LM-Jelly: Liquid Metal Enabled Biomimetic Robotic Jellyfish

Jellyfish have attracted worldwide attention owing to their fantastic moving styles, which also inspired development in soft robotics to meet the demands of underwater surveillance. In this study, a soft robotic jellyfish integrated liquid metal coil, and magnetic field is proposed for the first time to mimic the soft rowing propulsion of oblate jellyfish. The soft robotic jellyfish is actuated by the entirely soft electromagnetic actuators that enabled the gentle motion. Through conceptual experiments and computational fluid dynamics simulations, we systematically interpreted the mechanism of this robotic jellyfish and various factors to dominate its movement behaviors, which involve vortex formation and ascending modalities. Besides, underwater monitoring and bio-friendliness of robotic jellyfish were also demonstrated to illustrate its potential application scenarios and gentle motion characteristics. This study will help to broaden the vistas for liquid metal enabled bionic robotics in a wide range of underwater applications.

Propulsion optimization of a jellyfish-inspired robot based on a nonintrusive reduced-order model with proper orthogonal decomposition

In this research, the propulsion of the proposed jellyfish-inspired mantle undulated propulsion robot (MUPRo) is optimized. To reliably predict the hydrodynamic forces acting on the robot, the proposed nonintrusive reduced-order model (NIROM) based on proper orthogonal decomposition (POD) additionally considers the POD basis that makes an important contribution to the features on the specified boundary. The proposed model establishes a mapping between the parameter-driven motion of the mantle and the evolution of the fluid characteristics around the swimmer. Moreover, to predict new cases where the input needs to be updated, the input of the proposed model is taken from the kinematics of the robot rather than extracted from full-order high-fidelity models. In this paper, it takes approximately 950 s to perform a simulation using the full-order high-fidelity model. However, the computational cost for one prediction with the proposed POD-NIROM is around 0.54 s, of which about 0.2 s is contributed by preprocessing. Compared with the NIROM based on the classic POD method, the proposed POD-NIROM can effectively update the input and reasonably predict the characteristics on the boundary. The analysis of the hydrodynamic performance of the MUPRo pinpoints that, over a certain period and with a certain undulation amplitude, the hydrodynamic force generated by the swinging-like mantle motion (k< 0.5) is greater, outperformingAequorea victoriain startup acceleration. It is demonstrated that considering a certain power loss and a certain tail beat amplitude, the wave-like mantle motion (k> 0.5) can produce greater propulsion, which means higher propulsion efficiency.

Exploring the sensitivity in jellyfish locomotion under variations in scale, frequency, and duty cycle

Jellyfish have been called one of the most energy-efficient animals in the world due to the ease in which they move through their fluid environment, by product of their bell kinematics coupled with their morphological, muscular, material properties. We investigated jellyfish locomotion by conducting in silico comparative studies and explored swimming performance across different fluid scales (i.e., Reynolds Number), bell contraction frequencies, and contraction phase kinematics (duty cycle) for a jellyfish with a fineness ratio of 1 (ratio of bell height to bell diameter). To study these relationships, an open source implementation of the immersed boundary method was used (IB2d) to solve the fully coupled fluid-structure interaction problem of a flexible jellyfish bell in a viscous fluid. Thorough 2D parameter subspace explorations illustrated optimal parameter combinations in which give rise to enhanced swimming performance. All performance metrics indicated a higher sensitivity to bell actuation frequency than fluid scale or duty cycle, via Sobol sensitivity analysis, on a higher performance parameter subspace. Moreover, Pareto-like fronts were identified in the overall performance space involving the cost of transport and forward swimming speed. Patterns emerged within these performance spaces when highlighting different parameter regions, which complemented the global sensitivity results. Lastly, an open source computational model for jellyfish locomotion is offered to the science community that can be used as a starting place for future numerical experimentation.

