Guiding osteogenesis of mesenchymal stem cells using carbon-based nanomaterials

Surface Deformation of Biocompatible Materials: Recent Advances in Biological Applications

The surface topography of substrates is a crucial factor that determines the interaction with biological materials in bioengineering research. Therefore, it is important to appropriately modify the surface topography according to the research purpose. Surface topography can be fabricated in various forms, such as wrinkles, creases, and ridges using surface deformation techniques, which can contribute to the performance enhancement of cell chips, organ chips, and biosensors. This review provides a comprehensive overview of the characteristics of soft, hard, and hybrid substrates used in the bioengineering field and the surface deformation techniques applied to the substrates. Furthermore, this review summarizes the cases of cell-based research and other applications, such as biosensor research, that utilize surface deformation techniques. In cell-based research, various studies have reported optimized cell behavior and differentiation through surface deformation, while, in the biosensor and biofilm fields, performance improvement cases due to surface deformation have been reported. Through these studies, we confirm the contribution of surface deformation techniques to the advancement of the bioengineering field. In the future, it is expected that the application of surface deformation techniques to the real-time interaction analysis between biological materials and dynamically deformable substrates will increase the utilization and importance of these techniques in various fields, including cell research and biosensors.

Advancements in Photothermal Therapy Using Near-Infrared Light for Bone Tumors

Bone tumors, particularly osteosarcoma, are prevalent among children and adolescents. This ailment has emerged as the second most frequent cause of cancer-related mortality in adolescents. Conventional treatment methods comprise extensive surgical resection, radiotherapy, and chemotherapy. Consequently, the management of bone tumors and bone regeneration poses significant clinical challenges. Photothermal tumor therapy has attracted considerable attention owing to its minimal invasiveness and high selectivity. However, key challenges have limited its widespread clinical use. Enhancing the tumor specificity of photosensitizers through targeting or localized activation holds potential for better outcomes with fewer adverse effects. Combinations with chemotherapies or immunotherapies also present avenues for improvement. In this review, we provide an overview of the most recent strategies aimed at overcoming the limitations of photothermal therapy (PTT), along with current research directions in the context of bone tumors, including (1) target strategies, (2) photothermal therapy combined with multiple therapies (immunotherapies, chemotherapies, and chemodynamic therapies, magnetic, and photodynamic therapies), and (3) bifunctional scaffolds for photothermal therapy and bone regeneration. We delve into the pros and cons of these combination methods and explore current research focal points. Lastly, we address the challenges and prospects of photothermal combination therapy.

BM-MSC-Loaded Graphene-Collagen Cryogels Ameliorate Neuroinflammation in a Rat Spinal Cord Injury Model

A major obstacle to axonal regeneration following spinal cord injury (SCI) is neuroinflammation mediated by astrocytes and microglial cells. We previously demonstrated that graphene-based collagen hydrogels alone can decrease neuroinflammation in SCI. Their regenerative potential, however, is poorly understood and incomplete. Furthermore, stem cells have demonstrated both neuroprotective and regenerative properties in spinal cord regeneration, although there are constraints connected with the application of stem cell-based therapy. In this study, we have analyzed the regeneration capability of human bone marrow mesenchymal stem cell (BM-MSC)-loaded graphene-cross-linked collagen cryogels (Gr-Col) in a thoracic (T10-T11) hemisection model of SCI. Our study found that BM-MSC-loaded Gr-Col improves axonal regeneration, reduces neuroinflammation by decreasing astrocyte reactivity, and promotes M2 macrophage polarization. BM-MSC-loaded-Gr-Col demonstrated enhanced regenerative potential compared to Gr-Col and the injury group control. Next-generation sequencing (NGS) analysis revealed that BM-MSC-loaded-Gr-Col modulates the JAK2-STAT3 pathway, thus decreasing the reactive and scar-forming astrocyte phenotype. The decrease in neuroinflammation in the BM-MSC-loaded-Gr-Col group is attributed to the modulation of Notch/Rock and STAT5a/b and STAT6 signaling. Overall, Gene Set Enrichment Analysis suggests the promising role of BM-MSC-loaded-Gr-Col in promoting axonal regeneration after SCI by modulating molecular pathways such as the PI3/Akt pathway, focal adhesion kinase, and various inflammatory pathways.

Graphene: A Multifaceted Carbon-Based Material for Bone Tissue Engineering Applications

Tissue engineering is an emerging technological field that aims to restore and replace human tissues. A significant number of individuals require bone replacement annually as a result of skeletal abnormalities or accidents. In recent decades, notable progress has been made in the field of biomedical research, specifically in the realm of sophisticated and biocompatible materials. The purpose of these biomaterials is to facilitate bone tissue regeneration. Carbon nanomaterial-based scaffolds are particularly notable due to their accessibility, mechanical durability, and biofunctionality. The scaffolds exhibit the capacity to enhance cellular proliferation, mitigate cell damage, induce bone tissue growth, and maintain biological compatibility. Therefore, they play a crucial role in the development of the bone matrix and the necessary cellular interactions required for bone tissue restoration. The attachment, growth, and specialization of osteogenic stem cells on biomaterial scaffolds play critical roles in bone tissue engineering. The optimal biomaterial should facilitate the development of bone tissue in a manner that closely resembles that of human bone. This comprehensive review encompasses the examination of graphene oxide (GO), carbon nanotubes (CNTs), fullerenes, carbon dots (CDs), nanodiamonds, and their respective derivatives. The biomaterial frameworks possess the ability to replicate the intricate characteristics of the bone microenvironment, thereby rendering them suitable for utilization in tissue engineering endeavors.

The influences of PEG-functionalized graphdiyne on cell growth and osteogenic differentiation of bone marrow mesenchymal stem cells

Guided bone regeneration (GBR) is a frequently used technique for patients with insufficient alveolar bone. The discovery of bone substitutes that can enhance osteogenesis is critical for GBR. Graphdiyne (GDY), a newly discovered carbon-based nanomaterial, has been recognized as the most stable allotrope of acetylene carbon and is anticipated to be able to promote osteogenesis. Whereas it still remains unknown whether it could enhance osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). In this study, GDY was modified with polyethylene glycol (PEG) and the influences of GDY-PEG at different concentrations on BMSCs cell growth and osteogenic differentiation were researched for the first time. In this study, we found that GDY-PEG at low concentration possessed premium bio-compatibility and revealed evident facilitation of BMSCs osteogenic differentiation. The cell growth and osteogenic differentiation of BMSCs treated with GDY-PEG were dose-dependent. GDY-PEG at 1 μg/mL demonstrated the optimal promoting effects of BMSCs osteogenic differentiation. Moreover, the regulating effect of BMSCs osteogenic differentiation by GDY-PEG might be associated with the Wnt/β-catenin signaling pathway. In all, the present study indicated a novel application of GDY in promoting bone tissue regeneration, providing a novel biomaterial for bone augmentation in clinics.

