Cloning, nucleotide sequence, and expression in Escherichia coli of the gene for poly(3-hydroxybutyrate) depolymerase from Alcaligenes faecalis

Characterization of Ralstonia insidiosa C1 isolated from Alpine regions: Capability in polyhydroxyalkanoates degradation and production

This study ventures into the exploration of potential poly-3-hydroxybutyrate (PHB) degradation in alpine environments. PHB-degrading bacteria were identified in both campus soil, representing a residential area, and Mt. Kurodake soil, an alpine region in Hokkaido, Japan. Next-generation sequencing analysis indicated that the campus soil exhibited higher microbial diversity, while Ralstonia insidiosa C1, isolated from Mt. Kurodake soil, displayed the highest proficiency in PHB degradation. R. insidiosa C1 efficiently degraded up to 3% (w/v) of PHB and various films composed of other biopolymers at 14 °C. This bacterium synthesized homopolymers using substrates such as 3-hydroxybutyric acid, sugars, and acetic acid, while also produced copolymers using a mixture of fatty acids. The analysis results confirmed that the biopolymer synthesized by strain C1 using glucose was PHB, with physical properties comparable to commercial products. The unique capabilities of R. insidiosa C1, encompassing both the production and degradation of bioplastics, highlight its potential to establish a novel material circulation model.

Cell Surface Display of Poly(3-hydroxybutyrate) Depolymerase and its Application

We have expressed extracellular poly(3-hydroxybutyrate) (PHB) depolymerase of Ralstonia pickettii T1 on the Escherichia coli surface using Pseudomonas OprF protein as a fusion partner by C-terminal deletion-fusion strategy. Surface display of depolymerase was confirmed by flow cytometry, immunofluorescence microscopy and whole cell hydrolase activity. For the application, depolymerase was used as an immobilized catalyst of enantioselective hydrolysis reaction for the first time. After 48 h, (R)-methyl mandelate was completely hydrolyzed, and (S)-mandelic acid was produced with over 99% enantiomeric excess. Our findings suggest that surface displayed depolymerase on E. coli can be used as an enantioselective biocatalyst.

Streamlined production, purification, and characterization of recombinant extracellular polyhydroxybutyrate depolymerases

Heterologous production of extracellular polyhydroxybutyrate (PHB) depolymerases (PhaZs) has been of interest for over 30 years, but implementation is sometimes difficult and can limit the scope of research. With the constant development of tools to improve recombinant protein production in Escherichia coli, we propose a method that takes characteristics of PhaZs from different bacterial strains into account. Recombinant His‐tagged versions of PhaZs (rPhaZ) from Comamonas testosteroni 31A, Cupriavidus sp. T1, Marinobacter algicola DG893, Pseudomonas stutzeri, and Ralstonia sp. were successfully produced with varying expression, solubility, and purity levels. PhaZs from C. testosteroni and P. stutzeri were more amenable to heterologous expression in all aspects; however, using the E. coli Rosetta‐gami B(DE3) expression strain and establishing optimal conditions for expression and purification (variation of IPTG concentration and use of size exclusion columns) helped circumvent low expression and purity for the other PhaZs. Degradation activity of the rPhaZs was compared using a simple PHB plate‐based method, adapted to test for various pH and temperatures. rPhaZ from M. algicola presented the highest activity at 15°C, and rPhaZs from Cupriavidus sp. T1 and Ralstonia sp. had the highest activity at pH 5.4. The methods proposed herein can be used to test the production of soluble recombinant PhaZs and to perform preliminary evaluation for applications that require PHB degradation.

Crystal Structure and Substrate Specificity Modification of Acetyl Xylan Esterase from Aspergillus luchuensis

Acetyl xylan esterase (AXE) catalyzes the hydrolysis of the acetyl bonds present in plant cell wall polysaccharides. Here, we determined the crystal structure of AXE from Aspergillus luchuensis (AlAXEA), providing the three-dimensional structure of an enzyme in the Esterase_phb family. AlAXEA shares its core α/β-hydrolase fold structure with esterases in other families, but it has an extended central β-sheet at both its ends and an extra loop. Structural comparison with a ferulic acid esterase (FAE) from Aspergillus niger indicated that AlAXEA has a conserved catalytic machinery: a catalytic triad (Ser119, His259, and Asp202) and an oxyanion hole (Cys40 and Ser120). Near the catalytic triad of AlAXEA, two aromatic residues (Tyr39 and Trp160) form small pockets at both sides. Homology models of fungal FAEs in the same Esterase_phb family have wide pockets at the corresponding sites because they have residues with smaller side chains (Pro, Ser, and Gly). Mutants with site-directed mutations at Tyr39 showed a substrate specificity similar to that of the wild-type enzyme, whereas those with mutations at Trp160 acquired an expanded substrate specificity. Interestingly, the Trp160 mutants acquired weak but significant type B-like FAE activity. Moreover, the engineered enzymes exhibited ferulic acid-releasing activity from wheat arabinoxylan.IMPORTANCE Hemicelluloses in the plant cell wall are often decorated by acetyl and ferulic acid groups. Therefore, complete and efficient degradation of plant polysaccharides requires the enzymes for cleaving the side chains of the polymer. Since the Esterase_phb family contains a wide array of fungal FAEs and AXEs from fungi and bacteria, our study will provide a structural basis for the molecular mechanism of these industrially relevant enzymes in biopolymer degradation. The structure of the Esterase_phb family also provides information for bacterial polyhydroxyalkanoate depolymerases that are involved in biodegradation of thermoplastic polymers.