Numerical Simulation of Self-Propelled Steady Jet Propulsion at Intermediate Reynolds Numbers: Effects of Orifice Size on Animal Jet Propulsion

Most marine jet-propelled animals have low swimming efficiencies and relatively small jet orifices. Motivated by this, the present computational fluid dynamics study simulates the flow for a jet-propelled axisymmetric body swimming steadily at intermediate Reynolds numbers of order 1–1000. Results show that swimming-imposed flow field, drag coefficients, swimming efficiencies, and performance index (a metric comparing swimming speeds sustained by differently sized orifices ejecting the same volume flow rate) all depend strongly on orifice size, and orifice size affects the configuration of oppositely signed body vorticity and jet vorticity, thereby affecting wake and efficiency. As orifice size decreases, efficiencies decrease considerably, while performance index increases substantially, suggesting that, for a given jet volume flow rate, a smaller orifice supports faster swimming than a larger one does, albeit at reduced efficiency. These results support the notion that most jet-propelled animals having relatively small jet orifices may be an adaptation to deal with the physical constraint of limited total volume of water available for jetting, while needing to compete for fast swimming. Finally, jet orifice size is discussed regarding the role of jet propulsion in jet-propelled animal ecology, particularly for salps that use two relatively large siphons to respectively draw in and expel water.

Cool your jets: biological jet propulsion in marine invertebrates

Pulsatile jet propulsion is a common swimming mode used by a diverse array of aquatic taxa from chordates to cnidarians. This mode of locomotion has interested both biologists and engineers for over a century. A central issue to understanding the important features of jet-propelling animals is to determine how the animal interacts with the surrounding fluid. Much of our knowledge of aquatic jet propulsion has come from simple theoretical approximations of both propulsive and resistive forces. Although these models and basic kinematic measurements have contributed greatly, they alone cannot provide the detailed information needed for a comprehensive, mechanistic overview of how jet propulsion functions across multiple taxa, size scales and through development. However, more recently, novel experimental tools such as high-speed 2D and 3D particle image velocimetry have permitted detailed quantification of the fluid dynamics of aquatic jet propulsion. Here, we provide a comparative analysis of a variety of parameters such as efficiency, kinematics and jet parameters, and review how they can aid our understanding of the principles of aquatic jet propulsion. Research on disparate taxa allows comparison of the similarities and differences between them and contributes to a more robust understanding of aquatic jet propulsion.

Probabilistic modeling to estimate jellyfish ecophysiological properties and size distributions

While Ocean modeling has made significant advances over the last decade, its complex biological component is still oversimplified. In particular, modeling organisms in the ocean system must integrate parameters to fit both physiological and ecological behaviors that are together very difficult to determine. Such difficulty occurs for modeling Pelagia noctiluca. This jellyfish has a high abundance in the Mediterranean Sea and could contribute to several biogeochemical processes. However, gelatinous zooplanktons remain poorly represented in biogeochemical models because uncertainties about their ecophysiology limit our understanding of their potential role and impact. To overcome this issue, we propose, for the first time, the use of the Statistical Model Checking Engine (SMCE), a probability-based computational framework that considers a set of parameters as a whole. Contrary to standard parameter inference techniques, SMCE identifies sets of parameters that fit both laboratory-culturing observations and in situ patterns while considering uncertainties. Doing so, we estimated the best parameter sets of the ecophysiological model that represents the jellyfish growth and degrowth in laboratory conditions as well as its size. Behind this application, SMCE remains a computational framework that supports the projection of a model with uncertainties in broader contexts such as biogeochemical processes to drive future studies.

From single neurons to behavior in the jellyfish Aurelia aurita

Jellyfish nerve nets provide insight into the origins of nervous systems, as both their taxonomic position and their evolutionary age imply that jellyfish resemble some of the earliest neuron-bearing, actively-swimming animals. Here, we develop the first neuronal network model for the nerve nets of jellyfish. Specifically, we focus on the moon jelly Aurelia aurita and the control of its energy-efficient swimming motion. The proposed single neuron model disentangles the contributions of different currents to a spike. The network model identifies factors ensuring non-pathological activity and suggests an optimization for the transmission of signals. After modeling the jellyfish's muscle system and its bell in a hydrodynamic environment, we explore the swimming elicited by neural activity. We find that different delays between nerve net activations lead to well-controlled, differently directed movements. Our model bridges the scales from single neurons to behavior, allowing for a comprehensive understanding of jellyfish neural control of locomotion.

