Cloning and characterization of dnaA(Cs), a mutation which leads to overinitiation of DNA replication in Escherichia coli K-12

The linker domain of the initiator DnaA contributes to its ATP binding and membrane association in E. coli chromosomal replication

DnaA, the initiator of Escherichia coli chromosomal replication, has in its adenosine triphosphatase (ATPase) domain residues required for adenosine 5'-triphosphate (ATP) binding and membrane attachment. Here, we show that D118Q substitution in the DnaA linker domain, a domain known to be without major regulatory functions, influences ATP binding of DnaA and replication initiation in vivo. Although initiation defective by itself, overexpression of DnaA(D118Q) caused overinitiation of replication in dnaA46ts cells and prevented cell growth. The growth defect was rescued by overexpressing the initiation inhibitor, SeqA, indicating that the growth inhibition resulted from overinitiation. Small deletions within the linker showed another unexpected phenotype: cellular growth without requiring normal levels of anionic membrane lipids, a property found in DnaA mutated in its ATPase domain. The deleted proteins were defective in association with anionic membrane vesicles. These results show that changes in the linker domain can alter DnaA functions similarly to the previously shown changes in the ATPase domain.

Single-molecule studies of helicases and translocases in prokaryotic genome-maintenance pathways

Helicases involved in genomic maintenance are a class of nucleic-acid dependent ATPases that convert the energy of ATP hydrolysis into physical work to execute irreversible steps in DNA replication, repair, and recombination. Prokaryotic helicases provide simple models to understand broadly conserved molecular mechanisms involved in manipulating nucleic acids during genome maintenance. Our understanding of the catalytic properties, mechanisms of regulation, and roles of prokaryotic helicases in DNA metabolism has been assembled through a combination of genetic, biochemical, and structural methods, further refined by single-molecule approaches. Together, these investigations have constructed a framework for understanding the mechanisms that maintain genomic integrity in cells. This review discusses recent single-molecule insights into molecular mechanisms of prokaryotic helicases and translocases.

The E. coli DNA Replication Fork

DNA replication in Escherichia coli initiates at oriC, the origin of replication and proceeds bidirectionally, resulting in two replication forks that travel in opposite directions from the origin. Here, we focus on events at the replication fork. The replication machinery (or replisome), first assembled on both forks at oriC, contains the DnaB helicase for strand separation, and the DNA polymerase III holoenzyme (Pol III HE) for DNA synthesis. DnaB interacts transiently with the DnaG primase for RNA priming on both strands. The Pol III HE is made up of three subassemblies: (i) the αɛθ core polymerase complex that is present in two (or three) copies to simultaneously copy both DNA strands, (ii) the β2 sliding clamp that interacts with the core polymerase to ensure its processivity, and (iii) the seven-subunit clamp loader complex that loads β2 onto primer-template junctions and interacts with the α polymerase subunit of the core and the DnaB helicase to organize the two (or three) core polymerases. Here, we review the structures of the enzymatic components of replisomes, and the protein-protein and protein-DNA interactions that ensure they remain intact while undergoing substantial dynamic changes as they function to copy both the leading and lagging strands simultaneously during coordinated replication.

Molecular Dissection of the Essential Features of the Origin of Replication of the Second Vibrio cholerae Chromosome

Vibrionaceae family members are interesting models for studying DNA replication initiation, as they contain two circular chromosomes. Chromosome II (chrII) replication is governed by two evolutionarily unique yet highly conserved elements, the origin DNA sequence oriCII and the initiator protein RctB. The minimum functional region of oriCII, oriCII-min, contains multiple elements that are bound by RctB in vitro, but little is known about the specific requirements for individual elements during oriCII initiation. We utilized undirected and site-specific mutagenesis to investigate the functionality of mutant forms of oriCII-min and assessed binding to various mutant forms by RctB. Our analyses showed that deletions, point mutations, and changes in RctB target site spacing or methylation all impaired oriCII-min-based replication. RctB displayed a reduced affinity for most of the low-efficacy origins tested, although its characteristic cooperative binding was generally maintained. Mutations that removed or altered the relative positions of origin components other than RctB binding sites (e.g., AT-rich sequence, DnaA target site) also abolished replicative capacity. Comprehensive mutagenesis and deep-sequencing-based screening (OriSeq) allowed the identification of a previously uncharacterized methylated domain in oriCII that is required for origin function. Together, our results reveal the remarkable evolutionary honing of oriCII and provide new insight into the complex interplay between RctB and oriCII.

