Application of Chemically Exfoliated Boron Nitride Nanosheets Doped with Co to Remove Organic Pollutants Rapidly from Textile Water

Carbon sphere doped CdS quantum dots served as a dye degrader and their bactericidal behavior analysed with in silico molecular docking analysis

We have employed a co-precipitation method to synthesize different concentrations of carbon spheres (CSs) doped with cadmium sulfide (CdS) quantum dots (QDs) for catalytic reduction and antibacterial applications. Various morphological and structural characterization techniques were used to comprehensively analyze the CS effect on CdS QDs. The catalytic reduction efficiency of CS-doped CdS QDs was evaluated using rhodamine B dye. The antibacterial efficacy was also assessed against the pathogenic microorganism Escherichia coli (E. coli), and substantial destruction in the inhibitory zone was measured. Finally, the synthesized CS-doped CdS QDs demonstrated favorable results for catalytic reduction and antibacterial applications. Computational studies verified the suppressive impact of these formed QDs on DNA gyrase and β-lactamase of E. coli.

Multiple phases of yttrium-doped molybdenum trioxide nanorods as efficient dye degrader and bactericidal agents with molecular docking analysis

Contaminants removal is usually becoming an exciting subject of research from water considering their environmental and ecological effects. This work provides pathways to remove organic pollutants from water via nanomaterials and is used as an antibiotic against bacteria like Escherichia coli (E. coli). In this study, molybdenum trioxide (MoO3) and yttrium (Y) doped (2 and 4%) MoO3 nanorods were synthesized by co-precipitation method. Advanced characterization techniques have been introduced to study textural structures, morphological developments, and optical characteristics of produced products. X-ray diffraction studied multiple crystalline structures of prepared samples as hexagonal, orthorhombic, and monoclinic of pure MoO3 with decrease in crystallinity and crystallite size upon Y doping. UV-visible spectroscopy unveiled a redshift (bathochromic effect) in absorption pattern attributed to band gap energy (Eg) decreases. Photoluminescence spectra examined the recombination rate of electrons (e-) and holes (h+) as charge carriers. A sufficient catalytic activity (CA) was observed against methylene blue (MB) dye in an acidic medium (99.74%) and efficient bactericidal action was studied against (E. coli) with zone of inhibition (5.20 mm) for 4% Y-doped MoO3. In addition, in silico docking demonstrated potential inhibitory effect of produced nanomaterials on FabH and FabI enzymes of fatty acid biosynthesis.

Chitosan grafted polyacrylic acid doped MnO2 nanocomposite an efficient dye degrader and antimicrobial agent

Manganese dioxide (MnO2) nanorods and (3, 6, and 9 mL) chitosan grafted polyacrylic acid (CS-g-PAA) doped MnO2 were prepared hydrothermally. The study objective is to decrease the recombination rate of MnO2 upon doping to enhance the dye degradation efficiency and antimicrobial activity. The doping-dependent properties of CS-g-PAA on phase identification, functional groups, optical characteristics, elemental compositions, and morphological analyses of MnO2 nanorods were conducted using systematic characterization techniques. XRD pattern shows that MnO2 has a tetragonal structure, with increased crystallite size (15.87 to 29.36 nm) upon doping. The TEM analysis showed that MnO2 has nanorods and that CS-g-PAA doped MnO2 displayed nanoflakes-like structures. The decrease in electron-hole pair recombination rate on doping was verified by PL spectroscopy, demonstrating the enhanced catalytic activity. Moreover, adding grafted binary polymers to MnO2 inhibits bacterial cell growth by binding with the negatively charged cell wall and preventing biofilm formation. The 9 mL doped sample displayed a maximum degradation (99.27 %) in a neutral medium and 85.84 % antimicrobial efficiency against E. coli. The enoyl-acyl carrier protein reductase (FabIE. coli) and DNA gyrase(E. coli) were inhibited by these CS-g-PAA doped MnO2 nanostructures (NSs), as shown by in silico molecular docking studies.

Enhancement of Isotropic Heat Dissipation of Polymer Composites by Using Ternary Filler Systems Consisting of Boron Nitride Nanotubes, h-BN, and Al2O3

In this research article, a poly(dimethylsiloxane) (PDMS)-based composite was postulated adapting an interactive ternary filler system consisting of Al₂O₃, hexagonal boron nitride (h-BN), and boron nitride nanotubes (BNNT) to construct a continuous three-dimensional (3D) structure for thermal attenuation. Al₂O₃ was imposed as a main filler, while h-BN and BNNT were assimilated to form interconnected heat conduction pathways for effective thermal dissipation. The structured framework articulates a profound improvement in isotropic thermal conductivity considering both axial and radial heat dissipation. The presence of h-BN entails uniform heat distribution in a planar mode, eliminating the occurrence of hotspots, while BNNT constructed a connecting phonon pathway in various directions, which insinuates effective overall thermal transport. The generated ternary filler composites attained an isotropic ratio of 1.35 and a thermal conductivity of 7.50 W/mK, which is a 36-fold (∼3650%) increase compared to neat PDMS resin and almost 3-fold (∼297%) that of the Al₂O₃ unary filler composite and ∼53% that of its binary counterpart, partaking interfacial thermal gaps of ∼36.15 and ∼62.24% on practical heating performance relative to its counterparts. Moreover, the incorporation of BNNT on a traditional spherical and planar filler offers an advantage not only in thermal conductivity but also in thermal and structural stability. Improvement in thermal stability is stipulated due to a melting point (T_m) shift of ∼11 °C upon the assimilation of BNNT. Mechanical permeance reinforcement was also observed with the presence of BNNT, showcasing a 31.5% increase in tensile strength and a 53% increase in Young's modulus relative to the singular filler composite. This exploration administers a new insight into heat dissipation phenomena in polymeric composites and proposes a simple approach to their design and assembly.

