Attenuation coefficient estimation in Fourier-domain OCT of multi-layered phantoms

Tissue characterization using axicon probe-assisted common-path optical coherence tomography

In this work, a common-path optical coherence tomography (OCT) system is demonstrated for characterizing the tissue in terms of some optical properties. A negative axicon structure chemically etched inside the fiber tip is employed as optical probe in the OCT. This probe generates a quality Bessel beam owning a large depth-of-field, ∼700 µm and small central spot size, ∼3 µm. The OCT system is probing the sample without using any microscopic lens. For experimental validation, the OCT imaging of chicken tissue has been obtained along with estimation of its refractive index and optical attenuation coefficient. Afterwards, the cancerous tissue is differentiated from the normal tissue based on the OCT imaging, refractive index, and optical attenuation coefficient. The respective tissue samples are collected from the human liver and pancreas. This probe could be a useful tool for endoscopic or minimal-invasive inspection of malignancy inside the tissue either at early-stage or during surgery.

Measuring optical properties of clear and turbid media with broadband spectral interferometry

The group index, n g, group velocity dispersion (GVD), and scattering attenuation coefficient, μ s, were measured for dilutions of glycerol, ethanol, and Intralipid 20% with water. Experiments were performed with a supercontinuum laser based Mach-Zehnder spectroscopic interferometry setup for wavelengths between 400 and 930 nm. All optical properties could be retrieved from a single calibrated measurement of the interference spectrum. Scattering attenuation was determined from the envelope of the interference. The group index and GVD were retrieved from the unwrapped spectral phase. It was found that the group indices of glycerol and ethanol dilutions are in accordance with the Lorentz-Lorenz mixing formula. The scattering attenuation matches well to a semi-empirical model based on the Twerksy effective packing fraction.

Automated segmentation and quantification of calcified drusen in 3D swept source OCT imaging

Qualitative and quantitative assessments of calcified drusen are clinically important for determining the risk of disease progression in age-related macular degeneration (AMD). This paper reports the development of an automated algorithm to segment and quantify calcified drusen on swept-source optical coherence tomography (SS-OCT) images. The algorithm leverages the higher scattering property of calcified drusen compared with soft drusen. Calcified drusen have a higher optical attenuation coefficient (OAC), which results in a choroidal hypotransmission defect (hypoTD) below the calcified drusen. We show that it is possible to automatically segment calcified drusen from 3D SS-OCT scans by combining the OAC within drusen and the hypoTDs under drusen. We also propose a correction method for the segmentation of the retina pigment epithelium (RPE) overlying calcified drusen by automatically correcting the RPE by an amount of the OAC peak width along each A-line, leading to more accurate segmentation and quantification of drusen in general, and the calcified drusen in particular. A total of 29 eyes with nonexudative AMD and calcified drusen imaged with SS-OCT using the 6 × 6 mm² scanning pattern were used in this study to test the performance of the proposed automated method. We demonstrated that the method achieved good agreement with the human expert graders in identifying the area of calcified drusen (Dice similarity coefficient: 68.27 ± 11.09%, correlation coefficient of the area measurements: r = 0.9422, the mean bias of the area measurements = 0.04781 mm²).

Integrating a pressure sensor with an OCT handheld probe to facilitate imaging of microvascular information in skin tissue beds

Optical coherence tomography (OCT) and OCT angiography (OCTA) have been increasingly applied in skin imaging applications in dermatology, where the imaging is often performed with the OCT probe in contact with the skin surface. However, this contact mode imaging can introduce uncontrollable mechanical stress applied to the skin, inevitably complicating the interpretation of OCT/OCTA imaging results. There remains a need for a strategy for assessing local pressure applied on the skin during imaging acquisition. This study reports a handheld scanning probe integrated with built-in pressure sensors, allowing the operator to control the mechanical stress applied to the skin in real-time. With real time feedback information, the operator can easily determine whether the pressure applied to the skin would affect the imaging quality so as to obtain repeatable and reliable OCTA images for a more accurate investigation of skin conditions. Using this probe, imaging of palm skin was used in this study to demonstrate how the OCTA imaging would have been affected by different mechanical pressures ranging from 0 to 69 kPa. The results showed that OCTA imaging is relatively stable when the pressure is less than 11 kPa, and within this range, the change of vascular area density calculated from the OCTA imaging is below 0.13%. In addition, the probe was used to augment the OCT monitoring of blood flow changes during a reactive hyperemia experiment, in which the operator could properly control the amount of pressure applied to the skin surface and achieve full release after compression stimulation.

Depth-resolved visualization and automated quantification of hyperreflective foci on OCT scans using optical attenuation coefficients

An automated depth-resolved algorithm using optical attenuation coefficients (OACs) was developed to visualize, localize, and quantify hyperreflective foci (HRF) seen on OCT imaging that are associated with macular hyperpigmentation and represent an increased risk of disease progression in age related macular degeneration. To achieve this, we first transformed the OCT scans to linear representation, which were then contrasted by OACs. HRF were visualized and localized within the entire scan by differentiating HRF within the retina from HRF along the retinal pigment epithelium (RPE). The total pigment burden was quantified using the en face sum projection of an OAC slab between the inner limiting membrane (ILM) to Bruch's membrane (BM). The manual total pigment burden measurements were also obtained by combining manual outlines of HRF in the B-scans with the total area of hypotransmission defects outlined on sub-RPE slabs, which was used as the reference to compare with those obtained from the automated algorithm. 6×6 mm swept-source OCT scans were collected from a total of 49 eyes from 42 patients with macular HRF. We demonstrate that the algorithm was able to automatically distinguish between HRF within the retina and HRF along the RPE. In 24 test eyes, the total pigment burden measurements by the automated algorithm were compared with measurements obtained from manual segmentations. A significant correlation was found between the total pigment area measurements from the automated and manual segmentations (P < 0.001). The proposed automated algorithm based on OACs should be useful in studying eye diseases involving HRF.