1
|
Maitra J, Bhardwaj N. Development of bio-based polymeric blends - a comprehensive review. JOURNAL OF BIOMATERIALS SCIENCE. POLYMER EDITION 2024:1-35. [PMID: 39250518 DOI: 10.1080/09205063.2024.2394300] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/04/2024] [Accepted: 08/15/2024] [Indexed: 09/11/2024]
Abstract
The current impetus to develop bio-based polymers for greater sustainability and lower carbon footprint is necessitated due to the alarming depletion of fossil resources, concurrent global warming, and related environmental issues. This article reviews the development of polymeric blends based on bio-based polymers. The focus on bio-based polymers is due to their greater 'Sustainability factor' as they are derived from renewable resources. The article delves into the synthesis of both conventional and highly biodegradable bio-based polymers, each crafted from feedstocks derived from nature's bounty. What sets this work apart is the exploration of blending existing bio-based polymers, culminating in the birth of entirely new materials. This review provides a comprehensive overview of the recent advancements in the development of bio-based polymeric blends, covering their synthesis, properties, applications, and potential contributions to a more sustainable future. Despite their potential benefits, bio-based materials face obstacles such as miscibility, processability issues and disparities in physical properties compared to conventional counterparts. The paper also discusses significance of compatibilizers, additives and future directions for the further advancement of these bio-based blends. While bio-based polymer blends hold promise for environmentally benign applications, many are still in the research phase. Ongoing research and technological innovations are driving the evolution of these blends as viable alternatives, but continued efforts are needed to ensure their successful integration into mainstream industrial practices. Concerted efforts from both researchers and industry stakeholders are essential to realize the full potential of bio-based polymers and accelerate their adoption on a global scale.
Collapse
Affiliation(s)
- Jaya Maitra
- Department of Applied Chemistry, Gautam Buddha University, Greater Noida, Uttar Pradesh, India
| | - Nikita Bhardwaj
- Department of Applied Chemistry, Gautam Buddha University, Greater Noida, Uttar Pradesh, India
| |
Collapse
|
2
|
Muñoz EC, Patiño AO, Marín DJ, Cadavid LM, Ortega Quiroga L, Gonzalez Lopera D, Donado Gómez JH. Immediate Impact on Tear Osmolarity Following the Application of Different Ocular Lubricants in Patients Experiencing Moderate Dry Eye Symptoms. Cornea 2024; 43:1040-1043. [PMID: 38488642 DOI: 10.1097/ico.0000000000003493] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/09/2023] [Accepted: 01/01/2024] [Indexed: 07/02/2024]
Abstract
PURPOSE This study addresses the growing concern of Dry Eye Disease (DED), which has become increasingly prevalent due to modern lifestyles characterized by prolonged screen usage, global warming, polypharmacy, and extended life expectancy. METHODS Grounded in the Dry Eye Workshop II (DEWSII) diagnosis framework, the study focuses on DED as a multifactorial condition affecting the ocular surface's tear film homeostasis. The study evaluates the short-term impact of 5 commercially available ocular lubricants on disrupting the hyperosmolar environment and determine whether these lubricants can offer potential treatment benefits for DED. RESULTS Conducted on 300 eyes (from 150 patients) with 5 preservative-free lubricants compared to a control group, the study reveals that all lubricants effectively reduced tear film osmolarity within 15 minutes of application. Notably, the control group exhibited an increase in average osmolarity (+0.98 mOsm/L) without lubricant use. Siccafluid demonstrated the most substantial osmolarity reduction after 15 minutes, with an average decrease of 11.54 mOsm/L. Statistical significance was observed for Siccafluid, Optive Fusion unique dose (UD), and Systane Ultra UD, while Hyabak and Freegen preservative free (PF) showed lower significance. CONCLUSIONS Emphasizing the importance of disrupting the hyperosmolar environment to break the cycle of inflammation, the study concludes that ocular lubricants, at least as an immediate post-application effect, can interrupt this cycle and improve the hyperosmolar environment of the ocular surface.
Collapse
Affiliation(s)
- Edwin Correa Muñoz
- Department of Ophthalmology, Universidad Pontificia Bolivariana, Medellín, Colombia
| | | | | | | | | | | | | |
Collapse
|
3
|
Yoshida M, Iwase H, Horikawa Y, Shikata T. Evidence of a Rod-like Structure for Hydroxypropyl Cellulose Samples in Aqueous Solution. Biomacromolecules 2024; 25:4255-4266. [PMID: 38814246 DOI: 10.1021/acs.biomac.4c00334] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/31/2024]
Abstract
Because hydroxypropyl cellulose (HpC) is a popular polymeric material that forms a liquid crystalline phase in solutions with various kinds of solvents, including water, it is commonly thought that HpC has a typical rod-like structure in solution. In this study, the structures of commercial HpC samples in aqueous solution with average molar substitution numbers (MS) ranging from 3.6 to 3.9 and weight-average molar masses (Mw) ranging from 36 to 740 kg mol-1 were investigated in detail. We first used multiple techniques, including standard static and dynamic light scattering (SLS and DLS), neutron and X-ray scattering experiments, and viscometric measurements, to obtain clear evidence of rod-like structures quantitatively. The dependence of excess scattering intensities for HpC samples under dilute conditions on the magnitude of the scattering vector over a wide range from 8.9 × 10-3 to 3.0 × 10 nm-1 was reasonably described by the form factor of rod particles with length (L) and diameter (d). Although the determined L value was close to the contour length (lc) calculated from the Mw values in the lower Mw range, L became obviously less than lc with increasing Mw. The radius of gyration (Rg) determined via SLS measurements was proportional to L by a factor of approximately 3.5 ∼ √12 over the Mw range examined. These observations revealed that the conformation of HpC molecules changes from an elongated single chain to a certain folded structure, maintaining the shape of the rod-shaped particles. Moreover, the Mw dependencies of the intrinsic viscosities and translational diffusion coefficients of the HpC samples resulting from DLS measurements were reasonably described with a theoretical rod-like particle model, assuming that L and d are identical to those resulting from the scattering behaviors.
Collapse
Affiliation(s)
- Misato Yoshida
- Cellulose Research Unit, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu, Tokyo 183-8509, Japan
- Division of Natural Resources and Eco-materials, Graduate School of Agriculture, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu, Tokyo 183-8509, Japan
| | - Hiroki Iwase
- Neutron Science and Technology Center, Comprehensive Research Organization for Science and Society (CROSS), 162-1 Shirakata, Tokai, Ibaraki 319-1106, Japan
| | - Yoshiki Horikawa
- Cellulose Research Unit, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu, Tokyo 183-8509, Japan
- Division of Natural Resources and Eco-materials, Graduate School of Agriculture, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu, Tokyo 183-8509, Japan
| | - Toshiyuki Shikata
- Cellulose Research Unit, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu, Tokyo 183-8509, Japan
- Division of Natural Resources and Eco-materials, Graduate School of Agriculture, Tokyo University of Agriculture and Technology, 3-5-8 Saiwai-cho, Fuchu, Tokyo 183-8509, Japan
| |
Collapse
|
4
|
Lee S, Son M, Lee J, Byun I, Kim JW, Kim J, Seonwoo H. Computational Fluid Dynamics Analysis and Empirical Evaluation of Carboxymethylcellulose/Alginate 3D Bioprinting Inks for Screw-Based Microextrusion. Polymers (Basel) 2024; 16:1137. [PMID: 38675055 PMCID: PMC11054610 DOI: 10.3390/polym16081137] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/11/2024] [Revised: 04/15/2024] [Accepted: 04/16/2024] [Indexed: 04/28/2024] Open
Abstract
Three-dimensional microextrusion bioprinting technology uses pneumatics, pistons, or screws to transfer and extrude bioinks containing biomaterials and cells to print biological tissues and organs. Computational fluid dynamics (CFD) analysis can simulate the flow characteristics of bioinks in a control volume, and the effect on cell viability can be predicted by calculating the physical quantities. In this study, we developed an analysis system to predict the effect of a screw-based dispenser system (SDS) on cell viability in bioinks through rheological and CFD analyses. Furthermore, carboxymethylcellulose/alginate-based bioinks were used for the empirical evaluation of high-viscous bioinks. The viscosity of bioinks was determined by rheological measurement, and the viscosity coefficient for the CFD analysis was derived from a correlation equation by non-linear regression analysis. The mass flow rate derived from the analysis was successfully validated by comparison with that from the empirical evaluation. Finally, the cell viability was confirmed after bioprinting with bioinks containing C2C12 cells, suggesting that the developed SDS may be suitable for application in the field of bioengineering. Consequently, the developed bioink analysis system is applicable to a wide range of systems and materials, contributing to time and cost savings in the bioengineering industry.
Collapse
Affiliation(s)
- Sungmin Lee
- Department of Human Harmonized Robotics, College of Engineering, Sunchon National University, Suncheon 57922, Republic of Korea
- Interdisciplinary Program in IT-Bio Convergence System, Sunchon National University, Suncheon 57922, Republic of Korea
| | - Minjae Son
- Department of Aerospace Engineering, Graduate School, College of Engineering, Sunchon National University, Suncheon 57922, Republic of Korea
| | - Juo Lee
- Interdisciplinary Program in IT-Bio Convergence System, Sunchon National University, Suncheon 57922, Republic of Korea
- Department of Animal Science & Technology, College of Life Sciences and Natural Resources, Sunchon National University, Suncheon 57922, Republic of Korea
| | - Iksong Byun
- Interdisciplinary Program in IT-Bio Convergence System, Sunchon National University, Suncheon 57922, Republic of Korea
- Department of Agricultural Machinery Engineering, College of Life Sciences and Natural Resources, Sunchon National University, Suncheon 57922, Republic of Korea
| | - Jin-Woo Kim
- Department of Biological & Agricultural Engineering, University of Arkansas, Fayetteville, AR 72701, USA
- Materials Science & Engineering Program, University of Arkansas, Fayetteville, AR 72701, USA
| | - Jungsil Kim
- Department of Smart Bio-Industrial Mechanical Engineering, College of Agriculture and Life Sciences, Kyungpook National University, Daegu 41566, Republic of Korea
| | - Hoon Seonwoo
- Interdisciplinary Program in IT-Bio Convergence System, Sunchon National University, Suncheon 57922, Republic of Korea
- Department of Convergent Biosystems Engineering, College of Life Science and Natural Resources, Sunchon National University, Suncheon 57922, Republic of Korea
| |
Collapse
|
5
|
Remígio MSDN, Greco T, Silva Júnior JOC, Converti A, Ribeiro-Costa RM, Rossi A, Barbosa WLR. Spray-Drying Microencapsulation of Bauhinia ungulata L. var. obtusifolia Aqueous Extract Containing Phenolic Compounds: A Comparative Study Using Different Wall Materials. Pharmaceutics 2024; 16:488. [PMID: 38675149 PMCID: PMC11054010 DOI: 10.3390/pharmaceutics16040488] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/03/2024] [Revised: 03/03/2024] [Accepted: 03/08/2024] [Indexed: 04/28/2024] Open
Abstract
Species belonging to the Bauhinia genus, usually known as "pata-de-vaca", are popularly used to treat diabetes. Bauhinia ungulata var. obtusifolia (Ducke) Vaz is among them, of which the leaves are used as a tea for medicinal purposes in the Amazon region. A microencapsulation study of lyophilized aqueous extract from Bauhinia ungulata leaves, which contain phenolic compounds, using five different wall materials (maltodextrin DE 4-7, maltodextrin DE 11-14; β-cyclodextrin; pectin and sodium carboxymethylcellulose) is described in this paper. The microstructure, particle size distribution, thermal behavior, yield, and encapsulation efficiency were investigated and compared using different techniques. Using high-performance liquid chromatography, phenolics, and flavonoids were detected and quantified in the microparticles. The microparticles obtained with a yield and phenolics encapsulation efficiency ranging within 60-83% and 35-57%, respectively, showed a particle size distribution between 1.15 and 5.54 µm, spherical morphology, and a wrinkled surface. Among them, those prepared with sodium carboxymethylcellulose or pectin proved to be the most thermally stable. They had the highest flavonoid content (23.07 and 21.73 mg RUTE/g Extract) and total antioxidant activity by both the DPPH (376.55 and 367.86 µM TEq/g Extract) and ABTS (1085.72 and 1062.32 µM TEq/g Extract) assays. The chromatographic analyses allowed for quantification of the following substances retained by the microparticles, chlorogenic acid (1.74-1.98 mg/g Extract), p-coumaric acid (0.06-0.08 mg/g Extract), rutin (11.2-12.9 mg/g Extract), and isoquercitrin (0.49-0.53 mg/g Extract), compounds which considered to responsible for the antidiabetic property attributed to the species.