Molybdenum-doped iron oxide nanostructures synthesized via a chemical co-precipitation route for efficient dye degradation and antimicrobial performance: in silico molecular docking studies

In this research, various concentrations of molybdenum (2, 4 and 6 wt%) doped Fe₃O₄ nanostructures (Mo-Fe₃O₄ NSs) were prepared via a co-precipitation technique. Various techniques were then used to investigate the optical, morphological and structural properties of the NSs in the presence of the dopant materials. X-ray diffraction (XRD) was used to investigate the crystalline nature of the prepared NSs and confirm the orthorhombic and tetragonal structure of Fe₃O₄, with a decrease in crystallinity and crystallite sizes of 36.11, 38.45, 25.74 and 24.38 nm with increasing concentration of Mo (2, 4 and 6%). Fourier-transform infrared (FTIR) spectroscopy analysis was carried out to examine the functional groups in the NSs. Structure, surface morphology and topography were examined via field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM), which confirmed the fabrication of nanoparticles and nanorods and a floccule-like morphology with a higher doping concentration and the interlayer d-spacing was calculated using high-resolution (HR)TEM, the results of which were a good match to the XRD data. The presence of Mo, Fe and O in a lattice of Mo (2, 4 and 6%) doped Fe₃O₄ was confirmed by energy dispersive X-ray spectroscopy (EDS) analysis. The energy band gap (E _g) was measured via the optical analysis of pure and doped samples, showing a decrease from 2.76 to 2.64 eV. The photoluminescence (PL) spectra exhibit a higher charge combination rate of electron-hole pairs with a higher concentration of doping. The NSs exhibited excellent catalytic activity (CA) in degrading methylene blue (MB) dye in a basic medium by around 86.25%. Additionally, the antimicrobial activity was tested against Escherichia coli (E. coli) bacteria. Pairs of electrons and holes are the fundamental basis for generating reactive oxygen species that kill bacteria. The significant inhibition zones were calculated against E. coli bacteria at around 3.45 mm compared to ciprofloxacin. In silico docking investigations of the Mo-Fe₃O₄ NSs for dihydropteroate synthase (DHPS, binding score: 6.16 kcal mol^-1), dihydrofolate reductase (DHFR, binding score: 6.01 kcal mol^-1), and β-ketoacyl-acyl carrier protein synthase III (FabH, binding score: 5.75 kcal mol^-1) of E. coli show the suppression of the aforementioned enzymes as a potential mechanism besides their microbicidal assay.

Metal-Organic Framework-Derived Fe-Doped Ni3Se4/NiSe2 Heterostructure-Embedded Mesoporous Tubes for Boosting Oxygen Evolution Reaction

It is crucial but challenging to promote sluggish kinetics of oxygen evolution reaction (OER) for water splitting via finely tuning the hierarchical nanoarchitecture and electronic structure of the catalyst. To address such issues, herein we present iron-doped Ni₃Se₄/NiSe₂ heterostructure-embedded metal-organic framework-derived mesoporous tubes (Ni-MOF-Fe-Se-400) realized by an interfacial engineering strategy. Due to the hierarchical nanoarchitecture of conductive two-dimensional nanosheet-constructed MOF-derived mesoporous tubes, coupled with fine tuning of the electronic structure via Fe-doping and interactions between Ni₃Se₄/NiSe₂ heterostructures, the Ni-MOF-Fe-Se-400 catalyst delivers superior OER activity: it requires only a low overpotential of 242 mV to achieve 10 mA cm^-2 (E_j=10), surpassing the benchmark RuO₂ (E_j=10 = 286 mV) and displays exceptional durability in the chronoamperometric i-t test with a small current decay (6.2%) after 72 h. Furthermore, the water splitting system comprises a Ni-MOF-Fe-Se-400 anode and a Pt/C cathode requires a low cell voltage of 1.576 V to achieve E_j=10 with an excellent Faradic efficiency (∼100%), outperforming the RuO₂-Pt/C combination. This work presents a novel interfacial engineering strategy to finely adjust the morphology and electronic structure of the non-noble metal-based OER catalyst via a facile fabrication method.

