Characterization of bone marrow mononuclear cells on biomaterials for bone tissue engineering in vitro

Clinical outcomes of autologous platelet-rich plasma and bone marrow mononuclear cells grafting combined with core decompression for Association Research Circulation Osseous II-IIIA stage non-traumatic osteonecrosis of the femoral head

PURPOSE

This study aimed to investigate the efficacy and safety of autologous platelet-rich plasma (PRP) and bone marrow mononuclear cells (BMMCs) grafting combined with core decompression (CD) in the treatment of Association Research Circulation Osseous (ARCO) II-IIIA stage non-traumatic osteonecrosis of the femoral head (ONFH).

METHODS

The clinical data of 44 patients (44 hips) with non-traumatic ONFH from December 2018 to December 2019 were retrospectively reviewed. Twenty-four patients underwent CD combined with autologous PRP and BMMCs grafting (PRP+BMMCs group), and 20 patients underwent core decompression alone (CD group). During a minimum follow-up of 36 months, radiographic outcomes were evaluated using X-ray, radiographic failure rates were compared, and Harris hip score (HHS) and visual analog scale (VAS) were selected to evaluate clinical outcomes. The percentage of patients with minimal clinically important difference (MCID) in both groups was analyzed. Clinical failure was defined as further total hip arthroplasty (THA) with Kaplan-Meier survival analysis. Surgical complications were recorded.

RESULTS

All patients had well healed wounds, and no complications such as infection and thrombosis occurred. HHS and VAS scores in both the PRP+BMMCs and CD groups were better than those preoperatively (P<0.05). At the last follow-up, the HHS and VAS scores of the PRP+BMMCs group were significantly better than those of the CD group (P<0.05). In ARCO II-IIIA stage, 66.7% of the PRP+BMMCs group and 30.0% of the CD group achieved the MCID (P<0.05). The clinical and imaging failure rates in the PRP+BMMCs group were 12.5% and 20.8%, respectively, compared with 40.0% and 50.0% in the CD group (P<0.05). In ARCO II stage, the MCID, clinical and imaging failure rates of PRP+BMMCs group and CD group were 66.7% and 33.3% (P<0.05), 4.8% and 33.3% (P<0.05), 14.3% and 44.4% (P<0.05), respectively. The PRP+BMMCs group had better hip survival rate compared with CD group (P<0.05).

CONCLUSION

CD combined with autologous PRP and BMMCs grafting is a safe and effective method for the treatment of ARCO II-IIIA stage non-traumatic ONFH, especially for ARCO II stage, effectively reducing the collapse rate of the femoral head and delaying or even avoiding THA.

Review: cellularity in bone marrow autografts for bone and fracture healing

The use of autografts, as primary cell and tissue source, is the current gold standard approach to treat critical size bone defects and nonunion defects. The unique mixture of the autografts, containing bony compartments and bone marrow (BM), delivers promising results. Although BM mesenchymal stromal cells (BM-MSCs) still represent a major target for various healing approaches in current preclinical research and respective clinical trials, their occurrence in the human BM is typically low. In vitro expansion of this cell type is regulatory challenging as well as time and cost intensive. Compared with marginal percentages of resident BM-MSCs in BM, BM mononuclear cells (BM-MNCs) contained in BM aspirates, concentrates, and bone autografts represent a readily available abundant cell source, applicable within hours during surgical procedures without the need for time-consuming and regulatory challenging cell expansion. This benefit is one reason why autografting has become a clinical standard procedure. However, the exact anatomy and cellularity of BM-MNCs in humans, which is strongly correlated to their unique mode of action and wide application range remains to be elucidated. The aim of this review was to present an overview of the current knowledge on these specific cell types found in human BM, emphasize the contribution of BM-MNCs in bone healing, highlight donor site dependence, and discuss limitations in the current isolation and subsequent characterization procedures. Hereby, the most recent and relevant examples of human BM-MNC cell characterization, flow cytometric analyses, and findings are summarized, with a strong focus on bone therapy.

Intraoperative Creation of Tissue-Engineered Grafts with Minimally Manipulated Cells: New Concept of Bone Tissue Engineering In Situ

Transfer of regenerative approaches into clinical practice is limited by strict legal regulation of in vitro expanded cells and risks associated with substantial manipulations. Isolation of cells for the enrichment of bone grafts directly in the Operating Room appears to be a promising solution for the translation of biomedical technologies into clinical practice. These intraoperative approaches could be generally characterized as a joint concept of tissue engineering in situ. Our review covers techniques of intraoperative cell isolation and seeding for the creation of tissue-engineered grafts in situ, that is, directly in the Operating Room. Up-to-date, the clinical use of tissue-engineered grafts created in vitro remains a highly inaccessible option. Fortunately, intraoperative tissue engineering in situ is already available for patients who need advanced treatment modalities.

