Utility of virtual monoenergetic images from spectral detector computed tomography in improving image segmentation for purposes of 3D printing and modeling

Versatile Pickering emulsion gel lubricants stabilized by cooperative interfacial graphene oxide-polymer assemblies

Although a large number of water- and oil-based gel lubricants have found extensive potential applications in industrial and biomedical fields, developing new-type emulsion-based gel lubricants that may effectively integrate their characteristics and preponderances remains a significant challenge. Here a water-in-oil Pickering emulsion gel lubricant that is able to combine the high colloidal stability of traditional Pickering emulsions, the good swelling and corrosion resistance of oil-based gel lubricants, and the high cooling capacity of water-based gel lubricants prepared from a binary mixture of aqueous graphene oxide (GO) dispersion and diamino-functionalized polydimethylsiloxane oil solution in a broad concentration, pH, and water volume fraction range is reported. It can provide favourable lubrication for the Si3N4/steel and Si3N4/silicone tribopairs either in air or under water owing to the formation of a sturdy adsorbed oil film and ball-bearing actions of the GO particles. It can also be printed into various colourful 2D and 3D geometries upon direct extrusion into water, thanks to its water-in-oil nature and inherent shear-thinning and thixotropic properties, which further shows good prospects in underwater operations and artificial biomimetic organs. Our study may provide new insights into the design and preparation of novel semi-solid materials for diverse industrial, engineering, and biomedical applications.

Photon-counting CT in Thoracic Imaging: Early Clinical Evidence and Incorporation Into Clinical Practice

Photon-counting CT (PCCT) is an emerging advanced CT technology that differs from conventional CT in its ability to directly convert incident x-ray photon energies into electrical signals. The detector design also permits substantial improvements in spatial resolution and radiation dose efficiency and allows for concurrent high-pitch and high-temporal-resolution multienergy imaging. This review summarizes (a) key differences in PCCT image acquisition and image reconstruction compared with conventional CT; (b) early evidence for the clinical benefit of PCCT for high-spatial-resolution diagnostic tasks in thoracic imaging, such as assessment of airway and parenchymal diseases, as well as benefits of high-pitch and multienergy scanning; (c) anticipated radiation dose reduction, depending on the diagnostic task, and increased utility for routine low-dose thoracic CT imaging; (d) adaptations for thoracic imaging in children; (e) potential for further quantitation of thoracic diseases; and (f) limitations and trade-offs. Moreover, important points for conducting and interpreting clinical studies examining the benefit of PCCT relative to conventional CT and integration of PCCT systems into multivendor, multispecialty radiology practices are discussed.

Application of 3D printing technology in tumor diagnosis and treatment

3D printing technology is an increasing approach consisting of material manufacturing through the selective incremental delamination of materials to form a 3D structure to produce products. This technology has different advantages, including low cost, short time, diversification, and high precision. Widely adopted additive manufacturing technologies enable the creation of diagnostic tools and expand treatment options. Coupled with its rapid deployment, 3D printing is endowed with high customizability that enables users to build prototypes in shorts amounts of time which translates into faster adoption in the medical field. This review mainly summarizes the application of 3D printing technology in the diagnosis and treatment of cancer, including the challenges and the prospects combined with other technologies applied to the medical field.

Emerging 3D bioprinting applications in plastic surgery

Plastic surgery is a discipline that uses surgical methods or tissue transplantation to repair, reconstruct and beautify the defects and deformities of human tissues and organs. Three-dimensional (3D) bioprinting has gained widespread attention because it enables fine customization of the implants in the patient's surgical area preoperatively while avoiding some of the adverse reactions and complications of traditional surgical approaches. In this paper, we review the recent research advances in the application of 3D bioprinting in plastic surgery. We first introduce the printing process and basic principles of 3D bioprinting technology, revealing the advantages and disadvantages of different bioprinting technologies. Then, we describe the currently available bioprinting materials, and dissect the rationale for special dynamic 3D bioprinting (4D bioprinting) that is achieved by varying the combination strategy of bioprinting materials. Later, we focus on the viable clinical applications and effects of 3D bioprinting in plastic surgery. Finally, we summarize and discuss the challenges and prospects for the application of 3D bioprinting in plastic surgery. We believe that this review can contribute to further development of 3D bioprinting in plastic surgery and provide lessons for related research.

Role of three dimensional (3D) printing in endourology: An update from EAU young academic urologists (YAU) urolithiasis and endourology working group

The management of nephrolithiasis has been complemented well by modern technological advancements like virtual reality, three-dimensional (3D) printing etc. In this review, we discuss the applications of 3D printing in treating stone disease using percutaneous nephrolithotomy (PCNL) and retrograde intrarenal surgery (RIRS). PCNL surgeries, when preceded by a training phase using a 3D printed model, aid surgeons to choose the proper course of action, which results in better procedural outcomes. The 3D printed models have also been extensively used to train junior residents and novice surgeons to improve their proficiency in the procedure. Such novel measures include different approaches employed to 3D print a model, from 3D printing the entire pelvicalyceal system with the surrounding tissues to 3D printing simple surgical guides.

Improved characterization of focal airway lesions using spectral detector dual energy CT

Clinicians should be aware of SDCT as a useful tool in the assessment of focal airway lesions. Spectral detector dual-energy computed tomography (SDCT) is a relatively novel imaging technology which has been utilized to aid in the diagnosis of many cardiothoracic conditions. Specifically, the availability of generated iodine density maps, virtual monoenergetic images, and effective atomic number maps allow for better evaluation of thoracic lesions compared to conventional CT. SDCT has previously been shown to be useful in the differentiation of benign vs malignant pulmonary nodules, pleural lesions, and lymph nodes. We describe 3 cases in which a patient presents with an indeterminate tracheal or bronchial lesion on conventional CT and subsequent SDCT reconstructions provided additional information which helped guide diagnosis or management of the patient. The goal is to help clinicians understand the benefit of SDCT in the detection and workup of airway lesions.

