Evaluation of root and canal morphology of mandibular premolar amongst Saudi subpopulation using the new system of classification: a CBCT study

Comprehensive analysis of root canal morphology in maxillary premolars among the Pakistani subpopulation: a CBCT-based study

BACKGROUND

Understanding the root canal morphology is essential for the success of root canal treatment. Therefore, this study aimed to evaluate and analyze the root canal configuration of maxillary premolars using Cone Beam Computed Tomography in the Pakistani subpopulation.

METHOD

This cross-sectional study utilized CBCT scans from two distinct centres: Aga Khan University in Karachi and Jinnah MRI and Body Scans in Lahore. The CBCT images were visualized using GALAXIS version 1.9 (SICAT GmbH and Co. KG, Bonn, Germany), integrated within the Sirona Dental System (D-64625 Bensheim, Germany). The scanning parameters were standardized at 85 kV, 7 mA, with a 15-s exposure time and a voxel size of 0.16 mm. A total of 707 CBCT scans were collected, encompassing 2180 maxillary premolars. Root canal configurations were classified based on (Ahmed et al. Int Endod J. 2017;50(8):761-70). Statistical analyses were performed using SPSS version 26, employing the Chi-square test with a significance level set at p < 0.05.

RESULTS

The distribution of root canal morphologies varied significantly with age and gender. Among maxillary premolars, 50% exhibited the typical configuration of 2MPMB1 L1 (two roots, single canal in each buccal and lingual root), while 26% of maxillary right second premolars displayed 1MPM1 (one root, one canal). Overall, 1MPM1 accounted for 27.4% of the total cases in the second premolars. There was no statistically significant relationship between age and root canal distribution in either first premolars (p = 0.338) or second premolars (p = 0.833). Regarding gender, a significant difference was observed in the distribution of right maxillary 1st premolars (p = 0.022*), with a higher prevalence among females.

CONCLUSION

This study offers significant insights into the anatomical variations of root canals in maxillary premolars across diverse regional subpopulations in Pakistan. While specific root canal configurations were prevalent, the findings indicate no statistically significant correlation between age and root canal morphology in maxillary premolars. However, a notable gender disparity was observed in the distribution of the right maxillary first premolars.

Exploring age and gender variations in root canal morphology of maxillary premolars in Saudi sub population: a cross-sectional CBCT study

BACKGROUND

In complex teeth like maxillary premolars, endodontic treatment success depends on a complete comprehension of root canal anatomy. The research on mandibular premolars' root canal anatomy has been extensive and well-documented in existing literature. However, there appears to be a notable gap in available data concerning the root canal anatomy of maxillary premolars. This study aimed to explore the root canal morphology of maxillary premolars using cone-beam computed tomography (CBCT) imaging, considering age and gender variations.

METHODS

From 500 patient CBCT scans, 787 maxillary premolar teeth were evaluated. The sample was divided by gender and age (10-20, 21-30, 31-40, 41-50, 51-60, and 61 years and older). Ahmed et al. classification system was used to record root canal morphology.

RESULTS

The most frequent classifications for right maxillary 1st premolars were 2MPM1 B1 L1 (39.03%) and 1MPM1 (2.81%), while the most frequent classifications for right maxillary 2nd premolars were 2MPM1 B1 L1 (39.08%) and 1MPM1 (17.85%). Most of the premolars typically had two roots (left maxillary first premolars: 81.5%, left maxillary second premolars: 82.7%, right maxillary first premolars: 74.4%, right maxillary second premolars: 75.7%). Left and right maxillary 1st premolars for classes 1MPM1 and 1MPM1-2-1 showed significant gender differences. For classifications 1MPM1 and 1MPM1-2-1, age-related changes were seen in the left and right maxillary first premolars.

CONCLUSION

This study provides novel insights into the root canal anatomy of maxillary premolars within the Saudi population, addressing a notable gap in the literature specific to this demographic. Through CBCT imaging and analysis of large sample sizes, the complex and diverse nature of root canal morphology in these teeth among Saudi individuals is elucidated. The findings underscore the importance of CBCT imaging in precise treatment planning and decision-making tailored to the Saudi population. Consideration of age and gender-related variations further enhances understanding and aids in personalized endodontic interventions within this demographic.