Synthetic materials in craniofacial regenerative medicine: A comprehensive overview

The state-of-the-art approach to regenerating different tissues and organs is tissue engineering which includes the three parts of stem cells (SCs), scaffolds, and growth factors. Cellular behaviors such as propagation, differentiation, and assembling the extracellular matrix (ECM) are influenced by the cell's microenvironment. Imitating the cell's natural environment, such as scaffolds, is vital to create appropriate tissue. Craniofacial tissue engineering refers to regenerating tissues found in the brain and the face parts such as bone, muscle, and artery. More biocompatible and biodegradable scaffolds are more commensurate with tissue remodeling and more appropriate for cell culture, signaling, and adhesion. Synthetic materials play significant roles and have become more prevalent in medical applications. They have also been used in different forms for producing a microenvironment as ECM for cells. Synthetic scaffolds may be comprised of polymers, bioceramics, or hybrids of natural/synthetic materials. Synthetic scaffolds have produced ECM-like materials that can properly mimic and regulate the tissue microenvironment's physical, mechanical, chemical, and biological properties, manage adherence of biomolecules and adjust the material's degradability. The present review article is focused on synthetic materials used in craniofacial tissue engineering in recent decades.

3D-Printed PLA-Bioglass Scaffolds with Controllable Calcium Release and MSC Adhesion for Bone Tissue Engineering

Large bone defects are commonly treated by replacement with auto- and allografts, which have substantial drawbacks including limited supply, donor site morbidity, and possible tissue rejection. This study aimed to improve bone defect treatment using a custom-made filament for tissue engineering scaffolds. The filament consists of biodegradable polylactide acid (PLA) and a varying amount (up to 20%) of osteoconductive S53P4 bioglass. By employing an innovative, additive manufacturing technique, scaffolds with optimized physico-mechanical and biological properties were produced. The scaffolds feature adjustable macro- and microporosity (200–2000 µm) with adaptable mechanical properties (83–135 MPa). Additionally, controllable calcium release kinetics (0–0.25 nMol/µL after 24 h), tunable mesenchymal stem cell (MSC) adhesion potential (after 24 h by a factor of 14), and proliferation (after 168 h by a factor of 18) were attained. Microgrooves resulting from the 3D-printing process on the surface act as a nucleus for cell aggregation, thus being a potential cell niche for spheroid formation or possible cell guidance. The scaffold design with its adjustable biomechanics and the bioglass with its antimicrobial properties are of particular importance for the preclinical translation of the results. This study comprehensibly demonstrates the potential of a 3D-printed bioglass composite scaffold for the treatment of critical-sized bone defects.

The Induced Membrane Technique—The Filling Matters: Evaluation of Different Forms of Membrane Filling with and without Bone Marrow Mononuclear Cells (BMC) in Large Femoral Bone Defects in Rats

The Masquelet technique is used to treat large bone defects; it is a two-stage procedure based on an induced membrane. To improve the induced membrane process, demineralized bone matrix in granular (GDBM) and fibrous form (f-DBM) was tested with and without bone marrow mononuclear cells (BMC) as filling of the membrane against the gold standard filling with syngeneic cancellous bone (SCB). A total of 65 male Sprague–Dawley rats obtained a 5 mm femoral defect. These defects were treated with the induced membrane technique and filled with SCB, GDBM, or f-DBM, with or without BMC. After a healing period of eight weeks, the femurs were harvested and submitted for histological, radiological, and biomechanical analyses. The fracture load in the defect zone was lower compared to SCB in all groups. However, histological analysis showed comparable new bone formation, bone mineral density, and cartilage proportions and vascularization. The results suggest that f-DBM in combination with BMC and the induced membrane technique cannot reproduce the very good results of this material in large, non-membrane coated bone defects, nevertheless it supports the maturation of new bone tissue locally. It can be concluded that BMC should be applied in lower doses and inflammatory cells should be removed from the cell preparation before implantation.

Tissue Engineering with Compact Bone-Derived Cell Spheroids Enables Bone Formation around Transplanted Tooth

BACKGROUND

Although tooth transplantation is a desirable treatment option for congenital defects of permanent teeth in children, transplantation to a narrow alveolar ridge is not feasible. In this study, we investigated the possibility of bone tissue engineering simultaneously with tooth transplantation to enhance the width of the alveolar bone.

