Performance evaluation of a continuous glucose monitoring system under conditions similar to daily life

Clinical Performance Evaluation of Continuous Glucose Monitoring Systems: A Scoping Review and Recommendations for Reporting

The use of different approaches for design and results presentation of studies for the clinical performance evaluation of continuous glucose monitoring (CGM) systems has long been recognized as a major challenge in comparing their results. However, a comprehensive characterization of the variability in study designs is currently unavailable. This article presents a scoping review of clinical CGM performance evaluations published between 2002 and 2022. Specifically, this review quantifies the prevalence of numerous options associated with various aspects of study design, including subject population, comparator (reference) method selection, testing procedures, and statistical accuracy evaluation. We found that there is a large variability in nearly all of those aspects and, in particular, in the characteristics of the comparator measurements. Furthermore, these characteristics as well as other crucial aspects of study design are often not reported in sufficient detail to allow an informed interpretation of study results. We therefore provide recommendations for reporting the general study design, CGM system use, comparator measurement approach, testing procedures, and data analysis/statistical performance evaluation. Additionally, this review aims to serve as a foundation for the development of a standardized CGM performance evaluation procedure, thereby supporting the goals and objectives of the Working Group on CGM established by the Scientific Division of the International Federation of Clinical Chemistry and Laboratory Medicine.

Wearable flexible body matched electromagnetic sensors for personalized non-invasive glucose monitoring

This work introduces novel body-matched, vasculature-inspired, quasi-antenna-arrays that act as electromagnetic sensors to instantaneously, continuously, and wirelessly sense glucose variations in the bloodstream. The proposed sensors are personalized, leverage electromagnetic waves, and are coupled with a custom machine-learning-based signal-processing module. These sensors are flexible, and embedded in wearable garments such as socks, which provide conformity to curved skin surfaces and movement resilience. The entire wearable system is calibrated against temperature, humidity, and movement resulting in high accuracy in glucose variations tracking. In-Vivo experiments on diabetic rats and pigs exhibit a 100% diagnostic accuracy over a wide range of glucose variations. Human trials on patients with diabetes and healthy individuals reveal a clinical accuracy of continuous glucose monitoring of 99.01% in twenty-eight subjects who underwent Oral Glucose Tolerance Tests. Hence, our approach ensures the continuous tracking of glucose variations from hypo-to-hyper glycemic levels with great fidelity.

Comparison of the clinical effects of intermittently scanned and real-time continuous glucose monitoring in children and adolescents with type 1 diabetes: A retrospective cohort study

AIMS

/Introduction The aim of the study was to compare two continuous glucose monitoring (CGM) systems, intermittently scanned CGM (isCGM) and real-time CGM (rtCGM), to determine which system achieved better glycemic control in pediatric patients.

MATERIALS AND METHODS

We conducted a retrospective cohort study of children and adolescents with type 1 diabetes and compared the time in range (TIR) (70-180 mg/dL), time below range (TBR) (< 70 mg/dL), and time above range (TAR) (> 180 mg/dL), and estimated HbA1c (eA1c) levels between patients on isCGM and rtCGM.

RESULTS

Of the 112 participants, 76 (67.9%) used isCGM and 36 (32.1%) used rtCGM for glycemic management. Patients on rtCGM had significantly greater TIR (57.7% ± 12.3% vs. 52.3% ± 12.3%, P = 0.0368), and had significantly lower TBR (4.3% ± 2.7% vs. 10.2% ± 5.4%, P < 0.001) than those on isCGM but there was no significant difference in the TAR (37.4% ± 12.9% vs. 38.0% ± 12.5%, P = 0.881) or the eA1c levels (7.4% ± 0.9% vs. 7.5% ± 0.8%, P = 0.734) between the two groups.

CONCLUSIONS

Pediatric patients with type 1 diabetes on rtCGM also showed more beneficial effects for increase of TIR with notably reduction of TBR than those on isCGM. Real-time CGM may provide better glycemic control than isCGM in children with type 1 diabetes.

Enhancing the Accuracy of Non-Invasive Glucose Sensing in Aqueous Solutions Using Combined Millimeter Wave and Near Infrared Transmission

We reported measurement results relating to non-invasive glucose sensing using a novel multiwavelength approach that combines radio frequency and near infrared signals in transmission through aqueous glucose-loaded solutions. Data were collected simultaneously in the 37–39 GHz and 900–1800 nm electromagnetic bands. We successfully detected changes in the glucose solutions with varying glucose concentrations between 80 and 5000 mg/dl. The measurements showed for the first time that, compared to single modality systems, greater accuracy on glucose level prediction can be achieved when combining transmission data from these distinct electromagnetic bands, boosted by machine learning algorithms.

