (range, 4%-41%). Mortality from IPS, when it occurred, was high (median, 50%; range, 45%-100%). Fractionated TBI prescription doses encompassed a narrow range of 9 to 14 Gy. Many differing TBI methods were reported, and there was an absence of 3-dimensional dose analysis of lung blocking techniques. Thus, a univariate correlation between IPS and total TBI dose, dose fractionation, dose rate, or TBI technique could not be made. However, a model, built from these studies based on prescribed dose using a normalized dose parameter of equivalent dose in 2-Gy fractions (EQD2), adjusted for dose rate, suggested correlation with the development of IPS (P = .0004). The model-predicted odds ratio for IPS was 24.3 Gy-1 (95% confidence interval, 7.0-84.3). Use of TBI lung dose metrics (eg, midlung point dose) could not be successfully modeled, potentially because of dosimetric uncertainties in the actual delivered volumetric lung dose and imperfections in our modeling process.

CONCLUSIONS

This PENTEC report is a comprehensive review of IPS in pediatric patients receiving fractionated TBI regimens for allogenic HCT. IPS was not clearly associated with 1 single TBI factor. Modeling using dose-rate adjusted EQD2 showed a response with IPS for allogeneic HCT using a cyclophosphamide-based chemotherapy regimen. Therefore, this model suggests IPS mitigation strategies can focus on not just the dose and dose per fraction but also the dose rate used in TBI. More data are needed to confirm this model and to determine the influence of chemotherapy regimens and contribution from graft-versus-host disease. The presence of confounding variables (eg, systemic chemotherapies) that affect risk, the narrow range of fractionated TBI doses found in the literature, and limitations of other reported data (eg, lung point dose) may have prevented a more straightforward link between IPS and total dose from being observed.

Total body irradiation delivered using a dedicated Co-60 TBI unit: Evaluation of dosimetric uniformity and dose verification

This work presents the dosimetric characteristics of Total Body Irradiation (TBI) delivered using a dedicated Co-60 TBI unit. We demonstrate the ability to deliver a uniform dose to the entire patient without the need for a beam spoiler or patient-specific compensation. Full dose distributions are calculated using an in-house Monte Carlo treatment planning system, and cumulative dose distributions are created by deforming the dose distributions within two different patient orientations. Sample dose distributions and profiles are provided to illustrate the plan characteristics, and dose and DVH statistics are provided for a heterogeneous cohort of patients. The patient cohort includes adult and pediatric patients with a range of 132-198 cm in length and 16.5-37.5 cm in anterior-posterior thickness. With the exception of the lungs, a uniform dose of 12 Gy is delivered to the patient with nearly the entire volume receiving a dose within 10% of the prescription dose. Mean lung doses (MLDs) are maintained below the estimated threshold for radiation pneumonitis, with MLDs ranging from 7.3 to 9.3 Gy (estimated equivalent dose in 2 Gy fractions (EQD2 ) of 6.2-8.5 Gy). Dose uniformity is demonstrated across five anatomical locations within the patient for which mean doses are all within 3.1% of the prescription dose. In-vivo dosimetry demonstrates excellent agreement between measured and calculated doses, with 78% of measurements within ±5% of the calculated dose and 99% within ±10%. These results demonstrate a state-of-the-art TBI planning and delivery system using a dedicated TBI unit and hybrid in-house and commercial planning techniques which provide comprehensive dosimetric data for TBI treatment plans that are accurately verified using in-vivo dosimetry.

Optimized Conformal Total Body Irradiation with VMAT Using a Linear-Accelerator-Based Radiosurgery Treatment System in Comparison to the Golden Standard Helical TomoTherapy

Modern irradiation techniques for optimized conformal TBI can be realized by Helical Tomotherapy (HT) or Volumetric Modulated Arc Therapy (VMAT), depending on the availability of suitable specialized equipment. In this dosimetric planning study, we compared both modalities and addressed the question of whether VMAT with small field sizes is also suitable as a backup in case of HT equipment malfunctions. For this purpose, we retrospectively used planning computed tomography (CT) data from 10 patients treated with HT with a total dose of 8 Gy (n = 5) or 12 Gy (n = 5) for treatment planning for VMAT with a small field size (36 × 22 cm). The target volume coverage, dose homogeneity at target volume, and dose reduction in organs at risk (OAR) (lungs, kidneys, lenses) were analyzed and compared. One patient was irradiated with both modalities due to a device failure of the HT equipment during the study, which facilitated a comparison in a real clinical setting. The findings indicate that in addition to a higher mean dose to the lenses in the 12 Gy group for VMAT and a better dose homogeneity in the target volume for HT, comparably good and adequate target dose coverage and dose reduction in the other OAR could be achieved for both modalities, with significantly longer treatment times for VMAT. In conclusion, after appropriate optimization of the treatment times, VMAT using linear accelerator radiosurgery technology can be used both as a backup in addition to HT and in clinical routines to perform optimized conformal TBI.

Improving total body irradiation with a dedicated couch and 3D-printed patient-specific lung blocks: A feasibility study

Introduction

Total body irradiation (TBI) is an important component of the conditioning regimen in patients undergoing hematopoietic stem cell transplants. TBI is used in very few patients and therefore it is generally delivered with standard linear accelerators (LINACs) and not with dedicated devices. Severe pulmonary toxicity is the most common adverse effect after TBI, and patient-specific lead blocks are used to reduce mean lung dose. In this context, online treatment setup is crucial to achieve precise positioning of the lung blocks. Therefore, in this study we aim to report our experience at generating 3D-printed patient-specific lung blocks and coupling a dedicated couch (with an integrated onboard image device) with a modern LINAC for TBI treatment.

Material and methods

TBI was planned and delivered (2Gy/fraction given twice a day, over 3 days) to 15 patients. Online images, to be compared with planned digitally reconstructed radiographies, were acquired with the couch-dedicated Electronic Portal Imaging Device (EPID) panel and imported in the iView software using a homemade Graphical User Interface (GUI). In vivo dosimetry, using Metal-Oxide Field-Effect Transistors (MOSFETs), was used to assess the setup reproducibility in both supine and prone positions.

Results

3D printing of lung blocks was feasible for all planned patients using a stereolithography 3D printer with a build volume of 14.5×14.5×17.5 cm³. The number of required pre-TBI EPID-images generally decreases after the first fraction. In patient-specific quality assurance, the difference between measured and calculated dose was generally<2%. The MOSFET measurements reproducibility along each treatment and patient was 2.7%, in average.

