Calculation of baculovirus titer using a microfluidic-based bioanalyzer

Rapid and cost-effective baculovirus sample preparation method as a viable alternative to conventional preparation for quantitative real-time PCR

The increasing use of the baculovirus expression vector system (BEVS) has generated significant interest into techniques for quantifying baculovirus stocks. One method involves the use of quantitative real-time polymerase chain reaction (PCR). This study investigated simplifying baculovirus sample preparation for quantitative Real Time PCR to provide an alternative to current kit-based preparation methods. To achieve this goal, combinations of freeze/thaw cycles and Triton X-100 treatment were investigated. A treatment with only Triton X-100 was found to be sufficient to provide a simple, rapid and cheap alternative to kit-based preparation methods. This study also examined other factors such as primer choice to further examine the process of baculovirus quantitation by qPCR.

Optimization of expression conditions for production of anti-colorectal cancer monoclonal antibody CO17-1A in baculovirus-insect cell system

The baculovirus-insect cell system is considered a feasible expression system for recombinant glycoprotein production due to its several advantages, including high capacity, flexibility, and glycosylation capability. However, accurate titering of the recombinant baculovirus is required to ensure high expression in insect cells using a commercial and expensive immunoassay titer kit in which the envelope glycoprotein of the Autographa californica multiple nucleopolyhedrovirus (AcMNPV)-type baculovirus is detected by anti-envelope glycoprotein antibody and a secondary antibody conjugated to horseradish peroxidase (HRP). In this study, conditions for the expression of the CO17-1A immunotherapeutic monoclonal antibody (MAb) against colorectal cancer cells in a baculovirus system were optimized without using a commercial titering kit. Several variables were investigated to optimize antibody expression in a baculovirus-insect cell system, including baculovirus passage, volume of the infecting baculovirus inoculum (100, 200, 400, and 800 μL), and the harvest time of insect cells or cell supernatants after virus infection (24, 48, and 72 h). Two different pFastBac vectors carrying the CO17-1A MAb genes with or without the KDEL endoplasmic reticulum (ER) retention motif (Lys-Asp-Glu-Leu) fused to the HC (MAb CO17-1A K and MAb CO17-1A, respectively) were constructed and used to generate baculoviruses. Immunoblot analysis was conducted to confirm expression of MAb CO17-1A K and MAb CO17-1A in baculovirus-infected insect cells. Densitometry analysis of the protein bands was used to quantify the relative expression under different conditions. The highest expression was observed in lysed cells infected with 400 μL of passage 3 baculovirus (P(3) BV) carrying the gene encoding the CO17-1A MAb without KDEL at 72 h after virus infection. These results suggest that the infection conditions, the number of virus passages, baculovirus inoculum volume, and the harvest time can be modified to optimize MAb expression without using a BaculoELISA titer kit in a baculovirus-insect cell system.

High-throughput insect cell protein expression applications

The Baculovirus Expression Vector System (BEVS) is one of the most efficient systems for production of recombinant proteins and consequently its application is wide-spread in industry as well as in academia. Since the early 1970s, when the first stable insect cell lines were established and the infectivity of bacu-lovirus in an in vitro culture system was demonstrated (1, 2), virtually thousands of reports have been published on the successful expression of proteins using this system as well as on method improvement. However, despite its popularity the system is labor intensive and time consuming. Moreover, adaptation of the system to multi-parallel (high-throughput) expression is much more difficult to achieve than with E. coli due to its far more complex nature. However, recent years have seen the development of strategies that have greatly enhanced the stream-lining and speed of baculovirus protein expression for increased throughput via use of automation and miniaturization. This chapter therefore tries to collate these developments in a series of protocols (which are modifications to standard procedure plus several new approaches) that will allow the user to expedite the speed and throughput of baculovirus-mediated protein expression and facilitate true multi-parallel, high-throughput protein expression profiling in insect cells. In addition we also provide a series of optimized protocols for small and large-scale transient insect cell expression that allow for both the rapid analysis of multiple constructs and the concomitant scale-up of those selected for on-going analysis. Since this approach is independent of viral propagation, the timelines for this approach are markedly shorter and offer a significant advantage over standard bacu-lovirus expression approach strategies in the context of HT applications.