The genome of the enteric pathogen Vibrio cholerae consists of two chromosomes. While the chromosome I replication origin and its cognate replication initiator protein resemble those of Escherichia coli, the factors responsible for chromosome II replication initiation display no similarity to any other known initiation systems. Here, to enhance our understanding of how this DNA sequence, oriCII, and its initiator protein, RctB, function, we used both targeted mutagenesis and a new random-mutagenesis approach (OriSeq) to finely map the oriCII structural features and sequences required for RctB-mediated DNA replication. Collectively, our findings reveal the extraordinary evolutionary honing of the architecture and motifs that constitute oriCII and reveal a new role for methylation in oriCII-based replication. Finally, our findings suggest that the OriSeq approach is likely to be widely applicable for defining critical bases in cis-acting sequences.

Mutant DnaAs of Escherichia coli that are refractory to negative control

DnaA is the initiator of DNA replication in bacteria. A mutant DnaA named DnaAcos is unusual because it is refractory to negative regulation. We developed a genetic method to isolate other mutant DnaAs that circumvent regulation to extend our understanding of mechanisms that control replication initiation. Like DnaAcos, one mutant bearing a tyrosine substitution for histidine 202 (H202Y) withstands the regulation exerted by datA, hda and dnaN (β clamp), and both DnaAcos and H202Y resist inhibition by the Hda-β clamp complex in vitro. Other mutant DnaAs carrying G79D, E244K, V303M or E445K substitutions are either only partially sensitive or refractory to inhibition by the Hda-β clamp complex in vitro but are responsive to hda expression in vivo. All mutant DnaAs remain able to interact directly with Hda. Of interest, both DnaAcos and DnaAE244K bind more avidly to Hda. These mutants, by sequestrating Hda, may limit its availability to regulate other DnaA molecules, which remain active to induce extra rounds of DNA replication. Other evidence suggests that a mutant bearing a V292M substitution hyperinitiates by escaping the effect of an unknown regulatory factor. Together, our results provide new insight into the mechanisms that regulate replication initiation in Escherichia coli.

DnaAcos hyperinitiates by circumventing regulatory pathways that control the frequency of initiation in Escherichia coli

Mutants of dnaAcos are inviable at 30 degrees C because DnaAcos hyperinitiates, leading to new replication forks that apparently collide from behind with stalled forks, thereby generating lethal double-strand breaks. By comparison, an elevated level of DnaA also induces extra initiations, but lethality occurs only in strains defective in repairing double-strand breaks. To explore the model that the chromosomal level of DnaAcos, or the increased abundance of DnaA, increases initiation frequency by, escaping or overcoming pathways that control initiation, respectively, we developed a genetic selection and identified seqA, datA, dnaN and hda, which function in pathways that either act at oriC or modulate DnaA activity. To assess each pathway's relative effectiveness, we used genetically inactivated strains, and quantified initiation frequency after elevating the level of DnaA. The results indicate that the hda-dependent pathway has a stronger effect on initiation than pathways involving seqA and datA. Testing the model that DnaAcos overinitiates because it fails to respond to one or more regulatory mechanisms, we show that dnaAcos is unresponsive to hda and dnaN, which encodes the beta clamp, and also datA, a locus proposed to titer excess DnaA. These results explain how DnaAcos hyperinitiates to interfere with viability.

Synchronous replication initiation in novel Mycobacterium tuberculosis dnaA cold-sensitive mutants

The genetic aspects of oriC replication initiation in Mycobacterium tuberculosis are largely unknown. A two-step genetic screen was utilized for isolating M. tuberculosis dnaA cold-sensitive (cos) mutants. First, a resident plasmid expressing functional dnaA integrated at the attB locus in dnaA null background was exchanged with an incoming plasmid bearing a mutagenized dnaA gene. Next, the mutants that were defective for growth at 30 degrees C, a non-permissive temperature, but resumed growth and DNA synthesis when shifted to 37 degrees C, a permissive temperature, were subsequently selected. Nucleotide sequencing analysis located mutations to different regions of the dnaA gene. Modulation of the growth temperatures led to synchronized DNA synthesis. The dnaA expression under synchronized DNA replication conditions continued to increase during the replication period, but decreased thereafter reflecting autoregulation. The dnaAcos mutants at 30 degrees C were elongated suggesting that they may possibly be blocked during the cell division. The DnaA115 protein is defective in its ability to interact with ATP at 30 degrees C, but not at 37 degrees C. Our results suggest that the optimal cell cycle progression and replication initiation in M. tuberculosis requires that the dnaA promoter remains active during the replication period and that the DnaA protein is able to interact with ATP.