Conclusion

The TBI technique was successfully implemented, demonstrating that our approach is feasible, flexible, and cost-effective. The use of 3D-printed patient-specific lung blocks have the potential to personalize TBI treatment and to refine the shape of the blocks before delivery, making them extremely versatile.

Total marrow irradiation versus total body irradiation using intensity-modulated helical tomotherapy

BACKGROUND

Total body irradiation (TBI) is often a component of the conditioning regimen prior to hematopoietic stem cell transplantation in patients with hematological malignancies. However, total marrow irradiation (TMI) could be an alternative method for reducing radiation therapy-associated toxicity, as it specifically targets the skeleton and thus could better protect organs at risk. Here, we compared dosimetric changes in irradiation received by the target volume and organs at risk between TBI and TMI plans.

MATERIALS AND METHODS

Theoretical TMI plans were calculated for 35 patients with various hematological malignancies who had already received TBI in our clinic. We then statistically compared irradiation doses between the new TMI plans and existing TBI plans. We examined whether TMI provides greater protection of organs at risk while maintaining the prescribed dose in the targeted skeletal area. We also compared beam-on times between TBI and TMI.

RESULTS

TMI planning achieved significant reductions in the mean, minimum, and maximum irradiation doses in the lungs, kidneys, liver, spleen, and body (i.e., remaining tissue except organs and skeleton). In particular, the mean dose was reduced by 49% in the liver and spleen and by 55-59% in the kidneys. Moreover, TMI planning reduced the corpus beam-on time by an average of 217 s.

CONCLUSION

TMI planning achieved significant dose reduction in organs at risk while still achieving the prescribed dose in the target volume. Additionally, TMI planning reduced the beam-on time for corpus plans despite a high modulation factor.

Impact of respiratory motion on lung dose during total marrow irradiation

We evaluated the impact of respiratory motion on the lung dose during linac-based intensity-modulated total marrow irradiation (IMTMI) using two different approaches: (1) measurement of doses within the lungs of an anthropomorphic phantom using thermoluminescent detectors (TLDs) and (2) treatment delivery measurements using ArcCHECK where gamma passing rates (GPRs) and the mean lung doses were calculated and compared with and without motion. In the first approach, respiratory motions were simulated using a programmable motion platform by using typical published peak-to-peak motion amplitudes of 5, 8, and 12 mm in the craniocaudal (CC) direction, denoted here as M1, M2, and M3, respectively, with 2 mm in both anteroposterior (AP) and lateral (LAT) directions. TLDs were placed in five selected locations in the lungs of a RANDO phantom. Average TLD measurements obtained with motion were normalized to those obtained with static phantom delivery. The mean dose ratios were 1.01 (0.98–1.03), 1.04 (1.01–1.09), and 1.08 (1.04–1.12) for respiratory motions M1, M2, and M3, respectively. To determine the impact of directional respiratory motion, we repeated the experiment with 5-, 8-, and 12-mm motion in the CC direction only. The differences in average TLD doses were less than 1% when compared with the M1, M2, and M3 motions indicating a minimal impact from CC motion on lung dose during IMTMI. In the second experimental approach, we evaluated extreme respiratory motion 15 mm excursion in only the CC direction. We placed an ArcCHECK device on a commercial motion platform and delivered the clinical IMTMI plans of five patients. We compared, with and without motion, the dose volume histograms (DVHs) and mean lung dose calculated with the ArcCHECK-3DVH tool as well as GPR with 3%, 5%, and 10% dose agreements and a 3-mm constant distance to agreement (DTA). GPR differed by 11.1 ± 2.1%, 3.8 ± 1.5%, and 0.1 ± 0.2% with dose agreement criteria of 3%, 5%, and 10%, respectively. This indicates that respiratory motion impacts dose distribution in small and isolated parts of the lungs. More importantly, the impact of respiratory motion on the mean lung dose, a critical indicator for toxicity in IMTMI, was not statistically significant (p > 0.05) based on the Student’s t-test. We conclude that most patients treated with IMTMI will have negligible dose uncertainty due to respiratory motion. This is particularly reassuring as lung toxicity is the main concern for future IMTMI dose escalation studies.

Total marrow and lymphoid irradiation as conditioning in haploidentical transplant with posttransplant cyclophosphamide

TMLI at 2000 cGy for HaploHCT with PTCy was determined to be safe in patients with high-risk leukemia and MDS.

At 2000 cGy, a 1-year relapse rate of 17% was achieved without increasing GVHD or transplant-related mortality.

Posttransplant cyclophosphamide (PTCy) platform has shown low rates of graft-versus-host disease (GVHD) and nonrelapse mortality (NRM) after haploidentical hematopoietic cell transplantation (HaploHCT). However, because of the limited disease control, relapse rate remains a major cause of treatment failure in high-risk patients. Total marrow and lymphoid irradiation (TMLI) allows for delivery of high radiation to bone marrow and other targeted structures, without increasing off-target radiation exposure and toxicity to end organs. In this phase 1 trial, 31 patients with high-risk and/or active primary refractory leukemias or myelodysplastic syndrome underwent peripheral blood stem cell HaploHCT with TMLI, fludarabine, and cyclophosphamide as the conditioning regimen. Radiation dose was escalated in increments of 200 cGy (1200-2000 cGy). GVHD prophylaxis was PTCy with tacrolimus/mycophenolate mofetil. Grade 2 toxicities by the Bearman scale were mucositis (n = 1), hepatic (n = 3), gastrointestinal (n = 5), and cardiac (n = 2). One patient (1800 cGy) experienced grade 3 pulmonary toxicity (dose-limiting toxicity). At a follow-up duration of 23.9 months for the whole cohort; 2-year NRM was 13%. Cumulative incidence of day 100 grade 2 to 4 and 3 to 4 acute GVHD was 52% and 6%, respectively. Chronic GVHD at 2 years was 35%. For patients treated with 2000 cGy, with a median follow-up duration of 12.3 months, 1-year relapse/progression, progression-free survival, and overall survival rates were 17%, 74%, and 83%, respectively. In conclusion, HaploHCT-TMLI with PTCy was safe and feasible in our high-risk patient population with promising outcomes.

