Diatom adhesive mucilage contains distinct supramolecular assemblies of a single modular protein

Marine biofouling and the role of biocidal coatings in balancing environmental impacts

Marine biofouling is a global problem affecting various industries, particularly the shipping industry due to long-distance voyages across various ecosystems. Therein fouled hulls cause increased fuel consumption, greenhouse gas emissions, and the spread of invasive aquatic species. To counteract these issues, biofouling management plans are employed using manual cleaning protocols and protective coatings. This review provides a comprehensive overview of adhesion strategies of marine organisms, and currently available mitigation methods. Further, recent developments and open challenges of antifouling (AF) and fouling release (FR) coatings are discussed with regards to the future regulatory environment. Finally, an overview of the environmental and economic impact of fouling is provided to point out why and when the use of biocidal solutions is beneficial in the overall perspective.

Mechanical testing of particle streaming and intact extracellular mucilage nanofibers reveal a role of elastic force in diatom motility

Diatoms are unicellular microalgae with a rigid cell wall, able to glide on surfaces by releasing nanopolymeric fibers through central slits known as raphes. Here we consider the modelNitszchia communisto perform quantitative studies on two complementary aspects involved in diatom gliding. Using video microscopy and automated image analysis, we measure the motion of test beads as they are pulled by extracellular polymeric substances (EPS) fibers at the diatom raphe (particle streaming). A multimodal distribution of particle speed is found, evidencing the appearance of short-time events of high speed and acceleration (known as jerky motion) and suggesting that different mechanisms contribute to set diatom velocity during gliding. Furthermore, we use optical tweezers to obtain force-extension records for extracellular diatom nanofibers; records are well described by the worm-like chain model of polymer elasticity. In contrast to previous studies based on application of denaturing force (in the nN regime), application of low force (up to 6 pN) and using enable us to obtain the persistence length of intact fibers. From these measurements, mechanical parameters of EPS fibers such as radius and elastic constant are estimated. Furthermore, by modeling particle streaming as a spring in parallel with a dashpot, we show that the time involved in the release of mechanical energy after fiber detachment from beads (elastic snapping) agrees with our observations of jerky motion. We conclude that the smooth and jerky motions displayed by gliding diatoms correspond to molecular motors and elastic snapping, respectively, thus providing quantitative elements that incorporate to current models of the mechanics behind diatom locomotion.

Zwitterionic Peptides Reduce Accumulation of Marine and Freshwater Biofilm Formers

Zwitterionic peptides are facile low-fouling compounds for environmental applications as they are biocompatible and fully biodegradable as their degradation products are just amino acids. Here, a set of histidine (H) and glutamic acid (E), as well as lysine (K) and glutamic acid (E) based peptide sequences with zwitterionic properties were synthesized. Both oligopeptides (KE)₄K and (HE)₄H were synthesized in d and l configurations to test their ability to resist the nonspecific adsorption of the proteins lysozyme and fibrinogen. The coatings were additionally tested against the attachment of the marine organisms Navicula perminuta and Cobetia marina as well as the freshwater bacterium Pseudomonas fluorescens on the developed coatings. While the peptides containing lysine performed better in protein resistance assays and against freshwater bacteria, the sequences containing histidine were generally more resistant against marine organisms. The contribution of amino acid-intrinsic properties such as side chain pK_a values and hydrophobicity, as well as external parameters such as pH and salinity of fresh water and seawater on the resistance of the coatings is discussed. In this way, a detailed picture emerges as to which zwitterionic sequences show advantages in future generations of biocompatible, sustainable, and nontoxic fouling release coatings.

Probing the Adhesion of the Common Freshwater Diatom Nitzschia palea at Nanoscale

Freshwater biofilms play an essential ecological role, but they also adversely affect human activities through undesirable biofouling of artificial submerged structures. They form complex aggregates of microorganisms that colonize any type of substratum. In phototrophic biofilms, diatoms dominate in biomass and produce copious amount of extracellular polymeric substances (EPSs), making them efficient early colonizers. Therefore, a better understanding of diatoms adhesive properties is essential to develop new anti-biofouling strategies. In this context, we used atomic force microscopy (AFM) to decipher the topography and adhesive mechanisms of the common freshwater diatom Nitzschia palea. Images taken in physiological conditions revealed typical ultrastructural features with a few nanometers resolution. Using single-cell force spectroscopy, we showed that N. palea strongly adheres to hydrophobic surfaces as compared to hydrophilic ones. Chemical force spectroscopy with hydrophobic tips further confirmed that the adhesion is governed by surface-associated hydrophobic EPS distributed in clusters at the frustule surface, and mostly composed of (glyco)-lipids as revealed by Raman spectroscopy. Collectively, our results demonstrate that AFM-based nanoscopy, combined with Raman spectroscopy, is a powerful tool to provide new insights into the adhesion mechanisms of diatoms.