METHODS

Bone marrow mononuclear cells or cortical bone-derived mesenchymal stromal cell spheroids were seeded onto atelocollagen sponge and transplanted with freshly extracted molars from mice of the same strain. New bone formation around the tooth root was evaluated using micro-computed tomography and histological analysis. Tooth alone, or tooth with scaffold but without cells, was also transplanted and served as controls.

RESULTS

Micro-computed tomography showed new bone formation in the furcation area in all four groups. Remarkable bone formation outside the root was also observed in the cortical bone-derived mesenchymal stromal cell group, but was scarce in the other three groups. Histological analysis revealed that the space between the new bone and the root was filled with collagen fibers in all four groups, indicating that the periodontal ligament was maintained.

CONCLUSION

This study demonstrates the potential of simultaneous alveolar bone expansion employing bone tissue engineering approach using cortical bone-derived mesenchymal stromal cell spheroids for tooth transplantation. The use of an orthotopic transplantation model may further clarify the feasibility and functional recovery of the transplanted tooth over a longer period.

Fibrous Demineralized Bone Matrix (DBM) Improves Bone Marrow Mononuclear Cell (BMC)-Supported Bone Healing in Large Femoral Bone Defects in Rats

Regeneration of large bone defects is a major objective in trauma surgery. Bone marrow mononuclear cell (BMC)-supported bone healing was shown to be efficient after immobilization on a scaffold. We hypothesized that fibrous demineralized bone matrix (DBM) in various forms with BMCs is superior to granular DBM. A total of 65 male SD rats were assigned to five treatment groups: syngenic cancellous bone (SCB), fibrous demineralized bone matrix (f-DBM), fibrous demineralized bone matrix densely packed (f-DBM 120%), DBM granules (GDBM) and DBM granules 5% calcium phosphate (GDBM5%Ca2+). BMCs from donor rats were combined with different scaffolds and placed into 5 mm femoral bone defects. After 8 weeks, bone mineral density (BMD), biomechanical stability and histology were assessed. Similar biomechanical properties of f-DBM and SCB defects were observed. Similar bone and cartilage formation was found in all groups, but a significantly bigger residual defect size was found in GDBM. High bone healing scores were found in f-DBM (25) and SCB (25). The application of DBM in fiber form combined with the application of BMCs shows promising results comparable to the gold standard, syngenic cancellous bone. Denser packing of fibers or higher amount of calcium phosphate has no positive effect.

Effect of Freshly Isolated Bone Marrow Mononuclear Cells and Cultured Bone Marrow Stromal Cells in Graft Cell Repopulation and Tendon-Bone Healing after Allograft Anterior Cruciate Ligament Reconstruction

Graft cell repopulation and tendon-bone tunnel healing are important after allograft anterior cruciate ligament reconstruction (ACLR). Freshly isolated bone marrow mononuclear cells (BMMNCs) have the advantage of short isolation time during surgery and may enhance tissue regeneration. Thus, we hypothesized that the effect of intra-articular BMMNCs in post-allograft ACLR treatment is comparable to that of cultured bone marrow stromal cells (BMSCs). A rabbit model of hamstring allograft ACLR was used in this study. Animals were randomly assigned to the BMMNC, BMSC, and control groups. Fresh BMMNCs isolated from the iliac crest during surgery and cultured BMSCs at passage four were used in this study. A total of 1 × 10⁷ BMMNCs or BMSCs in 100 µL phosphate-buffered saline were injected into the knee joint immediately after ACLR. The control group was not injected with cells. At two and six weeks post operation, we assessed graft cell repopulation with histological and cell tracking staining (PKH26), and tendon-bone healing with histological micro-computed tomography and immunohistochemical analyses for collagen I and monocyte chemoattractant protein-1 (MCP1). At two weeks post operation, there was no significant difference in the total cell population within the allograft among the three groups. However, the control group showed significantly higher cell population within the allograft than that of BM cell groups at six weeks. Histological examination of proximal tibia revealed that the intra-articular delivered cells infiltrated into the tendon-bone interface. Compared to the control group, the BM cell groups showed broader gaps with interfacial fibrocartilage healing, similar collagen I level, and higher MCP1 expression in the early stage. Micro-CT did not reveal any significant difference among the three groups. BMMNCs and BMSCs had comparable effects on cell repopulation and interfacial allograft-bone healing. Intra-articular BM cells delivery had limited benefits on graft cell repopulation and caused higher inflammation than that in the control group in the early stage, with fibrocartilage formation in the tendon-bone interface after allograft ACLR.

Cell therapy: A potential solution for the healing of bone cavities

Aim

To Explore whether the use of autologous BMMNCs as a cell therapy technique will improve the healing of bone cavities in vivo.