Electroactive Hydroxyapatite/Carbon Nanofiber Scaffolds for Osteogenic Differentiation of Human Adipose-Derived Stem Cells

Traditional bone defect treatments are limited by an insufficient supply of autologous bone, the immune rejection of allogeneic bone grafts, and high medical costs. To address this medical need, bone tissue engineering has emerged as a promising option. Among the existing tissue engineering materials, the use of electroactive scaffolds has become a common strategy in bone repair. However, single-function electroactive scaffolds are not sufficient for scientific research or clinical application. On the other hand, multifunctional electroactive scaffolds are often complicated and expensive to prepare. Therefore, we propose a new tissue engineering strategy that optimizes the electrical properties and biocompatibility of carbon-based materials. Here, a hydroxyapatite/carbon nanofiber (HAp/CNF) scaffold with optimal electrical activity was prepared by electrospinning HAp nanoparticle-incorporated polyvinylidene fluoride (PVDF) and then carbonizing the fibers. Biochemical assessments of the markers of osteogenesis in human adipose-derived stem cells (h-ADSCs) cultured on HAp/CNF scaffolds demonstrate that the material promoted the osteogenic differentiation of h-ADSCs in the absence of an osteogenic factor. The results of this study show that electroactive carbon materials with a fibrous structure can promote the osteogenic differentiation of h-ADSCs, providing a new strategy for the preparation and application of carbon-based materials in bone tissue engineering.

Advancements and Applications in the Composites of Silk Fibroin and Graphene-Based Materials

Silk fibroin and three kinds of graphene-based materials (graphene, graphene oxide, and reduced graphene oxide) have been widely investigated in biomedical fields. Recently, the hybrid composites of silk fibroin and graphene-based materials have attracted much attention owing to their combined advantages, i.e., presenting outstanding biocompatibility, mechanical properties, and excellent electrical conductivity. However, maintaining bio-toxicity and biodegradability at a proper level remains a challenge for other applications. This report describes the first attempt to summarize the hybrid composites’ preparation methods, properties, and applications to the best of our knowledge. We strongly believe that this review will open new doors for coming researchers.

Impact of Graphene Derivatives as Artificial Extracellular Matrices on Mesenchymal Stem Cells

Thanks to stem cells' capability to differentiate into multiple cell types, damaged human tissues and organs can be rapidly well-repaired. Therefore, their applicability in the emerging field of regenerative medicine can be further expanded, serving as a promising multifunctional tool for tissue engineering, treatments for various diseases, and other biomedical applications as well. However, the differentiation and survival of the stem cells into specific lineages is crucial to be exclusively controlled. In this frame, growth factors and chemical agents are utilized to stimulate and adjust proliferation and differentiation of the stem cells, although challenges related with degradation, side effects, and high cost should be overcome. Owing to their unique physicochemical and biological properties, graphene-based nanomaterials have been widely used as scaffolds to manipulate stem cell growth and differentiation potential. Herein, we provide the most recent research progress in mesenchymal stem cells (MSCs) growth, differentiation and function utilizing graphene derivatives as extracellular scaffolds. The interaction of graphene derivatives in human and rat MSCs has been also evaluated. Graphene-based nanomaterials are biocompatible, exhibiting a great potential applicability in stem-cell-mediated regenerative medicine as they may promote the behaviour control of the stem cells. Finally, the challenges, prospects and future trends in the field are discussed.

[Methods of improving the mechanical properties of hydrogels and their research progress in bone tissue engineering]

OBJECTIVE

To review the methods of improving the mechanical properties of hydrogels and the research progress in bone tissue engineering.

METHODS

The recent domestic and foreign literature on hydrogels in bone tissue engineering was reviewed, and the methods of improving the mechanical properties of hydrogels and the effect of bone repair in vivo and in vitro were summarized.

RESULTS

Hydrogels are widely used in bone tissue engineering, but their mechanical properties are poor. Improving the mechanical properties of hydrogels can enhance bone repair. The methods of improving the mechanical properties of hydrogels include the construction of dual network structures, inorganic nanoparticle composites, introduction of conductive materials, and fiber network reinforcement. These methods can improve the mechanical properties of hydrogels to various degrees while also demonstrating a significant bone repair impact.

CONCLUSION

The mechanical properties of hydrogels can be effectively improved by modifying the system, components, and fiber structure, and bone repair can be effectively promoted.

3D-printed bioresorbable poly(lactic-co-glycolic acid) and quantum-dot nanocomposites: Scaffolds for enhanced bone mineralization and inbuilt co-monitoring

Multifunctional 3D-printed nanocomposites based on poly(lactic-co-glycolic acid), that is, PLGA (RESOMER® LG857S) were developed for simultaneous monitoring of cells and scaffold as a function of time and spectral responses. These were achieved by impregnating carbon quantum dots (CQDs) on PLGA using melt-blending, plasticating extrusion, and 3D-printing. The nanocomposites enabled enhanced bio-affinity and cellular interactions for bone tissue engineering (TE). PLGA (control) and PLGA-CQD scaffolds were used for growing human adipose-derived-stem-cells (ADSCs) and tested for cell biocompatibility, cellular adhesion, growth, and osteogenesis. CQDs were found to enhance the hydrophilicity of nanocomposites and promote cellular nesting. MTS assays confirmed that CQDs on PLGA act as cell anchoring sites, thereby enhancing seeding efficiency and cell proliferation. Alkaline phosphate tests showed increased osteogenesis and Alizarin assays confirmed enhanced bone mineralization on PLGA-CQD. The qPCR tests based on selected mRNA expressions showed that the incorporation of CQDs significantly enhanced osteogenesis of ADSCs during all three phases of cell differentiation. The intrinsic luminescence of the composites allowed label-free monitoring of cell proliferation and bone mineralization on the scaffolds. Thus, the CQDs facilitated significant enhancements in composite processability with customized fabrication of 3D printed scaffolds, bone tissue osteoconductivity, and monitoring of cell-scaffold activities, offering multifunctional benefits for bone TE.

