Real-time standoff detection of nitrogen isotopes in ammonia plumes using a swept external cavity quantum cascade laser

Development of a Near-Infrared Photoacoustic System for Selective, Fast, and Fully Automatized Detection of Isotopically Labeled Ammonia

Different environmental and industrial technologies seek for fast and automatic ammonia detection systems, capable of the selective measurement of the concentration of its isotopes at sub-ppm levels, without any interference with the common contaminants. In this work, we report the quasi-simultaneous measurement of ¹⁴NH₃ and ¹⁵NH₃ concentrations based on a near-infrared diode laser-based photoacoustic system. Using a widely tunable external cavity diode laser, four nearby wavelengths within the range of 1531.3–1531.8 nm were optimal circumstances for sensitive detection, while avoiding interference with water vapor. Subsequently, a more robust distributed feedback diode laser was employed to tune the laser wavelength on the sub-second timescale by varying its driving current rather than using much slower temperature tuning. The detection limit of our system is 0.15 and 0.73 ppm for ¹⁴NH₃ and ¹⁵NH₃ (with an accuracy below 0.1%), respectively, and the response time is 3.5 s.

Fugitive methane detection using open-path stand-off chirped laser dispersion spectroscopy

We report an open-path chirped laser dispersion spectrometer capable of detecting the atmospheric methane concentration above the background using both specular and diffusive reflective surfaces via two distinct operation modes in a stand-off detection configuration. The system is integrated with simultaneous ranging functionality, which enables average concentration measurements for varying optical pathlengths. The system was first tested for accuracy and characterized to achieve sensitivity of 2.9ppm-m/Hz^1/2 and pathlength precision of 0.2m/Hz^1/2 with a controlled release of methane outside the laboratory. The instrument was subsequently field-deployed in the proximity of a natural gas compressor station for fugitive methane detection. The instrument successfully detected methane plumes and narrowed down the location of the plume through multi-path measurement. The field measurements were verified by a co-located reference mobile methane sensor.

Standoff Chemical Detection Using Laser Absorption Spectroscopy: A Review

Remote chemical detection in the atmosphere or some specific space has always been of great interest in many applications for environmental protection and safety. Laser absorption spectroscopy (LAS) is a highly desirable technology, benefiting from high measurement sensitivity, improved spectral selectivity or resolution, fast response and capability of good spatial resolution, multi-species and standoff detection with a non-cooperative target. Numerous LAS-based standoff detection techniques have seen rapid development recently and are reviewed herein, including differential absorption LiDAR, tunable laser absorption spectroscopy, laser photoacoustic spectroscopy, dual comb spectroscopy, laser heterodyne radiometry and active coherent laser absorption spectroscopy. An update of the current status of these various methods is presented, covering their principles, system compositions, features, developments and applications for standoff chemical detection over the last decade. In addition, a performance comparison together with the challenges and opportunities analysis is presented that describes the broad LAS-based techniques within the framework of remote sensing research and their directions of development for meeting potential practical use.

In-situ measurement of pyrolysis and combustion gases from biomass burning using swept wavelength external cavity quantum cascade lasers

Broadband high-speed absorption spectroscopy using swept-wavelength external cavity quantum cascade lasers (ECQCLs) is applied to measure multiple pyrolysis and combustion gases in biomass burning experiments. Two broadly-tunable swept-ECQCL systems were used, with the first tuned over a range of 2089-2262 cm^-1 (4.42-4.79 µm) to measure spectra of CO₂, H₂O, and CO. The second was tuned over a range of 920-1150 cm^-1 (8.70-10.9 µm) to measure spectra of ammonia (NH₃), ethene (C₂H₄), and methanol (MeOH). Absorption spectra were measured continuously at a 100 Hz rate throughout the burn process, including inhomogeneous flame regions, and analyzed to determine time-resolved gas concentrations and temperature. The results provide in-situ, dynamic information regarding gas-phase species as they are generated, close to the biomass fuel source.

Standoff chemical plume detection in turbulent atmospheric conditions with a swept-wavelength external cavity quantum cascade laser

Rapid and sensitive standoff measurement techniques are needed for detection of trace chemicals in outdoor plume releases, for example from industrial emissions, unintended chemical leaks or spills, burning of biomass materials, or chemical warfare attacks. Here, we present results from 235 m standoff detection of transient plumes for 5 gas-phase chemicals: Freon 152a (1,1-difluoroethane), Freon 134a (1,1,1,2-tetrafluoroethane), methanol (CH₃OH), nitrous oxide (N₂O), and ammonia (NH₃). A swept-wavelength external cavity quantum cascade laser (ECQCL) measures infrared absorption spectra over the range 955-1195 cm^-1 (8.37- 10.47 µm), from which chemical concentrations are determined via spectral fits. The fast 400 Hz scan rate of the swept-ECQCL enables measurement above the turbulence time-scales, reducing noise and allowing plume fluctuations to be measured. For high-speed plume detection, noise-equivalent column densities of 1-2 ppm*m are demonstrated with 2.5 ms time resolution, improving to 100-400 ppb*m with 100 ms averaging.