Effect of formulation variables on preparation of celecoxib loaded polylactide-co-glycolide nanoparticles

Prodigiosin/celecoxib-loaded into zein/sodium caseinate nanoparticles as a potential therapy for triple negative breast cancer

Nowadays, breast cancer is considered one of the most upsetting malignancies among females. Encapsulation of celecoxib (CXB) and prodigiosin (PDG) into zein/sodium caseinate nanoparticles (NPs) produce homogenous and spherical nanoparticles with good encapsulation efficiencies (EE %) and bioavailability. In vitro cytotoxicity study conducted on human breast cancer MDA-MB-231 cell lines revealed that there was a significant decline in the IC50 for encapsulated drugs when compared to each drug alone or their free combination. In addition, results demonstrated that there is a synergism between CXB and PDG as their combination indices were 0.62251 and 0.15493, respectively. Moreover, results of scratch wound healing assay revealed enhanced antimigratory effect of free drugs and fabricated NPs in comparison to untreated cells. Furthermore, In vitro results manifested that formulated nanoparticles exhibited induction of apoptosis associated with reduced angiogenesis, proliferation, and inflammation. In conclusion, nanoencapsulation of multiple drugs into nanoparticles might be a promising approach to develop new therapies for the managing of triple negative breast cancer.

Integrating Artificial Intelligence with Quality by Design in the Formulation of Lecithin/Chitosan Nanoparticles of a Poorly Water-Soluble Drug

The aim of the current study is to explore the potential of artificial intelligence (AI) when integrated with Quality by Design (QbD) approach in the formulation of a poorly water-soluble drug, for its potential use in carcinoma. Silymarin is used as a model drug for its potential effectiveness in liver cancer. A detailed QbD approach was applied. The effect of the critical process parameters was studied on each of the particle size, size distribution, and entrapment efficiency. Response surface designs were applied in the screening and optimization of lecithin/chitosan nanoparticles, to obtain an optimized formula. The release rate was tested, where artificial neural network models were used to predict the % release of the drug from the optimized formula at different time intervals. The optimized formula was tested for its cytotoxicity. A design space was established, with an optimized formula having a molar ratio of 18.33:1 lecithin:chitosan and 38.35 mg silymarin. This resulted in nanoparticles with a size of 161 nm, a polydispersity index of 0.2, and an entrapment efficiency of 97%. The optimized formula showed a zeta potential of +38 mV, with well-developed spherical particles. AI successfully showed high prediction ability of the drug's release rate. The optimized formula showed an enhancement in the cytotoxic effect of silymarin with a decreased IC50 compared to standard silymarin. Lecithin/chitosan nanoparticles were successfully formulated, with deep process and product understanding. Several tools were used as AI which could shift pharmaceutical formulations from experience-dependent studies to data-driven methodologies in the future.

Pharmatherapeutic Treatment of Osteoarthrosis-Does the Pill against Already Exist? A Narrative Review

The aim of this narrative review is to summarize the current pharmacotherapeutic treatment options for osteoarthritis (OA). Is therapy still mainly symptomatic or does the pill against arthrosis already exist? Causal and non-causal, as well as future therapeutic approaches, are discussed. Various surgical and non-surgical treatment options are available that can help manage symptoms, slow down progression, and improve quality of life. To date, however, therapy is still mainly symptomatic, often using painkilling and anti-inflammatory drugs until the final stage, which is usually joint replacement. These "symptomatic pills against" have side effects and do not alter the progression of OA, which is caused by an imbalance between degenerative and regenerative processes. Next to resolving mechanical issues, the goal must be to gain a better understanding of the cellular and molecular basis of OA. Recently, there has been a lot of interest in cartilage-regenerative medicine and in the current style of treating rheumatoid arthritis, where drug therapy ("the pill against") has been established to slow down or even stop the progression of rheumatoid arthritis and has banned the vast majority of former almost regular severe joint destructions. However, the "causal pill against" OA does not exist so far. First, the early detection of osteoarthritis by means of biomarkers and imaging should therefore gain more focus. Second, future therapeutic approaches have to identify innovative therapeutic approaches influencing inflammatory and metabolic processes. Several pharmacologic, genetic, and even epigenetic attempts are promising, but none have clinically improved causal therapy so far, unfortunately.