Naut Your Everyday Jellyfish Model: Exploring How Tentacles and Oral Arms Impact Locomotion

Jellyfish are majestic, energy-efficient, and one of the oldest species that inhabit the oceans. It is perhaps the second item, their efficiency, that has captivated scientists for decades into investigating their locomotive behavior. Yet, no one has specifically explored the role that their tentacles and oral arms may have on their potential swimming performance. We perform comparative in silico experiments to study how tentacle/oral arm number, length, placement, and density affect forward swimming speeds, cost of transport, and fluid mixing. An open source implementation of the immersed boundary method was used (IB2d) to solve the fully coupled fluid–structure interaction problem of an idealized flexible jellyfish bell with poroelastic tentacles/oral arms in a viscous, incompressible fluid. Overall tentacles/oral arms inhibit forward swimming speeds, by appearing to suppress vortex formation. Nonlinear relationships between length and fluid scale (Reynolds Number) as well as tentacle/oral arm number, density, and placement are observed, illustrating that small changes in morphology could result in significant decreases in swimming speeds, in some cases by upwards of 80–90% between cases with or without tentacles/oral arms.

Jet-paddling jellies: swimming performance in the Rhizostomeae jellyfish Catostylus mosaicus

Jellyfish are a successful and diverse class of animals that swim via jet propulsion, with swimming performance and propulsive efficiency being related to the animal's feeding ecology and body morphology. The Rhizostomeae jellyfish lack tentacles but possess four oral lobes and eight trailing arms at the centre of their bell, giving them a body morphology quite unlike that of other free-swimming medusae. The implications of this body morphology on the mechanisms by which thrust is produced are unknown. Here, we determined the wake structure and propulsive efficiency in the blue-blubber jellyfish Catostylus mosaicus (order: Rhizostomeae). The animal is propelled during both bell contraction and bell relaxation by different thrust-generating mechanisms. During bell contraction, a jet of fluid is expelled from the subumbrellar cavity, which results from the interaction between the counter-rotating stopping (from the preceding contraction cycle) and starting vortices, creating a vortex superstructure and propulsion. This species is also able to utilise passive energy recapture, which increases the animal's swimming velocity towards the end of the bell expansion phase when the bell diameter is constant. The thrust produced during this phase is the result of the flexible bell margin manoeuvring the stopping vortex into the subumbrellar cavity during bell relaxation, enhancing its circulation, and creating a region of high pressure on the inner surface of the bell and, consequently, thrust. These mechanisms of thrust generation result in C. mosaicus having a relatively high propulsive efficiency compared with other swimmers, indicating that economical locomotion could be a contributing factor in the ecological success of these medusan swimmers.

Design considerations for an underwater soft-robot inspired from marine invertebrates

This article serves as an overview of the unique challenges and opportunities made possible by a soft, jellyfish inspired, underwater robot. We include a description of internal pressure modeling as it relates to propulsive performance, leading to a desired energy-minimizing volume flux program. Strategies for determining optimal actuator placement derived from biological body motions are presented. In addition a feedback mechanism inspired by the epidermal line sensory system of cephalopods is presented, whereby internal pressure distribution can be used to determine pertinent deformation parameters.

Identifying and modeling motion primitives for the hydromedusae Sarsia tubulosa and Aequorea victoria

The movements of organisms can be thought of as aggregations of motion primitives: motion segments containing one or more significant actions. Here, we present a means to identify and characterize motion primitives from recorded movement data. We address these problems by assuming that the motion sequences can be characterized as a series of dynamical-system-based pattern generators. By adopting a nonparametric, Bayesian formalism for learning and simplifying these pattern generators, we arrive at a purely data-driven model to automatically identify breakpoints in the movement sequences. We apply this model to swimming sequences from two hydromedusa. The first hydromedusa is the prolate Sarsia tubulosa, for which we obtain five motion primitives that correspond to bell cavity pressurization, jet formation, jetting, cavity fluid refill, and coasting. The second hydromedusa is the oblate Aequorea victoria, for which we obtain five motion primitives that correspond to bell compression, vortex separation, cavity fluid refill, vortex formation, and coasting. Our experimental results indicate that the breakpoints between primitives are correlated with transitions in the bell geometry, vortex formation and shedding, and changes in derived dynamical quantities. These dynamics quantities include terms like pressure, power, drag, and thrust. Such findings suggest that dynamics information is inherently present in the observed motions.

Ontogenetic propulsive transitions by medusae Sarsia tubulosa

While swimming in their natural environment, marine organisms must successfully forage, escape from predation, and search for mates to reproduce. In the process, planktonic organisms interact with their fluid environment, generating fluid signatures around their body and in their downstream wake through ontogeny. In the early stages of their life cycle, marine organisms operate in environments where viscous effects dominate and govern physical processes. Ontogenetic propulsive transitions in swimming organisms often involve dramatic changes in morphology and swimming behavior. However, for organisms that do not undergo significant changes in morphology, swimming behavior, or propulsive mode, how is their swimming performance affected?

