Crystal structure of a novel N-substituted L-amino acid dioxygenase from Burkholderia ambifaria AMMD

Directed Evolution of an Iron(II)- and α-Ketoglutarate-Dependent Dioxygenase for Site-Selective Azidation of Unactivated Aliphatic C-H Bonds

FeII - and α-ketoglutarate-dependent halogenases and oxygenases can catalyze site-selective functionalization of C-H bonds via a variety of C-X bond forming reactions, but achieving high chemoselectivity for functionalization using non-native functional groups remains rare. The current study shows that directed evolution can be used to engineer variants of the dioxygenase SadX that address this challenge. Site-selective azidation of succinylated amino acids and a succinylated amine was achieved as a result of mutations throughout the SadX structure. The installed azide group was reduced to a primary amine, and the succinyl group required for azidation was enzymatically cleaved to provide the corresponding amine. These results provide a promising starting point for evolving additional SadX variants with activity on structurally distinct substrates and for enabling enzymatic C-H functionalization with other non-native functional groups.

Non-Native Anionic Ligand Binding and Reactivity in Engineered Variants of the Fe(II)- and α-Ketoglutarate-Dependent Oxygenase, SadA

Mononuclear non-heme Fe(II)- and α-ketoglutarate-dependent oxygenases (FeDOs) catalyze a site-selective C-H hydroxylation. Variants of these enzymes in which a conserved Asp/Glu residue in the Fe(II)-binding facial triad is replaced by Ala/Gly can, in some cases, bind various anionic ligands and catalyze non-native chlorination and bromination reactions. In this study, we explore the binding of different anions to an FeDO facial triad variant, SadX, and the effects of that binding on HO• vs X• rebound. We establish not only that chloride and bromide enable non-native halogenation reactions but also that all anions investigated, including azide, cyanate, formate, and fluoride, significantly accelerate and influence the site selectivity of SadX hydroxylation catalysis. Azide and cyanate also lead to the formation of products resulting from N3•, NCO•, and OCN• rebound. While fluoride rebound is not observed, the rate acceleration provided by this ligand leads us to calculate barriers for HO• and F• rebound from a putative Fe(III)(OH)(F) intermediate. These calculations suggest that the lack of fluorination is due to the relative barriers of the HO• and F• rebound transition states rather than an inaccessible barrier for F• rebound. Together, these results improve our understanding of the FeDO facial triad variant tolerance of different anionic ligands, their ability to promote rebound involving these ligands, and inherent rebound preferences relative to HO• that will aid efforts to develop non-native catalysis using these enzymes.

Properties of the Reactants and Their Interactions within and with the Enzyme Binding Cavity Determine Reaction Selectivities. The Case of Fe(II)/2-Oxoglutarate Dependent Enzymes

Fe(II)/2-oxoglutarate dependent dioxygenases (ODDs) share a double stranded beta helix (DSBH) fold and utilise a common reactive intermediate, ferryl species, to catalyse oxidative transformations of substrates. Despite the structural similarities, ODDs accept a variety of substrates and facilitate a wide range of reactions, that is hydroxylations, desaturations, (oxa)cyclisations and ring rearrangements. In this review we present and discuss the factors contributing to the observed (regio)selectivities of ODDs. They span from inherent properties of the reactants, that is, substrate molecule and iron cofactor, to the interactions between the substrate and the enzyme's binding cavity; the latter can counterbalance the effect of the former. Based on results of both experimental and computational studies dedicated to ODDs, we also line out the properties of the reactants which promote reaction outcomes other than the "default" hydroxylation. It turns out that the reaction selectivity depends on a delicate balance of interactions between the components of the investigated system.

Cofactor Generation Cascade for α-Ketoglutarate and Fe(II)-Dependent Dioxygenases

Fe(II)- and α-ketoglutarate dependent dioxygenases have emerged as important catalysts for the preparation of non-natural amino acids. The stoichiometric supply of the cosubstrate α-ketoglutarate (αKG) is an important cost factor. A combination of the N-succinyl amino acid hydroxylase SadA with an l-glutamate oxidase (LGOX) allowed for coupling in situ production of αKG to stereoselective αKG-dependent dioxygenases in a one-pot/two-step cascade reaction. Both enzymes were used as immobilized enzymes and tested in a preparative scale setup under process-near conditions. Oxygen supply, enzyme, and substrate loading of the oxidation of glutamate were investigated under controlled reaction conditions on a small scale before upscaling to a 1 L stirred tank reactor. LGOX was applied with a substrate concentration of 73.6 g/L (339 mM) and reached a space-time yield of 14.2 g/L/h. Additionally, the enzyme was recycled up to 3 times. The hydroxylase SadA reached a space-time yield of 1.2 g/L/h at a product concentration of 9.3 g/L (40 mM). For both cascade reactions, the supply with oxygen was identified as a critical parameter. The results underline the robustness and suitability of α-ketoglutarate dependent dioxygenases for application outside of living cells.