Recent Advances in Multicellular Tumor Spheroid Generation for Drug Screening

Multicellular tumor spheroids (MCTs) have been employed in biomedical fields owing to their advantage in designing a three-dimensional (3D) solid tumor model. For controlling multicellular cancer spheroids, mimicking the tumor extracellular matrix (ECM) microenvironment is important to understand cell-cell and cell-matrix interactions. In drug cytotoxicity assessments, MCTs provide better mimicry of conventional solid tumors that can precisely represent anticancer drug candidates' effects. To generate incubate multicellular spheroids, researchers have developed several 3D multicellular spheroid culture technologies to establish a research background and a platform using tumor modelingvia advanced materials science, and biosensing techniques for drug-screening. In application, drug screening was performed in both invasive and non-invasive manners, according to their impact on the spheroids. Here, we review the trend of 3D spheroid culture technology and culture platforms, and their combination with various biosensing techniques for drug screening in the biomedical field.

Nanomaterials and their composite scaffolds for photothermal therapy and tissue engineering applications

Photothermal therapy (PTT) has attracted broad attention as a promising method for cancer therapy with less severe side effects than conventional radiation therapy, chemotherapy and surgical resection. PTT relies on the photoconversion capacity of photothermal agents (PTAs), and a wide variety of nanomaterials have been employed as PTAs for cancer therapy due to their excellent photothermal properties. The PTAs are systematically or locally administered and become enriched in cancer cells to increase ablation efficiency. In recent years, PTAs and three-dimensional scaffolds have been hybridized to realize the local delivery of PTAs for the repeated ablation of cancer cells. Meanwhile, the composite scaffolds can stimulate the reconstruction and regeneration of the functional tissues and organs after ablation of cancer cells. A variety of composite scaffolds of photothermal nanomaterials have been prepared to combine the advantages of different modalities to maximize their therapeutic efficacy with minimal side effects. The synergistic effects make the composite scaffolds attractive for biomedical applications. This review summarizes these latest advances and discusses the future prospects.

Enhancing osteogenesis of adipose-derived mesenchymal stem cells using gold nanostructure/peptide-nanopatterned graphene oxide

Graphene derivatives are highly promising materials for use in stem-cell-based regenerative therapies, particularly for bone regeneration. Herein, we report a graphene oxide (GO)-based hybrid platform (GOHP) that is highly effective for guiding the osteogenesis of human adipose-derived mesenchymal stem cells (hAMSCs). A GO-coated indium tin oxide (ITO) substrate was electrochemically modified with Au nanostructures (GNSs), following which a cysteine-modified quadruple-branched arginine-glycine-aspartic acid was self-assembled on the ITO-GO-GNS hybrid via Au-S bonds. The synthesized GOHP, with the highest density of GNSs (deposition time of 120 s), exhibited the highest osteogenic differentiation efficiency based on the osteogenic marker expression level, osteocalcin expression, and osteoblastic mineralisation. Remarkably, although GO is known to be less efficient than the high-quality pure graphene synthesised via chemical vapour deposition (CVD), the fabricated GOHP exhibited an efficiency similar to that of CVD-grown graphene in guiding the osteogenesis of hAMSCs. The total RNA sequencing results revealed that CVD graphene and GOHP induced the osteogenesis of hAMSCs by upregulating the transcription factors related to direct osteogenesis, Wnt activation, and extracellular matrix deposition. Considering that GO is easy to produce, cost-effective, and biocompatible, the developed GOHP is highly promising for treating various diseases/disorders, including osteoporosis, rickets, and osteogenesis imperfecta.

[Advantages and challenges of carbon nanotubes as bone repair materials]

With the in-depth research on bone repair process, and the progress in bone repair materials preparation and characterization, a variety of artificial bone substitutes have been fully developed in the treatment of bone related diseases such as bone defects. However, the current various natural or synthetic biomaterials are still unable to achieve the structure and properties of natural bone. Carbon nanotubes (CNTs) have provided a new direction for the development of new materials in the field of bone repair due to their excellent structural stability, mechanical properties, and functional group modifiability. Moreover, CNTs and their composites have broad prospects in the design of bone repair materials and as drug delivery carriers. This paper describes the advantages of CNTs related to bone tissue regeneration from the aspects of morphology, chemistry, mechanics, electromagnetism, and biosafety, as well as the application of CNTs in drug delivery carriers and reinforcement components of scaffold materials. In addition, the potential problems and prospects of CNTs in bone regenerative medicine are discussed.

Recent Advances in Electrochemical Sensors for the Detection of Biomolecules and Whole Cells

Electrochemical sensors are considered an auspicious tool to detect biomolecules (e.g., DNA, proteins, and lipids), which are valuable sources for the early diagnosis of diseases and disorders. Advances in electrochemical sensing platforms have enabled the development of a new type of biosensor, enabling label-free, non-destructive detection of viability, function, and the genetic signature of whole cells. Numerous studies have attempted to enhance both the sensitivity and selectivity of electrochemical sensors, which are the most critical parameters for assessing sensor performance. Various nanomaterials, including metal nanoparticles, carbon nanotubes, graphene and its derivatives, and metal oxide nanoparticles, have been used to improve the electrical conductivity and electrocatalytic properties of working electrodes, increasing sensor sensitivity. Further modifications have been implemented to advance sensor platform selectivity and biocompatibility using biomaterials such as antibodies, aptamers, extracellular matrix (ECM) proteins, and peptide composites. This paper summarizes recent electrochemical sensors designed to detect target biomolecules and animal cells (cancer cells and stem cells). We hope that this review will inspire researchers to increase their efforts to accelerate biosensor progress-enabling a prosperous future in regenerative medicine and the biomedical industry.

