Influence of biologically inspired nanometer surface roughness on antigen-antibody interactions for immunoassay-biosensor applications

An Impedance-Based Immunosensor for the Detection of Ovalbumin in White Wine

Food allergies are an exceptional response of the immune system caused by the ingestion of specific foods. The main foods responsible for allergic reactions are milk, eggs, seafood, soy, peanuts, tree nuts, wheat, and their derived products. Chicken egg ovalbumin (OVA), a common allergen molecule, is often used for the clarification process of wine. Traces of OVA remain in the wine during the fining process, and they can cause significant allergic reactions in sensitive consumers. Consequently, the European Food Safety Authority (EFSA) and the American Food and Drug Administration (FDA) have shown the risks for allergic people to assume allergenic foods and food ingredients, including eggs. Commonly, OVA detection requires sophisticated and time-consuming analytical techniques. Intending to develop a faster assay, we designed a proof-of-concept non-Faradaic impedimetric immunosensor for monitoring the presence of OVA in wine. Polyclonal antibodies anti-OVA were covalently immobilised onto an 11-mercaptoundecanoic-acid (11-MUA)-modified gold surface. The developed immunosensor was able to detect OVA in diluted white wine without the need for an external probe or any pre-treatment step with a sensitivity of 0.20 µg/mL, complying with the limit established by the resolution OIV/COMEX 502-2012 for the quantification of allergens in wine.

Square wave voltammetric approach to leptin immunosensing and optimization of driving parameters with chemometrics

Square wave voltammetry serves as an effective analytical means to evaluate antigen-antibody coupling at the solid-liquid interface. Herein, we describe 3-aminopropyltrimethoxysilane (APTMS) induced irreversible immobilization of anti-leptin to micellar gold nanoparticles (AuNPs). Antibodies (Abs) were orthogonally loaded on micellized AuNP assemblies via amino residual groups. The ratio of bound Ab molecules was determined by the Bradford assay. The AuNP/Ab layer modified electrodes with variable antibody surface coverage (∼400 ± 55-200 ± 30 Ab/NP) were analyzed in terms of change in backward, net current (Ip) components. The rate of antigen coupling was found to be consistent with the variation in antibody density as well as the binding affinity. The lowest detection limit was observed at the femtomolar level (0.25 fM/mL) over a wide range of antigen concentration (6.2 ng/mL to 0.12 fg/mL). The variables affecting the epitope-paratope interaction were further optimized using a chemometric approach and a response surface methodology (RSM).

Cell Membrane Nanostructure is Altered by Heat-Induced Antigen Retrieval: A Possible Consequence for Immunocytochemical Detection of Membranous Antigens

Heat-induced antigen retrieval (HIAR) treatment improves the antigen immunodetection in formalin-fixed, paraffin-embedded tissue samples and it can also improve the detection of intracellular antigens in alcohol-fixed cytological samples, although it could deleteriously impact immunodetection, particularly that of membranous antigens. We examined the differences in cell surface topography on MCF7 cells fixed in methanol/acetone (M/A) or 4% paraformaldehyde (4% PFA), as well as the changes caused by HIAR treatment at three different temperatures (60, 90, and 120°C), using atomic force microscopy. Furthermore, the consequences for immunostaining of five membranous antigens [epidermal growth factor receptor (EGFR), E-cadherin, CD9, CD24, and CD44] were examined. Our results illustrate that while there was no one single optimal immunostaining condition for the tested antibodies, the surface topography could be an important factor in successful staining. Generally, the best conditions for successful immunostaining were M/A fixation with no HIAR treatment, whereas in 4% PFA-fixed cells, HIAR treatment at 120°C was optimal. These conditions showed similarity in cell surface skewness. A correlation factor between successful immunocytochemical staining and the skewness parameter was 0.8000. Our results indicate that the presence of valleys, depressions, scratches, and pits on the cell surface is unfavorable for the successful immunodetection of cell surface antigens.

Uniformly spaced nanoscale cracks in nanoparticle films deposited by convective assembly

Rapid convective deposition is used to assemble nanoparticle coatings from suspension, with controllable thickness. Varying film thickness generates stress-induced linear cracks with highly monodisperse spacing. Film thickness is controlled through mechanical means, suspension volume fraction, and the use of applied thermal gradients. These cracks extend in the deposition direction, and a uniform crack spacing from 2 to 160μm is observed. The nanoparticle film thickness is the relevant length scale for hydrodynamic flow, and films will crack with this spacing, in a characteristic manner to minimize the system energy and capillary stresses. As expected from this energy minimization problem and relevant theory, the correlation between coating thickness and crack spacing is highly linear. Because this process is continuous, continuous cracks have potential as a high-throughput method of fabricating nanoscale channels for microfluidics and MEMS.