Collapse
Affiliation(s)
- Myrth Soares do Nascimento Remígio
- Laboratory of Chromatography and Mass Spectrometry, Graduate Program in Pharmaceutical Innovation, Institute of Health Sciences, Federal University of Pará, Belém 66075-110, Brazil;
- Department of Food and Drug, University of Parma, 43124 Parma, Italy
| | - Teresa Greco
- Department of Food and Drug, University of Parma, 43124 Parma, Italy
| | - José Otávio Carréra Silva Júnior
- Laboratory of R&D Pharmaceutical and Cosmetic, Graduate Program in Pharmaceutical Innovation, Institute of Health Sciences, Federal University of Pará, Belém 66075-110, Brazil;
| | - Attilio Converti
- Department of Civil, Chemical and Environmental Engineering, Pole of Chemical Engineering, University of Genoa, 16145 Genoa, Italy;
| | - Roseane Maria Ribeiro-Costa
- Laboratory of Nanotechnology, Graduate Program in Pharmaceutical Innovation, Institute of Health Sciences, Federal University of Pará, Belém 66075-110, Brazil;
| | - Alessandra Rossi
- Department of Food and Drug, University of Parma, 43124 Parma, Italy
| | - Wagner Luiz Ramos Barbosa
- Laboratory of Chromatography and Mass Spectrometry, Graduate Program in Pharmaceutical Innovation, Institute of Health Sciences, Federal University of Pará, Belém 66075-110, Brazil;
| |
Collapse
|
6
|
Gong J, Hou L, Ching YC, Ching KY, Hai ND, Chuah CH. A review of recent advances of cellulose-based intelligent-responsive hydrogels as vehicles for controllable drug delivery system. Int J Biol Macromol 2024; 264:130525. [PMID: 38431004 DOI: 10.1016/j.ijbiomac.2024.130525] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/12/2023] [Revised: 02/17/2024] [Accepted: 02/27/2024] [Indexed: 03/05/2024]
Abstract
To realize the maximum therapeutic activity of medicine and protect the body from the adverse effects of active ingredients, drug delivery systems (DDS) featured with targeted transportation sites and controllable release have captured extensive attention over the past decades. Hydrogels with unique three-dimensional (3D) porous structures present tunable capacity, controllable degradation, various stimuli sensitivity, therapeutic agents encapsulation, and loaded drugs protection properties, which endow hydrogels with bred-in-the-bone advantages as vehicles for drug delivery. In recent years, with the impressive consciousness of the "back-to-nature" concept, biomass materials are becoming the 'rising star' as the hydrogels building blocks for controlled drug release carriers due to their biodegradability, biocompatibility, and non-toxicity properties. In particular, cellulose and its derivatives are promising candidates for fabricating hydrogels as their rich sources and high availability, and various smart cellulose-based hydrogels as targeted carriers under exogenous such as light, electric field, and magnetic field or endogenous such as pH, temperature, ionic strength, and redox gradients. In this review, we summarized the main synthetic strategies of smart cellulose-based hydrogels including physical and chemical cross-linking, and illustrated the detailed intelligent-responsive mechanism of hydrogels in DDS under external stimulus. Additionally, the ongoing development and challenges of cellulose-based hydrogels in the biomedical field are also presented.
Collapse
Affiliation(s)
- Jingwei Gong
- Department of Chemical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur 50603, Malaysia
| | - Leilei Hou
- Department of Catalytic Chemistry and Engineering, State key-laboratory of fine chemicals, Dalian University of Technology, Dalian 116034, People's Republic of China
| | - Yern Chee Ching
- Department of Chemical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur 50603, Malaysia.
| | - Kuan Yong Ching
- University of Reading Malaysia, Kota Ilmu, Persiaran Graduan, Educity, 79200 Nusajaya, Johor, Malaysia
| | - Nguyen Dai Hai
- Institute of Chemical Technology, Vietnam Academy of Science and Technology, Department of Biomaterials & Bioengineering, Ho Chi Minh City, Viet Nam
| | - Cheng Hock Chuah
- Department of Chemistry, Faculty of Science, University of Malaya, Kuala Lumpur 50603, Malaysia
| |
Collapse
|
7
|
Lu A, Li S. Polysaccharides as a Hydrophilic Building Block of Amphiphilic Block Copolymers for the Conception of Nanocarriers. Pharmaceutics 2024; 16:467. [PMID: 38675130 PMCID: PMC11054713 DOI: 10.3390/pharmaceutics16040467] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/16/2024] [Revised: 03/19/2024] [Accepted: 03/21/2024] [Indexed: 04/28/2024] Open
Abstract
Polysaccharides are gaining increasing attention for their relevance in the production of sustainable materials. In the domain of biomaterials, polysaccharides play an important role as hydrophilic components in the design of amphiphilic block copolymers for the development of drug delivery systems, in particular nanocarriers due to their outstanding biocompatibility, biodegradability, and structural versatility. The presence of a reducing end in polysaccharide chains allows for the synthesis of polysaccharide-based block copolymers. Compared with polysaccharide-based graft copolymers, the structure of block copolymers can be more precisely controlled. In this review, the synthesis methods of polysaccharide-based amphiphilic block copolymers are discussed in detail, taking into consideration the structural characteristics of polysaccharides. Various synthetic approaches, including reductive amination, oxime ligation, and other chain-end modification reactions, are explored. This review also focuses on the advantages of polysaccharides as hydrophilic blocks in polymeric nanocarriers. The structure and unique properties of different polysaccharides such as cellulose, hyaluronic acid, chitosan, alginate, and dextran are described along with examples of their applications as hydrophilic segments in the synthesis of amphiphilic copolymers to construct nanocarriers for sustained drug delivery.
Collapse
Affiliation(s)
- Aijing Lu
- NMPA Key Laboratory for Quality Research and Control of Tissue Regenerative Biomaterial & NMPA Research Base of Regulatory Science for Medical Devices, Institute of Regulatory Science for Medical Devices, Sichuan University, Chengdu 610064, China;
| | - Suming Li
- Institut Européen des Membranes, UMR CNRS 5635, Université de Montpellier, 34095 Montpellier, France
| |
Collapse
|
8
|
Han T, Ju B, Zhang S. Catalyst-free readily dual-recyclable acetal-based covalent adaptable cellulose networks. Int J Biol Macromol 2024; 261:129563. [PMID: 38278382 DOI: 10.1016/j.ijbiomac.2024.129563] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/02/2023] [Revised: 12/18/2023] [Accepted: 01/15/2024] [Indexed: 01/28/2024]
Abstract
Despite covalent adaptable networks (CANs) imparting the favorable features of crosslinked polymers, as well as the functionality of reprocessing, reshaping and welding, due to exchange reaction enabled topology changes; it is still a huge challenge to design catalyst-free, fast reprocessing, controlled degradation and polymer recyclable biomass base CANs. Herein, for the first time, acetal-based covalent adaptable cellulose networks (ACCs) were utilized to synthesize readily reconstructable cellulose-based thermosets with mechanical tunability. ACCs were synthesized via catalyst-free "click" addition of cellulose and divinyl ether without releasing small molecule byproducts. Different crosslinking densities and crosslinkers were used to explore the structure-property relationship, the mechanical and thermal properties of the ACCs were strongly influenced by these factors. ACCs can obtain enhanced tensile strength or elongation at break by changing the structure of the crosslinker. Furthermore, the reworking, welding and shape memory properties of these ACCs, based on the dynamic exchange reaction of acetal bonds, were investigated. In addition, these ACCs can be degraded under acidic conditions, and closed-loop utilization of polymer was possible. Thus, ACCs can be mechanically and chemically double-cycled, which will contribute to solving the white pollution problem and resource waste as a new class of sustainable plastics.
Collapse
Affiliation(s)
- Tengfei Han
- State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116024, China
| | - Benzhi Ju
- State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116024, China.
| | - Shufen Zhang
- State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116024, China.
| |
Collapse
|
9
|
Brockmann T, Simon A, Brockmann C, Fuchsluger TA, Pleyer U, Walckling M. [Corneal wound healing-Pharmacological treatment]. DIE OPHTHALMOLOGIE 2024; 121:245-258. [PMID: 38411733 DOI: 10.1007/s00347-024-02021-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Accepted: 02/02/2024] [Indexed: 02/28/2024]
Abstract
Physiological wound healing of the cornea is a complex process and involves numerous multifactorial tissue processes. A proper wound healing, especially without the formation of light-scattering scars, is essential to preserve the integrity and function of the cornea. Misdirected wound healing is of vast clinical relevance as it can lead to corneal fibrosis and the loss of optical transparency with subsequent reduction of visual acuity, up to blindness. In addition to the understanding of the pathophysiological mechanisms, the knowledge of therapeutic concepts and options for treating corneal wound healing disorders and fibrosis is essential to counteract a permanent damage of the cornea as early as possible. Nowadays, various pharmacological and surgical options are available for treatment. The decision, appropriate selection and indication for the optimal treatment depend primarily on the genesis and clinical appearance of the corneal wound, fibrosis or scar. The treatment of wound healing disorders ranges from the use of topical therapy and supportive measures up to tissue replacement procedures. As long as the mechanical stability of the cornea is intact and wound healing processes are still ongoing, a pharmacological modulation is reasonable, which is discussed in this article.
Collapse
Affiliation(s)
- Tobias Brockmann
- Klinik und Poliklinik für Augenheilkunde, Universitätsmedizin Rostock, Doberaner Str. 140, 18057, Rostock, Deutschland.
- Fachbereich SciTec, Ernst-Abbe-Hochschule Jena, Carl-Zeiss-Promenade 2, 07745, Jena, Deutschland.
| | - Alexander Simon
- Fachbereich SciTec, Ernst-Abbe-Hochschule Jena, Carl-Zeiss-Promenade 2, 07745, Jena, Deutschland
| | - Claudia Brockmann
- Klinik und Poliklinik für Augenheilkunde, Universitätsmedizin Rostock, Doberaner Str. 140, 18057, Rostock, Deutschland
| | - Thomas A Fuchsluger
- Klinik und Poliklinik für Augenheilkunde, Universitätsmedizin Rostock, Doberaner Str. 140, 18057, Rostock, Deutschland
| | - Uwe Pleyer
- Department of Ophthalmology, Charité - Universitätsmedizin Berlin, corporate member of Freie Universität Berlin und Humboldt-Universität zu Berlin, Augustenburger Platz 1, 13353, Berlin, Deutschland
- Berlin Institute of Health at Charité - Universitätsmedizin Berlin, Charitéplatz 1, 10117, Berlin, Deutschland
| | - Marcus Walckling
- Klinik und Poliklinik für Augenheilkunde, Universitätsmedizin Rostock, Doberaner Str. 140, 18057, Rostock, Deutschland
| |
Collapse
|
10
|
Wang W, Liu J, Xu H, Zhang Y, Mao X, Huang WC. Characterization and comparison of carboxymethylation and TEMPO-mediated oxidation for polysaccharides modification. Int J Biol Macromol 2024; 256:128322. [PMID: 38000579 DOI: 10.1016/j.ijbiomac.2023.128322] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/31/2023] [Revised: 10/18/2023] [Accepted: 11/16/2023] [Indexed: 11/26/2023]
Abstract
In this study, carboxymethylation and TEMPO-mediated oxidation were compared for their ability to introduce carboxyl groups to polysaccharides, using cellulose and chitin as model polysaccharides. The carboxyl group contents and changes in the molecular weight of carboxymethylated and TEMPO-oxidized cellulose/chitin were measured. The results revealed that carboxymethylation achieved higher carboxyl group contents, with values of 4.99 mmol/g for cellulose and 4.46 mmol/g for chitin, whereas for TEMPO-oxidized cellulose and chitin, the values were 1.64 mmol/g and 1.12 mmol/g, respectively. As a consequence of TEMPO-mediated oxidation, polysaccharides underwent degradation, leading to a decrease in the molecular weight of 42.46 % for oxidized cellulose and 64.5 % for oxidized chitin. Additionally, the crystallinity of carboxymethylated polysaccharides decreased with an increase in the carboxyl group contents, whereas that of TEMPO-oxidized polysaccharides remained unchanged. Furthermore, TEMPO-mediated oxidation selectively oxidized C6 primary hydroxyls, while carboxylmethylation converted all the hydroxyl groups on the polysaccharides.