A novel class of mutations that affect DNA replication in E. coli

Over-initiation of DNA replication in cells containing the cold-sensitive dnaA(cos) allele has been shown to lead to extensive DNA damage, potentially due to head-to-tail replication fork collisions that ultimately lead to replication fork collapse, growth stasis and/or cell death. Based on the assumption that suppressors of the cold-sensitive phenotype of the cos mutant should include mutations that affect the efficiency and/or regulation of DNA replication, we subjected a dnaA(cos) mutant strain to transposon mutagenesis and selected mutant derivatives that could form colonies at 30 degrees C. Four suppressors of the dnaA(cos)-mediated cold sensitivity were identified and further characterized. Based on origin to terminus ratios, chromosome content per cell, measured by flow cytometry, and sensitivity to the replication fork inhibitor hydroxyurea, the suppressors fell into two distinct categories: those that directly inhibit over-initiation of DNA replication and those that act independently of initiation. Mutations that decrease the cellular level of HolC, the chi subunit of DNA polymerase, or loss of ndk (nucleoside diphosphate kinase) function fall into the latter category. We propose that these novel suppressor mutations function by decreasing the efficiency of replication fork movement in vivo, either by decreasing the dynamic exchange of DNA polymerase subunits in the case of HolC, or by altering the balance between DNA replication and deoxynucleoside triphosphate synthesis in the case of ndk. Additionally, our results indicate a direct correlation between over-initiation and sensitivity to replication fork inhibition by hydroxyurea, supporting a model of increased head-to-tail replication fork collisions due to over-initiation.

Hyperinitiation of DNA replication in Escherichia coli leads to replication fork collapse and inviability

Elevated dnaA expression from a multicopy plasmid induces more frequent initiation from the Escherichia coli replication origin, oriC, but viability is maintained. In comparison, chromosomally encoded dnaAcos also stimulates initiation, but this is lethal. By quantitative methods, we show that the level of initiation induced by elevated dnaA expression leads to collapsed replication forks that are mostly within 10 map units of oriC. Because forks collapse randomly, nucleoprotein complexes at specific sites such as datA are not the cause. When replication restart is blocked by a mutation in recB or priA, the increased initiations via elevated dnaA expression causes inviability. The amount of collapsed forks is substantially higher under elevated expression of dnaAcos compared to that of dnaA. We propose that the lethal phenotype of chromosomally encoded dnaAcos is a result of hyperinitiation that overwhelms the repair capacity of the cell.

Suppression of temperature-sensitive chromosome replication of an Escherichia coli dnaX(Ts) mutant by reduction of initiation efficiency

Temperature sensitivity of DNA polymerization and growth of a dnaX(Ts) mutant is suppressible at 39 to 40 degrees C by mutations in the initiator gene, dnaA. These suppressor mutations concomitantly cause initiation inhibition at 20 degrees C and have been designated Cs,Sx to indicate both phenotypic characteristics of cold-sensitive initiation and suppression of dnaX(Ts). One dnaA(Cs,Sx) mutant, A213D, has reduced affinity for ATP, and two mutants, R432L and T435K, have eliminated detectable DnaA box binding in vitro. Two models have explained dnaA(Cs,Sx) suppression of dnaX, which codes for both the tau and gamma subunits of DNA polymerase III. The initiation deficiency model assumes that reducing initiation efficiency allows survival of the dnaX(Ts) mutant at the somewhat intermediate temperature of 39 to 40 degrees C by reducing chromosome content per cell, thus allowing partially active DNA polymerase III to complete replication of enough chromosomes for the organism to survive. The stabilization model is based on the idea that DnaA interacts, directly or indirectly, with polymerization factors during replication. We present five lines of evidence consistent with the initiation deficiency model. First, a dnaA(Cs,Sx) mutation reduced initiation frequency and chromosome content (measured by flow cytometry) and origin/terminus ratios (measured by real-time PCR) in both wild-type and dnaX(Ts) strains growing at 39 and 34 degrees C. These effects were shown to result specifically from the Cs,Sx mutations, because the dnaX(Ts) mutant is not defective in initiation. Second, reduction of the number of origins and chromosome content per cell was common to all three known suppressor mutations. Third, growing the dnaA(Cs,Sx) dnaX(Ts) strain on glycerol-containing medium reduced its chromosome content to one per cell and eliminated suppression at 39 degrees C, as would be expected if the combination of poor carbon source, the Cs,Sx mutation, the Ts mutation, and the 39 degrees C incubation reduced replication to the point that growth (and, therefore, suppression) was not possible. However, suppression was possible on glycerol medium at 38 degrees C. Fourth, the dnaX(Ts) mutation can be suppressed also by introduction of oriC mutations, which reduced initiation efficiency and chromosome number per cell, and the degree of suppression was proportional to the level of initiation defect. Fifth, introducing a dnaA(Cos) allele, which causes overinitiation, into the dnaX(Ts) mutant exacerbated its temperature sensitivity.