Parallelized microfluidic diatom accumulation assay to test fouling-release coatings

Assessing the efficiency of the next generation of protective marine coatings is highly relevant for their optimization. In this paper, a parallelized microfluidic testing device is presented to quantify the accumulation of a model organism (Navicula perminuta) under constant laminar flow. Using automated microscopy in conjunction with image analysis, the adhesion densities on the tested surfaces could be determined after exposure to a flow of suspended algae for 90 min. The optimized protocol for the assay is presented, and the reproducibility of the densities of attached diatoms was verified on four identical surfaces (self-assembled dodecanethiol monolayers). A set of well-characterized self-assembled monolayers with different chemical terminations was used to validate the performance of the assay and its capability to discriminate diatom accumulation on different surface chemistries under dynamic conditions. The observed trends are in good agreement with previously published results obtained in single channel accumulation and detachment assays. To demonstrate the practical relevance of the dynamic experiment, diatom attachment on four technically relevant silicone coatings with different fouling-release properties could clearly be distinguished.

Microfluidic accumulation assay probes attachment of biofilm forming diatom cells

Testing of fouling release (FR) technologies is of great relevance for discovery of the next generation of protective marine coatings. In this paper, an accumulation assay to test diatom interaction under laminar flow with the model organism Navicula perminuta is introduced. Using time lapse microscopy with large area sampling allows determination of the accumulation kinetics of the diatom on three model surfaces with different surface properties at different wall shear stresses. The hydrodynamic conditions within the flow cell are described and a suitable shear stress range to perform accumulation experiments is identified at which statistically significant discrimination of surfaces is possible. The observed trends compare well to published adhesion preferences of N. perminuta. Also, previously determined trends of critical wall shear stresses required for cell removal from the same set of functionalized interfaces shows consistent trends. Initial attachment mediated by extracellular polymeric substances (EPS) present outside the diatoms leads to the conclusion that the FR potential of the tested coating candidates can be deducted from dynamic accumulation experiments under well-defined hydrodynamic conditions. As well as testing new coating candidates for their FR properties, monitoring of the adhesion process under flow provides additional information on the mechanism and geometry of attachment and the population kinetics.

Self-assembly of polysaccharides gives rise to distinct mechanical signatures in marine gels

Marine-gel biopolymers were recently visualized at the molecular level using atomic force microscopy (AFM) to reveal fine fibril-forming networks with low to high degrees of cross-linking. In this work, we use force spectroscopy to quantify the intra- and intermolecular forces within the marine-gel network. Combining force measurements, AFM imaging, and the known chemical composition of marine gels allows us to identify the microscopic origins of distinct mechanical responses. At the single-fibril level, we uncover force-extension curves that resemble those of individual polysaccharide fibrils. They exhibit entropic elasticity followed by extensions associated with chair-to-boat transitions specific to the type of polysaccharide at high forces. Surprisingly, a low degree of cross-linking leads to sawtooth patterns that we attribute to the unraveling of polysaccharide entanglements. At a high degree of cross-linking, we observe force plateaus that arise from unzipping, as well as unwinding, of helical bundles. Finally, the complex 3D network structure gives rise to force staircases of increasing height that correspond to the hierarchical peeling of fibrils away from the junction zones. In addition, we show that these diverse mechanical responses also arise in reconstituted polysaccharide gels, which highlights their dominant role in the mechanical architecture of marine gels.

Energy dissipation and recovery in a simple model with reversible cross-links

Reversible cross-linking is a method of enhancing the mechanical properties of polymeric materials. The inspiration for this kind of cross-linking comes from nature, which uses this strategy in a large variety of biological materials to dramatically increase their toughness. Recently, first attempts were made to transfer this principle to technological applications. In this study, Monte Carlo simulations are used to investigate the effect of the number and the topology of reversible cross-links on the mechanical performance of a simple model system. Computational cyclic loading tests are performed, and the work to fracture and the energy dissipation per cycle are determined, which both increase when the density of cross-links is increased. Furthermore, a different topology of the bonds may increase the work to fracture by a factor of more than 2 for the same density. This dependence of the mechanical properties on the topology of the bonds has important implications on the self-healing properties of such systems, because only a fast return of the system to its unloaded state after release of the load ensures that the optimal topology may form.

