Simultaneous Determination of Choline and Acetylcholine Based on a Trienzyme Chemiluminometric Biosensor in a Single Line Flow Injection System

Novel Carbon/PEDOT/PSS-Based Screen-Printed Biosensors for Acetylcholine Neurotransmitter and Acetylcholinesterase Detection in Human Serum

New reliable and robust potentiometric ion-selective electrodes were fabricated using poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) as the solid contact between the sensing membrane and electrical substrate for an acetylcholine (ACh) bioassay. A film of PEDOT/PSS was deposited on a solid carbon screen-printed platform made from ceramic substrate. The selective materials used in the ion-selective electrode (ISE) sensor membrane were acetylcholinium tetraphenylborate (ACh/TPB/PEDOT/PSS-ISE) (sensor I) and triacetyl-β-cyclodextrin (β-CD/PEDOT/PSS-ISE) (sensor II). The sensors revealed clear enhanced Nernstian response with a cationic slope 56.4 ± 0.6 and 55.3 ± 1.1 mV/decade toward (ACh⁺) ions over the dynamic linear range 1.0 × 10⁻⁶–1 × 10⁻³ and 2.0 × 10⁻⁶–1.0 × 10⁻³ M at pH 5 with limits of detection 2.0 × 10⁻⁷ and 3.2 × 10⁻⁷ M for sensors I and II, respectively. The selectivity behavior of both sensors was also tested and the sensors showed a significant high selectivity toward ACh⁺ over different common organic and inorganic cations. The stability of the potential response for the solid-contact (SC)/ISEs was evaluated using a chronopotentiometric method and compared with that of electrodes prepared without adding the solid-contact material (PEDOT/PSS). Enhanced accuracy, excellent repeatability, good reproducibility, potential stability, and high selectivity and sensitivity were introduced by these cost-effective sensors. The sensors were also used to measure the activity of acetylcholinesterase (AChE). A linear plot between the initial rate of the hydrolysis of ACh⁺ substrate and enzyme activity held 5.0 × 10⁻³–5.2 IU L⁻¹ of AChE enzyme. Application to acetylcholine determination in human serum was done and the results were compared with the standard colorimetric method.

Enzyme mimics of Au/Ag nanoparticles for fluorescent detection of acetylcholine

We have developed a highly sensitive and selective fluorescent assay for the detection of acetylcholine (ACh) based on enzyme mimics of Au/Ag nanoparticles (NPs). These NPs were prepared via a one-step solution phase reaction between 13 nm Au NPs and Ag(+) ions in the presence of stabilizing agents such as adenosine triphosphate (ATP) and polyethylene glycol (PEG). Our sensing strategy involves reacting ACh with acetylcholinesterase (AChE) to form choline that is in turn oxidized by choline oxidase (ChOx) to produce betaine and H(2)O(2), which reacts with Amplex UltraRed (AUR) in the presence of bimetallic NPs catalyst to form a fluorescent product. The fluorescence intensity (excitation/emission wavelengths of 540/592 nm) is proportional to the concentration of ACh over a range of 1-100 nM (R(2) = 0.998), with a limit of detection of 0.21 nM (signal/noise = 3). When compared with Au NPs and horseradish peroxidase, the Au/Ag NPs provide 150- and 115-fold higher catalytic activity toward the H(2)O(2)-mediated AUR reaction. The practicality of the assay has been validated by determining the concentrations of ACh in plasma and blood samples, with results of 2.69 ± 0.84 nM (n = 5) and 6.75 ± 1.42 nM (n = 5), respectively. Thus, the present assay holds great potential for the analysis of ACh in biological samples.

Multienzyme microbiosensor based on electropolymerized o-phenylenediamine for simultaneous in vitro determination of acetylcholine and choline

The electrochemical biosensors based on poly(o-phenylenediamine) (PoPD) and acetylcholinesterase (AChE) and choline oxidase (ChO) enzymes were fabricated on carbon fibre (CF) substrate. The electropolymerized PoPD was used to reduce the interfering substances. The electrode assembly was completed by depositing functionalized carbon nano tubes (FCNTs) and Nafion (Naf). Amperometric detection of acetylcholine (ACh) and choline (Ch) were realized at an applied potential of +750 mV vs Ag/AgCl (saturated KCl). At pH 7.4, the final assembly, Naf-FCNTs/AChE-ChO((10:1))/PoPD/CF(Elip), was observed to have high sensitivity towards Ch (6.3±0.3 μA mM(-1)) and ACh (5.8±0.3 μA mM(-1)), linear range for Ch (K(M)=0.52±0.03 mM) and ACh (K(M)=0.59±0.07 mM), and for Ch the highest ascorbic acid blocking capacity (97.2±2 1mM AA). It had a response time of <5s and with 0.045 μM limit of detection. Studies on different ratio (ACh/Ch) revealed that 10:1, gave best overall response.

Rapid high-throughput detection of peroxide with an acridinium-9-carboxamide: A homogeneous chemiluminescent assay for plasma choline

Hydrogen peroxide generated from the enzymatic oxidation of choline was detected using a chemiluminescent acridinium-9-carboxamide. The dose-response for choline (0-50 microM) was established in buffer and was applicable to the quantification of choline in human plasma. This homogeneous assay was performed in a 96-well microplate format and required minimal sample volume (1 microL) and analysis time (<5 s per well).