Physicochemical characterization of nimodipine–polyethylene glycol solid dispersion systems

Spectroscopic characterization and pharmacokinetic evaluation of amorphous solid dispersions of glibenclamide for bioavailability enhancement in Wistar rats

Oral bioavailability of glibenclamide (Glb) was appreciably improved by the formation of an amorphous solid dispersion with Poloxamer-188 (P-188). Poloxamer-188 substantially enhanced the solubility and thereby the dissolution rate of the biopharmaceutics classification system (BCS) class II drug Glb and simultaneously exhibited a better stabilizing effect of the amorphous solid dispersion prepared by the solvent evaporation method. The physical state of the dispersed Glb in the polymeric matrix was characterized by differential scanning calorimetry, X-ray diffraction, scanning electron microscope and Fourier transform infrared studies. In vitro drug release in buffer (pH 7.2) revealed that the amorphous solid dispersion at a Glb-P-188 ratio of 1:6 (SDE4) improved the dissolution of Glb by 90% within 3 h. A pharmacokinetic study of the solid dispersion formulation SDE4 in Wistar rats showed that the oral bioavailability of the drug was greatly increased as compared with the market tablet formulation, Daonil®. The formulation SDE4 resulted in an AUC0-24h ~2-fold higher. The SDE4 formulation was found to be stable during the study period of 6 months.

Experimental, Thermodynamic, and Molecular Modeling Evaluation of Amorphous Simvastatin-Poly(vinylpyrrolidone) Solid Dispersions

A crucial step for the selection of proper amorphous solid dispersion (ASD) matrix carriers is the in-depth assessment of drug/polymer physicochemical properties. In this context, the present study extends the work of previously published attempts by evaluating the formation of simvastatin (SIM)-poly(vinylpyrrolidone) (PVP) ASDs with the aid of thermodynamic and molecular modeling. Specifically, the implementation of both Flory-Huggins lattice theory and molecular dynamics (MD) simulations was able to predict the miscibility between the two components (a finding that was experimentally verified via differential scanning calorimetry (DSC) and hot stage polarized microscopy), while a complete temperature-concentration phase-transition profile was constructed, leading to the identification of the thermodynamically metastable and unstable ASD zones. Furthermore, as in the case of previously published reports, the analysis of the ASDs via Fourier transform infrared spectroscopy did not clarify the type and extent of observed molecular interactions. Hence, in the present study, a computer-based MD simulation model was developed for the first time in order to gain an insight into the properties of the observed interactions. MD amorphous assemblies of SIM, PVP, and their mixtures were initially developed, and the calculated glass transition temperatures were in close agreement with experimentally obtained results, indicating that the developed models could be considered as realistic representations of the actual systems. Furthermore, molecular interactions evaluation via radial distribution function and radius of gyration analysis revealed that increasing SIM content results in a significant PVP chain shrinkage, which eventually leads to SIM-SIM amorphous intermolecular interactions, leading to the formation of amorphous drug zones. Finally, MD-based results were experimentally verified via DSC.

Different BCS Class II Drug-Gelucire Solid Dispersions Prepared by Spray Congealing: Evaluation of Solid State Properties and In Vitro Performances

Delivery of poorly water soluble active pharmaceutical ingredients (APIs) by semi-crystalline solid dispersions prepared by spray congealing in form of microparticles (MPs) is an emerging method to increase their oral bioavailability. In this study, solid dispersions based on hydrophilic Gelucires^® (Gelucire^® 50/13 and Gelucire^® 48/16 in different ratio) of three BCS class II model compounds (carbamazepine, CBZ, tolbutamide, TBM, and cinnarizine, CIN) having different physicochemical properties (logP, pKa, Tm) were produced by spray congealing process. The obtained MPs were investigated in terms of morphology, particles size, drug content, solid state properties, drug-carrier interactions, solubility, and dissolution performances. The solid-state characterization showed that the properties of the incorporated drug had a profound influence on the structure of the obtained solid dispersion: CBZ recrystallized in a different polymorphic form, TBM crystallinity was significantly reduced as a result of specific interactions with the carrier, while smaller crystals were observed in case of CIN. The in vitro tests suggested that the drug solubility was mainly influenced by carrier composition, while the drug dissolution behavior was affected by the API solid state in the MPs after the spray congealing process. Among the tested APIs, TBM-Gelucire dispersions showed the highest enhancement in drug dissolution as a result of the reduced drug crystallinity.