We investigated the ontogenetic propulsive transitions of the hydromedusa Sarsia tubulosa, which utilizes jet propulsion and possesses similar bell morphology throughout its life cycle. We used digital particle image velocimetry and high-speed imaging to measure the body kinematics, velocity fields, and wake structures induced by swimming S. tubulosa from 1 mm to 10 mm bell exit diameters. Our experimental observations revealed three distinct classes of hydrodynamic wakes: elongated vortex rings for 10&lt;Re&lt;30 (1 to 2 mm bell exit diameter), classical elliptical vortex rings for Re&gt;30 (larger than 2 mm bell exit diameter), and in most instances where Re&gt;100 (larger than 4 or 5 mm bell exit diameter), elliptical vortex rings (or leading vortex rings) were followed by trailing jets. The relative travel distance and propulsive efficiency remained unchanged throughout ontogeny, and the swimming proficiency and hydrodynamic cost of transport decreased nonlinearly.

Cyanea capillata bell kinematics analysis through corrected in situ imaging and modeling using strategic discretization techniques

Obtaining accurate kinematic data of animals is essential for many biological studies and bio-inspired engineering. Many animals, however, are either too large or too delicate to transport to controlled environments where accurate kinematic data can be easily obtained. Often, in situ recordings are the only means available but are often subject to multi-axis motion and relative magnification changes with time leading to large discrepancies in the animal kinematics. Techniques to compensate for these artifacts were applied to a large jellyfish, Cyanea capillata, freely swimming in ocean waters. The bell kinematics were captured by digitizing exumbrella profiles for two full swimming cycles. Magnification was accounted for by tracking a reference point on the ocean floor and by observing the C. capillata exumbrella arclength in order to have a constant scale through the swimming cycles. A linear fit of the top bell section was used to find the body angle with respect to the camera coordinate system. Bell margin trajectories over two swimming cycles confirmed the accuracy of the correction techniques. The corrected profiles were filtered and interpolated to provide a set of time-dependent points along the bell. Discrete models of the exumbrella were used to analyze the bell kinematics. Exumbrella discretization was conducted using three different methods. Fourier series were fitted to the discretized models and subsequently used to analyze the bell kinematics of the C. capillata. The analysis showed that the bell did not deform uniformly over time with different segments lagging behind each other. Looping of the bell trajectory between contraction and relaxation was also present through most of the exumbrella. The bell margin had the largest looping with an outer path during contraction and inner path during relaxation. The subumbrella volume was approximated based on the exumbrella kinematics and was found to increase during contraction.

Flexible margin kinematics and vortex formation of Aurelia aurita and Robojelly

The development of a rowing jellyfish biomimetic robot termed as “Robojelly”, has led to the discovery of a passive flexible flap located between the flexion point and bell margin on the Aurelia aurita. A comparative analysis of biomimetic robots showed that the presence of a passive flexible flap results in a significant increase in the swimming performance. In this work we further investigate this concept by developing varying flap geometries and comparing their kinematics with A. aurita. It was shown that the animal flap kinematics can be replicated with high fidelity using a passive structure and a flap with curved and tapered geometry gave the most biomimetic performance. A method for identifying the flap location was established by utilizing the bell curvature and the variation of curvature as a function of time. Flaps of constant cross-section and varying lengths were incorporated on the Robojelly to conduct a systematic study of the starting vortex circulation. Circulation was quantified using velocity field measurements obtained from planar Time Resolved Digital Particle Image Velocimetry (TRDPIV). The starting vortex circulation was scaled using a varying orifice model and a pitching panel model. The varying orifice model which has been traditionally considered as the better representation of jellyfish propulsion did not appear to capture the scaling of the starting vortex. In contrast, the pitching panel representation appeared to better scale the governing flow physics and revealed a strong dependence on the flap kinematics and geometry. The results suggest that an alternative description should be considered for rowing jellyfish propulsion, using a pitching panel method instead of the traditional varying orifice model. Finally, the results show the importance of incorporating the entire bell geometry as a function of time in modeling rowing jellyfish propulsion.

