Fibroblasts regulate osteoblasts through gap junctional communication

3D Mesoscopic Architecture of a Heterogeneous Cellular Network in the Cementum-Periodontal Ligament-Alveolar Bone Complex

Cell-to-cell communication orchestrates various cell and tissue functions. This communication enables cells to form cellular networks with each other through direct contact via intercellular junctions. Because these cellular networks are closely related to tissue and organ functions, elucidating the morphological characteristics of cellular networks could lead to the development of novel therapeutic approaches. The tooth, periodontal ligament (PDL), and alveolar bone form a complex via collagen fibres. Teeth depend on the co-ordinated activity of this complex to maintain their function, with cellular networks in each of its three components. Imaging methods for three-dimensional (3D) mesoscopic architectural analysis include focused ion beam/scanning electron microscopy (FIB/SEM), which is characterised by its ability to select observation points and acquire data from complex tissue after extensive block-face imaging, without the need to prepare numerous ultrathin sections. Previously, we employed FIB/SEM to analyse the 3D mesoscopic architecture of hard tissue including the PDL, which exists between the bone and tooth root. The imaging results showed that the cementum, PDL, and alveolar bone networks are in contact and form a heterogeneous cellular network. This cellular network may orchestrate mechanical loading-induced remodelling of the cementum-PDL-alveolar bone complex as the remodelling of each complex component is coordinated, as exemplified by tooth movement due to orthodontic treatment and tooth dislocation due to occlusal loss. In this review, we summarise and discuss the 3D mesoscopic architecture of cellular networks in the cementum, PDL, and alveolar bone as observed in our recent mesoscopic and morphological studies.

Antibacterial Titanium Implants Biofunctionalized by Plasma Electrolytic Oxidation with Silver, Zinc, and Copper: A Systematic Review

Patients receiving orthopedic implants are at risk of implant-associated infections (IAI). A growing number of antibiotic-resistant bacteria threaten to hamper the treatment of IAI. The focus has, therefore, shifted towards the development of implants with intrinsic antibacterial activity to prevent the occurrence of infection. The use of Ag, Cu, and Zn has gained momentum as these elements display strong antibacterial behavior and target a wide spectrum of bacteria. In order to incorporate these elements into the surface of titanium-based bone implants, plasma electrolytic oxidation (PEO) has been widely investigated as a single-step process that can biofunctionalize these (highly porous) implant surfaces. Here, we present a systematic review of the studies published between 2009 until 2020 on the biomaterial properties, antibacterial behavior, and biocompatibility of titanium implants biofunctionalized by PEO using Ag, Cu, and Zn. We observed that 100% of surfaces bearing Ag (Ag-surfaces), 93% of surfaces bearing Cu (Cu-surfaces), 73% of surfaces bearing Zn (Zn-surfaces), and 100% of surfaces combining Ag, Cu, and Zn resulted in a significant (i.e., >50%) reduction of bacterial load, while 13% of Ag-surfaces, 10% of Cu-surfaces, and none of Zn or combined Ag, Cu, and Zn surfaces reported cytotoxicity against osteoblasts, stem cells, and immune cells. A majority of the studies investigated the antibacterial activity against S. aureus. Important areas for future research include the biofunctionalization of additively manufactured porous implants and surfaces combining Ag, Cu, and Zn. Furthermore, the antibacterial activity of such implants should be determined in assays focused on prevention, rather than the treatment of IAIs. These implants should be tested using appropriate in vivo bone infection models capable of assessing whether titanium implants biofunctionalized by PEO with Ag, Cu, and Zn can contribute to protect patients against IAI.

Robust phenotypic maintenance of limb cells during heterogeneous culture in a physiologically relevant polymeric-based constructed graft system