Continuous glucose monitoring in subjects undergoing bariatric surgery: Diurnal and nocturnal glycemic patterns

BACKGROUND AND AIMS

Although the use of Continuous Glucose Monitoring (CGM) is rapidly extending, little evidence is currently available on daily glycemic excursions after different bariatric procedures. We assessed glycemic patterns after sleeve gastrectomy (SG) and roux-en-Y gastric bypass (RYGB) using CGM.

METHODS AND RESULTS

Cross-sectional study in subjects who had undergone RYGB (n = 22) or SG (n = 29) since at least 1 year, without pre-surgery or in current diabetes (T2DM) remission. All subjects underwent 7 day-CGM (Dexcom G4 PLATINUM), which provides glucose variability (GV), number and time spent in hypoglycemia, hypoglycemia patterns (postprandial, nocturnal or mixed). All indexes of GV were higher after RYGB than after SG (p < 0.001). Twenty-eight (55%) subjects experienced hypoglycemia. The number of events was higher after RYGB than SG (p = 0.017) while it did not differ in subjects with or without pre-surgery T2DM (p = 0.129). Overall, 9 (32%) subjects presented hypoglycemia exclusively during the postprandial period, 8 (29%) an exclusively nocturnal pattern and 11 (39%) a mixed pattern. The nocturnal pattern was more frequent after SG than RYGB (53.8% vs 6.7%, p = 0.036) while no difference was observed in subjects with or without pre-surgery T2DM (p = 0.697). Hypoglycemia symptoms were more frequent in subjects with postprandial than in those with nocturnal pattern (77.8% vs 12.5%, p = 0.015).

CONCLUSIONS

RYGB is characterized by a greater GV and a higher number of hypoglycemia events mostly post-prandial and symptomatic, while SG is associated with nocturnal and often asymptomatic hypoglycemia. These findings suggest that post-bariatric hypoglycemia is a more complex, not exclusively, postprandial phenomenon.

Noninvasive, wearable, and tunable electromagnetic multisensing system for continuous glucose monitoring, mimicking vasculature anatomy

Painless, needle-free, and continuous glucose monitoring sensors are needed to enhance the life quality of diabetic patients. To that extent, we propose a first-of-its-kind, highly sensitive, noninvasive continuous glycemic monitoring wearable multisensor system. The proposed sensors are validated on serum, animal tissues, and animal models of diabetes and in a clinical setting. The noninvasive measurement results during human trials reported high correlation (>0.9) between the system's physical parameters and blood glucose levels, without any time lag. The accurate real-time responses of the sensors are attributed to their unique vasculature anatomy-inspired tunable electromagnetic topologies. These wearable apparels wirelessly sense hypo- to hyperglycemic variations with high fidelity. These components are designed to simultaneously target multiple body locations, which opens the door for the development of a closed-loop artificial pancreas.

Benefits and Limitations of MARD as a Performance Parameter for Continuous Glucose Monitoring in the Interstitial Space

High-quality performance of medical devices for glucose monitoring is important for a safe and efficient usage of this diagnostic option by patients with diabetes. The mean absolute relative difference (MARD) parameter is used most often to characterize the measurement performance of systems for continuous glucose monitoring (CGM). Calculation of this parameter is relatively easy and comparison of the MARD numbers between different CGM systems appears to be straightforward on the first glance. However, a closer look reveals that a number of complex aspects make interpretation of the MARD numbers provided by the manufacturer for their CGM systems difficult. In this review, these aspects are discussed and considerations are made for a systematic and appropriate evaluation of the MARD in clinical trials. The MARD should not be used as the sole parameter to characterize CGM systems, especially when it comes to nonadjunctive usage of such systems.

Novel Single-Site Device for Conjoined Glucose Sensing and Insulin Infusion: Performance Evaluation in Diabetes Patients During Home-Use

OBJECTIVE

This study evaluated a novel diabetes treatment device that combines commercially available continuous glucose monitoring and insulin infusion technology in such a way as to perform insulin delivery and glucose sensing through a single skin insertion site (single-port device).