Structural, optical, magnetic, and enhanced antibacterial properties of hydrothermally synthesized Sm-incorporating α-MoO3 2D-layered nanoplates

In this study, we have synthesized pristine and [0.5,1.5, and 2.5] M% samarium (Sm)-incorporating α-MoO₃ 2D-layered nanoplates utilizing a facile hydrothermal process, and investigated the physical properties along with antibacterial effectiveness. X-ray diffraction (XRD) patterns confirmed the single-phase, stable orthorhombic polycrystalline structure of the as-prepared samples. The crystallite size, lattice strain, and dislocation density were measured using both Debye-Scherrer (D-S) and Williamson-Hall (W-H) techniques. Both pristine and Sm-incorporating α-MoO₃ samples showed two-dimensional (2D) layered nanoplate-type surface morphology, revealed by field emission scanning electron microscopy (FE-SEM) images. Energy dispersive X-ray spectroscopy (EDS) confirmed the presence of Sm contents in the α-MoO₃ matrix. After Sm incorporation in α-MoO₃, the different functional groups as well as vibrational groups were observed by Fourier-transform infrared (FTIR) spectroscopy and Raman spectroscopy analyses, respectively. The optical band gaps were measured from UV-vis diffuse reflectance spectroscopy (DRS) by employing the Kubelka-Munk formula and interestingly it is found that the bandgap energy (E _g) gradually decreased from 2.96 to 2.83 eV with the increment of Sm content. When compared to pristine α-MoO₃, the Sm-incorporating samples experienced a steady improvement in room temperature ferromagnetic (RTFM) behavior as Sm content increased, as measured by hysteresis loops. The antibacterial activities of both samples were assessed against Gram-positive: Staphylococcus aureus (S. aureus), and Gram-negative: Escherichia coli (E. coli) and Salmonella enteritidis (S. enteritidis) bacteria by the agar well diffusion method and enhanced antibacterial activity was observed as the Sm concentration increased, compared to pristine nanoplates. The obtained results suggest that the synthesized Sm-incorporating α-MoO₃ 2D-layered nanoplate could be a potential antibacterial agent.

Dual-emissive ratiometric fluorescent nanosensor based on multi-nanomaterials for Ag+ determination in lake water

In this study, a sensitive ratiometric fluorescent nanosensor was constructed using a facile one-pot method by encapsulating carbon dots (CDs) and cadmium telluride quantum dots (CdTe QDs) into the pore cavities of a metal-organic framework (ZIF-8). In this nanosensor (CD/CdTe QD@ZIF-8), the fluorescence attributed to CdTe QDs was quenched by silver ions (Ag⁺), and the fluorescence intensity of CDs did not change. The introduction of ZIF-8 into the system can not only adsorb Ag⁺ but also easily separate CDs and CdTe QDs from the matrix. The developed CD/CdTe QD@ZIF-8 composite used as a ratiometric fluorescent probe exhibited high sensitivity and selectivity towards Ag⁺. The working linear range was 0.1-20 μM with a limit of detection (LOD) of 1.49 nM. Finally, the proposed nanosensor was applied to determine Ag⁺ in lake water with satisfactory results.

Structural, morphological, and optical properties of carbon nanoparticles unsheathed from date palm fronds

Several studies have reported the synthesis of carbon nanoparticles (CNPs) by various methods. In this study, an easy one-step process to unsheathe CNPs from date palm fronds through a top-down ball milling method has been reported. The CNPs were characterized using various spectroscopic and microscopic methods to determine their structural and morphological features, optical properties, crystallinity, physicochemical properties, and particle stability. Transmission electron microscopy (TEM) revealed that the obtained CNPs' size ranged from 4 to 22 nm in a crystalline form. Scanning electron microscopy (SEM) confirmed their spherical shape, while the maximum photoluminescence (PL) intensity was recorded at 464 nm when excited at 375 nm. The unsheathed CNPs produced a good quantum yield (QY) of 3.24%. Furthermore, the CNPs exhibited high Raman ratios of I D/I G and I 2D/I G with values of 0.59 and 0.04, respectively, verifying their multilayer crystalline graphitic nature. These Raman ratios also agree with the X-ray diffractometry (XRD) results. The CNPs' sp2 and sp3 carbon bonds were confirmed by X-ray photoelectron spectroscopy (XPS), with oxygen on the surface forming carboxyl and carbonyl groups with no other observable impurities. Furthermore, the extracted CNPs showed excellent PL properties for up- and down-conversion. These properties are exemplary for low-cost biomass with potential applications in biomedicine. Therefore, the extracted CNPs reported in this study have potential applications in optical imaging.

Recent Progress in Fabrication and Application of BN Nanostructures and BN-Based Nanohybrids

Due to its unique physical, chemical, and mechanical properties, such as a low specific density, large specific surface area, excellent thermal stability, oxidation resistance, low friction, good dispersion stability, enhanced adsorbing capacity, large interlayer shear force, and wide bandgap, hexagonal boron nitride (h-BN) nanostructures are of great interest in many fields. These include, but are not limited to, (i) heterogeneous catalysts, (ii) promising nanocarriers for targeted drug delivery to tumor cells and nanoparticles containing therapeutic agents to fight bacterial and fungal infections, (iii) reinforcing phases in metal, ceramics, and polymer matrix composites, (iv) additives to liquid lubricants, (v) substrates for surface enhanced Raman spectroscopy, (vi) agents for boron neutron capture therapy, (vii) water purifiers, (viii) gas and biological sensors, and (ix) quantum dots, single photon emitters, and heterostructures for electronic, plasmonic, optical, optoelectronic, semiconductor, and magnetic devices. All of these areas are developing rapidly. Thus, the goal of this review is to analyze the critical mass of knowledge and the current state-of-the-art in the field of BN-based nanomaterial fabrication and application based on their amazing properties.

