Can we add chlorhexidine into glass ionomer cements for band cementation?

Comparative Evaluation of Antimicrobial Effectiveness and Compressive Strength in Neem and Lemongrass-Modified Glass Ionomer Cement: An In Vitro Study

Background Glass ionomer cement (GIC) demonstrates biocompatibility and fluoride ion release, indicating their potential to inhibit a wide range of bacteria, although this remains uncertain. Lemongrass and neem are recognized for their potent antimicrobial activity against numerous pathogenic microorganisms. The objective of the study is to evaluate the antimicrobial effectiveness and compressive strength of GIC modified with neem and lemongrass. Methodology Lemongrass and neem were incorporated into conventional GIC at varying concentrations. Group I - neem-modified GIC (0.5%, 1%, 2%), group II - lemongrass-modified GIC (0.5%, 1%, 2%), and group III (non-modified GIC as a control group). The disk-shaped specimens were then compared to unmodified GIC (control). Antimicrobial effectiveness was assessed using the minimal inhibitory concentration (MIC) assay against Streptococcus mutans and Lactobacillus. Compressive strength was assessed using a Universal Testing Machine, with a crosshead speed set to 0.5 mm per minute. Statistical analysis was conducted with a significance level set at p < 0.05. Results Neem modification displayed superior antimicrobial effectiveness against both Streptococcus mutans and Lactobacillus at all concentrations when compared to the control, with 2% showing the least mean value of 0.262. In contrast, lemongrass modification exhibited a significant difference in effectiveness against Streptococcus mutans but no difference against Lactobacillus. Neem modification demonstrated superior performance compared to lemongrass (p < 0.05). Both modified groups showed no significant impact on compressive strength. Conclusions Neem-modified GIC demonstrated the highest antimicrobial efficacy against Streptococcus mutans and Lactobacillus without altering its compressive strength. This suggests its potential as a promising alternative material in restorative dentistry. Additional in vivo investigations are needed to assess the extended-term effectiveness of the material.

Miswak-Infused Glass Ionomer Cement: A Comparative In Vitro Analysis of Antibacterial Efficacy and Compressive Strength

BACKGROUND

Glass ionomer cement (GIC) restorations are commonly used in primary dentition, due to their aesthetic appeal, self-adhesive nature, and biocompatibility. However, the material's limited antibacterial activity and inadequate mechanical strength highlight the necessity for modifying the material.

AIM

The study aims to evaluate and compare the antimicrobial potency and compressive strength of GIC-incorporated Miswak extract with that of conventional GIC.

MATERIALS AND METHODS

After obtaining the Miswak extract, a modified GIC was formulated by combining the extract with the conventional GIC powder and liquid components, in three different ratios (Powder: Extract and Liquid), Group I (2:1:1), Group II (3:1:2), Group III (3:2:1), and the Group IV as control, which consist of unmodified/conventional GIC. To evaluate and compare the antibacterial efficacy of the modified and unmodified GIC, standard strains of Streptococcus mutans and Lactobacillus were utilized. For each group, the minimal inhibitory concentration (MIC) assay was tested. For the evaluation of compressive strength, cylindrical moulds were utilized in compliance with ISO 9917-1:2007 standards and tested using the universal testing machine (Instron, ElectroPuls®, Bangalore, IND). The highest force exerted at the point of specimen fracture was recorded to calculate the compressive strength values in MPa. The data obtained were analyzed using the Statistical Package for the Social Sciences (IBM SPSS Statistics for Windows, IBM Corp., Version 24.0, Armonk, NY) software. The statistical analysis was conducted utilizing repeated measures of analysis of variance (ANOVA) to calculate the mean MIC values and compressive strength, with pairwise comparisons assessed using Tukey's post hoc test.

RESULTS

The results proved that the antimicrobial properties of Miswak containing GIC performed better against S. mutans and Lactobacillus with a statistically significant difference when compared with group IV (p<0.05), it has been found that an increase in the concentration of extract increased the antimicrobial potency. Significant results were obtained in compressive strength where Group II (41.49±3.6) and Group III (15.23±4.96) proved to be weaker than the control (62.69±2.58), while Group I showed no differences from the control group (p>0.05).

