Structural, optical, and magnetic properties of NiMoO4 nanorods prepared by microwave sintering

Exploring a facile preparation method for Co-Ni/MoS2-derived nanohybrid from wheat straw extract and its physicochemical properties

This study presents a novel approach for the fabrication of a Co,Ni/MoS2-derived nanohybrid material using wheat straw extract. The facile synthesis method involves a sol-gel process, followed by calcination, showcasing the potential of agricultural waste as a sustainable reducing and chelating reagent. The as-prepared nanohybrid has been characterized using different techniques to analyse its physicochemical properties. X-ray diffraction analysis confirmed the successful synthesis of the nanohybrid material, identifying the presence of NiMoO4, CoSO4 and Mo17O47 as its components. Fourier-transform infrared spectroscopy differentiated the functional groups present in the wheat straw biomass and those in the nanohybrid material, highlighting the formation of metal-oxide and sulphide bonds. Scanning electron microscopy revealed a heterogeneous morphology with agglomerated structures and a grain size of around 70 nm in the nanohybrid. Energy-dispersive X-ray spectroscopy analysis shows the composition of elements with weight percentages of (Mo) 9.17%, (S) 6.21%, (Co) 12.48%, (Ni) 12.18% and (O) 50.46% contributing to its composition. Electrochemical analysis performed through cyclic voltammetry showcased the exceptional performance of the nanohybrid material as compared with MoS2, suggesting its possible applications for designing biosensors and related technologies. Thus, the research study presented herein underscores the efficient utilization of natural resources for the development of functional nanomaterials with promising applications in various fields. This study paves a way for manufacturing innovation along with advancement of novel synthesis method for sustainable nanomaterial for future technological developments.

Clearing Up Discrepancies in 2D and 3D Nickel Molybdate Hydrate Structures

When electrocatalysts are prepared, modification of the morphology is a common strategy to enhance their electrocatalytic performance. In this work, we have examined and characterized nanorods (3D) and nanosheets (2D) of nickel molybdate hydrates, which previously have been treated as the same material with just a variation in morphology. We thoroughly investigated the materials and report that they contain fundamentally different compounds with different crystal structures, chemical compositions, and chemical stabilities. The 3D nanorod structure exhibits the chemical formula NiMoO4·0.6H2O and crystallizes in a triclinic system, whereas the 2D nanosheet structures can be rationalized with Ni3MoO5-0.5x(OH)x·(2.3 - 0.5x)H2O, with a mixed valence of both Ni and Mo, which enables a layered crystal structure. The difference in structure and composition is supported by X-ray photoelectron spectroscopy, ion beam analysis, thermogravimetric analysis, X-ray diffraction, electron diffraction, infrared spectroscopy, Raman spectroscopy, and magnetic measurements. The previously proposed crystal structure for the nickel molybdate hydrate nanorods from the literature needs to be reconsidered and is here refined by ab initio molecular dynamics on a quantum mechanical level using density functional theory calculations to reproduce the experimental findings. Because the material is frequently studied as an electrocatalyst or catalyst precursor and both structures can appear in the same synthesis, a clear distinction between the two compounds is necessary to assess the underlying structure-to-function relationship and targeted electrocatalytic properties.