Generation of poly-β-hydroxybutyrate from acetate in higher plants: Detection of acetoacetyl CoA reductase- and PHB synthase- activities in rice

It has been reported that Poly-β-hydroxybutyrate (PHB) is generated from acetate in the rice root. However, no information is available about the biosynthetic pathway of PHB from acetate in plant cells. In the bacterium Ralstonia eutropha H16 (R. eutropha), PHB is synthesized from acetyl CoA by the consecutive reaction of three enzymes: β-ketothiolase (EC: 2.3.1.9), acetoacetyl CoA reductase (EC: 1.1.1.36) and PHB synthase (EC: 2.3.1.-). Thus, in this study, we examined whether the above three enzymatic activities were also detected in rice seedlings. The results clearly showed that the activities of the above three enzymes were all detected in rice. In particular, the PHB synthase activity was detected specifically in the sonicated particulate fractions (2000g 10min precipitate (ppt) and the 8000g 30min ppt) of rice roots and leaves. In addition to these enzyme activities, several new experimental results were obtained on PHB synthesis in higher plants: (a) (14)C-PHB generated from 2-(14)C-acetate was mainly localized in the 2000g 10min ppt and the 8000g 30min ppt of rice root. (b) Addition of acetate (0.1-10mM) to culture medium of rice seedlings did not increase the content of PHB in the rice root or leaf. (c) In addition to C3 plants, PHB was generated from acetate in a C4 plant (corn) and in a CAM plant (Bryophyllum pinnatum). d) Washing with ethylenediaminetetraacetic acid (EDTA) strongly suggested that the PHB synthesized from acetate was of plant origin and was not bacterial contamination.

Extracellular Polyhydroxyalkanoate Depolymerase by Acidovorax sp. DP5

Bacteria capable of degrading polyhydroxyalkanoates (PHA) by secreting extracellular depolymerase enzymes were isolated from water and soil samples collected from various environments in Malaysia. A total of 8 potential degraders exhibited clear zones on poly(3-hydroxybutyrate) [P(3HB)] based agar, indicating the presence of extracellular PHA depolymerase. Among the isolates, DP5 exhibited the largest clearing zone with a degradation index of 6.0. The highest degradation activity of P(3HB) was also observed with depolymerase enzyme of DP5 in mineral salt medium containing P(3HB). Based on biochemical characterization and 16S rRNA cloning and sequencing, isolate DP5 was found to belong to the genus Acidovorax and subsequently named as Acidovorax sp. DP5. The highest extracellular depolymerase enzyme activity was achieved when 0.25% (w/v) of P(3HB) and 1 g/L of urea were used as carbon and nitrogen source, respectively, in the culture media. The most suitable assay condition of the depolymerase enzyme in response to pH and temperature was tested. The depolymerase produced by strain Acidovorax sp. DP5 showed high percentage of degradation with P(3HB) films in an alkaline condition with pH 9 and at a temperature of 40°C.

Transcriptional repression of the poly(3-hydroxybutyrate) depolymerase in Ralstonia pickettii T1 by a tetR-like gene

Ralstonia pickettii T1 secretes a poly(3-hydroxybutyrate) (PHB) depolymerase (PhaZ) and a 3-hydroxybutyrate (3HB)-oligomer hydrolase, and extracellularly degrades PHB to produce 3HB. However, it is not clear how the expression of phaZ is regulated. In this study, the mechanism by which phaZ expression is controlled in R. pickettii T1 was examined using a mutant made by the random insertion of a transposon, Tn5. The mutant produced a larger amount of PhaZ than the wild type in nutrient broth or a minimal salt (SM) medium supplemented with succinate. However, there was essentially no difference in the activity or amount of PhaZ in the culture supernatant between the wild type and mutant when the two were grown on 3HB. The gene disrupted by the insertion of Tn5 (epdR) was cloned and its nucleotide sequence was determined. In a BLAST search, epdR showed a high degree of similarity to genes for TetR transcriptional regulators of several bacteria. The introduction of epdR into the wild type and mutant grown on the three media described above decreased the amount of PhaZ. These results indicated EpdR to be involved in the repression of phaZ in R. pickettii T1. A quantitative RT-PCR analysis indicated that mRNA levels corresponded with the activity detected and the amounts of PhaZ in the wild type and mutant. Furthermore, the amount of epdR transcript was inversely proportional to the amount of phaZ transcript. In addition, the existence of a positive element acting on phaZ expression was suggested, because in the mutant lacking EpdR, the amount of phaZ transcript varied in cells grown in SM-3HB, SM-succinate or nutrient broth. Based on the above results, a model for the regulation of PhaZ expression in R. pickettii T1 is proposed.

Pyrosequencing reveals the key microorganisms involved in sludge alkaline fermentation for efficient short-chain fatty acids production

Short-chain fatty acids (SCFAs) have been regarded as the excellent carbon source of wastewater biological nutrient removal, and sludge alkaline (pH 10) fermentation has been reported to achieve highly efficient SCFAs production. In this study, the underlying mechanisms for the improved SCFAs production at pH 10 were investigated by using 454 pyrosequencing and fluorescent in situ hybridization (FISH) to analyze the microbial community structures in sludge fermentation reactors. It was found that sludge fermentation at pH 10 increased the abundances of Pseudomonas sp. and Alcaligenes sp., which were able to excrete extracellular proteases and depolymerases, and thus enhanced the hydrolysis of insoluble sludge protein and polyhydroxyalkanoates (PHA). Meanwhile, the abundance of acid-producing bacteria (such as Clostridium sp.) in the reactor of pH 10 was also higher than that of uncontrolled pH, which benefited the acidification of soluble organic substrates. Further study indicated that sludge fermentation at pH 10 significantly decreased the number of methanogenic archaea, resulting in lower SCFAs consumption and lower methane production. Therefore, anaerobic sludge fermentation under alkaline conditions increased the abundances of bacteria involved in sludge hydrolysis and acidification, and decreased the abundance of methanogenic archaea, which favored the competition of bacteria over methanogens and resulted in the efficient production of SCFAs.