Heavy metal removal applications using adsorptive membranes

Water is a significant natural resource for humans. As such, wastewater containing heavy metals is seen as a grave problem for the environment. Currently, adsorption is one of the common methods used for both water purification and wastewater treatment. Adsorption relies on the physical and chemical interactions between heavy metal ions and adsorbents. Adsorptive membranes (AMs) have demonstrated high effectiveness in heavy metal removal from wastewater owing to their exclusive structural properties. This article examines the applications of adsorptive membranes such as polymeric membranes (PMs), polymer-ceramic membranes (PCMs), electrospinning nanofiber membranes (ENMs), and nano-enhanced membranes (NEMs), which demonstrate high selectivity and adsorption capacity for heavy metal ions, as well as both advantages and disadvantages of each one all, are summarized and compared shortly. Moreover, the general theories for both adsorption isotherms and adsorption kinetics are described briefly to comprehend the adsorption process. This work will be valuable to readers in understanding the current applications of various AMs and their mechanisms in heavy metal ion adsorption, as well as the recycling methods in heavy ions desorption process are summarized and described clearly. Besides, the influences of morphological and chemical structures of AMs are presented and described in detail as well.

Long-term and label-free monitoring for osteogenic differentiation of mesenchymal stem cells using force sensor and impedance measurement

Stem cells have attracted increasing research interest in the field of regenerative medicine due to their unique abilities to differentiate into multiple cell lineages. Label-free, real-time, and long-term monitoring for stem cell differentiation is requisite in studying directional differentiation and development mechanisms for tissue engineering applications, but a great challenge because of the rigorous demands for sensitivity, stability and biocompatibility of devices. In this article, a label-free and real-time monitoring approach using a zinc oxide (ZnO) nanorod field effect transistor (FET) is proposed to detect cell traction forces (CTFs) exerted by cells on underlying substrates. The ZnO nanorod FET with the approach of difference-frequency lock-in detection achieves high sensitivity, good stability, and excellent biocompatibility, by which real-time and long-term (over 20 days) monitoring of cellular mechanical changes in osteogenic differentiation of mesenchymal stem cells (MSCs) is successfully achieved. We also employ electrical impedance monitoring using microelectrode array chips and microscopic observation to investigate cell migration and nodular aggregation behaviors of MSCs in osteogenic differentiation. Various biochemical assays including alkaline phosphatase (ALP), osteopontin expression and alizarin red staining are utilized to verify osteogenic differentiation of MSCs. We propose a combination of cell traction force measurement, impedance measurement and microscopic observation to provide multimodal profiling of cell morphology, and cellular biomechanical and electrophysiological phenotypes, which can track cellular dynamics in stem cell development and help to deeply understand the mechanism of osteogenic differentiation.

Microchip with Single-Cell Impedance Measurements for Monitoring Osteogenic Differentiation of Mesenchymal Stem Cells under Electrical Stimulation

Effective induction methods and in situ monitoring are essential for studying the mechanism of biological responses in stem cell differentiation. This article proposes an induction method incorporating electrical stimulation under an inhomogeneous field with single-cell impedance monitoring for studying osteogenic differentiation of mesenchymal stem cells (MSCs) using a microchip. The microchip contains an array of sextupole-electrode units for implementing a combination of controllable electrical stimulation and single-cell impedance measurements. MSCs are inducted to osteogenic differentiation under electrical stimulation using quadrupole electrodes and single-cell impedances are monitored in situ using a pair of microelectrodes at each unit center. The proposed microchip adopts an array design to monitor a number of MSCs in parallel, which improves measurement throughput and facilitates to carry out statistic tests. We perform osteogenic differentiation of MSCs on the microchip with and without electrical stimulation meanwhile monitoring single-cell impedance in real time for 21 days. The recorded impedance results show the detailed characteristic change of MSCs at the single-cell level during osteogenic differentiation, which demonstrates a significant difference between the conditions with and without electrical stimulation. The cell morphology and various staining analyses are also used to validate osteogenesis and correlate with the impedance expression. Correlation analysis of the impedance measurement, cell morphology, and various staining assays proves the great acceleration effect of the proposed electrical stimulation on osteogenic differentiation of MSCs. The proposed impedance method can monitor the dynamic process of cell development and study heterogeneity of stem cell differentiation at the single-cell level.

Graphene Hybrid Materials for Controlling Cellular Microenvironments

Cellular microenvironments are known as key factors controlling various cell functions, including adhesion, growth, migration, differentiation, and apoptosis. Many materials, including proteins, polymers, and metal hybrid composites, are reportedly effective in regulating cellular microenvironments, mostly via reshaping and manipulating cell morphologies, which ultimately affect cytoskeletal dynamics and related genetic behaviors. Recently, graphene and its derivatives have emerged as promising materials in biomedical research owing to their biocompatible properties as well as unique physicochemical characteristics. In this review, we will highlight and discuss recent studies reporting the regulation of the cellular microenvironment, with particular focus on the use of graphene derivatives or graphene hybrid materials to effectively control stem cell differentiation and cancer cell functions and behaviors. We hope that this review will accelerate research on the use of graphene derivatives to regulate various cellular microenvironments, which will ultimately be useful for both cancer therapy and stem cell-based regenerative medicine.

Supermagnetic Sugarcane Bagasse Hydrochar for Enhanced Osteoconduction in Human Adipose Tissue-Derived Mesenchymal Stem Cells

Hydrothermally carbonized sugarcane bagasse (SCB) has exceptional surface properties. Looking at the huge amount of SCB produced, its biocompatible nature, cheap-cost for carbonization, and its easy functionalization can give impeccable nano-biomaterials for tissue engineering applications. Herein, sugarcane bagasse was converted into hydrochar (SCB-H) by hydrothermal carbonation. The SCB-H produced was further modified with iron oxide (Fe₃O₄) nanoparticles (denoted as SCB-H@Fe₃O₄). Facile synthesized nano-bio-composites were characterized by SEM, HR-TEM, XRD, FT-IR, XPS, TGA, and VSM analysis. Bare Fe₃O₄ nanoparticles (NPs), SCB-H, and SCB-H@Fe₃O₄ were tested for cytocompatibility and osteoconduction enhancement of human adipose tissue-derived mesenchymal stem cells (hADMSCs). The results confirmed the cytocompatible and nontoxic nature of SCB-H@Fe₃O₄. SCB-H did not show enhancement in osteoconduction, whilst on the other hand, Fe₃O₄ NPs exhibited a 0.5-fold increase in the osteoconduction of hADMSCs. However, SCB-H@Fe₃O₄ demonstrated an excellent enhancement in osteoconduction of a 3-fold increase over the control, and a 2.5-fold increase over the bare Fe₃O₄ NPs. Correspondingly, the expression patterns assessment of osteoconduction marker genes (ALP, OCN, and RUNX2) confirmed the osteoconductive enhancement by SCB-H@Fe₃O₄. In the proposed mechanism, the surface of SCB-H@Fe₃O₄ might provide a unique topology, and anchoring to receptors of hADMSCs leads to accelerated osteogenesis. In conclusion, agriculture waste-derived sustainable materials like “SCB-H@Fe₃O₄₄” can be potentially applied in highly valued medicinal applications of stem cell differentiation.