METHODS

Ten type 1 diabetes patients used the device for up to six days in their home/work environment for open-loop insulin delivery and glucose sensing. On an additional day, the device was used in combination with an algorithm to perform automated closed-loop glucose control under hospital settings. To assess the performance of the device, capillary blood glucose concentrations were frequently determined and a continuous glucose sensor was additionally worn by the patients.

RESULTS

The average mean absolute relative deviation from blood glucose concentrations obtained for the sensor of the device was low (median, 13.0%; interquartile range, 10.5-16.7%; n = 10) and did not differ from that of the additionally worn glucose sensor (versus 13.9%; 11.9-15.3%; P = 0.922). Furthermore, insulin delivery with the single-port device was reliable and safe during home use and, when performed in combination with the control algorithm, was adequate to achieve and maintain near normoglycemia.

CONCLUSION

Our data show the feasibility of open- and closed-loop glucose control in diabetes patients using a device that combines insulin delivery and glucose sensing at a single tissue site.

SIGNIFICANCE

The reduction in device size and invasiveness achieved by this design may largely increase patient convenience and enhance acceptance of diabetes treatment with continuous glucose monitoring and insulin delivery technology.

Comparison of Continuous Glucose Monitoring Accuracy Between Abdominal and Upper Arm Insertion Sites

Background: The aim was to compare the accuracy of the Dexcom^® G4 Platinum continuous glucose monitor (CGM) sensor inserted on the upper arm and the abdomen in adults. Methods: Fourteen adults with type 1 diabetes wore two CGMs, one placed on the upper arm and one placed on the abdomen. Three in-clinic visits of 5 h with YSI (2300 STAT, Yellow Springs Instrument) measurements as comparator were performed. Each visit was followed by 4 days with seven-point self-monitoring of blood glucose (SMBG) in free-living conditions. Accuracy analyses on the paired CGM-YSI and CGM-SMBG measurements of the two CGM sensors were performed. Results: Using YSI as comparator, the overall Mean Absolute Relative Difference (MARD) for the CGM_abd was 12.3% and CGM_arm was 12.0%. The percentage of the CGM measurements in zone A of Clarke error grid analysis for the CGM_abd was 85.6% and CGM_arm was 86.0%. The hypoglycemia sensitivity for the CGM_abd and CGM_arm was 69.3%. Using SMBG as comparator, the overall MARD for the CGM_abd was 12.5% and CGM_arm was 12.0%. The percentage of the CGM measurements in zone A for the CGM_abd was 84.1% and the CGM_arm was 85.0%. The hypoglycemia sensitivity for the CGM_abd was 60.0% and the CGM_arm was 71.1%. All the P-values from the comparisons between the accuracy of CGM_abd and CGM_arm were >0.05. Conclusion: The accuracy of a Dexcom G4 Platinum CGM sensor placed on the upper arm was not different from the accuracy of the sensor placed on the abdomen in adults with type 1 diabetes.

Measurement Performance of Two Continuous Tissue Glucose Monitoring Systems Intended for Replacement of Blood Glucose Monitoring

BACKGROUND

Currently, two systems for continuous tissue glucose monitoring (CGM) (Dexcom^® G5 [DG5] and FreeStyle Libre [FL]) are intended to replace blood glucose monitoring (BGM) and, according to manufacturer labeling, are distributed as such in some jurisdictions, including the United States and the European Union.

METHODS

The measurement performance of these two systems in comparison with a BGM system was analyzed in a 14-day study with 20 participants comprising study site visits, which included phases of induced rapid glucose changes, and home use phases. Performance analysis was mainly based on deviations between CGM readings and BGM results. Sensor-to-sensor precision was also analyzed.

RESULTS

Approximately 25% of DG5 and FL results showed differences from BGM results exceeding 15 mg/dL or 15% (at glucose concentration below or above 100 mg/dL, respectively) at times of therapeutic decisions, and ∼5% of differences exceeded 30 mg/dL or 30%. Performance was different depending on the setting (study site visits, home use phases, and phases of induced rapid glucose changes). In consensus error grid (CEG) analysis, both systems showed >99.5% of results within the clinically acceptable zones A and B.