A major challenge during the simultaneous regeneration of multiple tissues is the ability to maintain the phenotypic characteristics of distinct cell populations on one construct, especially in the presence of different exogenous soluble cues such as growth factors. Therefore, in this study, we questioned whether phenotypic maintenance over a distinct population of cells can be achieved by providing biomimetic structural cues relevant to each cell phenotype into the construct's design and controlling the presentation of growth factors in a region-specific manner. To address this question, we developed a polymeric-based constructed graft system (CGS) as a physiologically relevant model that consists of three combined regions with distinct microstructures and growth factor types. Regions A and B of the CGS exhibited similar microstructures to the skin and soft tissues and contained rhPDGF-BB and rhIGF-I, while region C exhibited a similar microstructure to the bone tissue and contained rhBMP-2. Primary rat skin fibroblasts, soft tissue fibroblasts, and osteoblasts were then cultured on regions A, B, and C of the CGS, respectively and their phenotypic characteristics were evaluated in this heterogenous environment. In the absence of growth factors, we found that the structural cues presented in every region played a key role in maintaining the region-specific cell functions and heterogeneity during a heterogeneous culture. In the presence of growth factors, we found that spatially localizing the growth factors at their respective regions resulted in enhanced region-specific cell functions and maintained region-specific cell heterogeneity compared to supplementation, which resulted in a significant reduction of cell growth and loss of phenotype. Our data suggest that providing biomimetic structural cues relevant to each cell phenotype and controlling the presentation of growth factors play a crucial role in ensuring heterogeneity maintenance of distinct cell populations during a heterogeneous culture. The presented CGS herein provides a reliable platform for investigating different cells responses to heterogeneous culture in a physiologically relevant microenvironment. In addition, the model provides a unique platform for evaluating the feasibility and efficacy of different approaches for simultaneously delivering multiple growth factors or molecules from a single construct to achieve enhanced cell response while maintaining cellular heterogeneity during a heterogenous culture.

Correlative imaging of collagen fibers and fibroblasts using CLEM optimized for picrosirius red staining and FIB/SEM tomography

Conventional imaging for three-dimensional (3D) ultra-architectural analysis of collagen fibers and fibroblasts is time-consuming and requires numerous ultrathin sections to search the target area. Currently, no method allows 3D ultra-architectural analysis of predetermined areas including spatial relationships between collagen fibers and fibroblasts in vitro. Herein, we developed a new method for in vitro analysis of the 3D ultrastructure of fibroblasts and collagen fibers using CLEM optimized for picrosirius red staining and FIB/SEM tomography. Collagen fibers were observed between, rather than on top of, stacked cells. This method offers the advantage of mesoscopic and ultrastructural analysis, thus minimizing bias and ensuring accurate observation.

Three-dimensional ultrastructural and histomorphological analysis of the periodontal ligament with occlusal hypofunction via focused ion beam/scanning electron microscope tomography

The periodontal ligament (PDL) maintains the environment and function of the periodontium. The PDL has been remodelled in accordance with changes in mechanical loading. Three-dimensional (3D) structural data provide essential information regarding PDL function and dysfunction. However, changes in mechanical loading associated with structural changes in the PDL are poorly understood at the mesoscale. This study aimed to investigate 3D ultrastructural and histomorphometric changes in PDL cells and fibres associated with unloading condition (occlusal hypofunction), using focused ion beam/scanning electron microscope tomography, and to quantitatively analyse the structural properties of PDL cells and fibres. PDL cells formed cellular networks upon morphological changes induced via changes in mechanical loading condition. Drastic changes were observed in a horizontal array of cells, with a sparse and disorganised area of collagen bundles. Furthermore, collagen bundles tended to be thinner than those in the control group. FIB/SEM tomography enables easier acquisition of serial ultrastructural images and quantitative 3D data. This method is powerful for revealing 3D architecture in complex tissues. Our results may help elucidate architectural changes in the PDL microenvironment during changes in mechanical loading condition and regeneration, and advance a wide variety of treatments in dentistry.

Three-dimensional ultrastructural analysis of cells in the periodontal ligament using focused ion beam/scanning electron microscope tomography

The accurate comprehension of normal tissue provides essential data to analyse abnormalities such as disease and regenerative processes. In addition, understanding the proper structure of the target tissue and its microenvironment may facilitate successful novel treatment strategies. Many studies have examined the nature and structure of periodontal ligaments (PDLs); however, the three-dimensional (3D) structure of cells in normal PDLs remains poorly understood. In this study, we used focused ion beam/scanning electron microscope tomography to investigate the whole 3D ultrastructure of PDL cells along with quantitatively analysing their structural properties and ascertaining their orientation to the direction of the collagen fibre. PDL cells were shown to be in contact with each other, forming a widespread mesh-like network between the cementum and the alveolar bone. The volume of the cells in the horizontal fibre area was significantly larger than in other areas, whereas the anisotropy of these cells was lower than in other areas. Furthermore, the orientation of cells to the PDL fibres was not parallel to the PDL fibres in each area. As similar evaluations are recognized as being challenging using conventional two-dimensional methods, these novel 3D findings may contribute necessary knowledge for the comprehensive understanding and analysis of PDLs.