Methodology

After achieving proper anesthesia, mononuclear cells were isolated from iliac crest's bone marrow aspirates (BMMNCs). Then access cavity, root canal preparation, and filling were done in third and fourth premolars, followed by amalgam coronal restoration. After that, a flap was reflected and a standardized bone cavity was drilled, the related root-ends were resected and retrocavity was drilled and filled with MTA. Before repositioning the flap, the bone cavity was filled with the desired filling material according to its corresponding group (n = 8): CollaCote group; where collagen scaffold was used, MNC group; in which CollaCote® loaded with isolated BMMNCs were applied, Biogen group; in which BIO-GEN® graft material was applied and finally Control group; where the bone cavities were left empty to heal spontaneously. Evaluations of healing of the bone cavities were done radiographically and histologically.

Results

The MNC group induced the best healing potential with statistical significant difference from other groups.

Conclusion

cell therapy utilizing autologous BMMNCs looks to beat the conventional therapies and convey a significant improvement in the healing of the bone cavity in vivo.

Efficacy of autologous stem cells for bone regeneration during endosseous dental implants insertion - A systematic review of human studies

Availability of adequate quantity and quality of bone is prerequisite for longevity and survival of endosseous dental implants. Most of the clinicians face with the problem of lack of bone due to long-standing edentulism during this treatment modality. Conventional therapies with the use of various types of bone grafts and membranes have provided clinicians with unpredictable and compromised results. Cell-based therapies utilizing undifferentiated cells, that have the potential to differentiate into various cell types including osteoblastic lineages, have demonstrated through various previously conducted in-vitro and animal studies, a successful formation of bone in a predictable manner. Thus the main objective of this review was to evaluate the effectiveness of these therapies when applied on human subjects. A search was carried out in MEDLINE (via PubMed) and Cochrane CENTRAL databases for completed randomized and non-randomised clinical trials utilizing stem cell-based therapies with histologic and radiographic analysis written in English up to January 2019. This search of the literature yielded 10 studies meeting the inclusion and exclusion criteria. In all these studies, stem cells were primarily used to achieve bone augmentation during insertion of endosseous dental implants. Results of these therapies conducted on human subjects have shown a positive impact on bone regeneration, in particular, therapies utilizing bone marrow and adipose tissue derived stem cells. But the clinicians need to examine the efficacy, safety, feasibility of these therapies while treating large size defects or planning for shorter healing period and early loading of dental implants.

First Human Leucocyte Antigen (HLA) Response and Safety Evaluation of Fibrous Demineralized Bone Matrix in a Critical Size Femoral Defect Model of the Sprague-Dawley Rat

Treatment of large bone defects is one of the great challenges in contemporary orthopedic and traumatic surgery. Grafts are necessary to support bone healing. A well-established allograft is demineralized bone matrix (DBM) prepared from donated human bone tissue. In this study, a fibrous demineralized bone matrix (f-DBM) with a high surface-to-volume ratio has been analyzed for toxicity and immunogenicity. f-DBM was transplanted to a 5-mm, plate-stabilized, femoral critical-size-bone-defect in Sprague-Dawley (SD)-rats. Healthy animals were used as controls. After two months histology, hematological analyses, immunogenicity as well as serum biochemistry were performed. Evaluation of free radical release and hematological and biochemical analyses showed no significant differences between the control group and recipients of f-DBM. Histologically, there was no evidence of damage to liver and kidney and good bone healing was observed in the f-DBM group. Reactivity against human HLA class I and class II antigens was detected with mostly low fluorescence values both in the serum of untreated and treated animals, reflecting rather a background reaction. Taken together, these results provide evidence for no systemic toxicity and the first proof of no basic immunogenic reaction to bone allograft and no sensitization of the recipient.

Introduction of a New Surgical Method to Improve Bone Healing in a Large Bone Defect by Replacement of the Induced Membrane by a Human Decellularized Dermis Repopulated with Bone Marrow Mononuclear Cells in Rat

The Masquelet technique for the treatment of large bone defects is a two-stage procedure based on an induced membrane. We eliminate the first surgical step by using a decellularized dermal skin graft (Epiflex^®) populated with bone marrow mononuclear cells (BMC), as a replacement for the induced membrane. The aim of this study was to demonstrate the feasibility of this technology and provide evidence of equivalent bone healing in comparison to the induced membrane-technique. Therefore, 112 male Sprague–Dawley rats were allocated in six groups and received a 10 mm femoral defect. Defects were treated with either the induced membrane or decellularized dermis, with or without the addition of BMC. Defects were then filled with a scaffold (β-TCP), with or without BMC. After a healing time of eight weeks, femurs were taken for histological, radiological and biomechanical analysis. Defects treated with Epiflex^® showed increased mineralization and bone formation predominantly in the transplanted dermis surrounding the defect. No significant decrease of biomechanical properties was found. Vascularization of the defect could be enhanced by addition of BMC. Considering the dramatic reduction of a patient’s burden by the reduced surgical stress and shortened time of treatment, this technique could have a great impact on clinical practice.