CONCLUSION

It can be concluded that Group I was found to be better in terms of both antimicrobial properties and compressive strength, where no significant difference in compressive strength was identified when comparing Group I with Group IV. Thus, the overall study depicts that a lesser concentration of extract can be the best option in terms of good antimicrobial properties without altering its strength. Hence, the Miswak containing GIC could be a promising restorative material; further studies should include considering intraoral variables such as masticatory stress, moisture levels and in-vivo tests of this combination.

A Comparative In Vitro Analysis of Antimicrobial Effectiveness and Compressive Resilience in Chirata and Terminalia arjuna Modified Glass Ionomer Cement

BACKGROUND

Glass ionomer cements are commonly utilized in dental restorations due to their biocompatibility, strong chemical bond with dental tissues, and ability to resist tooth decay. However, their effectiveness can be compromised by the presence of persistent cavity-causing microorganisms. Therefore, it is essential to consider incorporating antibacterial agents into these restorative materials. Swertia chirayita (S. chirayita) and Terminalia arjuna (T. arjuna) are well-known for their rich composition of phytochemicals that can potentially inhibit the growth of bacteria. Hence, the current research is focused on modifying glass ionomer cement with Chirayita and T. arjuna extracts to enhance its antibacterial properties.

AIM

This research aims to determine the antimicrobial efficacy and compressive strength of glass ionomer cement modified with Chirayita and T. arjuna extracts.

METHODOLOGY

Plant extracts were prepared from both Chirayita and T. arjuna. The powder and liquid components of conventional glass ionomer cement (GIC) were mixed, followed by adding these extracts at three different concentrations. To assess antimicrobial properties, typical strains of Streptococcus mutans and Lactobacillus were employed to test both the modified GIC and unmodified GIC (used as a control). For Chirayita and T. arjuna-modified GIC, minimum inhibitory concentration (MIC) assays were conducted at three different concentrations. MIC was assessed at various time intervals ranging from 1 to 4 hours for modified and unmodified groups. Moreover, compressive strength was measured using cylindrical molds. The highest force exerted at the point of specimen fracture was recorded to calculate the compressive strength values in megapascal (MPa).

RESULTS

The antimicrobial efficiency of Chirata and T. arjuna-modified GIC was evaluated using a MIC assay, indicating a statistically significant enhancement in antimicrobial potency against S. mutans and Lactobacillus within the modified groups in contrast to the control group (p<0.05). However, there were no notable changes in compressive strength when comparing the control group to the modified groups (p>0.05).

CONCLUSION

The antimicrobial effectiveness against S. mutans was observed to be greater in both T. arjuna and Chirayita-modified GIC. In the case of Lactobacillus, Chirayita-modified GIC exhibited more pronounced antimicrobial properties compared to T. arjuna. Importantly, both extracts did not alter the compressive strength of Conventional (unmodified) GIC. Hence, Chirayita-modified GIC appears to be a promising restorative material for combatting recurrent caries. Additional investigation is required to assess the material's stability over an extended period.

Antimicrobial properties of glass-ionomer cement incorporated with zinc oxide nanoparticles against mutans streptococci and lactobacilli under orthodontic bands: An in vivo split-mouth study

Background

The aim of this study was to assess the effect of incorporation of zinc oxide nanoparticles (ZnO-NPs) to glass-ionomer cement (GIC) (Fuji II SC, GC Corp., Tokyo, Japan) on subgingival accumulation of mutans streptococci and lactobacilli under orthodontic bands.

Materials and Methods

In order to conduct this in vivo split-mouth study, 20 patients aged between 7 and 10 years who required lingual holding arch on their mandibular first molars were divided into two groups. In one group, Fuji II SC GIC was used for cementation of the right molar band, and the same cement containing 2 wt% ZnO-NPs was used for the left one. The opposite was performed for the second group while the operator was blinded to the cement types. Subgingival microbial sampling was performed 16 weeks after cementation of lingual arch. Mutans streptococci and lactobacilli colony counts were compared. Paired t-test was used to compare the two cement groups. Data were analyzed using SPSS version 21, and P ≤ 0.05 was considered statistically significant.