Fabrication of Celecoxib PVP Microparticles Stabilized by Gelucire 48/16 via Electrospraying for Enhanced Anti-Inflammatory Action

Electrospraying (ES) technology is considered an efficient micro/nanoparticle fabrication technique with controlled dimensions and diverse morphology. Gelurice® 48/16 (GLR) has been employed to stabilize the aqueous dispersion of Celecoxib (CXB) for enhancing its solubility and oral bioavailability. Our formula is composed of CXB loaded in polyvinylpyllodine (PVP) stabilized with GLR to formulate microparticles (MPs) (CXB-GLR-PVP MPs). CXB-GLR-PVP MPs display excellent in vitro properties regarding particle size (548 ± 10.23 nm), zeta potential (−20.21 ± 2.45 mV), and drug loading (DL, 1.98 ± 0.059 mg per 10 mg MPs). CXB-GLR-PVP MPs showed a significant (p < 0.05) higher % cumulative release after ten minutes (50.31 ± 4.36) compared to free CXB (10.63 ± 2.89). CXB exhibited good dispersibility, proved by X-ray diffractometry (XRD), adequate compatibility of all components, confirmed by Fourier-Transform Infrared Spectroscopy (FTIR), and spherical geometry as revealed in scanning electron microscopy (SEM). Concerning our anti-inflammatory study, there was a significant decrease in the scores of the inflammatory markers’ immunostaining in the CXB-GLR-PVP MPs treated group. Also, the amounts of the oxidative stress biomarkers, as well as mRNA expression of interleukins (IL-1β and IL-6), considerably declined (p < 0.05) in CXB-GLR-PVP MPs treated group alongside an enhancement in the histological features was revealed. CXB-GLR-PVP MPs is an up-and-coming delivery system that could be elucidated in future clinical investigations.

Insights into the mapping of green synthesis conditions for ZnO nanoparticles and their toxicokinetics

Research on ZnO nanoparticles (NPs) has broad medical applications. However, the green synthesis of ZnO NPs involves a wide range of properties requiring optimization. ZnO NPs show toxicity at lower doses. This toxicity is a function of NP properties and pharmacokinetics. Moreover, NP toxicity and pharmacokinetics are affected by the species type and age of the animals tested. Physiologically based pharmacokinetic (PBPK) modeling offers a mechanistic platform to scrutinize the colligative effect of the interplay between these factors, which reduces the need for in vivo studies. This review provides a guide to choosing green synthesis conditions that result in minimal toxicity using a mechanistic tool, namely PBPK modeling.

Recent advances in pain management based on nanoparticle technologies

BACKGROUND

Pain is a vital sense that indicates the risk of injury at a particular body part. Successful control of pain is the principal aspect in medical treatment. In recent years, the advances of nanotechnology in pain management have been remarkable. In this review, we focus on literature and published data that reveal various applications of nanotechnology in acute and chronic pain management.

METHODS

The presented content is based on information collected through pain management publications (227 articles up to April 2021) provided by Web of Science, PubMed, Scopus and Google Scholar services.

RESULTS

A comprehensive study of the articles revealed that nanotechnology-based drug delivery has provided acceptable results in pain control, limiting the side effects and increasing the efficacy of analgesic drugs. Besides the ability of nanotechnology to deliver drugs, sophisticated nanosystems have been designed to enhance imaging and diagnostics, which help in rapid diagnosis of diseases and have a significant impact on controlling pain. Furthermore, with the development of various tools, nanotechnology can accurately measure pain and use these measurements to display the efficiency of different interventions.

CONCLUSIONS

Nanotechnology has started a new era in the pain management and many promising results have been achieved in this regard. Nevertheless, there is still no substantial and adequate act of nanotechnology in this field. Therefore, efforts should be directed to broad investigations.

Industrial Scale Manufacturing and Downstream Processing of PLGA-Based Nanomedicines Suitable for Fully Continuous Operation

Despite the efficacy and potential therapeutic benefits that poly(lactic-co-glycolic acid) (PLGA) nanomedicine formulations can offer, challenges related to large-scale processing hamper their clinical and commercial development. Major hurdles for the launch of a polymeric nanocarrier product on the market are batch-to-batch variations and lack of product consistency in scale-up manufacturing. Therefore, a scalable and robust manufacturing technique that allows for the transfer of nanomedicine production from the benchtop to an industrial scale is highly desirable. Downstream processes for purification, concentration, and storage of the nanomedicine formulations are equally indispensable. Here, we develop an inline sonication process for the production of polymeric PLGA nanomedicines at the industrial scale. The process and formulation parameters are optimized to obtain PLGA nanoparticles with a mean diameter of 150 ± 50 nm and a small polydispersity index (PDI < 0.2). Downstream processes based on tangential flow filtration (TFF) technology and lyophilization for the washing, concentration, and storage of formulations are also established and discussed. Using the developed manufacturing and downstream processing technologies, production of two PLGA nanoformulations encasing ritonavir and celecoxib was achieved at 84 g/h rate. As a measure of actual drug content, encapsulation efficiencies of 49.5 ± 3.2% and 80.3 ± 0.9% were achieved for ritonavir and celecoxib, respectively. When operated in-series, inline sonication and TFF can be adapted for fully continuous, industrial-scale processing of PLGA-based nanomedicines.

