1
|
Zhu H, Chen Z, Dai R, Yang B, Zhong M, Xiao S, He J. Broad -band nonlinear optical response in Bi 2Te 0.6S 2.4 alloys based on alloy engineering. NANOSCALE 2024; 16:11716-11723. [PMID: 38864172 DOI: 10.1039/d4nr01518e] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2024]
Abstract
Alloy engineering plays an important role in regulating the optoelectronic properties of materials. This work demonstrates that Bi2Te0.6S2.4 alloys can extend nonlinear optical response to the near-infrared range. Te alloying at S sites can narrow the band gap, as proved by density functional theory (DFT) calculations, leading to a broadband saturable absorption response ranging from ultraviolet (350 nm) to near-infrared (1100 nm) wavelength with negative nonlinear optical absorption coefficient ranging from -0.12 cm GW-1 to -1.28 cm GW-1. Moreover, the broadband carrier dynamic of Bi2Te0.6S2.4 alloys was investigated via femtosecond transient absorption (TA) at an excitation of 325 nm. A faster carrier dynamic at near-infrared wavelength was observed because of an increase in electron density at the conduction band minimum due to the additional Bi-Te interaction, which was corroborated by DFT calculations. These results suggest that alloy engineering provides an effective way for the development of broadband nonlinear optical devices.
Collapse
Affiliation(s)
- Haixia Zhu
- Hunan Key Laboratory of Nanophotonics and Devices, School of Physics, Central South University, Changsha 410083, China.
| | - Zhaozhe Chen
- Hunan Key Laboratory of Nanophotonics and Devices, School of Physics, Central South University, Changsha 410083, China.
| | - Rui Dai
- Hunan Key Laboratory of Nanophotonics and Devices, School of Physics, Central South University, Changsha 410083, China.
| | - Bojun Yang
- Hunan Key Laboratory of Nanophotonics and Devices, School of Physics, Central South University, Changsha 410083, China.
| | - Mianzeng Zhong
- Hunan Key Laboratory of Nanophotonics and Devices, School of Physics, Central South University, Changsha 410083, China.
| | - Si Xiao
- Hunan Key Laboratory of Nanophotonics and Devices, School of Physics, Central South University, Changsha 410083, China.
| | - Jun He
- Hunan Key Laboratory of Nanophotonics and Devices, School of Physics, Central South University, Changsha 410083, China.
| |
Collapse
|
2
|
Zhang C, Zhang C, Li Y, Shi Y, Chao J, Zhao Y, Yang H, Fu B. Wavelength-tunable broadband lasers based on nanomaterials. NANOTECHNOLOGY 2023; 34:492001. [PMID: 37666227 DOI: 10.1088/1361-6528/acf66d] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/05/2023] [Accepted: 09/03/2023] [Indexed: 09/06/2023]
Abstract
Nanomaterials are widely used in the fields of sensors, optoelectronics, biophotonics and ultrafast photonics due to their excellent mechanical, thermal, optical, electrical and magnetic properties. Particularly, owing to their nonlinear optical properties, fast response time and broadband operation, nanomaterials are ideal saturable absorption materials in ultrafast photonics, which contribute to the improvement of laser performance. Therefore, nanomaterials are of great importance to applications in wavelength-tunable broadband pulsed lasers. Herein, we review the integration and applications of nanomaterials in wavelength-tunable broadband ultrafast photonics. Firstly, the two integration methods, which are direct coupling and evanescent field coupling, and their characteristics are introduced. Secondly, the applications of nanomaterials in wavelength-tunable broadband lasers are summarized. Finally, the development of nanomaterials and broadband tunable lasers is reviewed and discussed.
Collapse
Affiliation(s)
- Chenxi Zhang
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, People's Republic of China
| | - Congyu Zhang
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, People's Republic of China
| | - Yiwei Li
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, People's Republic of China
| | - Yaran Shi
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, People's Republic of China
| | - Jiale Chao
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, People's Republic of China
| | - Yifan Zhao
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, People's Republic of China
| | - He Yang
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, People's Republic of China
| | - Bo Fu
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, People's Republic of China
- Key Laboratory of Big Data-Based Precision Medicine Ministry of Industry and Information Technology, School of Engineering Medicine, Beihang University, Beijing 100191, People's Republic of China
| |
Collapse
|
3
|
Tang S, Sheng Q, Wang Y, Chen S, Ye F, Yang F, Sun S, Sui Z, Bai C, Lu C, Fu S, Zhang H, Zhang W, Wang G. Generation of bright-dark solitons in an Er-doped fiber laser employing InSb as a saturable absorber. APPLIED OPTICS 2023; 62:1921-1926. [PMID: 37133075 DOI: 10.1364/ao.478859] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
In this paper, an indium antimonide (InSb) saturable absorber (SA) was successfully fabricated. The saturable absorption properties of the InSb SA were studied, and they show a modulation depth and a saturable intensity of 5.17% and 9.23M W/c m 2, respectively. By employing the InSb SA and building the ring cavity laser structure, the bright-dark soliton operations were successfully obtained by increasing the pump power to 100.4 mW and adjusting the polarization controller. As the pump power increased from 100.4 to 180.3 mW, the average output power increased from 4.69 to 9.42 mW, the corresponding fundamental repetition rate was 2.85 MHz, and the signal-to-noise ratio was 68 dB. The experimental results show that InSb with excellent saturable absorption characteristics can be used as a SA to obtain pulse lasers. Therefore, InSb has important potential in fiber laser generation, further applications in optoelectronics, laser distance ranging, and optical fiber communication, and it can be widely developed.
Collapse
|
4
|
Lu Y, Zhou Z, Kan X, Yang Z, Deng H, Liu B, Wang T, Liu F, Liu X, Zhu S, Yu Q, Wu J. Quasi-2D Mn 3Si 2Te 6 Nanosheet for Ultrafast Photonics. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:602. [PMID: 36770563 PMCID: PMC9920741 DOI: 10.3390/nano13030602] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/30/2022] [Revised: 01/19/2023] [Accepted: 01/28/2023] [Indexed: 06/18/2023]
Abstract
The magnetic nanomaterial Mn3Si2Te6 is a promising option for spin-dependent electronic and magneto-optoelectronic devices. However, its application in nonlinear optics remains fanciful. Here, we demonstrate a pulsed Er-doped fiber laser (EDFL) based on a novel quasi-2D Mn3Si2Te6 saturable absorber (SA) with low pump power at 1.5 μm. The high-quality Mn3Si2Te6 crystals were synthesized by the self-flux method, and the ultrathin Mn3Si2Te6 nanoflakes were prepared by a simple mechanical exfoliation procedure. To the best of our knowledge, this is the first time laser pulses have been generated using quasi-2D Mn3Si2Te6. A stable pulsed laser at 1562 nm with a low threshold pump power of 60 mW was produced by integrating the Mn3Si2Te6 SA into an EDFL cavity. The maximum power of the output pulse is 783 μW. The repetition rate can vary from 24.16 to 44.44 kHz, with corresponding pulse durations of 5.64 to 3.41 µs. Our results indicate that the quasi-2D Mn3Si2Te6 is a promising material for application in ultrafast photonics.
Collapse
Affiliation(s)
- Yan Lu
- School of Transportation Engineering, Jiangsu Shipping College, Nantong 226010, China
| | - Zheng Zhou
- CAS Key Laboratory of Nanophotonic Materials and Devices & Key Laboratory of Nanodevices and Applications, i-Lab, Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences, Suzhou 215123, China
| | - Xuefen Kan
- School of Transportation Engineering, Jiangsu Shipping College, Nantong 226010, China
| | - Zixin Yang
- College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410073, China
| | - Haiqin Deng
- College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410073, China
| | - Bin Liu
- College of Science and Key Laboratory for Ferrous Metallurgy, Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081, China
| | - Tongtong Wang
- College of Science and Key Laboratory for Ferrous Metallurgy, Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081, China
| | - Fangqi Liu
- College of Science and Key Laboratory for Ferrous Metallurgy, Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081, China
| | - Xueyu Liu
- School of Transportation Engineering, Jiangsu Shipping College, Nantong 226010, China
| | - Sicong Zhu
- College of Science and Key Laboratory for Ferrous Metallurgy, Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081, China
| | - Qiang Yu
- CAS Key Laboratory of Nanophotonic Materials and Devices & Key Laboratory of Nanodevices and Applications, i-Lab, Suzhou Institute of Nano-Tech and Nano-Bionics (SINANO), Chinese Academy of Sciences, Suzhou 215123, China
- College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410073, China
| | - Jian Wu
- College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410073, China
| |
Collapse
|
5
|
Zhou W, Pang X, Zhang H, Yu Q, Liu F, Wang W, Zhao Y, Lu Y, Yang Z. Frontier and Hot Topics of Pulsed Fiber Lasers via CiteSpace Scientometric Analysis: Passively Mode-Locked Fiber Lasers with Real Saturable Absorbers Based on Two-Dimensional Materials. MATERIALS (BASEL, SWITZERLAND) 2022; 15:6761. [PMID: 36234100 PMCID: PMC9572618 DOI: 10.3390/ma15196761] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/15/2022] [Revised: 09/23/2022] [Accepted: 09/26/2022] [Indexed: 06/16/2023]
Abstract
Pulsed fiber lasers, with high peak power and narrow pulse widths, have been proven to be an important tool for a variety of fields of application. In this work, frontier and hot topics in pulsed fiber lasers were analyzed with 11,064 articles. Benefitting from the scientometric analysis capabilities of CiteSpace, the analysis found that passively mode-locked fiber lasers with saturable absorbers (SAs) based on two-dimensional (2D) materials have become a hot research topic in the field of pulsed fiber lasers due to the advantages of self-starting operation, high stability, and good compatibility. The excellent nonlinear optical properties exhibited by 2D materials at nanometer-scale thicknesses have become a particularly popular research topic; the research has paved the way for exploring its wider applications. We summarize the performance of several typical 2D materials in ultrafast fiber lasers, such as graphene, topological insulators (TIs), transition metal dichalcogenides (TMDs), and black phosphorus (BP). Meanwhile, we review and analyze the direction of the development of 2D SAs for ultrafast fiber lasers.
Collapse
Affiliation(s)
- Wen Zhou
- College of Systems Engineering, National University of Defense Technology, Changsha 410073, China
| | - Xiuyang Pang
- College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410073, China
| | - Hanke Zhang
- College of Meteorology and Oceanography, National University of Defense Technology, Changsha 410073, China
| | - Qiang Yu
- College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410073, China
| | - Fangqi Liu
- College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410073, China
- Hubei Province Key Laboratory of Systems Science in Metallurgical Process, The State Key Laboratory for Refractories and Metallurgy, College of Science, Wuhan University of Science and Technology, Wuhan 430081, China
| | - Wenyue Wang
- Jiangxi Key Laboratory of Photoelectronics and Telecommunication, College of Physics and Communication Electronics, Jiangxi Normal University, Nanchang 330022, China
| | - Yikun Zhao
- College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410073, China
| | - Yan Lu
- School of Transportation Engineering, Jiangsu Shipping College, Nantong 226010, China
| | - Zixin Yang
- College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410073, China
| |
Collapse
|
6
|
Cao R, Fan S, Yin P, Ma C, Zeng Y, Wang H, Khan K, Wageh S, Al-Ghamd AA, Tareen AK, Al-Sehemi AG, Shi Z, Xiao J, Zhang H. Mid-Infrared Optoelectronic Devices Based on Two-Dimensional Materials beyond Graphene: Status and Trends. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:2260. [PMID: 35808105 PMCID: PMC9268368 DOI: 10.3390/nano12132260] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/07/2022] [Revised: 06/22/2022] [Accepted: 06/23/2022] [Indexed: 01/27/2023]
Abstract
Since atomically thin two-dimensional (2D) graphene was successfully synthesized in 2004, it has garnered considerable interest due to its advanced properties. However, the weak optical absorption and zero bandgap strictly limit its further development in optoelectronic applications. In this regard, other 2D materials, including black phosphorus (BP), transition metal dichalcogenides (TMDCs), 2D Te nanoflakes, and so forth, possess advantage properties, such as tunable bandgap, high carrier mobility, ultra-broadband optical absorption, and response, enable 2D materials to hold great potential for next-generation optoelectronic devices, in particular, mid-infrared (MIR) band, which has attracted much attention due to its intensive applications, such as target acquisition, remote sensing, optical communication, and night vision. Motivated by this, this article will focus on the recent progress of semiconducting 2D materials in MIR optoelectronic devices that present a suitable category of 2D materials for light emission devices, modulators, and photodetectors in the MIR band. The challenges encountered and prospects are summarized at the end. We believe that milestone investigations of 2D materials beyond graphene-based MIR optoelectronic devices will emerge soon, and their positive contribution to the nano device commercialization is highly expected.