The DnaAcos allele of Escherichia coli: hyperactive initiation is caused by substitution of A184V and Y271H, resulting in defective ATP binding and aberrant DNA replication control

Chromosomal DNA replication is regulated at the level of commitment to this biochemical pathway. In Escherichia coli, DnaA protein appears to regulate this process. A mutant form, DnaAcos, carrying four amino acid substitutions, is apparently defective in responding to regulatory signals, because it induces hyperactive initiation from the bacterial replication origin (oriC). In this report, the phenotype of hyperactive initiation is shown to be the result of two specific amino acid substitutions. One (A184V) immediately adjacent to a Walker A box (P loop motif) causes a defect in ATP binding (Carr and Kaguni, 1996, Mol Microbiol 20: 1307-1318). The second amino acid substitution (Y271H) appears to stabilize the activity of the mutant protein carrying the A184V substitution. The mutant protein carrying both amino acid substitutions (A184V + Y271H) is defective in modulating the frequency of initiation from oriC, as demonstrated by marker frequency analysis of oriC and a locus near the replication terminus. These results indicate that a defect in ATP binding results in aberrant control of DNA replication.

The bacterial replication initiator DnaA. DnaA and oriC, the bacterial mode to initiate DNA replication

The initiation of replication is the central event in the bacterial cell cycle. Cells control the rate of DNA synthesis by modulating the frequency with which new chains are initiated, like all macromolecular synthesis. The end of the replication cycle provides a checkpoint that must be executed for cell division to occur. This review summarizes recent insight into the biochemistry, genetics and control of the initiation of replication in bacteria, and the central role of the initiator protein DnaA.

The structure of bacterial DnaA: implications for general mechanisms underlying DNA replication initiation

The initiation of DNA replication is a key event in the cell cycle of all organisms. In bacteria, replication initiation occurs at specific origin sequences that are recognized and processed by an oligomeric complex of the initiator protein DnaA. We have determined the structure of the conserved core of the Aquifex aeolicus DnaA protein to 2.7 A resolution. The protein comprises an AAA+ nucleotide-binding fold linked through a long, helical connector to an all-helical DNA-binding domain. The structure serves as a template for understanding the physical consequences of a variety of DnaA mutations, and conserved motifs in the protein suggest how two critical aspects of origin processing, DNA binding and homo-oligomerization, are mediated. The spatial arrangement of these motifs in DnaA is similar to that of the eukaryotic-like archaeal replication initiation factor Cdc6/Orc1, demonstrating that mechanistic elements of origin processing may be conserved across bacterial, archaeal and eukaryotic domains of life.

Two types of cold sensitivity associated with the A184-->V change in the DnaA protein

Multicopy dnaA(Ts) strains carrying the dnaA5 or dnaA46 allele are high-temperature resistant but are cold sensitive for colony formation. The DnaA5 and DnaA46 proteins both have an A184-->V change in the ATP binding motif of the protein, but they also have one additional mutation. The mutations were separated, and it was found that a plasmid carrying exclusively the A184-->V mutation conferred a phenotype virtually identical to that of the dnaA5 plasmid. Strains carrying plasmids with either of the additional mutations behaved like a strain carrying the dnaA+ plasmid. In temperature downshifts from 42 degrees C to 30 degrees C, chromosome replication was stimulated in the multicopy dnaA46 strain. The DNA per mass ratio increased threefold, and exponential growth was maintained for more than four mass doublings. Strains carrying plasmids with the dnaA(A184-->V) or the dnaA5 gene behaved differently. The temperature downshift resulted in run out of DNA synthesis and the strains eventually ceased growth. The arrest of DNA synthesis was not due to the inability to initiate chromosome replication because marker frequency analysis showed high initiation activity after temperature downshift. However, the marker frequencies indicated that most, if not all, of the newly initiated replication forks were stalled soon after the onset of chromosome replication. Thus, it appears that the multicopy dnaA(A184-->V) strains are cold sensitive because of an inability to elongate replication at low temperature. The multicopy dnaA46 strains, on the contrary, exhibit productive initiation and normal fork movement. In this case, the cold-sensitive phenotype may be due to DNA overproduction.