CONCLUSIONS

In this study, both systems showed deviations from blood glucose (BG) measurements, the current standard approach in diabetes therapy. Although a large percentage of results was found in CEG zones A and B, for approximately one in four therapeutic decisions, CGM and BG readings differed by at least 15 mg/dL or 15%. Such deviations should be taken into account when using CGM systems.

Limits to the Evaluation of the Accuracy of Continuous Glucose Monitoring Systems by Clinical Trials

Systems for continuous glucose monitoring (CGM) are evolving quickly, and the data obtained are expected to become the basis for clinical decisions for many patients with diabetes in the near future. However, this requires that their analytical accuracy is sufficient. This accuracy is usually determined with clinical studies by comparing the data obtained by the given CGM system with blood glucose (BG) point measurements made with a so-called reference method. The latter is assumed to indicate the correct value of the target quantity. Unfortunately, due to the nature of the clinical trials and the approach used, such a comparison is subject to several effects which may lead to misleading results. While some reasons for the differences between the values obtained with CGM and BG point measurements are relatively well-known (e.g., measurement in different body compartments), others related to the clinical study protocols are less visible, but also quite important. In this review, we present a general picture of the topic as well as tools which allow to correct or at least to estimate the uncertainty of measures of CGM system performance.

A Personalized Week-to-Week Updating Algorithm to Improve Continuous Glucose Monitoring Performance

BACKGROUND

Continuous glucose monitoring (CGM) systems are increasingly becoming essential components in type 1 diabetes mellitus (T1DM) management. Current CGM technology requires frequent calibration to ensure accurate sensor performance. The accuracy of these systems is of great importance since medical decisions are made based on monitored glucose values and trends.

METHODS

In this work, we introduce a calibration strategy that is augmented with a weekly updating feature. During the life cycle of the sensor, the calibration mechanism periodically estimates the parameters of a calibration model to fit self-monitoring blood glucose (SMBG) measurements. At the end of each week of use, an optimization problem that minimizes the sum of squared residuals between past reference and predicted blood glucose values is solved remotely to identify personalized calibration parameters. The newly identified parameters are used to initialize the calibration mechanism of the following week.

RESULTS

The proposed method was evaluated using two sets of clinical data both consisting of 6 weeks of Dexcom G4 Platinum CGM data on 10 adults with T1DM (over 10 000 hours of CGM use), with seven SMBG data points per day measured by each subject in an unsupervised outpatient setting. Updating the calibration parameters using the history of calibration data indicated a positive trend of improving CGM performance.

CONCLUSIONS

Although not statistically significant, the updating framework showed a relative improvement of CGM accuracy compared to the non-updating, static calibration method. The use of information collected for longer periods is expected to improve the performance of the sensor over time.

Extensive Assessment of Blood Glucose Monitoring During Postprandial Period and Its Impact on Closed-Loop Performance

BACKGROUND

Closed-loop (CL) systems aims to outperform usual treatments in blood glucose control and continuous glucose monitors (CGM) are a key component in such systems. Meals represents one of the main disturbances in blood glucose control, and postprandial period (PP) is a challenging situation for both CL system and CGM accuracy.

METHODS

We performed an extensive analysis of sensor's performance by numerical accuracy and precision during PP, as well as its influence in blood glucose control under CL therapy.

RESULTS

During PP the mean absolute relative difference (MARD) for both sensors presented lower accuracy in the hypoglycemic range (19.4 ± 12.8%) than in other ranges (12.2 ± 8.6% in euglycemic range and 9.3 ± 9.3% in hyperglycemic range). The overall MARD was 12.1 ± 8.2%. We have also observed lower MARD for rates of change between 0 and 2 mg/dl. In CL therapy, the 10 trials with the best sensor spent less time in hypoglycemia (PG < 70 mg/dl) than the 10 trials with the worst sensors (2 ± 7 minutes vs 32 ± 38 minutes, respectively).

CONCLUSIONS

In terms of accuracy, our results resemble to previously reported. Furthermore, our results showed that sensors with the lowest MARD spent less time in hypoglycemic range, indicating that the performance of CL algorithm to control PP was related to sensor accuracy.

Analysis of the Accuracy and Performance of a Continuous Glucose Monitoring Sensor Prototype: An In-Silico Study Using the UVA/PADOVA Type 1 Diabetes Simulator

BACKGROUND

Computer simulation has been shown over the past decade to be a powerful tool to study the impact of medical devices characteristics on clinical outcomes. Specifically, in type 1 diabetes (T1D), computer simulation platforms have all but replaced preclinical studies and are commonly used to study the impact of measurement errors on glycemia.