Green Synthesized Honokiol Transfersomes Relieve the Immunosuppressive and Stem-Like Cell Characteristics of the Aggressive B16F10 Melanoma

BACKGROUND

Honokiol (HK) is a natural bioactive compound with proven antineoplastic properties against melanoma. However, it shows very low bioavailability when administered orally. Alternatively, topical administration may offer a promising route. The objective of the current study was to fabricate HK transfersomes (HKTs) for topical treatment of melanoma. As an ultradeformable carrier system, transfersomes can overcome the physiological barriers to topical treatment of melanoma: the stratum corneum and the anomalous tumor microenvironment. Moreover, the immunomodulatory and stemness-regulation roles of HKTs were the main interest of this study.

METHODS

TFs were prepared using the modified scalable heating method. A three-factor, three-level Box-Behnken design was utilized for the optimization of the process and formulation variables. Intracellular uptake and cytotoxicity of HKTs were evaluated in nonactivated and stromal cell-activated B16F10 melanoma cells to investigate the influence of the complex tumor microenvironment on the efficacy of HK. Finally, ELISA and Western blot were performed to evaluate the expression levels of TGF-β and clusters of differentiation (CD47 and CD133, respectively).

RESULTS

The optimized formula exhibited a mean size of 190 nm, highly negative surface charge, high entrapment efficiency, and sustained release profile. HKTs showed potential to alleviate the immunosuppressive characteristics of B16F10 melanoma in vitro via downregulation of TGF-β signaling. In addition, HKTs reduced expression of the "do not eat me" signal - CD47. Moreover, HKTs possessed additional interesting potential to reduce the expression of the stem-like cell marker CD133. These outcomes were boosted upon combination with metformin, an antihyperglycemic drug recently reported to possess different functions in cancer, while combination with collagenase, an extracellular matrix-depleting enzyme, produced detrimental effects.

CONCLUSION

HKTs represent a promising scalable formulation for treatment of the aggressive B16F10 melanoma, which is jam-packed with immunosuppressive and stem-like cell markers.

Optimization of Novel Naproxen-Loaded Chitosan/Carrageenan Nanocarrier-Based Gel for Topical Delivery: Ex Vivo, Histopathological, and In Vivo Evaluation

Naproxen (NAP) is commonly used for pain, inflammation, and stiffness associated with arthritis. However, systemic administration is linked with several gastrointestinal tract (GIT) side effects. The present work aims to prepare and evaluate NAP nanoparticulate shells of chitosan (CS) and carrageenan (CRG) loaded into a Carbopol 940 (Ca-940) gel system with unique features of sustained drug delivery as well as improved permeation through a topical route. Moreover, this study aims to evaluate its ex vivo, histopathological, and in vivo anti-inflammatory activity in albino Wistar rats. The percentage of ex vivo drug permeation patterns in the optimized formulation (No) was higher (88.66%) than the control gel (36.195%). Oral toxicity studies of developed nanoparticles in albino rabbits showed that the NAP-loaded CS/CRG are non-toxic and, upon histopathological evaluation, no sign of incompatibility was observed compared to the control group. A In Vivo study showed that the optimized gel formulation (No) was more effective than the control gel (Nc) in treating arthritis-associated inflammation. The sustained permeation and the absence of skin irritation make this novel NAP nanoparticle-loaded gel based on CS/CRG a suitable drug delivery system for topical application and has the potential for improved patient compliance and reduced GIT-related side effects in arthritis.

Nanoliposome Precursors for Shape Modulation: Use of Heuristic Algorithm and QBD Principles for Encapsulating Phytochemicals

BACKGROUND

Screening of multiple methods is worthless for formulators due to material losses, wastage of time, and expenditures. It is imperative to make a quick decision.

OBJECTIVE

The present investigation describes the systematic approach to select the best suitable method for the development of nanoliposomes (NL), the precursor of nanocochleates encapsulating curcumin using Analytic Hierarchy Process (AHP).