Results

The mean colony counts of mutans streptococci, lactobacilli, and total bacterial count in Fuji II SC containing ZnO-NPs were significantly lower than the corresponding values in plain Fuji II SC group.

Conclusion

Incorporation of ZnO-NPs into GIC reveals antimicrobial features against mutans streptococci and lactobacilli under orthodontic bands.

Influence of chlorhexidine digluconate on biocompatibility of cements: Morphological and immunohistochemistry analysis

In this study, the in vivo biocompatibility was evaluated by using conventional ionomer cements modified with Chlorhexidine (CHX) in different time intervals. In total, 105 male Wistar rats were randomized into seven groups: control, groups M, M10, M18 and groups RL, RL10, RL18 (M-Meron and RL-RivaLuting, and added CHX-10% and CHX-18%, respectively). Histological analyses of inflammatory infiltrate and collagen fibers, and immunohistochemistry of CD68+ for macrophages (MOs) and multinucleated giant cells (MGCs) were performed. Data were analyzed using the Kruskal-Wallis and Dunn (p < .05) tests. Intense inflammatory infiltrate was demonstrated in Group Riva CHX-18% within 7 and 15 days (p < .05), without differences after 30 days. For collagenization, healing of the groups was compatible with that of control in 15 and 30 days (p > .05). Immunomarking of CD68+ was more significant in the groups with higher concentration of CHX. There was significant difference in quantity of MGCs in groups with 18% CHX, Meron (p = .001) in 7 days, and in Riva at 30 days (p = .001). Significant difference was also found in quantities of MOs in Groups Meron and Riva in 7 days (p = .001), and only in Riva at 15 and 30 days (p = .001). The cements with addition of CHX demonstrated biocompatibility with tissues. Riva CHX-18% had the most effect on cells of the inflammatory process but showed satisfactory tissue repair.

Nitrogen doped titanium dioxide as an aesthetic antimicrobial filler in dental polymers

OBJECTIVE

To develop an aesthetic resin composite using a nitrogen-doped titanium dioxide (NTiO₂) filler that possesses antimicrobial properties against cariogenic bacteria.

METHODS

N-TiO₂ powder was manufactured by calcining commercial TiO₂ with urea. Free radical release from the N-TiO₂ powder under visible light irradiation was analysed using UV-Vis spectrophotometry. The N-TiO₂ powder was incorporated into a dental resin and the photocatalytic activity assessed using a dye under both visible light and dark conditions. Using XTT assay to measure the cellular metabolic activity, the antibacterial properties of the N-TiO₂ /resin composite discs were tested using Streptococcus mutans.

RESULTS

Doping nitrogen of TiO₂ resulted in a band gap shift towards the visible light spectrum, which enabled the powder to release reactive oxygen species when exposed to visible light. When incorporated into a dental resin, the N-TiO₂/resin composite still demonstrated sustained release of reactive oxygen species, maintaining its photocatalytic activity and showing an antibacterial effect towards Streptococcus mutans under visible light conditions.

SIGNIFICANCE

N-TiO₂ filled resin composite shows great promise as a potential aesthetic resin based adhesive for orthodontic bonding.

Should local drug delivery systems be used in dentistry?

In dentistry, the use of biomaterial-based drug delivery systems (DDS) aiming the release of the active compounds directly to the site of action is slowly getting more awareness among the scientific and medical community. Emerging technologies including nanotechnological platforms are offering novel approaches, but the majority are still in the proof-of-concept stage. This study critically reviews the potential use of DDS in anesthesiology, oral diseases, cariology, restorative dentistry, periodontics, endodontics, implantology, fixed and removable prosthodontics, and orthodontics with a special focus on infections. It also stresses the gaps and challenges faced. Despite numerous clinical and pharmacological advantages, some disadvantages of DDS pose an obstacle to their widespread use. The biomaterial's biofunctionality may be affected when the drug is incorporated and may cause an additional risk of toxicity. Also, the release of sub-therapeutic levels of drugs such as antibiotics may lead to microbial resistance. Multiple available techniques for the manufacture of DDS may affect drug release profiles and their bioavailability. If the benefits outweigh the costs, DDS may be potentially used to prevent or treat oral pathologies as an alternative to conventional strategies. A case-by-case approach must be followed.