Collapse
Affiliation(s)
- Wei Wang
- State Key Laboratory of Marine Food Processing and Safety Control, College of Food Science and Engineering, Ocean University of China, Qingdao 266404, China; Qingdao Key Laboratory of Food Biotechnology, Qingdao 266404, China; Key Laboratory of Biological Processing of Aquatic Products, China National Light Industry, Qingdao 266404, China
| | - Jiayuan Liu
- State Key Laboratory of Marine Food Processing and Safety Control, College of Food Science and Engineering, Ocean University of China, Qingdao 266404, China
| | - Huiwen Xu
- State Key Laboratory of Marine Food Processing and Safety Control, College of Food Science and Engineering, Ocean University of China, Qingdao 266404, China
| | - Yan Zhang
- State Key Laboratory of Marine Food Processing and Safety Control, College of Food Science and Engineering, Ocean University of China, Qingdao 266404, China
| | - Xiangzhao Mao
- State Key Laboratory of Marine Food Processing and Safety Control, College of Food Science and Engineering, Ocean University of China, Qingdao 266404, China; Laboratory for Marine Drugs and Bioproducts of Qingdao National Laboratory for Marine Science and Technology, Qingdao 266237, China; Qingdao Key Laboratory of Food Biotechnology, Qingdao 266404, China; Key Laboratory of Biological Processing of Aquatic Products, China National Light Industry, Qingdao 266404, China
| | - Wen-Can Huang
- State Key Laboratory of Marine Food Processing and Safety Control, College of Food Science and Engineering, Ocean University of China, Qingdao 266404, China; Qingdao Key Laboratory of Food Biotechnology, Qingdao 266404, China; Key Laboratory of Biological Processing of Aquatic Products, China National Light Industry, Qingdao 266404, China.
| |
Collapse
|
11
|
Boccia AC, Neagu M, Pulvirenti A. Bio-Based Aerogels for the Removal of Heavy Metal Ions and Oils from Water: Novel Solutions for Environmental Remediation. Gels 2023; 10:32. [PMID: 38247754 PMCID: PMC10815902 DOI: 10.3390/gels10010032] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/24/2023] [Revised: 12/18/2023] [Accepted: 12/22/2023] [Indexed: 01/23/2024] Open
Abstract
Contamination of the aqueous environment caused by the presence of heavy metal ions and oils is a growing concern that must be addressed to reduce their detrimental impact on living organisms and safeguard the environment. Recent efficient and environmentally friendly remediation methods for the treatment of water are based on third-generation bioaerogels as emerging applications for the removal of heavy metal ions and oils from aqueous systems. The peculiarities of these materials are various, considering their high specific surface area and low density, together with a highly porous three-dimensional structure and tunable surface chemistry. This review illustrates the recent progress in aerogels developed from cellulose and chitosan as emerging materials in water treatment. The potential of aerogel-based adsorbents for wastewater treatment is reported in terms of adsorption efficacy and reusability. Despite various gaps affecting the manufacturing and production costs of aerogels that actually limit their successful implementation in the market, the research progress suggests that bio-based aerogels are ready to be used in water-treatment applications in the near future.
Collapse
Affiliation(s)
- Antonella Caterina Boccia
- National Research Council, (CNR), Istituto di Scienze e Tecnologie Chimiche-SCITEC “G. Natta”, Via A. Corti, 12, 20133 Milano, Italy;
| | - Monica Neagu
- Victor Babes National Institute of Pathology, 050096 Bucharest, Romania;
| | - Alfio Pulvirenti
- National Research Council, (CNR), Istituto di Scienze e Tecnologie Chimiche-SCITEC “G. Natta”, Via A. Corti, 12, 20133 Milano, Italy;
| |
Collapse
|
12
|
Nocca G, Arcovito A, Elkasabgy NA, Basha M, Giacon N, Mazzinelli E, Abdel-Maksoud MS, Kamel R. Cellulosic Textiles-An Appealing Trend for Different Pharmaceutical Applications. Pharmaceutics 2023; 15:2738. [PMID: 38140079 PMCID: PMC10747844 DOI: 10.3390/pharmaceutics15122738] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/06/2023] [Revised: 11/28/2023] [Accepted: 12/04/2023] [Indexed: 12/24/2023] Open
Abstract
Cellulose, the most abundant biopolymer in nature, is derived from various sources. The production of pharmaceutical textiles based on cellulose represents a growing sector. In medicated textiles, textile and pharmaceutical sciences are integrated to develop new healthcare approaches aiming to improve patient compliance. Through the possibility of cellulose functionalization, pharmaceutical textiles can broaden the applications of cellulose in the biomedical field. This narrative review aims to illustrate both the methods of extraction and preparation of cellulose fibers, with a particular focus on nanocellulose, and diverse pharmaceutical applications like tissue restoration and antimicrobial, antiviral, and wound healing applications. Additionally, the merging between fabricated cellulosic textiles with drugs, metal nanoparticles, and plant-derived and synthetic materials are also illustrated. Moreover, new emerging technologies and the use of smart medicated textiles (3D and 4D cellulosic textiles) are not far from those within the review scope. In each section, the review outlines some of the limitations in the use of cellulose textiles, indicating scientific research that provides significant contributions to overcome them. This review also points out the faced challenges and possible solutions in a trial to present an overview on all issues related to the use of cellulose for the production of pharmaceutical textiles.
Collapse
Affiliation(s)
- Giuseppina Nocca
- Dipartimento di Scienze Biotecnologiche di Base, Cliniche Intensivologiche e Perioperatorie, Università Cattolica del Sacro Cuore, Largo Francesco Vito 1, 00168 Rome, Italy; (G.N.); (A.A.); (E.M.)
- Fondazione Policlinico Universitario “A. Gemelli”, IRCCS, Largo Agostino Gemelli 8, 00168 Rome, Italy
| | - Alessandro Arcovito
- Dipartimento di Scienze Biotecnologiche di Base, Cliniche Intensivologiche e Perioperatorie, Università Cattolica del Sacro Cuore, Largo Francesco Vito 1, 00168 Rome, Italy; (G.N.); (A.A.); (E.M.)
- Fondazione Policlinico Universitario “A. Gemelli”, IRCCS, Largo Agostino Gemelli 8, 00168 Rome, Italy
| | - Nermeen A. Elkasabgy
- Department of Pharmaceutics and Industrial Pharmacy, Faculty of Pharmacy, Cairo University, Kasr El-Aini Street, Cairo 11562, Egypt
| | - Mona Basha
- Pharmaceutical Technology Department, National Research Centre, Cairo 12622, Egypt (R.K.)
| | - Noah Giacon
- Dipartimento di Scienze Biotecnologiche di Base, Cliniche Intensivologiche e Perioperatorie, Università Cattolica del Sacro Cuore, Largo Francesco Vito 1, 00168 Rome, Italy; (G.N.); (A.A.); (E.M.)
| | - Elena Mazzinelli
- Dipartimento di Scienze Biotecnologiche di Base, Cliniche Intensivologiche e Perioperatorie, Università Cattolica del Sacro Cuore, Largo Francesco Vito 1, 00168 Rome, Italy; (G.N.); (A.A.); (E.M.)
| | | | - Rabab Kamel
- Pharmaceutical Technology Department, National Research Centre, Cairo 12622, Egypt (R.K.)
| |
Collapse
|
13
|
List R, Gonzalez-Lopez L, Ashfaq A, Zaouak A, Driscoll M, Al-Sheikhly M. On the Mechanism of the Ionizing Radiation-Induced Degradation and Recycling of Cellulose. Polymers (Basel) 2023; 15:4483. [PMID: 38231912 PMCID: PMC10708459 DOI: 10.3390/polym15234483] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/18/2023] [Revised: 10/13/2023] [Accepted: 10/23/2023] [Indexed: 01/19/2024] Open
Abstract
The use of ionizing radiation offers a boundless range of applications for polymer scientists, from inducing crosslinking and/or degradation to grafting a wide variety of monomers onto polymeric chains. This review in particular aims to introduce the field of ionizing radiation as it relates to the degradation and recycling of cellulose and its derivatives. The review discusses the main mechanisms of the radiolytic sessions of the cellulose molecules in the presence and absence of water. During the radiolysis of cellulose, in the absence of water, the primary and secondary electrons from the electron beam, and the photoelectric, Compton effect electrons from gamma radiolysis attack the glycosidic bonds (C-O-C) on the backbone of the cellulose chains. This radiation-induced session results in the formation of alkoxyl radicals and C-centered radicals. In the presence of water, the radiolytically produced hydroxyl radicals (●OH) will abstract hydrogen atoms, leading to the formation of C-centered radicals, which undergo various reactions leading to the backbone session of the cellulose. Based on the structures of the radiolytically produced free radicals in presence and absence of water, covalent grafting of vinyl monomers on the cellulose backbone is inconceivable.
Collapse
Affiliation(s)
- Richard List
- Department of Chemical Engineering, State University of New York College of Environmental Science and Forestry, Syracuse, NY 13210, USA
- UV/EB Technology Center, State University of New York College of Environmental Science and Forestry, Syracuse, NY 13210, USA
| | - Lorelis Gonzalez-Lopez
- Department of Materials Science and Engineering, University of Maryland, College Park, MD 20742, USA
| | - Aiysha Ashfaq
- Department of Chemistry and Biochemistry, University of Maryland, College Park, MD 20742, USA
| | - Amira Zaouak
- Research Laboratory on Energy and Matter for Nuclear Science Development, National Center for Nuclear Science and Technology, Sidi-Thabet 2020, Tunisia;
| | - Mark Driscoll
- UV/EB Technology Center, State University of New York College of Environmental Science and Forestry, Syracuse, NY 13210, USA
- Department of Chemistry, State University of New York College of Environmental Science and Forestry, Syracuse, NY 13210, USA
| | - Mohamad Al-Sheikhly
- Department of Materials Science and Engineering, University of Maryland, College Park, MD 20742, USA
| |
Collapse
|
14
|
Lee J, Lee S, Lim JW, Byun I, Jang KJ, Kim JW, Chung JH, Kim J, Seonwoo H. Development of Plum Seed-Derived Carboxymethylcellulose Bioink for 3D Bioprinting. Polymers (Basel) 2023; 15:4473. [PMID: 38231895 PMCID: PMC10708124 DOI: 10.3390/polym15234473] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/16/2023] [Revised: 11/16/2023] [Accepted: 11/16/2023] [Indexed: 01/19/2024] Open
Abstract
Three-dimensional bioprinting represents an innovative platform for fabricating intricate, three-dimensional (3D) tissue structures that closely resemble natural tissues. The development of hybrid bioinks is an actionable strategy for integrating desirable characteristics of components. In this study, cellulose recovered from plum seed was processed to synthesize carboxymethyl cellulose (CMC) for 3D bioprinting. The plum seeds were initially subjected to α-cellulose recovery, followed by the synthesis and characterization of plum seed-derived carboxymethyl cellulose (PCMC). Then, hybrid bioinks composed of PCMC and sodium alginate were fabricated, and their suitability for extrusion-based bioprinting was explored. The PCMC bioinks exhibit a remarkable shear-thinning property, enabling effortless extrusion through the nozzle and maintaining excellent initial shape fidelity. This bioink was then used to print muscle-mimetic 3D structures containing C2C12 cells. Subsequently, the cytotoxicity of PCMC was evaluated at different concentrations to determine the maximum acceptable concentration. As a result, cytotoxicity was not observed in hydrogels containing a suitable concentration of PCMC. Cell viability was also evaluated after printing PCMC-containing bioinks, and it was observed that the bioprinting process caused minimal damage to the cells. This suggests that PCMC/alginate hybrid bioink can be used as a very attractive material for bioprinting applications.