METHODS

Pair-wise comparison matrices were used to achieve the overall priority weight and ranking for the selection of appropriate technique. Furthermore, Plackett-Burman screening Design (PBD) was exploited to investigate specific effects of associated formulation and process variables on particle size (Y1), drug content (Y2), and entrapment efficiency (Y3), while fabricating NL.

RESULTS

Results revealed the reliability of the pair-wise comparison matrices and selected the ethanol injection method with the highest priority weight (0.337). Bland-Altman plot and control chart validated the results of AHP. The preparation of vesicles with the preferred diameter and size distribution was essentially fulfilled. Stirring speed (X5), amount of phospholipid (X4), and cholesterol (X8) showed significant influence (p<0.05;) on Y1 and Y3, PBD revealed. These factors can be further optimized using the design of experiments.

CONCLUSION

AHP being an effective tool, has assisted in selecting the best alternative for fabricating NL, whilst PBD enabled a clear understanding of the effects of diverse formulation variables on responses studied. Results ensure that NL is a riveting candidate for modulating effectively into tailormade diverse shaped nanoformulations for further in vitro; and in vivo; studies.

Novel Intranasal Drug Delivery: Geraniol Charged Polymeric Mixed Micelles for Targeting Cerebral Insult as a Result of Ischaemia/Reperfusion

Brain damage caused by cerebral ischaemia/reperfusion (I/R) can lead to handicapping. So, the present study aims to evaluate the prophylactic and therapeutic effects of geraniol in the form of intranasal polymeric mixed micelle (PMM) on the central nervous system in cerebral ischaemia/reperfusion (I/R) injury. A 3² factorial design was used to prepare and optimize geraniol PMM to investigate polymer and stabilizer different concentrations on particle size (PS) and percent entrapment efficiency (%EE). F3 possessing the highest desirability value (0.96), with a PS value of 32.46  ±  0.64 nm, EE of 97.85  ±  1.90%, and release efficiency of 59.66  ±  0.64%, was selected for further pharmacological and histopathological studies. In the prophylactic study, animals were classified into a sham-operated group, a positive control group for which I/R was done without treatment, and treated groups that received vehicle (plain micelles), geraniol oil, and geraniol micelles intranasally before and after I/R. In the therapeutic study, treated rats received geraniol oil and micelles after I/R. Evaluation of the effect of geraniol on behavior was done by activity cage and rotarod and the analgesic effect tested by hot plate. Anti-inflammatory activity was assessed by measuring interleukin β6, cyclooxygenase-2, hydrogen peroxide, and inducible nitric oxide synthase. Histopathogical examination of cerebral cortices was also done to confirm the results of a biochemical assay. Geraniol nanostructured polymeric mixed micelles showed an enhanced neuro-protective effect compared to geraniol oil, confirming that PMM via intranasal route could be an efficient approach for delivering geraniol directly to the brain through crossing the blood-brain barrier.

X-Ray Characterization of Pharmaceutical and Cosmetic Lipidic Nanoparticles for Cutaneous Application

Starting from the second half of the 1900s, the advent of nanotechnology in medicine has provoked a profound revolution in this area; at present, nanomedicine delivered a remarkably large set of research and clinically useful tools as diagnostic devices, contrast agents, analytical tools, physical therapy applications, and drugdelivery vehicles. Concerning nanoformulations for drug delivery, they are constituted by nanoparticles with dimensions lower than 1 μm, usually characterized by improved pharmacokinetics, taking advantage of specific targeting, and reduced side effects. The contributors to the present chapter are reviewing a range of papers related to the structural characterization of nanoformulations by X-ray diffraction techniques. The whole of the considered papers underlines the essential role that biophysical techniques have acquired as an essential prerequisite to understanding stability, bioavailability, and lipid, biopolymer, and drug organization in nanoformulations.

Triamcinolone acetonide-loaded PLA/PEG-PDL microparticles for effective intra-articular delivery: synthesis, optimization, in vitro and in vivo evaluation