The structure of PhaZ7 at atomic (1.2 A) resolution reveals details of the active site and suggests a substrate-binding mode

Poly-(R)-hydroxyalkanoates (PHAs) are bacterial polyesters that are degraded by a group of enzymes known as PHA depolymerases. Paucimonas lemoignei PhaZ7 depolymerase is the only extracellular depolymerase that has been described as being active towards amorphous PHAs. A previously determined crystal structure of PhaZ7 revealed an alpha/beta-hydrolase fold and a Ser-His-Asp catalytic triad. In order to address questions regarding the catalytic mechanism and substrate binding, the atomic resolution structure of PhaZ7 was determined after cocrystallization with the protease inhibitor PMSF. The reported structure has the highest resolution (1.2 A) of currently known depolymerase structures and shows a sulfur dioxide molecule covalently attached to the active-site residue Ser136. Structural comparison with the free PhaZ7 structure (1.45 A resolution) revealed no major changes in the active site, suggesting a preformed catalytic triad. The oxyanion hole was found to be formed by the amide groups of Met137 and Asn49. Nine well ordered water molecules were located in the active site. Manual docking of a substrate trimer showed that the positions of these water molecules coincide well with the substrate atoms. It is proposed that these water molecules are displaced upon binding of the substrate. Furthermore, conformational changes were identified after comparison with a previously determined PhaZ7 dimer structure in a different space group. The changes were located in surface loops involved in dimer formation, indicating some flexibility of these loops and their possible involvement in polyester binding.

Bacterial polyhydroxyalkanoates

Polyhydroxyalkanoates (PHAs) are polyesters of hydroxyalkanoates (HAs) synthesized by numerous bacteria as intracellular carbon and energy storage compounds and accumulated as granules in the cytoplasm of cells. More than 80 HAs have been detected as constituents of PHAs, which allows these thermoplastic materials to have various mechanical properties resembling hard crystalline polymer or elastic rubber depending on the incorporated monomer units. Even though PHAs have been recognized as good candidates for biodegradable plastics, their high price compared with conventional plastics has limited their use in a wide range of applications. A number of bacteria including Alcaligenes eutrophus, Alcaligenes latus, Azotobacter vinelandii, methylotrophs, pseudomonads, and recombinant Escherichia coli have been employed for the production of PHAs, and the productivity of greater than 2 g PHA/L/h has been achieved. Recent advances in understanding metabolism, molecular biology, and genetics of the PHA-synthesizing bacteria and cloning of more than 20 different PHA biosynthesis genes allowed construction of various recombinant strains that were able to synthesize polyesters having different monomer units and/or to accumulate much more polymers. Also, genetically engineered plants harboring the bacterial PHA biosynthesis genes are being developed for the economical production of PHAs. Improvements in fermentation/separation technology and the development of bacterial strains or plants that more efficiently synthesize PHAs will bring the costs down to make PHAs competitive with the conventional plastics.

The PHA Depolymerase Engineering Database: A systematic analysis tool for the diverse family of polyhydroxyalkanoate (PHA) depolymerases

Background

Polyhydroxyalkanoates (PHAs) can be degraded by many microorganisms using intra- or extracellular PHA depolymerases. PHA depolymerases are very diverse in sequence and substrate specificity, but share a common α/β-hydrolase fold and a catalytic triad, which is also found in other α/β-hydrolases.

Results

The PHA Depolymerase Engineering Database (DED, ) has been established as a tool for systematic analysis of this enzyme family. The DED contains sequence entries of 587 PHA depolymerases, which were assigned to 8 superfamilies and 38 homologous families based on their sequence similarity. For each family, multiple sequence alignments and profile hidden Markov models are provided, and functionally relevant residues are annotated.

Conclusion

The DED is a valuable tool which can be applied to identify new PHA depolymerase sequences from complete genomes in silico, to classify PHA depolymerases, to predict their biochemical properties, and to design enzyme variants with improved properties.

Effects of mutations in the substrate-binding domain of poly[(R)-3-hydroxybutyrate] (PHB) depolymerase from Ralstonia pickettii T1 on PHB degradation

Poly[(R)-3-hydroxybutyrate] (PHB) depolymerase from Ralstonia pickettii T1 (PhaZ(RpiT1)) adsorbs to denatured PHB (dPHB) via its substrate-binding domain (SBD) to enhance dPHB degradation. To evaluate the amino acid residues participating in dPHB adsorption, PhaZ(RpiT1) was subjected to a high-throughput screening system consisting of PCR-mediated random mutagenesis targeted to the SBD gene and a plate assay to estimate the effects of mutations in the SBD on dPHB degradation by PhaZ(RpiT1). Genetic analysis of the isolated mutants with lowered activity showed that Ser, Tyr, Val, Ala, and Leu residues in the SBD were replaced by other residues at high frequency. Some of the mutant enzymes, which contained the residues replaced at high frequency, were applied to assays of dPHB degradation and adsorption, revealing that those residues are essential for full activity of both dPHB degradation and adsorption. These results suggested that PhaZ(RpiT1) adsorbs on the surface of dPHB not only via hydrogen bonds between hydroxyl groups of Ser in the enzyme and carbonyl groups in the PHB polymer but also via hydrophobic interaction between hydrophobic residues in the enzyme and methyl groups in the PHB polymer. The L441H enzyme, which displayed lower dPHB degradation and adsorption abilities, was purified and applied to a dPHB degradation assay to compare it with the wild-type enzyme. The kinetic analysis of the dPHB degradation suggested that lowering the affinity of the SBD towards dPHB causes a decrease in the dPHB degradation rate without the loss of its hydrolytic activity for the polymer chain.