Collapse
Affiliation(s)
- Juo Lee
- Department of Animal Science & Technology, College of Life Science and Natural Resources, Sunchon National University, Suncheon 57922, Republic of Korea;
- Interdisciplinary Program in IT-Bio Convergence System, Sunchon National University, Suncheon 57922, Republic of Korea
| | - Sungmin Lee
- Interdisciplinary Program in IT-Bio Convergence System, Sunchon National University, Suncheon 57922, Republic of Korea
- Department of Human Harmonized Robotics, College of Engineering, Sunchon National University, Suncheon 57922, Republic of Korea
| | - Jae Woon Lim
- Department of Biosystems Engineering, College of Agriculture and Life Sciences, Seoul National University, Seoul 08826, Republic of Korea
| | - Iksong Byun
- Interdisciplinary Program in IT-Bio Convergence System, Sunchon National University, Suncheon 57922, Republic of Korea
- Department of Agricultural Machinery Engineering, College of Life Science and Natural Resources, Sunchon National University, Suncheon 57922, Republic of Korea
| | - Kyoung-Je Jang
- Department of Bio-Systems Engineering, Institute of Smart Farm, Gyeongsang National University, Jinju 52828, Republic of Korea
- Institute of Agriculture & Life Science, Gyeongsang National University, Jinju 52828, Republic of Korea
| | - Jin-Woo Kim
- Department of Biological & Agricultural Engineering, University of Arkansas, Fayetteville, AR 72701, USA
- Materials Science & Engineering Program, University of Arkansas, Fayetteville, AR 72701, USA
| | | | - Jungsil Kim
- Department of Bio-Industrial Machinery Engineering, College of Agriculture and Life Sciences, Kyungpook National University, Daegu 41566, Republic of Korea
| | - Hoon Seonwoo
- Interdisciplinary Program in IT-Bio Convergence System, Sunchon National University, Suncheon 57922, Republic of Korea
- Department of Convergent Biosystems Engineering, College of Life Science and Natural Resources, Sunchon National University, Suncheon 57922, Republic of Korea
| |
Collapse
|
15
|
Choudhari M, Damle S, Saha RN, Dubey SK, Singhvi G. Emerging Applications of Hydroxypropyl Methylcellulose Acetate Succinate: Different Aspects in Drug Delivery and Its Commercial Potential. AAPS PharmSciTech 2023; 24:188. [PMID: 37715004 DOI: 10.1208/s12249-023-02645-1] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/23/2023] [Accepted: 08/23/2023] [Indexed: 09/17/2023] Open
Abstract
Hydroxypropyl methylcellulose acetate succinate (HPMCAS) has multi-disciplinary applications spanning across the development of drug delivery systems, in 3D printing, and in tissue engineering, etc. HPMCAS helps in maintaining the drug in a super-saturated condition by inhibiting its precipitation, thereby increasing the rate and extent of dissolution in the aqueous media. HPMCAS has several distinctive characteristics, such as being amphiphilic in nature, having an ionization pH, and a succinyl and acetyl substitution ratio, all of which are beneficial while developing formulations. This review provides insights regarding the various types of formulations being developed using HPMCAS, including amorphous solid dispersion (ASD), amorphous nanoparticles, dry coating, and 3D printing, along with their applicability in drug delivery and biomedical fields. Furthermore, HPMCAS, compared with other carbohydrate polymers, shows several benefits in drug delivery, including proficiency in imparting stable ASD with a high dissolution rate, being easily processable, and enhancing bioavailability. The various commercially available formulations, regulatory considerations, and key patents containing the HPMCAS have been discussed in this review.
Collapse
Affiliation(s)
- Manisha Choudhari
- Department of Pharmacy, Birla Institute of Technology and Science, Pilani, Vidya Vihar, Pilani Campus, Rajasthan, 333031, India
| | - Shantanu Damle
- Colorcon Asia Pvt. Ltd. Verna Industrial Estate, Verna, Goa, 403722, India
| | - Ranendra Narayan Saha
- Department of Pharmacy, Birla Institute of Technology and Science, Pilani, Vidya Vihar, Pilani Campus, Rajasthan, 333031, India
| | - Sunil Kumar Dubey
- Department of Pharmacy, Birla Institute of Technology and Science, Pilani, Vidya Vihar, Pilani Campus, Rajasthan, 333031, India.
- R&D Healthcare Emami Ltd., Belgharia, Kolkata, 700056, India.
| | - Gautam Singhvi
- Department of Pharmacy, Birla Institute of Technology and Science, Pilani, Vidya Vihar, Pilani Campus, Rajasthan, 333031, India.
| |
Collapse
|
16
|
Jayan SS, Jayan JS, Saritha A. A review on recent advances towards sustainable development of bio-inspired agri-waste based cellulose aerogels. Int J Biol Macromol 2023; 248:125928. [PMID: 37481183 DOI: 10.1016/j.ijbiomac.2023.125928] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/18/2023] [Revised: 06/25/2023] [Accepted: 07/19/2023] [Indexed: 07/24/2023]
Abstract
Cellulose aerogel (CA) is considered to be the most promising material due to its extraordinary properties like unique microstructure, porosity, large specific surface area, biodegradability, renewable nature and lightweight. Cellulosic aerogels are thus found to have potential applications in different fields especially in water purification and biomedical field. Agricultural waste based cellulose aerogels are recently getting wider attention owing to its sustainability. The synthesis methods of agri-waste based cellulose aerogels, its properties and application in different fields especially in the field of water purification are detailed in a comprehensive manner. This review tries to bring light into the commercialization of value-added products from sustainable, cheap agricultural waste material and tries to motivate young researchers.
Collapse
Affiliation(s)
- Sajitha S Jayan
- Department of Chemistry, Bishop Moore College, Mavelikkara, Kerala, India
| | - Jitha S Jayan
- Department of Chemistry, Amrita Vishwa Vidyapeetham, Amritapuri, Kollam, Kerala, India; Department of Chemistry, National Institute of Technology, Calicut, Kerala, India.
| | - Appukuttan Saritha
- Department of Chemistry, Amrita Vishwa Vidyapeetham, Amritapuri, Kollam, Kerala, India.
| |
Collapse
|
17
|
Rosales TKO, da Silva FFA, Bernardes ES, Paulo Fabi J. Plant-derived polyphenolic compounds: nanodelivery through polysaccharide-based systems to improve the biological properties. Crit Rev Food Sci Nutr 2023:1-25. [PMID: 37585699 DOI: 10.1080/10408398.2023.2245038] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 08/18/2023]
Abstract
Plant-derived polyphenols are naturally occurring compounds widely distributed in plants. They have received greater attention in the food and pharmaceutical industries due to their potential health benefits, reducing the risk of some chronic diseases due to their antioxidant, anti-inflammatory, anticancer, cardioprotective, and neuro-action properties. Polyphenolic compounds orally administered can be used as adjuvants in several treatments but with restricted uses due to chemical instability. The review discusses the different structural compositions of polyphenols and their influence on chemical stability. Despite the potential and wide applications, there is a need to improve the delivery of polyphenolics to target the human intestine without massive chemical modifications. Oral administration of polyphenols is unfeasible due to instability, low bioaccessibility, and limited bioavailability. Nano-delivery systems based on polysaccharides (starch, pectin, chitosan, and cellulose) have been identified as a viable option for oral ingestion, potentiate biological effects, and direct-controlled delivery in specific tissues. The time and dose can be individualized for specific diseases, such as intestinal cancer. This review will address the mechanisms by which polysaccharides-based nanostructured systems can protect against degradation and enhance intestinal permeation, oral bioavailability, and the potential application of polysaccharides as nanocarriers for the controlled and targeted delivery of polyphenolic compounds.
Collapse
Affiliation(s)
- Thiécla Katiane Osvaldt Rosales
- Department of Food Science and Experimental Nutrition, School of Pharmaceutical Sciences, University of São Paulo, São Paulo, SP, Brazil
- Instituto de Pesquisa Energéticas e Nucleares - IPEN, São Paulo, SP, Brazil
| | | | | | - João Paulo Fabi
- Department of Food Science and Experimental Nutrition, School of Pharmaceutical Sciences, University of São Paulo, São Paulo, SP, Brazil
- Food Research Center (FoRC), CEPID-FAPESP (Research, Innovation and Dissemination Centers, São Paulo Research Foundation), São Paulo, SP, Brazil
- Food and Nutrition Research Center (NAPAN), University of São Paulo, São Paulo, SP, Brazil
| |
Collapse
|
18
|
Altuntaş E, Özkan B, Güngör S, Özsoy Y. Biopolymer-Based Nanogel Approach in Drug Delivery: Basic Concept and Current Developments. Pharmaceutics 2023; 15:1644. [PMID: 37376092 DOI: 10.3390/pharmaceutics15061644] [Citation(s) in RCA: 10] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/27/2023] [Revised: 05/29/2023] [Accepted: 05/30/2023] [Indexed: 06/29/2023] Open
Abstract
Due to their increased surface area, extent of swelling and active substance-loading capacity and flexibility, nanogels made from natural and synthetic polymers have gained significant interest in scientific and industrial areas. In particular, the customized design and implementation of nontoxic, biocompatible, and biodegradable micro/nano carriers makes their usage very feasible for a range of biomedical applications, including drug delivery, tissue engineering, and bioimaging. The design and application methodologies of nanogels are outlined in this review. Additionally, the most recent advancements in nanogel biomedical applications are discussed, with particular emphasis on applications for the delivery of drugs and biomolecules.
Collapse
Affiliation(s)
- Ebru Altuntaş
- Faculty of Pharmacy, Department of Pharmaceutical Technology, Istanbul University, 34116 Istanbul, Türkiye
| | - Burcu Özkan
- Graduate School of Natural and Applied Science, Yildiz Technical University, 34220 Istanbul, Türkiye
| | - Sevgi Güngör
- Faculty of Pharmacy, Department of Pharmaceutical Technology, Istanbul University, 34116 Istanbul, Türkiye
| | - Yıldız Özsoy
- Faculty of Pharmacy, Department of Pharmaceutical Technology, Istanbul University, 34116 Istanbul, Türkiye
| |
Collapse
|
19
|
Caracci E, Vega-Herrera A, Dachs J, Berrojalbiz N, Buonanno G, Abad E, Llorca M, Moreno T, Farré M. Micro(nano)plastics in the atmosphere of the Atlantic Ocean. JOURNAL OF HAZARDOUS MATERIALS 2023; 450:131036. [PMID: 36857820 DOI: 10.1016/j.jhazmat.2023.131036] [Citation(s) in RCA: 13] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/16/2022] [Revised: 02/16/2023] [Accepted: 02/17/2023] [Indexed: 06/18/2023]
Abstract
The occurrence, long-range atmospheric transport and deposition of micro and nano plastics (MNPLs) remains un-quantified for the oceanic atmosphereopen ocean. Here we show the characterisation of MNPLs and the aerosol composition (PM10) in a north-south Atlantic transect from Vigo (Spain) to Punta Arenas (Chile). The analytical procedure to assess the composition of MNPLs consisted of a double suspect screening approach of the polymers and additives, the two constituents of plastics. Polymers were analysed by size exclusion chromatography coupled with high-resolution mass spectrometry using an atmospheric pressure photoionization source operated in positive and negative conditions (HPLC(SEC)-APPI(+/-)-HRMS). Plastic additives were screened with high-performance liquid chromatography coupled to high-resolution mass spectrometry using an electrospray ionisation source (HPLC-ESI(+/-)-HRMS). The most common polymers were polyethylene (PE), polypropylene (PP), polyisoprene (PI), and polystyrene (PS), with the highest polymer concentration being 51.7 ng·m-3 of PI. The air mass back trajectories showed the variable influence of oceanic and terrestrial air masses. These differences were reflected in the aerosol composition with different contributions of Saharan dust, sea spray aerosol, organic/elemental carbon, and MNPLs. Results showed that samples largely influenced by sea-spray and air masses originating from coastal South America and the north Atlantic subtropical gyre were more contaminated by MNPLs. Moreover, this information was complemented by the characterisation of the largest particles using scanning electron microscopy (SEM) and µ-Fourier Transform Infrared Spectroscopy (µ-FTIR). This work provides the first field evidence of the long-range transport of MNPLs in most of the Atlantic Ocean, as the result of dynamic coupling between the lower atmosphere and the surface ocean. Sea-spray formation arises as a key driver for the aerosolisation of MNPLs, and atmospheric transport followed by dry deposition may modulate the occurrence of MNPLs in large oceanic regions, issues that will require future research efforts.
