Evaluation of single root canals filled using the lateral compaction, tagger's hybrid, microseal and guttaflow techniques

Effect of the filling technique on the filling removal from oval-shaped canals

OBJECTIVES

This ex vivo study aimed to evaluate the influence of different filling techniques on the filling removal from oval root canals filled with bioceramic sealer.

METHODS

Thirty-six mandibular incisors with single oval canals were filled with bioceramic sealer following the techniques (n = 12): single-cone, modified McSpadden, or continuous wave of condensation, and scanned by micro-computed tomography (micro-CT). The filling was removed using the Clearsonic ultrasound tip and Reciproc system up to the R40 instrument, and the working time was recorded. The teeth were scanned again by micro-CT. Percentage of remnant volume (mm³) of the filling material, dentin thickness, and root canal transportation were measured. The data was analyzed using parametric and non-parametric tests with a significance level of 5%.

RESULTS

It took more time to remove the filling material using the continuous wave of condensation technique (p < 0.05), followed by the modified McSpadden and single-cone techniques. There was no difference (p > 0.05) when comparing the percentage of remaining filling material among the three groups, nor did it among the segments of each tooth. There was also no difference in the analysis of dentin thickness and transportation when comparing the groups (p > 0.05).

CONCLUSIONS

The filling technique did not influence the amount of remaining filling material, dentin thickness, and transportation. The working time was longer with thermoplastic filling techniques.

CLINICAL RELEVANCE

Endodontic retreatment in teeth filled with bioceramic sealers increases with their use. Several techniques are used to fill the root canals, thus, it is important to know whether the filling technique influences the non-surgical endodontic retreatment.

Comparative evaluation of the antibacterial activity of curcumin-coated gutta-percha versus nanocurcumin-coated gutta-percha against Escherichia coli: An in vitro study

Introduction

Due to its biological and antibacterial qualities, many plants, including curcumin, are used as phytomedicines in dentistry. They are primarily used as intracanal medication in endodontics to prevent probable chemical side effects and also to address antimicrobial resistance. Curcumin nanoformulations have improved antibacterial activity and improved dispersion, making them the superior form of curcumin. The purpose of this study was to assess curcumin and nanocurcumin's antibacterial properties. As a gutta-percha coating, they are to be tested against Escherichia coli.

Materials and Methods

The study employs the standard strain of E. coli, ATCC 25922. The antibacterial activity of gutta-percha cones against E. coli is assessed after coating them with suspensions of curcumin and nanocurcumin. Scanning electron microscopy is utilized to evaluate the coatings' continuity.

Results

The gutta-percha cones that are untreated, coated with curcumin, and coated with nanocurcumin exhibit significantly different levels of antibacterial activity. There is statistically significant variation in their antibacterial activity.

Conclusion

(1) Compared to curcumin-coated and untreated gutta-percha cones, those coated with nanocurcumin exhibit a stronger antibacterial activity. (2) Compared to uncoated gutta-percha cones, gutta-percha cones coated with curcumin exhibit more antibacterial action.

Assessment of the Penetration of an Endodontic Sealer into Dentinal Tubules with Three Different Compaction Techniques Using Confocal Laser Scanning Microscopy

Adequate root canal sealing is essential for the success of endodontic treatment. There are numerous techniques available; identifying simple and efficient techniques is important to provide good patient care. The purpose of the study was to compare the maximum penetration depth and the percentage of sealant penetration of an endodontic sealer into dentine tubules using cold lateral condensation, continuous wave, and hybrid techniques, and to contrast the effectiveness of two different tapered gutta-percha master cones (0.02 and 0.04). A sample of sixty single root teeth was used. Six experimental groups were formed from the three filling techniques and the two tapered master cones. Images were acquired using a confocal laser scanning microscope. In the apical root third, the penetration percentage was higher in the hybrid compared with the continuous wave technique. The results indicated a higher penetration depth of hybrid compared with cold lateral condensation in the middle and coronal thirds, and in the apical third, a higher penetration was identified in the hybrid group compared with the continuous wave group. No significant differences in penetration were found comparing 0.02 with 0.04 taper gutta-percha groups. The coronal cross-sections presented a higher penetration than the apical third sections. In conclusion, the hybrid technique a had higher maximum sealer penetration than the continuous wave in the apical third, and the coronal third hybrid and continuous wave had a higher penetration than cold lateral condensation.

