Dynamic cell culture on calcium phosphate microcarriers for bone tissue engineering applications

Feasibility and barriers to rapid establishment of patient-derived primary osteosarcoma cell lines in clinical management

Osteosarcoma is a highly aggressive primary bone tumor that has seen little improvement in survival rates in the past three decades. Preclinical studies are conducted on a small pool of commercial cell lines which may not fully reflect the genetic heterogeneity of this complex cancer, potentially hindering translatability of in vitro results. Developing a single-site laboratory protocol to rapidly establish patient-derived primary cancer cell lines (PCCL) within a clinically actionable time frame of a few weeks will have significant scientific and clinical ramifications. These PCCL can widen the pool of available cell lines for study while patient-specific data could derive therapeutic correlation. This endeavor is exceedingly challenging considering the proposed time constraints. By proposing key definitions and a clear theoretical framework, this evaluation of osteosarcoma cell line establishment methodology over the past three decades assesses feasibility by identifying barriers and suggesting solutions, thereby facilitating systematic experimentation and optimization.

Osteogenic Effect of Fisetin Doping in Bioactive Glass/Poly(caprolactone) Hybrid Scaffolds

Treating large bone defects or fragile patients may require enhancing the bone regeneration rate to overcome a weak contribution from the body. This work investigates the osteogenic potential of nutrient fisetin, a flavonoid found in fruits and vegetables, as a doping agent inside the structure of a SiO₂-CaO bioactive glass-poly(caprolactone) (BG-PCL) hybrid scaffold. Embedded in the full mass of the BG-PCL hybrid during one-pot synthesis, we demonstrate fisetin to be delivered sustainably; the release follows a first-order kinetics with active fisetin concentration being delivered for more than 1 month (36 days). The biological effect of BG-PCL-fisetin-doped scaffolds (BG-PCL-Fis) has been highlighted by in vitro and in vivo studies. A positive impact is demonstrated on the adhesion and the differentiation of rat primary osteoblasts, without an adverse cytotoxic effect. Implantation in critical-size mouse calvaria defects shows bone remodeling characteristics and remarkable enhancement of bone regeneration for fisetin-doped scaffolds, with the regenerated bone volume being twofold that of nondoped scaffolds and fourfold that of a commercial trabecular bovine bone substitute. Such highly bioactive materials could stand as competitive alternative strategies involving biomaterials loaded with growth factors, the use of the latter being the subject of growing concerns.

Physical and natural cross-linking approaches on 3D gelatin microspheres for cartilage regeneration

The use of gelatin microspheres (GM) as a cell carrier has been extensively researched. One of its limitation is that it dissolves rapidly in aqueous settings, precluding its use for long-term cell propagation. This circumstance necessitates the use of cross-linking agents to circumvent the constraint. Thus, the current study examines two different methods of cross-linking and their effect on the microsphere's '"physicochemical and cartilage tissue regeneration capacity. Crosslinking was accomplished by physical [Dehydrothermal (DHT)] and natural (Genipin) cross-linking of the 3D gelatin microspheres (GM). We begin by comparing the microstructures of the scaffolds and their long-term resistance to degradation under physiological conditions (in isotonic solution, at 37 °C, pH = 7.4). Infrared spectroscopy indicated that the gelatin structure was preserved after the cross-linking treatments. The cross-linked GM" 'demonstrated good cell adhesion, viability, proliferation, and widespread 3D scaffold colonization when seeded with human bone marrow mesenchymal stem cells (BMSCs). Additionally, the cross-linked microspheres enhanced chondrogenesis, as demonstrated by the data. It was discovered that cross-linked GM increased the expression of cartilage-related genes and the biosynthesis of a glycosaminoglycan-positive matrix as compared to non-crosslinked GM. In comparison, DHT-crosslinked results were significantly enhanced. To summarize, DHT treatment was found to be a superior approach for cross-linking the GM in order to promote better cartilage tissue regeneration.