Determination of the effective dose of bone marrow mononuclear cell therapy for bone healing in vivo

Introduction

Cell-based therapy by bone marrow mononuclear cells (BMC) in a large-sized bone defect has already shown improved vascularization and new bone formation. First clinical trials are already being conducted. BMC were isolated from bone marrow aspirate and given back to patients in combination with a scaffold within some hours. However, the optimal concentration of BMC has not yet been determined for bone healing. With this study, we want to determine the optimal dosage of the BMC in the bone defect to support bone healing.

Material and methods

Scaffolds with increasing BMC concentrations were inserted into a 5 mm femoral defect, cell concentrations of 2 × 10⁶ BMC/mL, 1 × 10⁷ BMC/mL and 2 × 10⁷ BMC/mL were used. Based on the initial cell number used to colonize the scaffolds, the groups are designated 1 × 10⁶, 5 × 10⁶ and 1 × 10⁷ group. Bone healing was assessed biomechanically, radiologically (µCT), and histologically after 8 weeks healing time.

Results

Improved bone healing parameters were noted in the 1 × 10⁶ and 5 × 10⁶ BMC groups. A significantly higher BMD was observed in the 1 × 10⁶ BMC group compared to the other groups. Histologically, a significantly increased bone growth in the defect area was observed in group 5 × 10⁶ BMC. This finding could be supported radiologically.

Conclusion

It was shown that the effective dose of BMC for bone defect healing ranges from 2 × 10⁶ BMC/mL to 1 × 10⁷ BMC/mL. This concentration range seems to be the therapeutic window for BMC-supported therapy of large bone defects. However, further studies are necessary to clarify the exact BMC-dose dependent mechanisms of bone defect healing and to determine the therapeutically effective range more precisely.

Predicting Angiogenesis by Endothelial Progenitor Cells Relying on In-Vitro Function Assays and VEGFR-2 Expression Levels

Clinical trials have demonstrated the safety and efficacy of autologous endothelial progenitor cell (EPC) therapy in various diseases. Since EPCs' functions are influenced by genetic, systemic and environmental factors, the therapeutic potential of each individual EPCs is unknown and may affect treatment outcome. Therefore, our aim was to compare EPCs function among healthy donors in order to predict blood vessel formation (angiogenesis) before autologous EPC transplantation. Human EPCs were isolated from the blood of ten volunteers. EPCs proliferation rate, chemoattractant ability, and CXCR4 mRNA levels were different among donors (p < 0.0001, p < 0.01, p < 0.001, respectively). A positive correlation was found between SDF-1, CXCR4, and EPCs proliferation (R = 0.736, p < 0.05 and R = 0.8, p < 0.01, respectively). In-vivo, blood vessels were counted ten days after EPCs transplantation in a subcutaneous mouse model. Mean vessel density was different among donors (p = 0.0001); nevertheless, donors with the lowest vessel densities were higher compared to control (p < 0.05). Finally, using a linear regression model, a mathematical equation was generated to predict blood vessel density relying on: (i) EPCs chemoattractivity, and (ii) VEGFR-2 mRNA levels. Results reveal differences in EPCs functions among healthy individuals, emphasizing the need for a potency assay to pave the way for standardized research and clinical use of human EPCs.

Influence of concentration and preparation of platelet rich fibrin on human bone marrow mononuclear cells (in vitro)

Large bone defects have always been a big challenge. The use of bone marrow mononuclear cells (BMCs) combined with an osteoconductive scaffold has been proved a good alternative for the treatment of large bone defects. Another autologous source for tissue engineering is platelet rich fibrin (PRF). PRF is a blood concentrate system obtained through a one-step centrifugation. The generated 3D matrix of the PRF clot serves as a reservoir of growth factors. Those growth factors might support the regenerative response of BMC, and therefore the effect of PRF, centrifuged with either high medium (208 g) or low (60 g) relative centrifugation force (RCF) on BMCs was evaluated in vitro in the present study. The two PRF matrices obtained were initially characterized and compared to human serum. Significantly increased concentrations of insulin-like growth factor (IGF), soluble intercellular adhesion molecule-1 (sICAM1) and transforming growth factor (TGF)-β were found in PRF compared to human serum whereas VEGF concentration was not significantly altered. A dose-response study revealed no further activation of BMC's metabolic activity, if concentration of both PRF matrices exceeded 10% (v/v). Effect of both PRF preparations [10%] on BMC was analyzed after 2, 7, and 14 days in comparison to human serum [10%]. Metabolic activity of BMC increased significantly in all groups on day 14. Furthermore, gene expression of matrix metalloproteinases (MMP)-2, -7, and -9 was significantly stimulated in BMC cultivated with the respective PRF matrices compared to human serum. Apoptotic activity of BMC incubated with PRF was not altered compared to BMC cultivated with serum. In conclusion, PRF could be used as a growth factor delivery system of autologous or allogeneic source with the capability of stimulating cells such as BMC.