Adsorption of biopolyester depolymerase on silicon wafer and poly[(R)-3-hydroxybutyric acid] single crystal revealed by real-time AFM

The adsorption behavior of PHB depolymerase from R. pickettii T1 on a silicon wafer and on P(3HB) single crystals has been studied by real-time and AFM in air and a buffer solution. First, the morphology of PHB depolymerase adsorbed on a silicon wafer was characterized to show that one molecule of PHB depolymerase has dimensions of 2.2 +/- 0.7 nm height and 16 +/- 5 nm width. The observation of PHB depolymerase adsorbed on a P(3HB) single crystal indicated that the dimensions of enzyme on the crystalline surface in air were 1.2 +/- 0.5 nm high and 28 +/- 7 nm wide, while enzyme molecules with dimensions of 2.1 +/- 0.6 nm height and 16 +/- 7 nm width were detected in a buffer solution. Comparison of the dimensions of PHB depolymerase in air with those in a buffer solution showed that the enzyme was squashed in air, but not in a buffer solution. In addition, the influence of enzymatic adsorption on the molecular state of the P(3HB) crystalline surface was investigated. The AFM images of P(3HB) single crystals after enzymatic adsorption and washing with ethanol indicated that the adhesion of PHB depolymerase changed the molecular state and generated holes on the crystalline surface.

Interaction between poly[(R)-3-hydroxybutyrate] depolymerase and biodegradable polyesters evaluated by atomic force microscopy

Adsorption of PHB depolymerase from Ralstonia pickettii T1 to biodegradable polyesters such as poly[(R)-3-hydroxybutyrate] (PHB) and poly(l-lactic acid) (PLLA) was investigated by atomic force microscopy (AFM). The substrate-binding domain (SBD) with histidines within the N-terminus was prepared and immobilized on the AFM tip surface via a self-assembled monolayer with a nitrilotriacetic acid group. Using the functionalized AFM tips, the force-distance measurements for polyesters were carried out at room temperature in a buffer solution. In the case of AFM tips with immobilized SBD and their interaction with polyesters, multiple pull-off events were frequently recognized in the retraction curves. The single rupture force was estimated at approximately 100 pN for both PLLA and PHB. The multiple pull-off events were recognized even in the presence of a surfactant, which will prevent nonspecific interactions, but reduced when using polyethylene instead of polyesters as a substrate. The present results provide that the PHB depolymerase adsorbs specifically to the surfaces of polyesters and that the single unbinding event evaluated here is mainly associated with the interaction between one molecule of SBD and the polymer surface.

Properties of a novel intracellular poly(3-hydroxybutyrate) depolymerase with high specific activity (PhaZd) in Wautersia eutropha H16

A novel intracellular poly(3-hydroxybutyrate) (PHB) depolymerase (PhaZd) of Wautersia eutropha (formerly Ralstonia eutropha) H16 which shows similarity with the catalytic domain of the extracellular PHB depolymerase in Ralstonia pickettii T1 was identified. The positions of the catalytic triad (Ser190-Asp266-His330) and oxyanion hole (His108) in the amino acid sequence of PhaZd deduced from the nucleotide sequence roughly accorded with those of the extracellular PHB depolymerase of R. pickettii T1, but a signal peptide, a linker domain, and a substrate binding domain were missing. The PhaZd gene was cloned and the gene product was purified from Escherichia coli. The specific activity of PhaZd toward artificial amorphous PHB granules was significantly greater than that of other known intracellular PHB depolymerase or 3-hydroxybutyrate (3HB) oligomer hydrolases of W. eutropha H16. The enzyme degraded artificial amorphous PHB granules and mainly released various 3-hydroxybutyrate oligomers. PhaZd distributed nearly equally between PHB inclusion bodies and the cytosolic fraction. The amount of PHB was greater in phaZd deletion mutant cells than the wild-type cells under various culture conditions. These results indicate that PhaZd is a novel intracellular PHB depolymerase which participates in the mobilization of PHB in W. eutropha H16 along with other PHB depolymerases.

Enzymatic degradation processes of lamellar crystals in thin films for poly[(R)-3-hydroxybutyric acid] and its copolymers revealed by real-time atomic force microscopy

Enzymatic degradation processes of flat-on lamellar crystals in melt-crystallized thin films of poly[(R)-3-hydroxybutyric acid] (P(3HB)) and its copolymers were characterized by real-time atomic force microscopy (AFM) in a phosphate buffer solution containing PHB depolymerase from Ralstonia pickettii T1. Fiberlike crystals with regular intervals were generated along the crystallographic a axis at the end of lamellar crystals during the enzymatic degradation. The morphologies and sizes of the fiberlike crystals were markedly dependent on the compositions of comonomer units in the polyesters. Length, width, interval, and thickness of the fiberlike crystals after the enzymatic degradation for 2 h were measured by AFM, and the dimensions were related to the solid-state structures of P(3HB) and its copolymers. The width and thickness decreased at the tip of fiberlike crystals, indicating that the enzymatic degradation of crystals takes place not only along the a axis but also along the b and c axes. These results from AFM measurement were compared with the data on crystal size by wide-angle X-ray diffraction, and on lamellar thickness and long period by small-angle X-ray scattering. In addition, the enzymatic erosion rate of flat-on lamellar crystals along the a axis was measured from real-time AFM height images. A schematic glacier model for the enzymatic degradation of flat-on lamellar crystals of P(3HB) by PHB depolymerase has been proposed on the basis of the AFM observations.