Hot Corrosion Behavior of TWAS and HVOF NiCr-Based Coatings in Molten Salt

In order to extend the life of boilers by applying an anti-corrosion coating without the need to dismantle them, it is advisable to find coatings that can be applied using cheaper and portable techniques, such as Twin Wire Arc Spray technology (TWAS). In this study, we compare selected NiCr-based coatings and two uncoated steel substrates (steel 1.7715 and 1.4903). Two coatings, Cr3C2 - 25% NiCr and Hastelloy C-276 are deposited using High velocity oxygen-fuel technology (HVOF) and three coatings, NiCrTi, NiCrMo, and Inconel 625, are deposited using TWAS. In addition to the corrosion weight gain during 50 cycles of loading in an 18% Na2SO4 and 82% Fe2(SO4)3 salt environment at 690 °C evaluated using the gravimetric method, the microstructure and phase composition of the coatings were analyzed on the samples after the exposure in order to compare the properties and gain a deeper understanding of the corrosion kinetics. Coating cross-sections and free-surfaces were observed with a scanning electron microscope (SEM) with an energy-dispersive (EDX) system. The phase composition was investigated using X-ray diffraction (XRD) and Raman spectroscopy. No significant differences were observed between the TWAS and HVOF coating methods for the coatings compared. Due to the similar corrosion products found on all coatings, a very effective corrosion protective layer was formed on the surface, forming a barrier between the corrosive environment and the coating regardless of the used deposition technology. Therefore, for industrial use on the inner surface of coal-fired boilers we recommend NiCrTi, NiCrMo, or Inconel coatings prepared with the more cost-effective and portable TWAS technology.

Spectromicroscopy of Nanoscale Materials in the Tender X-Ray Regime Enabled by a High Efficient Multilayer-Based Grating Monochromator

The combination of near edge X-ray absorption spectroscopy with nanoscale X-ray imaging is a powerful analytical tool for many applications in energy technologies, catalysis, which are critical to combat climate change, as well as microelectronics and life science. Materials from these scientific areas often contain key elements, such as Si, P, S, Y, Zr, Nb, and Mo as well as lanthanides, whose X-ray absorption edges lie in the so-called tender photon energy range 1.5-5.0 keV. Neither conventional grazing incidence grating nor crystal monochromators have high transmission in this energy range, thereby yielding the tender photon energy gap. To close this gap, a monochromator setup based on a multilayer coated blazed plane grating and plane mirror is devised. The measurements show that this novel concept improves the photon flux in the tender X-ray regime by two-orders-of-magnitude enabling previously unattainable laboratory and synchrotron-based studies. This setup is applied to perform nanoscale spectromicroscopy studies. The high photon flux provides sufficient sensitivity to obtain the electronic structure of Mo in platinum-free MoNi₄ nanoparticles for electrochemical energy conversion. Additionally, it is shown that the chemical bonding of nano-structures in integrated circuits can be distinguished by the electronic configuration at the Si-K edge.

Part I: NiMoO4 Nanostructures Synthesized by the Solution Combustion Method: A Parametric Study on the Influence of Synthesis Parameters on the Materials’ Physicochemical, Structural, and Morphological Properties

The impact of process conditions on the synthesis of NiMoO₄ nanostructures using a solution combustion synthesis (SCS) method, in which agar powder and Ni(NO₃)₂ were utilized as fuel and as the oxidant, respectively, was thoroughly studied. The results show that the calcination temperature had a significant implication on the specific surface area, phase composition, particle size, band gap, and crystallite size. The influence of calcination time on the resulting physicochemical/structural/morphological properties of NiMoO₄ nanostructures was found to be a major effect during the first 20 min, beyond which these properties varied to a lesser extent. The increase in the Ni/Mo atomic ratio in the oxide impacted the combustion dynamics of the system, which led to the formation of higher surface area materials, with the prevalence of the β-phase in Ni-rich samples. Likewise, the change in the pH of the precursor solution showed that the combustion reaction is more intense in the high-pH region, entailing major implications on the physicochemical properties and phase composition of the samples. The change in the fuel content showed that the presence of agar is important, as it endows the sample with a fluffy, porous texture and is also vital for the preponderance of the β-phase.

Structural formation of multifunctional NiMoO4 nanorods for thermoelectric applications

We report on the synthesis and characterization of NiMoO4 (NMO) nanorods via the hydrothermal method.