Biomimetic autonomous robot inspired by the Cyanea capillata (Cyro)

A biomimetic robot inspired by Cyanea capillata, termed as 'Cyro', was developed to meet the functional demands of underwater surveillance in defense and civilian applications. The vehicle was designed to mimic the morphology and swimming mechanism of the natural counterpart. The body of the vehicle consists of a rigid support structure with linear DC motors which actuate eight mechanical arms. The mechanical arms in conjunction with artificial mesoglea create the hydrodynamic force required for propulsion. The full vehicle measures 170 cm in diameter and has a total mass of 76 kg. An analytical model of the mechanical arm kinematics was developed. The analytical and experimental bell kinematics were analyzed and compared to the C. capillata. Cyro was found to reach the water surface untethered and autonomously from a depth of 182 cm in five actuation cycles. It achieved an average velocity of 8.47 cm s(-1) while consuming an average power of 70 W. A two-axis thrust stand was developed to calculate the thrust directly from a single bell segment yielding an average thrust of 27.9 N for the whole vehicle. Steady state velocity during Cyro's swimming test was not reached but the measured performance during its last swim cycle resulted in a cost of transport of 10.9 J (kg ⋅ m)(-1) and total efficiency of 0.03.

Passive energy recapture in jellyfish contributes to propulsive advantage over other metazoans

Gelatinous zooplankton populations are well known for their ability to take over perturbed ecosystems. The ability of these animals to outcompete and functionally replace fish that exhibit an effective visual predatory mode is counterintuitive because jellyfish are described as inefficient swimmers that must rely on direct contact with prey to feed. We show that jellyfish exhibit a unique mechanism of passive energy recapture, which is exploited to allow them to travel 30% further each swimming cycle, thereby reducing metabolic energy demand by swimming muscles. By accounting for large interspecific differences in net metabolic rates, we demonstrate, contrary to prevailing views, that the jellyfish (Aurelia aurita) is one of the most energetically efficient propulsors on the planet, exhibiting a cost of transport (joules per kilogram per meter) lower than other metazoans. We estimate that reduced metabolic demand by passive energy recapture improves the cost of transport by 48%, allowing jellyfish to achieve the large sizes required for sufficient prey encounters. Pressure calculations, using both computational fluid dynamics and a newly developed method from empirical velocity field measurements, demonstrate that this extra thrust results from positive pressure created by a vortex ring underneath the bell during the refilling phase of swimming. These results demonstrate a physical basis for the ecological success of medusan swimmers despite their simple body plan. Results from this study also have implications for bioinspired design, where low-energy propulsion is required.

Fluid interactions that enable stealth predation by the upstream-foraging hydromedusa Craspedacusta sowerbyi

Unlike most medusae that forage with tentacles trailing behind their bells, several species forage upstream of their bells using aborally located tentacles. It has been hypothesized that these medusae forage as stealth predators by placing their tentacles in more quiescent regions of flow around their bells. Consequently, they are able to capture highly mobile, sensitive prey. We used digital particle image velocimetry (DPIV) to quantitatively characterize the flow field around Craspedacusta sowerbyi, a freshwater upstream-foraging hydromedusa, to evaluate the mechanics of its stealth predation. We found that fluid velocities were minimal in front and along the sides of the bell where the tentacles are located. As a result, the deformation rates in the regions where the tentacles are located were low, below the threshold rates required to elicit an escape response in several species of copepods. Estimates of their encounter volume rates were examined on the basis of flow past the tentacles, and trade-offs associated with tentacle characteristics were evaluated.

Propulsion in cubomedusae: mechanisms and utility

Evolutionary constraints which limit the forces produced during bell contractions of medusae affect the overall medusan morphospace such that jet propulsion is limited to only small medusae. Cubomedusae, which often possess large prolate bells and are thought to swim via jet propulsion, appear to violate the theoretical constraints which determine the medusan morphospace. To examine propulsion by cubomedusae, we quantified size related changes in wake dynamics, bell shape, swimming and turning kinematics of two species of cubomedusae, Chironex fleckeri and Chiropsella bronzie. During growth, these cubomedusae transitioned from using jet propulsion at smaller sizes to a rowing-jetting hybrid mode of propulsion at larger sizes. Simple modifications in the flexibility and kinematics of their velarium appeared to be sufficient to alter their propulsive mode. Turning occurs during both bell contraction and expansion and is achieved by generating asymmetric vortex structures during both stages of the swimming cycle. Swimming characteristics were considered in conjunction with the unique foraging strategy used by cubomedusae.