Direct observation of poly(3-hydroxybutyrate) depolymerase adsorbed on polyester thin film by atomic force microscopy

Poly[(R)-3-hydroxybutyrate] (PHB) depolymerases adsorbed on poly(L-lactide) (PLLA) thin film were directly observed by atomic force microscopy (AFM). A PLLA thin film of 100 nm thickness was prepared on a silicon wafer by spin-cast method. The PLLA thin film was treated at 220 degrees C and quenched to room temperature, resulting in the formation of a completely amorphous film with a smooth surface. Then, the PHB depolymerases from Pseudomonas stutzeri YM1006 and Ralstonia pickettii T1 were dispersed on the amorphous PLLA thin film. Direct AFM observation has revealed that the PHB depolymerases bind in an elliptic shape on the surface of the PLLA thin film and that a small ridge is created around each enzyme molecule. After removal of the enzymes with 40% ethanol aqueous solution, small hollows were found on the PLLA thin film. These results suggest that a PHB depolymerase interacts with polyester molecules during their adsorption to make a hollow on the substrate surface.

Morphology and enzymatic degradation of oriented thin film of ultrahigh molecular weight poly[(R)-3-hydroxybutyrate]

Thin films of ultrahigh molecular weight poly[(R)-3-hydroxybutyrate] (P(3HB)) were sheared and isothermally crystallized at 100 degrees C. Transmission electron microscopy and atomic force microscopy (AFM) observations revealed that thick fibrous textures, on which lamellae are overgrown normal to the long axis of the fibril, run parallel to the shearing direction. A selected area electron diffraction pattern taken from the fibrils exhibits a fiber pattern of P(3HB) alpha-modification, and the crystallographic c-axis (chain axis) of P(3HB) is set parallel to the long axis of the fibril. In situ AFM observations of enzymatic degradation for the thin film were performed with an extracellular P(3HB) depolymerase from Ralstonia pickettii T1 in a buffer solution. The film surface and thickness became rougher and thinner, respectively, with time after adding the enzyme. During the degradation, fine shish-kebab structures appeared gradually. This fact supports that the amorphous region in the film is preferentially degraded rather than the crystalline one by the depolymerase. The in situ AFM observations also revealed that one thick fibril in the original film is composed of three different states, namely, finer fibril (shish), stacked lamellae (kebab) in edge-on state, and the surrounding amorphous phase.

Purification and characterization ofThermobifida fuscaxylanase 10B

Thermobifida fusca grows well on cellulose and xylan, and produces a number of cellulases and xylanases. The gene encoding a previously unstudied endoxylanase, xyl10B, was overexpressed in E. coli, and the protein was purified and characterized. Mature Xyl10B is a 43-kDa glycohydrolase with a short basic domain at the C-terminus. It has moderate thermostability, maintaining 50% of its activity after incubation for 16 h at 62 °C, and is most active between pH 5 and 8. Xyl10B is produced by growth of T. fusca on xylan or Solka Floc but not on pure cellulose. Mass spectroscopic analysis showed that Xyl10B produces xylobiose as the major product from birchwood and oat spelts xylan and that its hydrolysis products differ from those of T. fusca Xyl11A. Xyl10B hydrolyzes various p-nitrophenyl-sugars, including p-nitrophenyl α-D-arabinofuranoside, p-nitrophenyl-β-D-xylobioside, p-nitrophenyl-β-D-xyloside, and p-nitrophenyl-β-D-cellobioside. Xyl11A has higher activity on xylan substrates, but Xyl10B produced more reducing sugars from corn fiber than did Xyl11A.Key words: xylanase, enzyme purification, Thermobifida fusca, family 10 hydrolase.

Correlation between structure of the lactones and substrate specificity in enzyme-catalyzed polymerization for the synthesis of polyesters

Small-size (4-membered) and medium-size (5-, 6-, and 7-membered) unsubstituted lactones as well as unsubstituted macrolides (12 and 13 membered) were subjected to the ring-opening polymerization using the extracellular PHB depolymerase from Alcaligenes faecalis T1 (PhaZ(Afa)). The characteristic reactivities of the lactones were discussed based on a tertiary structure model of the active site of the PhaZ(Afa). With respect to the ring-size of the lactones, the 4-membered beta-propiolactone and 6-membered delta-valerolactone (delta-VL) showed the highest polymerization activity, and delta-VL seemed to be the upper size limit for the molecular recognition of the narrow active site cleft of PhaZ(Afa). On the other hand, epsilon-caprolactone, 11-undecanolide, and 12-dodecanolide, which showed excellent polymerization activities by lipases, were scarcely polymerized by PhaZ(Afa). This was ascribed to the difference in the recognition sites between PhaZ(Afa) and lipase. In addition, the effect of the substrate-binding domain of PhaZ(Afa) and the enantioselective ring-opening polymerization of (R,S)-beta-butyrolactone ((R,S)-beta-BL) were studied. The substrate-binding domain lacking PhaZ(Afa) showed higher reactivities than PhaZ(Afa) for the polymerization of the lactones and that a significant enantioselectivity was observed at the early stage of the polymerization of (R,S)-beta-BL to produce the (R)-enriched optically active poly(3-hydroxybutyrate).

Microbial degradation of polyhydroxyalkanoates

Polyesters such as poly(3-hydroxybutyrate) (PHB) or other polyhydroxyalkanoates (PHA) have attracted commercial and academic interest as new biodegradable materials. The ability to degrade PHA is widely distributed among bacteria and fungi and depends on the secretion of specific extracellular PHA depolymerases (e-PHA depolymerases), which are carboxyesterases (EC 3.1.1.75 and EC 3.1.1.76), and on the physical state of the polymer (amorphous or crystalline). This contribution provides a summary of the biochemical and molecular biological characteristics of e-PHA depolymerases and focuses on the intracellular mobilization of storage PHA by intracellular PHA depolymerases (i-PHA depolymerases) of PHA-accumulating bacteria. The importance of different assay systems for PHA depolymerase activity is also discussed.