Fabrication and characterization of osteogenic function of progenitor cell-laden gelatin microcarriers

Biomaterial-based bone regeneration strategies often include a cellular component to accelerate healing. Modular approaches have the potential for minimally-invasive delivery and the ability to conformally fill complex defects. In this study, spherical gelatin microparticles were fabricated via water-in-oil emulsification and were subsequently crosslinked with genipin. Microparticle diameter depended on impeller geometry, and increased stirring rates consistently produced smaller particles with narrower size distributions. Increasing the concentration of gelatin resulted in larger particles with a broader size distribution. Viscoelastic characterization showed that increased gelatin concentration produced stiffer matrices, though the mechanical properties at lower gelatin concentration were more stable across strain rate. Microparticles of 6.0% wt/vol gelatin were then applied as microcarriers for packed-bed culture of human mesenchymal stromal cells (MSC) at seeding densities of 5.0 × 10³ , 2.5 × 10⁴ , or 5.0 × 10⁴ cells/cm² of surface area, in either control or osteogenic medium. Cell viability was uniformly high (>90%) across seeding densities over 22 days in culture. MSC number stayed approximately constant in the 5.0 × 10³ and 2.5 × 10⁴  cells/cm² samples, while it dropped over time at 5.0 × 10⁴ cells/cm² . Alkaline phosphatase activity was significantly upregulated in osteogenic conditions relative to controls at day 15, and absolute calcium deposition was strongly induced by days 15 and 22. However, calcium deposition per cell was highest in the lowest cell density, suggesting an inhibitory effect of high cell numbers. These results show that genipin-crosslinked gelatin microcarriers can be reproducibly fabricated and used as microcarriers for progenitor cells, which may have utility in treating large and complex bone defects.

Characterisation of osteogenic and vascular responses of hMSCs to Ti-Co doped phosphate glass microspheres using a microfluidic perfusion platform

Using microspherical scaffolds as building blocks to repair bone defects of specific size and shape has been proposed as a tissue engineering strategy. Here, phosphate glass (PG) microcarriers doped with 5 mol % TiO₂ and either 0 mol % CoO (CoO 0%) or 2 mol % CoO (CoO 2%) were investigated for their ability to support osteogenic and vascular responses of human mesenchymal stem cells (hMSCs). Together with standard culture techniques, cell-material interactions were studied using a novel perfusion microfluidic bioreactor that enabled cell culture on microspheres, along with automated processing and screening of culture variables. While titanium doping was found to support hMSCs expansion and differentiation, as well as endothelial cell-derived vessel formation, additional doping with cobalt did not improve the functionality of the microspheres. Furthermore, the microfluidic bioreactor enabled screening of culture parameters for cell culture on microspheres that could be potentially translated to a scaled-up system for tissue-engineered bone manufacturing.

Silk-based microcarriers: current developments and future perspectives

Cell-seeded microcarriers (MCs) are currently one of the most promising topics in biotechnology. These systems are supportive structures for cell growth and expansion that allow efficient nutrient and gas transfer between the media and the attached cells. Silk proteins have been increasingly used for this purpose in the past few years due to their biocompatibility, biodegradability and non-toxicity. To date, several silk fibroin spherical MCs in combination with alginate, gelatin and calcium phosphates have been reported with very interesting outcomes. In addition, other silk-based three-dimensional structures such as microparticles with chitosan and collagen, as well as organoids, have been increasingly studied. In this study, the physicochemical and biological properties of these biomaterials, as well as the recent methodologies for their processing and for cell culture, are discussed. The potential biomedical applications are also addressed. In addition, an analysis of the future perspectives is presented, where the potential of innovative silk-based MCs processing technologies is highlighted.

Combined Delivery of Two Different Bioactive Factors Incorporated in Hydroxyapatite Microcarrier for Bone Regeneration

BACKGROUND

The delivery of growth factors using a carrier system presents a promising and innovative tool in tissue engineering and dentistry today. Two of the foremost bioactive factors, bone morphogenetic protein-2 and vascular endothelial growth factor (VEGF), are widely applied using a ceramic scaffold. The aim of this study was to determine the use of hydroxyapatite microcarrier (MC) for dual delivery of osteogenic and angiogenic factors to accelerate hard tissue regeneration during the regenerative process.

METHODS

Two MCs of different sizes were fabricated by emulsification of gelatin and alpha-tricalcium phosphate (α-TCP). The experimental group was divided based on the combination of MC size and growth factors. For investigating the in vitro properties, rat mesenchymal stem cells (rMSCs) were harvested from bone marrow of the femur and tibia. For in vivo experiments, MC with/without growth factors was applied into the standardized, 5-mm diameter defects, which were made bilaterally on the parietal bone of the rat. The animals were allowed to heal for 8 weeks, and samples were harvested and analyzed by micro-computed tomography and histology.