Collapse
Affiliation(s)
- Rui Cao
- Institute of Microscale Optoelectronics, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology, College of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen 518060, China; (R.C.); (S.F.); (Y.Z.); (H.W.); (K.K.); (H.Z.)
| | - Sidi Fan
- Institute of Microscale Optoelectronics, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology, College of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen 518060, China; (R.C.); (S.F.); (Y.Z.); (H.W.); (K.K.); (H.Z.)
| | - Peng Yin
- College of Photoelectrical Engineering, Changchun University of Science and Technology, Changchun 130022, China;
| | - Chunyang Ma
- Research Center of Circuits and Systems, Peng Cheng Laboratory (PCL), Shenzhen 518055, China;
| | - Yonghong Zeng
- Institute of Microscale Optoelectronics, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology, College of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen 518060, China; (R.C.); (S.F.); (Y.Z.); (H.W.); (K.K.); (H.Z.)
| | - Huide Wang
- Institute of Microscale Optoelectronics, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology, College of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen 518060, China; (R.C.); (S.F.); (Y.Z.); (H.W.); (K.K.); (H.Z.)
| | - Karim Khan
- Institute of Microscale Optoelectronics, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology, College of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen 518060, China; (R.C.); (S.F.); (Y.Z.); (H.W.); (K.K.); (H.Z.)
| | - Swelm Wageh
- Department of Physics, Faculty of Science, King Abdulaziz University, Jeddah 21589, Saudi Arabia; (S.W.); (A.A.A.-G.)
| | - Ahmed A. Al-Ghamd
- Department of Physics, Faculty of Science, King Abdulaziz University, Jeddah 21589, Saudi Arabia; (S.W.); (A.A.A.-G.)
| | - Ayesha Khan Tareen
- School of Mechanical Engineering, Dongguan University of Technology, Dongguan 523808, China;
| | - Abdullah G. Al-Sehemi
- Research Center for Advanced Materials Science (RCAMS), King Khalid University, Abha 61413, Saudi Arabia;
| | - Zhe Shi
- School of Physics & New Energy, Xuzhou University of Technology, Xuzhou 221018, China
| | - Jing Xiao
- College of Physics and Electronic Engineering, Taishan University, Tai’an 271000, China
| | - Han Zhang
- Institute of Microscale Optoelectronics, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology, College of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen 518060, China; (R.C.); (S.F.); (Y.Z.); (H.W.); (K.K.); (H.Z.)
| |
Collapse
|
7
|
Liu J, Chen S, He J, Huang R, Tao L, Zhao Y, Yang Y. Ti 3C 2T x MXene Quantum Dots with Surface-Terminated Groups (-F, -OH, =O, -Cl) for Ultrafast Photonics. NANOMATERIALS 2022; 12:nano12122043. [PMID: 35745383 PMCID: PMC9229704 DOI: 10.3390/nano12122043] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/09/2022] [Revised: 06/08/2022] [Accepted: 06/11/2022] [Indexed: 11/20/2022]
Abstract
Transition metal carbides and nitrides (MXenes) have attracted significant attention in photoelectric applications due to their highly tunable electronic and optical properties influenced by a flexible compositional or surface functional group regulation. Ti3C2Tx MXenes (-F, -OH, =O terminated) used in previous ultrafast photonic studies are usually synthesized via a generic hydrofluoric acid (HF) etching strategy, which may cause numerous defects and thus impedes the optoelectronic properties of Ti3C2Tx. In this contribution, inspired by a much higher conductivity and carrier mobility of Ti3C2Tx (-F, -OH, =O, -Cl terminated) prepared from a minimally intensive layer delamination method (MILD) etching strategy, we further optimized it with a liquid-phase exfoliation (LPE) method to synthesize pure Ti3C2Tx quantum dots (QDs) for ultrafast photonic. Compared to the other QDs saturable absorber (SA) devices performed at 1550 nm, our SA device exhibited a relatively low saturation intensity (1.983 GW/cm−2) and high modulation depth (11.6%), allowing for a more easily mode-locked pulse generation. A distinguished ultrashort pulse duration of 466 fs centered at the wavelength of 1566.57 nm with a fundamental frequency of 22.78 MHz was obtained in the communication band. Considering the SA based on such a Ti3C2Tx QDs tapered fiber is the first exploration of Er3+-doped fiber laser (EDFL), this work will open up a new avenue for applications in ultrafast photonics.
Collapse
Affiliation(s)
- Jianfeng Liu
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China; (J.L.); (J.H.); (R.H.); (L.T.); (Y.Z.); (Y.Y.)
| | - Shanshan Chen
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China; (J.L.); (J.H.); (R.H.); (L.T.); (Y.Z.); (Y.Y.)
- Guangdong Provincial Key Laboratory of Information Photonics Technology, Guangdong University of Technology, Guangzhou 510006, China
- Correspondence:
| | - Junshan He
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China; (J.L.); (J.H.); (R.H.); (L.T.); (Y.Z.); (Y.Y.)
| | - Runming Huang
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China; (J.L.); (J.H.); (R.H.); (L.T.); (Y.Z.); (Y.Y.)
| | - Lili Tao
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China; (J.L.); (J.H.); (R.H.); (L.T.); (Y.Z.); (Y.Y.)
- Guangdong Provincial Key Laboratory of Information Photonics Technology, Guangdong University of Technology, Guangzhou 510006, China
| | - Yu Zhao
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China; (J.L.); (J.H.); (R.H.); (L.T.); (Y.Z.); (Y.Y.)
- Guangdong Provincial Key Laboratory of Information Photonics Technology, Guangdong University of Technology, Guangzhou 510006, China
| | - Yibin Yang
- School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006, China; (J.L.); (J.H.); (R.H.); (L.T.); (Y.Z.); (Y.Y.)
- Guangdong Provincial Key Laboratory of Information Photonics Technology, Guangdong University of Technology, Guangzhou 510006, China
| |
Collapse
|
8
|
Zhang YN, Song ZY, Qiao D, Li XH, Guang Z, Li SP, Zhou LB, Chen XH. 2D van der Waals materials for ultrafast pulsed fiber lasers: review and prospect. NANOTECHNOLOGY 2021; 33:082003. [PMID: 34731847 DOI: 10.1088/1361-6528/ac3611] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/20/2021] [Accepted: 11/03/2021] [Indexed: 06/13/2023]
Abstract
2D van der Waals materials are crystals composed of atomic layers, which have atomic thickness scale layers and rich distinct properties, including ultrafast optical response, surface effects, light-mater interaction, small size effects, quantum effects and macro quantum tunnel effects. With the exploration of saturable absorption characteristic of 2D van der Waals materials, a series of potential applications of 2D van der Waals materials as high threshold, broadband and fast response saturable absorbers (SAs) in ultrafast photonics have been proposed and confirmed. Herein, the photoelectric characteristics, nonlinear characteristic measurement technique of 2D van der Waals materials and the preparation technology of SAs are systematically described. Furthermore, the ultrafast pulsed fiber lasers based on classical 2D van der Waals materials including graphene, transition metal chalcogenides, topological insulators and black phosphorus have been fully summarized and analyzed. On this basis, opportunities and directions in this field, as well as the research results of ultrafast pulsed fiber lasers based on the latest 2D van der Waals materials (such as PbO, FePSe3, graphdiyne, bismuthene, Ag2S and MXene etc), are reviewed and summarized.
Collapse
Affiliation(s)
- Ya-Ni Zhang
- Shaanxi University of Science & Technology, Department of Physics, Xi'an, Shaanxi, 710021, People's Republic of China
| | - Zhuo-Ying Song
- Shaanxi University of Science & Technology, Department of Physics, Xi'an, Shaanxi, 710021, People's Republic of China
| | - Dun Qiao
- University of South Wales, Wireless and Optoelectronics Research and Innovation Centre, Faculty of Computing, Engineering and Science, Pontypridd CF37 1DL, United Kingdom
| | - Xiao-Hui Li
- Shaanxi Normal University, College of Physics and Information Technology, Xi'an, Shaanxi, 710119, People's Republic of China
| | - Zhe Guang
- School of Physics, Georgia Institute of Technology, 837 State Street, Atlanta, GA 30332, United States of America
- School of Computer Science, Georgia Institute of Technology, 266 Ferst Drive, Atlanta, GA 30332, United States of America
| | - Shao-Peng Li
- Shaanxi University of Science & Technology, Department of Physics, Xi'an, Shaanxi, 710021, People's Republic of China
| | - Li-Bin Zhou
- Shaanxi University of Science & Technology, Department of Physics, Xi'an, Shaanxi, 710021, People's Republic of China
| | - Xiao-Han Chen
- Shandong University, School of Information Science and Engineering, Shandong Provincial Key Laboratory of Laser Technology and Application, Jinan, Shandong, 250100, People's Republic of China
| |
Collapse
|
9
|
Zhang Y, Ma C, Xie J, Ågren H, Zhang H. Black Phosphorus/Polymers: Status and Challenges. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2100113. [PMID: 34323318 DOI: 10.1002/adma.202100113] [Citation(s) in RCA: 31] [Impact Index Per Article: 10.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/06/2021] [Revised: 01/30/2021] [Indexed: 06/13/2023]
Abstract
As a newly emerged mono-elemental nanomaterial, black phosphorus (BP) has been widely investigated for its fascinating physical properties, including layer-dependent tunable band gap (0.3-1.5 eV), high ON/OFF ratio (104 ), high carrier mobility (103 cm2 V-1 s-1 ), excellent mechanical resistance, as well as special in-plane anisotropic optical, thermal, and vibrational characteristics. However, the instability caused by chemical degradation of its surface has posed a severe challenge for its further applications. A focused BP/polymer strategy has more recently been developed and implemented to hurdle this issue, so at present BP/polymers have been developed that exhibit enhanced stability, as well as outstanding optical, thermal, mechanical, and electrical properties. This has promoted researchers to further explore the potential applications of black phosphorous. In this review, the preparation processes and the key properties of BP/polymers are reviewed, followed by a detailed account of their diversified applications, including areas like optoelectronics, bio-medicine, and energy storage. Finally, in accordance with the current progress, the prospective challenges and future directions are highlighted and discussed.
Collapse
Affiliation(s)
- Ye Zhang
- Collaborative Innovation Center for Optoelectronic Science & Technology, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education, Institute of Microscale Optoelectronics, Shenzhen University, Shenzhen, 518060, China
- School of Chemistry and Chemical Engineering, University of South China, Hengyang, 421001, China
| | - Chunyang Ma
- Collaborative Innovation Center for Optoelectronic Science & Technology, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education, Institute of Microscale Optoelectronics, Shenzhen University, Shenzhen, 518060, China
| | - Jianlei Xie
- Collaborative Innovation Center for Optoelectronic Science & Technology, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education, Institute of Microscale Optoelectronics, Shenzhen University, Shenzhen, 518060, China
| | - Hans Ågren
- Department of Physics and Astronomy, Uppsala University, Box 516, Uppsala, SE-751 20, Sweden
| | - Han Zhang
- Collaborative Innovation Center for Optoelectronic Science & Technology, International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education, Institute of Microscale Optoelectronics, Shenzhen University, Shenzhen, 518060, China
| |
Collapse
|
10
|
Zhang A, Wang Z, Ouyang H, Lyu W, Sun J, Cheng Y, Fu B. Recent Progress of Two-Dimensional Materials for Ultrafast Photonics. NANOMATERIALS 2021; 11:nano11071778. [PMID: 34361163 PMCID: PMC8308201 DOI: 10.3390/nano11071778] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/22/2021] [Revised: 06/23/2021] [Accepted: 06/30/2021] [Indexed: 12/02/2022]
Abstract
Owing to their extraordinary physical and chemical properties, two-dimensional (2D) materials have aroused extensive attention and have been widely used in photonic and optoelectronic devices, catalytic reactions, and biomedicine. In particular, 2D materials possess a unique bandgap structure and nonlinear optical properties, which can be used as saturable absorbers in ultrafast lasers. Here, we mainly review the top-down and bottom-up methods for preparing 2D materials, such as graphene, topological insulators, transition metal dichalcogenides, black phosphorus, and MXenes. Then, we focus on the ultrafast applications of 2D materials at the typical operating wavelengths of 1, 1.5, 2, and 3 μm. The key parameters and output performance of ultrafast pulsed lasers based on 2D materials are discussed. Furthermore, an outlook regarding the fabrication methods and the development of 2D materials in ultrafast photonics is also presented.