ESTRO ACROP and SIOPE recommendations for myeloablative Total Body Irradiation in children

BACKGROUND AND PURPOSE

Myeloablative Total Body Irradiation (TBI) is an important modality in conditioning for allogeneic hematopoietic stem cell transplantation (HSCT), especially in children with high-risk acute lymphoblastic leukemia (ALL). TBI practices are heterogeneous and institution-specific. Since TBI is associated with multiple late adverse effects, recommendations may help to standardize practices and improve the outcome versus toxicity ratio for children.

MATERIAL AND METHODS

The European Society for Paediatric Oncology (SIOPE) Radiotherapy TBI Working Group together with ESTRO experts conducted a literature search and evaluation regarding myeloablative TBI techniques and toxicities in children. Findings were discussed in bimonthly virtual meetings and consensus recommendations were established.

RESULTS

Myeloablative TBI in HSCT conditioning is mostly performed for high-risk ALL patients or patients with recurring hematologic malignancies. TBI is discouraged in children <3-4 years old because of increased toxicity risk. Publications regarding TBI are mostly retrospective studies with level III-IV evidence. Preferential TBI dose in children is 12-14.4 Gy in 1.6-2 Gy fractions b.i.d. Dose reduction should be considered for the lungs to <8 Gy, for the kidneys to ≤10 Gy, and for the lenses to <12 Gy, for dose rates ≥6 cGy/min. Highly conformal techniques i.e. TomoTherapy and VMAT TBI or Total Marrow (and/or Lymphoid) Irradiation as implemented in several centers, improve dose homogeneity and organ sparing, and should be evaluated in studies.

CONCLUSIONS

These ESTRO ACROP SIOPE recommendations provide expert consensus for conventional and highly conformal myeloablative TBI in children, as well as a supporting literature overview of TBI techniques and toxicities.

Effect of total body irradiation lung block parameters on lung doses using three-dimensional dosimetry

Purpose

Total body irradiation (TBI) is an integral part of stem cell transplant. However, patients are at risk of treatment‐related toxicities, including radiation pneumonitis. While lung dose is one of the most crucial aspects of TBI dosimetry, currently available data are based on point doses. As volumetric dose distribution could be substantially altered by lung block parameters, we used 3D dosimetry in our treatment planning system to estimate volumetric lung dose and measure the impact of various lung block designs.

Materials and methods

We commissioned a TBI beam model in RayStation that matches the measured tissue‐phantom ratio under our clinical TBI setup. Cerrobend blocks were automatically generated in RayStation on thoracic Computed Tomography (CT) scans from three anonymized patients using the lung, clavicle, spine, and diaphragmatic contours. The margin for block edge was varied to 0, 1, or 2 cm from the superior, lateral, and inferior thoracic borders, with a uniform margin 2.5 cm lateral to the vertebral bodies. The lung dose was calculated and compared with a prescription dose of 1200 cGy in six fractions (three with blocks and three without).

Result

The point dose at midplane under the block and the average lung dose are at the range of 73%–76% and 80%–88% of prescription dose respectively regardless of the block margins. In contrast, the percent lung volume receiving 10 Gy increased by nearly two‐fold, from 31% to 60% over the margins from 0 to 2 cm.

Conclusions

The TPS‐derived 3D lung dose is substantially different from the nominal dose assumed with HVL lung blocks. Point doses under the block are insufficient to accurately gauge the relationship between dose and pneumonitis, and TBI dosimetry could be highly variable between patients and institutions as more descriptive parameters are not included in protocols. Much progress remains to be made to optimize and standardize technical aspects of TBI, and better dosimetry could provide more precise dosimetric predictors for pneumonitis risk.

Impact of lung block shape on cardiac dose for total body irradiation

•

Partial cardiac shielding in TBI is not commonly reported and varies among clinics.

•

We evaluated the effects of cardiac shielding in TBI using 3D beam modeling in a commercial TPS.

•

Partial cardiac shielding can reduce mean heart dose and reduce LAD dose up to 30%.

Evaluating cardiac dose during total body irradiation (TBI) is of increasing interest. A three-dimensional beam model for TBI was commissioned and lung shielding was simulated in a treatment planning system with the cardiac silhouette partially blocked and unblocked. When blocked, the median heart dose decreased by 6% (IQR = 6%) and the median cardiac V12Gy decreased by 27% (IQR = 17%). The median left anterior descending artery dose decreased 20% (IQR = 12%) for blocked cases. Because using partial heart shielding may result in considerable changes in dose to cardiac structures, TBI protocols should explicitly consider lung block design parameters and their potential effects.

Feasibility study of volumetric modulated arc therapy with Halcyon™ linac for total body irradiation

Background

The use of total body irradiation (TBI) with linac-based volumetric modulated arc therapy (VMAT) has been steadily increasing. Helical tomotherapy has been applied in TBI and total marrow irradiation to reduce the dose to critical organs, especially the lungs. However, the methodology of TBI with Halcyon™ linac remains unclear. This study aimed to evaluate whether VMAT with Halcyon™ linac can be clinically used for TBI.

Methods

VMAT planning with Halcyon™ linac was conducted using a whole-body computed tomography data set. The planning target volume (PTV) included the body cropped 3 mm from the source. A dose of 12 Gy in six fractions was prescribed for 50% of the PTV. The organs at risk (OARs) included the lens, lungs, kidneys, and testes.

Results

The PTV D_98%, D_95%, D_50%, and D_2% were 8.9 (74.2%), 10.1 (84.2%), 12.6 (105%), and 14.2 Gy (118%), respectively. The homogeneity index was 0.42. For OARs, the D_mean of the lungs, kidneys, lens, and testes were 9.6, 8.5, 8.9, and 4.4 Gy, respectively. The V_12Gy of the lungs and kidneys were 4.5% and 0%, respectively. The D_max of the testes was 5.8 Gy. Contouring took 1–2 h. Dose calculation and optimization was performed for 3–4 h. Quality assurance (QA) took 2–3 h. The treatment duration was 23 min.

Conclusions

A planning study of TBI with Halcyon™ to set up VMAT-TBI, dosimetric evaluation, and pretreatment QA, was established.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13014-021-01959-3.

