Osteogenic Differentiation and Mineralization on Compact Multilayer nHA-PCL Electrospun Scaffolds in a Perfusion Bioreactor

Mesenchymal stem cells osteogenic differentiation by ZnO nanoparticles and polyurethane bimodal foam nanocomposites

Mesenchymal stem cells with tissue repair capacity involve in regenerative medicine. MSCs can promote bone repair when employed with nano scaffolds/particles. Here, the MTT and Acridine Orange assay enabled the cytotoxic concentration of Zinc oxide nanoparticles and Polyurethane evaluation. Following culturing adipose tissue-derived MSCs, ADSCs' proliferation, growth, and osteogenic differentiation in the presence of PU with and without ZnO NPs is tracked by a series of biological assays, including Alkaline Phosphatase activity, Calcium deposition, alizarin red staining, RT-PCR, scanning electron microscope, and immunohistochemistry. The results showed boosted osteogenic differentiation of ADSCs in the presence of 1% PU scaffold and ZnO NPS and can thus apply as a new bone tissue engineering matrix. The expression level of Osteonectin, Osteocalcin, and Col1 increased in PU-ZnO 1% on the 7th and 14th days. There was an increase in the Runx2 gene expression on the 7th day of differentiation in PU-ZnO 1%, while it decreased on day 14th. In conclusion, Polyurethane nano scaffolds supported the MSCs' growth and rapid osteogenic differentiation. The PU-ZnO helps not only with cellular adhesion and proliferation but also with osteogenic differentiation.

Investigation of osteogenesis and angiogenesis in perfusion bioreactors using improved multi-layer PCL-nHA-nZnO electrospun scaffolds

PURPOSE

Bone tissue engineering aims to create a three-dimensional, matured, angiogenic scaffold with a suitable thickness that resembles a natural bone matrix. On the other hand, electrospun fibers, which researchers have considered due to their good biomimetic properties, are considered 2D structures. Due to the highly interwoven network and small pore size, achieving the desired thickness for bone lesions has always been challenging. In bone tissue engineering, bioreactors are crucial for achieving initial tissue maturity and introducing certain signals as flow parameters for differentiation.

METHODS

In the present study, Human bone marrow mesenchymal stem cells (hBMSCs) and human umbilical vein endothelial cells (HUVECs) were co-cultured in a perfusion bioreactor on treated (improved pore size by gelatin sacrification and subsequent ultrasonication) 5-layer polycaprolactone-nano hydroxyapatite-nano zinc oxide (T-PHZ) scaffolds to investigate osteogenesis and angiogenesis simultaneously. The flow parameters and stresses on the cells were studied using two patterns of parallel and vertical scaffolds relative to the flow of the culture medium. In dynamic vertical flow (DVF), the culture medium flows perpendicular to the scaffolds, and in dynamic parallel flow (DPF), the culture medium flows parallel to the scaffolds. In all evaluations, static samples (S) served as the control group.

RESULTS

Live/dead, and MTT assays demonstrated the biocompatibility of the 5-layer scaffolds and the suitability of the bioreactor's functional conditions. ALP activity, EDAX analysis, and calcium content measurements exhibited greater osteogenesis for T-PHZ scaffolds in DVF conditions. Calcium content increased by a factor of 2.2, 1.8, and 1.6 during days 7 to 14 of culture under DVF, DPF and S conditions, respectively. After 21 days of co-culturing, an immunohistochemistry (IHC) test was performed to investigate angiogenesis and osteogenesis. Five antibodies were investigated in DVF, CD31, VEGFA, and VEGFR2 for angiogenesis, osteocalcin, and RUNX2 for osteogenesis. Compressive stress applied in DVF mode has increased osteogenic activity compared to DPF.

CONCLUSION

The results indicated the development of ideal systems for osteogenesis and angiogenesis on the treated multilayer electrospun scaffolds in the perfusion bioreactor.