Adhesion molecules from the diatom Phaeodactylum tricornutum (Bacillariophyceae): genomic identification by amino-acid profiling and in vivo analysis

Cell adhesion molecules (CAMs) are important in prokaryotes and eukaryotes for cell-cell and cell-substratum interactions. The characteristics of adhesive proteins in the model diatom Phaeodactylum tricornutum were investigated by bioinformatic analysis and in vivo characterization. Bioinformatic analysis of the protein coding potential of the P. tricornutum genome used an amino-acid profile that we developed as a new system to identify uncharacterized or novel CAMs. Putative diatom CAMs were identified and seven were characterized in vivo, by generation of transgenic diatom lines overexpressing genes encoding C-terminal yellow fluorescent protein (YFP) fusion proteins. Three of these selected genes encode proteins with weak similarity to characterized proteins, a c-type lectin and two fasciclins, whereas the others are novel. The resultant cell lines were investigated for alterations in their adhesive ability. Whole cell-substratum adhesion strength was measured in a fully turbulent flow chamber, while atomic force microscopy was used to quantify the relative frequency of adhesion, as well as the length and strength of single molecules in the secreted mucilage. Finally, quartz crystal microbalance analysis characterized the visco-elastic properties and interaction of the mucilage-substratum interface. These combined studies revealed a range of phenotypes affecting adhesion, and led to the identification of candidate proteins involved in diatom adhesion. In summary, our study has for the first time combined bioinformatics and molecular physiological studies to provide new insights into diatom adhesive molecules.

Isolation and biochemical characterization of underwater adhesives from diatoms

Many aquatic organisms are able to colonize surfaces through the secretion of underwater adhesives. Diatoms are unicellular algae that have the capability to colonize any natural and man-made submerged surfaces. There is great technological interest in both mimicking and preventing diatom adhesion, yet the biomolecules responsible have so far remained unidentified. A new method for the isolation of diatom adhesive material is described and its amino acid and carbohydrate composition determined. The adhesive materials from two model diatoms show differences in their amino acid and carbohydrate compositions, but also share characteristic features including a high content of uronic acids, the predominance of hydrophilic amino acid residues, and the presence of 3,4-dihydroxyproline, an extremely rare amino acid. Proteins containing dihydroxyphenylalanine, which mediate underwater adhesion of mussels, are absent. The data on the composition of diatom adhesives are consistent with an adhesion mechanism based on complex coacervation of polyelectrolyte-like biomolecules.

Marine polysaccharide networks and diatoms at the nanometric scale

Despite many advances in research on photosynthetic carbon fixation in marine diatoms, the biophysical and biochemical mechanisms of extracellular polysaccharide production remain significant challenges to be resolved at the molecular scale in order to proceed toward an understanding of their functions at the cellular level, as well as their interactions and fate in the ocean. This review covers studies of diatom extracellular polysaccharides using atomic force microscopy (AFM) imaging and the quantification of physical forces. Following a brief summary of the basic principle of the AFM experiment and the first AFM studies of diatom extracellular polymeric substance (EPS), we focus on the detection of supramolecular structures in polysaccharide systems produced by marine diatoms. Extracellular polysaccharide fibrils, attached to the diatom cell wall or released into the surrounding seawater, form distinct supramolecular assemblies best described as gel networks. AFM makes characterization of the diatom polysaccharide networks at the micro and nanometric scales and a clear distinction between the self-assembly and self-organization of these complex systems in marine environments possible.

Underwater locomotion strategy by a benthic pennate diatom Navicula sp

The mechanism of diatom locomotion has been widely researched but still remains a hypothesis. There are several questionable points on the prevailing model proposed by Edgar, and some of the observed phenomena cannot be completely explained by this model. In this paper, we undertook detailed investigations of cell structures, locomotion, secreted mucilage, and bending deformation for a benthic pennate diatom Navicula species. According to these broad evidences, an updated locomotion model is proposed. For Navicula sp., locomotion is realized via two or more pseudopods or stalks protruded out of the frustules. The adhesion can be produced due to the pull-off of one pseudopod or stalk from the substratum through extracellular polymeric substances. And the positive pressure is generated to balance the adhesion because of the push-down of another pseudopod or stalk onto the substratum. Because of the positive pressure, friction is generated, acting as a driving force of locomotion, and the other pseudopod or stalk can detach from the substratum, resulting in the locomotion. Furthermore, this model is validated by the force evaluation and can better explain observed phenomena. This updated model would provide a novel aspect on underwater locomotion strategy, hence can be useful in terms of artificial underwater locomotion devices.