An algorithm to estimate unsteady and quasi-steady pressure fields from velocity field measurements

We describe and characterize a method for estimating the pressure field corresponding to velocity field measurements, such as those obtained by using particle image velocimetry. The pressure gradient is estimated from a time series of velocity fields for unsteady calculations or from a single velocity field for quasi-steady calculations. The corresponding pressure field is determined based on median polling of several integration paths through the pressure gradient field in order to reduce the effect of measurement errors that accumulate along individual integration paths. Integration paths are restricted to the nodes of the measured velocity field, thereby eliminating the need for measurement interpolation during this step and significantly reducing the computational cost of the algorithm relative to previous approaches. The method is validated by using numerically-simulated flow past a stationary, two-dimensional bluff body and a computational model of a three-dimensional, self-propelled anguilliform swimmer to study the effects of spatial and temporal resolution, domain size, signal-to-noise ratio, and out of plane effects. Particle image velocimetry measurements of a freely-swimming jellyfish medusa and a freely-swimming lamprey are analyzed using the method to demonstrate the efficacy of the approach when applied to empirical data.

Biomimetic and live medusae reveal the mechanistic advantages of a flexible bell margin

Flexible bell margins are characteristic components of rowing medusan morphologies and are expected to contribute towards their high propulsive efficiency. However, the mechanistic basis of thrust augmentation by flexible propulsors remained unresolved, so the impact of bell margin flexibility on medusan swimming has also remained unresolved. We used biomimetic robotic jellyfish vehicles to elucidate that propulsive thrust enhancement by flexible medusan bell margins relies upon fluid dynamic interactions between entrained flows at the inflexion point of the exumbrella and flows expelled from under the bell. Coalescence of flows from these two regions resulted in enhanced fluid circulation and, therefore, thrust augmentation for flexible margins of both medusan vehicles and living medusae. Using particle image velocimetry (PIV) data we estimated pressure fields to demonstrate a mechanistic basis of enhanced flows associated with the flexible bell margin. Performance of vehicles with flexible margins was further enhanced by vortex interactions that occur during bell expansion. Hydrodynamic and performance similarities between robotic vehicles and live animals demonstrated that the propulsive advantages of flexible margins found in nature can be emulated by human-engineered propulsors. Although medusae are simple animal models for description of this process, these results may contribute towards understanding the performance of flexible margins among other animal lineages.

Flow structure and transport characteristics of feeding and exchange currents generated by upside-down Cassiopea jellyfish

Quantifying the flows generated by the pulsations of jellyfish bells is crucial for understanding the mechanics and efficiency of their swimming and feeding. Recent experimental and theoretical work has focused on the dynamics of vortices in the wakes of swimming jellyfish with relatively simple oral arms and tentacles. The significance of bell pulsations for generating feeding currents through elaborate oral arms and the consequences for particle capture are not as well understood. To isolate the generation of feeding currents from swimming, the pulsing kinematics and fluid flow around the benthic jellyfish Cassiopea spp. were investigated using a combination of videography, digital particle image velocimetry and direct numerical simulation. During the rapid contraction phase of the bell, fluid is pulled into a starting vortex ring that translates through the oral arms with peak velocities that can be of the order of 10 cm s(-1). Strong shear flows are also generated across the top of the oral arms throughout the entire pulse cycle. A coherent train of vortex rings is not observed, unlike in the case of swimming oblate medusae such as Aurelia aurita. The phase-averaged flow generated by bell pulsations is similar to a vertical jet, with induced flow velocities averaged over the cycle of the order of 1-10 mm s(-1). This introduces a strong near-horizontal entrainment of the fluid along the substrate and towards the oral arms. Continual flow along the substrate towards the jellyfish is reproduced by numerical simulations that model the oral arms as a porous Brinkman layer of finite thickness. This two-dimensional numerical model does not, however, capture the far-field flow above the medusa, suggesting that either the three-dimensionality or the complex structure of the oral arms helps to direct flow towards the central axis and up and away from the animal.