Poly(Ethylene Glycol) Functionalized Graphene Oxide in Tissue Engineering: A Review on Recent Advances

Owing to the unique physical, chemical, mechanical and electrical properties, graphene and its derivatives have been extensively researched for diverse biomedical applications including in tissue engineering since the past decade. Tunable chemical functionalities of graphene oxide (GO), a graphene derivative, allow easy surface functionalization. Functionalization of GO with poly(ethylene glycol) (PEG) (PEG-GO) has received significant attention as it offers superior solubility, stability, and biocompatibility. Besides being an attractive candidate for drug delivery, PEG-GO can aid in the attachment, proliferation, and differentiation of stem cells, thereby augmenting tissue engineering. PEG-GO has shown excellent antibacterial efficacy, which could be an added advantage to minimize implant-associated infections. This review describes the synthesis techniques, properties, and biological potential of PEG-GO towards mammalian and bacterial cells. Studies wherein these nanomaterials have been explored for engineering various tissues are reviewed along with future opportunities in this field.

Altered Surface Hydrophilicity on Copolymer Scaffolds Stimulate the Osteogenic Differentiation of Human Mesenchymal Stem Cells

BACKGROUND

Recent studies have suggested that both poly(l-lactide-co-1,5-dioxepan-2-one) (or poly(LLA-co-DXO)) and poly(l-lactide-co-ε-caprolactone) (or poly(LLA-co-CL)) porous scaffolds are good candidates for use as biodegradable scaffold materials in the field of tissue engineering; meanwhile, their surface properties, such as hydrophilicity, need to be further improved.

METHODS

We applied several different concentrations of the surfactant Tween 80 to tune the hydrophilicity of both materials. Moreover, the modification was applied not only in the form of solid scaffold as a film but also a porous scaffold. To investigate the potential application for tissue engineering, human bone marrow mesenchymal stem cells (hMSCs) were chosen to test the effect of hydrophilicity on cell attachment, proliferation, and differentiation. First, the cellular cytotoxicity of the extracted medium from modified scaffolds was investigated on HaCaT cells. Then, hMSCs were seeded on the scaffolds or films to evaluate cell attachment, proliferation, and osteogenic differentiation. The results indicated a significant increasing of wettability with the addition of Tween 80, and the hMSCs showed delayed attachment and spreading. PCR results indicated that the differentiation of hMSCs was stimulated, and several osteogenesis related genes were up-regulated in the 3% Tween 80 group. Poly(LLA-co-CL) with 3% Tween 80 showed an increased messenger Ribonucleic acid (mRNA) level of late-stage markers such as osteocalcin (OC) and key transcription factor as runt related gene 2 (Runx2).

CONCLUSION

A high hydrophilic scaffold may speed up the osteogenic differentiation for bone tissue engineering.

Vertically Coated Graphene Oxide Micro-Well Arrays for Highly Efficient Cancer Spheroid Formation and Drug Screening

Research on the 3D culturing of cancer cells that better mimic in vivo solid tumors is important for efficient drug screening. Herein, a new platform that effectively facilitates the formation of cancer spheroids for anticancer drug screening is reported. Cytophilic graphene oxide (GO), when selectively coated on the sidewalls of micro-wells fabricated from a cell-adhesion-resistive polymer, is found to efficiently initiates distinct donut-like formation of cancer cell spheroids. Scanning electron microscopy and Raman mapping are used to analyze vertically coated GO micropatterns (vGO-MPs) of different sizes (100-250 µm) on polymer platforms, and human liver cancer cells (HepG2), as a model cancer, are seeded on these platforms. Remarkably, the 150 µm-sized platform is found to easily and rapidly generate 3D spheroids in the absence of cell-adhesion proteins. In addition, owing to the unique characteristics of GO, vGO-MPs are highly stable for long periods of time (≈1 month), even under harsh conditions (>70 °C). Moreover, the anticancer effects of two drugs (hydroxyurea and cisplatin) and the potential anticancer compound (curcumin) on HepG2 cells are demonstrated by simply measuring decreases in spheroid sizes. Hence, this new platform is highly promising as a cancer spheroid-forming material for rapid drug screening.

Bone Tissue Engineering via Carbon-Based Nanomaterials

Bone tissue engineering (BTE) has received significant attention due to its enormous potential in treating critical-sized bone defects and related diseases. Traditional materials such as metals, ceramics, and polymers have been widely applied as BTE scaffolds; however, their clinical applications have been rather limited due to various considerations. Recently, carbon-based nanomaterials attract significant interests for their applications as BTE scaffolds due to their superior properties, including excellent mechanical strength, large surface area, tunable surface functionalities, high biocompatibility as well as abundant and inexpensive nature. In this article, recent studies and advancements on the use of carbon-based nanomaterials with different dimensions such as graphene and its derivatives, carbon nanotubes, and carbon dots, for BTE are reviewed. Current challenges of carbon-based nanomaterials for BTE and future trends in BTE scaffolds development are also highlighted and discussed.

Promotion of Neuronal Guidance Growth by Aminated Graphene Oxide via Netrin-1/Deleted in Colorectal Cancer Signaling

Promotion of neurite outgrowth and synapse formation is a key step for nervous tissue regeneration. It is important for finding a new biomaterial to guide neuron growth to target neurons. Aminated graphene oxide (NH₂-GO) displays electrical properties and dispersibility, which may change the surface charge of neurons and further activate neuronal excitement. However, the molecular guidance mechanism of NH₂-GO on neurite outgrowth is seldom reported. In this study, we compared the role of NH₂-GO on the spinal cord neurons and cortical neurons. Results indicated that the proper concentrations were at 2 and 4 μg/mL as determined by the CCK-8 assay. Notably, NH₂-GO (2 and 4 μg/mL) improved the dispersibility and strengthened the effect of the composite material. In addition, it enables biocompatibility and efficient guidance of growth performance, which is not neurotoxic for neuronal outgrowth under these two concentrations. More interestingly, NH₂-GO at 2 μg/mL induced both marked neurite elongation and increased branches in cortical neurons, but there is no significant change of neurite length and branches in spinal cord neurons. Further, the fluorescence intensity and mRNA level of Netrin-1 and DCC (Deleted in Colorectal Cancer) were both enhanced by NH₂-GO at 2 μg/mL. Moreover, the function of Netrin-1 and DCC were activated more significantly by NH₂-GO at 2 μg/mL in cortical neurons than that of spinal cord neurons. When RhoA was inhibited by the C3 exoenzyme, phosphorylated Rac1 and Cdc42 expression decreased significantly. Thus, NH₂-GO at 2 μg/mL could influence Netrin-1/DCC signaling and the downstream RhoGTPase pathway, which may be preferred to guide the neurite growth in cortical neurons. It will provide a promising approach for the development of novel therapeutic methods of nerve regeneration.