Total Body Irradiation in Haematopoietic Stem Cell Transplantation for Paediatric Acute Lymphoblastic Leukaemia: Review of the Literature and Future Directions

Total body irradiation (TBI) has been a pivotal component of the conditioning regimen for allogeneic myeloablative haematopoietic stem cell transplantation (HSCT) in very-high-risk acute lymphoblastic leukaemia (ALL) for decades, especially in children and young adults. The myeloablative conditioning regimen has two aims: (1) to eradicate leukaemic cells, and (2) to prevent rejection of the graft through suppression of the recipient's immune system. Radiotherapy has the advantage of achieving an adequate dose effect in sanctuary sites and in areas with poor blood supply. However, radiotherapy is subject to radiobiological trade-offs between ALL cell destruction, immune and haematopoietic stem cell survival, and various adverse effects in normal tissue. To diminish toxicity, a shift from single-fraction to fractionated TBI has taken place. However, HSCT and TBI are still associated with multiple late sequelae, leaving room for improvement. This review discusses the past developments of TBI and considerations for dose, fractionation and dose-rate, as well as issues regarding TBI setup performance, limitations and possibilities for improvement. TBI is typically delivered using conventional irradiation techniques and centres have locally developed heterogeneous treatment methods and ways to achieve reduced doses in several organs. There are, however, limitations in options to shield organs at risk without compromising the anti-leukaemic and immunosuppressive effects of conventional TBI. Technological improvements in radiotherapy planning and delivery with highly conformal TBI or total marrow irradiation (TMI), and total marrow and lymphoid irradiation (TMLI) have opened the way to investigate the potential reduction of radiotherapy-related toxicities without jeopardising efficacy. The demonstration of the superiority of TBI compared with chemotherapy-only conditioning regimens for event-free and overall survival in the randomised For Omitting Radiation Under Majority age (FORUM) trial in children with high-risk ALL makes exploration of the optimal use of TBI delivery mandatory. Standardisation and comprehensive reporting of conventional TBI techniques as well as cooperation between radiotherapy centres may help to increase the ratio between treatment outcomes and toxicity, and future studies must determine potential added benefit of innovative conformal techniques to ultimately improve quality of life for paediatric ALL patients receiving TBI-conditioned HSCT.

Pulmonary Toxicity After Total Body Irradiation - Critical Review of the Literature and Recommendations for Toxicity Reporting

INTRODUCTION

Total body irradiation is an effective conditioning regimen for allogeneic stem cell transplantation in pediatric and adult patients with high risk or relapsed/refractory leukemia. The most common adverse effect is pulmonary toxicity including idiopathic pneumonia syndrome (IPS). As centers adopt more advanced treatment planning techniques for TBI, total marrow irradiation (TMI), or total marrow and lymphoid irradiation (TMLI) there is a greater need to understand treatment-related risks for IPS for patients treated with conventional TBI. However, definitions of IPS as well as risk factors for IPS remain poorly characterized. In this study, we perform a critical review to further evaluate the literature describing pulmonary outcomes after TBI.

MATERIALS AND METHODS

A search of publications from 1960-2020 was undertaken in PubMed, Embase, and Cochrane Library. Search terms included "total body irradiation", "whole body radiation", "radiation pneumonias", "interstitial pneumonia", and "bone marrow transplantation". Demographic and treatment-related data was abstracted and evidence quality supporting risk factors for pulmonary toxicity was evaluated.

RESULTS

Of an initial 119,686 publications, 118 met inclusion criteria. Forty-six (39%) studies included a definition for pulmonary toxicity. A grading scale was provided in 20 studies (17%). In 42% of studies the lungs were shielded to a set mean dose of 800cGy. Fourteen (12%) reported toxicity outcomes by patient age. Reported pulmonary toxicity ranged from 0-71% of patients treated with TBI, and IPS ranged from 1-60%. The most common risk factors for IPS were receipt of a TBI containing regimen, increasing dose rate, and lack of pulmonary shielding. Four studies found an increasing risk of pulmonary toxicity with increasing age.

CONCLUSIONS

Definitions of IPS as well as demographic and treatment-related risk factors remain poorly characterized in the literature. We recommend routine adoption of the diagnostic workup and the definition of IPS proposed by the American Thoracic Society. Additional study is required to determine differences in clinical and treatment-related risk between pediatric and adult patients. Further study using 3D treatment planning is warranted to enhance dosimetric precision and correlation of dose volume histograms with toxicities.

Practice patterns of pediatric total body irradiation techniques: A Children's Oncology Group survey

PURPOSE

The aim of this study was to examine current practice patterns in pediatric total body irradiation (TBI) techniques among xxx member institutions.

METHODS AND MATERIALS

Between Nov 2019 and Feb 2020 a questionnaire, containing 52 questions related to the technical aspects of TBI was sent to medical physicists at 152 xxx institutions. The questions were designed to obtain technical information on commonly used TBI treatment techniques. Another set of 9 questions related to the clinical management of patients undergoing TBI was sent to 152 xxx member radiation oncologists at the same institutions.

RESULTS

Twelve institutions were excluded because TBI was not performed in their institutions. A total of 88 physicists from 88 institutions (63% response rate) and 96 radiation oncologists from 96 institutions responded (69% response rate). The AP/PA technique was the most common (49 institutions - 56%); 44 institutions (50%) used the lateral technique and 14 institutions (16%) used volumetric modulated arc therapy (VMAT)/Tomotherapy. Mid-plane dose rates of 6-15 cGy/min were most commonly used. The most common specification for lung dose was the mid lung dose for both AP/PA (71%) and lateral (63%) techniques. All physician responders agreed with the need to refine current TBI techniques and 79% supported the investigation of new TBI techniques to further lower the lung dose.

CONCLUSION

There is no consistency in the practice patterns, methods for dose measurement and reporting of TBI doses among xxx institutions. The lack of a standardization precludes meaningful correlation between TBI doses and clinical outcomes including disease control and normal tissue toxicity. The xxx radiation oncology discipline is currently undertaking several steps to standardize the practice and dose reporting of pediatric TBI using detailed questionnaires and phantom-based credentialing for all xxx centers.

Total Body Irradiation for Hematopoietic Stem Cell Transplantation: What Can We Agree on?