Fructose-enhanced reduction of bacterial growth on nanorough surfaces

Patients on mechanical ventilators for extended periods of time often face the risk of developing ventilator-associated pneumonia. During the ventilation process, patients incapable of breathing are intubated with polyvinyl chloride (PVC) endotracheal tubes (ETTs). PVC ETTs provide surfaces where bacteria can attach and proliferate from the contaminated oropharyngeal space to the sterile bronchoalveolar area. To overcome this problem, ETTs can be coated with antimicrobial agents. However, such coatings may easily delaminate during use. Recently, it has been shown that changes in material topography at the nanometer level can provide antibacterial properties. In addition, some metabolites, such as fructose, have been found to increase the efficiency of antibiotics used to treat Staphylococcus aureus (S. aureus) infections. In this study, we combined the antibacterial effect of nanorough ETT topographies with sugar metabolites to decrease bacterial growth and biofilm formation on ETTs. We present for the first time that the presence of fructose on the nanorough surfaces decreases the number of planktonic S. aureus bacteria in the solution and biofilm formation on the surface after 24 hours. We thus envision that this method has the potential to impact the future of surface engineering of biomaterials leading to more successful clinical outcomes in terms of longer ETT lifetimes, minimized infections, and decreased antibiotic usage; all of which can decrease the presence of antibiotic resistant bacteria in the clinical setting.

Highly adherent bioactive glass thin films synthetized by magnetron sputtering at low temperature

Thin (380-510 nm) films of a low silica content bioglass with MgO, B(2)O(3), and CaF(2) as additives were deposited at low-temperature (150°C) by radio-frequency magnetron sputtering onto titanium substrates. The influence of sputtering conditions on morphology, structure, composition, bonding strength and in vitro bioactivity of sputtered bioglass films was investigated. Excellent pull-out adherence (~73 MPa) was obtained when using a 0.3 Pa argon sputtering pressure (BG-a). The adherence declined (~46 MPa) upon increasing the working pressure to 0.4 Pa (BG-b) or when using a reactive gas mixture (~50 MPa). The SBF tests clearly demonstrated strong biomineralization features for all bioglass sputtered films. The biomineralization rate increased from BG-a to BG-b, and yet more for BG-c. A well-crystallized calcium hydrogen phosphate-like phase was observed after 3 and 15 days of immersion in SBF in all bioglass layers, which transformed monotonously into hydroxyapatite under prolonged SBF immersion. Alkali and alkali-earth salts (NaCl, KCl and CaCO(3)) were also found at the surface of samples soaked in SBF for 30 days. The study indicated that features such as composition, structure, adherence and bioactivity of bioglass films can be tailored simply by altering the magnetron sputtering working conditions, proving that this less explored technique is a promising alternative for preparing implant-type coatings.

Shrink-induced single-cell plastic microwell array

The ability to interrogate and track single cells over time in a high-throughput format would provide critical information for fundamental biological understanding of processes and for various applications, including drug screening and toxicology. We have developed an ultrarapid and simple method to create single-cell wells of controllable diameter and depth with commodity shrink-wrap film and tape. Using a programmable CO(2) laser, we cut hole arrays into the tape. The tape then serves as a shadow mask to selectively etch wells into commodity shrink-wrap film by O(2) plasma. When the shrink-wrap film retracts upon briefly heating, high-aspect plastic microwell arrays with diameters down to 20 μm are readily achieved. We calibrated the loading procedure with fluorescent microbeads. Finally, we demonstrate the utility of the wells by loading fluorescently labeled single human embryonic stem cells into the wells.