Osteogenesis regulation of mesenchymal stem cells via autophagy induced by silica–titanium composite surfaces with different mechanical moduli

The high surface elastic modulus of the titanium (Ti) implant is one of the critical factors causing poor osteointegration between the implant surface and surrounding bone tissue.

Enhancing Neurogenesis of Neural Stem Cells Using Homogeneous Nanohole Pattern-Modified Conductive Platform

Biocompatible platforms, wherein cells attach and grow, are important for controlling cytoskeletal dynamics and steering stem cell functions, including differentiation. Among various components, membrane integrins play a key role in focal adhesion of cells (18-20 nm in size) and are, thus, highly sensitive to the nanotopographical features of underlying substrates. Hence, it is necessary to develop a platform/technique that can provide high flexibility in controlling nanostructure sizes. We report a platform modified with homogeneous nanohole patterns, effective in guiding neurogenesis of mouse neural stem cells (mNSCs). Sizes of nanoholes were easily generated and varied using laser interference lithography (LIL), by changing the incident angles of light interference on substrates. Among three different nanohole patterns fabricated on conductive transparent electrodes, 500 nm-sized nanoholes showed the best performance for cell adhesion and spreading, based on F-actin and lamellipodia/filopodia expression. Enhanced biocompatibility and cell adhesion of these nanohole patterns ultimately resulted in the enhanced neurogenesis of mNSCs, based on the mRNAs expression level of the mNSCs marker and several neuronal markers. Therefore, platforms modified with homogeneous nanohole patterns fabricated by LIL are promising for the precise tuning of nanostructures in tissue culture platforms and useful for controlling various differentiation lineages of stem cells.

Dual-Enhanced Raman Scattering-Based Characterization of Stem Cell Differentiation Using Graphene-Plasmonic Hybrid Nanoarray

Surface-enhanced Raman scattering (SERS) has demonstrated great potential to analyze a variety of bio/chemical molecular interactions within cells in a highly sensitive and selective manner. Despite significant advancements, it remains a critical challenge to ensure high sensitivity and selectivity, while achieving uniform signal enhancement and high reproducibility for quantitative detection of targeted biomarkers within a complex stem cell microenvironment. Herein, we demonstrate an innovative sensing platform, using graphene-coated homogeneous plasmonic metal (Au) nanoarrays, which synergize both electromagnetic mechanism (EM)- and chemical mechanism (CM)-based enhancement. Through the homogeneous plasmonic nanostructures, generated by laser interference lithography (LIL), highly reproducible enhancement of Raman signals could be obtained via a strong and uniform EM. Additionally, the graphene-functionalized surface simultaneously amplifies the Raman signals by an optimized CM, which aligns the energy level of the graphene oxide with the target molecule by tuning its oxidation levels, consequently increasing the sensitivity and accuracy of our sensing system. Using the dual-enhanced Raman scattering from both EM from the homogeneous plasmonic Au nanoarray and CM from the graphene surface, our graphene-Au hybrid nanoarray was successfully utilized to detect as well as quantify a specific biomarker (TuJ1) gene expression levels to characterize neuronal differentiation of human neural stem cells (hNSCs). Collectively, we believe our unique graphene-plasmonic hybrid nanoarray can be extended to a wide range of applications in the development of simple, rapid, and accurate sensing platforms for screening various bio/chemical molecules.

Applications of Carbon Nanotubes in Bone Tissue Regeneration and Engineering: Superiority, Concerns, Current Advancements, and Prospects

With advances in bone tissue regeneration and engineering technology, various biomaterials as artificial bone substitutes have been widely developed and innovated for the treatment of bone defects or diseases. However, there are no available natural and synthetic biomaterials replicating the natural bone structure and properties under physiological conditions. The characteristic properties of carbon nanotubes (CNTs) make them an ideal candidate for developing innovative biomimetic materials in the bone biomedical field. Indeed, CNT-based materials and their composites possess the promising potential to revolutionize the design and integration of bone scaffolds or implants, as well as drug therapeutic systems. This review summarizes the unique physicochemical and biomedical properties of CNTs as structural biomaterials and reinforcing agents for bone repair as well as provides coverage of recent concerns and advancements in CNT-based materials and composites for bone tissue regeneration and engineering. Moreover, this review discusses the research progress in the design and development of novel CNT-based delivery systems in the field of bone tissue engineering.

Versatile Biomaterial Platform Enriched with Graphene Oxide and Carbon Nanotubes for Multiple Tissue Engineering Applications

Carbon-based nanomaterials, such as graphene oxide (GO) or carbon nanotubes (CNTs) are currently used in various medical applications due to their positive influence on biocompatibility, adhesion, proliferation, and differentiation, as well as their contribution to modulating cell behavior in response to nanomaterial substrates. In this context, in this study, novel flexible membranes based on cellulose acetate (CA) enriched with CNT and GO in different percentages were tested for their versatility to be used as substrates for soft or hard tissue engineering (TE), namely, for their ability to support human adipose-derived stem cells (hASCs) adhesion during adipogenic or osteogenic differentiation. For this purpose, differentiation markers were assessed both at gene and protein levels, while histological staining was performed to show the evolution of the processes in response to CA-CNT-GO substrates. Micro-CT analysis indicated porous morphologies with open and interconnected voids. A slightly lower total porosity was obtained for the samples filled with the highest amount of GO and CNTs, but thicker walls, larger and more uniform pores were obtained, providing beneficial effects on cell behavior and increased mechanical stability. The addition of 1 wt% GO and CNT to the biocomposites enhanced hASCs adhesion and cytoskeleton formation. The evolution of both adipogenic and osteogenic differentiation processes was found to be augmented proportionally to the GO-CNT concentration. In conclusion, CA-CNT-GO biomaterials displayed good properties and versatility as platforms for cell differentiation with potential as future implantable materials in TE applications.