Autologous cell-based therapy for treatment of large bone defects: from bench to bedside

OBJECTIVES

Reconstruction of long segmental bone defects is demanding for patients and surgeons, and associated with long-term treatment periods and substantial complication rates in addition to high costs. While defects up to 4-5 cm length might be filled up with autologous bone graft, heterologous bone from cadavers, or artificial bone graft substitutes, current options to reconstruct bone defects greater than 5 cm consist of either vascularized free bone transfers, the Masquelet technique or the Ilizarov distraction osteogenesis. Alternatively, autologous cell transplantation is an encouraging treatment option for large bone defects as it eliminates problems such as limited autologous bone availability, allogenic bone immunogenicity, and donor-site morbidity, and might be used for stabilizing loose alloplastic implants.

METHODS

The authors show different cell therapies without expansion in culture, with ex vivo expansion and cell therapy in local bone defects, bone healing and osteonecrosis. Different kinds of cells and scaffolds investigated in our group as well as in vivo transfer studies and BMC used in clinical phase I and IIa clinical trials of our group are shown.

RESULTS

Our research history demonstrated the great potential of various stem cell species to support bone defect healing. It was clearly shown that the combination of different cell types is superior to approaches using single cell types. We further demonstrate that it is feasible to translate preclinically developed protocols from in vitro to in vivo experiments and follow positive convincing results into a clinical setting to use autologous stem cells to support bone healing.

Intraoperative Construct Preparation: A Practical Route for Cell-Based Bone Regeneration

Stem cell-based bone tissue engineering based on the combination of a scaffold and expanded autologous mesenchymal stem cells (MSCs) represents the current state-of-the-art treatment for bone defects and fractures. However, the procedure of such construct preparation requires extensive ex vivo manipulation of patient's cells to achieve enough stem cells. Therefore, it is impractical and not cost-effective compared to other therapeutic interventions. For these reasons, a more practical strategy circumventing any ex vivo manipulation and an additional surgery for the patient would be advantageous. Intraoperative concept-based bone tissue engineering, where constructs are prepared with easily accessible autologous cells within the same surgical procedure, allows for such a simplification. In this study, we discuss the concept of intraoperative construct preparation for bone tissue engineering and summarize the available cellular options for intraoperative preparation. Furthermore, we propose methods to prepare intraoperative constructs, and review data of currently available preclinical and clinical studies using intraoperatively prepared constructs for bone regenerative applications. We identify several obstacles hampering the application of this emerging approach and highlight perspectives of technological innovations to advance the future developments of intraoperative construct preparation.

Combining electrical stimulation and tissue engineering to treat large bone defects in a rat model

Bone Tissue engineering (BTE) has recently been introduced as an alternative to conventional treatments for large non-healing bone defects. BTE approaches mimic autologous bone grafts, by combining cells, scaffold, and growth factors, and have the added benefit of being able to manipulate these constituents to optimize healing. Electrical stimulation (ES) has long been used to successfully treat non-healing fractures and has recently been shown to stimulate bone cells to migrate, proliferate, align, differentiate, and adhere to bio compatible scaffolds, all cell behaviors that could improve BTE treatment outcomes. With the above in mind we performed in vitro experiments and demonstrated that exposing Mesenchymal Stem Cells (MSC) + scaffold to ES for 3 weeks resulted in significant increases in osteogenic differentiation. Then in in vivo experiments, for the first time, we demonstrated that exposing BTE treated rat femur large defects to ES for 8 weeks, caused improved healing, as indicated by increased bone formation, strength, vessel density, and osteogenic gene expression. Our results demonstrate that ES significantly increases osteogenic differentiation in vitro and that this effect is translated into improved healing in vivo. These findings support the use of ES to help BTE treatments achieve their full therapeutic potential.