From NiMoO4 to γ-NiOOH: Detecting the Active Catalyst Phase by Time Resolved in Situ and Operando Raman Spectroscopy

Water electrolysis powered by renewable energies is a promising technology to produce sustainable fossil free fuels. The development and evaluation of effective catalysts are here imperative; however, due to the inclusion of elements with different redox properties and reactivity, these materials undergo dynamical changes and phase transformations during the reaction conditions. NiMoO4 is currently investigated among other metal oxides as a promising noble metal free catalyst for the oxygen evolution reaction. Here we show that at applied bias, NiMoO4·H2O transforms into γ-NiOOH. Time resolved operando Raman spectroscopy is utilized to follow the potential dependent phase transformation and is collaborated with elemental analysis of the electrolyte, confirming that molybdenum leaches out from the as-synthesized NiMoO4·H2O. Molybdenum leaching increases the surface coverage of exposed nickel sites, and this in combination with the formation of γ-NiOOH enlarges the amount of active sites of the catalyst, leading to high current densities. Additionally, we discovered different NiMoO4 nanostructures, nanoflowers, and nanorods, for which the relative ratio can be influenced by the heating ramp during the synthesis. With selective molybdenum etching we were able to assign the varying X-ray diffraction (XRD) pattern as well as Raman vibrations unambiguously to the two nanostructures, which were revealed to exhibit different stabilities in alkaline media by time-resolved in situ and operando Raman spectroscopy. We advocate that a similar approach can beneficially be applied to many other catalysts, unveiling their structural integrity, characterize the dynamic surface reformulation, and resolve any ambiguities in interpretations of the active catalyst phase.

Effect of the Anionic Counterpart: Molybdate vs. Tungstate in Energy Storage for Pseudo-Capacitor Applications

Nickel-based bimetallic oxides (BMOs) have shown significant potential in battery-type electrodes for pseudo-capacitors given their ability to facilitate redox reactions. In this work, two bimetallic oxides, NiMoO4 and NiWO4, were synthesized using a wet chemical route. The structure and electrochemical properties of the pseudo-capacitor cathode materials were characterized. NiMoO4 showed superior charge storage performance in comparison to NiWO4, exhibiting a discharge capacitance of 124 and 77 F.g-1, respectively. NiMoO4, moreover, demonstrates better capacity retention after 1000 cycles with 87.14% compared to 82.22% for NiWO4. The lower electrochemical performance of the latter was identified to result from the redox behavior during cycling. NiWO4 reacts in the alkaline solution and forms a passivation layer composed of WO3 on the electrode, while in contrast, the redox behavior of NiMoO4 is fully reversible.

Role of Mixed Oxides in Hydrogen Production through the Dry Reforming of Methane over Nickel Catalysts Supported on Modified γ-Al2O3

H2 production through dry reforming of methane (DRM) is a hot topic amidst growing environmental and atom-economy concerns. Loading Ni-based reducible mixed oxide systems onto a thermally stable support is a reliable approach for obtaining catalysts of good dispersion and high stability. Herein, NiO was dispersed over MOx-modified-γ-Al2O3 (M = Ti, Mo, Si, or W; x = 2 or 3) through incipient wetness impregnation followed by calcination. The obtained catalyst systems were characterized by infrared, ultraviolet–visible, and X-ray photoelectron spectroscopies, and H2 temperature-programmed reduction. The mentioned synthetic procedure afforded the proper nucleation of different NiO-containing mixed oxides and/or interacting-NiO species. With different modifiers, the interaction of NiO with the γ-Al2O3 support was found to change, the Ni2+ environment was reformed exclusively, and the tendency of NiO species to undergo reduction was modified greatly. Catalyst systems 5Ni3MAl (M = Si, W) comprised a variety of species, whereby NiO interacted with the modifier and the support (e.g., NiSiO3, NiAl2O4, and NiWO3). These two catalyst systems displayed equal efficiency, >70% H2 yield at 800 °C, and were thermally stable for up to 420 min on stream. 5Ni3SiAl catalyst regained nearly all its activity during regeneration for up to two cycles.