Collapse
Affiliation(s)
- Aojie Zhang
- BUAA-CCMU Advanced Innovation Center for Big Data-Based Precision Medicine, School of Engineering Medicine, Beihang University, Beijing 100191, China; (A.Z.); (Z.W.); (H.O.); (W.L.); (J.S.); (Y.C.)
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, China
| | - Zihao Wang
- BUAA-CCMU Advanced Innovation Center for Big Data-Based Precision Medicine, School of Engineering Medicine, Beihang University, Beijing 100191, China; (A.Z.); (Z.W.); (H.O.); (W.L.); (J.S.); (Y.C.)
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, China
| | - Hao Ouyang
- BUAA-CCMU Advanced Innovation Center for Big Data-Based Precision Medicine, School of Engineering Medicine, Beihang University, Beijing 100191, China; (A.Z.); (Z.W.); (H.O.); (W.L.); (J.S.); (Y.C.)
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, China
| | - Wenhao Lyu
- BUAA-CCMU Advanced Innovation Center for Big Data-Based Precision Medicine, School of Engineering Medicine, Beihang University, Beijing 100191, China; (A.Z.); (Z.W.); (H.O.); (W.L.); (J.S.); (Y.C.)
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, China
| | - Jingxuan Sun
- BUAA-CCMU Advanced Innovation Center for Big Data-Based Precision Medicine, School of Engineering Medicine, Beihang University, Beijing 100191, China; (A.Z.); (Z.W.); (H.O.); (W.L.); (J.S.); (Y.C.)
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, China
| | - Yuan Cheng
- BUAA-CCMU Advanced Innovation Center for Big Data-Based Precision Medicine, School of Engineering Medicine, Beihang University, Beijing 100191, China; (A.Z.); (Z.W.); (H.O.); (W.L.); (J.S.); (Y.C.)
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, China
| | - Bo Fu
- BUAA-CCMU Advanced Innovation Center for Big Data-Based Precision Medicine, School of Engineering Medicine, Beihang University, Beijing 100191, China; (A.Z.); (Z.W.); (H.O.); (W.L.); (J.S.); (Y.C.)
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, China
- Key Laboratory of Big Data-Based Precision Medicine Ministry of Industry and Information Technology, Interdisciplinary Innovation Institute of Medicine and Engineering, Beihang University, Beijing 100191, China
- Correspondence:
| |
Collapse
|
11
|
Debnath PC, Yeom DI. Ultrafast Fiber Lasers with Low-Dimensional Saturable Absorbers: Status and Prospects. SENSORS 2021; 21:s21113676. [PMID: 34070539 PMCID: PMC8198619 DOI: 10.3390/s21113676] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/13/2021] [Revised: 05/14/2021] [Accepted: 05/16/2021] [Indexed: 12/22/2022]
Abstract
Wide-spectral saturable absorption (SA) in low-dimensional (LD) nanomaterials such as zero-, one-, and two-dimensional materials has been proven experimentally with outstanding results, including low saturation intensity, deep modulation depth, and fast carrier recovery time. LD nanomaterials can therefore be used as SAs for mode-locking or Q-switching to generate ultrafast fiber laser pulses with a high repetition rate and short duration in the visible, near-infrared, and mid-infrared wavelength regions. Here, we review the recent development of emerging LD nanomaterials as SAs for ultrafast mode-locked fiber laser applications in different dispersion regimes such as anomalous and normal dispersion regimes of the laser cavity operating in the near-infrared region, especially at ~1550 nm. The preparation methods, nonlinear optical properties of LD SAs, and various integration schemes for incorporating LD SAs into fiber laser systems are introduced. In addition to these, externally (electrically or optically) controlled pulsed fiber laser behavior and other characteristics of various LD SAs are summarized. Finally, the perspectives and challenges facing LD SA-based mode-locked ultrafast fiber lasers are highlighted.
Collapse
Affiliation(s)
- Pulak Chandra Debnath
- Department of Energy Systems Research, Ajou University, 206 Worldcup-ro, Yeongtong-gu, Suwon 16499, Korea;
- Department of Physics, Ajou University, 206 Worldcup-ro, Yeongtong-gu, Suwon 16499, Korea
| | - Dong-Il Yeom
- Department of Energy Systems Research, Ajou University, 206 Worldcup-ro, Yeongtong-gu, Suwon 16499, Korea;
- Department of Physics, Ajou University, 206 Worldcup-ro, Yeongtong-gu, Suwon 16499, Korea
- Correspondence: ; Tel.: +82-31-219-1937
| |
Collapse
|
12
|
Wang CC, Shieu FS, Shih HC. Photosensing and Characterizing of the Pristine and In-, Sn-Doped Bi 2Se 3 Nanoplatelets Fabricated by Thermal V-S Process. NANOMATERIALS 2021; 11:nano11051352. [PMID: 34065472 PMCID: PMC8161412 DOI: 10.3390/nano11051352] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/06/2021] [Revised: 05/17/2021] [Accepted: 05/18/2021] [Indexed: 12/02/2022]
Abstract
Pristine, and In-, Sn-, and (In, Sn)-doped Bi2Se3 nanoplatelets synthesized on Al2O3(100) substrate by a vapor–solid mechanism in thermal CVD process via at 600 °C under 2 × 10−2 Torr. XRD and HRTEM reveal that In or Sn dopants had no effect on the crystal structure of the synthesized rhombohedral-Bi2Se3. FPA–FTIR reveals that the optical bandgap of doped Bi2Se3 was 26.3%, 34.1%, and 43.7% lower than pristine Bi2Se3. XRD, FESEM–EDS, Raman spectroscopy, and XPS confirm defects (In3+Bi3+), (In3+V0), (Sn4+Bi3+), (V0Bi3+), and (Sn2+Bi3+). Photocurrent that was generated in (In,Sn)-doped Bi2Se3 under UV(8 W) and red (5 W) light revealed stable photocurrents of 5.20 × 10−10 and 0.35 × 10−10 A and high Iphoto/Idark ratios of 30.7 and 52.2. The rise and fall times of the photocurrent under UV light were 4.1 × 10−2 and 6.6 × 10−2 s. Under UV light, (In,Sn)-dopedBi2Se3 had 15.3% longer photocurrent decay time and 22.6% shorter rise time than pristine Bi2Se3, indicating that (In,Sn)-doped Bi2Se3 exhibited good surface conduction and greater photosensitivity. These results suggest that In, Sn, or both dopants enhance photodetection of pristine Bi2Se3 under UV and red light. The findings also suggest that type of defect is a more important factor than optical bandgap in determining photo-detection sensitivity. (In,Sn)-doped Bi2Se3 has greater potential than undoped Bi2Se3 for use in UV and red-light photodetectors.
Collapse
Affiliation(s)
- Chih-Chiang Wang
- Department of Materials Science and Engineering, National Chung Hsing University, Taichung 40227, Taiwan;
| | - Fuh-Sheng Shieu
- Department of Materials Science and Engineering, National Chung Hsing University, Taichung 40227, Taiwan;
- Correspondence: (F.-S.S.); (H.C.S.)
| | - Han C. Shih
- Department of Materials Science and Engineering, National Chung Hsing University, Taichung 40227, Taiwan;
- Department of Chemical Engineering and Materials Science, Chinese Culture University, Taipei 11114, Taiwan
- Correspondence: (F.-S.S.); (H.C.S.)
| |
Collapse
|
13
|
Shaodong H, Chengjin L, Haifeng L, Jinzhang W, Chunyu G, Jianqun C, Min Z, Peiguang Y. Ultrafast thulium-doped fiber laser mode-locked by antimonides. OPTICS EXPRESS 2021; 29:13722-13732. [PMID: 33985102 DOI: 10.1364/oe.421993] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/09/2021] [Accepted: 04/08/2021] [Indexed: 06/12/2023]
Abstract
We report, for the first time, the nonlinear absorption at the 2 µm waveband of three Sb-related materials including two Sb compounds, GaSb and InSb, and one Sb alloy, Ge8Sb92. These saturable absorbers (SAs) were coated on tapered single mode fibers by the magnetron-sputtering deposition method. By incorporating these SAs into Tm-doped fiber lasers, ultrafast mode-locked solitons could be readily obtained. Stable pulse trains with 922 fs/753 fs/1005 fs pulse durations, 31.35 mW/37.70 mW/16.60 mW output powers, 93 dB/80 dB/92 dB signal-to-noise ratios were achieved with GaSb/InSb/Ge8Sb92, respectively. Our findings demonstrate that these materials can be widely used for photonic devices in the 2 µm waveband where ultrafast optical switching and modulating are desired.
Collapse
|
14
|
Fu B, Sun J, Wang C, Shang C, Xu L, Li J, Zhang H. MXenes: Synthesis, Optical Properties, and Applications in Ultrafast Photonics. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2021; 17:e2006054. [PMID: 33590637 DOI: 10.1002/smll.202006054] [Citation(s) in RCA: 27] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/28/2020] [Revised: 12/31/2020] [Indexed: 06/12/2023]
Abstract
Recently, 2D materials are in great demand for various applications such as optical devices, supercapacitors, sensors, and biomedicine. MXenes as a kind of novel 2D material have attracted considerable research interest due to their outstanding mechanical, thermal, electrical, and optical properties. Especially, the excellent nonlinear optical response enables them to be potential candidates for the applications in ultrafast photonics. Here, a review of MXenes synthesis, optical properties, and applications in ultrafast lasers is presented. First, aqueous acid etching and chemical vapor deposition methods for preparing MXenes are introduced, in which the storage stability and challenges of the existing synthesis techniques are also discussed. Then, the optical properties of MXenes are discussed specifically, including plasmonic properties, optical detection, photothermal effects, and ultrafast dynamics. Furthermore, the typical ultrafast pulsed lasers enabled by MXene-based saturable absorbers operated at different wavelength regions are summarized. Finally, a summary and outlook on the development of MXenes is presented in the perspectives section.