METHOD

We use complex mathematical models to represent the characteristics of 3 continuous glucose monitoring systems using previously acquired data. Leveraging these models within the framework of the UVa/Padova T1D simulator, we study the impact of CGM errors in 6 simulation scenarios designed to generate a wide variety of glycemic conditions. Assessment of the simulated accuracy of each different CGM systems is performed using mean absolute relative deviation (MARD) and precision absolute relative deviation (PARD). We also quantify the capacity of each system to detect hypoglycemic events.

RESULTS

The simulated Roche CGM sensor prototype (RCGM) outperformed the 2 alternate systems (CGM-1 & CGM-2) in accuracy (MARD = 8% vs 11.4% vs 18%) and precision (PARD = 6.4% vs 9.4% vs 14.1%). These results held for all studied glucose and rate of change ranges. Moreover, it detected more than 90% of hypoglycemia, with a mean time lag less than 4 minutes (CGM-1: 86%/15 min, CGM-2: 57%/24 min).

CONCLUSION

The RCGM system model led to strong performances in these simulation studies, with higher accuracy and precision than alternate systems. Its characteristics placed it firmly as a strong candidate for CGM based therapy, and should be confirmed in large clinical studies.

An experimental study of the intrinsic stability of random forest variable importance measures

Background

The stability of Variable Importance Measures (VIMs) based on random forest has recently received increased attention. Despite the extensive attention on traditional stability of data perturbations or parameter variations, few studies include influences coming from the intrinsic randomness in generating VIMs, i.e. bagging, randomization and permutation. To address these influences, in this paper we introduce a new concept of intrinsic stability of VIMs, which is defined as the self-consistence among feature rankings in repeated runs of VIMs without data perturbations and parameter variations. Two widely used VIMs, i.e., Mean Decrease Accuracy (MDA) and Mean Decrease Gini (MDG) are comprehensively investigated. The motivation of this study is two-fold. First, we empirically verify the prevalence of intrinsic stability of VIMs over many real-world datasets to highlight that the instability of VIMs does not originate exclusively from data perturbations or parameter variations, but also stems from the intrinsic randomness of VIMs. Second, through Spearman and Pearson tests we comprehensively investigate how different factors influence the intrinsic stability.

Results

The experiments are carried out on 19 benchmark datasets with diverse characteristics, including 10 high-dimensional and small-sample gene expression datasets. Experimental results demonstrate the prevalence of intrinsic stability of VIMs. Spearman and Pearson tests on the correlations between intrinsic stability and different factors show that #feature (number of features) and #sample (size of sample) have a coupling effect on the intrinsic stability. The synthetic indictor, #feature/#sample, shows both negative monotonic correlation and negative linear correlation with the intrinsic stability, while OOB accuracy has monotonic correlations with intrinsic stability. This indicates that high-dimensional, small-sample and high complexity datasets may suffer more from intrinsic instability of VIMs. Furthermore, with respect to parameter settings of random forest, a large number of trees is preferred. No significant correlations can be seen between intrinsic stability and other factors. Finally, the magnitude of intrinsic stability is always smaller than that of traditional stability.

Conclusion

First, the prevalence of intrinsic stability of VIMs demonstrates that the instability of VIMs not only comes from data perturbations or parameter variations, but also stems from the intrinsic randomness of VIMs. This finding gives a better understanding of VIM stability, and may help reduce the instability of VIMs. Second, by investigating the potential factors of intrinsic stability, users would be more aware of the risks and hence more careful when using VIMs, especially on high-dimensional, small-sample and high complexity datasets.

AMERICAN ASSOCIATION OF CLINICAL ENDOCRINOLOGISTS AND AMERICAN COLLEGE OF ENDOCRINOLOGY 2016 OUTPATIENT GLUCOSE MONITORING CONSENSUS STATEMENT

This document represents the official position of the American Association of Clinical Endocrinologists and American College of Endocrinology. Where there were no randomized controlled trials or specific U.S. FDA labeling for issues in clinical practice, the participating clinical experts utilized their judgment and experience. Every effort was made to achieve consensus among the committee members. Position statements are meant to provide guidance, but they are not to be considered prescriptive for any individual patient and cannot replace the judgment of a clinician.

