Hydrazinolyzed cellulose-g-polymethyl acrylate as adsorbent for efficient removal of Cd(II) and Pb(II) ions from aqueous solution

Kinetics and mechanism of efficient removal of Cu(II) ions from aqueous solutions using ethylenediamine functionalized cellulose sponge

The present work elucidates achieving superior Cu(II) adsorption capacity using a facile protocol and a biodegradable material. Copper is one of the most prevalent metals used in industries, which creates severe health effects to the human and aquatic lives when present in excess. Cellulose sponge (CS) used as kitchen wipe was chosen and amine functionalities were introduced on it using ethylenediamine. Potentiality of the amine functionalized cellulose sponge (AF-CS) in Cu(II) removal is investigated for the first time. The batch adsorption parameters were optimized and various nonlinear kinetic and isotherm models were elaborately studied. The adsorption using CS and AF-CS behaved under a pseudo-second-order model and followed chemisorption. The maximum adsorption capacity values using AF-CS and CS from the Langmuir isotherm model were calculated to be 596.96 mg/g and 230.63 mg/g, respectively. Thence, AF-CS possesses proportionately higher adsorption capacity in comparison with CS due to the insertion of -NH₂ groups. Further, the mechanism involved in the adsorption process was explored in detail through FESEM, FT-IR, FT-Raman and TGA analysis. The AF-CS sponge was stable on repeated use and retained 90% efficiency at the end of the 10th cycle. A highly effective, easily recyclable, biodegradable and cost-effective adsorbent has been synthesized possessing an extraordinarily high adsorption capacity towards Cu(II) ions.

Adsorption performance and mechanisms of Pb(II), Cd(II), and Mn(II) removal by a β-cyclodextrin derivative

In this study, the novel adsorbent PVA-TA-βCD was synthesized via thermal cross-linking between polyvinyl alcohol and β-cyclodextrin. The characterization methods SEM-EDS, FTIR, and XPS were adopted to characterize the adsorbent. The effect of pH, contact time, initial concentrations, and temperature during the adsorption of Pb(II), Cd(II), and Mn(II) onto the PVA-TA-βCD was also investigated. In a single-component system, the data fitted well to pseudo-second-order, and film diffusion and intra-particle diffusion both played important roles in the adsorption process. As for isotherm study, it showed a heterogeneous adsorption capacity of 199.11, 116.52, and 90.28 mg g^-1 for the Pb(II), Cd(II), and Mn(II), respectively. Competition between the ions existed in a multi-component system; however, owing to the stronger affinity of the PVA-TA-βCD for Pb(II) relative to Cd(II) and Mn(II), the Pb(II) adsorption onto the PVA-TA-βCD was less affected by the addition of the other metals, which could be effectively explained by the hard and soft acid and base theory (HSAB). Furthermore, PVA-TA-βCD showed good reusability throughout regeneration experiments.