Assessment of the root and canal morphology in the permanent dentition of Saudi Arabian population using cone beam computed and micro-computed tomography - a systematic review

INTRODUCTION

Root canal treatment procedures require a thorough understanding of root and canal anatomy. The purpose of this systematic review was to examine the morphological differences of teeth root and their canals assessed using cone-beam computed and micro-computed tomography in Saudi Arabian population.

METHODOLOGY

An electronic search was conducted in PubMed / Medline, Scopus, Google Scholar, and Web of Science databases until January 2023 to retrieve related studies. "Root canal morphology," "Saudi Arabia," "Micro-CT," and "cone-beam computed tomography" were used as keywords. A modified version of previously published risk of bias assessment tool was used to determine the quality assessment of included studies.

RESULTS

The literature search revealed 47 studies that matched the criteria for inclusion, out of which 44 studies used cone beam computed tomography (CBCT) and three were micro-computed tomography (micro-CT) studies. According to the modified version of risk of bias assessment tool, the studies were categorized as low, moderate, and high risk of bias. A total of 47,612 samples were included which comprised of either maxillary teeth (5,412), or mandibular teeth (20,572), and mixed teeth (21,327). 265 samples were used in micro-CT studies while 47,347 teeth samples were used in CBCT studies. Among the CBCT studies, except for three, all the studies were retrospective studies. Frequently used imaging machine and software were 3D Accuitomo 170 and Morita's i-Dixel 3D imaging software respectively. Minimum and maximum voxel sizes were 75 and 300 μm, Vertucci's classification was mostly used to classify the root canal morphology of the teeth. The included micro-CT studies were in-vitro studies where SkyScan 1172 X-ray scanner was the imaging machine with pixel size ranging between 13.4 and 27.4 μm. Vertucci, Ahmed et al. and Pomeranz et al. classifications were applied to classify the root canal morphology.

CONCLUSION

This systematic review revealed wide variations in root and canal morphology of Saudi population using high resolution imaging techniques. Clinicians should be aware of the common and unusual root and canal anatomy before commencing root canal treatment. Future micro-CT studies are needed to provide additional qualitative and quantitative data presentations.

Evaluating the Internal Anatomy of Maxillary Premolars in an Adult Saudi Subpopulation Using 2 Classifications: A CBCT-Based Retrospective Study

BACKGROUND Understanding the root canal morphology is important for successful endodontic treatment. This retrospective cone-beam computed tomography (CBCT) study aimed to compare the adult maxillary premolars (MP), root, and canal morphology among a Saudi Arabian subpopulation based on Vertucci and Ahmed classifications. MATERIAL AND METHODS Scans of 1336 MP - 656 first premolars (MFP) and 680 second premolars (MSP) - were analyzed for the number of roots, morphology of the canals, and symmetry among them. The data were grouped based on the traditional preestablished Vertucci system and newer instantaneous code-based Ahmed classification. Comparative analysis was done using the chi-square test. RESULTS Two roots were common in MFP with 84.4% of the population, followed by those with 1 root and those with 3 roots. In MSP, single roots were more common. The results were non-significant with P values of 0.859 and 0.471, respectively. Most of these MFP had Type IV Vertucci configuration/²TNB¹P¹ Ahmed et al code (TN-tooth number, B-buccal canal, P-palatal canal). In MSP, Type I Vertucci/¹TN¹ Ahmed et al code was most common. However, the results were not statistically significant for the PM with P values of 0.997 and 0.732, respectively. Sex-based difference among them for the roots and root canals was also non-significant. Symmetry among PM in opposite quadrants was 87.1% in MFP and 90% in MSP. CONCLUSIONS Two roots with Type IV (²TNB¹P¹) and 1 root with Type I (¹TN¹) were most common in MFP and MSP, respectively. Symmetry among opposing PM was high.

Micro computed tomography (Micro-CT) characterization of root and root canal morphology of mandibular first premolars: a systematic review and meta-analysis

INTRODUCTION

Mandibular first premolars are familiar with their varied root canal morphology, causing difficulties and challenges for successful endodontic procedures. This systematic review and meta-analysis aim to study the characterization of root and canal morphology of the first mandibular premolar using micro-computed tomography.