Nowadays the use of sustainable polymers as poly-lactic acid (PLA) and poly-δ-decalactone (PDL) in drug delivery is advantageous compared to polymers derived from fossil fuels. The present work aimed to produce microparticles (MPs) derived from novel sustainable polymers, loaded with triamcinolone acetonide (TA) for treatment of rheumatoid arthritis via intra-articular (IA) delivery. PDL was synthesized from green δ-decalactone monomers and co-polymerized with methoxy-polyethylene glycol (mPEG) forming PEG-PDL with different molecular weights. The Hansen's solubility parameters were applied to select the most compatible polymer with the drug. An o/w emulsion/solvent evaporation technique was used for MPs fabrication, using 3 [3] full factorial design. Selection of the optimized MPs was performed using Expert Design® software's desirability function. The optimized formulations were characterized using scanning electron microscope, powder X-ray diffraction, differential scanning calorimetry, infrared spectroscopy and in vitro release studies. The inhibition percents of inflammation and histopathological studies were assessed in complete Freund's adjuvant-induced rats' knee joints evaluating the effect of IA injections of selected MPs compared to the free drug suspension. Solubility studies revealed high compatibility and miscibility between TA and PEG-PDL₁₇₀₀, which was blended with PLA for convenient MPs formation. The in vitro characterization studies confirmed the formation of drug-copolymer co-crystals. The in vivo studies ensured the superiority of the newly designed composite MPs in inflammation suppression, compared to the free drug suspension and PLA MPs as well. The present study proved the advantage of using sustainable polymers in a novel combination for effective drug delivery and suggesting its usefulness in designing versatile platforms for therapeutic applications.

Application of statistical design to evaluate critical process parameters and optimize formulation technique of polymeric nanoparticles

In advanced medication, drug-loaded polymeric nanoparticles (NPs) appeared as a novel drug delivery system with lots of advantages over conventional medicines. Despite all the advantages, NPs do not gain popularity for manufacturing hurdles. The study focused on the formulation difficulties and implementation of statistical design to establish an effective model for manufacturing NPs. In this study, physico-chemical properties of the drug and polymer (PLGA) were incorporated to understand the mechanistic insights of nanoformulations. Primarily, the process controlling parameters were screened by Plackett-Burman design and the critical process parameters (Cpp) were further fabricated by Box-Behnken design (BBD). The TLM-PLGA-NPs (telmisartan loaded PLGA NPs) exhibited particle size, encapsulation efficiency and zeta potential of 232.4 nm, 79.21% and -9.92 mV respectively. The NPs represented drug loading of 76.31%. Korsmeyer-Peppas model (R 2 = 0.925) appeared to be the best fitted model for in vitro release kinetics of NPs. The model identified Fickian diffusion of TLM from the polymeric nanoparticles. The ANOVA results of variables indicate that BBD is a suitable model for the development of polymeric NPs. The study successfully identified and evaluated the correlation of significant parameters that were directly or indirectly influencing the formulations which deliberately produce desired nanoparticles with the help of statistical design.

Submicron-Sized Nanocomposite Magnetic-Sensitive Carriers: Controllable Organ Distribution and Biological Effects

Although new drug delivery systems have been intensely developed in the past decade, no significant increase in the efficiency of drug delivery by nanostructure carriers has been achieved. The reasons are the lack of information about acute toxicity, the influence of the submicron size of the carrier and difficulties with the study of biodistribution in vivo. Here we propose, for the first time in vivo, new nanocomposite submicron carriers made of bovine serum albumin (BSA) and tannic acid (TA) and containing magnetite nanoparticles with sufficient content for navigation in a magnetic field gradient on mice. We examined the efficacy of these submicron carriers as a delivery vehicle in combination with magnetite nanoparticles which were systemically administered intravenously. In addition, the systemic toxicity of this carrier for intravenous administration was explicitly studied. The results showed that (BSA/TA) carriers in the given doses were hemocompatible and didn’t cause any adverse effect on the respiratory system, kidney or liver functions. A combination of gradient-magnetic-field controllable biodistribution of submicron carriers with fluorescence tomography/MRI imaging in vivo provides a new opportunity to improve drug delivery efficiency.

Chitosan/alginate nanoparticles as a promising carrier of novel curcumin diethyl diglutarate

Chitosan/alginate nanoparticles (CANPs) were formulated to encapsulate curcumin diethyl diglutarate (CDG) for oral delivery. CDG-loaded CANPs (CDG-CANPs) were prepared by o/w emulsification and ionotropic gelation. The optimization of CDG-CANPs was successfully performed by response surface methodology. The characteristics including photostability, storage stability, digestive stability, in vitro digestibility, bioaccessibility and in vitro uptake in Caco-2 cells of free CDG and CDG-CANPs were investigated. The optimal CDG-CANPs could be prepared by chitosan/alginate mass ratio of 0.065:1, 1% (w/v) Pluronic®F127 and 4.5 mg/mL of CDG. The optimized nanoparticles had the particle size, zeta potential, encapsulation efficiency and loading capacity of 215 nm, -24.1 mV, 85% and 27%, respectively. The CDG-CANPs showed better stability under UV irradiation and thermal exposure compared with free CDG. The CDG-CANPs had stability up to 3 months at 4 °C. The in vitro release profile showed sustained-release manner and best fit with the Korsmeyer-Peppas kinetic model, indicating the Fickian diffusion mechanism. Nanoparticle encapsulation significantly enhanced in vitro digestibility and bioaccessibility under simulated gastrointestinal conditions and cellular uptake of CDG. The overall results suggest that CANPs are promising candidates for encapsulation, protection and controlled release of CDG, a hydrophobic compound, with an improvement of physicochemical stabilities, digestibility, bioaccessibility and cellular uptake.