Cytotoxicity and biocompatibility of root canal sealers: A review on recent studies

Many types of endodontic root canal sealers have been employed for the purpose of filling voids and irregularities in root canals, as well as reducing/removing bacterial remnants/remains. Sealers are available in various formulations, and research work to find the most appropriate ones is still ongoing. Recently, many kinds of novel root canal sealers have been introduced under various commercial names. However, most sealers are known to exhibit different levels of cytotoxicity on tissues which would result in prolonged wound healing, inflammation, and bone resorption. Preferably, sealers need to have tolerable biological and physico-chemical properties along with biocompatibility. Additives promoting the biocompatibility and bioactivity of sealers are of major concern in clinical applications. The aim of this review was to compare, evaluate, and analyze comparatively the cytotoxic effects, biocompatibility, and antimicrobial properties of recently used root canal sealers. A comprehensive literature search was made to identify their properties involving biocompatibility and cytotoxicity. In general, the sealers reported in recent literature exhibited favorable biological features in comparison to conventional ones. They promoted better cell viability and biocompatibility. The incorporation of additives influences favorably the potential negative effects. However, it has been highlighted that there is a lack of well-designed long-term clinical applications, and more in vitro and in vivo research work would be helpful to confirm the sustainability of the sealers for further clinical practice.

Dentinal tubule penetration of gutta-percha with syringe-mix resin sealer using different obturation techniques: A confocal laser scanning microscopy study

This study aimed to evaluate dentinal tubule penetration of the root canal filling material using various techniques such as cold lateral compaction, new generation thermoplastic core carrier and continuous-wave obturation. The root canals of premolar teeth were instrumented, and the teeth were allocated randomly to three groups (n = 15/group). After the obturation with three different techniques, three sections of 2-mm thickness at 2, 5 and 8-mm from the apex were examined under a confocal laser scanning microscope. The data were analysed of variance with a significance level of P < 0.05. There was no significant difference between techniques when parameters were evaluated in total (penetration depth P = 0.418, penetration area P = 0.701). The mean value of the cold lateral compaction group for maximum penetration depth was obtained higher than continuous wave (P = 0.004), whilst there was no significant difference between the thermoplastic core carrier and the other groups.

Effect of obturation technique using a new bioceramic sealer on the presence of voids in flattened root canals

The aim of this study was to evaluate the filling ability of a new ready-to-use calcium silicate-based sealer using thermoplastic or single-cone technique in flattened root canals. Twenty-four flattened distal canals of mandibular molars with a buccolingual diameter 4 or more times larger than the mesiodistal diameter were selected. The root canals were prepared and filled (n = 12), according to the following techniques: thermoplastic or single-cone technique using Bio-C Sealer. The teeth were scanned using Skycan 1176 micro-computed tomography (micro-CT) - voxel size 8.74 µm, before and after filling the root canal. The percentage of voids in the filled root canals was evaluated, and the data were statistically analyzed using the unpaired t-test (α = 0.05). The root canals filled using the thermoplastic technique created a smaller percentage of voids in the cervical/middle thirds than those filled using the single-cone technique (p < 0.05). There was no difference in the percentage of voids using either technique in the apical third (p > 0.05). The flattened root canals in the cervical/middle thirds were better filled using the ready-to-use calcium silicate-based sealer associated to the thermoplastic technique, compared with the single-cone technique. In the apical third, the techniques showed similar filling ability.

Successful Use of MTA Fillapex as a Sealant for Feline Root Canal Therapy of 50 Canines in 37 Cats

Intentional or unintentional pulp exposure of cat canines can lead to periapical disease, osteomyelitis, and oral pain. Root canal therapy (RCT) allows the retention of cat canines with pulp exposure by removing the infected pulp and replacing it with an inert material. This study used MTA Fillapex™ as a root canal sealant with gutta percha single cone obturation in 37 cats (50 canine teeth). Roots were classified as "successful," "no evidence of failure (NEF)," or "failed" at 6-month radiographic reviews. Therapy was considered "successful" if a preoperative periapical lucency had healed or not formed after treatment and any preoperative external inflammatory root resorption (EIRR) had stabilized without progression. Therapy was categorized as "NEF" if a periapical lucency had remained the same or decreased in size but not completely resolved and any preoperative EIRR had stabilized without progression. "Failed" if a periapical lucency had occurred or increased in size posttreatment or if EIRR had developed or progressed posttreatment. Thirty-two canine teeth (64%) were classified as "successful," 14 canine teeth (28%) were classified as "NEF," and 4 canine teeth (8%) were classified as "failed". The study concluded that RCT using MTA Fillapex as a root canal sealant is a suitable endodontic treatment for fractured cat canines, especially those that are periodontally or endodontically challenged.