Effect of surface nanotopography on immunoaffinity cell capture in microfluidic devices

Immunoaffinity microfluidic devices have recently become a popular choice to isolate specific cells for many applications. To increase cell capture efficiency, several groups have employed capture beds with nanotopography. However, no systematic study has been performed to quantitatively correlate surface nanopatterns with immunoaffinity cell immobilization. In this work, we controlled substrate topography by depositing close-packed arrays of silica nanobeads with uniform diameters ranging from 100 to 1150 nm onto flat glass. These surfaces were functionalized with a specific antibody and assembled as the base in microfluidic channels, which were then used to capture CD4+ T cells under continuous flow. It is observed that capture efficiency generally increases with nanoparticle size under low flow rate. At higher flow rates, cell capture efficiency becomes increasingly complex; it initially increases with the bead size then gradually decreases. Surprisingly, capture yield plummets atop depositions of some particle diameters. These dips likely stem from dynamic interactions between nanostructures on the substrate and cell membrane as indicated by roughness-insensitive cell capture after glutaraldehyde fixing. This systematic study of surface nanotopography and cell capture efficiency will help optimize the physical properties of microfluidic capture beds for cell isolation from biological fluids.

An alternative pathway for alphavirus entry

The study of alphavirus entry has been complicated by an inability to clearly identify a receptor and by experiments which only tangentially and indirectly examine the process, producing results that are difficult to interpret. The mechanism of entry has been widely accepted to be by endocytosis followed by acidification of the endosome resulting in virus membrane-endosome membrane fusion. This mechanism has come under scrutiny as better purification protocols and improved methods of analysis have been brought to the study. Results have been obtained that suggest alphaviruses infect cells directly at the plasma membrane without the involvement of endocytosis, exposure to acid pH, or membrane fusion. In this review we compare the data which support the two models and make the case for an alternative pathway of entry by alphaviruses.

Plasma-based surface modification of polystyrene microtiter plates for covalent immobilization of biomolecules

In recent years, polymer surfaces have become increasingly popular for biomolecule attachment because of their relatively low cost and desirable bulk physicochemical characteristics. However, the chemical inertness of some polymer surfaces poses an obstacle to more expansive implementation of polymer materials in bioanalytical applications. We describe use of argon plasma to generate reactive hydroxyl moieties at the surface of polystyrene microtiter plates. The plates are then selectively functionalized with silanes and cross-linkers suitable for the covalent immobilization of biomolecules. This plasma-based method for microtiter plate functionalization was evaluated after each step by X-ray photoelectron spectroscopy, water contact angle analysis, atomic force microscopy, and bioimmobilization efficacy. We further demonstrate that the plasma treatment followed by silane derivatization supports direct, covalent immobilization of biomolecules on microtiter plates and thus overcomes challenging issues typically associated with simple physisorption. Importantly, biomolecules covalently immobilized onto microtiter plates using this plasma-based method retained functionality and demonstrated attachment efficiency comparable to commercial preactivated microtiter plates.

Critical aspects of biointerface design and their impact on biosensor development

The stable integration of a biological recognition element on a transducing substrate surface is the single most important step in the creation of a high-functioning sensor surface. The key factors affecting biotic and abiotic functionalities at the biointerface are both chemical and physical. Understanding the interactions between biomolecules and surfaces, and their emergent complexity, is critical for biointerface implementation for sensing applications. In this overview, we highlight materials and methods typically used for biosensor development. Particular emphasis has been given to the experimental evaluation of biointerfacial properties and functionality. Promising research directions for application of biointerfaces to biosensing are suggested.

Bayesian analysis of heterogeneity in the distribution of binding properties of immobilized surface sites

Once a homogeneous ensemble of a protein ligand is taken from solution and immobilized to a surface, for many reasons the resulting ensemble of surface binding sites to soluble analytes may be heterogeneous. For example, this can be due to the intrinsic surface roughness causing variations in the local microenvironment, nonuniform density distribution of polymeric linkers, or nonuniform chemical attachment producing different protein orientations and conformations. We previously described a computational method for determining the distribution of affinity and rate constants of surface sites from analysis of experimental surface binding data. It fully exploits the high signal/noise ratio and reproducibility provided by optical biosensor technology, such as surface plasmon resonance. Since the computational analysis is ill conditioned, the previous approach used a regularization strategy assuming a priori all binding parameters to be equally likely, resulting in the broadest possible parameter distribution consistent with the experimental data. We now extended this method in a Bayesian approach to incorporate the opposite assumption, i.e., that the surface sites a priori are expected to be uniform (as one would expect in free solution). This results in a distribution of binding parameters as close to monodispersity as possible given the experimental data. Using several model protein systems immobilized on a carboxymethyl dextran surface and probed with surface plasmon resonance, we show microheterogeneity of the surface sites in addition to broad populations of significantly altered affinity. The distributions obtained are highly reproducible. Immobilization conditions and the total surface density of immobilized sites can have a substantial impact on the functional distribution of the binding sites.