Involvement of catalytic amino acid residues in enzyme-catalyzed polymerization for the synthesis of polyesters

Recently, a variety of aliphatic polyesters have been synthesized using hydrolases such as lipases and PHB depolymerases, and the reaction mechanism for these enzyme-catalyzed polymerization has been discussed. In this paper, we have studied the involvement of the catalytic amino acid residues of the hydrolase in enzyme-catalyzed polymerization with an extracellular PHB depolymerase from Alcaligenes faecalis T1. A wild-type PHB depolymerase and three kinds of site-specific mutants (catalytic amino acids were substituted) were prepared and their polymerization activities for the ring-opening polymerization of (R)-beta-butyrolactone (BL) were compared. BL was polymerized at 80 degrees C in bulk by the wild-type enzyme to yield polymers consisting of cyclic and linear structures in a high monomer conversion. In contrast, none of the mutant enzymes showed obvious polymerization activity. These results have clearly demonstrated that the catalytic triad is indeed responsible for the enzyme-catalyzed polymerization of BL.

Analysis of adsorption function of polyhydroxybutyrate depolymerase from Alcaligenes faecalis T1 by using a quartz crystal microbalance

Enzymatic adsorption and degradation of three types of aliphatic polyester films and two types of polyolefin films by the extracellular PHB depolymerase from Alcaligenes faecalis T1 have been studied by using a quartz crystal microbalance (QCM) technique. Hydrolysis of poly[(R)-3-hydroxybutyrate] was quantitatively followed by the QCM technique. Adsorption of the enzymes to films was also quantitatively detected by the QCM. Kinetic study on enzymatic adsorption suggests that the PHB depolymerase binds to the substrates not only by hydrophobic interaction but also by specific interaction between the ester bonds of polyesters and the binding domain of the enzyme. The results show that the QCM technique is a sensitive tool to study enzymatic degradation kinetics of biodegradable polyesters.

Change of surface structure of poly(3-hydroxybutyrate) film upon enzymatic hydrolysis by PHB depolymerase

The change in the surface structure of poly[(R)-3-hydroxybutyrate] [PHB] films upon the enzymatic hydrolysis was analyzed by attenuated total reflection infrared [ATR/IR] spectrometry. As enzymes, PHB depolymerases isolated from Ralstonia pickettii T1 and Pseudomonas stutzeri were used. By curve decomposition of the carbonyl stretching band of ATR/IR spectra, the change in the surface crystallinity of PHB films by exposure to buffer containing 0, 1, and 4 microg of PHB depolymerases was estimated. It has been widely believed that the enzymatic hydrolysis first occurs in the amorphous phase, followed by the degradation in the crystalline phase, and extracellular PHB depolymerase can degrade only polymer chains in the surface layer of the film. Therefore, the surface crystallinity had been expected to increase upon the enzymatic degradation. However, the results were contrary to this expectation. The surface crystallinity was decreased by the enzymatic attack. Because ATR/IR spectrometry is sensitive to a small change in molecular structure of the sample surface, the decrease in the crystallinity shown by ATR/IR experiments probably does not indicate the complete loss of regularity of the crystalline phase. Because the chains at crystalline surface are more mobile than those inside the crystals, the C=O band for crystalline surface may appear at a position similar to those of the amorphous or interfacial phase in ATR/IR spectra of PHB. Only the chains inside the crystals may contribute to the C=O band of the crystalline phase. Thus, we rather suppose that the decrease in the crystalline peak of the ATR/IR spectra reflects the change in chain mobility or the increase of crystalline surface area by cracking of lamellas at the surface layers of PHB films or both.

Nonhydrolytic fragmentation of a poly[(R)-3-hydroxybutyrate] single crystal revealed by use of a mutant of polyhydroxybutyrate depolymerase

This paper reports the initial process of the enzymatic degradation of solution-grown lamellar single crystals of bacterial poly[(R)-3-hydroxybutyrate] (P(3HB)) with an extracellular polyhydroxybutyrate (PHB) depolymerase purified from Alcaligenes faecalis T1. We used a hydrolytic-activity-disrupted mutant of the PHB depolymerase in order to avoid the influence of hydrolytic reaction in the system. The effect of addition of the mutant enzyme upon the P(3HB) single crystals was investigated by turbidimetric assay, high-performance liquid chromatography (HPLC), and atomic force microscopy (AFM). Suspension turbidity of the P(3HB) single crystals increased after addition of the mutant enzyme having no hydrolytic activity. No soluble product from the P(3HB) single crystals with the mutant enzyme was detected by HPLC. AFM observation of the P(3HB) single crystals adsorbed on highly ordered pyrolytic graphite revealed that the mutant enzyme yielded a lot of lengthwise crystal fragments from the P(3HB) single crystals. On the basis of these results, we concluded that the mutant enzyme disturbs the molecular packing of the P(3HB) polymer chain around the loose chain packing region in the single crystal, resulting in the fragmentation. Therefore, it is suggested that the enzymatic degradation of P(3HB) single crystals with a wild-type PHB depolymerase progresses via three steps: (1) adsorption of the enzyme onto the surface of the single crystal; (2) disturbance of the molecular packing of P(3HB) polymer chain in the single crystal by the adsorbed enzyme; and (3) hydrolysis of the disturbed polymer chain by the adsorbed enzyme.