High density gold nanostructure composites for precise electrochemical detection of human embryonic stem cells in cell mixture

Precise detection of undifferentiated human pluripotent stem cells (hPSCs) and their entire subsequent elimination are incredibly important in preventing teratoma formations after transplantation. Recently, electrochemical sensing platforms have demonstrated immense potential as a new tool to detect remaining hPSCs in label-free and non-destructive manner. Nevertheless, one of the critical huddles of this electrochemical sensing approach is its low sensitivity since even low concentrations of remaining hPSCs were reported to form teratoma once transplanted. To address this issue, in this study, we report an engineering-based approach to improve the sensitivity of electrochemical sensing platform for hPSC detection. By optimizing the density of gold nanostructure and the matrigel concentration to improve both electro-catalytic property and biocompatibility, the sensitivity of the developed platform toward hESCs detection could reach 12,500 cells/chip, which is close to the known critical concentration of hPSCs (˜10,000 cells) that induce teratoma formation in vivo. Remarkably, the electrochemical signals were not detectable from other types of stem cell-derived endothelial cells (CB-EPCs) even at high concentrations of CB-EPCs (40,000 cells/chip), proving the high selectivity of the developed platform toward hPSC detection. Hence, the developed platform could be highly useful to solve the safety issues that are related with clinical application of hPSC-derived cells.

Biomaterials Enabled Cell-Free Strategies for Endogenous Bone Regeneration

Repairing bone defects poses a major orthopedic challenge because current treatments are constrained by the limited regenerative capacity of human bone tissue. Novel therapeutic strategies, such as stem cell therapy and tissue engineering, have the potential to enhance bone healing and regeneration, and hence may improve quality of life for millions of people. However, the ex vivo expansion of stem cells and their in vivo delivery pose technical difficulties that hamper clinical translation and commercial development. A promising alternative to cell delivery-based strategies is to stimulate or augment the inherent self-repair mechanisms of the patient to promote endogenous restoration of the lost/damaged bone. There is growing evidence indicating that increasing the endogenous regenerative potency of bone tissues for therapeutics will require the design and development of new generations of biomedical devices that provide key signaling molecules to instruct cell recruitment and manipulate cell fate for in situ tissue regeneration. Currently, a broad range of biomaterial-based deployment technologies are becoming available, which allow for controlled spatial presentation of biological cues required for endogenous bone regeneration. This article aims to explore the proposed concepts and biomaterial-enabled strategies involved in the design of cell-free endogenous techniques in bone regenerative medicine.

Surface functionalization of halloysite nanotubes with supermagnetic iron oxide, chitosan and 2-D calcium-phosphate nanoflakes for synergistic osteoconduction enhancement of human adipose tissue-derived mesenchymal stem cells

Halloysite nanotubes (HNTs) are known to be the highly emerging materials in nano-medicinal applications. However, comprehensive exploitation of HNTs for the regenerative medicinal applications is still necessary to be done. Therefore, towards enhancing the osteogenic potential of human adipose tissue-derived mesenchymal stem cells (hADMSCs), this study synthesized a novel and multifunctional nanoscaffold of chitosan (CTs) functionalized supermagnetic halloysite nanotubes (M-HNTs) decorated with the calcium phosphate 2-D nanoflakes (CaP) (termed as; M-HNTs-CTs-CaP). Stepwise modified nanoscaffolds were characterized by FE-SEM, FE-SEM-EDS, FE-HR-TEM, XPS, FT-IR and VSM analyses. The hADMSCs osteogenic potential was confirmed by calcification (Alizarin Red S staining), phosphate quantification and immunocytochemistry. Nanoscaffolds; CaP, M-HNTs-CaP and M-HNTs-CTs-CaP were significantly enhanced and up-regulated osteogenic potential compared to the HNTs, M-HNTs, M-HNTs-CTs. Among the nanoscaffolds studied, M-HNTs-CTs-CaP exhibited highest osteogenesis, due to the enhanced CaP distribution on M-HNTs-CTs surface, and synergistic osteoconduction contributed from Fe₃O₄, chitosan and CaP. Moreover, immunocytochemistry analysis and morphologically observation showed well differentiated osteoblast on the M-HNTs-CTs-CaP surface. Therefore, M-HNTs-CTs-CaP found to have a strong osteogenic potential of hADMSCs, and might be serve as highly applicable, next generation nanoscaffold for bone tissue engineering application.

Zero-Dimensional Carbon Dots Enhance Bone Regeneration, Osteosarcoma Ablation, and Clinical Bacterial Eradication

Zero-dimensional carbon dots (CD) and their effects on osteogenesis have been rarely studied in bone repair scaffolds. Here, we fabricate a novel CD doped chitosan/nanohydroxyapatite (CS/nHA/CD) scaffold with full potential to promote bone regeneration by a facile freeze-drying method. The CS/nHA/CD scaffolds enhanced cell adhesion and osteoinductivity in rat bone mesenchymal stem cells by up-regulating genes involved in focal adhesion and osteogenesis in vitro, which significantly improved the formation of vascularized new bone tissue at 4 weeks compared to pure CS/nHA scaffolds in vivo. Inspired by the excellent photothermal effect of CD, the scaffolds were applied in tumor photothermal therapy (PTT) under near-infrared (NIR) irradiation (808 nm, 1 W/cm2). The scaffolds significantly inhibited osteosarcoma cell proliferation in vitro and effectively suppressed tumor growth in vivo. Moreover, the CS/nHA/CD scaffolds possessed distinct antibacterial properties toward clinically collected S. aureus and E. coli, and their antibacterial activity was further enhanced under NIR irradiation. This work demonstrates that zero-dimensional CD can enhance the osteogenesis-inducing property of bone repair scaffolds and that CD doped scaffolds have potential for use in PTT for tumors and infections.