Rate-of-Change Dependence of the Performance of Two CGM Systems During Induced Glucose Swings

INTRODUCTION

The accuracy of continuous glucose monitoring (CGM) systems is often assessed with respect to blood glucose (BG) readings. CGM readings are affected by a physiological and a technical time delay when compared to BG readings. In this analysis, the dependence of CGM performance parameters on the BG rate of change was investigated for 2 CGM systems.

METHODS

Data from a previously published study were retrospectively analyzed. An established CGM system (Dexcom G4, Dexcom, San Diego, CA; system A) and a prototype system (Roche Diagnostics GmbH, Mannheim, Germany; system B) with 2 sensors each were worn by 10 subjects in parallel. Glucose swings were induced to achieve rapidly changing BG concentrations. Mean absolute relative differences (MARD) were calculated in different BG rate-of-change categories. In addition, sensor-to-sensor precision was assessed.

RESULTS

At BG rates of change of -1 mg/dl/min to 0 mg/dl/min and 0 mg/dl/min to +1 mg/dl/min, MARD results were 12.6% and 11.3% for system A and 8.2% and 10.0% for system B. At rapidly changing BG concentrations (<-3 mg/dl/min and ≥+3 mg/dl/min), higher MARD results were found for both systems, but system B was less affected (system A: 24.9% and 29.6%, system B: 10.6% and 16.3%). The impact of rate of change on sensor-to-sensor precision was less pronounced.

CONCLUSIONS

Both systems were affected by rapidly changing BG concentrations to some degree, although system B was mostly unaffected by decreasing BG concentrations. It would seem that technological advancements in CGM systems might allow for a more precise tracking of BG concentrations even at rapidly changing BG concentrations.

Assessing sensor accuracy for non-adjunct use of continuous glucose monitoring

BACKGROUND

The level of continuous glucose monitoring (CGM) accuracy needed for insulin dosing using sensor values (i.e., the level of accuracy permitting non-adjunct CGM use) is a topic of ongoing debate. Assessment of this level in clinical experiments is virtually impossible because the magnitude of CGM errors cannot be manipulated and related prospectively to clinical outcomes.

MATERIALS AND METHODS

A combination of archival data (parallel CGM, insulin pump, self-monitoring of blood glucose [SMBG] records, and meals for 56 pump users with type 1 diabetes) and in silico experiments was used to "replay" real-life treatment scenarios and relate sensor error to glycemic outcomes. Nominal blood glucose (BG) traces were extracted using a mathematical model, yielding 2,082 BG segments each initiated by insulin bolus and confirmed by SMBG. These segments were replayed at seven sensor accuracy levels (mean absolute relative differences [MARDs] of 3-22%) testing six scenarios: insulin dosing using sensor values, threshold, and predictive alarms, each without or with considering CGM trend arrows.

RESULTS

In all six scenarios, the occurrence of hypoglycemia (frequency of BG levels ≤50 mg/dL and BG levels ≤39 mg/dL) increased with sensor error, displaying an abrupt slope change at MARD =10%. Similarly, hyperglycemia (frequency of BG levels ≥250 mg/dL and BG levels ≥400 mg/dL) increased and displayed an abrupt slope change at MARD=10%. When added to insulin dosing decisions, information from CGM trend arrows, threshold, and predictive alarms resulted in improvement in average glycemia by 1.86, 8.17, and 8.88 mg/dL, respectively.

CONCLUSIONS

Using CGM for insulin dosing decisions is feasible below a certain level of sensor error, estimated in silico at MARD=10%. In our experiments, further accuracy improvement did not contribute substantively to better glycemic outcomes.

Clinical accuracy of a continuous glucose monitoring system with an advanced algorithm

We assessed the performance of a modified Dexcom G4 Platinum system with an advanced algorithm, in comparison with frequent venous samples measured on a laboratory reference (YSI) during a clinic session and in comparison to self-monitored blood glucose (SMBG) during home use. Fifty-one subjects with diabetes were enrolled in a prospective multicenter study. Subjects wore 1 sensor for 7-day use and participated in one 12-hour in-clinic session on day 1, 4, or 7 to collect YSI reference venous glucose every 15 minutes and capillary SMBG test every 30 minutes. Carbohydrate consumption and insulin dosing and timing were manipulated to obtain data in low and high glucose ranges. In comparison with the laboratory reference method (n = 2,263) the system provided a mean and median absolute relative differences (ARD) of 9.0% and 7.0%, respectively. The mean absolute difference for CGM was 6.4 mg/dL when the YSIs were within hypoglycemia ranges (≤ 70 mg/dL). The percentage in the clinically accurate Clarke error grid A zone was 92.4% and in the benign error B zone was 7.1%. Majority of the sensors (73%) had an aggregated MARD in reference to YSI ≤ 10%. The MARD of CGM-SMBG for home use was 11.3%. The study showed that the point and rate accuracy, clinical accuracy, reliability, and consistency over the duration of wear and across glycemic ranges were superior to current commercial real-time CGM systems. The performance of this CGM is reaching that of a self-monitoring blood glucose meter in real use environment.

