Individualized coracoid osteotomy and 3D congruent arc reconstruction of glenoid for the treatment of recurrent anterior shoulder dislocation

To further incorporate computer-aided designs to improve preoperative planning in total hip arthroplasty: a cohort study

Background

Hip replacement surgeries are increasing in demand, requiring rigorous improvements to a mature surgical protocol. Postoperative patient dissatisfaction mainly stems from postoperative complications resulting from the inappropriate selection of prostheses to meet the needs of each patient. This results in prosthesis loosening, hospital-related fractures, and postoperative complex pain, which can all be attributed to inappropriate sizing. In this study, we aimed to further explore the intraoperative and postoperative benefits of incorporating computer-aided design (CAD) in preoperative planning for total hip arthroplasty (THA).

Methods

A total of 62 patients requiring total hip replacement surgery from January 2021 to December 2021 were collected and randomly divided into a preoperative computer-aided simulated group and a conventional x-ray interpretation group. The accuracy of implant size selection (femoral and acetabular implant) between the preoperative planning and surgical procedure of the two groups was compared. Patient parameters, perioperative Harris hip scores, operative time (skin-to-skin time), surgical blood loss, and postoperative hospital stay were recorded, and the differences between the two groups were statistically compared using a single sample t-test.

Results

All patients in the study were successfully operated on and achieved good postoperative functional recovery. With CAD, the selection of the most suitable-sized prosthesis was significantly more accurate compared to the control group (accuracy of the acetabular component between the CAD/control: 80.6%/61.3%, and accuracy of the femoral component: 83.9%/67.7%). Intraoperative blood loss (177.4/231.0 ml, P = 0.002), operation time (84.2 ± 19.8 min/100.3 ± 25.9 min, P = 0.008), duration of hospital stay (6.5 ± 3/9.1 ± 3.9 days, P = 0.003), and postoperative Harris hip score (81.9 ± 6.5/74.7 ± 11.1, P = 0.003) were compared to the control group and showed statistical significance.

Conclusion

Incorporating CAD into the preoperative planning of total hip arthroplasty can effectively guide the selection of the most suitable-sized prosthesis, reduce intraoperative blood loss, and promote short-term functional recovery after THA.

Glenoid bone augmentation: a contemporary and comprehensive systematic review of open procedures

Introduction

There is a trend towards arthroscopically treating shoulder instability with glenoid deficiency. Despite this, there remains the option for treatment through an open technique. Multiple bone augmentation options are available for recurrent anterior shoulder instability.

Objective

To provide a systematic review of recent studies for recurrent anterior shoulder instability necessitating glenoid bone augmentation specifically through open procedures using coracoid bone or free bone blocks [iliac crest bone autograft/allograft or distal tibia allograft (DTA)].

Methods

PubMed, Cochrane, EMBASE, and Google Scholar were searched for studies reporting open glenoid bone augmentation procedures with iliac crest, tibia, or coracoid bones within 10 years. Extracted data included study/patient characteristics, techniques, prior surgeries, prior dislocations, radiographic findings, range of motion (ROM), recurrent instability, patient-reported outcomes, and complications.

Results

92 met inclusion criteria (5693 total patients). Six were studies of iliac crest bone, four of DTA, and 84 using the coracoid bone. 29 studies measured postoperative arthritis showing no development or mild arthritis. 26 studies reported postoperative graft position. 62 studies reported ROM noting decline in internal/external rotation. 87 studies measured postoperative instability with low rates. Rowe Scores with noted improvement across 31/59 (52.5%) studies were seen. Common post operative complications included infection, hematoma, graft fracture, nerve injury, pain, and screw-related irritation.

Conclusion

Despite a trend towards arthroscopic management of recurrent anterior shoulder instability with glenoid deficiency, open procedures continue to provide satisfactory outcomes. Additionally, studies have demonstrated safe and efficacious use of free bone block graft options in the primary and revision setting.