Effect of vehicle configuration on the performance of a submersible pulsed-jet vehicle at intermediate Reynolds number

Recent results have demonstrated that pulsed-jet propulsion can achieve propulsive efficiency greater than that for steady jets when short, high frequency pulses are used, and the pulsed-jet advantage increases as Reynolds number decreases into the intermediate range (∼50). An important aspect of propulsive performance, however, is the vehicle configuration. The nozzle configuration influences the jet speed and, in the case of pulsed-jets, the formation of the vortex rings with each jet pulse, which have important effects on thrust. Likewise, the hull configuration influences the vehicle speed through its effect on drag. To investigate these effects, several flow inlet, nozzle, and hull tail configurations were tested on a submersible, self-propelled pulsed-jet vehicle ('Robosquid' for short) for jet pulse length-to-diameter ratios (L/D) in the range 0.5-6 and pulsing duty cycles (St(L)) of 0.2 and 0.5. For the configurations tested, the vehicle Reynolds number (Re(υ)) ranged from 25 to 110. In terms of propulsive efficiency, changing between forward and aft-facing inlets had little effect for the conditions considered, but changing from a smoothly tapered aft hull section to a blunt tail increased propulsive efficiency slightly due to reduced drag for the blunt tail at intermediate Re(υ). Sharp edged orifices also showed increased vehicle velocity and propulsive efficiency in comparison to smooth nozzles, which was associated with stronger vortex rings being produced by the flow contraction through the orifice. Larger diameter orifices showed additional gains in propulsive efficiency over smaller orifices if the rate of mass flow was matched with the smaller diameter cases, but using the same maximum jet velocity with the larger diameter decreased the propulsive efficiency relative to the smaller diameter cases.

Effects of shape and stroke parameters on the propulsion performance of an axisymmetric swimmer

In nature, there exists a special group of aquatic animals which have an axisymmetric body and whose primary swimming mechanism is to use periodic body contractions to generate vortex rings in the surrounding fluid. Using jellyfish medusae as an example, this study develops a mathematical model of body kinematics of an axisymmetric swimmer and uses a computational approach to investigate the induced vortex wakes. Wake characteristics are identified for swimmers using jet propulsion and rowing, two mechanisms identified in previous studies of medusan propulsion. The parameter space of body kinematics is explored through four quantities: a measure of body shape, stroke amplitude, the ratio between body contraction duration and extension duration, and the pulsing frequency. The effects of these parameters on thrust, input power requirement and circulation production are quantified. Two metrics, cruising speed and energy cost of locomotion, are used to evaluate the propulsion performance. The study finds that a more prolate-shaped swimmer with larger stroke amplitudes is able to swim faster, but its cost of locomotion is also higher. In contrast, a more oblate-shaped swimmer with smaller stroke amplitudes uses less energy for its locomotion, but swims more slowly. Compared with symmetric strokes with equal durations of contraction and extension, faster bell contractions increase the swimming speed whereas faster bell extensions decrease it, but both require a larger energy input. This study shows that besides the well-studied correlations between medusan body shape and locomotion, stroke variables also affect the propulsion performance. It provides a framework for comparing the propulsion performance of axisymmetric swimmers based on their body kinematics when it is difficult to measure and analyze their wakes empirically. The knowledge from this study is also useful for the design of robotic swimmers that use axisymmetric body contractions for propulsion.

Faking giants: the evolution of high prey clearance rates in jellyfishes

Jellyfishes have functionally replaced several overexploited commercial stocks of planktivorous fishes. This is paradoxical, because they use a primitive prey capture mechanism requiring direct contact with the prey, whereas fishes use more efficient visual detection. We have compiled published data to show that, in spite of their primitive life-style, jellyfishes exhibit similar instantaneous prey clearance and respiration rates as their fish competitors and similar potential for growth and reproduction. To achieve this production, they have evolved large, water-laden bodies that increase prey contact rates. Although larger bodies are less efficient for swimming, optimization analysis reveals that large collectors are advantageous if they move through the water sufficiently slowly.

A biomimetic robotic jellyfish (Robojelly) actuated by shape memory alloy composite actuators

An analysis is conducted on the design, fabrication and performance of an underwater vehicle mimicking the propulsion mechanism and physical appearance of a medusa (jellyfish). The robotic jellyfish called Robojelly mimics the morphology and kinematics of the Aurelia aurita species. Robojelly actuates using bio-inspired shape memory alloy composite actuators. A systematic fabrication technique was developed to replicate the essential structural features of A. aurita. Robojelly's body was fabricated from RTV silicone having a total mass of 242 g and bell diameter of 164 mm. Robojelly was able to generate enough thrust in static water conditions to propel itself and achieve a proficiency of 0.19 s(-1) while the A. aurita achieves a proficiency of around 0.25 s(-1). A thrust analysis based on empirical measurements for a natural jellyfish was used to compare the performance of the different robotic configurations. The configuration with best performance was a Robojelly with segmented bell and a passive flap structure. Robojelly was found to consume an average power on the order of 17 W with the actuators not having fully reached a thermal steady state.