Formulation and in vivo evaluation of aliskiren-loaded poly(lactic-co-glycolic) acid nanoparticles

Aliskiren (ALS) is a direct renin inhibitor with low bioavailability and high drug cost. The goal of this study was to increase the bioavailability of ALS through nanoformulation. The optimized formulation was then evaluated in spontaneously hypertensive rats (SHRs). We developed an ALS poly(lactic- co-glycolic) acid nanoparticle (ALS-NP) through the emulsion–diffusion–evaporation method with various solvents, stabilizer concentrations, and centrifugation speeds. SHRs were orally dosed with 30 mg/kg ALS or dose equivalent ALS-NP. Several parameters were assayed in plasma and/or urine at baseline and 24 h post-dose, while pharmacokinetic analysis included serial sampling. The optimum formulation was found with ethyl acetate, a 1.00% w/v didodecyldimethylammonium bromide concentration, and a 10,000 r/min (15,554 g) centrifugation speed. A 168% relative bioavailability was observed as a result of ALS-NP administration along with significant, as determined by Student’s t-test, increases in the maximum ALS plasma concentration ( p = 0.0189) and the area under the plasma concentration–time curve from 0 to infinity ( p = 0.0095). Conversely, a reduction was found in oral volume of distribution ( p = 0.0009) and oral clearance ( p = 0.0298). Blood urea nitrogen increased significantly after dosing in both groups ( p < 0.0001 and p < 0.0001); however, no statistical difference was found between endpoint levels ( p > 0.05) following one-way analysis of variance (ANOVA). Kidney injury molecule-1 increased following ALS dosing ( p = 0.0486), while ALS-NP showed a decrease ( p = 0.027) which was also significantly decreased compared to ALS-Final ( p = 0.0008) when examined using two-way ANOVA. Urinary potassium excretion decreased significantly, as shown by two-way ANOVA, only in the ALS group ( p = 0.0274) which was also significantly reduced compared to ALS-NP-Final ( p = 0.016). Using the current formulation and at the dosage tested, ALS-NP showed a more favorable pharmacokinetic profile and positive kidney changes compared to ALS in regard to select outcomes. Thus, NP formulation may further improve ALS renoprotection in addition to increasing bioavailabilty.

Design of ciprofloxacin-loaded nano-and microcomposite particles for dry powder inhaler formulations: preparation, in vitro characterisation, and antimicrobial efficacy

In this study, ciprofloxacin hydrochloride (CIP)-loaded poly-ε-caprolactone (PCL) nanoparticles were prepared for pulmonary administration. CIP-loaded PCL nanoparticles were prepared using solid-in-oil-in-water (s/o/w) emulsion solvent evaporation method, and the effects of various formulation parameters on the physicochemical properties of the nanoparticles were investigated. PCL nanoparticles showed spherical shapes with particle sizes around 143-489 nm. Encapsulation efficiency was found to be very low because of water-solubility properties of CIP. However, the surface modification of nanoparticles with chitosan caused an increase in the encapsulation efficiency of nanoparticles. At drug release study, CIP-loaded PCL nanoparticles showed initial burst effect for 4 h and then continuously released for 72 h. Nanocomposite microparticles containing CIP-loaded PCL nanoparticles were prepared freeze-drying method and mannitol was used as carrier material. Tapped density and MMADt results show that nanocomposite microparticles have suitable aerodynamic properties for pulmonary administration. Antimicrobial efficacy investigations showed that CIP-encapsulated PCL nanoparticles and nanocomposite microparticles inhibited the growth of bacteria. Also, when the antimicrobial activity of the nanoparticles at the beginning and at the sixth month was examined, it was found that the structure of the particulate system was still preserved. These results indicated that nanocomposite microparticles containing CIP-loaded PCL nanoparticles can be used for pulmonary delivery.