Collapse
Affiliation(s)
- Elisa Caracci
- Department of Civil and Mechanical Engineering, University of Cassino and Southern Lazio, FR, Cassino, Italy
| | - Albert Vega-Herrera
- Institute of Environmental Assessment and Water Research (IDAEA-CSIC), C. Jordi Girona, 18-26, 08034 Barcelona, Spain
| | - Jordi Dachs
- Institute of Environmental Assessment and Water Research (IDAEA-CSIC), C. Jordi Girona, 18-26, 08034 Barcelona, Spain
| | - Naiara Berrojalbiz
- Institute of Environmental Assessment and Water Research (IDAEA-CSIC), C. Jordi Girona, 18-26, 08034 Barcelona, Spain
| | - Giorgio Buonanno
- Department of Civil and Mechanical Engineering, University of Cassino and Southern Lazio, FR, Cassino, Italy; International Laboratory for Air Quality and Health, Queensland University of Technology, Brisbane, Australia
| | - Esteban Abad
- Institute of Environmental Assessment and Water Research (IDAEA-CSIC), C. Jordi Girona, 18-26, 08034 Barcelona, Spain
| | - Marta Llorca
- Institute of Environmental Assessment and Water Research (IDAEA-CSIC), C. Jordi Girona, 18-26, 08034 Barcelona, Spain
| | - Teresa Moreno
- Institute of Environmental Assessment and Water Research (IDAEA-CSIC), C. Jordi Girona, 18-26, 08034 Barcelona, Spain.
| | - Marinella Farré
- Institute of Environmental Assessment and Water Research (IDAEA-CSIC), C. Jordi Girona, 18-26, 08034 Barcelona, Spain.
| |
Collapse
|
20
|
Vidakis N, Petousis M, Mountakis N, Papadakis V, Moutsopoulou A. Mechanical strength predictability of full factorial, Taguchi, and Box Behnken designs: Optimization of thermal settings and Cellulose Nanofibers content in PA12 for MEX AM. J Mech Behav Biomed Mater 2023; 142:105846. [PMID: 37084490 DOI: 10.1016/j.jmbbm.2023.105846] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/24/2023] [Revised: 04/03/2023] [Accepted: 04/08/2023] [Indexed: 04/23/2023]
Abstract
Optimization of reinforced nanocomposites for MEX 3D-printing remain strong industrial claims. Herein, the efficacy of three modeling methods, i.e., full factorial (FFD), Taguchi (TD), and Box-Behnken (BBD), on the performance of MEX 3D printed nanocomposites was investigated, aiming to reduce the experimental effort. Filaments of medical-grade Polyamide 12 (PA12) reinforced with Cellulose NanoFibers (CNF) were evolved. Besides the CNF loading, 3D printing settings such as Nozzle (NT) and Bed (BΤ) Temperatures were optimization goals aiming to maximize the mechanical response. Three parameters and three levels of FFD were compliant with the ASTM-D638 standard (27 runs, five repetitions). An L9 orthogonal TD and a 15 runs BBD were compiled. In FFD, wt.3%CNF, 270 °C NT, and 80 °C BΤ led to 24% higher tensile strength compared to pure PA12. TGA, RAMAN, and SEM analyses interpreted the reinforcement mechanisms. TD and BBD exhibited fair approximations, requiring 7.4% and 11.8% of the FFD experimental effort.
Collapse
Affiliation(s)
- Nectarios Vidakis
- Department of Mechanical Engineering, Hellenic Mediterranean University, Heraklion, 71410, Greece.
| | - Markos Petousis
- Department of Mechanical Engineering, Hellenic Mediterranean University, Heraklion, 71410, Greece.
| | - Nikolaos Mountakis
- Department of Mechanical Engineering, Hellenic Mediterranean University, Heraklion, 71410, Greece.
| | - Vassilis Papadakis
- Institute of Electronic Structure and Laser, Foundation for Research and Technology-Hellas, N. Plastira 100, GR-70013, Heraklion, Greece.
| | - Amalia Moutsopoulou
- Department of Mechanical Engineering, Hellenic Mediterranean University, Heraklion, 71410, Greece.
| |
Collapse
|
21
|
Pourmadadi M, Rahmani E, Shamsabadipour A, Samadi A, Esmaeili J, Arshad R, Rahdar A, Tavangarian F, Pandey S. Novel Carboxymethyl cellulose based nanocomposite: A Promising Biomaterial for Biomedical Applications. Process Biochem 2023. [DOI: 10.1016/j.procbio.2023.03.033] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 04/05/2023]
|
22
|
Šedbarė R, Janulis V, Ramanauskiene K. Formulation and Biopharmaceutical Evaluation of Capsules Containing Freeze-Dried Cranberry Fruit Powder. PLANTS (BASEL, SWITZERLAND) 2023; 12:1397. [PMID: 36987086 PMCID: PMC10057423 DOI: 10.3390/plants12061397] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 02/14/2023] [Revised: 03/19/2023] [Accepted: 03/21/2023] [Indexed: 06/19/2023]
Abstract
Cranberry fruits are an important source of anthocyanins and anthocyanidins. The aim of the present study was to investigate the effect of excipients on the solubility of cranberry anthocyanins and their dissolution kinetics as well as on the disintegration time of the capsules. Selected excipients (sodium carboxymethyl cellulose, beta-cyclodextrin and chitosan) were found to affect the solubility and release kinetics of anthocyanins in freeze-dried cranberry powder. Capsule formulations N1-N9 had a disintegration time of less than 10 min, and capsule formulation N10 containing 0.200 g of freeze-dried cranberry powder, 0.100 g of Prosolv (combination of microcrystalline cellulose and colloidal silicon dioxide), and 0.100 g of chitosan had a capsule disintegration time of over 30 min. The total amount of anthocyanins released into the acceptor medium ranged from 1.26 ± 0.06 mg to 1.56 ± 0.03 mg. Capsule dissolution test data showed that the time to release into the acceptor medium was statistically significantly longer for the chitosan-containing capsule formulations compared to the control capsules (p < 0.05). Freeze-dried cranberry fruit powder is a potential source of anthocyanin-rich dietary supplements, and the choice of excipient chitosan could be a suitable solution in capsule formulations providing greater anthocyanin stability and modified release in the gastrointestinal tract.
Collapse
Affiliation(s)
- Rima Šedbarė
- Department of Pharmacognosy, Faculty of Pharmacy, Lithuanian University of Health Sciences, 50162 Kaunas, Lithuania;
| | - Valdimaras Janulis
- Department of Pharmacognosy, Faculty of Pharmacy, Lithuanian University of Health Sciences, 50162 Kaunas, Lithuania;
| | - Kristina Ramanauskiene
- Department of Clinical Pharmacy, Faculty of Pharmacy, Lithuanian University of Health Sciences, 50162 Kaunas, Lithuania;
| |
Collapse
|
23
|
Janmohammadi M, Nazemi Z, Salehi AOM, Seyfoori A, John JV, Nourbakhsh MS, Akbari M. Cellulose-based composite scaffolds for bone tissue engineering and localized drug delivery. Bioact Mater 2023; 20:137-163. [PMID: 35663339 PMCID: PMC9142858 DOI: 10.1016/j.bioactmat.2022.05.018] [Citation(s) in RCA: 71] [Impact Index Per Article: 71.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/16/2022] [Revised: 04/27/2022] [Accepted: 05/13/2022] [Indexed: 12/12/2022] Open
Abstract
Natural bone constitutes a complex and organized structure of organic and inorganic components with limited ability to regenerate and restore injured tissues, especially in large bone defects. To improve the reconstruction of the damaged bones, tissue engineering has been introduced as a promising alternative approach to the conventional therapeutic methods including surgical interventions using allograft and autograft implants. Bioengineered composite scaffolds consisting of multifunctional biomaterials in combination with the cells and bioactive therapeutic agents have great promise for bone repair and regeneration. Cellulose and its derivatives are renewable and biodegradable natural polymers that have shown promising potential in bone tissue engineering applications. Cellulose-based scaffolds possess numerous advantages attributed to their excellent properties of non-toxicity, biocompatibility, biodegradability, availability through renewable resources, and the low cost of preparation and processing. Furthermore, cellulose and its derivatives have been extensively used for delivering growth factors and antibiotics directly to the site of the impaired bone tissue to promote tissue repair. This review focuses on the various classifications of cellulose-based composite scaffolds utilized in localized bone drug delivery systems and bone regeneration, including cellulose-organic composites, cellulose-inorganic composites, cellulose-organic/inorganic composites. We will also highlight the physicochemical, mechanical, and biological properties of the different cellulose-based scaffolds for bone tissue engineering applications.
Collapse
Affiliation(s)
- Mahsa Janmohammadi
- Faculty of New Sciences and Technologies, Semnan University, Semnan, P.O.Box: 19111-35131, Iran
| | - Zahra Nazemi
- Faculty of New Sciences and Technologies, Semnan University, Semnan, P.O.Box: 19111-35131, Iran
| | | | - Amir Seyfoori
- Laboratory for Innovations in Micro Engineering (LiME), Department of Mechanical Engineering, University of Victoria, Victoria, BC, V8P 5C2, Canada
| | - Johnson V. John
- Terasaki Institute for Biomedical Innovations, Los Angeles, CA, 90050, USA
| | - Mohammad Sadegh Nourbakhsh
- Faculty of Materials and Metallurgical Engineering, Semnan University, Semnan, P.O.Box: 19111-35131, Iran
| | - Mohsen Akbari
- Laboratory for Innovations in Micro Engineering (LiME), Department of Mechanical Engineering, University of Victoria, Victoria, BC, V8P 5C2, Canada
- Terasaki Institute for Biomedical Innovations, Los Angeles, CA, 90050, USA
- Biotechnology Center, Silesian University of Technology, Akademicka 2A, 44-100, Gliwice, Poland
| |
Collapse
|
24
|
Wallenwein CM, Weigel V, Hofhaus G, Dhakal N, Schatton W, Gelperina S, Groeber-Becker FK, Dressman J, Wacker MG. Pharmaceutical Development of Nanostructured Vesicular Hydrogel Formulations of Rifampicin for Wound Healing. Int J Mol Sci 2022; 23:16207. [PMID: 36555855 PMCID: PMC9788359 DOI: 10.3390/ijms232416207] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/20/2022] [Revised: 12/13/2022] [Accepted: 12/14/2022] [Indexed: 12/24/2022] Open
Abstract
Chronic wounds exhibit elevated levels of inflammatory cytokines, resulting in the release of proteolytic enzymes which delay wound-healing processes. In recent years, rifampicin has gained significant attention in the treatment of chronic wounds due to an interesting combination of antibacterial and anti-inflammatory effects. Unfortunately, rifampicin is sensitive to hydrolysis and oxidation. As a result, no topical drug product for wound-healing applications has been approved. To address this medical need two nanostructured hydrogel formulations of rifampicin were developed. The liposomal vesicles were embedded into hydroxypropyl methylcellulose (HPMC) gel or a combination of hyaluronic acid and marine collagen. To protect rifampicin from degradation in aqueous environments, a freeze-drying method was developed. Before freeze-drying, two well-defined hydrogel preparations were obtained. After freeze-drying, the visual appearance, chemical stability, residual moisture content, and redispersion time of both preparations were within acceptable limits. However, the morphological characterization revealed an increase in the vesicle size for collagen-hyaluronic acid hydrogel. This was confirmed by subsequent release studies. Interactions of marine collagen with phosphatidylcholine were held responsible for this effect. The HPMC hydrogel formulation remained stable over 6 months of storage. Moving forward, this product fulfills all criteria to be evaluated in preclinical and clinical studies.