Use of microdialysis-based continuous glucose monitoring to drive real-time semi-closed-loop insulin infusion

Continuous glucose monitoring (CGM) and automated insulin delivery may make diabetes management substantially easier, if the quality of the resulting therapy remains adequate. In this study, a semi-closed-loop control algorithm was used to drive insulin therapy and its quality was compared to that of subject-directed therapy. Twelve subjects stayed at the study site for approximately 70 hours and were provided with the investigational Automated Pancreas System Test Stand (APS-TS), which was used to calculate insulin dosage recommendations automatically. These recommendations were based on microdialysis CGM values and common diabetes therapy parameters. For the first half of their stay, the subjects directed their diabetes therapy themselves, whereas for the second half, the insulin recommendations were delivered by the APS-TS (so-called algorithm-driven therapy). During subject-directed therapy, the mean glucose was 114 mg/dl compared to 125 mg/dl during algorithm-driven therapy. Time in target (90 to 150 mg/dl) was approximately 46% during subject-directed therapy and approximately 58% during algorithm-driven therapy. When subjects directed their therapy, approximately 2 times more hypoglycemia interventions (oral administration of carbohydrates) were required than during algorithm-driven therapy. No hyperglycemia interventions (delivery of addition insulin) were necessary during subject-directed therapy, while during algorithm-driven therapy, 2 hyperglycemia interventions were necessary. The APS-TS was able to adequately control glucose concentrations in the subjects. Time in target was at least comparable or moderately higher during closed-loop control and markedly fewer hypoglycemia interventions were required, thus increasing patient safety.

The artificial pancreas: current status and future prospects in the management of diabetes

Recent advances in insulins, insulin pumps, continuous glucose-monitoring systems, and control algorithms have resulted in an acceleration of progress in the development of artificial pancreas devices. This review discusses progress in the development of external systems that are based on subcutaneous drug delivery and subcutaneous continuous glucose monitoring. There are two major system-level approaches to achieving closed-loop control of blood glucose in diabetic individuals. The unihormonal approach uses insulin to reduce blood glucose and relies on complex safety mitigation algorithms to reduce the risk of hypoglycemia. The bihormonal approach uses both insulin to lower blood glucose and glucagon to raise blood glucose, and also relies on complex algorithms to provide for safety of the user. There are several major strategies for the design of control algorithms and supervision control for application to the artificial pancreas: proportional-integral-derivative, model predictive control, fuzzy logic, and safety supervision designs. Advances in artificial pancreas research in the first decade of this century were based on the ongoing computer revolution and miniaturization of electronic technology. The advent of modern smartphones has created the ability to utilize smartphone technology as the engineering centerpiece of an artificial pancreas. With these advances, an artificial or bionic pancreas is within reach.

The impact of continuous glucose monitoring on low interstitial glucose values and low blood glucose values assessed by point-of-care blood glucose meters: results of a crossover trial

In a randomized crossover trial the impact of continuous glucose monitoring (CGM) was tested on the occurrence of low blood glucose values measured by point of care (POC) measurement and on low glucose values measured by CGM in the interstitial fluid. A total of 41 type 1 diabetic patients (age 42.0 ± 11.4 years, diabetes duration 15.3 ± 10.1 years, A1c 8.2 ± 1.4%) used a CGM system (Dexcom SEVEN PLUS system) twice. In first study phase (CGM blind), patients were blind regarding the CGM current glucose levels and were not alerted when critical glucose values were reached. In the second phase (CGM real time), patients had access to current glucose levels and were alerted if critical glucose values were reached. During CGM real time the proportion of hypoglycemic POC blood glucose values were significantly reduced (7.5 ± 5.6% vs 10.1 ± 7.5%; P = .04), whereas the proportion of euglycemic blood glucose values were significantly enhanced (73.7 ± 18.3% vs 68.3 ± 12.1%; P = .01). The duration of low glucose periods in the interstitial fluid was significantly lower in the CGM real time phase (125 ± 89 vs 181 ± 125 minutes per day; P = .005). The time until a low blood glucose was detected by POC measurement was shortened by 33.2 ± 76.1 minutes (P = .03). The study demonstrated that CGM is able to not only reduce duration of hypoglycemia measured by CGM in interstitial fluid, but also reduce the proportion of low POC blood glucose measurements. In addition, hypoglycemia can be detected earlier.