RESULTS

Improved proliferation of rat mesenchymal stem cells was observed with VEGF loaded MC. For osteogenic differentiation, dual growth factors delivered by MC showed higher osteogenic gene expression, alkaline phosphatse production and calcium deposition. The in vivo results revealed statistically significant increase in new bone formation when dual growth factors were delivered by MC. Dual growth factors administered on a calcium phosphate matrix showed significantly enhanced osteogenic potential.

CONCLUSION

We propose this system has potential clinical utility in providing solutions for craniofacial bone defects, with the added benefit of early availability.

Modular microcarrier technologies for cell-based bone regeneration

A variety of materials-based approaches to accelerate the regeneration of damaged bone have been developed to meet the important clinical need for improved bone fillers. This comprehensive review covers the materials and technologies used in modular microcarrier-based methods for delivery of progenitor cells in orthopaedic repair applications. It provides an overview of the field and the rationale for using microcarriers combined with osteoprogenitor cells for bone regeneration in particular. The general concepts and methods used in microcarrier-based cell culture and delivery are described, and methods for fabricating and characterizing microcarriers designed for specific indications are presented. A comprehensive review of the current literature on the use of microcarriers in bone regeneration is provided, with emphasis on key developments in the field and their impact. The studies reviewed are organized according to the broad classes of materials that are used for fabricating microcarriers, including polysaccharides, proteins and peptides, ceramics, and synthetic polymers. In addition, composite microcarriers that incorporate multiple material types or that are mineralized biomimetically are included. In each case, the fabrication, processing, characterization, and resulting function of the microcarriers is described, with an emphasis on their ability to support osteogenic differentiation of progenitor cells in vitro, and their effectiveness in healing bone defects in vivo. In addition, a summary of the current state of the field is provided, as are future perspectives on how microcarrier technologies may be enhanced to create improved cell-based therapies for bone regeneration.

3D Culture of MSCs on a Gelatin Microsphere in a Dynamic Culture System Enhances Chondrogenesis

Recent advancement in cartilage tissue engineering has explored the potential of 3D culture to mimic the in vivo environment of human cartilaginous tissue. Three-dimensional culture using microspheres was described to play a role in driving the differentiation of mesenchymal stem cells to chondrocyte lineage. However, factors such as mechanical agitation on cell chondrogenesis during culture on the microspheres has yet to be elucidated. In this study, we compared the 2D and 3D culture of bone-marrow-derived mesenchymal stem cells (BMSCs) on gelatin microspheres (GMs) in terms of MSC stemness properties, immune-phenotype, multilineage differentiation properties, and proliferation rate. Then, to study the effect of mechanical agitation on chondrogenic differentiation in 3D culture, we cultured BMSCs on GM (BMSCs-GM) in either static or dynamic bioreactor system with two different mediums, i.e., F12: DMEM (1:1) + 10% FBS (FD) and chondrogenic induction medium (CIM). Our results show that BMSCs attached to the GM surface and remained viable in 3D culture. BMSCs-GM proliferated faster and displayed higher stemness properties than BMSCs on a tissue culture plate (BMSCs-TCP). GMs also enhanced the efficiency of in-vitro chondrogenesis of BMSCs, especially in a dynamic culture with higher cell proliferation, RNA expression, and protein expression compared to that in a static culture. To conclude, our results indicate that the 3D culture of BMSCs on gelatin microsphere was superior to 2D culture on a standard tissue culture plate. Furthermore, culturing BMSCs on GM in dynamic culture conditions enhanced their chondrogenic differentiation.