LINC00313 facilitates osteosarcoma carcinogenesis and metastasis through enhancing EZH2 mRNA stability and EZH2-mediated silence of PTEN expression

BACKGROUND

Osteosarcoma is one of the five leading causes of cancer death among all pediatric malignancies. Recent advances in non-coding RNAs suggested that many long noncoding RNAs (lncRNAs) are dysregulated in cancer tissues and play important roles in carcinogenesis. We aimed to further explore the mechanisms of Long Intergenic Non-Protein Coding RNA 313 (LINC00313)-promoted malignant phenotypes of osteosarcoma.

METHODS

The mRNA expressions were determined by quantitative real-time PCR. Protein levels were detected using Western blotting or immunohistochemistry staining. Protein binding to genomic DNA and RNA were measured using chromatin and RNA immunoprecipitation assay, respectively. CCK-8 and EdU incorporation assay were adopted to detect cell proliferation. Transwell assay was employed to assess the capacity of cell migration and invasion. The roles of LINC00313 and its target genes in tumorigenesis and metastasis of osteosarcoma were evaluated using subcutaneous xenograft models and tail vein inoculation models.

RESULTS

LINC00313 was elevated in osteosarcoma tissues compared with adjacent normal tissues. Higher LINC00313 was associated with advanced grades of osteosarcoma. LINC00313 promoted cell proliferation, migration, invasion in vitro and tumor growth as well as metastasis in vivo through inhibiting PTEN expression to promote AKT phosphorylation. Mechanistically, LINC00313 favored the interaction between FUS and EZH2, leading to the prolonged half-life of EZH2 mRNA, thereby in turn up-regulating EZH2 proteins and increasing EZH2-mediated epigenetic silence of PTEN.

CONCLUSION

LINC00313 exerted oncogene-like actions through increasing EZH2 mRNA stability, leading to PTEN deficiency in osteosarcoma.

A ligament tensor-guided extramedullary alignment technique for distal femoral cut in total knee replacement: results at a minimum 3 years follow-up

BACKGROUND

Femoral intramedullary canal referencing is used by most knee arthroplasty systems for distal femoral cut; to avoid the opening of the femoral canal different solutions have been presented such as navigation, patient-specific instruments (PSI) or the use of an extramedullary device. The FuZion^® system is a tensor device, created to merge the two main techniques for performing a total knee arthroplasty: the ligament balancing and measured resection techniques. Our idea was to use the tensor as an extramedullary cutting guide for the distal femoral cut, based on a 90° tibial resection.

METHODS

A total of 110 patients were operated on with this technique. Patients were evaluated with weight-bearing long-standing X-rays, knee a-p and lateral views, validated PROMs (Oxford Knee Score, EQ-5D and EQ-VAS), the Knee Society Scoring System (KSS) and the Forgotten Joint Score (FJS). Minimum follow up was 3 years (range 38-50 months).

RESULTS

Complete results were available for 104 patients (5 were lost in follow up and 1 died). Significant improvements were registered for all the evaluated scores from pre-op to the final follow up. Pre-op long-standing X-rays showed 21 valgus knees (20%) with a mean HKA of 187.6° (± 3.2°), 70 varus knees (62%) with a mean 172.2° (± 3.7°) HKA and 19 neutrally aligned knees, with a mean HKA of 179.5° (0 ± 2°). The radiographic evaluation at 3 months post-op showed 20 valgus knees (mean HKA 183.7° ± 1.5°), 67 varus knees (mean HKA 176.1° ± 1.8°) and 23 neutrally aligned knees with a mean HKA of 179.3° (0 ± 2°). At final follow up the survival rate was 100% for revision of the implant as the endpoint. With any reoperation as the endpoint Kaplan-Meier survival estimate showed a survival rate of 95.1% at 3 years.

CONCLUSIONS

This technique for performing a ligament driven alignment in total knee arthroplasty showed encouraging clinical outcomes at mid-term follow up leaving a residual deformity on the coronal plane.

Outcomes of the Latarjet Procedure Versus Free Bone Block Procedures for Anterior Shoulder Instability: A Systematic Review and Meta-analysis

BACKGROUND

Free bone block (FBB) procedures for anterior shoulder instability have been proposed as an alternative to or bail-out for the Latarjet procedure. However, studies comparing the outcomes of these treatment modalities are limited.