Cultivation of EPC and co-cultivation with MSC on β-TCP granules in vitro is feasible without fibronectin coating but influenced by scaffolds' design

INTRODUCTION

Meanwhile, the osteoconductive properties of frequently used synthetic bone grafts can be improved by the use of osteoinductive cells and growth factors. Nevertheless, the cultivation of endothelial progenitor cells (EPC) seems to be difficult and requires a pre-conditioning of the scaffolds with fibronectin. Additionally, the influence of the scaffolds' design on cell cultivation is not fully elucidated.

METHODS

As scaffold, a commercially available β-tricalcium phosphate was used. 5 × 10⁵ EPC, or 5 × 10⁵ MSC or a combination of each 2.5 × 10⁵ cells was seeded onto the granules. We investigated seeding efficiency, cell morphology, cell metabolism, adherence, apoptosis and gene expression of EPC and MSC in this in vitro study on days 2, 6 and 10.

RESULTS

Total number of adherent cells was higher on the β-TCP without fibronectin coating. The number of cells in all approaches significantly declined when a solid β-TCP was used. Metabolic activity of MSC was comparable throughout the scaffolds and increased until day 10. Additionally, the amount of supernatants VEGF was higher for MSC than for EPC.

DISCUSSION

Our results demonstrate that a coating of the scaffold for successful cultivation of EPC in vitro is not necessary. Furthermore, our study showed that structural differences of the scaffolds significantly influenced cell adherence and metabolic activity. Thereby, the influence on EPC seems to be higher than on MSC.

Stem cell therapy for reconstruction of alveolar cleft and trauma defects in adults: A randomized controlled, clinical trial

BACKGROUND

Stem cell therapy with bone marrow-derived mesenchymal stem cells is a promising tissue engineering strategy to promote regeneration of craniofacial bone.

PURPOSE

To determine whether cell therapy with ex vivo expanded stem cell populations would be safe and efficacious in the regeneration of large alveolar defects in patients with a history of cleft palate or craniofacial trauma.

MATERIALS AND METHODS

Eighteen patients (10 patients with traumatic injury and 8 patients with cleft palate) presenting with missing teeth associated with horizontal alveolar bone deficiencies were included in this randomized controlled clinical trial. Patients were randomized to receive either conventional autogenous block grafts or stem cell therapy. After a healing period of 4 months the treated sites were re-entered and the bone width re-assessed prior to implant placement. Implant stability was evaluated through torque testing of the implant upon insertion and at 6 months postloading.

RESULTS

The mean gain in bone width was 1.5 ± 1.5 mm in the stem cell therapy group and 3.3 ± 1.4 mm in the control group. Overall, bone gain was higher in trauma patients as compared to patients with cleft palate, for both the control and the stem cell therapy groups. Most postoperative complications were wound dehiscences and incision line openings. Implants were placed successfully in 5 out of 10 patients in the stem cell therapy group and in all 8 patients in the control group. One implant from the control/cleft palate group failed before loading, while the rest of the implants were loaded successfully and remained stable at 6 months. The patients who did not receive implants were re-treated with autogenous block bone graft.

CONCLUSION

The ability of stem cells to treat large alveolar defects is safe, yet, their ability to completely reconstitute large alveolar defects is limited. This approach requires further optimization to meet the outcomes seen using current methods to treat large defects, particularly those resultant of cleft palate.

Safety and feasibility of cell-based therapy of autologous bone marrow-derived mononuclear cells in plate-stabilized proximal humeral fractures in humans

Background

Local implantation of ex vivo concentrated, washed and filtrated human bone marrow-derived mononuclear cells (BMC) seeded onto β-tricalciumphosphate (TCP) significantly enhanced bone healing in a preclinical segmental defect model. Based on these results, we evaluated in a first clinical phase-I trial safety and feasibility of augmentation with preoperatively isolated autologous BMC seeded onto β-TCP in combination with angle stable plate fixation for the therapy of proximal humeral fractures as a potential alternative to autologous bone graft from the iliac crest.

Methods

10 patients were enrolled to assess whether cell therapy with 1.3 × 10⁶ autologous BMC/ml/ml β-TCP, collected on the day preceding the definitive surgery, is safe and feasible when seeded onto β-TCP in patients with a proximal humeral fracture. 5 follow-up visits for clinical and radiological controls up to 12 weeks were performed.

Results

β-tricalciumphosphate fortification with BMC was feasible and safe; specifically, neither morbidity at the harvest site nor at the surgical wound site were observed. Neither local nor systemic inflammation was noted. All fractures healed within the observation time without secondary dislocation. Three adverse events were reported: one case each of abdominal wall shingles, tendon loosening and initial screw perforation, none of which presumed related to the IND.