Total body irradiation (TBI), used as part of the conditioning regimen prior to allogeneic and autologous hematopoietic cell transplantation, is the delivery of a relatively homogeneous dose of radiation to the entire body. TBI has a dual role, being cytotoxic and immunosuppressive. This allows it to eliminate disease and create “space” in the marrow while also impairing the immune system from rejecting the foreign donor cells being transplanted. Advantages that TBI may have over chemotherapy alone are that it may achieve greater tumour cytotoxicity and better tissue penetration than chemotherapy as its delivery is independent of vascular supply and physiologic barriers such as renal and hepatic function. Therefore, the so-called “sanctuary” sites such as the central nervous system (CNS), testes, and orbits or other sites with limited blood supply are not off-limits to radiation. Nevertheless, TBI is hampered by challenging logistics of administration, coordination between hematology and radiation oncology departments, increased rates of acute treatment-related morbidity and mortality along with late toxicity to other tissues. Newer technologies and a better understanding of the biology and physics of TBI has allowed the field to develop novel delivery systems which may help to deliver radiation more safely while maintaining its efficacy. However, continued research and collaboration are needed to determine the best approaches for the use of TBI in the future.

Comparison of different TBI techniques in terms of dose homogeneity - review study

Total body irradiation (TBI) is a kind of external beam radiotherapy, used in conjunction with chemotherapy with the purpose of immunosuppression. Since the target in TBI is the whole body, so achieving uniform dose distribution throughout the entire body during TBI is necessary. As recommended by AAPM dose variation must be within ±10% of the prescription dose. With the evidences from literature there is limited substantiation to consider a treatment method better than others, but with regard to the size of the treatment room, workload of the radiotherapy department and prevalent technology used within each treatment department it is recommended to make the suitable and optimum method in each department. In this work, a review study was performed on different TBI techniques with the purpose of assessment and comparison of dose distribution homogeneity in these methods.

A dosimetric evaluation of a novel technique using abutted radiation fields for myeloablative total body irradiation

Background:

The present study reports myeloablative total body irradiation (TBI) on an isocentrically mounted linac by laying the patient on the floor and management of abutting radiation fields and partial shielding of lungs. Dosimetrical efficacy of this novel technique was evaluated.

Materials and methods:

In this retrospective study, dosimetrical parameters from TBI plans on whole-body CT scans of 46 patients were analysed. The prescribed dose to TBI was 12 Gy in six fractions delivered over a period of 3 days for myeloablative conditioning. TrueBeam STx platform Linac (Varian Medical Systems Inc., Palo Alto, CA, USA) was used to deliver opposing fields. Radiation fields were abutted to form a single large field using an arithmetic formula at source-to-skin-distance of 210 cm.

Results:

Discrepancies in dose calculated by treatment planning system were within 1·6% accuracy, and dose profile at the junction of abutting radiation fields was reproduced within 3·0% accuracy. The real treatment time for each patient was ~30 minutes/fraction. Monitor unit was weighted for multiple sub-fields to achieve dose homogeneity within 5·0% throughout the whole body, and the mean dose to lung was ≤10 Gy.

Conclusion:

Our abutting radiation field technique for myeloablative TBI is feasible in any existing linac bunker. ‘Island-blocking’ is feasible in this technique using multi-leaf collimator. This technique is cost-effective as it does not require any costly equipment than the readily available equipment in any radiotherapy facility. In general, TBI requires laborious planning procedures and spacious linac bunkers; this novel technique has the potential to change previously held notions.

TLI in pediatric patients

PURPOSE

Hematopoietic progenitor cell transplantation (HSCT) is a procedure used in different hematological diseases as part of the curative treatment, so the investigators propose a system of conditioning of reduced intensity based on total lymphoid irradiation (TLI) as an alternative to the classic total body irradiation (TBI) followed by haploidentical transplantation in patients compatible with a single HLA haplotype, as an alternative to patients who do not have an HLA compatible donor.

MATERIALS AND METHODS

A cohort of 25 patients with hematological disease underwent haploidentical HSCT from February 2015 to May 2018, conditioned with TLI from day - 10 (2-4 days of treatment) followed by thiotepa (5 mg/kg/12 h) and melphalan (70 mg/m²/day) prior to HSCT and prophylaxis with ciclosporin (1.5 mg/kg/12 h). 2 Gy/fraction was administered to complete 8 Gy with IMRT and VMAT technique.

RESULTS

12% rejection of the transplant was obtained with acute GVHD < II (48%) and chronic GVHD 12%. No acute toxicity was recorded in irradiated patients and 56% survival of patients at the end of follow-up.

CONCLUSION

Conditioning the haploidentical transplant with TLI, IMRT, and VMAT techniques compared with TBI and RT3D-C techniques is a feasible technique that helps inducing the necessary immunosuppression in patients with a high risk of graft rejection, minimal adverse effects, low incidence of GVHD, and high survival rate.

Multi-institutional evaluation of MVCT guided patient registration and dosimetric precision in total marrow irradiation: A global health initiative by the international consortium of total marrow irradiation

PURPOSE

Total marrow irradiation (TMI) is a highly conformal treatment of the human skeleton structure requiring a high degree of precision and accuracy for treatment delivery. Although many centers worldwide initiated clinical studies using TMI, currently there is no standard for pretreatment patient setup. To this end, the accuracy of different patient setups was measured using pretreatment imaging. Their impact on dose delivery was assessed for multiple institutions.

METHODS AND MATERIALS

Whole body imaging (WBI) or partial body imaging (PBI) was performed using pretreatment megavoltage computed tomography (MVCT) in a helical Tomotherapy machine. Rigid registration of MVCT and planning kilovoltage computed tomography images were performed to measure setup error and its effect on dose distribution. The entire skeleton was considered the planning target volume (PTV) with five sub regions: head/neck (HN), spine, shoulder and clavicle (SC), and one avoidance structure, the lungs. Sixty-eight total patients (>300 images) across six institutions were analyzed.

RESULTS

Patient setup techniques differed between centers, creating variations in dose delivery. Registration accuracy varied by anatomical region and by imaging technique, with the lowest to the highest degree of pretreatment rigid shifts in the following order: spine, pelvis, HN, SC, and lungs. Mean fractional dose was affected in regions of high registration mismatch, in particular the lungs.

CONCLUSIONS

MVCT imaging and whole body patient immobilization was essential for assessing treatment setup, allowing for the complete analysis of 3D dose distribution in the PTV and lungs (or avoidance structures).