Three-dimensional Printing in Orthopaedic Surgery: Current Applications and Future Developments

Three-dimensional (3D) printing is an exciting form of manufacturing technology that has transformed the way we can treat various medical pathologies. Also known as additive manufacturing, 3D printing fuses materials together in a layer-by-layer fashion to construct a final 3D product. This technology allows flexibility in the design process and enables efficient production of both off-the-shelf and personalized medical products that accommodate patient needs better than traditional manufacturing processes. In the field of orthopaedic surgery, 3D printing implants and instrumentation can be used to address a variety of pathologies that would otherwise be challenging to manage with products made from traditional subtractive manufacturing. Furthermore, 3D bioprinting has significantly impacted bone and cartilage restoration procedures and has the potential to completely transform how we treat patients with debilitating musculoskeletal injuries. Although costs can be high, as technology advances, the economics of 3D printing will improve, especially as the benefits of this technology have clearly been demonstrated in both orthopaedic surgery and medicine as a whole. This review outlines the basics of 3D printing technology and its current applications in orthopaedic surgery and ends with a brief summary of 3D bioprinting and its potential future impact.

Dual energy imaging in cardiothoracic pathologies: A primer for radiologists and clinicians

Recent advances in dual-energy imaging techniques, dual-energy subtraction radiography (DESR) and dual-energy CT (DECT), offer new and useful additional information to conventional imaging, thus improving assessment of cardiothoracic abnormalities. DESR facilitates detection and characterization of pulmonary nodules. Other advantages of DESR include better depiction of pleural, lung parenchymal, airway and chest wall abnormalities, detection of foreign bodies and indwelling devices, improved visualization of cardiac and coronary artery calcifications helping in risk stratification of coronary artery disease, and diagnosing conditions like constrictive pericarditis and valvular stenosis. Commercially available DECT approaches are classified into emission based (dual rotation/spin, dual source, rapid kilovoltage switching and split beam) and detector-based (dual layer) systems. DECT provide several specialized image reconstructions. Virtual non-contrast images (VNC) allow for radiation dose reduction by obviating need for true non contrast images, low energy virtual mono-energetic images (VMI) boost contrast enhancement and help in salvaging otherwise non-diagnostic vascular studies, high energy VMI reduce beam hardening artifacts from metallic hardware or dense contrast material, and iodine density images allow quantitative and qualitative assessment of enhancement/iodine distribution. The large amount of data generated by DECT can affect interpreting physician efficiency but also limit clinical adoption of the technology. Optimization of the existing workflow and streamlining the integration between post-processing software and picture archiving and communication system (PACS) is therefore warranted.

Pulmonary Embolism Versus Mimics on Dual-energy Spectral Computed Tomography: An Algorithmic Approach

Pulmonary embolism is a commonly encountered diagnosis that is traditionally identified on conventional computed tomography angiography. Dual-energy computed tomography (DECT) is a new technology that may aid the initial identification and differential diagnosis of pulmonary embolism. In this review, we present an algorithmic approach for assessing pulmonary embolism on DECT, including acute versus chronic pulmonary embolism, relationship to conventional computed tomography angiography, surrogate for likelihood of hemodynamic significance, and alternative diagnoses for DECT perfusion defects.

DICOM segmentation and STL creation for 3D printing: a process and software package comparison for osseous anatomy

BACKGROUND

Extracting and three-dimensional (3D) printing an organ in a region of interest in DICOM images typically calls for segmentation as a first step in support of 3D printing. The DICOM images are not exported to STL data immediately, but segmentation masks are exported to STL models. After primary and secondary processing, including noise removal and hole correction, the STL data can be 3D printed. The quality of the 3D model is directly related to the quality of the STL data. This study focuses and reports on the DICOM to STL segmentation performance for nine software packages.

METHODS

Multidetector row CT scanning was performed on a dry human mandible with two 10-mm-diameter bearing balls as a phantom. The DICOM image file was then segmented and exported to an STL file using nine different commercial/open-source software packages. Once the STL models were created, the data (file) properties and the size and volume of each file were measured, and differences across the software packages were noted. Additionally, to evaluate differences between the shapes of the STL models by software package, each pair of STL models was superimposed, with the observed differences between their shapes characterized as the shape error.

RESULTS

The data (file) size of the STL file and the number of triangles that constitute each STL model were different across all software packages, but no statistically significant differences were found across software packages. The created ball STL model expanded in the X-, Y-, and Z-axis directions, with the length in the Z-axis direction (body axis direction) being slightly longer than that in the other directions. The mean shape error between software packages of the mandibular STL model was 0.11 mm, but there was no statistically significant difference between them.

CONCLUSIONS

Our results revealed that there are some differences between the software packages that perform the segmentation and STL creation of the DICOM image data. In particular, the features of each software package appeared in the fine and thin areas of the osseous structures. When using these software packages, it is necessary to understand the characteristics of each.

Utility of Iodine Density Perfusion Maps From Dual-Energy Spectral Detector CT in Evaluating Cardiothoracic Conditions: A Primer for the Radiologist

OBJECTIVE. The purpose of this article is to outline the utility of iodine density maps for evaluating cardiothoracic disease and abnormalities. Multiple studies have shown that the variety of images generated from dual-energy spectral detector CT (SDCT) improve identification of cardiothoracic conditions. CONCLUSION. Understanding the technique of SDCT and being familiar with the features of different cardiothoracic conditions on iodine density map images help the radiologist make a better diagnosis.