Industrial Application of 2-Oxoglutarate-Dependent Oxygenases

C–H functionalization is a chemically challenging but highly desirable transformation. 2-oxoglutarate-dependent oxygenases (2OGXs) are remarkably versatile biocatalysts for the activation of C–H bonds. In nature, they have been shown to accept both small and large molecules carrying out a plethora of reactions, including hydroxylations, demethylations, ring formations, rearrangements, desaturations, and halogenations, making them promising candidates for industrial manufacture. In this review, we describe the current status of 2OGX use in biocatalytic applications concentrating on 2OGX-catalyzed oxyfunctionalization of amino acids and synthesis of antibiotics. Looking forward, continued bioinformatic sourcing will help identify additional, practical useful members of this intriguing enzyme family, while enzyme engineering will pave the way to enhance 2OGX reactivity for non-native substrates.

Recent examples of α-ketoglutarate-dependent mononuclear non-haem iron enzymes in natural product biosyntheses

Covering: up to 2018 α-Ketoglutarate (αKG, also known as 2-oxoglutarate)-dependent mononuclear non-haem iron (αKG-NHFe) enzymes catalyze a wide range of biochemical reactions, including hydroxylation, ring fragmentation, C-C bond cleavage, epimerization, desaturation, endoperoxidation and heterocycle formation. These enzymes utilize iron(ii) as the metallo-cofactor and αKG as the co-substrate. Herein, we summarize several novel αKG-NHFe enzymes involved in natural product biosyntheses discovered in recent years, including halogenation reactions, amino acid modifications and tailoring reactions in the biosynthesis of terpenes, lipids, fatty acids and phosphonates. We also conducted a survey of the currently available structures of αKG-NHFe enzymes, in which αKG binds to the metallo-centre bidentately through either a proximal- or distal-type binding mode. Future structure-function and structure-reactivity relationship investigations will provide crucial information regarding how activities in this large class of enzymes have been fine-tuned in nature.

Biochemical analysis and the preliminary crystallographic characterization of D-tagatose 3-epimerase from Rhodobacter sphaeroides

Background

d-Tagatose 3-epimerase epimerizes d-fructose to yield d-psicose, which is a rare sugar that exists in small quantities in nature and is difficult to synthesize chemically. We aim to explore potential industrial biocatalysts for commercial-scale manufacture of this rare sugar. A d-tagatose 3-epimerase from Rhodobacter sphaeroides (RsDTE) has recently been identified as a d-tagatose 3-epimerase that can epimerize d-fructose to yield d-psicose with a high conversion rate.

Results

The purified RsDTE by Ni-affinity chromatography, ionic exchange chromatography and gel filtration forms a tetramer in solution. The maximal activity was in Tris–HCl buffer pH 8.5, and the optimal temperature was at 35 °C. The product, d-psicose, was confirmed using HPLC and NMR. Crystals of RsDTE were obtained using crystal kits and further refined under crystallization conditions such as 10% PEG 8000,0.1 M HEPES pH 7.5, and 8% ethylene glycol at 20 °C using the sitting-drop vapor diffusion method. The RsDTE homology model showed that it possessed the characteristic TIM-barrel fold. Four residues, Glu156, Asp189, Gln215 and Glu250, forms a hydrogen bond network with the active Mn(II) for the hydride transfer reaction. These residues may constitute the catalytic tetrad of RsDTE. The residues around O1, O2 and O3 of the substrates were conserved. However, the binding-site residues are different at O4, O5 and O6. Arg118 formed the unique hydrogen bond with O4 of d-fructose which indicates RsDTE’s preference of d-fructose more than any other family enzymes.

Conclusions

RsDTE possesses a different metal-binding site. Arg118, forming unique hydrogen bond with O4 of d-fructose, regulates the substrate recognition. The research on d-tagatose 3-epimerase or d-psicose 3-epimerase enzymes attracts enormous commercial interest and would be widely used for rare sugar production in the future.

Electronic supplementary material

The online version of this article (10.1186/s12934-017-0808-4) contains supplementary material, which is available to authorized users.

Laminarinase from Flavobacterium sp. reveals the structural basis of thermostability and substrate specificity

Laminarinase from Flavobacterium sp. strain UMI-01, a new member of the glycosyl hydrolase 16 family of a marine bacterium associated with seaweeds, mainly degrades β-1,3-glucosyl linkages of β-glucan (such as laminarin) through the hydrolysis of glycosidic bonds. We determined the crystal structure of ULam111 at 1.60-Å resolution to understand the structural basis for its thermostability and substrate specificity. A calcium-binding motif located on the opposite side of the β-sheet from catalytic cleft increased its degrading activity and thermostability. The disulfide bridge Cys31-Cys34, located on the β2-β3 loop near the substrate-binding site, is responsible for the thermostability of ULam111. The substrates of β-1,3-linked laminarin and β-1,3-1,4-linked glucan bound to the catalytic cleft in a completely different mode at subsite -3. Asn33 and Trp113, together with Phe212, formed hydrogen bonds with preferred substrates to degrade β-1,3-linked laminarin based on the structural comparisons. Our structural information provides new insights concerning thermostability and substrate recognition that will enable the design of industrial biocatalysts.