Novel endodontic sealers induce cell cytotoxicity and apoptosis in a dose-dependent behavior and favorable response in mice subcutaneous tissue

OBJECTIVES

The objective of the present study is to evaluate the in vitro cytotoxicity and in vivo biocompatibility of two novel endodontic sealers: RealSeal XT1 and Sealapex Xpress on the subcutaneous connective tissue of mice.

MATERIALS AND METHODS

The cytotoxicity was assessed by cell viability using the MTT assay (one-way ANOVA), trypan blue test (Mann-Whitney) and cell apoptosis by flow cytometer. For the subcutaneous study, polyethylene tubes filled with the sealers were implanted in 70 BALB/c mice: 6 experimental groups (n = 10/group) and 2 control groups with empty tubes (n = 5/group). At the end of experimental periods (7, 21, and 63 days), the tissue was removed and histotechnically processed. Angioblastic proliferation and edema (Fisher's exact test) were evaluated, besides thickness measurement (μm) of the reactionary granulomatous tissue and neutrophil counts (Kruskal-Wallis and Dunn's post test; Mann-Whitney) (α = 0.05).

RESULTS

MTT assay, trypan blue, and analysis of apoptotic cells showed a dose-dependent direct effect: the more diluted the sealer, the less cytotoxic. Regarding the angioblastic proliferation and edema, difference between the sealers at 7 and 63 days occurred (p < 0.05). Both endodontic sealers initially promoted perimaterial tissue reaction as a foreign body granuloma and thus stimulated favorable tissue responses.

CONCLUSIONS

Both sealers showed a dose-dependent effect and promoted satisfactory subcutaneous tissue response; the sealer Sealapex Xpress was less cytotoxic and more biocompatible than RealSeal XT.

CLINICAL RELEVANCE

The step of root canal filling during endodontic treatment is highly important for the preservation of the periapical tissue integrity. Subcutaneous reaction to endodontic sealers enables scientific basis for clinical use.

Temperature Changes on External Root Surfaces with the Use of Several Thermoplastic Filling Techniques

INTRODUCTION

The purpose of this study was to measure the temperature rise on the external root surface of filled root canals using Touch'n Heat (Analytic Endodontics, Orange, CA), the TC System (TC; Tanaka de Castro & Minatel Ltda, Cascavel, PR, Brazil), and the Tagger technique.

METHODS

Forty-five single-canal mandibular premolar human teeth were used in the 3 experimental groups. The root canals were enlarged to accommodate up to an R40 Reciproc file (VDW, Munich, Germany). Next, the specimens were filled according to the technique evaluated. The measurement of the temperature was performed by K chromium-aluminum thermocouples attached to the coronal, middle, and apical root levels.

RESULTS

There was a significant difference among the 3 techniques (P < .001) in relation to the temperature variation between the highest temperature and the initial temperature. The highest temperature change was found with the Tagger technique at the middle third root level (11.8°C), and the lowest variation was in TC at the cervical third (2.05°C).

CONCLUSIONS

There was a rise of temperature on the external root surface for all of the techniques evaluated. TC showed the lowest temperature rise.

A Comparative Evaluation of Efficacy of Different Obturation Techniques used in Root Canal Treatment of Anterior Teeth: An in vitro Study

Aim: This study was undertaken to evaluate the percentage of gutta-percha-filled area (PGFA) using microscopic analysis of the cross-sections in the apical third of root canals when filled either with Thermafil technique, Warm Vertical Condensation technique and Cold Lateral Condensation technique without using sealers.