Synthesis of a NiMoO4/3D-rGO Nanocomposite via Starch Medium Precipitation Method for Supercapacitor Performance

This paper presents research on the synergistic effects of nickel molybdate and reduced graphene oxide as a nanocomposite for further development of energy storage systems. An enhancement in the electrochemical performance of supercapacitor electrodes occurs by synthesizing highly porous structures and achieving more surface area. In this work, a chemical precipitation technique was used to synthesize the NiMoO4/3D-rGO nanocomposite in a starch media. Starch was used to develop the porosities of the nanostructure. A temperature of 350 °C was applied to transform graphene oxide sheets to reduced graphene oxide and remove the starch to obtain the NiMoO4/3D-rGO nanocomposite with porous structure. The X-ray diffraction pattern of the NiMoO4 nano particles indicated a monoclinic structure. Also, the scanning electron microscope observation showed that the NiMoO4 NPs were dispersed across the rGO sheets. The electrochemical results of the NiMoO4/3D-rGO electrode revealed that the incorporation of rGO sheets with NiMoO4 NPs increased the capacity of the nanocomposite. Therefore, a significant increase in the specific capacity of the electrode was observed with the NiMoO4/3D-rGO nanocomposite (450 Cg−1 or 900 Fg−1) when compared with bare NiMoO4 nanoparticles (350 Cg−1 or 700 Fg−1) at the current density of 1 A g−1. Our findings show that the incorporation of rGO and NiMoO4 NP redox reactions with a porous structure can benefit the future development of supercapacitors.

Bimetallic nickel molybdate supported Pt catalyst for efficient removal of formaldehyde at low temperature

Efficient removal of formaldehyde from indoor environments is of significance for human health. In this work, a typical binary transition metal oxide that could provide various oxidation states, β-NiMoO₄, was employed as a support to immobilize the active Pt component (Pt/NiMoO₄) for catalytic formaldehyde elimination at low ambient temperature (15°C). The results showed that the hydrothermal preparation temperature and time had a noticeable impact on the morphology and catalytic activity of the samples. The catalyst prepared with hydrothermal temperature of 150°C for 4 hr (Pt-150-4) exhibited superior catalytic activity and stability mainly due to its distinctly porous structure, relative abundance of adsorbed surface hydroxyls/water, and high oxidation ability, which resulted from the interaction of Pt with Ni and Mo of the bimetallic NiMoO₄ support. Our results might shed light on the rational design of multifunctional catalysts for removal of indoor air pollutants at low ambient temperature.

Enhanced microwave absorption capacity of hierarchical structural MnO2@NiMoO4 composites

MnO₂@NiMoO₄ exhibits enhanced microwave absorption capacity, which originates from the hierarchical hybrid nanostructures, multi-effective components, good impedance matching, and interfacial polarization between MnO₂ and NiMoO₄.

Identifying and rationalizing the morphological, structural, and optical properties of [Formula: see text]-Ag2MoO4 microcrystals, and the formation process of Ag nanoparticles on their surfaces: combining experimental data and first-principles calculations

We present a combined theoretical and experimental study on the morphological, structural, and optical properties of β-Ag2MoO4 microcrystals. β-Ag2MoO4 samples were prepared by a co-precipitation method. The nucleation and formation of Ag nanoparticles on β-Ag2MoO4 during electron beam irradiation were also analyzed as a function of electron beam dose. These events were directly monitored in real-time using in situ field emission scanning electron microscopy (FE-SEM). The thermodynamic equilibrium shape of the β-Ag2MoO4 crystals was built with low-index surfaces (001), (011), and (111) through a Wulff construction. This shape suggests that the (011) face is the dominating surface in the ideal morphology. A significant increase in the values of the surface energy for the (011) face versus those of the other surfaces was observed, which allowed us to find agreement between the experimental and theoretical morphologies. Our investigation of the different morphologies and structures of the β-Ag2MoO4 crystals provided insight into how the crystal morphology can be controlled so that the surface chemistry of β-Ag2MoO4 can be tuned for specific applications. The presence of structural disorder in the tetrahedral [MoO4] and octahedral [AgO6] clusters, the building blocks of β-Ag2MoO4, was used to explain the experimentally measured optical properties.