Characterization of the extracellular matrix of Phaeodactylum tricornutum (Bacillariophyceae): structure, composition, and adhesive characteristics

The extracellular matrix of the ovoid and fusiform morphotypes of Phaeodactylum tricornutum (Bohlin) was characterized in detail. The structural and nanophysical properties were analyzed by microscopy. Of the two morphotypes, only the ovoid form secretes adhesive mucilage; light microscopy and scanning electron microscopy images showed that the mucilage was secreted from the girdle band region of the cell as cell-substratum tethers, accumulating on the surface forming a biofilm. After 7 d, the secreted mucilage became entangled, forming adhesive strands that crisscrossed the substratum surface. In the initial secreted mucilage atomic force microscopy identified a high proportion of adhesive molecules without regular retraction curves and some modular-like adhesive molecules, in the 7 d old biofilm, the adhesive molecules were longer with fewer adhesive events but greater adhesive strength. Chemical characterization was carried out on extracted proteins and polysaccharides. Differences in protein composition, monosaccharide composition, and linkage analysis are discussed in relation to the composition of the frustule and secreted adhesive mucilage. Polysaccharide analysis showed a broad range of monosaccharides and linkages across all fractions with idiosyncratic enrichment of particular monosaccharides and linkages in each fraction. 3-linked Mannan was highly enriched in the cell frustule fractions indicating a major structural role, while Rhamnose and Fucose derivatives were enriched in the secreted fractions of the ovoid morphotype suggesting involvement in cell adhesion. Comparison of SDS-PAGE of extracellular proteins showed two major bands for the ovoid morphotype and four for the fusiform morphotype of which only one appeared to be common to both morphotypes.

QUANTITATIVE NANOMECHANICAL MAPPING OF MARINE DIATOM IN SEAWATER USING PEAK FORCE TAPPING ATOMIC FORCE MICROSCOPY(1)

It is generally accepted that a diatom cell wall is characterized by a siliceous skeleton covered by an organic envelope essentially composed of polysaccharides and proteins. Understanding of how the organic component is associated with the silica structure provides an important insight into the biomineralization process and patterning on the cellular level. Using a novel atomic force microscopy (AFM) imaging technique (Peak Force Tapping), we characterized nanomechanical properties (elasticity and deformation) of a weakly silicified marine diatom Cylindrotheca closterium (Ehrenb.) Reimann et J. C. Lewin (strain CCNA1). The nanomechanical properties were measured over the entire cell surface in seawater at a resolution that was not achieved previously. The fibulae were the stiffest (200 MPa) and the least deformable (only 1 nm). Girdle band region appeared as a series of parallel stripes characterized by two sets of values of Young's modulus and deformation: one for silica stripes (43.7 Mpa, 3.7 nm) and the other between the stripes (21.3 MPa, 13.4 nm). The valve region was complex with average values of Young's modulus (29.8 MPa) and deformation (10.2 nm) with high standard deviations. After acid treatment, we identified 15 nm sized silica spheres in the valve region connecting raphe with the girdle bands. The silica spheres were neither fused together nor forming a nanopattern. A cell wall model is proposed with individual silica nanoparticles incorporated in an organic matrix. Such organization of girdle band and valve regions enables the high flexibility needed for movement and adaptation to different environments while maintaining the integrity of the cell.

Review--Interactions between diatoms and stainless steel: focus on biofouling and biocorrosion

There is a considerable body of information regarding bacterially enhanced corrosion, however, this review focuses on diatoms (unicellular algae) whose contribution to biocorrosion is less well studied. The reasons why diatoms have been neglected in studies of biocorrosion in natural waters are discussed and the question whether diatoms should be considered as inert with respect of electrochemical processes is considered. A particular focus is given to the case of stainless steels (SS), which are widely used in variety of applications in natural waters. Basic information on the cell biology of diatoms is included in the review, particularly with respect to their ability to 'sense' and adhere to surfaces. Investigations at the nanoscale are reviewed as these studies provide information about the behavior of cells at interfaces. Recent advances include the use of atomic force microscopy (AFM), although only a few studies have been applied to diatoms. Regarding the electrochemical behavior of SS, the mechanisms by which diatoms influence the potential ennoblement process is discussed. Such studies reveal the association of diatoms, in addition to bacteria, with biocorrosion processes.