Preparation of pharmaceutical cocrystal formulations via melt mixing technique: A thermodynamic perspective

The aim of the present study was to evaluate the thermodynamic properties of in-situ formation of cocrystal formulations by the melt-mixing method. Specifically, the thermodynamic mixing behaviour of carbamazepine-nicotinamide and ibuprofen-nicotinamide cocrystals prepared with the aid of Soluplus^® (SOL) were evaluated using thermodynamic lattice-based solution theories. Thermodynamic miscibility of both cocrystals with SOL was predicted by calculating Gibb's free energy based on the Flory-Huggins (FH) interaction parameter (χ), while the activity coefficient of cocrystals estimated with the aid of solid-liquid equilibrium equation and FH lattice theory, showed good thermodynamic miscibility of the components at elevated temperatures used normally during melt-mixing based processes. Complete phase transition diagrams constructed with the aid of DSC measurements and FH solution theory, suggested the existence of two transition zones: (1) a stable cocrystal zone, located at the right-hand-side of the spinodal phase separation curve, where stable cocrystals are prepared and (2) an unstable cocrystal zone, located at the left-hand-side of the spinodal curve up to liquidus, where the matrixforming polymer sets a kinetic barrier to recrystallization and hence, a barrier to the formation of cocrystals. The validity of the suggested thermodynamic phase transition zones was experimentally verified by ATR-FTIR and hot-stage polarized light microscopy.

Development of a binary carrier system consisting polyethylene glycol 4000 - ethyl cellulose for ibuprofen solid dispersion

Background and Objective

One of the established strategies to improve solubility and dissolution rate of poorly water-soluble drugs is solid dispersion (SD). Polyethylene glycol (PEG) is used as common carrier despite its stability problem which may be overcome by the addition of hydrophobic polymer. The present research aimed to develop an SD formulation with ibuprofen, a poor water-soluble BCS Class II drug as active pharmaceutical ingredient (API) and PEG 4000-ethyl cellulose (EC) as binary carrier.

Methods

Melt mixing SD method was employed using a ratio of API: binary carrier (1:3.5 w/w) (SD_PE). Another SD was prepared using only PEG (SD_P) as a carrier for comparative study. The developed formulation was evaluated using optical microscopy, scanning electron microscopy (SEM), determination of moisture content, differential scanning calorimetry (DSC), in vitro dissolution test, attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and flow properties.

Results

SEM and DSC indicated the conversion of crystalline ibuprofen to fine partly amorphous solid dispersion, which was responsible for the increase in dissolution rate of SD than a physical mixture. The release characteristics within 1 h from the higher to the lower value were the SD_PE> SD_P> physical mixture. Flow property evaluation using the angle of repose showed no difference between SD and PM. However, by Carr index and Hausner ratio, the flow properties of SD_PE was excellent.

Conclusion

The SD formulation with the PEG 4000-EC carrier can be effective to enhance in vitro dissolution of ibuprofen immediate release dosage form.