Facile Synthesis of La- and Chitosan-Doped CaO Nanoparticles and Their Evaluation for Catalytic and Antimicrobial Potential with Molecular Docking Studies

In the current study, a low-cost and straightforward coprecipitation technique was adopted to synthesize CaO and La-doped CS/CaO NPs. Different weight ratios (2 and 4) of La were doped into fixed amounts of CS and CaO. Synthesized samples exhibited outstanding catalytic performance by degrading methylene blue (MB) in a highly efficient manner. The X-ray diffraction technique detected the presence of a cubic phase of CaO and a decrease in crystallite size of the samples with the addition of La. Fourier transform infrared spectroscopy confirmed the presence of the dopant and the base material with functional groups at 712 cm^-1. A decrease in the absorption intensity of doped CaO was observed with an increasing amount of dopants La and CS accompanied by a blueshift leading to an increase in the band gap energy from 4.17 to 4.42 eV, as recorded with an ultraviolet-visible spectrophotometer. The presence of dopants (La and CS) and the evaluation of the elemental constitution of Ca and O were supported with the energy-dispersive spectroscopy technique. In an acidic medium, the catalytic activity against the MB dye was reduced (93.8%) for 4% La-doped CS/CaO. For La-doped CS/CaO, vast inhibition domains ranged within 4.15-4.70 and 5.82-8.05 mm against Escherichia coli while 4.15-5.20 and 6.65-13.10 mm against Staphylococcus aureus (S. aureus) at the least and maximum concentrations, correspondingly. In silico molecular docking studies suggested these nanocomposites of chitosan as possible inhibitors against the enoyl-acyl carrier protein reductase (FabI) from S. aureus.

Dye degradation, antibacterial activity and molecular docking analysis of cellulose/polyvinylpyrrolidone-doped cadmium sulphide quantum dots

In present study, control sized cadmium sulphide (CdS) quantum dots (QDs) and cellulose nanocrystals grafted polyvinylpyrrolidone (CNC-g-PVP) doped CdS QDs were synthesized via co-precipitation. The suggested pathway is fruitful in throwing out organic pollutants like methylene blue (MB) from industrial water and bactericidal applications. A series of characterization techniques were used to determine the structural, optical and morphological qualities of prepared samples. The X-ray diffraction (XRD) pattern verified hexagonal structure with no significant change occurring in the spectrum upon doping (2, 4, and 6 %). The UV-vis spectrophotometer describes blueshift in absorption pattern, resulting in an increase in band gap energy (E_g) upon doping. Catalytic activity (CA) against MB in basic and neutral medium demonstrated remarkable results compared with the acidic medium. Furthermore, bactericidal potential of doped sample (6 %) exhibited the significantly higher inhibition zones of 5.25 mm and 4.05 mm against Staphylococcus aureus (S. aureus) or Gram-positive (G₊ve) and Escherichia coli (E. coli) or Gram-negative (G-ve), respectively. In silico predictions for these doped QDs were performed against selected enzyme targets (i.e. DNA gyrase and FabI) to unveil the mystery governing these bactericidal activities.

Fe3O4 nanoparticles encapsulated in boron nitride support via N-doped carbon layer as a peroxymonosulfate activator for pollutant degradation: Important role of metal boosted C-N sites

Developing highly efficient and stable catalysts for peroxymonosulfate (PMS) based advanced oxidation processes (AOPs) are crucial in the field of environmental remediation. In this work, a facile encapsulated-precursor pyrolysis strategy was reported to prepare a competent PMS-activation catalyst, in which uniformly distributed Fe3O4 nanoparticles were firmly anchored on porous boron nitride (BN) nanosheets by N-doped carbon shell (NC layer). Taking advantage of strong metal-support interaction, the as-synthesized catalyst (BFA-500) could efficiently activate PMS to achieve 100% removal of 4-chlorophenol (4-CP) in 6 min, and the corresponding turnover frequency (TOF) value was 1-2 orders of magnitude higher than that of the benchmark homogeneous (Fe2+) and nanoparticle (Fe0 and Fe3O4) catalysts. Moreover, the well protected encapsulated structure of BFA-500 ensured the remarkable stability that could effectively resist the interference of complex water environment, including initial pH value, various inorganic ions and actual water, and its catalytic activity remained almost unchanged in 5 use-regeneration cycles. More importantly, the generation of O2•- and 1O2 radicals for the 4-CP removal in BFA-500/PMS system was ascribed to Fe3O4 boosted C-N sites containing pyridinic N, where electrons transferred from the embedded Fe3O4 nanoparticles to C-N sites to secure the PMS dissociation into reactive radicals. Overall, this work provided a promising way to design desired PMS-activation catalyst toward wastewater purification.