Stabilizers influence drug-polymer interactions and physicochemical properties of disulfiram-loaded poly-lactide-co-glycolide nanoparticles

Aim:

Stabilizers are known to be an integral component of polymeric nanostructures. Ideally, they manipulate physicochemical properties of nanoparticles. Based on this hypothesis, we demonstrated that disulfiram (drug) and Poly-lactide-co-glycolide (polymer) interactions and physicochemical properties of their nanoparticles formulations are significantly influenced by the choice of stabilizers.

Methodology:

Electron microscopy, differential scanning calorimetry, x-ray diffraction, Raman spectrum analysis, isothermal titration calorimetry and in silico docking studies were performed.

Results & discussion:

Polysorbate 80 imparted highest crystallinity while Triton-X 100 imparted highest rigidity, possibly influencing drug bioavailability, blood-retention time, cellular uptake and sustained drug release. All the molecular interactions were hydrophobic in nature and entropy driven. Therefore, polymeric nanoparticles may be critically manipulated to streamline the passive targeting of drug-loaded nanoparticles.

Polymeric nanoparticles are futuristic drug-delivering platforms that have many potential advantages above conventional drug-delivery tools. They are mainly composed of a polymer, stabilizer and the therapeutic ingredient. A number of researches are on-going to improvise various characteristics of polymeric nanoparticles, in order to enhance its efficacy. The current study is one such domain where we emphasize on identifying potential stabilizing factors that are involved in nanoparticles formation and their drug entrapment and release properties.

Loratadine bioavailability via buccal transferosomal gel: formulation, statistical optimization, in vitro/in vivo characterization, and pharmacokinetics in human volunteers

Loratadine (LTD) is an antihistaminic drug that suffers limited solubility, poor oral bioavailability (owing to extensive first-pass metabolism), and highly variable oral absorption. This study was undertaken to develop and statistically optimize transfersomal gel for transbuccal delivery of LTD. Transfersomes bearing LTD were prepared by conventional thin film hydration method and optimized using sequential Quality-by-Design approach that involved Placket-Burman design for screening followed by constrained simplex-centroid design for optimization of a Tween-80/Span-60/Span-80 mixture. The transferosomes were characterized for entrapment efficiency, particle size, and shape. Optimized transferosomes were incorporated in a mucoadhesive gel. The gel was characterized for rheology, ex vivo permeation across chicken pouch buccal mucosa, in vitro release, and mucoadhesion. Pharmacokinetic behavior of LTD formulations was investigated in healthy volunteers following administration of a single 10-mg dose. Optimal transferosomes characterized by submicron size (380 nm), spherical shape and adequate loading capacity (60%) were obtained by using quasi-equal ratio surfactant mixture. In terms of amount permeated, percentage released, and mucoadhesion time, the transferosomal gel proved superior to control, transferosome-free gel. Bioavailability of the transferosomal gel was comparable to Claritin® oral tablets. However, inter-individual variability in Cmax and AUC was reduced by 76 and 90%, respectively, when the buccal gel was used. Linear Correlation of in vitro release with in vivo buccal absorption fractions was established with excellent correlation coefficient (R2>0.97). In summary, a novel buccal delivery system for LTD was developed. However, further clinical investigation is warranted to evaluate its therapeutic effectiveness and utility.

In situ hybrid nano drug delivery system (IHN-DDS) of antiretroviral drug for simultaneous targeting to multiple viral reservoirs: An in vivo proof of concept

We report In situ hybrid nano drug delivery system (IHN-DDS) of nevirapine (NVP) for simultaneous targeting to multiple viral reservoirs. The IHN-DDS system was comprised of a preconcentrate containing NVP, lipid, and a surfactant which when diluted with water resulted in the formation of nanoparticles of size range varied from 70 to 1100nm. Transmission electron microscopy and small angle neutron scattering studies of pellet and supernatant obtained after centrifugation of the IHN-DDS revealed spherical shaped nanoparticles and assembled structures, respectively. Uniform distribution of the NVP in lipid nanoparticles was confirmed by fourier transform infrared spectroscopy. Biodistribution studies in rats showed significant enhancement of NVP concentration of about 6.1, 5.8 and 3.7 fold in the liver, spleen, and brain, respectively after intravenous administration of IHN-DDS systems compared to plain NVP solution. In conclusion, IHN-DDS systems could be a promising approach for simultaneous multisite targeting and could provide therapeutic benefits in complete eradication of HIV infections.