Collapse
Affiliation(s)
- Bo Fu
- BUAA-CCMU Advanced Innovation Center for Big Data-Based Precision Medicine, School of Medicine and Engineering, Beihang University, Beijing, 100191, China
- Key Laboratory of Big Data-Based Precision Medicine, Ministry of Industry and Information Technology, Interdisciplinary Innovation Institute of Medicine and Engineering, Beihang University, Beijing, 100191, China
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing, 100191, China
| | - Jingxuan Sun
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing, 100191, China
| | - Cong Wang
- Shenzhen Engineering Laboratory of Phosphorene and Optoelectronics, Collaborative Innovation Center for Optoelectronic Science and Technology, College of Optoelectronic Engineering, Shenzhen University, Shenzhen, 518060, China
| | - Ce Shang
- BUAA-CCMU Advanced Innovation Center for Big Data-Based Precision Medicine, School of Medicine and Engineering, Beihang University, Beijing, 100191, China
- School of Biological Science and Medical Engineering, Beihang University, Beijing, 100191, China
| | - Lijun Xu
- BUAA-CCMU Advanced Innovation Center for Big Data-Based Precision Medicine, School of Medicine and Engineering, Beihang University, Beijing, 100191, China
- School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing, 100191, China
| | - Jiebo Li
- School of Biological Science and Medical Engineering, Beihang University, Beijing, 100191, China
- Beijing Advanced Innovation Center for Biomedical Engineering, Beihang University, Beijing, 100191, China
| | - Han Zhang
- Shenzhen Engineering Laboratory of Phosphorene and Optoelectronics, Collaborative Innovation Center for Optoelectronic Science and Technology, College of Optoelectronic Engineering, Shenzhen University, Shenzhen, 518060, China
| |
Collapse
|
15
|
Wei C, Chi H, Jiang S, Zheng L, Zhang H, Liu Y. Long-term stable platinum diselenide for nanosecond pulse generation in a 3-µm mid-infrared fiber laser. OPTICS EXPRESS 2020; 28:33758-33766. [PMID: 33115035 DOI: 10.1364/oe.410110] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/14/2020] [Accepted: 10/19/2020] [Indexed: 06/11/2023]
Abstract
In this paper, we fabricate the bulk-like multilayer platinum diselenide (PtSe2) and employ it as saturable absorber (SA) for a passively Q-switched fiber laser operating at 2865 nm for the first time, to the best of our knowledge. The nonlinear optical measurements of the bulk-like multilayer PtSe2 reveal efficient saturable absorption property at around 3 µm showing a modulation depth of 8.54% and a saturation intensity of 0.074 GW/cm2. By introducing the bulk-like PtSe2-SA into the Ho3+/Pr3+ co-doped ZBLAN fiber laser, stable Q-switched pulses with a duration as short as 620 ns are achieved at the pulse repetition rate of 238.1 kHz. The maximum average power is 93 mW, corresponding to a peak power of 0.63 W. The excellent long-term stability of the PtSe2-SA was also verified utilizing the same experimental setup after 40 days of ambient storage of the PtSe2 sample. The results not only validate the excellent nonlinear optical performance of PtSe2, but also indicate that the bulk-like PtSe2 is a promising long-term stable SA material under ambient conditions for nanosecond pulse generation in the 3-µm mid-infrared spectral region.
Collapse
|
16
|
Hao Q, Guo J, Yin L, Ning T, Ge Y, Liu J. Watt-level ultrafast bulk laser with a graphdiyne saturable absorber mirror. OPTICS LETTERS 2020; 45:5554-5557. [PMID: 33001945 DOI: 10.1364/ol.404540] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/03/2020] [Accepted: 09/02/2020] [Indexed: 06/11/2023]
Abstract
Few-layered graphdiyne (GDY) was successfully fabricated and applied as a saturable absorber to generate a watt-level ultrafast solid-state bulk laser. The maximum output power of up to 1.27 W was obtained with a pulse width of 23 ps and a repetition rate of 92.9 MHz, using Nd:YVO4 crystal as a gain medium. To the best of our knowledge, this is the first application of GDY as a mode locker in all-solid-state bulk lasers. These results indicate the promising potential of GDY for producing high-power ultrafast lasers.
Collapse
|
17
|
Lee J, Jhon YI, Lee K, Jhon YM, Lee JH. Nonlinear optical properties of arsenic telluride and its use in ultrafast fiber lasers. Sci Rep 2020; 10:15305. [PMID: 32943737 PMCID: PMC7498598 DOI: 10.1038/s41598-020-72265-3] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/03/2020] [Accepted: 08/17/2020] [Indexed: 11/09/2022] Open
Abstract
We report the first investigation results of the nonlinear optical properties of As2Te3. More specifically, the nonlinear optical absorption properties of the prepared α-As2Te3 were investigated at wavelengths of 1.56 and 1.9 μm using the open-aperture (OA) Z-scan technique. Using the OA Z-scan technique, the nonlinear absorption coefficients (β) of α-As2Te3 were estimated in a range from (- 54.8 ± 3.4) × 104 cm/GW to (- 4.9 ± 0.4) × 104 cm/GW depending on the irradiance of the input beam at 1.56 μm, whereas the values did from (- 19.8 ± 0.8) × 104 cm/GW to (- 3.2 ± 0.1) × 104 cm/GW at 1.9 μm. In particular, the β value at 1.56 μm is an order of magnitude larger than the previously reported values of other group-15 sesquichalcogenides such as Bi2Se3, Bi2Te3, and Bi2TeSe2. Furthermore, this is the first time report on β value of a group-15 sesquichalcogenide at a 1.9-μm wavelength. The density functional theory (DFT) calculations of the electronic band structures of α-As2Te3 were also conducted to obtain a better understanding of their energy band structure. The DFT calculations indicated that α-As2Te3 possess sufficient optical absorption in a wide wavelength region, including 1.5 μm, 1.9 μm, and beyond (up to 3.7 μm). Using both the measured nonlinear absorption coefficients and the theoretically obtained refractive indices from the DFT calculations, the imaginary parts of the third-order optical susceptibilities (Im χ(3)) of As2Te3 were estimated and they were found to vary from (- 39 ± 2.4) × 10-19 m2/V2 to (- 3.5 ± 0.3) × 10-19 m2/V2 at 1.56 μm and (- 16.5 ± 0.7) × 10-19 m2/V2 to (- 2.7 ± 0.1) × 10-19 m2/V2 at 1.9 μm, respectively, depending on the irradiance of the input beam. Finally, the feasibility of using α-As2Te3 for SAs was investigated, and the prepared SAs were thus tested by incorporating them into an erbium (Er)-doped fiber cavity and a thulium-holmium (Tm-Ho) co-doped fiber cavity for both 1.5 and 1.9 μm operation.
Collapse
Affiliation(s)
- Jinho Lee
- School of Electrical and Computer Engineering, University of Seoul, Seoul, 02504, South Korea
| | - Young In Jhon
- School of Electrical and Computer Engineering, University of Seoul, Seoul, 02504, South Korea
| | - Kyungtaek Lee
- School of Electrical and Computer Engineering, University of Seoul, Seoul, 02504, South Korea
| | - Young Min Jhon
- Sensor System Research Center, Korea Institute of Science and Technology, Seoul, 02792, South Korea
| | - Ju Han Lee
- School of Electrical and Computer Engineering, University of Seoul, Seoul, 02504, South Korea.
| |
Collapse
|
18
|
Wei Q, Han X, Zhang H, Yang C, Zhang C, Gao J, Man B, Xu S. CVD-Bi 2Te 3 as a saturable absorber for various solitons in a mode-locked Er-doped fiber laser. APPLIED OPTICS 2020; 59:7792-7800. [PMID: 32976449 DOI: 10.1364/ao.397625] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/14/2020] [Accepted: 07/16/2020] [Indexed: 06/11/2023]
Abstract
In this work, we report about high energy and various solitons' operation by using high-efficiency topological insulator bismuth telluride (Bi2Te3) nanofilms as broadband saturable absorbers in the passively mode-locked Er-doped fiber laser. The Bi2Te3 film was successfully synthesized by chemical vapor deposition (CVD). Excellent characteristics of the dark-bright pulse pairs, bright pulses, and multiharmonics have been investigated experimentally by adjusting the polarization state. At the same time, the maximum average output power was 40.18 mW, and the single-pulse energy was 20.91 nJ. As we all know, it is the various solitons of the first generation with large pulse energy in an Er-doped fiber laser with Bi2Te3 as saturable absorber. The experimental results show that CVD Bi2Te3 can be used as an excellent candidate in mode-locked fiber lasers.
Collapse
|
19
|
Ahmad H, Kamely AA, Yusoff N, Bayang L, Samion MZ. Generation of Q-switched Pulses in Thulium-doped and Thulium/Holmium-co-doped Fiber Lasers using MAX phase (Ti 3AlC 2). Sci Rep 2020; 10:9233. [PMID: 32514045 PMCID: PMC7280305 DOI: 10.1038/s41598-020-66141-3] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/20/2020] [Accepted: 04/24/2020] [Indexed: 11/08/2022] Open
Abstract
A MAX phase Ti3AlC2 thin film is demonstrated as a saturable absorber (SA) to induce Q-switching in the 2.0 μm region. The Ti3AlC2 thin film is sandwiched between two fiber ferrules and integrated into thulium doped fiber laser (TDFL) and thulium-holmium doped fiber laser (THDFL) cavities. Stable Q-switched pulses are observed at 1980.79 nm and 1959.3 nm in the TDFL and THDFL cavities respectively, with repetition rates of 32.57 kHz and 21.94 kHz and corresponding pulse widths of 2.72 μs and 3.9 μs for both cavities. The performance of the Ti3AlC2 based SA for Q-switching operation indicates the high potential of other MAX phase materials to serve as SAs in future photonics systems.
Collapse
Affiliation(s)
- H Ahmad
- Photonics Research Centre, University of Malaya, 50603, Kuala Lumpur, Malaysia.
- Physics Dept., Faculty of Science, University of Malaya, 50603, Kuala Lumpur, Malaysia.
| | - A A Kamely
- Photonics Research Centre, University of Malaya, 50603, Kuala Lumpur, Malaysia
| | - N Yusoff
- Photonics Research Centre, University of Malaya, 50603, Kuala Lumpur, Malaysia
| | - L Bayang
- Photonics Research Centre, University of Malaya, 50603, Kuala Lumpur, Malaysia
| | - M Z Samion
- Photonics Research Centre, University of Malaya, 50603, Kuala Lumpur, Malaysia
| |
Collapse
|
20
|
Wang J, Coillet A, Demichel O, Wang Z, Rego D, Bouhelier A, Grelu P, Cluzel B. Saturable plasmonic metasurfaces for laser mode locking. LIGHT, SCIENCE & APPLICATIONS 2020; 9:50. [PMID: 32257181 PMCID: PMC7109045 DOI: 10.1038/s41377-020-0291-2] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/16/2019] [Revised: 03/02/2020] [Accepted: 03/13/2020] [Indexed: 05/27/2023]
Abstract
Metamaterials are artificial materials made of subwavelength elementary cells that give rise to unexpected wave properties that do not exist naturally. However, these properties are generally achieved due to 3D patterning, which is hardly feasible at short wavelengths in the visible and near-infrared regions targeted by most photonic applications. To overcome this limitation, metasurfaces, which are the 2D counterparts of metamaterials, have emerged as promising platforms that are compatible with planar nanotechnologies and thus mass production, which platforms the properties of a metamaterial into a 2D sheet. In the linear regime, wavefront manipulation for lensing, holography, and polarization control has been achieved recently. Interest in metasurfaces operating in the nonlinear regime has also increased due to the ability of metasurfaces to efficiently convert incident light into harmonic frequencies with unusual polarization properties. However, to date, the nonlinear absorption of metasurfaces has been mostly ignored. Here, we demonstrate that plasmonic metasurfaces behave as saturable absorbers with modulation performances superior to the modulation performance of other 2D materials and exhibit unusual polarimetric nonlinear transfer functions. We quantify the link between saturable absorption, the plasmonic resonances of the unit cell and their distribution in a 2D metasurface, and finally provide a practical implementation by integrating the metasurfaces into a fiber laser cavity operating in pulsed regimes driven by the metasurface properties. As such, this work provides new perspectives on ultrathin nonlinear saturable absorbers for applications where tunable nonlinear transfer functions are needed, such as in ultrafast lasers or neuromorphic circuits.