Extended SSD VMAT treatment for total body irradiation

In this work, we develop a total body irradiation technique that utilizes arc delivery, a buildup spoiler, and inverse optimized multileaf collimator (MLC) motion to shield organs at risk. The current treatment beam model is verified to confirm its applicability at extended source‐to‐surface distance (SSD). The delivery involves 7–8 volumetric modulated arc therapy arcs delivered to the patient in the supine and prone positions. The patient is positioned at a 90° couch angle on a custom bed with a 1 cm acrylic spoiler to increase surface dose. Single‐step optimization using a patient CT scan provides enhanced dose homogeneity and limits organ at risk dose. Dosimetric data of 109 TBI patients treated with this technique is presented along with the clinical workflow. Treatment planning system (TPS) verification measurements were performed at an extended SSD of 175 cm. Measurements included: a 4‐point absolute depth‐dose curve, profiles at 1.5, 5, and 10 cm depth, absolute point‐dose measurements of an treatment field, 2D Gafchromic^® films at four locations, and measurements of surface dose at multiple locations of a Alderson phantom. The results of the patient DVH parameters were: Body‐5 mm D98 95.3 ± 1.5%, Body‐5 mm D2 114.0 ± 3.6%, MLD 102.8 ± 2.1%. Differences between measured and calculated absolute depth‐dose values were all <2%. Profiles at extended SSD had a maximum point difference of 1.3%. Gamma pass rates of 2D films were greater than 90% at 5%/1 mm. Surface dose measurements with film confirmed surface dose values of >90% of the prescription dose. In conclusion, the inverse optimized delivery method presented in the paper has been used to deliver homogenous dose to over 100 patients. The method provides superior patient comfort utilizing a commercial TPS. In addition, the ability to easily shield organs at risk is available through the use of MLCs.

Total body irradiation in allogeneic bone marrow transplantation conditioning regimens: A review

Hematologic malignancies may require, at one point during their treatment, allogeneic bone marrow transplantation. Total body irradiation combined with chemotherapy or radiomimetic used in allogeneic bone marrow transplantation is known to be very toxic. Total body irradiation (TBI) induces immunosuppression to prevent the rejection of donor marrow. TBI is also used to eradicate malignant cells and is in sanctuary organs that are not reached by chemotherapy drugs. TBI has evolved since its introduction in the late fifties, but acute and late toxicities remain. Helical tomotherapy, which is widely used for some solid tumors, is a path for the improvement of outcomes and toxicities in TBI because of its sparing capacities. In this article, we first review the practical aspects of TBI with patient positioning, radiobiological considerations and total dose and fractionation prescriptions. Second, we review the use of intensity modulated radiation therapy in bone marrow transplantation with a focus on helical tomotherapy TBI, helical tomotherapy total marrow irradiation (TMI) and total marrow and lymphoid irradiation (TMLI) and their dosimetric and clinical outcomes. Finally, we review the perspective of dose escalation and the extension to older patients and patients with comorbidity who do not benefit from a standard bone marrow transplantation conditioning regimen.

A depth-sensing technique on 3D-printed compensator for total body irradiation patient measurement and treatment planning

PURPOSE

The purpose of total body irradiation (TBI) techniques is to deliver a uniform radiation dose to the entire volume of a patient's body. Due to variations in the thickness of the patient, it is difficult to produce such a uniform dose distribution throughout the body. In many techniques, a compensator is used to adjust the dose delivered to various sections of the patient. The current study aims to develop and validate an innovative method of using depth-sensing cameras and 3D printing techniques for TBI treatment planning and compensator fabrication.

METHODS

A tablet with an integrated depth-sensing camera and motion tracking sensors was used to scan a RANDO™ phantom positioned in a TBI treatment booth to detect and store the 3D surface in a point cloud format. The accuracy of the detected surface was evaluated by comparing extracted body thickness measurements with corresponding measurements from computed tomography (CT) scan images. The thickness, source to surface distance, and off-axis distance of the phantom at different body section were measured for TBI treatment planning. A detailed compensator design was calculated to achieve a uniform dose distribution throughout the phantom. The compensator was fabricated using a 3D printer, silicone molding, and a mixture of wax and tungsten powder. In vivo dosimetry measurements were performed using optically stimulated luminescent detectors.

RESULTS

The scan of the phantom took approximately 30 s. The mean error for thickness measurements at each section of phantom relative to CT was 0.48 ± 0.27 cm. The average fabrication error for the 3D-printed compensator was 0.16 ± 0.15 mm. In vivo measurements for an end-to-end test showed that overall dose differences were within 5%.

CONCLUSIONS

A technique for planning and fabricating a compensator for TBI treatment using a depth camera equipped tablet and a 3D printer was demonstrated to be sufficiently accurate to be considered for further investigation.

Going the distance: validation of Acuros and AAA at an extended SSD of 400 cm

Accurate dose calculation and treatment delivery is essential for total body irradiation (TBI). In an effort to verify the accuracy of TBI dose calculation at our institution, we evaluated both the Varian Eclipse AAA and Acuros algorithms to predict dose distributions at an extended source‐to‐surface distance (SSD) of 400 cm. Measurements were compared to calculated values for a 6 MV beam in physical and virtual phantoms at 400 cm SSD using open beams for both 5×5 and 40×40 cm2 field sizes. Inline and crossline profiles were acquired at equivalent depths of 5 cm, 10 cm, and 20 cm. Depth‐dose curves were acquired using EBT2 film and an ion chamber for both field sizes. Finally, a RANDO phantom was used to simulate an actual TBI treatment. At this extended SSD, care must be taken using the planning system as there is good relative agreement between measured and calculated profiles for both algorithms, but there are deviations in terms of the absolute dose. Acuros has better agreement than AAA in the penumbra region.

PACS number(s): 87.55.kd

TBI lung dose comparisons using bilateral and anteroposterior delivery techniques and tissue density corrections