Conclusions

Cell therapy with autologous BMC for bone regeneration appeared to be safe and feasible with no drug-related adverse reactions being described to date. The impression of efficacy was given, although the study was not powered nor controlled to detect such. A clinical trial phase-II will be forthcoming in order to formally test the clinical benefit of BMC-laden β-TCP for PHF patients.

Trial registration The study was registered in the European Clinical Trial Register as EudraCT No. 2012-004037-17. Date of registration 30th of August 2012. Informed consent was signed from all patients enrolled.

The effect of synthetic α-tricalcium phosphate on osteogenic differentiation of rat bone mesenchymal stem cells

The reconstruction of large bone defects has been the focus in bone tissue engineering research. By acting as synthetic frameworks for cell growth and tissue formation, biomaterials can play a critical role in bone tissue engineering. Among various biomaterials, calcium phosphate based materials include hydroxyapatite (HA), α-tricalcium phosphate (α-TCP), and β-tricalcium phosphate (β-TCP) are widely used as scaffold materials in bone tissue engineering. However, little is known about the effect of α-TCP alone on the osteogenic differentiation of the BMSCs. To this end, we synthesized α-TCP using a novel co-precipitation method. The synthetic α-TCP was then incubated with rat BMSCs under osteogenic inductive medium culture conditions, followed by the analysis of the mRNA levels of various osteogenesis-related genes, including ALP, Rux2, COL-I, and SP7, using a quantitative RT-PCR method. Following incubation of BMSCs with 20 μg/ml α-TCP, cells reached confluency after 7 days. Additionally, the MTT analysis showed that α-TCP at concentration of 10-20 μg/ml had good biocompatibility with BMSCs, showing no significant inhibition of rat BMSCs proliferation. Furthermore, the synthetic α-TCP (20 μg/ml), when incubated with rat BMSCs in the osteogenic culture medium, increased the mRNA levels of various osteogenesis-related genes, including ALP, Rux2, COL-I, and SP7. Finally, treatment of synthetic α-TCP (20 μg/ml) potentiated calcium nodule formations after incubation with rat BMSCs in osteogenic culture medium for 21 days, as compared with non-treated control. Taken together, the results in the present study suggested that α-TCP alone likely promotes rat BMSCs osteogenic differentiation through up-regulating ALP, Col-I, Runx2, and SP7 gene expression.

Cell-based therapy by implanted human bone marrow-derived mononuclear cells improved bone healing of large bone defects in rats

QUESTION/AIM: Cell-based therapy by cultivated stem cells (mesenchymal stem cells [MSC] and endothelial progenitor cells [EPC]) in a large-sized bone defect has already shown improved vascularization and new bone formation. However, these methods are clinically afflicted with disadvantages. Another heterogeneous bone marrow cell population, the so-called human bone marrow-derived mononuclear cells (BMC), has nevertheless been used clinically and showed improved vascularization in ischemic limbs or in the myocardium. For clinical use, a certified process has been established; thus, BMC were isolated from bone marrow aspirate by density gradient centrifugation, washed, cleaned, and given back to patients within several hours. This investigation tested the ability of human BMC seeded on beta-tricalcium phosphate (β-TCP) and placed into a large bone defect in rats to improve the bone healing process in vivo.

METHODS

Human EPC were isolated from buffy coat, and MSC or BMC, respectively, were isolated from bone marrow aspirate by density gradient centrifugation. 1.0×10(6) cells were loaded onto 750 μL β-TCP (0.7-1.4 mm). Large femoral defects (6 mm) in athymic rats were created surgically and stabilized with an internal fixateur. The remaining defects were filled with β-TCP granules alone (group 1), β-TCP+EPC/MSC (group 2), or β-TCP+BMC (group 3). After 8 weeks, histomorphometric analysis (new bone formation), radiological microcomputer tomography analysis (bony bridging), and biomechanical testing (three-point bending) were achieved. Moreover, a tumorigenicity study was performed to evaluate the safety of BMC implantation after 26 weeks. For statistical analysis, the Kruskal-Wallis test was used.

RESULTS

Eight weeks after implantation of EPC/MSC or BMC, respectively, we detected a more significant new bone formation compared to control. In group 2 and 3, bony bridging of the defect was seen. In the control group, more chondrocytes and osteoid were detected. In the BMC and EPC/MSC group, respectively, less chondrocytes and a significantly more advanced bone formation were observed. The biomechanical stability of the bone regenerate was significantly enhanced if BMC and EPC/MSC, respectively, were implanted compared to control. Moreover, no tumor formation was detected either macroscopically or histologically after 26 weeks of BMC implantation.

DISCUSSION

Implanted BMC suggest that a heterogeneous cell population may provide a powerful cellular therapeutic strategy for bone healing in a large bone defect in humans.