Remineralization of post-orthodontic white spot lesions with a fluoride varnish and a self-assembling P 11 - 4 peptides: a prospective in-vivo-study

OBJECTIVE

The objective was to evaluate the remineralization effects of fluoride varnish (Clinpro White varnish), self-assembling peptide (Curodont™ Repair) and their combined use on WSL after orthodontic treatment.

MATERIALS AND METHODS

Thirty-two subjects, aged of 10-18 (mean age 13.91 ± 2.92) with 107 post-orthodontic WSL were included in the study. Subjects were divided into four groups as control, tricalcium phosphate (TCP) containing fluoride varnish (Clinpro White varnish) group, self-assembling P11-4 peptides (Curodont™ Repair) group and combined application of the two products. At the beginning, each subjects' caries risk profile was assessed by evaluating diet cariogenicity, plaque index, gingival bleeding index and stimulated salivary flow rate. Before the application of the remineralization agents, WSL baseline demineralization values were determined with QLF Inspektor™ Pro, laser fluorescence using DIAGNOdent and color values were measured by Vita EasyShade. Remineralization data were obtained by measuring ΔF, ΔQ, and lesion area with QLF. The aesthetic improvement after the remineralization process was evaluated with a spectrophotometer at six weeks, three and six months.

RESULTS

No statistically significant differences were found between the groups in terms of criteria determining patients' caries risk profiles, DIAGNOdent data, and plaque index scores (p > 0.05). Intra-group evaluation following remineralization revealed statistically significant increases in ΔF and ΔQ with a decrease in lesion area for the fluoride varnish group at six months, for the peptide group at three months, and for the combined application group at three and six months (p < 0.05). In inter-group comparisons, ΔF and ΔQ values were found to be statistically significant only in the fluoride group at six months compared to the other groups (p < 0.05). While the L* value decreased significantly in all groups at six months, a statistically significant difference in ΔE* values was observed only in the control group between three and six months.

CONCLUSION

Fluoride varnish with TCP showed highest remineralization at 6 months, and the remineralization was positively affected in the short term (three months) after the use of self-assembling P11-4 peptides and their combined application.

CLINICAL RELEVANCE

Remineralization obtained after single application of agents tested in six months in-vivo showed parallel results. In an attempt to trigger subsurface remineralization, the combined use of fluoride with self-assembling peptides as biomimetic remineralization agent needs further evaluation.

3D Dental Subsurface Imaging Using Enhanced Truncated Correlation-Photothermal Coherence Tomography

Development of accurate and sensitive dental imaging technologies is a top priority in the pursuit of high-quality dental care. However, while early dental caries detection and routine monitoring of treatment progress are crucial for effective long-term results, current radiographic technologies fall short of this objective due to low sensitivity for small lesions and use of ionizing radiation which is unsuitable for frequent monitoring. Here we demonstrate the first application of enhanced Truncated Correlation-Photothermal Coherence Tomography (eTC-PCT) to dental imaging. eTC-PCT is non-invasive and non-ionizing, operates well below the maximum permissible exposure (MPE) limit, and features 3D subsurface imaging capability with operator controlled axial resolution. We explore the potential of this method for dental applications and demonstrate its capability for depth-resolved tomographic 3D reconstructions of the details and subsurface extent of a variety of dental defects. To this end, in this proof-of-concept study, dental eTC-PCT imaging results, and its sensitivity to dental caries, are discussed in comparison with visual examination, x-rays and micro-CT imaging.

Micro-computerized tomography assessment of fluorescence aided caries excavation (FACE) technology: comparison with three other caries removal techniques

BACKGROUND

The aim of this study was to determine the caries removal effectiveness (CRE) and minimal invasiveness potential (MIP) of four dentine caries removal methods.

METHODS

After carious molars were scanned using micro-computerized tomography (micro-CT), dentine caries were removed by fluorescence aided caries excavation (FACE) technology, laser induced fluorescence (LIF), chemomechanical excavation (CME), and conventional excavation (CE). Micro-CT was then repeated. CRE was determined based on the volume of residual caries/initial caries (RC/IC) and the mean mineral density (MD) at the cavity floor. MIP was determined by measuring the volume of the prepared cavity/initial cavity (PC/IC).

RESULTS

Among the four groups, the LIF group had the smallest RC/IC (0.08), the highest mean MD at the cavity floor (1.32 g/cm(3) ) and the highest MIP (4.47). The CME group had the highest RC/IC (0.24), the lowest mean MD (1.01 g/cm(3) ) and the lowest MIP (2.23). The CE group exhibited a more acceptable CRE (RC/IC = 0.13, mean MD = 1.21 g/cm(3) ) but had a higher MIP (3.95). Both the CRE and MIP parameters of FACE technology were the second most acceptable (RC/IC = 0.12, mean MD = 1.13 g/cm(3) , MIP = 3.20) and did not differ significantly from the most acceptable.