Evaluation of the performance of a novel system for continuous glucose monitoring

BACKGROUND

The performance of a continuous glucose monitoring (CGM) system in the early stage of development was assessed in an inpatient setting that simulates daily life conditions of people with diabetes. Performance was evaluated at low glycemic, euglycemic, and high glycemic ranges as well as during phases with rapid glucose excursions.

METHODS

Each of the 30 participants with type 1 diabetes (15 female, age 47 ± 12 years, hemoglobin A1c 7.7% ± 1.3%) wore two sensors of the prototype system in parallel for 7 days. Capillary blood samples were measured at least 16 times per day (at least 15 times per daytime and at least once per night). On two subsequent study days, glucose excursions were induced. For performance evaluation, the mean absolute relative difference (MARD) between CGM readings and paired capillary blood glucose readings and precision absolute relative difference (PARD), i.e., differences between paired CGM readings were calculated.

RESULTS

Overall aggregated MARD was 9.2% and overall aggregated PARD was 7.5%. During induced glucose excursions, MARD was 10.9% and PARD was 7.8%. Lowest MARD (8.5%) and lowest PARD (6.4%) were observed in the high glycemic range (euglycemic range, MARD 9.1% and PARD 7.4%; low glycemic range, MARD 12.3% and PARD 12.4%).

CONCLUSIONS

The performance of this prototype CGM system was, particularly in the hypoglycemic range and during phases with rapid glucose fluctuations, better than performance data reported for other commercially available systems. In addition, performance of this prototype sensor was noticeably constant over the whole study period. This prototype system is not yet approved, and performance of this CGM system needs to be further assessed in clinical studies.

Performance evaluation of three continuous glucose monitoring systems: comparison of six sensors per subject in parallel

BACKGROUND

This study is aimed at comparing the performance of three continuous glucose monitoring (CGM) systems following the Clinical and Laboratory Standards Institute's POCT05-A guideline, which provides recommendations for performance evaluation of CGM systems.

METHODS

A total of 12 subjects with type 1 diabetes were enrolled in this study. Each subject wore six CGM systems in parallel, two sensors of each CGM system [FreeStyle Navigator™ (Navigator), MiniMed Guardian® REAL-Time with Enlite sensor (Guardian), DexCom™ Seven® Plus 3rd generation (Seven Plus)]. Each sensor was used for the lifetime specified by the manufacturer. To follow POCT05-A recommendations, glucose excursions were induced on two separate occasions, and venous and capillary blood glucose (BG) concentrations were obtained every 15 min for five consecutive hours. Capillary BG concentrations were measured at least once per hour during the day and once at night. Parameters investigated were CGM-to-BG differences [mean absolute relative difference (MARD)] and sensor-to-sensor differences [precision absolute relative difference (PARD)].

RESULTS

Compared with capillary BG reference readings, the Navigator showed the lowest MARD, with 12.1% overall and 24.6% in the hypoglycemic range; for the Guardian and the Seven Plus, MARD was 16.2%/34.9% and 16.3%/32.7%, respectively. PARD also was lowest for the Navigator (9.6%/9.8%), followed by the Seven Plus (16.7%/25.5%) and the Guardian (18.1%/20.2%). During induced glucose excursions, MARD between CGM and BG was, again, lowest for the Navigator (14.3%), followed by the Seven Plus (15.8%) and the Guardian (19.2%).

CONCLUSIONS

In this study, two sensors of each of the three CGM systems were compared in a setting following POCT05-A recommendations. The Navigator CGM system achieved more accurate results than the Guardian or the Seven Plus with respect to MARD and PARD. Performance in the hypoglycemic range was markedly worse for all CGM systems when compared with BG results.