AFM imaging of extracellular polymer release by marine diatom Cylindrotheca closterium (Ehrenberg) Reiman & J.C. Lewin

Extracellular polysaccharide production by marine diatoms is a significant route by which photosynthetically produced organic carbon enters the trophic web and may influence the physical environment in the sea. This study highlights the capacity of atomic force microscopy (AFM) for investigating diatom extracellular polysaccharides with a subnanometer resolution. Here we address a ubiquitous marine diatom Cylindrotheca closterium, isolated from the northern Adriatic Sea, and its extracellular polymeric substance (EPS) at a single cell level. We applied a simple procedure for AFM imaging of diatom cells on mica under ambient conditions (in air) to achieve visualization of their EPS with molecular resolution. The EPS represents a web of polysaccharide fibrils with two types of cross-linking: fibrils association forming junction zones and fibril-globule interconnections with globules connecting two or more fibrils. The fibril heights were 0.4-2.6 nm while globules height was in the range of 3-12 nm. Polymer networks of native gel samples from the Northern Adriatic and the network formed by polysaccharides extracted from the C. closterium culture share the same features regarding the fibril heights, pore openings and the mode of fibril association, proving that the macroscopic gel phase in the Northern Adriatic can be formed directly by the self-assembly of diatom released polysaccharide fibrils.

Atomic force microscopy to study intermolecular forces and bonds associated with bacteria

Atomic force microscopy (AFM) operates on a very different principle than other forms of microscopy, such as optical microscopy or electron microscopy. The key component of an AFM is a cantilever that bends in response to forces that it experiences as it touches another surface. Forces as small as a few picoNewtons can be detected and probed with AFM. AFM has become very useful in biological sciences because it can be used on living cells that are immersed in water. AFM is particularly useful when the cantilever is modified with chemical groups (e.g. amine or carboxylic groups), small beads (e.g. glass or latex), or even a bacterium. This chapter describes how AFM can be used to measure forces and bonds between a bacterium and another surface. This paper also provides an example of the use of AFM on Staphylococcus aureus, a Gram-positive bacterium that is often associated with biofilms in humans.

Real-time quantification of microscale bioadhesion events in situ using imaging surface plasmon resonance (iSPR)

From macro- to nanoscales, adhesion phenomena are all-pervasive in nature yet remain poorly understood. In recent years, studies of biological adhesion mechanisms, terrestrial and marine, have provided inspiration for "biomimetic" adhesion strategies and important insights for the development of fouling-resistant materials. Although the focus of most contemporary bioadhesion research is on large organisms such as marine mussels, insects and geckos, adhesion events on the micro/nanoscale are critical to our understanding of important underlying mechanisms. Observing and quantifying adhesion at this scale is particularly relevant for the development of biomedical implants and in the prevention of marine biofouling. However, such characterization has so far been restricted by insufficient quantities of material for biochemical analysis and the limitations of contemporary imaging techniques. Here, we introduce a recently developed optical method that allows precise determination of adhesive deposition by microscale organisms in situ and in real time; a capability not before demonstrated. In this extended study we used the cypris larvae of barnacles and a combination of conventional and imaging surface plasmon resonance techniques to observe and quantify adhesive deposition onto a range of model surfaces (CH(3)-, COOH-, NH(3)-, and mPEG-terminated SAMs and a PEGMA/HEMA hydrogel). We then correlated this deposition to passive adsorption of a putatively adhesive protein from barnacles. In this way, we were able to rank surfaces in order of effectiveness for preventing barnacle cyprid exploration and demonstrate the importance of observing the natural process of adhesion, rather than predicting surface effects from a model system. As well as contributing fundamentally to the knowledge on the adhesion and adhesives of barnacle larvae, a potential target for future biomimetic glues, this method also provides a versatile technique for laboratory testing of fouling-resistant chemistries.

A tactile response in Staphylococcus aureus

It is well established that bacteria are able to respond to temporal gradients (e.g., by chemotaxis). However, it is widely held that prokaryotes are too small to sense spatial gradients. This contradicts the common observation that the vast majority of bacteria live on the surface of a solid substrate (e.g., as a biofilm). Herein we report direct experimental evidence that the nonmotile bacterium Staphylococcus aureus possesses a tactile response, or primitive sense of touch, that allows it to respond to spatial gradients. Attached cells recognize their substrate interface and localize adhesins toward that region. Braille-like avidity maps reflect a cell's biochemical sensory response and reveal ultrastructural regions defined by the actual binding activity of specific proteins.