Collapse
Affiliation(s)
- Jiyong Wang
- Laboratoire Interdisciplinaire Carnot de Bourgogne, Université Bourgogne Franche-Comté, 9 avenue Alain Savary, 21078 Dijon, France
- Key Laboratory of 3D Micro/Nano Fabrication and Characterization of Zhejiang Province, School of Engineering, Westlake University, 18 Shilongshan Road, 310024 Hangzhou, Zhejiang Province China
- Institute of Advanced Technology, Westlake Institute for Advanced Study, 18 Shilongshan Road, 310024 Hangzhou, Zhejiang Province China
| | - Aurelien Coillet
- Laboratoire Interdisciplinaire Carnot de Bourgogne, Université Bourgogne Franche-Comté, 9 avenue Alain Savary, 21078 Dijon, France
| | - Olivier Demichel
- Laboratoire Interdisciplinaire Carnot de Bourgogne, Université Bourgogne Franche-Comté, 9 avenue Alain Savary, 21078 Dijon, France
| | - Zhiqiang Wang
- Laboratoire Interdisciplinaire Carnot de Bourgogne, Université Bourgogne Franche-Comté, 9 avenue Alain Savary, 21078 Dijon, France
| | - Davi Rego
- Laboratoire Interdisciplinaire Carnot de Bourgogne, Université Bourgogne Franche-Comté, 9 avenue Alain Savary, 21078 Dijon, France
- Department of Electrotechnology, Federal Institute of Bahia, R. Emídio dos Santos, 40301015 Salvador, Brazil
| | - Alexandre Bouhelier
- Laboratoire Interdisciplinaire Carnot de Bourgogne, Université Bourgogne Franche-Comté, 9 avenue Alain Savary, 21078 Dijon, France
| | - Philippe Grelu
- Laboratoire Interdisciplinaire Carnot de Bourgogne, Université Bourgogne Franche-Comté, 9 avenue Alain Savary, 21078 Dijon, France
| | - Benoit Cluzel
- Laboratoire Interdisciplinaire Carnot de Bourgogne, Université Bourgogne Franche-Comté, 9 avenue Alain Savary, 21078 Dijon, France
| |
Collapse
|
21
|
Zhai XP, Ma B, Wang Q, Zhang HL. 2D materials towards ultrafast photonic applications. Phys Chem Chem Phys 2020; 22:22140-22156. [DOI: 10.1039/d0cp02841j] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
Abstract
Two-dimensional materials are now excelling in yet another arena of ultrafast photonics, including optical modulation through optical limiting/mode-locking, photodetectors, optical communications, integrated miniaturized all-optical devices, etc.
Collapse
Affiliation(s)
- Xin-Ping Zhai
- State Key Laboratory of Applied Organic Chemistry (SKLAOC)
- Key Laboratory of Nonferrous Metal Chemistry and Resources Utilization of Gansu Province
- College of Chemistry and Chemical Engineering
- Key Laboratory of Special Function Materials and Structure Design
- Ministry of Education
| | - Bo Ma
- State Key Laboratory of Applied Organic Chemistry (SKLAOC)
- Key Laboratory of Nonferrous Metal Chemistry and Resources Utilization of Gansu Province
- College of Chemistry and Chemical Engineering
- Key Laboratory of Special Function Materials and Structure Design
- Ministry of Education
| | - Qiang Wang
- State Key Laboratory of Applied Organic Chemistry (SKLAOC)
- Key Laboratory of Nonferrous Metal Chemistry and Resources Utilization of Gansu Province
- College of Chemistry and Chemical Engineering
- Key Laboratory of Special Function Materials and Structure Design
- Ministry of Education
| | - Hao-Li Zhang
- State Key Laboratory of Applied Organic Chemistry (SKLAOC)
- Key Laboratory of Nonferrous Metal Chemistry and Resources Utilization of Gansu Province
- College of Chemistry and Chemical Engineering
- Key Laboratory of Special Function Materials and Structure Design
- Ministry of Education
| |
Collapse
|
22
|
Zheng Z, Wang J, Yin J, Ouyang D, Ren X, Yan P, Wang J, Pei J, Lue Q, Ruan S. High-power mode-locked thulium-doped fiber laser with tungsten ditelluride as saturable absorber. APPLIED OPTICS 2020; 59:196-200. [PMID: 32225288 DOI: 10.1364/ao.59.000196] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/22/2019] [Accepted: 11/28/2019] [Indexed: 06/10/2023]
Abstract
A passively mode-locked thulium-doped fiber laser using a tungsten ditelluride saturable absorber (${{\rm WTe}_2}\mbox{-}{\rm SA}$WTe2-SA) is demonstrated. High-power mode-locked pulses with an average output power of 108.1 mW were achieved by incorporating the ${{\rm WTe}_2}\mbox{-}{\rm SA}$WTe2-SA into a thulium-doped fiber oscillator. To the best of our knowledge, this is the highest average power obtained from a ${{\rm WTe}_2}\mbox{-}{\rm SA}$WTe2-SA-based fiber laser. We further amplified the output power to 5.60 W with an all-fiber thulium-doped double-cladding fiber amplifier. Our result indicates that ${{\rm WTe}_2}\mbox{-}{\rm SA}$WTe2-SA could be an excellent candidate for a high-power fiber laser system.
Collapse
|
23
|
Jafry AAA, Kasim N, Muhammad AR, Rosol AHA, Yusoff RAM, Mahyuddin MBH, Zulkipli NF, Samsamnun FSM, Harun SW. Q-switched ytterbium-doped fiber laser based on evanescent field interaction with lutetium oxide. APPLIED OPTICS 2019; 58:9670-9676. [PMID: 31873567 DOI: 10.1364/ao.58.009670] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/29/2019] [Accepted: 10/31/2019] [Indexed: 06/10/2023]
Abstract
We demonstrated lutetium oxide (${\textrm{Lu}_2}{\textrm{O}_3}$Lu2O3) deposited onto D-shaped fiber producing Q-switched ytterbium-doped fiber laser (YDFL) with an operating wavelength of 1037 nm. D-shaped fiber ${\textrm{Lu}_2}{\textrm{O}_3}$Lu2O3 as a saturable absorber (SA) was prepared using a polishing-wheel technique by polishing 2 times to establish an excellent evanescent field interaction between material and light on the surface of the polished region. The SA was deployed into a YDFL to generate Q-switching. The proposed D-shaped fiber ${\textrm{Lu}_2}{\textrm{O}_3}$Lu2O3 initiated pulses as short as 3.6 µs, with the highest repetition rate of 65.8 kHz. Stability of the SA is proven, as it produced stable pulses within the pump power of 99 to 133 mW with an SNR of 62.13 dB. Q-switched YDFL generates pulses with an output power of 0.93 to 1.99 mW and pulse energy of 17 to 30 nJ. We obtained a laser cavity with the optical-to-optical efficiency of 3.33%, which was the highest among D-shaped fiber-deposited SA materials in YDFL. Therefore, ${\textrm{Lu}_2}{\textrm{O}_3}$Lu2O3 deposited onto D-shaped fiber can be deployed as an SA in YDFL for a portable Q-switched laser source.
Collapse
|
24
|
He J, Tao L, Zhang H, Zhou B, Li J. Emerging 2D materials beyond graphene for ultrashort pulse generation in fiber lasers. NANOSCALE 2019; 11:2577-2593. [PMID: 30693933 DOI: 10.1039/c8nr09368g] [Citation(s) in RCA: 68] [Impact Index Per Article: 13.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/16/2023]
Abstract
Ultrafast fiber lasers have significant applications in ultra-precision manufacturing, medical diagnostics, medical treatment, precision measurement and astronomical detection, owing to their ultra-short pulse width and ultra-high peak-power. Since graphene was first explored as an optical saturable absorber for passively mode-locked lasers in 2009, many other 2D materials beyond graphene, including phosphorene, antimonene, bismuthene, transition metal dichalcogenides (TMDs), topological insulators (TIs), metal-organic frameworks (MOFs) and MXenes, have been successively explored, resulting in rapid development of novel 2D materials-based saturable absorbers. Herein, we review the latest progress of the emerging 2D materials beyond graphene for passively mode-locked fiber laser application. These 2D materials are classified into mono-elemental, dual-elemental and multi-elemental 2D materials. The atomic structure, band structure, nonlinear optical properties, and preparation methods of 2D materials are summarized. Diverse integration strategies for applying 2D materials into fiber laser systems are introduced, and the mode-locking performance of the 2D materials-based fiber lasers working at 1-3 μm are discussed. Finally, the perspectives and challenges facing 2D materials-based mode-locked fiber lasers are highlighted.
Collapse
Affiliation(s)
- Junshan He
- School of Materials and Energy, Guangdong University of Technology, Guangzhou, 510006, China.
| | | | | | | | | |
Collapse
|
25
|
Li Y, Wang L, Kang Y, Guo X, Tong L. Microfiber-enabled dissipative soliton fiber laser at 2 μm. OPTICS LETTERS 2018; 43:6105-6108. [PMID: 30548016 DOI: 10.1364/ol.43.006105] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/21/2018] [Accepted: 11/19/2018] [Indexed: 06/09/2023]
Abstract
Optical microfibers can show very strong normal dispersion (as high as 2700 ps2/km) around 2 μm, a highly desired feature for dispersion management in ultrafast lasers. Here we report a dissipative soliton fiber laser at 2 μm enabled by an optical microfiber. The full width at half-maximum of the optical spectrum was about 50 nm, and its flatness could be attributed to the third-order dispersion compensation provided by the optical microfiber. The pulse duration was measured to be 195 fs after a dechirping single-mode fiber. Our results suggest a new route to dissipative soliton fiber lasers at 2 μm, with a wide and flat spectrum and thus a short dechirped pulse.
Collapse
|
26
|
Qin J, Dai R, Li Y, Meng Y, Xu Y, Zhu S, Wang F. 20 GHz actively mode-locked thulium fiber laser. OPTICS EXPRESS 2018; 26:25769-25777. [PMID: 30469673 DOI: 10.1364/oe.26.025769] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/30/2018] [Accepted: 09/11/2018] [Indexed: 06/09/2023]
Abstract
A high repetition-rate actively mode-locked thulium fiber laser is demonstrated where an electro-optic lithium niobate phase modulator is used to synchronize the longitudinal modes in the cavity. The repetition rate of the actively mode-locked laser is tunable from 14.6 MHz to 19 GHz, where the 19 GHz pulses exhibit a super-mode suppression ratio of 46 dB. Furthermore, the output pulse width could be manipulated through finely controlling the detuning frequency or repetition rate. We have also experimentally observed rational harmonic mode-locking in the laser and obtained 14 GHz and 21 GHz repetition rate pulses using a 7 GHz modulating signal. To the best of our knowledge, we have improved the repetition-rate of actively mode-locked thulium fiber laser by more than one order of magnitude. Such a high repetition source can be readily synchronized to a master clock, which makes it very suitable for high speed optical data processing, communication and remote sensing.
Collapse
|
27
|
Guo B, Wang SH, Wu ZX, Wang ZX, Wang DH, Huang H, Zhang F, Ge YQ, Zhang H. Sub-200 fs soliton mode-locked fiber laser based on bismuthene saturable absorber. OPTICS EXPRESS 2018; 26:22750-22760. [PMID: 30184930 DOI: 10.1364/oe.26.022750] [Citation(s) in RCA: 28] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/12/2023]
Abstract
Few-layer bismuthene is an emerging two-dimensional material in the fields of physics, chemistry, and material science. However, its nonlinear optical property and the related photonics device have been seldom studied so far. Here, we demonstrate a sub-200 fs soliton mode-locked erbium-doped fiber laser (EDFL) using a microfiber-based bismuthene saturable absorber for the first time, to the best of our knowledge. The bismuthene nanosheets are synthesized by the sonochemical exfoliation method and transferred onto the taper region of a microfiber by the optical deposition method. Stable soliton pulses centered at 1561 nm with the shortest pulse duration of about 193 fs were obtained. Our findings unambiguously imply that apart from its fantastic electric and thermal properties, few-layer bismuthene may also possess attractive optoelectronic properties for nonlinear photonics, such as mode-lockers, Q-switchers, optical modulators and so on.