Electrochemical detection of dopamine using periodic cylindrical gold nanoelectrode arrays

Dopamine is a key molecule in neurotransmission and has been known to be responsible for several neurological diseases. Hence, its sensitive and selective detection is important for the early diagnosis of diseases related to abnormal levels of dopamine. In this study, we reported a new cylindrical gold nanoelectrode (CAuNE) platform fabricated via sequential laser interference lithography and electrochemical deposition. Among the fabricated electrodes, CAuNEs with a diameter of 700 nm, 150 s deposited, was found to be the best for electrochemical dopamine detection. According to cyclic voltammetry results, the linear range of the CAuNE-700 nm was 1-100 µM of dopamine with a limit of detection (LOD) of 5.83 µM. Moreover, owing to the homogeneous periodic features of CAuNEs, human neural cells were successfully cultured and maintained for more than 5 days in vitro without the use of any extracellular matrix proteins and dopamine was detectable in the presence of these cells on the electrode. Therefore, we concluded that the developed dopamine sensing platform CAuNE can be used for many applications including early diagnosis of neurological diseases; function tests of dopaminergic neurons derived from various stem cell sources; and toxicity assessments of drugs, chemicals, and nanomaterials on human neuronal cells.

Nanobiosensing Platforms for Real-Time and Non-Invasive Monitoring of Stem Cell Pluripotency and Differentiation

Breakthroughs in the biomedical and regenerative therapy fields have led to the influential ability of stem cells to differentiate into specific types of cells that enable the replacement of injured tissues/organs in the human body. Non-destructive identification of stem cell differentiation is highly necessary to avoid losses of differentiated cells, because most of the techniques generally used as confirmation tools for the successful differentiation of stem cells can result in valuable cells becoming irrecoverable. Regarding this issue, recent studies reported that both Raman spectroscopy and electrochemical sensing possess excellent characteristics for monitoring the behavior of stem cells, including differentiation. In this review, we focus on numerous studies that have investigated the detection of stem cell pluripotency and differentiation in non-invasive and non-destructive manner, mainly by using the Raman and electrochemical methods. Through this review, we present information that could provide scientific or technical motivation to employ or further develop these two techniques for stem cell research and its application.

Two-dimensional material-based bionano platforms to control mesenchymal stem cell differentiation

Background

In the past decade, stem cells, with their ability to differentiate into various types of cells, have been proven to be resourceful in regenerative medicine and tissue engineering. Despite the ability to repair damaged parts of organs and tissues, the use of stem cells still entails several limitations, such as low differentiation efficiency and difficulties in guiding differentiation. To address these limitations, nanotechnology approaches have been recently implemented in stem cell research. It has been discovered that stem cells, in combination with carbon-based functional materials, show enhanced regenerative performances in varying biophysical conditions. In particular, several studies have reported solutions to the conventional quandaries in biomedical engineering, using synergetic effects of nanohybrid materials, as well as further development of technologies to recover from diverse health conditions such as bone fracture and strokes.

Main text

In this review, we discuss several prior studies regarding the application of various nanomaterials in controlling the behavior of stem cells. We focus on the potential of different types of nanomaterials, such as two-dimensional materials, gold nanoparticles, and three-dimensional nanohybrid composites, to control the differentiation of human mesenchymal stem cells (hMSCs). These materials have been found to affect stem cell functions via the adsorption of growth/differentiation factors on the surfaces of nanomaterials and the activation of signaling pathways that are mostly related to cell adhesion and differentiation (e.g., FAK, Smad, Erk, and Wnt).

Conclusion

Controlling stem cell differentiation using biophysical factors, especially the use of nanohybrid materials to functionalize underlying substrates wherein the cells attach and grow, is a promising strategy to achieve cells of interest in a highly efficient manner. We hope that this review will facilitate the use of other types of newly discovered and/or synthesized nanomaterials (e.g., metal transition dichalcogenides, non-toxic quantum dots, and metal oxide frameworks) for stem cell-based regenerative therapies.

Three-Dimensional Graphene-RGD Peptide Nanoisland Composites That Enhance the Osteogenesis of Human Adipose-Derived Mesenchymal Stem Cells

Graphene derivatives have immense potential in stem cell research. Here, we report a three-dimensional graphene/arginine-glycine-aspartic acid (RGD) peptide nanoisland composite effective in guiding the osteogenesis of human adipose-derived mesenchymal stem cells (ADSCs). Amine-modified silica nanoparticles (SiNPs) were uniformly coated onto an indium tin oxide electrode (ITO), followed by graphene oxide (GO) encapsulation and electrochemical deposition of gold nanoparticles. A RGD–MAP–C peptide, with a triple-branched repeating RGD sequence and a terminal cysteine, was self-assembled onto the gold nanoparticles, generating the final three-dimensional graphene–RGD peptide nanoisland composite. We generated substrates with various gold nanoparticle–RGD peptide cluster densities, and found that the platform with the maximal number of clusters was most suitable for ADSC adhesion and spreading. Remarkably, the same platform was also highly efficient at guiding ADSC osteogenesis compared with other substrates, based on gene expression (alkaline phosphatase (ALP), runt-related transcription factor 2), enzyme activity (ALP), and calcium deposition. ADSCs induced to differentiate into osteoblasts showed higher calcium accumulations after 14–21 days than when grown on typical GO-SiNP complexes, suggesting that the platform can accelerate ADSC osteoblastic differentiation. The results demonstrate that a three-dimensional graphene–RGD peptide nanoisland composite can efficiently derive osteoblasts from mesenchymal stem cells.

Magnetic Force-Driven Graphene Patterns to Direct Synaptogenesis of Human Neuronal Cells

Precise control of axonal growth and synaptic junction formation are incredibly important to repair and/or to mimic human neuronal network. Here, we report a graphene oxide (GO)-based hybrid patterns that were proven to be excellent for guiding axonal growth and its consequent synapse formation of human neural cells. Unlike the previous method that utilized micro-contacting printing technique to generate GO patterns, here, GO-encapsulated magnetic nanoparticles were first synthesized and utilized as core materials wherein the external magnetic force facilitated the transfer of GO film to the desired substrate. Owing to the intrinsic property of GO that provides stable cell attachment and growth for long-term culture, human neuronal cells could be effectively patterned on the biocompatible polymer substrates with different pattern sizes. By using magnetic force-driven GO hybrid patterns, we demonstrated that accumulation and expression level of Synaptophysin of neurons could be effectively controlled with varying sizes of each pattern. The synaptic network between each neuron could be precisely controlled and matched by guiding axonal direction. This work provides treatment and modeling of brain diseases and spinal cord injuries.