Bonds between fibronectin and fibronectin-binding proteins on Staphylococcus aureus and Lactococcus lactis

Bacterial cell-wall-associated fibronectin binding proteins A and B (FnBPA and FnBPB) form bonds with host fibronectin. This binding reaction is often the initial step in prosthetic device infections. Atomic force microscopy was used to evaluate binding interactions between a fibronectin-coated probe and laboratory-derived Staphylococcus aureus that are (i) defective in both FnBPA and FnBPB (fnbA fnbB double mutant, DU5883), (ii) capable of expressing only FnBPA (fnbA fnbB double mutant complemented with pFNBA4), or (iii) capable of expressing only FnBPB (fnbA fnbB double mutant complemented with pFNBB4). These experiments were repeated using Lactococcus lactis constructs expressing fnbA and fnbB genes from S. aureus. A distinct force signature was observed for those bacteria that expressed FnBPA or FnBPB. Analysis of this force signature with the biomechanical wormlike chain model suggests that parallel bonds form between fibronectin and FnBPs on a bacterium. The strength and covalence of bonds were evaluated via nonlinear regression of force profiles. Binding events were more frequent (p < 0.01) for S. aureus expressing FnBPA or FnBPB than for the S. aureus double mutant. The binding force, frequency, and profile were similar between the FnBPA and FnBPB expressing strains of S. aureus. The absence of both FnBPs from the surface of S. aureus removed its ability to form a detectable bond with fibronectin. By contrast, ectopic expression of FnBPA or FnBPB on the surface of L. lactis conferred fibronectin binding characteristics similar to those of S. aureus. These measurements demonstrate that fibronectin-binding adhesins FnBPA and FnBPB are necessary and sufficient for the binding of S. aureus to prosthetic devices that are coated with host fibronectin.

Atomic force microscopy of the morphology and mechanical behaviour of barnacle cyprid footprint proteins at the nanoscale

Barnacles are a major biofouler of man-made underwater structures. Prior to settlement, cypris larvae explore surfaces by reversible attachment effected by a 'temporary adhesive'. During this exploratory behaviour, cyprids deposit proteinaceous 'footprints' of a putatively adhesive material. In this study, footprints deposited by Balanus amphitrite cyprids were probed by atomic force microscopy (AFM) in artificial sea water (ASW) on silane-modified glass surfaces. AFM images obtained in air yielded better resolution than in ASW and revealed the fibrillar nature of the secretion, suggesting that the deposits were composed of single proteinaceous nanofibrils, or bundles of fibrils. The force curves generated in pull-off force experiments in sea water consisted of regions of gradually increasing force, separated by sharp drops in extension force manifesting a characteristic saw-tooth appearance. Following the relaxation of fibrils stretched to high strains, force-distance curves in reverse stretching experiments could be described by the entropic elasticity model of a polymer chain. When subjected to relaxation exceeding 500 ms, extended footprint proteins refolded, and again showed saw-tooth unfolding peaks in subsequent force cycles. Observed rupture and hysteresis behaviour were explained by the 'sacrificial bond' model. Longer durations of relaxation (>5 s) allowed more sacrificial bond reformation and contributed to enhanced energy dissipation (higher toughness). The persistence length for the protein chains (L(P)) was obtained. At high elongation, following repeated stretching up to increasing upper strain limits, footprint proteins detached at total stretched length of 10 microm.

On the remarkable mechanostability of scaffoldins and the mechanical clamp motif

Protein mechanostability is a fundamental biological property that can only be measured by single-molecule manipulation techniques. Such studies have unveiled a variety of highly mechanostable modules (mainly of the Ig-like, beta-sandwich type) in modular proteins subjected to mechanical stress from the cytoskeleton and the metazoan cell-cell interface. Their mechanostability is often attributed to a "mechanical clamp" of secondary structure (a patch of backbone hydrogen bonds) fastening their ends. Here we investigate the nanomechanics of scaffoldins, an important family of scaffolding proteins that assembles a variety of cellulases into the so-called cellulosome, a microbial extracellular nanomachine for cellulose adhesion and degradation. These proteins anchor the microbial cell to cellulose substrates, which makes their connecting region likely to be subjected to mechanical stress. By using single-molecule force spectroscopy based on atomic force microscopy, polyprotein engineering, and computer simulations, here we show that the cohesin I modules from the connecting region of cellulosome scaffoldins are the most robust mechanical proteins studied experimentally or predicted from the entire Protein Data Bank. The mechanostability of the cohesin modules studied correlates well with their mechanical kinetic stability but not with their thermal stability, and it is well predicted by computer simulations, even coarse-grained. This extraordinary mechanical stability is attributed to 2 mechanical clamps in tandem. Our findings provide the current upper limit of protein mechanostability and establish shear mechanical clamps as a general structural/functional motif widespread in proteins putatively subjected to mechanical stress. These data have important implications for the scaffoldin physiology and for protein design in biotechnology and nanotechnology.