Structure-Guided Reprogramming of a Hydroxylase To Halogenate Its Small Molecule Substrate

Enzymatic installation of chlorine/bromine into unactivated carbon centers provides a versatile, selective, and environmentally friendly alternative to chemical halogenation. Iron(II) and 2-(oxo)-glutarate (Fe^II/2OG)-dependent halogenases are powerful biocatalysts that are capable of cleaving aliphatic C-H bonds to introduce useful functional groups, including halogens. Using the structure of the Fe/2OG halogenase, WelO5, in complex with its small molecule substrate, we identified a similar N-acyl amino acid hydroxylase, SadA, and reprogrammed it to halogenate its substrate, thereby generating a new chiral haloalkyl center. The work highlights the potential of Fe^II/2OG enzymes as platforms for development of novel stereospecific catalysts for late-stage C-H functionalization.

Structural analysis of enzymes used for bioindustry and bioremediation

Microbial enzymes have been widely applied in the large-scale, bioindustrial manufacture of food products and pharmaceuticals due to their high substrate specificity and stereoselectivity, and their effectiveness under mild conditions with low environmental burden. At the same time, bioremedial techniques using microbial enzymes have been developed to solve the problem of industrial waste, particularly with respect to persistent chemicals and toxic substances. And finally, structural studies of these enzymes have revealed the mechanistic basis of enzymatic reactions, including the stereoselectivity and binding specificity of substrates and cofactors. The obtained structural insights are useful not only to deepen our understanding of enzymes with potential bioindustrial and/or bioremedial application, but also for the functional improvement of enzymes through rational protein engineering. This review shows the structural bases for various types of enzymatic reactions, including the substrate specificity accompanying cofactor-controlled and kinetic mechanisms.

Structural optimization of SadA, an Fe(II)- and α-ketoglutarate-dependent dioxygenase targeting biocatalytic synthesis of N-succinyl-L-threo-3,4-dimethoxyphenylserine

L-threo-3,4-Dihydroxyphenylserine (l-DOPS, Droxidopa) is a psychoactive drug and synthetic amino acid precursor that acts as a prodrug to the neurotransmitters. SadA, a dioxygenase from Burkholderia ambifaria AMMD, is an Fe(II)- and α-ketoglutarate (KG)-dependent enzyme that catalyzes N-substituted branched-chain or aromatic l-amino acids. SadA is able to produce N-succinyl-l-threo-3,4-dimethoxyphenylserine (NSDOPS), which is a precursor of l-DOPS, by catalyzing the hydroxylation of N-succinyl-3,4-dimethoxyphenylalanine (NSDOPA). However, the catalytic activity of SadA toward NSDOPS is much lower than that toward N-succinyl branched-chain l-amino acids. Here, we report an improved biocatalytic synthesis of NSDOPS with SadA. Structure-based protein engineering was applied to improve the α-KG turnover activity for the synthesis of NSDOPS. The G79A, G79A/F261W or G79A/F261R mutant showed a more than 6-fold increase in activity compared to that of the wild-type enzyme. The results provide a new insight into the substrate specificity toward NSDOPA and will be useful for the rational design of SadA mutants as a target of industrial biocatalysts.

Characteristics and biotechnology applications of aliphatic amino acid hydroxylases belonging to the Fe(II)/α-ketoglutarate-dependent dioxygenase superfamily

The asymmetric hydroxylation of inactive carbon atoms is still an important reaction in the industrial synthesis of valuable chiral compounds such as pharmaceuticals and fine chemicals. Applications of monooxygenation enzymes, like cytochrome P450 monooxygenases, flavin-containing monooxygenases, and Fe(II)/α-ketoglutarate-dependent dioxygenases (Fe/αKG-DOs), are strongly desired as hydroxylation biocatalysts because they have great advantages in regio- and stereoselectivity of the reactions. Recently, several novel Fe/αKG-DOs have been found to catalyze the asymmetric hydroxylation of aliphatic amino acids. Depending on their amino acid sequences, these Fe/αKG-DOs catalyze different types of regioselective hydroxylations, or C3-, C4-, and C5-hydroxylation. Additionally, most also have stereoselective sulfoxidation activities. Here, we have reviewed the characterization and process development of this novel functioning group of Fe/αKG-DOs.