Acyclovir-Polyethylene Glycol 6000 Binary Dispersions: Mechanistic Insights

The dissolution and subsequent oral bioavailability of acyclovir (ACY) is limited by its poor aqueous solubility. An attempt has been made in this work to provide mechanistic insights into the solubility enhancement and dissolution of ACY by using the water-soluble carrier polyethylene glycol 6000 (PEG6000). Solid dispersions with varying ratios of the drug (ACY) and carrier (PEG6000) were prepared and evaluated by phase solubility, in vitro release studies, kinetic analysis, in situ perfusion, and in vitro permeation studies. Solid state characterization was done by powder X-ray diffraction (XRD), differential scanning calorimetry (DSC), and Fourier transform infrared (FTIR) analysis, and surface morphology was assessed by polarizing microscopic image analysis, scanning electron microscopy, atomic force microscopy, and nuclear magnetic resonance analysis. Thermodynamic parameters indicated the solubilization effect of the carrier. The aqueous solubility and dissolution of ACY was found to be higher in all samples. The findings of XRD, DSC, FTIR and NMR analysis confirmed the formation of solid solution, crystallinity reduction, and the absence of interaction between the drug and carrier. SEM and AFM analysis reports ratified the particle size reduction and change in the surface morphology in samples. The permeation coefficient and amount of ACY diffused were higher in samples in comparison to pure ACY. Stability was found to be higher in dispersions. The results suggest that the study findings provided clear mechanical insights into the solubility and dissolution enhancement of ACY in PEG6000, and such findings could lay the platform for resolving the poor aqueous solubility issues in formulation development.

Mechanistic insights into acyclovir-polyethylene glycol 20000 binary dispersions

Objective:

The objective of this study is to provide a mechanistic insight into solubility enhancement and dissolution of acyclovir (ACY) by polyethylene glycol20000 (PEG20000).

Materials and Methods:

Solid dispersions with differing ratios of drug (ACY) and carrier (PEG20000) were prepared and evaluated by phase solubility, in vitro release studies, kinetic analysis, in situ perfusion, and in vitro permeation studies. Solid state characterization was also done by Powder X-Ray Diffraction (PXRD), Differential Scanning Calorimetry (DSC), Fourier Transform Infrared spectroscopy (FT-IR) analysis and surface morphology was assessed by Polarizing Microscopic Image (PMI) analysis, Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and Nuclear Magnetic Resonance (NMR) analysis.

Results:

Thermodynamic parameters proved the solubilization effect of carrier. The aqueous solubility and dissolution of ACY were increased in all samples. Formation of solid solution, crystallinity reduction, and absence of interaction between drug and carrier was proved by XRD, DSC, and FTIR analysis. The particle size reduction and change in surface morphology were confirmed by SEM and AFM and analysis. The permeation coefficient and amount of drug diffused was higher in samples as compared to ACY. The stability was high in dispersions, and it was proved by NMR analysis.

Conclusion:

The mechanical insights into the enhancement of solubility and dissolution could be used as a platform to improve the aqueous solubility for other poor water soluble drugs.

Polymeric behavior evaluation of PVP K30-poloxamer binary carrier for solid dispersed nisoldipine by experimental design

CONTEXT

High melting point polymeric carrier without plasticizer is unacceptable for solid dispersion (SD) by melting method. Combined polymer-plasticizer carrier significantly affects drug solubility and tableting property of SD.

OBJECTIVE

To evaluate and optimize the combined effect of a binary carrier consisting PVP K30 and poloxamer 188, on nisoldipine solubility and tensile strength of amorphous SD compact (SD_compact) by experimental design.

MATERIALS AND METHODS

SD of nisoldpine (SD_nisol) was prepared by melt mixing with different PVP K30 and poloxamer amount. A 3² factorial design was employed using nisoldipine solubility and tensile strength of SD_compact as response variables. Statistical optimization by design expert software, and SD_nisol characterization using ATR FTIR, DSC and microscopy were done.

RESULTS

PVP K30:poloxamer, at a ratio of 3.73:6.63, was selected as the optimized combination of binary polymeric carrier resulting nisoldipine solubility of 115 μg/mL and tensile strength of 1.19 N/m².

DISCUSSION

PVP K30 had significant positive effect on both responses. Increase in poloxamer concentration after a certain level decreased nisoldipine solubility and tensile strength of SD_compact.

CONCLUSION

An optimized PVP K30-poloxamer binary composition for SD carrier was developed. Tensile strength of SD_compact can be considered as a response for experimental design to optimize SD.