Analysis of Chlorhexidine Modified Cement in Orthodontic Patients: A Double-Blinded, Randomized, Controlled Trial

OBJECTIVES

The aim of this study was to evaluate the microbiological and mechanical properties of glass ionomer cement (GIC) modified by chlorhexidine (CLX) for the purpose of cementing bands to the teeth of orthodontic patients.

MATERIALS AND METHODS

Ten patients, between the ages of 19 and 33 years, in the initial stage of orthodontic treatment, were randomly designated to two groups using the split-mouth design (n = 10). One group (GICEX) had bands cemented with GIC modified by CLX and a Control group (GIC), evaluated at time intervals before (T0), 3 months (T3), and 6 months (T6) after cementation. Total microbiological counts were performed, and color stability of tooth enamel, salivary pH, and the adhesive remnant index (ARI) were evaluated.

STATISTICAL ANALYSIS

The Friedman and Dunn's tests, Mann-Whitney, one-way analysis of variance, and Tukey, and paired and non-paired t-tests (p< 0.05) were used.

RESULTS

In T3, there was evidence of significant reduction in the quantity of colony forming unit (CFU) in GICEX group in comparison with the Control (p = 0.041). In T6, the quantity of CFU was similar to the quantity in T3 and significantly different to control (p = 0.045); Control group demonstrated a similar quantity of CFU between the experimental time intervals (p = 0.066). Salivary pH demonstrated significant difference only between the time intervals T0 and T6 (p = 0.022). The tooth enamel color (p = 0.366) and ARI (p = 0.343) values demonstrated no significant changes.

CONCLUSION

The incorporation of CLX into GIC demonstrated effective antibacterial action, allowed a good bond of the cement to the enamel, a high rate of survival of the bands, did not change the color of the tooth enamel, and maintained the salivary pH at physiological levels.

Effect of Yellow Propolis on Biocompatibility of Cements: Morphological and Immunohistochemistry Analysis

Objective  The focus of this study was to evaluate the biocompatibility of ionomer cements modified with ethanolic extracts of propolis (EEP) in different concentrations and time intervals.

Materials and Methods  In total, one hundred and thirty-five male Wistar rats were randomized into nine groups: Control, Groups Meron, and Groups Ketac (conventional, and added with 10, 25, 50% EEP, respectively). Histological analyses of inflammatory infiltrate and collagen fibers, and immunohistochemistry of CD68+ for macrophages (MOs) and multinucleated giant cells (MGCs) were performed.

Statistical Analysis  Data were analyzed using the Kruskal—Wallis and Dunn ( p < 0.05) tests.

Results  Intense inflammatory infiltrate was demonstrated in the cements with 10% EEP at 7 days and 15 days ( p < 0.05), only Group Ketac 10% EEP ( p = 0.01) at 30 days. A smaller quantity of collagen fibers was observed in the cements with 10% EEP ( p = 0.01) at 7 days, and Group Meron 10% EEP ( p = 0.04) at 15 days. MOs and MGCs showed significant difference for the cements with 10% EEP ( p = 0.01) at 7 and 15 days. At 30 days, MOs persisted in the Groups with 10% EEP.

Conclusions  The concentration of 10% EEP had the greatest influence on the inflammatory and tissue repair processes. The concentrations of 25 and 50% EEP demonstrated biocompatibility similar to that of cements that did not receive EEP.

Antimicrobial properties, mechanics, and fluoride release of ionomeric cements modified by red propolis

OBJECTIVES

To evaluate the antimicrobial activity, mechanical properties, and fluoride release capacity of glass ionomer cement (GIC) used for cementing orthodontic bands and modified by ethanolic extract of red propolis (EERP) in different concentrations.