Toward efficient dye degradation and the bactericidal behavior of Mo-doped La2O3 nanostructures

In this study, different concentrations (0, 0.02, 0.04, and 0.06 wt%) of Mo doped onto La2O3 nanostructures were synthesized using a one-pot co-precipitation process. The aim was to study the ability of Mo-doped La2O3 samples to degrade toxic methylene blue dye in different pH media. The bactericidal potential of synthesized samples was also investigated. The structural properties of prepared samples were examined by XRD. The observed XRD spectrum of La2O3 showed a cubic and hexagonal structure, while no change was recorded in Mo-doped La2O3 samples. Doping with Mo improved the crystallinity of the samples. UV-Vis spectrophotometry and density functional theory calculations were used to assess the optical characteristics of Mo-La2O3. The band gap energy was reduced while the absorption spectra showed prominent peaks due to Mo doping. The HR-TEM results revealed the rod-like morphology of La2O3. The rod-like network appeared to become dense upon doping. A significant degradation of MB was confirmed with Mo; furthermore, the bactericidal activities against S. aureus and E. coli were measured as 5.05 mm and 5.45 mm inhibition zones, respectively, after doping with a high concentration (6%) of Mo.

Eco-green C, O co-doped porous BN adsorbent for aqueous solution with superior adsorption efficiency and selectivity

Toxic dyes in wastewater will become a significant hazard to human health if they are not treated effectively. Therefore, it is significant to separate and remove dyes from the aqueous solution. C and O co-doped BN (BCNO) with high adsorption capacity and outstanding cycle efficiency is a simple and efficient adsorbent for the cationic dye malachite green (MG). Glucose is characterized as an eco-friendly and cheap source of C and O. Benefited by the high specific surface area (1515.6 m²/g), the maximum adsorption capacity of MG is 1511.1 mg/g. Besides, the curves of adsorption fitting correspond to the Langmuir model and the pseudo-second-order model, respectively. Moreover, after 5 cycles, the adsorption efficiency reached 78% of the first time and the adsorption capacity remained above 780 mg/g. Furthermore, in the selectivity adsorption study, the cationic dyes (MG, neutral red (NR), methylene blue (MB)) can be removed more effectively in the binary dye system of MG-methyl orange (MO), NR-MO, MB-MO, MG-Orange II (OR), MB-OR, or NR-OR. BCNO-2 has a promising application in the removal of cationic dyes from complex dye wastewaters.

Visualization of Transition Metal Decoration on h-BN Surface

Functional h-BN (hexagonal boron nitride) has been prepared via the incorporation of transition metal (TM) impurities like nanoparticles and single atoms. Herein, scanning transmission electron microscopy (STEM) combined with density functional theory (DFT) was employed to study Ta-, Co-, Ni-, and Ir-decorated h-BN monolayers to provide an overview of their preferential site occupancies and morphological evolutions on h-BN. Ta, Ni, Ir, and Co single atoms are all positioned on the nitrogen of h-BN; however DFT predicts the occupancy site can vary with their spin state. In terms of microstructural evolution, Co, Ni, and Ir atoms form 3D nanoclusters while Ta atoms are well dispersed and thus the single Ta atom can be decorated on h-BN. This study highlights on TM/h-BN interaction dynamics and presents an avenue for designing nanostructures for electrocatalytic application.

Cellular biogenesis of metal nanoparticles by water velvet (Azolla pinnata): different fates of the uptake Fe3+ and Ni2+ to transform into nanoparticles

Plants can produce cellular metal nanoparticles (NPs) from the uptake of metal ions, but the mechanism remains unclear. This work reported the new insight into different fates of iron (Fe) and nickel (Ni) ions to transform into the metal NPs in Azolla pinnata roots. After exposing to ferric nitrate, nickel nitrate, and a combination of both for 12 h, the energy dispersive X-ray fluorescence analysis indicated the efficient uptakes of both metal ions in the roots and their transports into the shoots. Transmission electron microscope images revealed the accumulation of spherical FeNPs, but not NiNPs, near the cell wall and cell membrane, and inside vacuoles and multivesicular bodies in cortical and vascular cells at the root tips. The energy dispersive X-ray analysis suggested that the formation of metal NPs depended on the sufficient concentration of metal ions localized in the roots. FeNPs were identified to ɑ-Fe2O3 and Fe3O4 by selected area electron diffraction analysis. The formation of FeNPs might involve the increase of superoxide dismutase activity. This work is the first report about the cellular biogenesis of metal NPs in plant roots that likely depends on cellular metal content and involves the reducing activity of antioxidant enzymes.

A stable and plug-and-play aluminium/titanium dioxide/metal-organic framework/silver composite sheet for sensitive Raman detection and photocatalytic removal of 4-aminothiophenol

The sensitive detection and rapid removal of 4-aminothiophenol (4-ATP, a poisonous pesticide) demand special design to potential substrates. Herein, a metal-organic framework (ZIF-8) and Ag nanoparticles were fabricated one by one on the TiO₂ coated Al sheet, and thus the Al-TiO₂-ZIF-8-Ag sheet with sandwich structure was successfully synthesized. The cost-effective Al-TiO₂-ZIF-8-Ag sheet (3.7 wt% Ag) possessed a low detection concentration of 1 × 10^-9 M towards 4-ATP, and surface-enhanced Raman scattering (SERS) analytical enhanced factor (AEF) of the Al-TiO₂-ZIF-8-Ag was 2.6 × 10⁶, which was higher than other similar substrates. Furthermore, 4-ATP can be selectively and repeatedly detected on the Al-TiO₂-ZIF-8-Ag even through it was in real samples. It indicated that the Al-TiO₂-ZIF-8-Ag was a very active and stable SERS materials for the monitoring of 4-ATP. Importantly, the substrate exhibited faster and more efficient photocatalytic activity for 4-ATP degradation. The SERS and photocatalytic mechanisms of 4-ATP on the Al-TiO₂-ZIF-8-Ag substrate were proposed. The cost-effective Al-TiO₂-ZIF-8-Ag sheet with double function is plug-and-play, and could be used in the detection and treatment of pollutants in wastewater.