Ethyl cellulose nanoparticles as a platform to decrease ulcerogenic potential of piroxicam: formulation and in vitro/in vivo evaluation

Nanoparticles (NPs) have long gained significant interest for their use in various drug formulations in order to increase bioavailability, prolong drug release, and decrease side effects of highly toxic drugs. The objective of this investigation was to evaluate the potential of ethyl cellulose-based NPs (EC-NPs) to modulate the release and reduce ulcerogenicity of piroxicam (PX) after oral administration. PX-loaded EC-NPs were prepared by solvent evaporation technique using different stabilizers at three concentration levels. Morphological examination of selected formulas confirmed the formation of spherical NPs with slightly porous surface. Formulation containing poloxamer-stabilized EC-NPs (P188/0.2), having a particle size of 240.26±29.24 nm, polydispersity index of 0.562±0.030, entrapment efficiency of 85.29%±1.57%, and modulated release of PX (88% after 12 hours), was selected as the optimum formulation. Differential scanning calorimetry demonstrated the presence of PX in an amorphous form in the NPs. Fourier-transform infrared spectroscopy revealed the possible formation of hydrogen bond and the absence of chemical interaction. In vivo study, evaluation of pharmacokinetic parameters, evaluation of gastric irritation potential, and histological examination were conducted after administration of the selected formulation. Time to reach maximum plasma concentration, t_max, of poloxamer-stabilized EC-NPs was significantly higher than that of Feldene^® 20 mg capsules (P≤0.001). Encapsulation of the acidic, gastric offender PX into NPs managed to significantly suppress gastric ulceration potential in rats (P≤0.05) as compared to that of PX suspension. A reduction of 66% in mean ulcer index was observed. In conclusion, poloxamer-stabilized EC-NPs (P188/0.2) had a significant potential of offsetting deleterious side effects common in PX use.

Lysozyme-loaded lipid-polymer hybrid nanoparticles: preparation, characterization and colloidal stability evaluation

CONTEXT

Lipid-polymer hybrid nanoparticles (LPNPs) are polymeric nanoparticles enveloped by lipid layers, which have emerged as a potent therapeutic nanocarrier alternative to liposomes and polymeric nanoparticles.

OBJECTIVE

The aim of this work was to develop, characterize and evaluate LPNPs to deliver a model protein, lysozyme.

MATERIALS AND METHODS

Lysozyme-loaded LPNPs were prepared by using the modified w/o/w double-emulsion-solvent-evaporation method. Poly-ɛ-caprolactone (PCL) was used as polymeric core material and tripalmitin:lechitin mixture was used to form a lipid shell around the LPNPs. LPNPs were evaluated for particle size distribution, zeta potential, morphology, encapsulation efficiency, in vitro drug release, stability and cytotoxicity.

RESULTS

The DLS measurement results showed that the particle size of LPNPs ranged from 58.04 ± 1.95 nm to 2009.00 ± 0.52 nm. The AFM and TEM images of LPNPs demonstrate that LPNPs are spherical in shape. The protein-loading capacity of LPNPs ranged from 5.81% to 60.32%, depending on the formulation parameters. LPNPs displayed a biphasic drug release pattern with a burst release within 1 h, followed by sustained release afterward. Colloidal stability results of LPNPs in different media showed that particle size and zeta potential values of particles did not change significantly in all media except of FBS 100% for 120 h. Finally, the results of a cellular uptake study showed that LPNPs were significantly taken up by 83.3% in L929 cells.

CONCLUSION

We concluded that the LPNPs prepared with PCL as polymeric core material and tripalmitin:lechitin mixture as lipid shell should be a promising choice for protein delivery.

The potential of protein-nanomaterial interaction for advanced drug delivery

Nanomaterials, like nanoparticles, micelles, nano-sheets, nanotubes and quantum dots, have great potentials in biomedical fields. However, their delivery is highly limited by the formation of protein corona upon interaction with endogenous proteins. This new identity, instead of nanomaterial itself, would be the real substance the organs and cells firstly encounter. Consequently, the behavior of nanomaterials in vivo is uncontrollable and some undesired effects may occur, like rapid clearance from blood stream; risk of capillary blockage; loss of targeting capacity; and potential toxicity. Therefore, protein-nanomaterial interaction is a great challenge for nanomaterial systems and should be inhibited. However, this interaction can also be used to functionalize nanomaterials by forming a selected protein corona. Unlike other decoration using exogenous molecules, nanomaterials functionalized by selected protein corona using endogenous proteins would have greater promise for clinical use. In this review, we aim to provide a comprehensive understanding of protein-nanomaterial interaction. Importantly, a discussion about how to use such interaction is launched and some possible applications of such interaction for advanced drug delivery are presented.