MATERIALS AND METHODS

Two orthodontic GICs containing EERP at 10%, 25%, and 50%, were used. The following assays were carried out: cell viability tests against Streptococcus mutans and Candida albicans, diametral tensile strength, compressive strength, shear bond strength, microhardness, and fluoride release capacity. The statistical analyses of the antimicrobial tests, fluoride release, diametral tensile strength, compressive strength, and microhardness were performed using two-way analysis of variance and Tukey test (P < .05). Shear bond strength data were analyzed using one-way analysis of variance followed by Tukey test (P < .05).

RESULTS

At the concentrations of 25% and 50%, EERP was shown to be a promising antimicrobial agent incorporated into GICs against C albicans (P < .001) and S mutans (P < .001). The fluoride release capacity of the GICs was not affected, and the EERP concentration of 25% was the one that least affected the mechanical properties of the cements (P > .05).

CONCLUSIONS

The GICs containing EERP at 25% showed a significant increase in their antimicrobial activity against S mutans and C albicans, while mechanical properties and fluoride release remained without significant changes.

Evaluation of the antimicrobial activity and compressive strength of a dental cement modified using plant extract mixture

Literature lacks sufficient data regarding addition of natural antibacterial agents to glass ionomer cement (GICs). Hence, the aim of the study was to increase the antimicrobial properties of GICs through its modification with mixture of plant extracts to be evaluated along with an 0.5% chlorohexidine-modified GIC (CHX-GIC) with regard to biological and compressive strength properties. Conventional GIC (freeze-dried version) and CHX were used. Alcoholic extract of Salvadora persica, Olea europaea, and Ficus carcia leaves were prepared using a Soxhlet extractor for 12 h. The plant extract mixture (PE) was added in three different proportions to the water used for preparation of the dental cement (Group 1:1 PE, 2:1 PE, and 1:2 PE). Specimens were then prepared and tested against the unmodified GIC (control) and the 0.5% CHX-GIC. Chemical analysis of the extract mixture was performed using Gas chromatography-mass spectrometry. Antimicrobial activity was evaluated using agar diffusion assay against Micrococcus luteus and Streptoccocus mutans. Compressive strength was evaluated according to ISO 9917-1:2007 using a Zwick testing machine at a crosshead speed of 0.5 mm/min. Antimicrobial activity against Streptoccocus mutans was significantly increased for all the extract-modified materials compared to the unmodified cement, and the highest concentration was comparable to the CHX-GIC mixture. The activity against Micrococcus luteus was also significantly increased, but only for the material with the highest extract concentration, and here the CHX-GIC group showed statistically the highest antimicrobial activity. Compressive strength results revealed that there was no statistically significant difference between the different mixtures and the control except for the highest tested concentration that showed the highest mean values. The plant extracts (PEs) enhanced the antimicrobial activity against S. mutans and also against M. luteus in the higher concentration while compressive strength was improved by addition of the PE at higher concentrations.

In Vivo Biocompatibility, Mechanical, and Antibacterial Properties of Cements Modified with Propolis in Different Concentrations

Objectives  The focus of this triple-blind randomized study was to evaluate the mechanical properties, antibacterial effect, and in vivo biocompatibility of glass ionomer cements (GICs) modified with ethanolic extracts of propolis (EEP).

Materials and Methods  For biocompatibility tests, 135 male Wistar rats were used and divided into nine groups: Group C (control, polyethylene), Groups M, M10, M25, M50 (Meron; conventional, and modified with 10%, 25%, 50% EEP, respectively), Groups KC, KC10, KC25, KC50 (Ketac Cem; conventional, and modified with 10%, 25%, 50% EEP, respectively). The tissues were analyzed under an optical microscope for different cellular events in different time intervals. Shear bond strength test (SBST) on cementation of metal matrices ( n = 10, per group), adhesive remnant index (ARI) in bovine incisors ( n = 10, per group), and antibacterial properties by the agar diffusion test ( n = 15, per group) were analyzed.

Statistical Analysis  Data were analyzed by Kruskal–Wallis test followed by Dunn, and one-way analysis of variance test followed by Tukey’s test ( p < 0.5).