Materials and methods: Sixty single rooted extracted per-manent teeth were collected. After crown amputation, the teeth were randomly divided into three experimental groups of 20 specimens each. Group I–Thermafil obturation technique, group II–warm vertical condensation obturation technique and group III–cold lateral condensation obturation technique. Obturation was performed by specific techniques without using sealers. After obturation, the teeth were cross-sectioned horizontally at 2 to 3 mm from apex with the help of double sided diamond disk. Sections were digitally photographed and measured under Stereomicroscope at magnification of 50×.

Using a KS 100 imaging system the area of canals and the gutta-percha was recorded, also the percentage of gutta-percha filled area (PGFA) was calculated. The observations thus ob-tained were subjected to statistical analysis using ANOVA and student ‘t’ test.

Results: Maximum group difference was observed between groups I and III (3.558 ± 0.138) while minimum difference was observed between groups I and II (1.223 ± 0.137). Thus, all the between group differences were statistically significant.

Conclusion: This study supports the belief that the Thermafil Obturation technique produces significantly higher percentage of gutta-percha filled area (PGFA) than the warm vertical condensation technique or cold lateral condensation technique.

How to cite this article: Samadi F, Jaiswal JN, Saha S, Garg N, Chowdhary S, Samadi F, Tripathi VP. A Comparative Evaluation of Efficacy of Different Obturation Techniques used in Root Canal Treatment of Anterior Teeth: An in vitro Study. Int J Clin Pediatr Dent 2014;7(1):1-5.

Influence of the Method in Root Canal Filling Using Active Lateral Compaction Techniques

The aim of this study was to evaluate, by stereomicroscopy and confocal laser microscopy, the influence of different lateral compaction methods for the obturation quality, as well as the time spent for the procedure. Thirty root canals of freshly extracted single-rooted human teeth were prepared with the ProTaper system up to F5 instrument and filled with gutta-percha and AH Plus sealer by the lateral compaction technique. The teeth were divided into 3 groups (n=10) in accordance with the method used for the lateral compaction, as follows: Manual, Mechanical and Ultrasonic. The sealers were stained with rhodamine B dye in a proportion of 0.1% per gram in weight to allow for the analysis under a confocal microscope. During the root filling procedure, the time spent was recorded with a stopwatch. The specimens were stored at 37 °C for 48 h, and then sectioned at 2, 4 and 6 mm from the apex. The percentage of gutta-percha, sealer and void areas were evaluated using a stereomicroscope and sealer penetration perimeter by confocal laser microscope. Statistical analyses were performed using the Kruskall-Wallis and Dunn tests (p<0.05). The mechanical method required a shorter time for the lateral compaction than the manual method (p<0.05). There were no significant differences (p>0.05) for the perimeter of the dentin with sealer penetration among all groups. The mechanical method showed a higher (p<0.05) percentage of gutta-percha and less sealer at the 4 mm section in comparison with the manual method. The ultrasonic group showed intermediate values. The void areas found in the root filling were similar (p>0.05) between the three methods. In conclusion, the fastest lateral compaction was achieved with the mechanical method, and all the methods showed void areas in the root filling.

Root Canal Filling: Fracture Strength of Fiber-Reinforced Composite-Restored Roots and Finite Element Analysis

The aims of this study were to evaluate the effect of root canal filling techniques on root fracture resistance and to analyze, by finite element analysis (FEA), the expansion of the endodontic sealer in two different root canal techniques. Thirty single-rooted human teeth were instrumented with rotary files to a standardized working length of 14 mm. The specimens were embedded in acrylic resin using plastic cylinders as molds, and allocated into 3 groups (n=10): G(lateral) - lateral condensation; G(single-cone) - single cone; G(tagger) - Tagger's hybrid technique. The root canals were prepared to a length of 11 mm with the #3 preparation bur of a tapered glass fiber-reinforced composite post system. All roots received glass fiber posts, which were adhesively cemented and a composite resin core was built. All groups were subjected to a fracture strength test (1 mm/min, 45°). Data were analyzed statistically by one-way ANOVA with a significance level of 5%. FEA was performed using two models: one simulated lateral condensation and Tagger's hybrid technique, and the other one simulated the single-cone technique. The second model was designed with an amount of gutta-percha two times smaller and a sealer layer two times thicker than the first model. The results were analyzed using von Mises stress criteria. One-way ANOVA indicated that the root canal filling technique affected the fracture strength (p=0.004). The G(lateral) and G(tagger) produced similar fracture strength values, while G(single-cone) showed the lowest values. The FEA showed that the single-cone model generated higher stress in the root canal walls. Sealer thickness seems to influence the fracture strength of restored endodontically treated teeth.

