Diode-pumped triple-clad fiber MOPA with an output power scaling up to 4.67 kW

100 W, tunable in-band thulium fiber amplifier pumped by incoherently combined 1.9 µm fiber lasers

We detail the design and performance of a high efficiency in-band pumped thulium fiber amplifier operating at the 100 W level. Using a novel pumping architecture based on three incoherently combined thulium fiber oscillators at 1904 nm and a seed laser tunable from 1970-1990 nm, efficient amplification is demonstrated in a high dopant concentration 25/65/250 µm thulium fiber. Here we use the 65 µm pedestal surrounding the core as a pump cladding to increase the cladding to core overlap and improve the overall pump absorption. Up to 89% slope efficiency is obtained with ∼100 W output power at 1990 nm. These results indicate that in-band pumping is a viable route to circumvent the thermal limitations associated with 793 nm diode pumping and provide a pathway for development of multi-kW laser sources in the 2 µm spectral window.

High brightness in-band pumped fiber MOPA with output power scaling to >4.6k W

An in-band pumping technique that employs low numerical aperture (NA) and high brightness fiber lasers emitting at 1018 nm enables outstanding power scaling performance by increasing pump power handling capacity of fiber components, reducing thermal load and quantum defect. Here, we present design criteria for an in-band pumped fiber master oscillator power amplifier (MOPA) structure, pumped with 1018 nm fiber lasers, as well as mitigation strategies for nonlinear effects for scalable single-mode laser operation at multi-kilowatt power levels. In addition, we report experimental demonstration of an in-band pumped MOPA with an output power scaling up to 4.63 kW and a slope efficiency of ∼88%. The MOPA system is pumped by 18×264W high brightness fiber lasers operating at 1017.8±0.3n m with an NA of <0.075. The laser emits at 1080.4 nm wavelength with a stimulated Raman scattering suppression of >36.8d B and has a near-diffraction-limited beam quality of M ²∼1.61. To the best of our knowledge, our laser has the highest brightness of 153G W⋅c m ^-2⋅s r ^-1 reported at 1080 nm in co-pumping configuration.

Core opportunities for future optical fibers

Hair-thin strands of glass, intrinsically transparent and strong, of which many millions of kilometers are made annually, connect the world in ways unimaginable 50 years ago. What could another 50 years bring? That question is the theme of this Perspective. The first optical fibers were passive low-loss conduits for light, empowered by sophisticated sources and signal processing; a second advance was the addition of dopants utilizing atomic energy levels to promote amplification, and a third major initiative was physical structuring of the core-clad combinations, using the baseline silica material. Recent results suggest that the next major expansions in fiber performance and devices are likely to utilize different materials in the core, inhomogeneous structures on different length scales, or some combination of these. In particular, fibers with crystalline cores offer an extended transparency range with strong optical nonlinearities and open the door to hybrid opto-electronic devices. Opportunities for future optical fiber that derive from micro- and macro-structuring of the core phase offer some unique possibilities in ‘scattering by design’.

6 kW single mode monolithic fiber laser enabled by effective mitigation of the transverse mode instability

The transverse mode instability (TMI) has been one of the main limitations for the power scaling of single mode fiber lasers. In this work, we report a 6 kW single mode monolithic fiber laser enabled by effective mitigation of the TMI. The fiber laser employs a custom-made wavelength-stabilized 981 nm pump source, which remarkably enhanced the TMI threshold compared with the wavelength of 976 nm. With appropriately distributing bidirectional pump power, the monolithic fiber laser is scaled to 6 kW with single mode beam quality (M²<1.3). The stability is verified in a continuous operation for over 2 hours with power fluctuation below 1%.

Over 10 W linearly polarized supercontinuum directly produced in an erbium-doped fiber MOPA seeded with stretched soliton

We experimentally achieve over 10 W linearly polarized supercontinuum (SC) generation in a polarization-maintaining (PM) erbium-doped fiber (EDF) master oscillator power-amplifier (MOPA). The house-built PM seeding EDF laser can deliver ∼209fs soliton around ∼1563.7nm, which is then stretched to >15ps using a long piece of normal-dispersion fiber. The wideband spectrum of the ultrashort seeding soliton facilitates the further spectral broadening with nonlinear effects. The soliton stretching decelerates the peak power increase, thus facilitating higher amplified average power. After several stages of pre-amplification, the stretched soliton is fed into the main amplifier constructed with PM large mode area fibers. The output average power is finally amplified to ∼11.51W. The corresponding spectrum spans from ∼1450 to ∼2200nm, indicating that SC is formed due to the induced strong nonlinear effects. The polarization extinction ratio at the output reaches over 18 dB. The PM characteristic potentially enhances the system's resistance to environmental disturbances and eliminates instabilities relating to polarization-mode coupling. Our result represents, so far, the highest SC power directly produced in an EDF MOPA, to the best of our knowledge, especially in a linearly polarized manner. This also suggests a scheme for powerful SC generation that employs direct laser diode pumping and duration-managed pulse seeding.