Results  Morphological evaluation demonstrated intense inflammatory infiltrate in Groups M10 and KC10 in the time intervals of 7 ( p = 0.001) and 15 ( p = 0.006) days. Multinucleated giant cells were shown to be more present in Group M1, with statistical difference from Control and KC50 Groups in the time interval of 7 days ( p = 0.033). The SBST showed no statistical significance among the groups ( p > 0.05). Antibacterial property showed a statistically significant difference between Meron and Meron 50%-EEP Groups, and between Ketac and Ketac 50%-EPP Groups ( p = 0.001).

Conclusions  The intensity of histological changes resulting from the cements was shown to be inversely proportional to the concentration of propolis added; Ketac 50%-EPP was the concentration that had the most favorable biocompatibility results. Addition of EEP to GIC did not negatively change the SBST and ARI. Antibacterial property demonstrated a concentration-dependent effect.

Antimicrobial, mechanical and biocompatibility analysis of chlorhexidine digluconate-modified cements

Background

The focus of this study was to evaluate the antimicrobial, mechanical properties and biocompatibility of glass ionomer (GICs) modified by Chlorhexidine (CHX).

Material and Methods

For biocompatibility, 105 male Wistar rats were used, divided into 7 groups (n=15): Group C (Control,Polyethylene), Groups M, M10, M18, and Groups RL, RL10, RL18 (M-Meron and RL-Riva Luting: conventional, and modified with 10%, and 18% CHX, respectively). The tissues were analyzed under optical microscope for different cellular events and time intervals. Antibacterial effect and Shear Bond Strength Test (SBST) were also analyzed. Biocompatibility was analyzed by the Kruskal-Wallis and Dunn tests; SBST one-way ANOVA and Tukey test (P<0.05). For the antibacterial effect, the Kruskal-Wallis and Friedman, followed by Dunn (P<0.05) tests were used.

Results

Morphological study of the tissues showed inflammatory infiltrate with significant differences between Groups C and RL18, in the time intervals of 7(P=0.013) and 15(P=0.032) days. The antimicrobial effects of the cements was shown to be CHX concentration-dependent (P=0.001). The SBST showed no significant difference between the Groups of Meron cement (P=0.385), however, there was difference between Group RL and Groups RL10 and RL18 (P=0.001).

Conclusions

The addition of CHX did not negatively influence the SBST. Meron-CHX-10% was the most biocompatible, and Riva-CHX-18% had more influence on the inflammatory process and presented slower tissue repair.

Key words:Glass ionomer, chlorhexidine, biocompatibility, antimicrobial properties, microscope.

Comparison of the Effects of Cytotoxicity and Antimicrobial Activities of Self-adhesive, Eugenol and Noneugenol Temporary and Traditional Cements on Gingiva and Pulp Living Cells

Aims and objectives:

The aim of this in vitro study was to investigate the antibacterial and cytotoxic effect of cements: zinc polycarboxylate, glass ionomer, self-adhesive resin cement, eugenol-containing and eugenol-free temporary cements.

Materials and methods:

The agar-diffusion test was carried out on 4 types of bacteria: Streptococcus mutans ( S. mutans; ATCC 35668), Streptococcus salivarius ( S. salivarius; ATCC 13419), Streptococcus sangius ( S. sangius; ATCC 10556), and Lactobacillus casei ( L. casei; ATCC 27139). Freshly prepared cement samples were placed on a brain heart infusion medium and left at 37°C for 24 hours in a CO2 incubator. Ampicillin disks of 10 mg were used as positive controls. Antimicrobial effects were determined using the zone of inhibition measurement in millimeters at 24 and 48 hours. Cytotoxicity was assessed through a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay (SERVA Electrophoresis GmbH, Heidelberg, Germany). To evaluate cell viability, an optical density microplate reader (Tecan™ Sunrise, Männedorf, Switzerland) was used at 24 and 48 hours at 570 and 630 nm, respectively.