Effects of extremely low-frequency magnetotherapy on proliferation of human dermal fibroblasts

Extremely low-frequency electromagnetic fields (ELF-EMFs) applied in magnetotherapy have frequency lower than 100 Hz and magnetic field intensity ranging from 0.1 to 20 mT. For many years, the use of magnetotherapy in clinics has been increasing because of its beneficial effects in many processes, e.g., skin diseases, inflammation and bone disorders. However, the understanding of the microscopic mechanisms governing such processes is still lacking and the results of the studies on the effects of ELF-EMFs are controversial because effects derive from different conditions and from intrinsic responsiveness of different cell types.In the present study, we studied the biological effects of 1.5 h exposure of human dermal fibroblasts to EMFs with frequencies of 5 and 50 Hz and intensity between 0.25 and 1.6 mT. Our data showed that the magnetic treatment did not produce changes in cell viability, but gave evidence of a sizeable decrease in proliferation at 24 h after treatment. In addition, immunofluorescence experiments displayed an increase in tubulin expression that could foreshadow changes in cell motility or morphology. The decrease in proliferation with unchanged viability and increase in tubulin expression could be consistent with the triggering of a transdifferentiation process after the exposure to ELF-EMFs.

Connexins and pannexins in the skeleton: gap junctions, hemichannels and more

Regulation of bone homeostasis depends on the concerted actions of bone-forming osteoblasts and bone-resorbing osteoclasts, controlled by osteocytes, cells derived from osteoblasts surrounded by bone matrix. The control of differentiation, viability and function of bone cells relies on the presence of connexins. Connexin43 regulates the expression of genes required for osteoblast and osteoclast differentiation directly or by changing the levels of osteocytic genes, and connexin45 may oppose connexin43 actions in osteoblastic cells. Connexin37 is required for osteoclast differentiation and its deletion results in increased bone mass. Less is known on the role of connexins in cartilage, ligaments and tendons. Connexin43, connexin45, connexin32, connexin46 and connexin29 are expressed in chondrocytes, while connexin43 and connexin32 are expressed in ligaments and tendons. Similarly, although the expression of pannexin1, pannexin2 and pannexin3 has been demonstrated in bone and cartilage cells, their function in these tissues is not fully understood.

Influence of cyclical mechanical loading on osteogenic markers in an osteoblast-fibroblast co-culture in vitro: tendon-to-bone interface in anterior cruciate ligament reconstruction

PURPOSE

We aimed to evaluate the influence of cyclical mechanical loading on osteoblasts and fibroblasts, and co-cultures of both in vitro, simulating the conditions of the tendon-to-bone interface in anterior cruciate ligament reconstruction.

METHODS

Osteoblast-like cells (OBL) and tendon-derived rodent fibroblasts (TDF) were cultured alone or in co-culture to simulate the tendon-to-bone interface. Cyclical loading was applied for one hour twice a day for three days, with a frequency of 1 Hz and 3 % strain. Alkaline phosphatase (AP), osteocalcin (OC), collagen type 1 (COL1A1), and bone morphogenetic protein 2 (BMP-2) gene expression and protein deposition were detected by real-time polymerase chain reaction (qPCR) and immunocytochemical analysis.

RESULTS

Mechanical loading significantly decreased AP, OC, and COL1A1 gene expression in both OBL and TDF, compared to non-loaded culture. However, mechanical load increased gene expression of the same marker genes including BMP-2 during co-culture. Immunocytochemistry demonstrated increased deposition of corresponding proteins in the same range, independent of culture conditions. Higher depositions of BMP-2 were shown under loading conditions for osteoblast and TDF monocultures. Prolongation of mechanical loading resulted in cell detachment and spheroid formation.

CONCLUSION

Cyclical mechanical loading caused downregulation of genes involved in osteointegration and osteoinduction, such as OC, ALP, and COL1A1 in monocultures of osteoblasts and fibroblasts; co-cultures lacked this phenomenon. Immunocytochemistry and qPCR analysis showed slight upregulations of marker genes and corresponding proteins. This might be due to the potential stabilising effects of osteoblast-fibroblast cross talk in the co-culture environment, simulating fibrocartilage formation at the tendon-to-bone interface.