Collapse
|
28
|
Hou L, Guo H, Wang Y, Sun J, Lin Q, Bai Y, Bai J. Sub-200 femtosecond dispersion-managed soliton ytterbium-doped fiber laser based on carbon nanotubes saturable absorber. OPTICS EXPRESS 2018; 26:9063-9070. [PMID: 29715864 DOI: 10.1364/oe.26.009063] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/07/2018] [Accepted: 03/20/2018] [Indexed: 06/08/2023]
Abstract
Ultrafast fiber laser light sources attract enormous interest due to the booming applications they are enabling, including long-distance communication, optical metrology, detecting technology of infra-biophotons, and novel material processing. In this paper, we demonstrate 175 fs dispersion-managed soliton (DMS) mode-locked ytterbium-doped fiber (YDF) laser based on single-walled carbon nanotubes (SWCNTs) saturable absorber (SA). The output DMSs have been achieved with repetition rate of 21.2 MHz, center wavelength of 1025.5 nm, and a spectral width of 32.7 nm. The operation directly pulse duration of 300 fs for generated pulse is the reported shortest pulse width for broadband SA based YDF lasers. By using an external grating-based compressor, the pulse duration could be compressed down to 175 fs. To the best of our knowledge, it is the shortest pulse duration obtained directly from YDF laser based on broadband SAs. In this paper, SWCNTs-SA has been utilized as the key optical component (mode locker) and the grating pair providing negative dispersion acts as the dispersion controller.
Collapse
|
29
|
Meng Y, Zhu C, Li Y, Yuan X, Xiu F, Shi Y, Xu Y, Wang F. Three-dimensional Dirac semimetal thin-film absorber for broadband pulse generation in the near-infrared. OPTICS LETTERS 2018; 43:1503-1506. [PMID: 29601015 DOI: 10.1364/ol.43.001503] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/17/2018] [Accepted: 02/17/2018] [Indexed: 06/08/2023]
Abstract
In this Letter, the transient nonlinear absorption of three-dimensional (3D) topological Dirac semimetal Cd3As2 thin film was characterized in the near-infrared band. By performing broadband pump-probe measurements, we experimentally proved that molecular beam epitaxy (MBE) grown Cd3As2 exhibits strong and tunable saturable absorption effects across 1-2 μm. By further inserting the Cd3As2 film into the cavities of Tm- and Er-doped fiber lasers, we obtained stable mode-locked operations at 1.96 and 1.56 μm. Our results experimentally establish that Cd3As2 is a promising broadband saturable absorber (SA) for pulsed lasers in the infrared range.
Collapse
|
30
|
Bismuth Telluride nanocrystal: broadband nonlinear response and its application in ultrafast photonics. Sci Rep 2018; 8:2355. [PMID: 29403019 PMCID: PMC5799367 DOI: 10.1038/s41598-018-20559-y] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/03/2017] [Accepted: 01/22/2018] [Indexed: 11/08/2022] Open
Abstract
We come up with a hybrid liquid exfoliation method to prepare bismuth telluride nanocrystals efficiently and cost-effectively. The nonlinear transmittance of the nanocrystals has been characterized with Z-scan technique, which can manifest its broadband saturable absorption behavior experimentally. The as-fabricated nanocrystals were integrated onto fiber end facet to form a fiber compatible nonlinear absorption device with optical deposition method, which was then used to modulate the fiber laser with different cavity configurations to deliver pulsed laser successfully. The noise-like pulse and dissipative soliton have been obtained with wavelength centered at 1562 nm and 1068 nm, respectively. These results confirm the effectiveness of the hybrid liquid exfoliation method to prepare bismuth telluride into nanocrystals, and the broadband nonlinear optical response and ultrafast photonics application potential of the nanocrystals.
Collapse
|
31
|
Pawliszewska M, Martynkien T, Przewłoka A, Sotor J. Dispersion-managed Ho-doped fiber laser mode-locked with a graphene saturable absorber. OPTICS LETTERS 2018; 43:38-41. [PMID: 29328191 DOI: 10.1364/ol.43.000038] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/20/2017] [Accepted: 11/25/2017] [Indexed: 06/07/2023]
Abstract
In this Letter, we demonstrate an all-fiber holmium-doped laser operating in the stretched-pulse regime. As a result of dispersion management, the laser is capable of generating 190 fs pulses with a bandwidth of 53.6 nm. The pulses centered at 2060 nm reach 2.55 nJ of energy. Mode-locking is achieved with a multilayer graphene saturable absorber (SA). The Letter also presents the measurement of group velocity dispersion of active (Nufern SM-HDF-10/130), passive (SMF28), and dispersion-compensating (Nufern UHNA4) fibers in a 1.8-2.1 μm range. To the best of our knowledge, this is the first report on an all-fiber, stretched-pulse laser operating beyond 2 μm with nanomaterial-based SA.
Collapse
|
32
|
Wang J, Jiang Z, Chen H, Li J, Yin J, Wang J, He T, Yan P, Ruan S. Magnetron-sputtering deposited WTe 2for an ultrafast thulium-doped fiber laser. OPTICS LETTERS 2017; 42:5010-5013. [PMID: 29216179 DOI: 10.1364/ol.42.005010] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/25/2017] [Accepted: 10/29/2017] [Indexed: 06/07/2023]
Abstract
Ultrafast pulse generation was demonstrated in a thulium-doped fiber laser mode-locked by magnetron-sputtering deposited WTe2 with a modulation depth, a nonsaturable loss, and a saturable intensity of 31%, 34.3%, and 7.6 MW/cm2, respectively. Stable soliton pulses could be obtained at a 1915.5 nm central wavelength with a pulse duration of 1.25 ps, an average output power of 39.9 mW, and a signal-to-noise ratio of 95 dB. To the best of our knowledge, this was the first demonstration of WTe2-based saturable absorbers in fiber lasers at a 2 μm regime.
Collapse
|
33
|
Pawliszewska M, Ge Y, Li Z, Zhang H, Sotor J. Fundamental and harmonic mode-locking at 2.1 μm with black phosphorus saturable absorber. OPTICS EXPRESS 2017; 25:16916-16921. [PMID: 28789191 DOI: 10.1364/oe.25.016916] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/24/2017] [Accepted: 06/01/2017] [Indexed: 06/07/2023]
Abstract
We report mode-locking in holmium-doped all-fiber laser based on black phosphorus saturable absorber. The generated solitons are centered at 2094 nm with bandwidth reaching 4.2 nm and pulse duration of 1.3 ps. In harmonic mode-locking, up to 10th harmonic (290 MHz) was obtained. Properties of black phosphorus saturable absorber are investigated. Our findings validate black phosphorus suitability for ultrafast applications in mid-infrared.
Collapse
|
34
|
Tian W, Yu W, Shi J, Wang Y. The Property, Preparation and Application of Topological Insulators: A Review. MATERIALS (BASEL, SWITZERLAND) 2017; 10:E814. [PMID: 28773173 PMCID: PMC5551857 DOI: 10.3390/ma10070814] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/22/2017] [Revised: 07/09/2017] [Accepted: 07/10/2017] [Indexed: 01/14/2023]
Abstract
Topological insulator (TI), a promising quantum and semiconductor material, has gapless surface state and narrow bulk band gap. Firstly, the properties, classifications and compounds of TI are introduced. Secondly, the preparation and doping of TI are assessed. Some results are listed. (1) Although various preparation methods are used to improve the crystal quality of the TI, it cannot reach the industrialization. Fermi level regulation still faces challenges; (2) The carrier type and lattice of TI are affected by non-magnetic impurities. The most promising property is the superconductivity at low temperature; (3) Magnetic impurities can destroy the time-reversal symmetry of the TI surface, which opens the band gap on the TI surface resulting in some novel physical effects such as quantum anomalous Hall effect (QAHE). Thirdly, this paper summarizes various applications of TI including photodetector, magnetic device, field-effect transistor (FET), laser, and so on. Furthermore, many of their parameters are compared based on TI and some common materials. It is found that TI-based devices exhibit excellent performance, but some parameters such as signal to noise ratio (S/N) are still lower than other materials. Finally, its advantages, challenges and future prospects are discussed. Overall, this paper provides an opportunity to improve crystal quality, doping regulation and application of TI.
Collapse
Affiliation(s)
- Wenchao Tian
- School of Electro-Mechanical Engineering, Xidian University, Number 2 Taibai South Road, Xi'an 710071, China.
| | - Wenbo Yu
- School of Electro-Mechanical Engineering, Xidian University, Number 2 Taibai South Road, Xi'an 710071, China.
| | - Jing Shi
- School of Electro-Mechanical Engineering, Xidian University, Number 2 Taibai South Road, Xi'an 710071, China.
| | - Yongkun Wang
- School of Electro-Mechanical Engineering, Xidian University, Number 2 Taibai South Road, Xi'an 710071, China.
| |
Collapse
|
35
|
Sotor J, Bogusławski J, Martynkien T, Mergo P, Krajewska A, Przewłoka A, StrupiŃski W, SoboŃ G. All-polarization-maintaining, stretched-pulse Tm-doped fiber laser, mode-locked by a graphene saturable absorber. OPTICS LETTERS 2017; 42:1592-1595. [PMID: 28409806 DOI: 10.1364/ol.42.001592] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
In this Letter, we demonstrate an all-polarization-maintaining, stretched-pulse Tm-doped fiber laser generating ∼200 fs pulses centered at 1945 nm. As a saturable absorber, a graphene/poly(methyl methacrylate) composite was used. To the best of our knowledge, this is the first demonstration of stretched-pulse operation of a graphene-based fiber laser at 2 μm.
Collapse
|
36
|
CNT-based saturable absorbers with scalable modulation depth for Thulium-doped fiber lasers operating at 1.9 μm. Sci Rep 2017; 7:45491. [PMID: 28368014 PMCID: PMC5377377 DOI: 10.1038/srep45491] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/17/2016] [Accepted: 02/28/2017] [Indexed: 11/25/2022] Open
Abstract
In this work, we demonstrate a comprehensive study on the nonlinear parameters of carbon nanotube (CNT) saturable absorbers (SA) as a function of the nanotube film thickness. We have fabricated a set of four saturable absorbers with different CNT thickness, ranging from 50 to 200 nm. The CNTs were fabricated via a vacuum filtration technique and deposited on fiber connector end facets. Each SA was characterized in terms of nonlinear transmittance (i.e. optical modulation depth) and tested in a Thulium-doped fiber laser. We show, that increasing the thickness of the CNT layer significantly increases the modulation depth (up to 17.3% with 200 nm thick layer), which strongly influences the central wavelength of the laser, but moderately affects the pulse duration. It means, that choosing the SA with defined CNT thickness might be an efficient method for wavelength-tuning of the laser, without degrading the pulse duration. In our setup, the best performance in terms of bandwidth and pulse duration (8.5 nm and 501 fs, respectively) were obtained with 100 nm thick CNT layer. This is also, to our knowledge, the first demonstration of a fully polarization-maintaining mode-locked Tm-doped laser based on CNT saturable absorber.
Collapse
|
37
|
Liu X, Guo Q, Qiu J. Emerging Low-Dimensional Materials for Nonlinear Optics and Ultrafast Photonics. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2017; 29:1605886. [PMID: 28225160 DOI: 10.1002/adma.201605886] [Citation(s) in RCA: 98] [Impact Index Per Article: 14.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/01/2016] [Revised: 12/14/2016] [Indexed: 06/06/2023]
Abstract
Low-dimensional (LD) materials demonstrate intriguing optical properties, which lead to applications in diverse fields, such as photonics, biomedicine and energy. Due to modulation of electronic structure by the reduced structural dimensionality, LD versions of metal, semiconductor and topological insulators (TIs) at the same time bear distinct nonlinear optical (NLO) properties as compared with their bulk counterparts. Their interaction with short pulse laser excitation exhibits a strong nonlinear character manifested by NLO absorption, giving rise to optical limiting or saturated absorption associated with excited state absorption and Pauli blocking in different materials. In particular, the saturable absorption of these emerging LD materials including two-dimensional semiconductors as well as colloidal TI nanoparticles has recently been utilized for Q-switching and mode-locking ultra-short pulse generation across the visible, near infrared and middle infrared wavelength regions. Beside the large operation bandwidth, these ultrafast photonics applications are especially benefit from the high recovery rate as well as the facile processibility of these LD materials. The prominent NLO response of these LD materials have also provided new avenues for the development of novel NLO and photonics devices for all-optical control as well as optical circuits beyond ultrafast lasers.