3D bioprinting of prevascularised implants for the repair of critically-sized bone defects

For 3D bioprinted tissues to be scaled-up to clinically relevant sizes, effective prevascularisation strategies are required to provide the necessary nutrients for normal metabolism and to remove associated waste by-products. The aim of this study was to develop a bioprinting strategy to engineer prevascularised tissues in vitro and to investigate the capacity of such constructs to enhance the vascularisation and regeneration of large bone defects in vivo. From a screen of different bioinks, a fibrin-based hydrogel was found to best support human umbilical vein endothelial cell (HUVEC) sprouting and the establishment of a microvessel network. When this bioink was combined with HUVECs and supporting human bone marrow stem/stromal cells (hBMSCs), these microvessel networks persisted in vitro. Furthermore, only bioprinted tissues containing both HUVECs and hBMSCs, that were first allowed to mature in vitro, supported robust blood vessel development in vivo. To assess the therapeutic utility of this bioprinting strategy, these bioinks were used to prevascularise 3D printed polycaprolactone (PCL) scaffolds, which were subsequently implanted into critically-sized femoral bone defects in rats. Micro-computed tomography (µCT) angiography revealed increased levels of vascularisation in vivo, which correlated with higher levels of new bone formation. Such prevascularised constructs could be used to enhance the vascularisation of a range of large tissue defects, forming the basis of multiple new bioprinted therapeutics. STATEMENT OF SIGNIFICANCE: This paper demonstrates a versatile 3D bioprinting technique to improve the vascularisation of tissue engineered constructs and further demonstrates how this method can be incorporated into a bone tissue engineering strategy to improve vascularisation in a rat femoral defect model.

Osteogenic induction of human mesenchymal stem cells in multilayered electrospun scaffolds at different flow rates and configurations in a perfusion bioreactor

Electrospun scaffolds are potentially interesting in bone tissue engineering due to a strong structural similarity to the natural bone matrix. To investigate the osteogenic behavior of cells on the scaffolds, dynamic culture of cells is essential to simulate the biological environment. In the present study, human mesenchymal stem cells (hMSCs) were cultured on multilayer nanohydroxyapatite-polycaprolactone electrospun scaffolds at different configurations (horizontal with or without pressure and parallel with the medium flow) and flow rates in a perfusion bioreactor. Alkaline phosphatase (ALP) activity, cell viability, Ca deposition and RUNX2 expression were determined in three different dynamic states, and compared with static culture after 1, 3, 7, and 14 days. Among dynamic groups, RUNX2 gene expression upregulated more in a horizontal state at a low flow rate without mechanical pressure (LF) and parallel flow (PF), than static group on day 7. At a high flow rate with mechanical pressure, Ca deposition and ALP activity increased 2.34 and 1.7 folds more than in static culture over 7 days, respectively. Furthermore, ALP activity, Ca deposition and RUNX2 gene expression increased in PF samples. PF provided longer culture time with higher cell differentiation. Therefore, high flow rate with mechanical pressure and PF are suggested for producing differentiated cell structure for bone tissue engineering.

The osteogenesis of bacterial cellulose scaffold loaded with fisetin

OBJECTIVES

Bacterial cellulose (BC) has applications in medical science, it is easily synthesized, economic and purer compared to plant cellulose. The present study aimed to evaluate BC, a biocompatible natural polymer, as a scaffold for the bone marrow mesenchymal stem cells (BMSCs) loaded with fisetin, a phytoestrogen.

MATERIALS AND METHODS

BC hydrogel scaffold was prepared from Gluconaceter xylinus and characterized through scanning electron microscopy (SEM). Biocompatibility of BC was measured by MTT assay, BMSCs were obtained from femur of rat and the osteogenic potential of the BC scaffold cultured with BMSCs and loaded with fisetin, was investigated by measuring the alkaline phosphatase (ALP) activity, alizarin red staining (ARS) and real-time PCR in terms of osteoblast-specific marker, osteocalcin (OCN) and osteopontin (OPN).

RESULTS

Biocompatibility results did not show any toxic effects of BC scaffold on BMSCs, while it increased cell viability. The data showed that BC loaded fisetin differentiated BMSCs into osteoblasts as demonstrated by ALP activity assays and ARS in vitro. Moreover, results from gene expression assay showed the expression of OCN and OPN genes was increased in cells that were seeded on the BC scaffold loaded with fisetin.

CONCLUSION

According to the results of the present study, BC loaded with fisetin is an effective strategy to promote osteogenic differentiation and a proper localized delivery system, which could be a potential candidate in bone tissue engineering.