Nanoscale structural and mechanical properties of nontypeable Haemophilus influenzae biofilms

Nontypeable Haemophilus influenzae (NTHI) bacteria are commensals in the human nasopharynx, as well as pathogens associated with a spectrum of acute and chronic infections. Two important factors that influence NTHI pathogenicity are their ability to adhere to human tissue and their ability to form biofilms. Extracellular polymeric substances (EPS) and bacterial appendages such as pili critically influence cell adhesion and intercellular cohesion during biofilm formation. Structural components in the outer cell membrane, such as lipopolysaccharides, also play a fundamental role in infection of the host organism. In spite of their importance, these pathogenic factors are not yet well characterized at the nanoscale. Here, atomic force microscopy (AFM) was used in aqueous environments to visualize structural details, including probable Hif-type pili, of live NTHI bacteria at the early stages of biofilm formation. Using single-molecule AFM-based spectroscopy, the molecular elasticities of lipooligosaccharides present on NTHI cell surfaces were analyzed and compared between two strains (PittEE and PittGG) with very different pathogenicity profiles. Furthermore, the stiffness of single cells of both strains was measured and subsequently their turgor pressure was estimated.

The quartz crystal microbalance: a new tool for the investigation of the bioadhesion of diatoms to surfaces of differing surface energies

Diatoms are a major component of the biofoul layer found on modern low-surface-energy, 'foul release' coatings. While diatoms adhere more strongly to hydrophobic, as opposed to hydrophilic, surfaces, surprisingly little is known of the chemical composition of their adhesives. Even less is known about the underlying processes that characterize the interaction between the adhesive and a given surface, including those of differing wettability. Using the quartz crystal microbalance with dissipation monitoring (QCM-D), we examined differences in the viscoelastic properties of the extracellular adhesives produced by the marine diatoms Amphora coffeaeformis Cleve and Craspedostauros australis Cox interacting with surfaces of differing wettability; 11-mercaptoundecanoic acid (MUA) that is hydrophilic and 1-undecanethiol (UDT) that is hydrophobic. While the overall delta f/delta D ratios were slightly different, the trends were the same for both diatom species, with the layer secreted upon UDT to be more viscoelastic and far more consistent over several experiments, compared to that on MUA which was less viscoelastic and demonstrated far more variability between experiments. While the nature of the parameter shifts for C. australis were the same for both surfaces, A. coffeaeformis cells settling upon UDT illustrated significant positive f and D shifts during the initial stages of cell settlement and adhesion to the surface. Further experiments revealed the parameter shifts to occur only during the initial adhesion of cells upon the pristine virgin UDT surface. The mechanism behind these parameter responses was isolated to the actin-myosin/adhesion complex (AC), using the myosin inhibitor 2,3-butanedione 2-monoxime (BDM) to remove the cells ability to 'pull' on adhesive strands emanating from the cell raphe. The observations made herein have revealed that adhesives secreted by fouling diatoms differ significantly in their interaction with surfaces depending on their wettability, as well as illustrating the unique mechanics behind the adhesion of A. coffeaeformis upon hydrophobic surfaces, a mechanism that may contribute significantly to the cells success in colonizing hydrophobic surfaces.

Towards a nanomechanical basis for temporary adhesion in barnacle cyprids (Semibalanus balanoides)

Cypris larvae of barnacles are able to use a rapidly reversible temporary adhesion mechanism for exploring immersed surfaces. Despite decades of research interest, the means by which cyprids maintain attachment with surfaces prior to permanent settlement remain poorly understood. Here, we present novel observations on the morphology of 'footprints' of a putative adhesive secretion deposited by cyprids during surface exploration. Atomic force microscopy (AFM) was used to image footprints at high resolution and to acquire measurements of interaction forces. R-CH3- and R-NH2-terminated glass surfaces were used for comparison of footprint morphology, and it was noted that on R-NH2 each footprint comprised three times the volume of material deposited for footprints on R-CH3. Direct scaling of adhesion forces derived from AFM measurements did not adequately predict the real attachment tenacity of cyprids, and it is suggested that a mixture of 'wet' and 'dry' adhesive mechanisms may be at work in cyprid adhesion. High-resolution images of cyprid footprints are presented that correlate well with the known morphology of the attachment structures.