This study compares lung dose distributions for two common techniques of total body photon irradiation (TBI) at extended source‐to‐surface distance calculated with, and without, tissue density correction (TDC). Lung dose correction factors as a function of lateral thorax separation are approximated for bilateral opposed TBI (supine), similar to those published for anteroposterior–posteroanterior (AP–PA) techniques in AAPM Report 17 (i.e., Task Group 29). 3D treatment plans were created retrospectively for 24 patients treated with bilateral TBI, and for whom CT data had been acquired from the head to the lower leg. These plans included bilateral opposed and AP–PA techniques—each with and without — TDC, using source‐to‐axis distance of 377 cm and largest possible field size. On average, bilateral TBI requires 40% more monitor units than AP–PA TBI due to increased separation (26% more for 23 MV). Calculation of midline thorax dose without TDC leads to dose underestimation of 17% on average (standard deviation, 4%) for bilateral 6 MV TBI, and 11% on average (standard deviation, 3%) for 23 MV. Lung dose correction factors (CF) are calculated as the ratio of midlung dose (with TDC) to midline thorax dose (without TDC). Bilateral CF generally increases with patient separation, though with high variability due to individual uniqueness of anatomy. Bilateral CF are 5% (standard deviation, 4%) higher than the same corrections calculated for AP–PA TBI in the 6 MV case, and 4% higher (standard deviation, 2%) for 23 MV. The maximum lung dose is much higher with bilateral TBI (up to 40% higher than prescribed, depending on patient anatomy) due to the absence of arm tissue blocking the anterior chest. Dose calculations for bilateral TBI without TDC are incorrect by up to 24% in the thorax for 6 MV and up to 16% for 23 MV. Bilateral lung CF may be calculated as 1.05 times the values published in Table 6 of AAPM Report 17, though a larger patient pool is necessary to better quantify this trend. Bolus or customized shielding will reduce lung maximum dose in the anterior thorax.

PACS numbers: 87.55.D, 87.55.Dk, 87.55.Ne, 87.56.Bd, 87.57.Qp

In vivo dosimetry for total body irradiation: five-year results and technique comparison

The aim of this work is to establish if the new CT‐based total body irradiation (TBI) planning techniques used at University College London Hospital (UCLH) and Royal Free Hospital (RFH) are comparable to the previous technique at the Middlesex Hospital (MXH) by analyzing predicted and measured diode results. TBI aims to deliver a homogeneous dose to the entire body, typically using extended SSD fields with beam modulation to limit doses to organs at risk. In vivo dosimetry is used to verify the accuracy of delivered doses. In 2005, when the Middlesex Hospital was decommissioned and merged with UCLH, both UCLH and the RFH introduced updated CT‐planned TBI techniques, based on the old MXH technique. More CT slices and in vivo measurement points were used by both; UCLH introduced a beam modulation technique using MLC segments, while RFH updated to a combination of lead compensators and bolus. Semiconductor diodes were used to measure entrance and exit doses in several anatomical locations along the entire body. Diode results from both centers for over five years of treatments were analyzed and compared to the previous MXH technique for accuracy and precision of delivered doses. The most stable location was the field center with standard deviations of 4.1% (MXH), 3.7% (UCLH), and 1.7% (RFH). The least stable position was the ankles. Mean variation with fraction number was within 1.5% for all three techniques. In vivo dosimetry can be used to verify complex modulated CT‐planned TBI, and demonstrate improvements and limitations in techniques. The results show that the new UCLH technique is no worse than the previous MXH one and comparable to the current RFH technique.

PACS numbers: 87.55.Qr, 87.56.N‐

Total body irradiation with step translation and dynamic field matching

The purpose of this study is to develop a total body irradiation technique that does not require additional devices or sophisticated processes to overcome the space limitation of a small treatment room. The technique aims to deliver a uniform dose to the entire body while keeping the lung dose within the tolerance level. The technique treats the patient lying on the floor anteriorly and posteriorly. For each AP/PA treatment, two complementary fields with dynamic field edges are matched over an overlapped region defined by the marks on the body surface. A compensator, a spoiler, and lung shielding blocks were used during the treatment. Moreover, electron beams were used to further boost the chest wall around the lungs. The technique was validated in a RANDO phantom using GAFCHROMIC films. Dose ratios at different body sites along the midline ranged from 0.945 to 1.076. The dose variation in the AP direction ranged from 96.0% to 104.6%. The dose distribution in the overlapped region ranged from 98.5% to 102.8%. Lateral dose profiles at abdomen and head revealed 109.8% and 111.7% high doses, respectively, at the body edges. The results confirmed that the technique is capable of delivering a uniform dose distribution to the midline of the body in a small treatment room while keeping the lung dose within the tolerance level.

Inverse-planned modulated-arc total-body irradiation

PURPOSE

To develop a simple and robust method for inverse-planned total-body irradiation (TBI) that is more comfortable and has better dose homogeneity than the conventional forward-planned techniques and that can be delivered in a standard-sized treatment vault.

METHODS

Modulated-arc TBI (MATBI) utilizes an arc of static open-field beams to irradiate patients as they lay on a stationary couch beneath the gantry, with cerrobend blocks suspended over organs at risk to provide shielding. Prior to treatment, full-body computed tomography (CT) images are acquired of each patient and imported into the PINNACLE(3) planning system, which modulates the monitor units for the open-field beams to optimize the body dose uniformity. The volume of the body within 10% of the prescription dose, V(±10), is used as a metric to evaluate the dose uniformity. For comparison to MATBI, the dose distribution of a conventional forward-planned treatment is also calculated. Quality assurance measurements are acquired before treatment by delivering the plans to a phantom and during treatment with an ionization chamber inside a buildup block, placed between the patient's ankles.

RESULTS

For MATBI, the achieved values of V(±10) were 75.8%, 90.2%, 84.6%, and 79.8% compared to 60.3%, 77.4%, 65.6%, and 68.5% for the conventional TBI technique, respectively. The pretreatment ion chamber measurements in the phantom had an average error of 1.2%. Those acquired during treatment had larger errors, with most points being within 3% of predictions.

CONCLUSIONS

MATBI provides better dose uniformity and comfort than the conventional forward-planned TBI techniques. In addition, the technique can be implemented on most linacs, in standard-sized vaults, without the use of a translating couch.

Feasibility study of a novel rotational and translational method for linac-based intensity modulated total marrow irradiation

Conventional TBI is primarily limited by the toxicity to organs at risk because of impossibility of sparing critical organs. The purpose of this study is to investigate the feasibility of a novel rotational and translational IMRT method (RTM) which able to conform the radiation dose to target organs and reduce critical organ dose for TMI using linac. To assess the feasibility, we investigated the planning and delivery of total marrow irradiation (TMI) using this method. The treatment plannig study showed that target coverage was achieved with 90% of the target volume receiving 100% of the prescription dose. Doses to critical structures indicated that a 1.28- to 2.35-fold reduction in median dose is achieved with total-marrow RTM compared with conventional TBI. Delivery of Rando phantom and TLD measurement demonstrated an accurate dose delivery (ranged from -6% to 7%) to the target and critical organs. Results from this study suggests that RTM can be accurately delivered and reduce irradiation to all critical organs with good target coverage.