Mussel inspired ZIF8 microcarriers: a new approach for large-scale production of stem cells

Metal–organic frameworks (MOFs) have high porosity, large surface area, and tunable functionality and have been widely used for drug loading. The aim of this study was to exploit unique features of zeolitic imidazolate framework-8 (ZIF8) to develop an innovative composite microcarrier (MC) for human mesenchymal stem cells (hMSCs) adhesion and proliferation. ZIF8 MCs were prepared by immobilization of polydopamine/polyethyleneimine (PDA/PEI) and ZIF8 on the surface of polystyrene beads. The chemical properties of MCs such as coating stability and homogeneity were characterized by different techniques such as ATR-FTIR, XRD, EDX, SEM, and contact angle. The prepared MCs were tested using human adipose-derived mesenchymal stem cells (hADSCs) in both static and dynamic conditions, and results were compared to a commercially available MC (Star-Plus), polydopamine coated MCs and amine-functionalized MCs as a control. Results show that PDA/PEI/ZIF8 coated MCs (in short: ZIF8 MCs) provides an excellent biocompatible environment for hADSCs adhesion and growth. In conclusion, ZIF8 MCs represent suitable and low-cost support for hADSCs culture and expansion, which can maximize cell yield and viability while preserving hADSCs multipotency. The present findings have revealed this strategy has the potential for chemical and topographical modification of MCs in tissue engineering applications.

Mussel inspired ZIF8 microcarriers with high surface area, biocompatibility, and nanoscale surface roughness are applied to enhance mesenchymal stem cell attachment and proliferation in 3D cell culture.

Bioactive poly(ε-caprolactone) microspheres with tunable open pores as microcarriers for tissue regeneration

Microparticles with porous structure can be applied as microcarriers for both cell culture and tissue regeneration. While well-controlled pore structure represents a critical challenge to be achieved. In the present study, in order to develop microcarriers for cell culture, a series of poly(ε-caprolactone) microspheres were fabricated with varied macroporous structures. Poly(ε-caprolactone) microspheres were prepared via the integration of the emulsion/solvent evaporation and particle leaching mechanisms. Particularly, by adjusting poly(ε-caprolactone) concentration and the ratio between the porogen paraffin and poly(ε-caprolactone), the microspheres with the pore size of 25.6-84.0 μm and the porosity of 57.4-75.5% were obtained. Further, the microspheres were subjected to alkaline hydrolysis, followed by surface coating with hydroxyapatite. These porous poly(ε-caprolactone) microspheres with surface modification well supported the adhesion and growth of human fibroblasts. Together, bioactive poly(ε-caprolactone) microspheres with controlled pore structure are potential to be applied in cell culture and tissue regeneration.

Silk/Fibroin Microcarriers for Mesenchymal Stem Cell Delivery: Optimization of Cell Seeding by the Design of Experiment

In this methodological paper, lyophilized fibroin-coated alginate microcarriers (LFAMs) proposed as mesenchymal stem cells (MSCs) delivery systems and optimal MSCs seeding conditions for cell adhesion rate and cell arrangement, was defined by a Design of Experiment (DoE) approach. Cells were co-incubated with microcarriers in a bioreactor for different time intervals and conditions: variable stirring speed, dynamic culture intermittent or continuous, and different volumes of cells-LFAMs loaded in the bioreactor. Intermittent dynamic culture resulted as the most determinant parameter; the volume of LFAMs/cells suspension and the speed used for the dynamic culture contributed as well, whereas time was a less influencing parameter. The optimized seeding conditions were: 98 min of incubation time, 12.3 RPM of speed, and 401.5 µL volume of cells-LFAMs suspension cultured with the intermittent dynamic condition. This DoE predicted protocol was then validated on both human Adipose-derived Stem Cells (hASCs) and human Bone Marrow Stem Cells (hBMSCs), revealing a good cell adhesion rate on the surface of the carriers. In conclusion, microcarriers can be used as cell delivery systems at the target site (by injection or arthroscopic technique), to maintain MSCs and their activity at the injured site for regenerative medicine.