Collapse
Affiliation(s)
- Chantal M. Wallenwein
- Fraunhofer Institute for Translational Medicine and Pharmacology ITMP, Theodor-Stern-Kai 7, 60596 Frankfurt am Main, Germany
| | - Verena Weigel
- Translational Center for Regenerative Therapies, Fraunhofer Institute for Silicate Research ISC, Neunerplatz 2, 97082 Würzburg, Germany
| | - Götz Hofhaus
- Cryo Electron Microscopy, CellNetworks, BioQuant, Universitätsklinikum Heidelberg, 69120 Heidelberg, Germany
| | - Namrata Dhakal
- Department of Pharmacy, Faculty of Science, National University of Singapore, 4 Science Drive 2, Singapore 117544, Singapore
| | | | - Svetlana Gelperina
- Faculty of Chemical and Pharmaceutical Technologies and Biomedical Drugs, D. Mendeleev University of Chemical Technology of Russia, Miusskaya pl. 9, 125047 Moscow, Russia
| | - Florian K. Groeber-Becker
- Translational Center for Regenerative Therapies, Fraunhofer Institute for Silicate Research ISC, Neunerplatz 2, 97082 Würzburg, Germany
| | - Jennifer Dressman
- Fraunhofer Institute for Translational Medicine and Pharmacology ITMP, Theodor-Stern-Kai 7, 60596 Frankfurt am Main, Germany
| | - Matthias G. Wacker
- Department of Pharmacy, Faculty of Science, National University of Singapore, 4 Science Drive 2, Singapore 117544, Singapore
| |
Collapse
|
25
|
Gaber DA, Alburaykan AI, Alruthea LM, Aldohan NS, Alharbi RF, Aljohani AR, Albilaihi HM, Adogim SS. Development, in vitro Evaluation, and in vivo Study of Adhesive Buccal Films for the Treatment of Diabetic Pediatrics via Trans Mucosal Delivery of Gliclazide. Drug Des Devel Ther 2022; 16:4235-4250. [PMID: 36536629 PMCID: PMC9759005 DOI: 10.2147/dddt.s394523] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/31/2022] [Accepted: 12/02/2022] [Indexed: 11/26/2023] Open
Abstract
OBJECTIVE Development and evaluation of bucco-adhesive films of Gliclazide for pediatric use. METHODS Sixteen films were formulated using a different combination of Gelatin, Hydroxy propyl methyl cellulose (HPMC), polyvinyl alcohol, Hydroxy propyl cellulose (HPC), chitosan, polyethylene glycol, sodium alginate, and carbopol. Compatibility study for drug and polymers was conducted using differential scanning calorimetry method and Fourier transform infrared spectroscopy. All films were examined for drug content, weight variation, thickness, swelling index, muco-adhesion and folding endurance. In vitro drug release has been completed for two hours. Stability studies were conducted at 4°C, 25°C, and 40°C for selected films. The optimized formulation based on in vitro data was selected for a bioavailability study in rabbits. RESULTS The selected film formula (carbopol 2%, HPMC 2%) did not demonstrate interactions between the drug and polymers, while it showed accepted content, muco-adhesion, and mechanical properties. The in vitro release study showed rapid and complete release of drug from films. Stability studies confirmed accepted stability of the selected film at 4°C and 25°C, but the film get hard with few particles at 40°C. The bioavailability studies conducted showed that there was 2.1 fold increase in the AUC0-24 of selected film compared with oral tablets. CONCLUSION Bucco adhesive films of Gliclazide is a promising dosage form for the treatment of diabetes in children.
Collapse
Affiliation(s)
- Dalia A Gaber
- Department of Quality Control & Quality Assurance, Holding Company for Biological Products and Vaccines, Cairo, Egypt
- Department of Pharmaceutics, College of Pharmacy, AL-Qassim University, Al-Qassim, Kingdom of Saudi Arabia
| | - Abeer I Alburaykan
- College of Pharmacy, Al- Qassim University, Al-Qassim, Kingdom of Saudi Arabia
| | - Lama M Alruthea
- College of Pharmacy, Al- Qassim University, Al-Qassim, Kingdom of Saudi Arabia
| | - Njoud S Aldohan
- College of Pharmacy, Al- Qassim University, Al-Qassim, Kingdom of Saudi Arabia
| | - Raneem F Alharbi
- College of Pharmacy, Al- Qassim University, Al-Qassim, Kingdom of Saudi Arabia
| | - Alhanoof R Aljohani
- College of Pharmacy, Al- Qassim University, Al-Qassim, Kingdom of Saudi Arabia
| | - Helah M Albilaihi
- College of Pharmacy, Al- Qassim University, Al-Qassim, Kingdom of Saudi Arabia
| | - Somaiah S Adogim
- College of Pharmacy, Al- Qassim University, Al-Qassim, Kingdom of Saudi Arabia
| |
Collapse
|
26
|
Indrakumar J, Sankar S, Madhyastha H, Muthukaliannan GK. Progressive Application of Marine Biomaterials in Targeted Cancer Nanotherapeutics. Curr Pharm Des 2022; 28:3337-3350. [PMID: 35466870 DOI: 10.2174/1381612828666220422091611] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/12/2021] [Revised: 12/15/2021] [Accepted: 01/04/2022] [Indexed: 01/28/2023]
Abstract
The marine microenvironment harbors many unique species of organisms that produce a plethora of compounds that help mankind cure a wide range of diseases. The diversity of products from the ocean bed serves as potentially healing materials and inert vehicles carrying the drug of interest to the target site. Several composites still lay undiscovered under the blue canopy, which can provide treatment for untreated diseases that keep haunting the earth periodically. Cancer is one such disease that has been of interest to several eminent scientists worldwide due to the heterogenic complexity involved in the disease's pathophysiology. Due to extensive globalization and environmental changes, cancer has become a lifestyle disease continuously increasing exponentially in the current decade. This ailment requires a definite remedy that treats by causing minimal damage to the body's normal cells. The application of nanotechnology in medicine has opened up new avenues of research in targeted therapeutics due to their highly malleable characteristics. Marine waters contain an immense ionic environment that succors the production of distinct nanomaterials with exceptional character, yielding highly flexible molecules to modify, thus facilitating the engineering of targeted biomolecules. This review provides a short insight into an array of marine biomolecules that can be probed into cancer nanotherapeutics sparing healthy cells.
Collapse
Affiliation(s)
- Janani Indrakumar
- School of Biosciences and Technology, Vellore Institute of Technology, Vellore 632014, Tamil Nadu, India
| | - Srivarshini Sankar
- School of Biosciences and Technology, Vellore Institute of Technology, Vellore 632014, Tamil Nadu, India
| | - Harishkumar Madhyastha
- Department of Medical Sciences, Division of Cardio-Vascular Physiology, Faculty of Medicine, University of Miyazaki, Miyazaki, Japan
| | | |
Collapse
|
27
|
Meir I, Alfassi G, Arazi Y, Rein DM, Fishman A, Cohen Y. Lipase Catalyzed Transesterification of Model Long-Chain Molecules in Double-Shell Cellulose-Coated Oil-in-Water Emulsion Particles as Microbioreactors. Int J Mol Sci 2022; 23:12122. [PMID: 36292979 PMCID: PMC9603428 DOI: 10.3390/ijms232012122] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/11/2022] [Revised: 10/07/2022] [Accepted: 10/08/2022] [Indexed: 11/16/2022] Open
Abstract
Lipase-catalyzed transesterification is prevalent in industrial production and is an effective alternative to chemical catalysis. However, due to lipases' unique structure, the reaction requires a biphasic system, which suffers from a low reaction efficiency caused by a limited interfacial area. The use of emulsion particles was found to be an effective way to increase the surface area and activity. This research focuses on cellulose as a natural surfactant for oil-in-water emulsions and evaluates the ability of lipase, introduced into the emulsion's aqueous phase, to integrate with the emulsion microparticles and catalyze the transesterification reaction of high molecular weight esters dissolved in the particles' cores. Cellulose-coated emulsion particles' morphology was investigated by light, fluorescence and cryogenic scanning electron microscopy, which reveal the complex emulsion structure. Lipase activity was evaluated by measuring the hydrolysis of emulsified p-nitrophenyl dodecanoate and by the transesterification of emulsified methyl laurate and oleyl alcohol dissolved in decane. Both experiments demonstrated that lipase introduced in the aqueous medium can penetrate the emulsion particles, localize at the inner oil core interface and perform effective catalysis. Furthermore, in this system, lipase successfully catalyzed a transesterification reaction rather than hydrolysis, despite the dominant presence of water.
Collapse
Affiliation(s)
- Itzhak Meir
- Department of Chemical Engineering, Technion—Israel Institute of Technology, Haifa 3200003, Israel
| | - Gilad Alfassi
- Department of Biotechnology Engineering, Braude College of Engineering, Karmiel 2161002, Israel
| | - Yael Arazi
- Department of Biotechnology and Food Engineering, Technion—Israel Institute of Technology, Haifa 3200003, Israel
| | - Dmitry M. Rein
- Department of Chemical Engineering, Technion—Israel Institute of Technology, Haifa 3200003, Israel
| | - Ayelet Fishman
- Department of Biotechnology and Food Engineering, Technion—Israel Institute of Technology, Haifa 3200003, Israel
| | - Yachin Cohen
- Department of Chemical Engineering, Technion—Israel Institute of Technology, Haifa 3200003, Israel
| |
Collapse
|
28
|
One-pot synthesis of PAMAM-grafted hyperbranched cellulose towards enhanced thermal stability and antibacterial activity. Process Biochem 2022. [DOI: 10.1016/j.procbio.2022.06.032] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
|
29
|
Duceac IA, Coseri S. Biopolymers and their derivatives: Key components of advanced biomedical technologies. Biotechnol Adv 2022; 61:108056. [DOI: 10.1016/j.biotechadv.2022.108056] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/11/2022] [Revised: 09/26/2022] [Accepted: 10/23/2022] [Indexed: 11/02/2022]
|
30
|
Mucoadhesive brinzolamide-loaded nanofibers for alternative glaucoma treatment. Eur J Pharm Biopharm 2022; 180:48-62. [PMID: 36167272 DOI: 10.1016/j.ejpb.2022.09.008] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/21/2022] [Revised: 09/05/2022] [Accepted: 09/11/2022] [Indexed: 11/21/2022]
Abstract
Despite the advances in the field of pharmaceutical materials and technology, topical administration remains a method of choice for the treatment of eye diseases such as glaucoma, with eye drops being a leading dosage form. Their main disadvantage is a very short drug residence time and thus poor drug bioavailability, leading to the necessity of continuous repeated dosing. Mucoadhesive electrospun nanofibers are promising candidates for overcoming these challenges, while still benefiting from topical ocular administration. As an alternative for eye drops, a nanofibrous drug delivery system (DDS) for the delivery of brinzolamide (BRZ), based on β-cyclodextrin (β-CD), hydroxypropyl cellulose (HPC) and polycaprolactone (PCL), was designed. The results showed β-CD/BRZ guest-host interactions, successful drug incorporation into the nanofibers, and the possibility of more accurate dosing in comparison with the control eye drops. Drug permeation through sheep corneas was almost linear in time, achieving therapeutic concentrations in the receptor medium, and mucoadhesion to sheep eye mucosa was relatively high in case of formulations with high HPC content. All formulations were biocompatible, their mechanical properties were sufficient to handle them without caution and UV irradiation was suitable to reduce bioburden of the fibers matrix, yet no antibacterial properties of BRZ were observed.