METHODOLOGY

The literature search was conducted using electronic web databases like PubMed, Scopus, ScienceDirect and Cochrane with the chosen MeSH key words and data was retrieved until May 2023. Further to perform the statistical analysis, R v 4.3.1 software with "meta", 'metafor" "metaviz" " ggplot2" package was used, and results were represented by odds ratios (OR) and the percentage of forest plots along a 95 per cent confidence interval (CI).

RESULTS

The total number of studies meeting the inclusion criteria was 13; these studies were conducted on mandibular first premolar using Micro-CT; the total sample size was 1817. To scan the sample, an X-ray micro-focus CT system (Siemens Inveon CT, Erlangen, Germany) was used in four studies and seven different machines were used in the respective studies. Mimics 10.01 software (Materialize, Leuven, Belgium) and NRecon v.1.6.9 software (Bruker, Kontich, Belgium) were commonly operated. The minimum and maximum voxel size ranges between 11.94 and 50 μm. Vertucci's classification was frequently used (9), while one study applied Ahmed et al. and Vertucci's classification.

CONCLUSION

This systematic review provides essential information about the root and canal configurations, radicular grooves, accessory canals, and apical foramina through Micro-CT, aiming to improve the accuracy of endodontic treatment and help practitioners.

Microcomputed tomography (micro-CT) analysis of apical mandibular premolar in relation to clinical sign presentation: An in vitro study

Introduction

Variations in anatomic apex and apical foramina of root canals are common in different teeth types. The sophisticated 3D micro-CT aids researchers in investigating the apical morphology, such as the apical foramen (AF) and constriction (AC).

Objectives

To measure the length between the foramen and the apex and the physiological length to the apex, in lower premolar teeth. Furthermore, a measurement was conducted on the average length from the foramen to the apex of the lower premolar teeth with respect to the presence of clinical and non-clinical signs.

Methods

A total of 80 lower premolar teeth were selected based on the inclusion criteria. All samples were scanned using micro-CT ZEISS X-Radia (17 µm), and the datasets were analysed. The root canal AF and AC were reconstructed using Drishti software (V3.0) by utilising a 4-digit system code in millimetres (mm).

Results

More than half of the lower premolars (n = 47, 58.8 %) demonstrated a clinical signs presentation, while the rest had a non-clinical sign (n = 33, 41.3 %). There was a significant difference (p = 0.013) between the non-clinical and clinical groups in the mean length from the apical foramen to the apex (AFA) at 0.59 mm and 0.47 mm, respectively. Meanwhile, the non-clinical and clinical mean length from apical constriction to apex (ACA) were 0.75 mm and 0.73 mm, and the mean length from AF to AC (AFC) was 0.48 mm and 0.53 mm, respectively. Nonetheless, no significant differences were detected between the ACA and AFC of non-clinical and clinical groups.

Conclusion

The clinical signs presentation observed in lower premolars mainly affected the apical morphology, particularly the position and length of the root AF, and less so the AC position and length. Therefore, the information is useful for clinical purposes.

Bibliometric analysis: Root and root canal morphology using cone-beam computed tomography

OBJECTIVES

This bibliometric analysis aimed to evaluate the leading nations, authors, journals, institutes, highly cited publications, and most commonly used keywords concerning scientific publications based on root and root canal morphology using the CBCT.

MATERIAL AND METHODS

For this bibliometric analysis, an extensive search was carried out on September 25, 2023 using the Scopus database. Pertinent articles in the field were scrutinized after applying inclusion and exclusion criteria. Data were evaluated using Vosviewer and Microsoft Excel.

RESULTS

A literature search revealed the initiation of scientific publication in 2008. Significant contributions made by Saudi Arabia, India, and China concerning the number of publications were seen. Similarly, Jazan University from SA was recognized as the leading institute. The Journal of Endodontics was the leading journal, while authors JNR Martins and G Gambarini produced the highest number of papers.

CONCLUSIONS

This bibliometric analysis demonstrated that scientific publications have increased tremendously since 2008. Significant contributions have been made by developing and developed nations. The Journal of Endodontics and Jazan University have been identified as the leading journal and institute.