Collapse
Affiliation(s)
- Xiaofeng Liu
- School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, P. R. China
- State Key Laboratory of Modern Optical Instrumentation, Zhejiang University, Hangzhou, 310027, P. R. China
| | - Qiangbing Guo
- School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, P. R. China
- State Key Laboratory of Modern Optical Instrumentation, Zhejiang University, Hangzhou, 310027, P. R. China
| | - Jianrong Qiu
- State Key Laboratory of Modern Optical Instrumentation, Zhejiang University, Hangzhou, 310027, P. R. China
- College of Optical Science and Engineering, Zhejiang University, Hangzhou, 310027, P. R. China
| |
Collapse
|
38
|
Meng Y, Li Y, Xu Y, Wang F. Carbon Nanotube Mode-Locked Thulium Fiber Laser With 200 nm Tuning Range. Sci Rep 2017; 7:45109. [PMID: 28322327 PMCID: PMC5359638 DOI: 10.1038/srep45109] [Citation(s) in RCA: 69] [Impact Index Per Article: 9.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/11/2016] [Accepted: 02/17/2017] [Indexed: 11/09/2022] Open
Abstract
We demonstrated a mode-locked thulium/holmium (Tm/Ho) fiber laser continuously tunable across 200 nm (from 1860 nm to 2060 nm), which to the best of our knowledge represents the widest tuning range ever achieved for a passively mode-locked fiber laser oscillator. The combined use of a broadband carbon nanotube (CNT) saturable absorber and a diffraction grating mirror ensures ultra-broad tuning range, superb stability and repeatability, and makes the demonstrated laser a highly practical source for spectroscopy, imaging and optical communications. The laser emits <5 ps pulses with an optical spectral bandwidth of ∼3 nm across the full tuning range. Our results indicate that carbon nanotubes can be an excellent saturable absorber for achieving gain-bandwidth-limited tunable operation for 2 μm thulium fiber lasers.
Collapse
Affiliation(s)
- Yafei Meng
- School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210023, China
| | - Yao Li
- School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210023, China
| | - Yongbing Xu
- School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210023, China
| | - Fengqiu Wang
- School of Electronic Science and Engineering and Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing, 210023, China
| |
Collapse
|
39
|
Feng T, Mao D, Cui X, Li M, Song K, Jiang B, Lu H, Quan W. A Filmy Black-Phosphorus Polyimide Saturable Absorber for Q-Switched Operation in an Erbium-Doped Fiber Laser. MATERIALS (BASEL, SWITZERLAND) 2016; 9:E917. [PMID: 28774038 PMCID: PMC5457205 DOI: 10.3390/ma9110917] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/09/2016] [Revised: 11/02/2016] [Accepted: 11/09/2016] [Indexed: 11/16/2022]
Abstract
We demonstrate an erbium-doped fiber laser passively Q-switched by a black-phosphorus polyimide film. The multi-layer black-phosphorus (BP) nanosheets were prepared via a liquid exfoliation approach exploiting N-methylpyrrolidone as the dispersion liquid. By mixing the BP nanosheets with polyimide (PI), a piece of BP-PI film was obtained after evaporating the mixture in a petri dish. The BP-PI saturable absorber had a modulation depth of 0.47% and was inserted into an erbium-doped fiber laser to realize passive Q-switched operations. The repetition rate of the Q-switched laser increased from 5.73 kHz to 31.07 kHz when the laser pump was enhanced from 31.78 mW to 231.46 mW. Our results show that PI is an excellent host material to protect BP from oxidation, and the BP-PI film can act as a promising nonlinear optical device for laser applications.
Collapse
Affiliation(s)
- Tianxian Feng
- MOE Key Laboratory of Space Applied Physics and Chemistry, Shaanxi Key Laboratory of Optical Information Technology, School of Science, Northwestern Polytechnical University, Xi'an 710072, China.
| | - Dong Mao
- MOE Key Laboratory of Space Applied Physics and Chemistry, Shaanxi Key Laboratory of Optical Information Technology, School of Science, Northwestern Polytechnical University, Xi'an 710072, China.
| | - Xiaoqi Cui
- MOE Key Laboratory of Space Applied Physics and Chemistry, Shaanxi Key Laboratory of Optical Information Technology, School of Science, Northwestern Polytechnical University, Xi'an 710072, China.
| | - Mingkun Li
- MOE Key Laboratory of Space Applied Physics and Chemistry, Shaanxi Key Laboratory of Optical Information Technology, School of Science, Northwestern Polytechnical University, Xi'an 710072, China.
| | - Kun Song
- MOE Key Laboratory of Space Applied Physics and Chemistry, Shaanxi Key Laboratory of Optical Information Technology, School of Science, Northwestern Polytechnical University, Xi'an 710072, China.
| | - Biqiang Jiang
- MOE Key Laboratory of Space Applied Physics and Chemistry, Shaanxi Key Laboratory of Optical Information Technology, School of Science, Northwestern Polytechnical University, Xi'an 710072, China.
| | - Hua Lu
- MOE Key Laboratory of Space Applied Physics and Chemistry, Shaanxi Key Laboratory of Optical Information Technology, School of Science, Northwestern Polytechnical University, Xi'an 710072, China.
| | - Wangmin Quan
- MOE Key Laboratory of Space Applied Physics and Chemistry, Shaanxi Key Laboratory of Optical Information Technology, School of Science, Northwestern Polytechnical University, Xi'an 710072, China.
| |
Collapse
|
40
|
Zhang H, Li B, Liu J. Gold nanobipyramid Q-switched Nd:LGGG eye-safe laser operating at 1423.4 nm. APPLIED OPTICS 2016; 55:7351-7354. [PMID: 27661373 DOI: 10.1364/ao.55.007351] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
The performance of a laser-diode-pumped passively Q-switched Nd:LGGG laser at 1423.2 nm with gold nanobipyramids (Au-NBPs) as a saturable absorber was demonstrated. An average output power of 125 mW was obtained at a pump power of 12.2 W, corresponding to an optical-to-optical conversion efficiency of 1.36% and a slope efficiency of 1.78%. A minimum pulse width of 514 ns at a pulse repetition rate of 98.6 kHz was obtained at a pump power of 12.2 W. To the best of our knowledge, this is the first report focusing on the application of Au-NBPs as a saturable absorber for pulse laser operation in the eye-safe region.
Collapse
|
41
|
Wang Y, Liu S, Yuan J, Wang P, Chen J, Li J, Xiao S, Bao Q, Gao Y, He J. Ultra-broadband Nonlinear Saturable Absorption for Two-dimensional Bi2TexSe3-x Nanosheets. Sci Rep 2016; 6:33070. [PMID: 27609149 PMCID: PMC5016803 DOI: 10.1038/srep33070] [Citation(s) in RCA: 46] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/05/2016] [Accepted: 08/19/2016] [Indexed: 12/02/2022] Open
Abstract
We report the ultra-broadband nonlinear optical (NLO) response of Bi2TexSe3−x nanosheets produced by a facile solvothermal method. Our result show that the extracted basic optical nonlinearity parameters of Bi2TexSe3−x nanosheets, αNL, Imχ(3), and FOM reach ~104 cm/GW, ~10−8 esu and ~10−13 esu cm, respectively, which are several orders of magnitude larger than those of bulk dielectrics. We further observed the excitation intensity dependence of the NLO absorption coefficient and the NLO response sensitivity. The mechanisms of those phenomena were proposed based on physical model. The wavelength dependence of the NLO response of Bi2TexSe3−x nanosheets was investigated, and we determined that the Bi2TexSe3−x nanosheets possess an ultra-broadband nonlinear saturable absorption property covering a range from the visible to the near-infrared band, with the NLO absorption insensitive to the excitation wavelength. This work provide fundamental and systematic insight into the NLO response of Bi2TexSe3−x nanosheets and support their application in photonic devices in the future.
Collapse
Affiliation(s)
- Yingwei Wang
- School of Physics and Electronics, Hunan Key Laboratory for Super-micro structure and Ultrafast Process, Central South University, 932 South Lushan Road, Changsha, Hunan 410083, P. R. China
| | - Sheng Liu
- School of Physics and Electronics, Hunan Key Laboratory for Super-micro structure and Ultrafast Process, Central South University, 932 South Lushan Road, Changsha, Hunan 410083, P. R. China
| | - Jian Yuan
- Institute of Functional Nano and Soft Materials (FUNSOM), Jiangsu Key Laboratory for Carbon-Based Functional Materials and Devices, and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou 215123, P. R. China
| | - Peng Wang
- School of Physics and Electronics, Hunan Key Laboratory for Super-micro structure and Ultrafast Process, Central South University, 932 South Lushan Road, Changsha, Hunan 410083, P. R. China
| | - Jiazhang Chen
- School of Physics and Electronics, Hunan Key Laboratory for Super-micro structure and Ultrafast Process, Central South University, 932 South Lushan Road, Changsha, Hunan 410083, P. R. China
| | - Jianbo Li
- Institute of Mathematics and Physics, Central South University of Forestry and Technology, Changsha 410004, China
| | - Si Xiao
- School of Physics and Electronics, Hunan Key Laboratory for Super-micro structure and Ultrafast Process, Central South University, 932 South Lushan Road, Changsha, Hunan 410083, P. R. China
| | - Qiaoliang Bao
- Institute of Functional Nano and Soft Materials (FUNSOM), Jiangsu Key Laboratory for Carbon-Based Functional Materials and Devices, and Collaborative Innovation Center of Suzhou Nano Science and Technology, Soochow University, Suzhou 215123, P. R. China
| | - Yongli Gao
- School of Physics and Electronics, Hunan Key Laboratory for Super-micro structure and Ultrafast Process, Central South University, 932 South Lushan Road, Changsha, Hunan 410083, P. R. China.,Department of Physics and Astronomy, University of Rochester, Rochester, NewYork 14627, United States
| | - Jun He
- School of Physics and Electronics, Hunan Key Laboratory for Super-micro structure and Ultrafast Process, Central South University, 932 South Lushan Road, Changsha, Hunan 410083, P. R. China
| |
Collapse
|
42
|
Sotor J, Pawliszewska M, Sobon G, Kaczmarek P, Przewolka A, Pasternak I, Cajzl J, Peterka P, Honzátko P, Kašík I, Strupinski W, Abramski K. All-fiber Ho-doped mode-locked oscillator based on a graphene saturable absorber. OPTICS LETTERS 2016; 41:2592-2595. [PMID: 27244422 DOI: 10.1364/ol.41.002592] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
In this Letter, we demonstrate a graphene mode-locked, all-fiber Ho-doped fiber laser generating 1.3 nJ energy pulses directly from the oscillator. The graphene used as a saturable absorber was obtained via chemical vapor deposition on copper substrate and immersed in a poly(methyl methacrylate) support. The laser generated ultrashort soliton pulses at 2080 nm with bandwidth up to 6.1 nm. The influence of the output coupling ratio and the SA modulation depth on the mode-locking performance was also investigated.
Collapse
|
43
|
Koo J, Park J, Lee J, Jhon YM, Lee JH. Femtosecond harmonic mode-locking of a fiber laser at 3.27 GHz using a bulk-like, MoSe 2-based saturable absorber. OPTICS EXPRESS 2016; 24:10575-10589. [PMID: 27409880 DOI: 10.1364/oe.24.010575] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
We experimentally demonstrate the use of a bulk-like, MoSe2-based saturable absorber (SA) as a passive harmonic mode-locker for the production of femtosecond pulses from a fiber laser at a repetition rate of 3.27 GHz. By incorporating a bulk-like, MoSe2/PVA-composite-deposited side-polished fiber as an SA within an erbium-doped-fiber-ring cavity, mode-locked pulses with a temporal width of 737 fs to 798 fs can be readily obtained at various harmonic frequencies. The fundamental resonance frequency and the maximum harmonic-resonance frequency are 15.38 MHz and 3.27 GHz (212th harmonic), respectively. The temporal and spectral characteristics of the output pulses are systematically investigated as a function of the pump power. The output pulses exhibited Gaussian-temporal shapes irrespective of the harmonic order, and even when their spectra possessed hyperbolic-secant shapes. The saturable absorption and harmonic-mode-locking performance of our prepared SA are compared with those of previously demonstrated SAs that are based on other transition metal dichalcogenides (TMDs). To the best of the authors' knowledge, the repetition rate of 3.27 GHz is the highest frequency that has ever been demonstrated regarding the production of femtosecond pulses from a fiber laser that is based on SA-induced passive harmonic mode-locking.