High-Throughput Protein Production (HTPP): a review of enabling technologies to expedite protein production

Recombinant protein production plays a crucial role in the drug discovery process, contributing to several key stages of the pathway. These include exploratory research, target validation, high-throughput screening (HTS), selectivity screens, and structural biology studies. Therefore the quick and rapid production of high-quality recombinant proteins is a critical component of the successful development of therapeutic small molecule inhibitors. This chapter will therefore attempt to provide an overview of some of the current "best-in-class" cloning, expression, and purification strategies currently available that enhance protein production capabilities and enable greater throughput. As such the chapter should also enable a reader with limited understanding of the high-throughput protein production (HTPP) process with the necessary information to set up and equip a laboratory for multiparallel protein production.

Quantitative real-time PCR for rapid and accurate titration of recombinant baculovirus particles

We describe the use of quantitative PCR (QPCR) to titer recombinant baculoviruses. Custom primers and probe were designed to gp64 and used to calculate a standard curve of QPCR derived titers from dilutions of a previously titrated baculovirus stock. Each dilution was titrated by both plaque assay and QPCR, producing a consistent and reproducible inverse relationship between C(T) and plaque forming units per milliliter. No significant difference was observed between titers produced by QPCR and plaque assay for 12 recombinant viruses, confirming the validity of this technique as a rapid and accurate method of baculovirus titration.

Estimation of baculovirus titer based on viable cell size

In this paper, a simple and rapid protocol for determination of baculovirus titers based on increasing viable insect cell size/diameter following virus infection is presented. There are different methods available for determining virus titers such as plaque assays end-point dilution, quantitative real-time polymerase chain reaction and flow cytometry. However, most of these methods are time consuming and labor intensive. The titer estimation method presented here can be completed in approximately 28 h from start to finish. In this method, the Vi-CELL (Beckman Coulter) was used to measure cell diameter change over a range of virus dilutions, following infection. The cell diameter change data were used to compute the virus titer using a statistical method called the method of moments that we have described previously.

A rapid method for estimation of baculovirus titer based on viable cell size

Baculovirus protein expression system is a powerful tool for producing recombinant proteins. To optimize conditions for efficient recombinant protein expression, it is important to determine titer of virus stock for arriving at an optimal multiplicity of infection (MOI) that maximizes recombinant protein expression. Traditionally plaque assays have been used for titer determination. Other methods such as endpoint dilution, quantitative real-time polymerase chain reaction and flow cytometry have been developed to aid the determination of virus titers. However, most of these methods are time-consuming and labor intensive. In this regard, a simple and rapid method for determination of virus titers based on the cytopathic effects that lead to viable cell size increase following virus infection is presented in this paper. In this study, the Vi-CELL (Beckman Coulter) was used to measure cell-diameter over a range of virus dilutions, following infection. Applying statistical modeling techniques, the viable cell-diameter data was used to estimate the virus titer. The results indicated that the viable cell-diameter based titer estimation to be reliable and comparable to titers determined by the traditional plaque assay.

Optimisation of insect cell growth in deep-well blocks: development of a high-throughput insect cell expression screen

This report describes a method to culture insects cells in 24 deep-well blocks for the routine small-scale optimisation of baculovirus-mediated protein expression experiments. Miniaturisation of this process provides the necessary reduction in terms of resource allocation, reagents, and labour to allow extensive and rapid optimisation of expression conditions, with the concomitant reduction in lead-time before commencement of large-scale bioreactor experiments. This therefore greatly simplifies the optimisation process and allows the use of liquid handling robotics in much of the initial optimisation stages of the process, thereby greatly increasing the throughput of the laboratory. We present several examples of the use of deep-well block expression studies in the optimisation of therapeutically relevant protein targets. We also discuss how the enhanced throughput offered by this approach can be adapted to robotic handling systems and the implications this has on the capacity to conduct multi-parallel protein expression studies.

From gene to protein: a review of new and enabling technologies for multi-parallel protein expression

In the post-genomic era, increasingly greater demands and expectations are being placed on protein production laboratories to produce more proteins and in faster timelines. This has been coupled with an exponential increase in the number of requests for the production of proteins which lack structural and functional information. No longer can groups use literature available in the public domain solely to drive their expression strategy, and moreover current expression and concomitant purification strategies clearly do not meet modern-day demands for protein production. This review will therefore attempt to provide a definitive review of current 'best in class' cloning, expression and purification systems, and the adaptations and developments that have been made by laboratories, both academic and industrial, to enhance protein production throughput.