Divalent cations stabilize the aggregation of sulfated in the adhesive nanofibers of the biofouling diatom Toxarium undulatum

A species of marine diatom, Toxarium undulatum, has emerged as a problematic biofouler of contemporary environmentally benign marine coatings. Previous analyses by atomic force microscopy (AFM) showed the cell-substratum adhesive of this alga contained macromolecules with a modular protein backbone assembled into nanofibers in which the domains of the macromolecules folded and unfolded in a co-ordinated manner. In the present study, we investigated further the composition and properties of the adhesive. A combination of energy dispersive X-ray analysis (EDXA) and Fourier transform infrared (FTIR) spectroscopy showed that the adhesive contained mainly protein, carbohydrate, sulfate, calcium, and magnesium. AFM demonstrated that EDTA treatment of native T. undulatum adhesive resulted in rapid disruption of the adhesive nanofiber (ANF) structure but ANFs were restored by subsequent treatment (within 1 h) with solutions containing divalent cations. Prolonged exposure to EDTA (≥18 h) led to cell detachment. The soluble EDTA extract was separated from the cells, dialyzed, concentrated, and analyzed further. The extract had a protein-to-carbohydrate-to-sulfate weight ratio of 1.0 : 0.2 : 0.9 and contained a single, high-molecular-mass (>220 kDa) band by SDS-PAGE which was visualized by Stains-All® but not by Coomassie blue, indicating that it was a highly anionic macromolecule. The most abundant amino acids in the extract were glycine (22 mol%), aspartic acid/aspartamine (14 mol%), and histidine (11 mol%). The adhesive contained 11 neutral sugars dominated by mannose (50 mol%) and xylose (29 mol%). On the basis of these data, we propose that the ANFs of T. undulatum are composed of sulfated high-molecular-mass glycoproteins cross-linked by calcium and magnesium ions. The cross-linking enables domains of adjacent protein backbones to unfold and re-fold in register.

The biology of biofouling diatoms and their role in the development of microbial slimes

Diatoms are a major component of microbial slimes that develop on man-made surfaces placed in the marine environment. Toxic antifouling paints, as well as environmentally friendly, fouling-release coatings, tend to be effective against most fouling organisms, yet fail badly to diatom slimes. Biofouling diatoms have been found to tenaciously adhere to and colonise even the most resistant of artificial surfaces. This review covers the basic biology of fouling marine diatoms, their mechanisms of adhesion and the nature of their adhesives, as well as documenting the various approaches that have been utilised to understand the formation and maintenance of diatom biofouling layers.

The mechanical fingerprint of a parallel polyprotein dimer

We use the GCN4 oligomerization domain to engineer a covalently linked parallel polyprotein dimer based on the well-studied I27 domain of titin. We use single molecule atomic force microscopy techniques to stretch single polyprotein fibers and verify their mechanical properties. We find that the engineered polyprotein dimers extend in perfect register, doubling the unfolding force and halving the persistence length while keeping the contour length increase unchanged. These experiments directly confirm the mechanical scaling laws proposed for parallel bundles of modular proteins.

Adhesive modular proteins occur in the extracellular mucilage of the motile, pennate diatom Phaeodactylum tricornutum

This Letter reports on adhesive modular proteins recorded by atomic force microscopy on live cells from the extracellular mucilage secreted from, and deposited around, the motile form of the pennate diatom Phaeodactylum tricornutum. This is the first report of modular proteins and their supramolecular assemblies, called adhesive nanofibers (ANFs), to be found on diatoms that use adhesives not only for substratum adhesion, but as a conduit for cell motility. The permanent adhesive pads secreted by Toxarium undulatum, a sessile centric diatom, were previously shown to possess ANFs with a modular protein backbone. Our results reported here suggest that modular proteins may be an important component of diatom adhesives in general, and that diatoms utilize the tensile strength, toughness, and flexibility of ANFs for multiple functions. Significantly, the genome of P. tricornutum has recently been sequenced; this will allow directed searches of the genome to be made for genes with modular protein homologs, and subsequent detailed studies of their molecular structure and function.