Novel alleles of the Escherichia coli dnaA gene

The Escherichia coli dnaA gene is required for replication of the bacterial chromosome. To identify residues critical for its replication activity, a method to select novel mutations was developed that relied on lytic growth of lambda from an inserted pSC101 replication origin. Replication from the lambda origin was inhibited by lysogen-encoded cI repressor. Replication from the pSC101 origin that resulted in lytic growth was dependent on active DnaA protein encoded by a plasmid in a host strain lacking the chromosomal dnaA gene. With this approach, a large collection of missense, nonsense, and a few internal deletion mutations were obtained. Nucleotide sequence analysis of the missense mutations indicated that 28 of 50 were unique. Of these, one was identical to the dnaA205 allele whereas the remainder are novel. These missense mutations were clustered into three regions, suggesting three functional domains of DnaA protein required for its replication activity. Many of the missense mutations mapping to the C-terminal 61 residues were inactive for replication from the pSC101 origin. These are defective in DNA binding. Mutations that mapped elsewhere were temperature-sensitive.

Conformational transition of DnaA protein by ATP: structural analysis of DnaA protein, the initiator of Escherichia coli chromosome replication

DnaA protein binds to the chromosomal origin (oriC) to initiate DNA replication. We developed an efficient system for purification of DnaA protein which will facilitate physicochemical analysis of the protein. The yield of DnaA protein was increased at least 6-fold compared to an available method being used, and over 22 mg of the protein were obtained from only 100 g of cells. DnaA protein purified by this procedure showed an indistinguishable affinity for ATP, and activity for in vitro replication of oriC plasmid. The process of denaturation of DnaA protein, which was blocked by ATP, was monitored by intrinsic fluorescence and circular dichroism. Analysis of circular dichroism revealed that DnaA protein is rich in alpha-helices, and that ATP-binding leads to a significant transition of protein conformation in that the content of alpha-helices is decreased. This is the first evidence indicating that ATP-binding profoundly affects conformation of DnaA protein.

The nucleoid protein H-NS facilitates chromosome DNA replication in Escherichia coli dnaA mutants

Growth inhibition of the dnaA(Cs) mutant, which overinitiates chromosome replication, was shown to be dependent upon the nucleoid protein H-NS. [3H]thymine incorporation experiments indicated that the absence of H-NS inhibited overreplication by the dnaA(Cs) mutant. In addition, the temperature-sensitive phenotype of a dnaA46 mutant was enhanced by disruption of H-NS. These observations suggest that H-NS directly or indirectly facilitates the initiation of chromosome replication.

Novel alleles of the Escherichia coli dnaA gene are defective in replication of pSC101 but not of oriC

Five novel alleles of the Escherichia coli dnaA gene that were temperature sensitive in maintenance of pSC101, a plasmid that is dependent on this gene for replication, were isolated. Nucleotide sequence analysis revealed that four of the five alleles arose from single base substitutions, whereas the fifth contained three base substitutions, two of which were silent. Whereas all five alleles were temperature sensitive in vivo for pSC101 maintenance, genetic and biochemical characterization indicated that only two were defective in replication from the chromosomal origin, oriC. As previously characterized mutations are defective in replication for both pSC101 and oriC, the dnaA mutations specifically defective in pSC101 maintenance represent a novel class. We speculate that one or more of these pSC101-specific mutants are defective in interaction with pSC101 RepA protein, which is also required for initiation of plasmid DNA replication.