Collapse
|
44
|
Zhang H, Liu J. Gold nanobipyramids as saturable absorbers for passively Q-switched laser generation in the 1.1 μm region. OPTICS LETTERS 2016; 41:1150-1152. [PMID: 26977656 DOI: 10.1364/ol.41.001150] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
We demonstrated that gold nanobipyramids (Au-NBPs) can be used as saturable absorbers for ultrafast pulsed-laser application, for the first time. Au-NBPs are prepared through a seed-mediated growth method, and performance is investigated in a passively Q-switched Nd:YVO4 laser. In the Q-switched operation the maximum average output power that can be achieved is 151 mW. The minimum pulse width is 396 ns at a pulse repetition rate of 90.6 kHz.
Collapse
|
45
|
Liu W, Pang L, Han H, Tian W, Chen H, Lei M, Yan P, Wei Z. 70-fs mode-locked erbium-doped fiber laser with topological insulator. Sci Rep 2016; 6:19997. [PMID: 26813439 PMCID: PMC4728691 DOI: 10.1038/srep19997] [Citation(s) in RCA: 98] [Impact Index Per Article: 12.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/05/2015] [Accepted: 12/22/2015] [Indexed: 11/09/2022] Open
Abstract
Femtosecond optical pulses have applications in optical communication, astronomical frequency combs, and laser spectroscopy. Here, a hybrid mode-locked erbium-doped fiber (EDF) laser with topological insulator (TI) is proposed, for the first time to our best knowledge. The pulsed laser deposition (PLD) method is employed to fabricate the fiber-taper TI saturable absorber (TISA). By virtue of the fiber-taper TISA, the hybrid EDF laser is passively mode-locked using the nonlinear polarization evolution (NPE), and emits 70 fs pulses at 1542 nm, whose 3 dB spectral width is 63 nm with a repetition rate and transfer efficiency of 95.4 MHz and 14.12%, respectively. Our experiments indicate that the proposed hybrid mode-locked EDF lasers have better performance to achieve shorter pulses with higher power and lower mode-locking threshold in the future.
Collapse
Affiliation(s)
- Wenjun Liu
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China
- State Key Laboratory of Information Photonics and Optical Communications, School of Science, P. O. Box 91, Beijing University of Posts and Telecommunications, Beijing 100876, China
| | - Lihui Pang
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China
| | - Hainian Han
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China
| | - Wenlong Tian
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China
| | - Hao Chen
- Shenzhen Key Laboratory of Laser Engineering, College of Optoelectronic Engineering, Shenzhen University, ShenZhen, 518060, China
| | - Ming Lei
- State Key Laboratory of Information Photonics and Optical Communications, School of Science, P. O. Box 91, Beijing University of Posts and Telecommunications, Beijing 100876, China
| | - Peiguang Yan
- Shenzhen Key Laboratory of Laser Engineering, College of Optoelectronic Engineering, Shenzhen University, ShenZhen, 518060, China
| | - Zhiyi Wei
- Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190, China
| |
Collapse
|
46
|
Lee J, Lee J, Koo J, Lee JH. Graphite saturable absorber based on the pencil-sketching method for Q-switching of an erbium fiber laser. APPLIED OPTICS 2016; 55:303-309. [PMID: 26835766 DOI: 10.1364/ao.55.000303] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
We experimentally demonstrate a practical and simple method for the preparation of a graphite-based, fiberized saturable absorber (SA). Our SA is prepared by using a low-cost graphite-core pencil that is commercially available from stationary stores to uniformly shade the flat end of a fiber ferrule. The saturable-absorption performance of the prepared SA was experimentally tested, and the feasibility of using the SA as a passive Q-switch was investigated through its incorporation into an erbium-doped-fiber ring cavity. The modulation depth of the SA is ∼1%, and the Q-switched pulses of a 1.98 μs temporal width were readily obtained at a repetition rate of 46.08 kHz.
Collapse
|
47
|
Zhang J, Yin YX, Guo YG. High-Capacity Te Anode Confined in Microporous Carbon for Long-Life Na-Ion Batteries. ACS APPLIED MATERIALS & INTERFACES 2015; 7:27838-27844. [PMID: 26618232 DOI: 10.1021/acsami.5b09181] [Citation(s) in RCA: 31] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Sodium-ion batteries (SIBs) have attracted considerable attention as an alternative energy-storage technology in recent years. Developing advanced sodium storage anode materials with appropriate working potential, high capacity, and good cycling performance is very important. Herein, we demonstrate a nanostructured tellurium@carbon (nano-Te@C) composite by confining nano-Te molecules in the space of carbon micropores as an attractive anode material for SIBs. The nano-Te@C anode presents an appropriate redox potential in the range of 1.05-1.35 V (vs Na(+)/Na), which avoids the Na dendrite problem and achieves a high reversible capacity of 410 mA h g(-1) on the basis of a two-electron redox reaction mechanism. Notably, the nano-Te@C exhibits an admirable long-term cycling stability with a high capacity retention of 90% for 1000 cycles (i.e., ultralow capacity decay of 0.01% per cycle). The excellent electrochemical property of nano-Te@C benefits from the high electroactivity from the nanostructure design and the effective confinement of the microporous carbon host. In addition, a Na-ion full cell by using nano-Te@C as anode and Na2/3Ni1/3Mn2/3O2 as cathode is demonstrated for the first time and exhibits a remarkable capacity retention up to 95% after 150 cycles. The results put new insights for the development of advanced SIBs with long-cycle lifespan.
Collapse
Affiliation(s)
- Juan Zhang
- CAS Key Laboratory of Molecular Nanostructure and Nanotechnology, and Beijing National Laboratory for Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences (CAS) , Beijing 100190, PR China
- University of Chinese Academy of Sciences , Beijing 100049, PR China
| | - Ya-Xia Yin
- CAS Key Laboratory of Molecular Nanostructure and Nanotechnology, and Beijing National Laboratory for Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences (CAS) , Beijing 100190, PR China
| | - Yu-Guo Guo
- CAS Key Laboratory of Molecular Nanostructure and Nanotechnology, and Beijing National Laboratory for Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences (CAS) , Beijing 100190, PR China
- University of Chinese Academy of Sciences , Beijing 100049, PR China
| |
Collapse
|
48
|
Xu JL, Sun YJ, He JL, Wang Y, Zhu ZJ, You ZY, Li JF, Chou MMC, Lee CK, Tu CY. Ultrasensitive nonlinear absorption response of large-size topological insulator and application in low-threshold bulk pulsed lasers. Sci Rep 2015; 5:14856. [PMID: 26442909 PMCID: PMC4595639 DOI: 10.1038/srep14856] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/18/2015] [Accepted: 08/28/2015] [Indexed: 11/13/2022] Open
Abstract
Dirac-like topological insulators have attracted strong interest in optoelectronic application because of their unusual and startling properties. Here we report for the first time that the pure topological insulator Bi2Te3 exhibited a naturally ultrasensitive nonlinear absorption response to photoexcitation. The Bi2Te3 sheets with lateral size up to a few micrometers showed extremely low saturation absorption intensities of only 1.1 W/cm2 at 1.0 and 1.3 μm, respectively. Benefiting from this sensitive response, a Q-switching pulsed laser was achieved in a 1.0 μm Nd:YVO4 laser where the threshold absorbed pump power was only 31 mW. This is the lowest threshold in Q-switched solid-state bulk lasers to the best of our knowledge. A pulse duration of 97 ns was observed with an average power of 26.1 mW. A Q-switched laser at 1.3 μm was also realized with a pulse duration as short as 93 ns. Moreover, the mode locking operation was demonstrated. These results strongly exhibit that Bi2Te3 is a promising optical device for constructing broadband, miniature and integrated high-energy pulsed laser systems with low power consumption. Our work clearly points out a significantly potential avenue for the development of two-dimensional-material-based broadband ultrasensitive photodetector and other optoelectronic devices.
Collapse
Affiliation(s)
- Jin-Long Xu
- Key Laboratory of Optoelectronic Materials Chemistry and Physics of CAS, Fujian Institute of Research on the Structure of Matter, Chinese Academic of Sciences, Fuzhou, 350002 China
| | - Yi-Jian Sun
- Key Laboratory of Optoelectronic Materials Chemistry and Physics of CAS, Fujian Institute of Research on the Structure of Matter, Chinese Academic of Sciences, Fuzhou, 350002 China
| | - Jing-Liang He
- State Key Laboratory of Crystal Materials, Shandong University, Jinan, 250100, China
| | - Yan Wang
- Key Laboratory of Optoelectronic Materials Chemistry and Physics of CAS, Fujian Institute of Research on the Structure of Matter, Chinese Academic of Sciences, Fuzhou, 350002 China
| | - Zhao-Jie Zhu
- Key Laboratory of Optoelectronic Materials Chemistry and Physics of CAS, Fujian Institute of Research on the Structure of Matter, Chinese Academic of Sciences, Fuzhou, 350002 China
| | - Zhen-Yu You
- Key Laboratory of Optoelectronic Materials Chemistry and Physics of CAS, Fujian Institute of Research on the Structure of Matter, Chinese Academic of Sciences, Fuzhou, 350002 China
| | - Jian-Fu Li
- Key Laboratory of Optoelectronic Materials Chemistry and Physics of CAS, Fujian Institute of Research on the Structure of Matter, Chinese Academic of Sciences, Fuzhou, 350002 China
| | - Mitch M C Chou
- Department of Materials and Optoelectronics Science, National Sun Yat-sen University, 70, Lienhei Road, Kaohsiung, Taiwan
| | - Chao-Kuei Lee
- Department of Photonics, National Sun Yat-sen University, 70, Lienhei Road, Kaohsiung, Taiwan
| | - Chao-Yang Tu
- Key Laboratory of Optoelectronic Materials Chemistry and Physics of CAS, Fujian Institute of Research on the Structure of Matter, Chinese Academic of Sciences, Fuzhou, 350002 China
| |
Collapse
|
49
|
Meng Y, Semaan G, Salhi M, Niang A, Guesmi K, Luo ZC, Sanchez F. High power L-band mode-locked fiber laser based on topological insulator saturable absorber. OPTICS EXPRESS 2015; 23:23053-23058. [PMID: 26368409 DOI: 10.1364/oe.23.023053] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
We demonstrate a passive mode-locked Er:Yb doped double-clad fiber laser using a microfiber-based topological insulator (Bi(2)Se(3)) saturable absorber (TISA). By optimizing the cavity loss and output coupling ratio, the mode-locked fiber laser can operate in L-band with high average output power. With the highest pump power of 5 W, 91st harmonic mode locking of soliton bunches with average output power of 308 mW was obtained. This is the first report that the TISA based erbium-doped fiber laser operating above 1.6 μm and is also the highest output power yet reported in TISA based passive mode-locked fiber laser.
Collapse
|
50
|
Sotor J, Sobon G, Kowalczyk M, Macherzynski W, Paletko P, Abramski KM. Ultrafast thulium-doped fiber laser mode locked with black phosphorus. OPTICS LETTERS 2015; 40:3885-3888. [PMID: 26274685 DOI: 10.1364/ol.40.003885] [Citation(s) in RCA: 79] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
We report, for the first time to our knowledge, the usage of black phosphorus (BP) as a saturable absorber for the mode locking of a thulium-doped fiber laser. We have experimentally shown that BP exhibits saturable absorption in the 2 μm wavelength range and supports ultrashort pulse generation. The saturable absorber was based on mechanically exfoliated BP deposited on a fiber connector tip. The laser was capable of generating 739 fs pulses centered at 1910 nm. Our results show that BP might be considered as a universal broadband saturable absorber that could successfully compete with graphene or other low-dimension nanomaterials.
Collapse
|