Collapse
|
31
|
Johari N, Khodaei A, Samadikuchaksaraei A, Reis RL, Kundu SC, Moroni L. Ancient fibrous biomaterials from silkworm protein fibroin and spider silk blends: Biomechanical patterns. Acta Biomater 2022; 153:38-67. [PMID: 36126911 DOI: 10.1016/j.actbio.2022.09.030] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/15/2022] [Revised: 08/26/2022] [Accepted: 09/13/2022] [Indexed: 11/15/2022]
Abstract
Silkworm silk protein fibroin and spider silk spidroin are known biocompatible and natural biodegradable polymers in biomedical applications. The presence of β-sheets in silk fibroin and spider spidroin conformation improves their mechanical properties. The strength and toughness of pure recombinant silkworm fibroin and spidroin are relatively low due to reduced molecular weight. Hence, blending is the foremost approach of recent studies to optimize silk fibroin and spidroin's mechanical properties. As summarised in the present review, numerous research investigations evaluate the blending of natural and synthetic polymers. The effects of blending silk fibroin and spidroin with natural and synthetic polymers on the mechanical properties are discussed in this review article. Indeed, combining natural and synthetic polymers with silk fibroin and spidroin changes their conformation and structure, fine-tuning the blends' mechanical properties. STATEMENT OF SIGNIFICANCE: Silkworm and spider silk proteins (silk fibroin and spidroin) are biocompatible and biodegradable natural polymers having different types of biomedical applications. Their mechanical and biological properties may be tuned through various strategies such as blending, conjugating and cross-linking. Blending is the most common method to modify fibroin and spidroin properties on demand, this review article aims to categorize and evaluate the effects of blending fibroin and spidroin with different natural and synthetic polymers. Increased polarity and hydrophilicity end to hydrogen bonding triggered conformational change in fibroin and spidroin blends. The effect of polarity and hydrophilicity of the blending compound is discussed and categorized to a combinatorial, synergistic and indirect impacts. This outlook guides us to choose the blending compounds mindfully as this mixing affects the biochemical and biophysical characteristics of the biomaterials.
Collapse
Affiliation(s)
- Narges Johari
- Materials Engineering group, Golpayegan College of Engineering, Isfahan University of Technology, Golpayegan, Iran.
| | - Azin Khodaei
- Department of Orthopedics, University Medical Center Utrecht, Utrecht, The Netherlands.
| | - Ali Samadikuchaksaraei
- Department of Medical Biotechnology, Faculty of Allied Medicine, Iran University of Medical Science, Tehran, Iran.
| | - Rui L Reis
- 3B's Research Group, I3Bs - Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark, Parque de Ciência e Tecnologia, 4805-017 Barco, Guimarães, Portugal.
| | - Subhas C Kundu
- 3B's Research Group, I3Bs - Research Institute on Biomaterials, Biodegradables and Biomimetics, University of Minho, Headquarters of the European Institute of Excellence on Tissue Engineering and Regenerative Medicine, AvePark, Parque de Ciência e Tecnologia, 4805-017 Barco, Guimarães, Portugal.
| | - Lorenzo Moroni
- Maastricht University, MERLN Institute for Technology Inspired Regenerative Medicine, Complex Tissue Regeneration Department, Maastricht, The Netherlands.
| |
Collapse
|
32
|
Pharmaceutical Coating and Its Different Approaches, a Review. Polymers (Basel) 2022; 14:polym14163318. [PMID: 36015575 PMCID: PMC9415771 DOI: 10.3390/polym14163318] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/21/2022] [Revised: 07/28/2022] [Accepted: 07/31/2022] [Indexed: 11/29/2022] Open
Abstract
Coating the solid dosage form, such as tablets, is considered common, but it is a critical process that provides different characteristics to tablets. It increases the value of solid dosage form, administered orally, and thus meets diverse clinical requirements. As tablet coating is a process driven by technology, it relies on advancements in coating techniques, equipment used for the coating process, evaluation of coated tablets, and coated material used. Although different techniques were employed for coating purposes, which may be based on the use of solvents or solvent-free, each of the methods used has its advantages and disadvantages, and the techniques need continued modification too. During the process of film coating, several inter-and intra-batch uniformity of coated material on the tablets is considered a critical point that ensures the worth of the final product, particularly for those drugs that contain an active medicament in the coating layer. Meanwhile, computational modeling and experimental evaluation were actively used to predict the impact of the operational parameters on the final product quality and optimize the variables in tablet coating. The efforts produced by computational modeling or experimental evaluation not only save cost in optimizing the coating process but also saves time. This review delivers a brief review on film coating in solid dosage form, which includes tablets, with a focus on the polymers and processes used in the coating. At the end, some pharmaceutical applications were also discussed.
Collapse
|
33
|
Contemporary nanocellulose-composites: A new paradigm for sensing applications. Carbohydr Polym 2022; 298:120052. [DOI: 10.1016/j.carbpol.2022.120052] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/08/2022] [Revised: 08/24/2022] [Accepted: 08/25/2022] [Indexed: 01/21/2023]
|
34
|
Aykaç K, Başaran E. Formulation and Characterization of Lacosamide-loaded Polymeric Microneedles. JOURNAL OF EXPLORATORY RESEARCH IN PHARMACOLOGY 2022; 7:61-75. [DOI: 10.14218/jerp.2021.00051] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
|
35
|
Bibi S, Mir S, Rehman W, Menaa F, Gul A, Alaryani FSS, Alqahtani AM, Haq S, Abdellatif MH. Synthesis and In Vitro/Ex Vivo Characterizations of Ceftriazone-Loaded Sodium Alginate/Poly(Vinyl Alcohol) Clay Reinforced Nanocomposites: Possible Applications in Wound Healing. MATERIALS 2022; 15:ma15113885. [PMID: 35683183 PMCID: PMC9182010 DOI: 10.3390/ma15113885] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/12/2022] [Revised: 05/09/2022] [Accepted: 05/23/2022] [Indexed: 01/27/2023]
Abstract
(1) Background: Nanocomposite films are widely applied in the pharmaceutical industry (e.g., nanodrug delivery systems—NDDS). Indeed, these nanomaterials can be produced at a large industrial scale and display valuable properties (e.g., antibacterial, renewability, biodegradability, bioavailability, safety, tissue-specific targeting, and biocompatibility), which can enhance the activity of conventional marketed drugs. (2) Aim: To fabricate and investigate the in vitro properties of the antibiotic ceftriaxone sodium (CTX) once encapsulated into sodium alginate (SA)/poly(vinyl alcohol)PVA-clay reinforced nanocomposite films. (3) Methods: Different ratios of the polymers (i.e., SA, PVA) and CTX drug were used for the synthesis of nanocomposite films by solvent casting technique. Montmorillonite (MMT), modified organically, was added as a nanofiller to increase their thermal and mechanical strength. The prepared samples were physically characterized by thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electronic microscopy (SEM), and energy-dispersive X-ray analysis (EDX). The physicochemical behavior (i.e., swelling, erosion, dissolution/drug release behavior and rat skin permeation) was also assessed. Comparisons were made with the currently marketed free CTX dosage form. (4) Results: TGA of the nanoformulation showed increased thermostability. XRD revealed its semi-crystalline nature. SEM depicted a homogeneous drug-loaded SA/PVA nanocomposite with an average size ranging between 300 and 500 nm. EDX confirmed the elemental composition and uniform distribution of mixing components. The water entrapment efficiency study showed that the highest swelling and erosion ratio is encountered with the nanoformulations S100(3) and S100D15(3). Ex vivo permeation revealed a bi-step discharge mode with an early burst liberation chased by continued drug discharge of devised nanoparticles (NPs). The dissolution studies of the drug-loaded polymer nanocomposites elicited sustained pH-dependent drug release. The cumulative drug release was the highest (90.93%) with S100D15(3). (5) Conclusion: S100D15(3) was the finest formulation. To the best of our knowledge, we also pioneered the use of solvent casting for the preparation of such nanoformulations. Polymers and reinforcing agent, concentrations and pH were rate-deterring features for the preparation of the optimized formulation. Thus, CTX-loaded SA/PVA-MMT reinforced nanocomposite appeared as a promising nanodrug delivery system (NDDS) based on its in vitro physicochemical properties.
Collapse
Affiliation(s)
- Shabana Bibi
- Department of Chemistry, Hazara University, Mansehra 21220, Pakistan;
| | - Sadullah Mir
- Department of Chemistry, COMSATS University Islamabad, Abbottabad Campus, Islamabad 22060, Pakistan;
| | - Wajid Rehman
- Department of Chemistry, Hazara University, Mansehra 21220, Pakistan;
- Correspondence: (W.R.); (F.M.)
| | - Farid Menaa
- Departments of Internal Medicine and Nanomedicine, California Innovations Corporation, San Diego, CA 92037, USA
- Correspondence: (W.R.); (F.M.)
| | - Alia Gul
- Department of Botany, Hazara University, Mansehra 21220, Pakistan;
| | | | - Ali M. Alqahtani
- Department of Pharmacology, College of Pharmacy, King Khalid University, Guraiger, Abha 62529, Saudi Arabia;
| | - Sirajul Haq
- Department of Chemistry, University of Azad Jammu & Kashmir, Muzaffarabad 13100, Pakistan;
| | - Magda H. Abdellatif
- Department of Chemistry, College of Sciences, Taif University, Taif 21944, Saudi Arabia;
| |
Collapse
|
36
|
Yang Y, Xu L, Wang J, Meng Q, Zhong S, Gao Y, Cui X. Recent advances in polysaccharide-based self-healing hydrogels for biomedical applications. Carbohydr Polym 2022; 283:119161. [DOI: 10.1016/j.carbpol.2022.119161] [Citation(s) in RCA: 15] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/27/2021] [Revised: 01/04/2022] [Accepted: 01/18/2022] [Indexed: 12/22/2022]
|
37
|
Okuda K, Shigemasa R, Hirota K, Mizutani T. In Situ Crystallization of Hydroxyapatite on Carboxymethyl Cellulose as a Biomimetic Approach to Biomass-Derived Composite Materials. ACS OMEGA 2022; 7:12127-12137. [PMID: 35449963 PMCID: PMC9016835 DOI: 10.1021/acsomega.2c00423] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/21/2022] [Accepted: 03/22/2022] [Indexed: 05/07/2023]
Abstract
Nanohydroxyapatite (HAP) was crystallized in an aqueous solution of carboxymethyl cellulose (CMC) to prepare the composites of CMC and HAP with a stable interface between them with the aim of developing a sustainable tough biomass composite material inspired by bone. The temperature (room temperature to 90 °C) and the concentration of CMC (0.83-13.2 g/L) were optimized for the mechanical properties of the composites. The composite containing 67 wt % HAP prepared at 50 °C in the presence of 9.9 g/L CMC exhibited the largest flexural strength of 113 ± 2 MPa and the elastic modulus of 7.7 ± 0.3 GPa. X-ray diffraction showed that nanometer-sized HAP crystals were formed with a large aspect ratio, and energy-dispersive X-ray spectroscopy and infrared spectroscopy revealed that CMC was bound to the surface of HAP through an ionic interaction between Ca2+ and COO-. Since the composite has a higher flexural strength than polyamide 6 (92 MPa) and a higher elastic modulus than polyamide 6 with 40 wt % glass fiber (5.5 GPa), it can be used as new tough biomass composite material to replace petroleum-derived engineering plastics.
Collapse
|
38
|
Stengelin E, Thiele J, Seiffert S. Multiparametric Material Functionality of Microtissue-Based In Vitro Models as Alternatives to Animal Testing. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2105319. [PMID: 35043598 PMCID: PMC8981905 DOI: 10.1002/advs.202105319] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/30/2021] [Indexed: 05/12/2023]
Abstract
With the definition of the 3R principle by Russel and Burch in 1959, the search for an adequate substitute for animal testing has become one of the most important tasks and challenges of this time, not only from an ethical, but also from a scientific, economic, and legal point of view. Microtissue-based in vitro model systems offer a valuable approach to address this issue by accounting for the complexity of natural tissues in a simplified manner. To increase the functionality of these model systems and thus make their use as a substitute for animal testing more likely in the future, the fundamentals need to be continuously improved. Corresponding requirements exist in the development of multifunctional, hydrogel-based materials, whose properties are considered in this review under the aspects of processability, adaptivity, biocompatibility, and stability/degradability.