Push-out strength of root fillings with or without thermomechanical compaction

AIM

To evaluate the influence of thermomechanical compaction (Tagger's hybrid technique - THT) on the push-out strength of several root filling materials to root dentine.

METHODOLOGY

Root canals of eighty roots in human canines were prepared with the ProTaper system and filled with one of the following materials, using either lateral compaction (LC) (n = 40) or THT (n = 40): AH Plus/gutta-percha (GP) (n = 10), Sealer 26/GP (n = 10), Epiphany SE/Resilon (n = 10) and Epiphany SE/GP (n = 10). Three 2-mm-thick dentine slices were obtained from each third of each root. The root filling in the first slice was subjected to a push-out test to evaluate the bond strength of the materials to intraradicular dentine. Data (in MPa) were analysed using anova and post hoc Tukey's test (P < 0.05). Failure mode was determined at × 25 magnification. The other two slices were prepared for scanning electron microscopy (SEM) to examine the surface of the filling materials.

RESULTS

Lateral compaction (1.34 ± 1.14 MPa) was associated with a significantly higher bond strength (P < 0.05) than the THT (0.97 ± 0.88 MPa). AH Plus/GP (2.23 ± 0.83 MPa) and Sealer 26/GP (1.86 ± 0.50 MPa) had significantly higher bond strengths than the other materials and differed significantly from each other (P < 0.05). There was a significant difference (P < 0.05) between the coronal (1.36 ± 1.15 MPa), middle (1.14 ± 1.05 MPa) and apical thirds (0.95 ± 0.83 MPa). Considering the technique and root filling material interaction, AH Plus/GP-LC was associated with the highest mean values (2.65 ± 0.66 MPa) (P < 0.05). Sealer 26/GP-LC (2.10 ± 0.46 MPa), AH Plus/GP-THT (1.81 ± 0.78 MPa) and Sealer 26/GP-TH (1.63 ± 0.44 MPa) had intermediate values that were not significantly different from each other (P > 0.05). Epiphany SE was associated with the lowest mean values (3.70 ± 0.86 MPa) (P < 0.05), regardless of the root filling technique and type of solid material (cone). Adhesive failures predominated in the specimens filled with Epiphany SE, whilst mixed and cohesive failures were more frequent in those filled with AH Plus and Sealer 26, regardless of the root filling technique. SEM analysis revealed that LC produced a dense and well-compacted filling whilst the use of a hybrid thermomechanical technique resulted in the solid material (GP or Resilon) intermingled within sealer to form a nonhomogenous mass.

CONCLUSION

Lateral compaction was associated with higher bond strengths of the materials to intraradicular dentine than a hybrid technique using thermomechanical compaction. The greatest push-out strengths were obtained when the canals were filled with LC of AH Plus and GP cones.

Interfacial adaptation of an epoxy-resin sealer and a self-etch sealer to root canal dentin using the System B or the single cone technique

The aim of this laboratory study was to compare the interfacial adaptation of an epoxy-resin and a self-etch sealer in mesial root canals of mandibular molars filled using the System-B/Elements Obturation Unit. Sixty mesial root canals of mandibular molars were prepared using the K3 rotary system up to 35.04 instrument and then filled with the aid of the System-B/Elements Obturation Unit using either gutta-percha/ThermaSeal Plus (n=15) or Resilon/Real Seal SE (n=15). The single cone technique using both materials was used as control. The sealers were stained with Rhodamine B dye and the teeth were filled and sectioned at 2, 4 and 6 mm from the apex. The interfacial marginal adaptation of sealers was evaluated using confocal microscopy. Statistical analyses were performed by the Kruskall-Wallis test (α=0.05). In general, microscopic analysis showed a quite regular gap distribution pattern at sealer-dentin interfaces, mainly for the two groups filled with Real Seal SE. This means that both nonbonding root-filling groups (ThermaSeal Plus) showed significantly higher amount of gap-free regions regardless of the filling technique (p<0.05). Better marginal adaptation was obtained with gutta-percha and epoxy resin-based sealer using either the system B or the single cone technique.