CONCLUSIONS

FACE is an effective caries removal technology for removing infected dentine without significantly increasing cavity size.

In vitro evaluation of Midwest Caries ID: a novel light-emitting diode for caries detection

INTRODUCTION

Traditional detection techniques have limits in diagnosing occlusal caries. Thus, more accurate methods are needed. This study evaluates the ability of the Midwest Caries ID (Midwest) to detect caries.

METHODS

Two hundred sixty-four extracted, nonrestored premolars and molars were cleaned and stored in 0.2% sodium azide. Teeth were divided into three groups of 88. One examination site on each occlusal surface was chosen. Each site was inspected by a calibrated examiner via visual, Midwest, and histologic exams. First, a visual exam was performed following the International Caries Detection and Assessment guidelines. Next, the same site was inspected using the Midwest device. Finally, the tooth was sectioned mesiodistally through the site. The half with greater caries progression was visualized under a stereomicroscope (64×). Histologic appearance was scored based on the Downer system. Data were analyzed using Kendall tau-b, partial correlation coefficients, and the receiver operating characteristics curve.

RESULTS

Overall, the Midwest scoring assessment correlated with histologic assessments (tau = 0.32; p<0.0001), but the visual exam had a stronger correlation (tau = 0.53; p<0.0001) with the histologic exam. The sensitivity and specificity of the Midwest was also reported at 0.56 and 0.84, compared with 0.92 and 0.43, respectively, for the visual exam.

CONCLUSIONS

Midwest Caries ID is a novel caries detection device that has limitations and should not be used as the sole means to detect occlusal caries.

An in vivo and in vitro investigation of the use of ICDAS, DIAGNOdent pen and CarieScan PRO for the detection and assessment of occlusal caries in primary molar teeth

OBJECTIVES

The aim of this study was to investigate the in vivo and in vitro validity of International Caries Detection and Assessment System (ICDAS), DIAGNOdent pen and CarieScan PRO in the detection and assessment of occlusal caries in primary teeth.

METHODS

Sixty-four molars were assessed using all three systems under standardised in vivo conditions. They were then extracted and assessed by two examiners in vitro along with an additional 38 teeth (102 teeth in total from 45 children). Downer's histological scoring criterion was the validation gold standard. Sensitivity, specificity, positive and negative likelihood ratios and area under the receiver-operator curves were calculated for all caries and dentine caries. Repeatability was analysed using Cohen's Kappa and the performance of the systems between in vivo and in vitro settings by the same examiner were compared.

RESULTS

ICDAS showed the highest validity and repeatability. The DIAGNOdent pen's overall clinical validity was comparable to that of ICDAS, but it demonstrated only moderate repeatability. CarieScan PRO had negligible validity in vivo, and there was no relationship between in vivo and in vitro parameters.

CONCLUSIONS

The in vivo results of ICDAS and DIAGNOdent pen were satisfactory and comparable to those obtained in vitro, with ICDAS performing better. The CarieScan PRO performed poorly under both conditions.

CLINICAL RELEVANCE

ICDAS should be the index of choice when detecting and assessing occlusal caries in the primary dentition, and in vitro data can be safely extrapolated in vivo. The DIAGNOdent pen must be employed with caution. Currently, the CarieScan PRO is unsuitable for use in the primary dentition.

The performance of conventional and fluorescence-based methods for occlusal caries detection: an in vivo study with histologic validation

BACKGROUND

The authors conducted an in vivo study to determine clinical cutoffs for a laser fluorescence (LF) device, an LF pen and a fluorescence camera (FC), as well as to evaluate the clinical performance of these methods and conventional methods in detecting occlusal caries in permanent teeth by using the histologic gold standard for total validation of the sample.

METHODS

One trained examiner assessed 105 occlusal surfaces by using the LF device, LF pen, FC, International Caries Detection and Assessment System (ICDAS) criteria and bitewing (BW) radiographic methods. After tooth extraction, the authors assessed the teeth histologically. They determined the optimal clinical cutoffs by means of receiver operating characteristic curve analysis.

RESULTS

The specificities and sensitivities for enamel and dentin caries detection versus only dentin caries detection thresholds were 0.60 and 0.93 and 0.77 and 0.52 (ICDAS), 1.00 and 0.29 and 0.97 and 0.44 (BW radiography), 1.00 and 0.85 and 0.77 and 0.81 (LF device), 0.80 and 0.89 and 0.71 and 0.85 (LF pen) and 0.80 and 0.74 and 0.49 and 0.85 (FC), respectively. The accuracy values were higher for ICDAS, the LF device and the LF pen than they were for BW radiography and the FC.