Enzymatic hydrolysis of oligomeric models of poly-3-hydroxybutyrate

The mechanism of the enzymatic degradation of poly([R]-3-hydroxybutyrate) (PHB) was investigated by using well-defined model substrates, including both linear and cyclic [R]-3-hydroxybutyrate (3HB) and [R]-3-hydroxyvalerate (3HV) oligomers, with two different PHB depolymerases. The linear and cyclic oligomers containing from 2 to 10 repeating units were hydrolyzed in solutions of the depolymerase isolated from Aspergillus fumigatus and Alcaligenes faecalis, and the rates of hydrolysis and types of products formed were characterized. Both of the depolymerases catalyzed the hydrolysis of the cyclic oligomers (macrolides) which contained more than three 3HB and 3HV repeating units. The degradation reactions of the linear and cyclic 3HB oligomers with the A. fumigatus depolymerase gave similar ratios of monomer-to-dimer products, but PHB itself formed mostly monomer on hydrolysis, indicating that the enzymatic hydrolysis reactions occurred by different mechanisms for these different types of substrates. The results of this study conclusively show that at least the endo mode of polymer hydrolysis occurs with the two enzymes studied, while the A. fumigatus depolymerase was found to utilize both endo and exo modes of hydrolysis to efficiently degrade PHB and 3HB oligomers.

Microbial degradation of polyesters

Polyesters, such as microbially produced poly[(R)-3-hydroxybutyric acid] [poly(3HB)], other poly[(R)-hydroxyalkanoic acids] [poly(HA)] and related biosynthetic or chemosynthetic polyesters are a class of polymers that have potential applications as thermoplastic elastomers. In contrast to poly(ethylene) and similar polymers with saturated, non-functionalized carbon backbones, poly(HA) can be biodegraded to water, methane, and/or carbon dioxide. This review provides an overview of the microbiology, biochemistry and molecular biology of poly(HA) biodegradation. In particular, the properties of extracellular and intracellular poly(HA) hydrolyzing enzymes [poly(HA) depolymerases] are described.

Cloning of an intracellular Poly[D(-)-3-Hydroxybutyrate] depolymerase gene from Ralstonia eutropha H16 and characterization of the gene product

An intracellular poly[D(-)-3-hydroxybutyrate] (PHB) depolymerase gene (phaZ) has been cloned from Ralstonia eutropha H16 by the shotgun method, sequenced, and characterized. Nucleotide sequence analysis of a 2.3-kbp DNA fragment revealed an open reading frame of 1,260 bp, encoding a protein of 419 amino acids with a predicted molecular mass of 47,316 Da. The crude extract of Escherichia coli containing the PHB depolymerase gene digested artificial amorphous PHB granules and released mainly oligomeric D(-)-3-hydroxybutyrate, with some monomer. The gene product did not hydrolyze crystalline PHB or freeze-dried artificial amorphous PHB granules. The deduced amino acid sequence lacked sequence corresponding to a classical lipase box, Gly-X-Ser-X-Gly. The gene product was expressed in R. eutropha cells concomitant with the synthesis of PHB and localized in PHB granules. Although a mutant of R. eutropha whose phaZ gene was disrupted showed a higher PHB content compared to the wild type in a nutrient-rich medium, it accumulated PHB as much as the wild type did in a nitrogen-free, carbon-rich medium. These results indicate that the cloned phaZ gene encodes an intracellular PHB depolymerase in R. eutropha.

Molecular cloning, sequencing, and expression in Escherichia coli of the gene encoding a novel 5-oxoprolinase without ATP-hydrolyzing activity from Alcaligenes faecalis N-38A

The gene encoding a novel 5-oxoprolinase without ATP-hydrolyzing activity from Alcaligenes faecalis N-38A was cloned and characterized. The coding region of this gene is 1,299 bp long. The predicted primary protein is composed of 433 amino acid residues, with a 31-amino-acid signal peptide. The mature protein is composed of 402 amino acid residues with a molecular mass of 46,163 Da. The derived amino acid sequence of the enzyme showed no significant sequence similarity to any other proteins reported so far. The 5-oxoprolinase gene was expressed in Escherichia coli by using a regulatory expression system with an isopropyl-beta-D-thiogalactopyranoside-inducible tac promoter, and its expression level was approximately 16 mg per liter. The purified enzyme has the same characteristics as the authentic enzyme, except for the amino terminus, which has three additional amino acids. The enzyme was markedly inhibited by p-chloromercuribenzoic acid, EDTA, o-phenanthroline, HgCl(2), and CuSO(4). The EDTA-inactivated enzyme was completely restored by the addition of Zn(2+) or Co(2+). In addition, the enzyme was found to contain 1 g-atom of zinc per mol of protein. These results suggest that the 5-oxoprolinase produced by A. faecalis N-38A is a zinc metalloenzyme.