Toward the Development of Disposable Electrodes Based on Holmium Orthovanadate/f-Boron Nitride: Impacts and Electrochemical Performances of Emerging Inorganic Contaminants

Rare-earth metal orthovanadates have great technological relevance in the family of rare-earth compounds owing to their excellent physical and chemical properties. A significant number of studies have been carried out on this class of compounds to exploit their electrochemical properties in virtue of variable oxidation states. But holmium vanadate (HoV) and its morphology selective synthesis have not been considered, which can have potential applications similar to the rest of the family. In this work, we propose the synthesis of superior architectures of HoV with a functionalized boron nitride (f-BN) nanocomposite. The synergistic effect between HoV and f-BN can have a positive effect on the physical characteristics of the nanocomposite, which can be explored for its electrochemical capacity. Here, HoV incorporated with f-BN is explored for the electrochemical detection of Hg²⁺ ions, which is known for its toxicity-induced environmental health hazards. The structural and compositional revelation reveals higher conductivity and faster electron transfer in the composite, which facilitates a wide working range (0.02-53.8 and 64.73-295.4 μM), low limit of detection (5 nM), higher sensitivity (66.6 μA μM^-1 cm^-2), good selectivity over 10-fold higher concentration of other interfering compounds compared to Hg²⁺ ion concentration, and good cycles stability (30 segments) toward Hg²⁺ ion detection. This also envisages the morphology selective synthesis and utilization of other rare-earth metals, whose electrochemical capacities are unexplored.

Development of Multi-concentration Cu:Ag Bimetallic Nanoparticles as a Promising Bactericidal for Antibiotic-Resistant Bacteria as Evaluated with Molecular Docking Study

The present study is concerned with evaluating the influence of various concentrations of Ag within Cu:Ag bimetallic nanoparticles developed for use as a promising anti-bacterial agent against antibiotic-resistant bacteria. Here, Cu:Ag bimetallic nanoparticles with various concentration ratios (2.5, 5.0, 7.5, and 10 wt%) of Ag in fixed amount of Cu labeled as 1:0.025, 1:0.050, 1:0.075, and 1:0.1 were synthesized using co-precipitation method with ammonium hydroxide and deionized water as solvent, polyvinyl pyrrolidone as a capping agent, and sodium borohydride and ascorbic acid as reducing agents. These formulated products were characterized through a variety of techniques. XRD confirmed phase purity and detected the presence of distinct fcc structures belonging to Cu and Ag phases. FTIR spectroscopy confirmed the presence of vibrational modes corresponding to various functional groups and recorded characteristic peak emanating from the bimetallic. UV-visible spectroscopy revealed reduction in band gap with increasing Ag content. SEM and HR-TEM micrographs revealed spherical morphology of Ag-doped Cu bimetallic with small and large scale agglomerations. The samples exhibited varying dimensions and interlayer spacing. Bactericidal action of synthesized Cu:Ag bimetallic NPs depicted statistically significant (P < 0.05) inhibition zones recorded for various concentrations of Ag dopant against Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), and Acinetobacter baumannii (A. baumannii) ranging from (0.85-2.8 mm), (0.55-1.95 mm) and (0.65-1.85 mm), respectively. Broadly, Cu:Ag bimetallic NPs were found to be more potent against gram-positive compared with gram-negative. Molecular docking study of Ag-Cu bimetallic NPs was performed against β-lactamase which is a key enzyme of cell wall biosynthetic pathway from both S. aureus (Binding score: - 4.981 kcal/mol) and A. bauminnii (Binding score: - 4.013 kcal/mol). Similarly, binding interaction analysis against FabI belonging to fatty acid biosynthetic pathway from A. bauminnii (Binding score: - 3.385 kcal/mol) and S. aureus (Binding score: - 3.012 kcal/mol) along with FabH from E. coli (Binding score: - 4.372 kcal/mol) was undertaken. These theoretical computations indicate Cu-Ag bimetallic NPs as possible inhibitor of selected enzymes. It is suggested that exploring in vitro inhibition potential of these materials may open new avenues for antibiotic discovery.