CONCLUSIONS

The clinical cutoffs for sound teeth, enamel carious lesions and dentin carious lesions were, respectively, 0 through 4, 5 through 27 and 28 through 99 (LF device); 0 through 4, 5 through 32 and 33 through 99 (LF pen); and 0 through 1.2, 1.3 and 1.4 through 5.0 (FC). The ICDAS, the LF device and the LF pen demonstrated good performance in helping detect occlusal caries in vivo. The ICDAS did not seem to perform as well at the D(3) threshold (histologic scores 3 and 4) as at the D(1) threshold (histologic scores 1-4). BW radiography and the FC had the lowest performances in helping detect lesions at the D(1) and D(3) thresholds, respectively.

CLINICAL IMPLICATIONS

Occlusal caries detection should be based primarily on visual inspection. Fluorescence-based methods may be used to provide a second opinion in clinical practice.

Dental caries and pulpal disease

This article reviews the diagnostic process, from the first clinically evident stages of the caries process to development of pulpal pathosis. The caries diagnostic process includes 4 interconnected components-staging caries lesion severity, assessing caries lesion activity, and risk assessments at the patient and tooth surface level - which modify treatment decisions for the patient. Pulpal pathosis is diagnosed as reversible pulpitis, irreversible pulpitis (asymptomatic), irreversible pulpitis (symptomatic), and pulp necrosis. Periapical disease is diagnosed as symptomatic apical periodontitis, asymptomatic apical periodontitis, acute apical abscess, and chronic apical abscess. Ultimately, the goal of any diagnosis should be to achieve better treatment decisions and health outcomes for the patient.

Demineralization Depth Using QLF and a Novel Image Processing Software

Quantitative Light-Induced fluorescence (QLF) has been widely used to detect tooth demineralization indicated by fluorescence loss with respect to surrounding sound enamel. The correlation between fluorescence loss and demineralization depth is not fully understood. The purpose of this project was to study this correlation to estimate demineralization depth. Extracted teeth were collected. Artificial caries-like lesions were created and imaged with QLF. Novel image processing software was developed to measure the largest percent of fluorescence loss in the region of interest. All teeth were then sectioned and imaged by polarized light microscopy. The largest depth of demineralization was measured by NIH ImageJ software. The statistical linear regression method was applied to analyze these data. The linear regression model was Y = 0.32X + 0.17, where X was the percent loss of fluorescence and Y was the depth of demineralization. The correlation coefficient was 0.9696. The two-tailed t-test for coefficient was 7.93, indicating the P-value = .0014. The F test for the entire model was 62.86, which shows the P-value = .0013. The results indicated statistically significant linear correlation between the percent loss of fluorescence and depth of the enamel demineralization.

Caries Detection Methods Based on Changes in Optical Properties between Healthy and Carious Tissue

A conservative, noninvasive or minimally invasive approach to clinical management of dental caries requires diagnostic techniques capable of detecting and quantifying lesions at an early stage, when progression can be arrested or reversed. Objective evidence of initiation of the disease can be detected in the form of distinct changes in the optical properties of the affected tooth structure. Caries detection methods based on changes in a specific optical property are collectively referred to as optically based methods. This paper presents a simple overview of the feasibility of three such technologies for quantitative or semiquantitative assessment of caries lesions. Two of the techniques are well-established: quantitative light-induced fluorescence, which is used primarily in caries research, and laser-induced fluorescence, a commercially available method used in clinical dental practice. The third technique, based on near-infrared transillumination of dental enamel is in the developmental stages.

The possibility of digital imaging in the diagnosis of occlusal caries

The aim of this study was to assess the possibility of digital image analysis of pit-and-fissure discoloration in order to diagnose caries. Digital images showing pit-and-fissure discoloration in 100 teeth of 19 patients were analyzed to obtain the fractal dimension (FD) and the proportion of the area of pit-and-fissure discoloration to the area of occlusal surface (PA). DIAGNOdent values were measured (DD), and dentists' diagnoses were also obtained. The sensitivity and specificity of FD, PA, DD, and the combination of FD and PA compared to the dentists' diagnoses were calculated. The sensitivities of FD, PA, DD, and the combination of FD and PA were 0.89, 0.47, 0.69, and 0.86, respectively, and the specificities were 0.84, 0.95, 0.91, and 0.86, respectively. Although further research is needed for the practical use, it is possible to use the analysis of digital images of pit-and-fissure molar discoloration as a diagnostic tool.