Poly(3-hydroxyvalerate) depolymerase of Pseudomonas lemoignei

Pseudomonas lemoignei is equipped with at least five polyhydroxyalkanoate (PHA) depolymerase structural genes (phaZ1 to phaZ5) which enable the bacterium to utilize extracellular poly(3-hydroxybutyrate) (PHB), poly(3-hydroxyvalerate) (PHV), and related polyesters consisting of short-chain-length hxdroxyalkanoates (PHA(SCL)) as the sole sources of carbon and energy. Four genes (phaZ1, phaZ2, phaZ3, and phaZ5) encode PHB depolymerases C, B, D, and A, respectively. It was speculated that the remaining gene, phaZ4, encodes the PHV depolymerase (D. Jendrossek, A. Frisse, A. Behrends, M. Andermann, H. D. Kratzin, T. Stanislawski, and H. G. Schlegel, J. Bacteriol. 177:596-607, 1995). However, in this study, we show that phaZ4 codes for another PHB depolymeraes (i) by disagreement of 5 out of 41 amino acids that had been determined by Edman degradation of the PHV depolymerase and of four endoproteinase GluC-generated internal peptides with the DNA-deduced sequence of phaZ4, (ii) by the lack of immunological reaction of purified recombinant PhaZ4 with PHV depolymerase-specific antibodies, and (iii) by the low activity of the PhaZ4 depolymerase with PHV as a substrate. The true PHV depolymerase-encoding structural gene, phaZ6, was identified by screening a genomic library of P. lemoignei in Escherichia coli for clearing zone formation on PHV agar. The DNA sequence of phaZ6 contained all 41 amino acids of the GluC-generated peptide fragments of the PHV depolymerase. PhaZ6 was expressed and purified from recombinant E. coli and showed immunological identity to the wild-type PHV depolymerase and had high specific activities with PHB and PHV as substrates. To our knowledge, this is the first report on a PHA(SCL) depolymerase gene that is expressed during growth on PHV or odd-numbered carbon sources and that encodes a protein with high PHV depolymerase activity. Amino acid analysis revealed that PhaZ6 (relative molecular mass [M(r)], 43,610 Da) resembles precursors of other extracellular PHA(SCL) depolymerases (28 to 50% identical amino acids). The mature protein (M(r), 41,048) is composed of (i) a large catalytic domain including a catalytic triad of S(136), D(211), and H(269) similar to serine hydrolases; (ii) a linker region highly enriched in threonine residues and other amino acids with hydroxylated or small side chains (Thr-rich region); and (iii) a C-terminal domain similar in sequence to the substrate-binding domain of PHA(SCL) depolymerases. Differences in the codon usage of phaZ6 for some codons from the average codon usage of P. lemoignei indicated that phaZ6 might be derived from other organisms by gene transfer. Multialignment of separate domains of bacterial PHA(SCL) depolymerases suggested that not only complete depolymerase genes but also individual domains might have been exchanged between bacteria during evolution of PHA(SCL) depolymerases.

A modular cinnamoyl ester hydrolase from the anaerobic fungus Piromyces equi acts synergistically with xylanase and is part of a multiprotein cellulose-binding cellulase-hemicellulase complex

A collection of clones, isolated from a Piromyces equi cDNA expression library by immunoscreening with antibodies raised against affinity purified multienzyme fungal cellulase-hemicellulase complex, included one which expressed cinnamoyl ester hydrolase activity. The P. equi cinnamoyl ester hydrolase gene (estA) comprised an open reading frame of 1608 nt encoding a protein (EstA) of 536 amino acids and 55540 Da. EstA was modular in structure and comprised three distinct domains. The N-terminal domain was closely similar to a highly conserved non-catalytic 40-residue docking domain which is prevalent in cellulases and hemicellulases from three species of anaerobic fungi and binds to a putative scaffolding protein during assembly of the fungal cellulase complex. The second domain was also not required for esterase activity and appeared to be an atypically large linker comprising multiple tandem repeats of a 13-residue motif. The C-terminal 270 residues of EstA contained an esterase catalytic domain that exhibited overall homology with a small family of esterases, including acetylxylan esterase D (XYLD) from Pseudomonas fluorescens subsp. cellulosa and acetylxylan esterase from Aspergillus niger. This region also contained several smaller blocks of residues that displayed homology with domains tentatively identified as containing the essential catalytic residues of a larger group of serine hydrolases. A truncated variant of EstA, comprising the catalytic domain alone (EstA'), was expressed in Escherichia coli as a thioredoxin fusion protein and was purified to homogeneity. EstA' was active against synthetic and plant cell-wall-derived substrates, showed a marked preference for cleaving 1-->5 ester linkages between ferulic acid and arabinose in feruloylated arabino-xylo-oligosaccharides and was inhibited by the serine-specific protease inhibitor aminoethylbenzene-sulphonylfluoride. EstA' acted synergistically with xylanase to release more than 60% of the esterified ferulic acid from the arabinoxylan component of plant cell walls. Western analysis confirmed that EstA is produced by P. equi and is a component of the aggregated multienzyme cellulase-hemicellulase complex. Hybrid proteins, harbouring one, two or three iterations of the conserved 40-residue fungal docking domain fused to the reporter protein glutathione S-transferase, were produced. Western blot analysis of immobilized P. equi cellulase-hemicellulase complex demonstrated that each of the hybrid proteins bound to a 97 kDa polypeptide in the extracellular complex.

Structural effects on enzymatic degradabilities for poly[(R)-3-hydroxybutyric acid] and its copolymers

Poly[(R)-3-hydroxybutyric acid] and its copolymers were prepared by biosynthetic and chemosynthetic methods. The films of polyesters were prepared by both the solution-cast and melt-crystallized techniques. The enzymatic degradation of polyester films was carried out at 37 degrees C in an aqueous solution (pH 7.4) of PHB depolymerase from Alcaligenes faecalis. The rate of enzymatic erosion on the solution-cast films increased markedly with an increase in the fraction of second monomer units up to 10-20 mol% to reach a maximum value followed by a decrease in the erosion rate. Analysis of the water-soluble products liberated during the enzymatic degradation of polyester films showed the formation of a mixture of monomers and oligomers of (R)-3HB and hydroxyalkanoic acids units, suggesting that the active site of PHB depolymerase recognizes at least three monomeric units as substrate for the hydrolysis of ester bonds in a polymer chain. The rate of enzymatic erosion of melt-crystallized polyester films decreased with an increase in crystallinity. PHB depolymerase predominantly hydrolyzed the polymer chains in the amorphous phase and subsequently eroded crystalline phase. In addition, the enzymatic degradation of crystalline phase by PHB depolymerase progressed from the edges of crystalline lamellar stacks. The enzymatic erosion rate of crystalline phase in polyester films decreased with an increase in the lamellar thickness.