Impact of Bi Doping into Boron Nitride Nanosheets on Electronic and Optical Properties Using Theoretical Calculations and Experiments

In the present work, boron nitride (BN) nanosheets were prepared through bulk BN liquid phase exfoliation while various wt. ratios (2.5, 5, 7.5 and 10) of bismuth (Bi) were incorporated as dopant using hydrothermal technique. Our findings exhibit that the optical investigation showed absorption spectra in near UV region. Density functional theory calculations indicate that Bi doping has led to various modifications in the electronic structures of BN nanosheet by inducing new localized gap states around the Fermi level. It was found that bandgap energy decrease with the increase of Bi dopant concentrations. Therefore, in analysis of the calculated absorption spectra, a redshift has been observed in the absorption edges, which is consistent with the experimental observation. Additionally, host and Bi-doped BN nanosheets were assessed for their catalytic and antibacterial potential. Catalytic activity of doped free and doped BN nanosheets was evaluated by assessing their performance in dye reduction/degradation process. Bactericidal activity of Bi-doped BN nanosheets resulted in enhanced efficiency measured at 0-33.8% and 43.4-60% against S. aureus and 0-38.8% and 50.5-85.8% against E. coli, respectively. Furthermore, In silico molecular docking predictions were in good agreement with in-vitro bactericidal activity. Bi-doped BN nanosheets showed good binding score against DHFR of E. coli (- 11.971 kcal/mol) and S. aureus (- 8.526 kcal/mol) while binding score for DNA gyrase from E. coli (- 6.782 kcal/mol) and S. aureus (- 7.819 kcal/mol) suggested these selected enzymes as possible target.

Photocatalytic and bactericidal properties and molecular docking analysis of TiO2 nanoparticles conjugated with Zr for environmental remediation

Despite implementing several methodologies including a combination of physical, chemical and biological techniques, aquatic and microbial pollution remains a challenge to this day. Recently, nanomaterials have attracted considerable attention due to their extraordinary prospective for utilization toward environmental remediation. Among several probable candidates, TiO2 stands out due to its potential for use in multifaceted applications. One way to improve the catalytic and antimicrobial potential of TiO2 is to dope it with certain elements. In this study, Zr-doped TiO2 was synthesized through a sol-gel chemical method using various dopant concentrations (2, 4, 6, and 8 wt%). Surface morphological, microstructural and elemental analysis was carried out using FESEM and HR-TEM along with EDS to confirm the formation of Zr-TiO2. XRD spectra showed a linear shift of the (101) anatase peak to lower diffraction angles (from 25.4° to 25.08°) with increasing Zr4+ concentration. Functional groups were examined via FTIR, an ample absorption band appearing between 400 and 700 cm-1 in the acquired spectrum was attributed to the vibration modes of the Ti-O-Ti linkage present within TiO2 nanoparticles, which denotes the formation of TiO2. Experimental results indicated that with increasing dopant concentrations, photocatalytic potential was enhanced significantly. In this respect, TiO2 doped with 8 wt% Zr (sample 0.08 : 1) exhibited outstanding performance by realizing 98% elimination of synthetic MB in 100 minutes. This is thought to be due to a decreased rate of electron-hole pair recombination that transpires upon doping. Therefore, it is proposed that Zr-doped TiO2 can be used as an effective photocatalyst material for various environmental and wastewater treatment applications. The good docking scores and binding confirmation of Zr-doped TiO2 suggested doped nanoparticles as a potential inhibitor against selected targets of both E. coli and S. aureus. Hence, enzyme inhibition studies of Zr-doped TiO2 NPs are suggested for further confirmation of these in silico predictions.

Comparative Study of Selenides and Tellurides of Transition Metals (Nb and Ta) with Respect to its Catalytic, Antimicrobial, and Molecular Docking Performance

The present research is a comparative study that reports an economical and accessible method to synthesize niobium (Nb) and Tantalum (Ta) selenides and tellurides with useful application in the removal of pollutants in textile, paper, and dyeing industries as well as in medical field. In this study, solid-state process was used to generate nanocomposites and various characterization techniques were employed to compare two groups of materials under investigation. Structure, morphology, elemental constitution, and functional groups of synthesized materials were analyzed with XRD, FESEM coupled with EDS, FTIR, and Raman spectroscopy, respectively. HR-TEM images displayed nanoscale particles with tetragonal and monoclinic crystal structures. The optical properties were evaluated in terms of cut-off wavelength and optical band gap using UV-visible spectroscopy. A comparative behavior of both groups of compounds was assessed with regards to their catalytic and microcidal properties. Extracted nanocomposites when used as catalysts, though isomorphs of each other, showed markedly different behavior in catalytic degradation of MB dye in the presence of NaBH₄ that was employed as a reducing agent. This peculiar deviation might be attributed to slight structural differences between them. Escherichia coli and Staphylococcus aureus (G -ve and + ve bacteria, respectively) were designated as model strains for in vitro antibacterial tests of both clusters by employing disk diffusion method. Superior antibacterial efficacy was observed for telluride system (significant inhibition zones of 26-35 mm) compared with selenide system (diameter of inhibition zone ranged from 0.8 mm to 1.9 mm). In addition, molecular docking study was undertaken to ascertain the binding interaction pattern between NPs and active sites in targeted cell protein. The findings were in agreement with antimicrobial test results suggesting NbTe₄ to be the best inhibitor against FabH and FabI enzymes.