Design and Biophysical Characterization of Poly (l-Lactic) Acid Microcarriers with and without Modification of Chitosan and Nanohydroxyapatite

Nowadays, microcarriers are widely utilized in drug delivery, defect filling, and cell culture. Also, many researchers focus on the combination of synthetic and natural polymers and bioactive ceramics to prepare composite biomaterials for tissue engineering and regeneration. In this study, three kinds of microcarriers were prepared based on physical doping and surface modification, named Poly (l-lactic) acid (PLLA), PLLA/nanohydroxyapatite (PLLA/nHA), and PLLA/nHA/Chitosan (PLLA/nHA/Ch). The physicochemical properties of the microcarriers and their functional performances in MC3T3-E1 cell culture were compared. Statistical results showed that the average diameter of PLLA microcarriers was 291.9 ± 30.7 μm, and that of PLLA/nHA and PLLA/nHA/Ch microcarriers decreased to 275.7 ± 30.6 μm and 269.4 ± 26.3 μm, respectively. The surface roughness and protein adsorption of microcarriers were enhanced with the doping of nHA and coating of chitosan. The cell-carrier cultivation stated that the PLLA/nHA microcarriers had the greatest proliferation-promoting effect, while the PLLA/nHA/Ch microcarriers performed the strongest attachment with MC3T3-E1 cells. Besides, the cells on the PLLA/nHA/Ch microcarriers exhibited optimal osteogenic expression. Generally, chitosan was found to improve microcarriers with superior characteristics in cell adhesion and differentiation, and nanohydroxyapatite was beneficial for microcarriers regarding sphericity and cell proliferation. Overall, the modified microcarriers may be considered as a promising tool for bone tissue engineering.

Towards modular bone tissue engineering using Ti–Co-doped phosphate glass microspheres: cytocompatibility and dynamic culture studies

The production of large quantities of functional vascularized bone tissue ex vivo still represent an unmet clinical challenge. Microcarriers offer a potential solution to scalable manufacture of bone tissue due to their high surface area-to-volume ratio and the capacity to be assembled using a modular approach. Microcarriers made of phosphate bioactive glass doped with titanium dioxide have been previously shown to enhance proliferation of osteoblast progenitors and maturation towards functional osteoblasts. Furthemore, doping with cobalt appears to mimic hypoxic conditions that have a key role in promoting angiogenesis. This characteristic could be exploited to meet the clinical requirement of producing vascularized units of bone tissue. In the current study, the human osteosarcoma cell line MG-63 was cultured on phosphate glass microspheres doped with 5% mol titanium dioxide and different concentrations of cobalt oxide (0%, 2% and 5% mol), under static and dynamic conditions (150 and 300 rpm on an orbital shaker). Cell proliferation and the formation of aggregates of cells and microspheres were observed over a period of two weeks in all glass compositions, thus confirming the biocompatibility of the substrate and the suitability of this system for the formation of compact micro-units of tissue. At the concentrations tested, cobalt was not found to be cytotoxic and did not alter cell metabolism. On the other hand, the dynamic environment played a key role, with moderate agitation having a positive effect on cell proliferation while higher agitation resulting in impaired cell growth. Finally, in static culture assays, the capacity of cobalt doping to induce vascular endothelial growth factor (VEGF) upregulation by osteoblastic cells was observed, but was not found to increase linearly with cobalt oxide content. In conclusion, Ti–Co phosphate glasses were found to support osteoblastic cell growth and aggregate formation that is a necessary precursor to tissue formation and the upregaulation of VEGF production can potentially support vascularization.

Development and fabrication of a two-layer tissue engineered osteochondral composite using hybrid hydrogel-cancellous bone scaffolds in a spinner flask

Biological treatment using engineered osteochondral composites has received growing attention for the repair of cartilage defects. Osteochondral composites combined with a dynamic culture provide great potential for improving the quality of constructs and cartilage regeneration as dynamic conditions mimic the in vivo condition where cells were constantly subjected to mechanical and chemical stimulation. In the present study, biophasic composites were produced in vitro consisting of cell-hydrogel (CH) and cell-cancellous bone (CB) constructs, followed by culturing in a dynamic system in a spinner flask. The aim of this study was to investigate cell behaviors (i.e. cell growth, differentiation, distribution and matrix deposition) cultured in different constructs under static and dynamic circumstances. As a result, we found that mechanical stimulation promoted osteogenic and chondrogenic differentiation of cells as indicated by the increased expression of ALP and glycosaminoglycan (GAG) in either bone or cartilage substitute materials. Dynamic culture yielded a preferable extracellular matrix production, particularly in hydrogel scaffolds. In addition, the enhanced mass transfer contributed to the interface formation, cells infiltration and distribution in the osteochondral composites. This study demonstrates that osteochondral composites incorporated with a dynamic culture improved the performance of the constructs, providing the basis for a promising tool and a better strategy for the rapid fabrication of osteochondral substitutes and regeneration of injured cartilage.