Results:

Except the positive control group, the Adhesor luting cement showed a higher inhibitory effect on S. sangius and L. casei. RelyX Temp E temporary cement showed an inhibitory effect on S. sangius and L. casei, whereas the Cavex temporary cement showed an inhibitory effect on only S. sangius at 24 and 48 hours. At 100% concentration, Cavex temporary cement showed the least toxicity (23.6% pulp cell and 9.9% gingival cell) and highest cell viability (76.4% pulp cell and 90.1% gingival cell) at 24 hours. However, Meron, Adhesor, Panavia SA luting, and RelyX Temp E temporary cements showed the highest toxicity (above 94% gingival cell and 95% pulp cell) at 100% concentration.

Conclusions:

Meron, Adhesor, Panavia SA luting, and RelyX Temp E temporary cements may have a cytotoxic potential. None of the cements showed an inhibitory effect on S. mutan and S. salivarius, whereas Adhesor luting cement has a higher inhibitory effect than that of S. sangius and L. casei.

Effect of surface treatments on the mechanical properties and antimicrobial activity of desiccated glass ionomers

OBJECTIVES

The purpose of this study was to evaluate the effect of various surface treatments on the mechanical properties and antibacterial activity of desiccated glass-ionomer (GI) and resin-modified glass-ionomer (RMGI) materials.

METHODS

One hundred GI and RMGI specimens were fabricated in a mold, stored in 100% humidity for 24h, placed in air to desiccate for 24h, and then stored for one week in one of the five media [casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), chlorhexidine (CHX), sodium fluoride (NaF), cetylpyridinium chloride (CPC), or 100% humidity (control)]. Fifty GI and RMGI specimens were tested in flexure to determine flexural strength and modulus, with the fragments used for Knoop hardness testing. The remaining 50 GI and RMGI specimens were covered with a suspension of Streptococcus mutans and incubated for 24h. The bacterial suspension was removed and the specimens were washed. Sterile saline was added, vortex mixed, serially diluted, and plated. CFU/mLs were calculated after 3days of incubation.

RESULTS

Compared to the 100% humidity control group, surface treatment of the desiccated GI and RMGI materials had a variable effect on the mechanical properties. In general, NaF provided the greatest improvement in flexural strength and modulus. Surface treatment of the desiccated GI or RMGI specimens with CHX or CPC resulted in no growth of the S. mutans. NaF resulted in significantly lower CFU/mL than CPP-ACP, which was significantly lower than the control group.

SIGNIFICANCE

Surface treatment with 5% NaF provides improved antimicrobial and strength properties of desiccated GI or RMGI materials.

Physical properties of different orthodontic cements

INTRODUCTION

We evaluated the water absorption, solubility, and compressive strength of different cements and resin-modified glass ionomer cements (RMGICs), namely Adhesor®, Ketac(™) Cem, Ortho Band Paste LC(™), Glass Ionomer Band Cement, and Transbond(™) Plus. Our aims were to compare the mechanical and physical properties of the cements widely used in orthodontics and to define the most suitable cements in an oral environment in terms of those characteristics.

MATERIALS AND METHODS

To assess compressive strength, the cements were subjected to compression tests done on a universal testing machine. To test water absorption and solubility, the weight changes in cement specimens were determined after immersion in distilled water for 1, 7, and 30 days.

RESULTS

Adhesor® and Ketac(™) Cem presented significantly higher solubility values than other cements after water immersion for 1, 7, and 30 days (p < 0.001).

CONCLUSION

Our results revealed that the traditional orthodontic cements have higher water solubility and water absorption values as well as lower compressive strength values than the RMGICs used in this study. Furthermore, Transbond(™) Plus revealed the highest compressive strength, whereas Adhesor® showed the lowest.

A novel antimicrobial orthodontic band cement with in situ-generated silver nanoparticles

OBJECTIVE

To develop an antimicrobial orthodontic band cement for the prevention of white spot lesions using a novel process that generates silver nanoparticles (AgNP) in situ.