A numerical study of the effects of bell pulsation dynamics and oral arms on the exchange currents generated by the upside-down jellyfish Cassiopea xamachana

Mathematical and experimental studies of the flows generated by jellyfish have focused primarily on mechanisms of swimming. More recent work has also considered the fluid dynamics of feeding from currents generated during swimming. Here we capitalize on the benthic lifestyle of the upside-down jellyfish (Cassiopea xamachana) to explore the fluid dynamics of feeding uncoupled from swimming. A two-dimensional mathematical model is developed to capture the fundamental characteristics of the motion of the unique concave bell shape. Given the prominence of the oral arms, this structure is included and modeled as a porous layer that perturbs the flow generated by bell contractions. The immersed boundary method is used to solve the fluid–structure interaction problem. Velocity fields obtained from live organisms using digital particle image velocimetry were used to validate the numerical simulations. Parameter sweeps were used to numerically explore the effects of changes in pulse dynamics and the properties of the oral arms independently. Numerical experiments allow the opportunity to examine physical effects and limits within and beyond the biologically relevant range to develop a better understanding of the system. The presence of the prominent oral arm structures in the field of flow increased the flux of new fluid from along the substrate to the bell. The numerical simulations also showed that the presence of pauses between bell expansion and the next contraction alters the flow of the fluid over the bell and through the oral arms.

Ontogenetic changes in the bell morphology and kinematics and swimming behavior of rowing medusae: the special case of the limnomedusa Liriope tetraphylla

Swimming animals may experience significant changes in the Reynolds number (Re) of their surrounding fluid flows throughout ontogeny. Many medusae experience Re environments with significant viscous forces as small juveniles but inertially dominated Re environments as adults. These different environments may affect their propulsive strategies. In particular, rowing, a propulsive strategy with ecological advantages for large adults, may be constrained by viscosity for small juvenile medusae. We examined changes in the bell morphology and swimming kinematics of the limnomedusa Liriope tetraphylla at different stages of development. L. tetraphylla maintained an oblate bell (fineness ratio ≈ 0.5-0.6), large velar aperture ratio (R(v) ≈ 0.5-0.8), and rapid bell kinematics throughout development. These traits enabled it to use rowing propulsion at all stages except the very smallest sizes observed (diameter = 0.14 cm). During the juvenile stage, very rapid bell kinematics served to increase Re sufficiently for rowing propulsion. Other taxa that use rowing propulsion as adults, such as leptomedusae and scyphomedusae, typically utilize different propulsive strategies as small juveniles to function in low Re environments. We compared the performance values of the different propulsive modes observed among juvenile medusae.

Flow structures and fluid transport for the hydromedusae Sarsia tubulosa and Aequorea victoria

The flow structures produced by the hydromedusae Sarsia tubulosaand Aequorea victoria are examined using direct numerical simulation and Lagrangian coherent structures (LCS). Body motion of each hydromedusa is digitized and input to a CFD program. Sarsia tubulosa uses a jetting type of propulsion, emitting a single, strong, fast-moving vortex ring during each swimming cycle while a secondary vortex of opposite rotation remains trapped within the subumbrellar region. The ejected vortex is highly energetic and moves away from the hydromedusa very rapidly. Conversely, A. victoria, a paddling type hydromedusa, is found to draw fluid from the upper bell surface and eject this fluid in pairs of counter-rotating,slow-moving vortices near the bell margins. Unlike S. tubulosa, both vortices are ejected during the swimming cycle of A. victoria and linger in the tentacle region. In fact, we find that A. victoria and S. tubulosa swim with Strouhal numbers of 1.1 and 0.1, respectively. This means that vortices produced by A. victoria remain in the tentacle region roughly 10 times as long as those produced by S. tubulosa, which presents an excellent feeding opportunity during swimming for A. victoria. Finally, we examine the pressure on the interior bell surface of both hydromedusae and the velocity profile in the wake. We find that S. tubulosa produces very uniform pressure on the interior of the bell as well as a very uniform jet velocity across the velar opening. This type of swimming can be well approximated by a slug model, but A. victoria creates more complicated pressure and velocity profiles. We are also able to estimate the power output of S. tubulosa and find good agreement with other hydromedusan power outputs. All results are based on numerical simulations of the swimming jellyfish.