PURPOSE

To systematically review and perform a meta-analysis comparing the clinical outcomes of patients undergoing anterior shoulder stabilization with a Latarjet or FBB procedure.

STUDY DESIGN

Systematic review and meta-analysis; Level of evidence, 4.

METHODS

PubMed, Embase, and the Cochrane Library databases were systematically searched from inception to 2019 for human-participants studies published in the English language. The search was performed according to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) statement including studies reporting clinical outcomes of patients undergoing Latarjet or FBB procedures for anterior shoulder instability with minimum 2-year follow-up. Case reports and technique articles were excluded. Data were synthesized, and a random effects meta-analysis was performed to determine the proportions of recurrent instability, other complications, progression of osteoarthritis, return to sports, and patient-reported outcome (PRO) improvement.

RESULTS

A total of 2007 studies were screened; of these, 70 studies met the inclusion criteria and were included in the meta-analysis. These studies reported outcomes on a total of 4540 shoulders, of which 3917 were treated with a Latarjet procedure and 623 were treated with an FBB stabilization procedure. Weighted mean follow-up was 75.8 months (range, 24-420 months) for the Latarjet group and 92.3 months (range, 24-444 months) for the FBB group. No significant differences were found between the Latarjet and the FBB groups in the overall random pooled summary estimate of the rate of recurrent instability (5% vs 3%, respectively; P = .09), other complications (4% vs 5%, respectively; P = .892), progression of osteoarthritis (12% vs 4%, respectively; P = .077), and return to sports (73% vs 88%; respectively, P = .066). American Shoulder and Elbow Surgeons scores improved after both Latarjet and FBB, with a significantly greater increase after FBB procedures (10.44 for Latarjet vs 32.86 for FBB; P = .006). Other recorded PRO scores improved in all studies, with no significant difference between groups.

CONCLUSION

Current evidence supports the safety and efficacy of both the Latarjet and FBB procedures for anterior shoulder stabilization in the presence of glenoid bone loss. We found no significant differences between the procedures in rates of recurrent instability, other complications, osteoarthritis progression, and return to sports. Significant improvement in PROs was demonstrated for both groups. Significant heterogeneity existed between studies on outcomes of the Latarjet and FBB procedures, warranting future high-quality, comparative studies.

A 3-dimensional comparison of hand and power reamers in accuracy of glenoid retroversion correction

BACKGROUND

The study objective was to compare the reaming congruency of hand, power, and visual feedback axial alignment-guided (Marksman) reamers on glenoid models. We hypothesized that (1) a significant difference in average reaming deviation would be found between reamer types and (2) less ream-to-ream variation would occur with the Marksman reamer.

METHODS

Retroversion correction of 18 identical Sawbones glenoid models was conducted using either a hand, power, or Marksman reamer with a 40-mm curvature radius. Glenoid correction with either 0° or 10° reaming was conducted in triplicate sets for each reamer. Reamed glenoid computed tomography images were 3-dimensionally reconstructed using Mimics Medical software (version 21.0). Congruency between the glenoid surface and a 3-dimensional sphere with a 40-mm curvature radius was analyzed. Average deviation and ream-to-ream variance were compared between the hand, power, and Marksman reamer groups.

RESULTS

The power reamer demonstrated the smallest median deviation (0.08 mm; interquartile range [IQR], 0.07-0.19 mm), followed by the Marksman (0.09 mm; IQR, 0.08-0.17 mm) and hand (0.11 mm; IQR, 0.10-0.13 mm) reamers. Kruskal-Wallis analysis indicated no significant difference in deviation among the 3 reaming methods (P = .42). The Marksman reamer demonstrated the least variance (0.0034 mm), followed by the power (0.0076 mm) and hand (0.0093 mm) reamers. The results of the Conover squared ranks test indicated no significant difference in variance among the 3 reaming methods (P = .32).

CONCLUSION

Our findings showed no statistically significant difference in the accuracy or consistency of reaming between reamer types. Trends showed less variance in the Marksman reamer group compared with the hand and power reamer groups, although differences in variation between groups were not statistically significant.