MATERIALS AND METHODS

Twenty-seven groups of AgNP-loaded Opal Band Cement (OBC) and two control groups were formulated with varying concentrations of additional benzoyl peroxide (0.5, 1.0, 1.5, or 2.0 wt%) and 2,2-(p-Tolylimino) diethanol (0.5 or 1 wt%). Rockwell15T hardness and near-infrared FTIR were used to assess degree of cure, three-point bending was used to determine modulus and ultimate transverse strength (UTS), and Ag(+) ion release was measured for up to 4 months in vitro using atomic absorption spectroscopy. Antimicrobial activity against Streptococcus mutans and Lactobacillus acidophilus was tested in vitro by counting colony-forming units for up to 28 days. Biocompatibility was evaluated following ISO specifications 7405 (2008), 10993-3 (2003), 10993-5 (2009), and 10993-10 (2010).

RESULTS

Most of the experimental groups had hardness, modulus, and UTS values similar to those of the control group. Ag(+) ion release was observed for all AgNP-loaded groups for up to 4 months. Increase in Ag loading increased Ag(+) ion release and in vitro antimicrobial effect. The biocompatibility of the optimal AgNP-loaded OBC was comparable to that of negative controls.

CONCLUSION

A novel antimicrobial orthodontic band cement was developed that has comparable mechanical properties to controls, controlled and sustained Ag(+) ion release, significant bacterial inhibition in vitro, and excellent biocompatibility.

Effect of chlorhexidine gluconate on porosity and compressive strength of a glass ionomer cement

INTRODUCTION:For presenting wide antibacterial activity, chlorhexidine (CHX) has been extensively used in dentistry and can be easily incorporated into the glass ionomer cement (GIC) and consequently released into the oral cavity.AIM: The aim of this study was porosity and compression strength of a GIC, that was added to different concentrations of CHX.MATERIAL AND METHOD: Specimens were prepared with GIC (Ketac Molar Esaymix) and divided into 4 groups according to the concentration of CHX: control, 0.5% and 1% and 2% (n = 10). For analysis of pores specimens were fractured with the aid of hammer and chisel surgical, so that the fracture was performed in the center of the specimens, dividing it in half and images were obtained from a scanning electron microscope (SEM) analyzed in Image J software. The compressive strength test was conducted in a mechanical testing machine (EMIC - Equipment and Testing Systems Ltd., Joseph of the Pines, PR, Brazil). Statistical analysis was performed by ANOVA, Tukey test. Significance level of 5%.RESULT: No statistically significant changes between the study groups was observed both for the number of pores as well as for the compressive strength.CONCLUSION: The use of GIC associated with CHX gluconate 1% and 2% is the best option to be used in dental practice.

Antibacterial and mechanical properties of propolis added to glass ionomer cement

OBJECTIVE

To investigate whether adding ethanolic extracts of propolis (EEP) might influence the antibacterial and mechanical (shear-peel band strength [SPBS]) properties of conventional glass ionomer cement (GIC) used in orthodontic band cementation.

MATERIALS AND METHODS

The cement was divided into four groups: one using the original composition and three with 10%, 25%, and 50% EEP added to the liquid and then manipulated. An antimicrobial assay, broth-dilution method was used to determine the antibacterial capacity of the GIC containing EEP. Eighty teeth were used for the mechanical assay, and an Instron testing machine was used to evaluate the SPBS. Kolmogorov-Smirnov and Kruskal-Wallis tests were used for statistical analyses.

RESULTS

GIC with the addition of 25% and 50% EEP activated inhibition of Streptococcus mutans (ATCC 25175) growth, but this effect did not occur in the group to which 10% EEP was added or in the control GIC group. There was no significant difference between the groups in terms of SPBS (P > .05).

CONCLUSIONS

The addition of EEP may increase antibacterial properties without negatively modifying the mechanical properties of conventional GIC.

Orthodontic-periodontics interdisciplinary approach

In this present era, when a significant number of patients seeking orthodontic treatment are adults, importance of multidisciplinary treatment approach cannot be overemphasized. Higher susceptibility of plaque accumulation in patients undergoing orthodontic treatment makes involvement of periodontist almost unavoidable. Also, orthodontic treatment frequently results in undesirable periodontal changes which require immediate attention. More recently, orthodontics has been used as an adjunct to periodontics to increase connective tissue support and alveolar bone height. The purpose of this article is to review the adverse effects of orthodontic treatment on the periodontal tissues and to discuss the mutually beneficial relationship shared between the two specialties.