SeqA limits DnaA activity in replication from oriC in Escherichia coli

A mutant Escherichia coli that transforms minichromosomes with high efficiency in the absence of Dam methylation has been isolated and the mutation mapped to 16.25 min on the E. coli map. The mutant strain containing seqA2 is defective for growth in rich medium but not in minimal medium. A similar mutation in this gene, named seqA1, has also been isolated. Here we show that the product of the seqA gene, SeqA, normally acts as an inhibitor of chromosomal initiation. In the seqA2-containing mutant, the frequency of initiation increases by a factor of three. Introduction of the wild-type seqA gene on a low-copy plasmid suppresses the cold sensitivity of a dnaAcos mutant known to overinitiate at temperatures below 39 degrees C. In addition, the seqA2 mutation is a suppressor of several dnaA (Ts) alleles. The seqA2 mutant overinitiates replication from oriC and displays the asynchronous initiation phenotype. Also the seqA2 mutant has an elevated level of DnaA protein (twofold). The introduction of minichromosomes or a low-copy-number plasmid carrying five DnaA-boxes from the oriC region increases the growth rate of the seqA2 mutant in rich medium to the wild-type level, reduces overinitiation but does not restore synchrony. We propose that the role of SeqA is to limit the activity level of the E. coli regulator of chromosome initiation, DnaA.

Cloning and nucleotide sequence determination of twelve mutant dnaA genes of Escherichia coli

Plasmids carrying different regions of the wild-type dnaA gene were used for marker rescue analysis of the temperature sensitivity of twelve strains carrying dnaA mutations. The different dnaA(Ts) mutations could be unambiguously located within specific regions of the dnaA gene. The mutant dnaA genes were cloned on pBR322-derived plasmids and on nucleotide sequencing by dideoxy chain termination the respective mutations were determined using M13 clones carrying the relevant parts of the mutant dnaA gene. Several of the mutant dnaA genes were found to have two mutations. The dnaA5, dnaA46, dnaA601, dnaA602, dnaA604, and dnaA606 genes all had identical mutations corresponding to an amino acid change from alanine to valine at amino acid 184 in the DnaA protein, close to the proposed ATP binding site, but all carried one further mutation giving rise to an amino acid substitution. The dnaA508 gene also had two mutations, whereas dnaA167, dnaA203, dnaA204, dnaA205, and dnaA211 each had only one. The pairs dnaA601/602, dnaA604/606, and dnaA203/204 were each found to have identical mutations. Plasmids carrying the different dnaA mutant genes intact were introduced into the respective dnaA mutant strains. Surprisingly, these homopolyploid mutant strains were found to be temperature resistant in most cases, indicating that a high intracellular concentration of the mutant DnaA protein can compensate for the decreased activity of the protein.

Control of cyclic chromosome replication in Escherichia coli

The biochemical basis for cyclic initiation of bacterial chromosome replication is reviewed to define the processes involved and to focus on the putative oscillator mechanism which generates the replication clock. The properties required for a functional oscillator are defined, and their implications are discussed. We show that positive control models, but not negative ones, can explain cyclic initiation. In particular, the widely accepted idea that DnaA protein controls the timing of initiation is examined in detail. Our analysis indicates that DnaA protein is not involved in the oscillator mechanism. We conclude that the generations of a single leading to cyclic initiation is separate from the initiation process itself and propose a heuristic model to focus attention on possible oscillator mechanisms.

The nature of an intragenic suppressor of the Escherichia coli dnaA508 temperature-sensitive mutation

Escherichia coli strain E508 (dnaA508) is temperature-sensitive for dnaA function. A mutant with an intragenic suppressor of the dnaA508 mutation, called PR1, has been isolated. The suppressor mutation(s) allow initiation of DNA synthesis at 42 degrees C and, like dnaA cold-sensitive mutants, PR1 grows poorly at 32 degrees C. Two-dimensional gel analysis indicates that DnaA protein is overproduced in PR1. Transcriptional analysis indicates two to three times the number of dnaA and dnaN transcripts in PR1, as compared to a wild-type dnaA+ strain. The dnaA gene from PR1 has been cloned and found to complement the original dnaA508 mutation, as well as dnaA46, but not dnaA5. Sequencing of the dnaAPR1 gene reveals three separate base changes, two of which result in nonconservative amino acid substitutions and the third is a change in the start codon from GTG to ATG.

Functions of the DnaA protein of Escherichia coli in replication and transcription

The function of DnaA protein as a replisome organizer in the initiation of DNA replication is reviewed. A model is presented showing the construction of two basic types of DnaA-dependent replication origin. New data demonstrate that the dnaA box-DnaA protein complex is a transcription terminator. Only one orientation of the dnaA box results in termination of transcription. Mutation of the dnaA box within the dnaA reading frame shows that DnaA-mediated transcription termination has a role in the autoregulation of the dnaA gene.