Dye degradation performance, bactericidal behavior and molecular docking analysis of Cu-doped TiO2 nanoparticles

Copper-doped TiO2 was prepared with a sol-gel chemical method. Various concentrations (3, 6, and 9 wt%) of Cu dopant were employed. Several techniques were implemented to assess the structural, optical, morphological and chemical properties of the synthesized samples. Evaluation of elemental composition using SEM-EDS and XRF techniques showed the presence of dopant element in the prepared samples. XRD analysis confirmed the presence of anatase (TiO2) phase with interstitial doping. Incorporation of dopant was observed to enhance the crystallinity and increase the crystallite size of the synthesized products. SAED profiles revealed a high degree of crystallinity in the prepared specimens, which was also evident in the XRD spectra. Optical properties studied using UV-vis spectroscopy depicted a shift of the maximum absorption to the visible region (redshift) that signified a reduction in the band gap energy of Cu-doped TiO2 samples. Examination of morphological features with scanning and high-resolution transmission electron microscopes revealed the formation of spherical nanoparticles with a tendency to agglomerate with increasing dopant concentration. Molecular vibrations and the formation of Ti-O-Ti bonds were revealed through FTIR spectra. PL spectroscopy recorded the trapping efficiency and migration of charge carriers, which exhibited electron-hole recombination behavior. Doped nanostructures showed enhanced bactericidal performance and synergism against S. aureus and E. coli. In summary, Cu-doped TiO2 nanostructures were observed to impede bacteria effectively, which is deemed beneficial in overcoming ailments caused by pathogens such as microbial etiologies. Furthermore, molecular docking analysis was conducted to study the interaction of Cu-doped TiO2 nanoparticles with multiple proteins namely β-lactamase (binding score: -4.91 kcal mol-1), ddlB (binding score: -5.67 kcal mol-1) and FabI (binding score: -6.13 kcal mol-1) as possible targets with active site residues. Dye degradation/reduction of control and Cu-doped samples were studied through absorption spectroscopy. The obtained outcomes of the performed experiment indicated that the photocatalytic activity of Cu-TiO2 enhanced with increasing dopant concentration, which is thought to be due to a decreased rate of electron-hole pair recombination. Consequently, it is suggested that Cu-TiO2 can be exploited as an effective candidate for antibacterial and dye degradation applications.

Bactericidal behavior of chemically exfoliated boron nitride nanosheets doped with zirconium

In this work, boron nitride nanosheets (BNNS) were produced through chemical exfoliation of bulk boron nitride (BN). Furthermore, hydrothermal technique was used to incorporate various concentrations (2.5, 5, 7.5, and 10 wt%) of zirconium (Zr) as a dopant. The prepared undoped and doped BN samples were evaluated for its antimicrobial activity against E. coli and S. aureus. Structural analysis was undertaken using x-ray diffraction which identified the presence of hexagonal BN. FTIR and Raman spectroscopy were utilized to outline IR fingerprint and electronic properties of the synthesized material. Morphological information was obtained through micrographs extracted using field emission scanning electron spectroscope (FESEM) and high resolution transmission electron microscope (HRTEM), while d-spacing was also calculated through HRTEM analysis. Optical properties and emission spectra were examined by applying UV–vis and photoluminescence spectroscope (PL); whereas, band gap analysis was carried out via Tauc plot. Zr-doped BN nanosheets at increasing concentrations (0.5, 1.0 mg/50 μl) revealed enhanced antibacterial activity against E. coli compared to S. aureus (p < 0.05).

Effect of iron doped titanium oxide encapsulated in alginate on photocatalytic activity for the removal of dye pollutants

Iron oxide/titania oxide are encapsulated in alginate biopolymer. These bio-nanocomposites are suitable for the photodegradation of dissimilar organic pollutants under UV irradiation as well as visible light.

Promising performance of chemically exfoliated Zr-doped MoS2 nanosheets for catalytic and antibacterial applications

Nanostructured materials incorporated with biological reducing agents have shown significant potential for use in bactericidal applications. Such materials have also demonstrated considerable efficacy to counter effects of chemical toxicity. In this study, nanostructured molybdenum disulfide (MoS₂) was doped with various concentrations (2.5, 5, 7.5, 10 wt%) of zirconium (Zr) using a hydrothermal route in order to assess its antimicrobial and catalytic potential. Doped and control samples were characterized with various techniques. X-ray diffraction (XRD) analysis confirmed the presence of the hexagonal phase of MoS₂ and identification of various functional groups and characteristic peaks (Mo bonding) was carried out using FTIR spectra. Micrographs obtained from FESEM and HR-TEM showed a sheet-like surface morphology, while agglomeration of nanosheets was observed upon doping with nanoparticles. To seek further clarity regarding the layered features of S–Mo–S planes, the defect densities and electronic band structure of pure MoS₂ and doped MoS₂ samples were investigated through Raman analysis. Optical properties of Zr-doped MoS₂ nanosheets were assessed using a UV-vis spectrophotometer and the results indicated a red-shift, i.e., movement of peaks towards longer wavelengths, of the material. Dynamics of migration and recombination of excited electron–hole pairs were investigated using PL spectroscopy, which was also used to confirm the presence of exfoliated nanosheets. In addition, the synthetic dye degradation potential of pure and doped samples was investigated in the presence of a reducing agent (NaBH₄). It was noted that doped MoS₂ showed superior catalytic activity compared to undoped MoS₂. The nanocatalyst synthesized in this study exhibited enhanced antibacterial activity against E. coli and S. aureus at high concentrations (0.5, 1.0 mg/50 μl). The present study suggests a cost-effective and environmentally friendly material that can be used to remove toxins such as synthetic dyes and tannery pollutants from industrial wastewater.

Nanostructured materials incorporated with biological reducing agents have shown significant potential for use in bactericidal applications.