Osteopromoting Reservoir of Stem Cells: Bioactive Mesoporous Nanocarrier/Collagen Gel through Slow-Releasing FGF18 and the Activated BMP Signaling

Providing an osteogenic stimulatory environment is a key strategy to construct stem cell-based bone-equivalent tissues. Here we design a stem cell delivering gel matrix made of collagen (Col) with bioactive glass nanocarriers (BGn) that incorporate osteogenic signaling molecule, fibroblast growth factor 18 (FGF18), a reservoir considered to cultivate and promote osteogenesis of mesenchymal stem cells (MSCs). The presence of BGn in the gel was shown to enhance the osteogenic differentiation of MSCs, possibly due to the therapeutic role of ions released. The mesoporous nature of BGn was effective in loading FGF18 at large quantity, and the FGF18 release from the BGn-Col gel matrix was highly sustainable with almost a zero-order kinetics, over 4 weeks as confirmed by the green fluorescence protein signal change. The released FGF18 was effective in accelerating osteogenesis (alkaline phosphatase activity and bone related gene expressions) and bone matrix formation (osteopontin, bone sialoprotein, and osteocalcin production) of MSCs. This was attributed to the bone morphogenetic protein (BMP) signaling pathway, where the FGF18 release stimulated the endogenous secretion of BMP2 and the downstream signal Smad1/5/8. Taken together, the FGF18-BGn/Col gel is considered an excellent osteopromoting depot to support and signal MSCs for bone tissue engineering.

Novel therapeutic core-shell hydrogel scaffolds with sequential delivery of cobalt and bone morphogenetic protein-2 for synergistic bone regeneration

Enabling early angiogenesis is a crucial issue in the success of bone tissue engineering. Designing scaffolds with therapeutic potential to stimulate angiogenesis as well as osteogenesis is thus considered a promising strategy. Here, we propose a novel scaffold designed to deliver angiogenic and osteogenic factors in a sequential manner to synergize the bone regeneration event. Hydrogel fibrous scaffolds comprised of a collagen-based core and an alginate-based shell were constructed. Bone morphogenetic protein 2 (BMP2) was loaded in the core, while the shell incorporated Co ions, enabled by the alginate crosslinking in CoCl2/CaCl2 solution. The incorporation of Co ions was tunable by altering the concentration of Co ions in the crosslinking solution. The incorporated Co ions, that are known to play a role in angiogenesis, were released rapidly within a week, while the BMP2, acting as an osteogenic factor, was released in a highly sustainable manner over several weeks to months. The release of Co ions significantly up-regulated the in vitro angiogenic properties of cells, including the expression of angiogenic genes (CD31, VEGF, and HIF-1α), secretion of VEGF, and the formation of tubule-like networks. However, BMP2 did not activate the angiogenic processes. Osteogenesis was also significantly enhanced by the release of Co ions as well as BMP2, characterized by higher expression of osteogenic genes (OPN, ALP, BSP, and OCN), and OCN protein secretion. An in vivo study on the designed scaffolds implanted in rat calvarium defect demonstrated significantly enhanced bone formation, evidenced by new bone volume and bone density, due to the release of BMP2 and Co ions. This is the first study using Co ions as an angiogenic element together with the osteogenic factor BMP2 within scaffolds, and the results demonstrated the possible synergistic role of Co ions with BMP2 in the bone regeneration process, suggesting a novel potential therapeutic scaffold system.

STATEMENT OF SIGNIFICANCE

This is the first report that utilizes Co ion as a pro-angiogenic factor in concert with osteogenic factor BMP-2 in the fine-tuned core-shell hydrogel fiber scaffolds, and ultimately achieves osteo/angiogenesis of MSCs and bone regeneration through the sequential delivery of both biofactors. This novel approach facilitates a new class of therapeutic scaffolds, aiming at successful bone regeneration with the help of angiogenesis.

Nanotopological-tailored calcium phosphate cements for the odontogenic stimulation of human dental pulp stem cells through integrin signaling

Nanotopological-tailored calcium phosphate cements stimulate odontogenesis of human dental pulp cells through integrin-mediated signaling pathways.