Implementation of a lateral total body irradiation technique with 6 MV photons: The University of Texas Health Science Center in San Antonio experience

Purpose: Total body irradiation (TBI) involves delivery of marrow-ablative or suppressive dose to the entirety of the marrow habitus. In its current practice, TBI often involves positioning the patient in an uncomfortable upright body position for extended periods of time while delivering radiation dose via anteroposterior/posterioanterior (AP/PA) fields. In an effort to maximize reproducibility and patient comfort, especially for paediatric patients, a supine lateral total body irradiation (LTBI) protocol was implemented as preparatory regimen for bone marrow transplant.

Methods and Materials: One hundred and forty-five patient charts were reviewed. Patients were treated in supine position with hands clasped over the upper abdomen in a comfortable position. They were placed in a methylcrylate body box and irradiated with opposed lateral fields at extended distance of 350 cm to the midplane of the patient. Each field delivered 100 cGy with a midplane dose of 200 cGy per fraction. Dose regimes varied from 200 to 1,200 cGy total doses. Custom lead compensating filters were utilized. A 6 MV photon beam produced by a Varian Clinac 600c linear accelerator was applied. In vivo thermoluminescent dosimeter (TLD) readings were taken for anatomical regions of interest (ROI). TLDs were placed in each ROI under a 1.5-cm-thick bolus for maximum dose build-up.

Results and Conclusion: The resulting data demonstrate a dosimetric variability of anatomical ROI from reference prescription dose of less than 3%. LTBI has been used for more than ten years in our institution and produced favourable results for more than 100 patients. We suggest this LTBI approach to facilitate successful treatment of children who require TBI while maintaining dose uniformity as recommended by the American Association of Physicists in Medicine Report 17.

Validation of the Eclipse AAA algorithm at extended SSD

The accuracy of dose calculations at extended SSD is of significant importance in the dosimetric planning of total body irradiation (TBI). In a first step toward the implementation of electronic, multi-leaf collimator compensation for dose inhomogeneities and surface contour in TBI, we have evaluated the ability of the Eclipse AAA to accurately predict dose distributions in water at extended SSD. For this purpose, we use the Eclipse AAA algorithm, commissioned with machine-specific beam data for a 6 MV photon beam, at standard SSD (100 cm). The model was then used for dose distribution calculations at extended SSD (179.5 cm). Two sets of measurements were acquired for a 6 MV beam (from a Varian linear accelerator) in a water tank at extended SSD: i) open beam for 5 x 5, 10 x 10, 20 x 20 and 40 x 40 cm2 field sizes (defined at 179.5 cm SSD), and ii) identical field sizes but with a 1.3 cm thick acrylic spoiler placed 10 cm above the water surface. Dose profiles were acquired at 5 cm, 10 cm and 20 cm depths. Dose distributions for the two setups were calculated using the AAA algorithm in Eclipse. Confidence limits for comparisons between measured and calculated absolute depth dose curves and normalized dose profiles were determined as suggested by Venselaar et al. The confidence limits were within 2% and 2 mm for both setups. Extended SSD calculations were also performed using Eclipse AAA, commissioned with Varian Golden beam data at standard SSD. No significant difference between the custom commissioned and Golden Eclipse AAA was observed. In conclusion, Eclipse AAA commissioned at standard SSD can be used to accurately predict dose distributions in water at extended SSD for 6 MV open beams.

Dosimetry and verification of Co total body irradiation with human phantom and semiconductor diodes

Total Body Irradiation (TBI) is a form of radiotherapy used for patients prior to bone marrow or stem cell transplant to destroy any undetectable cancer cells. The dosimetry characteristics of a ⁶⁰Co unit for TBI were studied and a simple method for the calculation of the prescribed dose for TBI is presented. Dose homogeneity was verified in a human phantom. Dose measurements were made in water phantom (30 × 30 × 30 cm³), using farmer ionization chamber (0.6 cc, TM30010, PTW) and a parallel plate ionization chamber (TM23343, PTW). Point dose measurements for AP/PA irradiation were measured in a human phantom using silicon diodes (T60010L, PTW). The lung dose was measured with an ionization chamber (0.3 cc, TM31013). The validity of the proposed algorithm was checked at TBI distance using the human phantom. The accuracy of the proposed algorithm was within 3.5%. The dose delivered to the mid-lobe of the lung was 14.14 Gy and it has been reduced to 8.16 Gy by applying the proper shield. Dose homogeneity was within ±7% for all measured points. The results indicate that a good agreement between the total prescribed and calculated midplane doses can be achieved using this method. Therefore, it could be possible to use calculated data for TBI treatments.

Feasibility study of helical tomotherapy for total body or total marrow irradiationa)

Total body radiation (TBI) has been used for many years as a preconditioning agent before bone marrow transplantation. Many side effects still plague its use. We investigated the planning and delivery of total body irradiation (TBI) and selective total marrow irradiation (TMI) and a reduced radiation dose to sensitive structures using image-guided helical tomotherapy. To assess the feasibility of using helical tomotherapy, (A) we studied variations in pitch, field width, and modulation factor on total body and total marrow helical tomotherapy treatments. We varied these parameters to provide a uniform dose along with a treatment times similar to conventional TBI (15-30 min). (B) We also investigated limited (head, chest, and pelvis) megavoltage CT (MVCT) scanning for the dimensional pretreatment setup verification rather than total body MVCT scanning to shorten the overall treatment time per treatment fraction. (C) We placed thermoluminescent detectors (TLDs) inside a Rando phantom to measure the dose at seven anatomical sites, including the lungs. A simulated TBI treatment showed homogeneous dose coverage (+/-10%) to the whole body. Doses to the sensitive organs were reduced by 35%-70% of the target dose. TLD measurements on Rando showed an accurate dose delivery (+/-7%) to the target and critical organs. In the TMI study, the dose was delivered conformally to the bone marrow only. The TBI and TMI treatment delivery time was reduced (by 50%) by increasing the field width from 2.5 to 5.0 cm in the inferior-superior direction. A limited MVCT reduced the target localization time 60% compared to whole body MVCT. MVCT image-guided helical tomotherapy offers a novel method to deliver a precise, homogeneous radiation dose to the whole body target while reducing the dose significantly to all critical organs. A judicious selection of pitch, modulation factor, and field size is required to produce a homogeneous dose distribution along with an acceptable treatment time. In addition, conformal radiation to the bone marrow appears feasible in an external radiation treatment using image-guided helical tomotherapy.