Collapse
Affiliation(s)
- Elena Stengelin
- Department of ChemistryJohannes Gutenberg‐University MainzD‐55128MainzGermany
| | - Julian Thiele
- Leibniz‐Institut für Polymerforschung Dresden e.V.Hohe Straße 6D‐01069DresdenGermany
| | - Sebastian Seiffert
- Department of ChemistryJohannes Gutenberg‐University MainzD‐55128MainzGermany
| |
Collapse
|
39
|
Rajput A, Kulkarni M, Deshmukh P, Pingale P, Garkal A, Gandhi S, Butani S. A Key Role by Polymers in Microneedle Technology: A New Era. Drug Dev Ind Pharm 2022; 47:1713-1732. [PMID: 35332822 DOI: 10.1080/03639045.2022.2058531] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/10/2023]
Abstract
The skin serves as the major organ in the targeted transdermal drug delivery system for many compounds. The microneedle acts as a novel technique to deliver drugs across the different layers of the skin, including the major barrier stratum corneum, in an effective manner. A microneedle array patch comprises dozens to hundreds of micron-sized needles with numerous structures and advantages resulting from their special and smart designs. Microneedle approach is much more advanced than conventional transdermal delivery pathways due to several benefits like minimally invasive, painless, self-administrable, and enhanced patient compliance. The microneedles are classified into hollow, solid, coated, dissolving, and hydrogel. Several polymers are used to fabricate microneedle, such as natural, semi-synthetic, synthetic, biodegradable, and swellable polymers. Researchers in the preparation of microneedles also explored the combinations of polymers. The safety of the polymer used in microneedle is a crucial aspect to prevent toxicity in vivo. Thus, this review aims to provide a detailed review of microneedles and mainly focus on the various polymers used in the fabrication of microneedles.
Collapse
Affiliation(s)
- Amarjitsing Rajput
- Department of Pharmaceutics, Poona College of Pharmacy, Bharati Vidyapeeth Deemed to Be University, Paud Road, Erandwane, Pune-411038, Maharashtra, India.,Department of Pharmaceutics and Pharmaceutical Technology, Institute Pharmacy, Nirma University, S.G. Highway, Ahmedabad-382481, Gujarat, India
| | - Madhur Kulkarni
- SCES's Indira College of Pharmacy, New Pune Mumbai Highway, Tathwade-411033, Pune, Maharashtra, India
| | - Prashant Deshmukh
- Dr. Rajendra Gode College of Pharmacy, Malkapur, Buldana- 443101, Maharashtra, India
| | - Prashant Pingale
- Department of Pharmaceutics, GES's Sir Dr. M. S. Gosavi College of Pharmaceutical Education and Research, Nashik-422005, Maharashtra, India
| | - Atul Garkal
- Department of Pharmaceutics and Pharmaceutical Technology, Institute Pharmacy, Nirma University, S.G. Highway, Ahmedabad-382481, Gujarat, India
| | - Sahil Gandhi
- Department of Pharmaceutics, Shobhaben Pratapbhai Patel School of Pharmacy and Technology Management, SVKM'S NMIMS, V. L. Mehta Road, Vile Parle (W), Mumbai 400056, Maharashtra, India
| | - Shital Butani
- Department of Pharmaceutics and Pharmaceutical Technology, Institute Pharmacy, Nirma University, S.G. Highway, Ahmedabad-382481, Gujarat, India
| |
Collapse
|
40
|
Fatimi A, Okoro OV, Podstawczyk D, Siminska-Stanny J, Shavandi A. Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review. Gels 2022; 8:179. [PMID: 35323292 PMCID: PMC8948717 DOI: 10.3390/gels8030179] [Citation(s) in RCA: 74] [Impact Index Per Article: 37.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/17/2022] [Revised: 03/09/2022] [Accepted: 03/10/2022] [Indexed: 02/06/2023] Open
Abstract
Three-dimensional (3D) printing is well acknowledged to constitute an important technology in tissue engineering, largely due to the increasing global demand for organ replacement and tissue regeneration. In 3D bioprinting, which is a step ahead of 3D biomaterial printing, the ink employed is impregnated with cells, without compromising ink printability. This allows for immediate scaffold cellularization and generation of complex structures. The use of cell-laden inks or bio-inks provides the opportunity for enhanced cell differentiation for organ fabrication and regeneration. Recognizing the importance of such bio-inks, the current study comprehensively explores the state of the art of the utilization of bio-inks based on natural polymers (biopolymers), such as cellulose, agarose, alginate, decellularized matrix, in 3D bioprinting. Discussions regarding progress in bioprinting, techniques and approaches employed in the bioprinting of natural polymers, and limitations and prospects concerning future trends in human-scale tissue and organ fabrication are also presented.
Collapse
Affiliation(s)
- Ahmed Fatimi
- Department of Chemistry, Polydisciplinary Faculty, Sultan Moulay Slimane University, P.O. Box 592 Mghila, Beni-Mellal 23000, Morocco
- ERSIC, Polydisciplinary Faculty, Sultan Moulay Slimane University, P.O. Box 592 Mghila, Beni-Mellal 23000, Morocco
| | - Oseweuba Valentine Okoro
- 3BIO-BioMatter, École Polytechnique de Bruxelles, Université Libre de Bruxelles (ULB), Avenue F.D. Roosevelt, 50-CP 165/61, 1050 Brussels, Belgium; (O.V.O.); (J.S.-S.)
| | - Daria Podstawczyk
- Department of Process Engineering and Technology of Polymer and Carbon Materials, Faculty of Chemistry, Wroclaw University of Science and Technology, Norwida 4/6, 50-373 Wroclaw, Poland;
| | - Julia Siminska-Stanny
- 3BIO-BioMatter, École Polytechnique de Bruxelles, Université Libre de Bruxelles (ULB), Avenue F.D. Roosevelt, 50-CP 165/61, 1050 Brussels, Belgium; (O.V.O.); (J.S.-S.)
- Department of Process Engineering and Technology of Polymer and Carbon Materials, Faculty of Chemistry, Wroclaw University of Science and Technology, Norwida 4/6, 50-373 Wroclaw, Poland;
| | - Amin Shavandi
- 3BIO-BioMatter, École Polytechnique de Bruxelles, Université Libre de Bruxelles (ULB), Avenue F.D. Roosevelt, 50-CP 165/61, 1050 Brussels, Belgium; (O.V.O.); (J.S.-S.)
| |
Collapse
|
41
|
Suryadi H, Judono JJ, Putri MR, Eclessia AD, Ulhaq JM, Agustina DN, Sumiati T. Biodelignification of lignocellulose using ligninolytic enzymes from white-rot fungi. Heliyon 2022; 8:e08865. [PMID: 35141441 PMCID: PMC8814692 DOI: 10.1016/j.heliyon.2022.e08865] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/01/2021] [Revised: 11/17/2021] [Accepted: 01/27/2022] [Indexed: 11/25/2022] Open
Abstract
Lignocellulose is the most abundant biomass available on earth, including wood and agricultural wastes such as rice straw, corn cobs, and oil palm empty bunches. The biopolymer content in lignocellulose has a great potential as feedstock for producing industrial raw materials such as glucose, sorbitol, xylose, xylitol, and other pharmaceutical excipients. Currently, scientists and governments agree that the enzymatic delignification method is an environmentally friendly green method to be applied. This review attempts to explain the proper preparation of the enzymes laccase, lignin peroxidase, and manganese peroxidase, as well as the important factors influencing their activity. The recent applications of the enzymes for detoxification of hazardous substances, proper enzyme immobilization technique, and future prospect combination with DESs extraction of lignin are also discussed.
Collapse
Affiliation(s)
- Herman Suryadi
- Faculty of Pharmacy, Universitas Indonesia, Depok, 16424, West Java, Indonesia
| | - Jessica J. Judono
- Faculty of Pharmacy, Universitas Indonesia, Depok, 16424, West Java, Indonesia
| | - Merianda R. Putri
- Faculty of Pharmacy, Universitas Indonesia, Depok, 16424, West Java, Indonesia
| | - Alma D. Eclessia
- Faculty of Pharmacy, Universitas Indonesia, Depok, 16424, West Java, Indonesia
| | - Jiihan M. Ulhaq
- Faculty of Pharmacy, Universitas Indonesia, Depok, 16424, West Java, Indonesia
| | - Dinar N. Agustina
- Faculty of Pharmacy, Universitas Indonesia, Depok, 16424, West Java, Indonesia
| | - Triyani Sumiati
- Faculty of Pharmacy, Universitas Indonesia, Depok, 16424, West Java, Indonesia
| |
Collapse
|
42
|
Verma C, Quraishi M, Rhee KY. Aqueous phase polymeric corrosion inhibitors: Recent advancements and future opportunities. J Mol Liq 2022. [DOI: 10.1016/j.molliq.2021.118387] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/04/2023]
|
43
|
Parhi R, Sahoo SK, Das A. Applications of polysaccharides in topical and transdermal drug delivery: A recent update of literature. BRAZ J PHARM SCI 2022. [DOI: 10.1590/s2175-97902022e20802] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023] Open
Affiliation(s)
| | | | - Anik Das
- GITAM Deemed to be University, India
| |
Collapse
|
44
|
|
45
|
da Silva JB, Dos Santos RS, Vecchi CF, Bruschi ML. Drug Delivery Platforms Containing Thermoresponsive Polymers and Mucoadhesive Cellulose Derivatives: A Review of Patents. RECENT ADVANCES IN DRUG DELIVERY AND FORMULATION 2022; 16:90-102. [PMID: 35379163 DOI: 10.2174/2667387816666220404123625] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/17/2021] [Revised: 11/09/2021] [Accepted: 02/15/2022] [Indexed: 06/14/2023]
Abstract
Nowadays, the development of mucoadhesive systems for drug delivery has gained keen interest, with enormous potential in applications through different routes. Mucoadhesion characterizes an attractive interaction between the pharmaceutical dosage form and the mucosal surface. Many polymers have shown the ability to interact with mucus, increasing the residence time of local and/or systemic administered preparations, such as tablets, patches, semi-solids, and micro and nanoparticles. Cellulose is the most abundant polymer on the earth. It is widely used in the pharmaceutical industry as an inert pharmaceutical ingredient, mainly in its covalently modified forms: methylcellulose, ethylcellulose, hydroxyethyl cellulose, hydroxypropyl cellulose, hydroxypropyl methylcellulose, and carboxymethylcellulose salts. Aiming to overcome the drawbacks of oral, ocular, nasal, vaginal, and rectal routes and thereby maintaining patient compliance, innovative polymer blends have gained the interest of the pharmaceutical industry. Combining mucoadhesive and thermoresponsive polymers allows for simultaneous in situ gelation and mucoadhesion, thus enhancing the retention of the system at the site of administration and drug availability. Thermoresponsive polymers have the ability to change physicochemical properties triggered by temperature, which is particularly interesting considering the physiological temperature. The present review provides an analysis of the main characteristics and applications of cellulose derivatives as mucoadhesive polymers and their use in blends together with thermoresponsive polymers, aiming at platforms for drug delivery. Patents were reviewed, categorized, and discussed, focusing on the applications and pharmaceutical dosage forms using this innovative strategy. This review manuscript also provides a detailed introduction to the topic and a perspective on further developments.
Collapse
Affiliation(s)
- Jéssica Bassi da Silva
- Department of Pharmacy, Postgraduate Program in Pharmaceutical Sciences, Laboratory of Research and Development of Drug Delivery Systems, State University of Maringa, Maringa, PR, Brazil
| | - Rafaela Said Dos Santos
- Department of Pharmacy, Postgraduate Program in Pharmaceutical Sciences, Laboratory of Research and Development of Drug Delivery Systems, State University of Maringa, Maringa, PR, Brazil
| | - Camila Felix Vecchi
- Department of Pharmacy, Postgraduate Program in Pharmaceutical Sciences, Laboratory of Research and Development of Drug Delivery Systems, State University of Maringa, Maringa, PR, Brazil
| | - Marcos Luciano Bruschi
- Department of Pharmacy, Postgraduate Program in Pharmaceutical Sciences, Laboratory of Research and Development of Drug Delivery Systems, State University of Maringa, Maringa, PR, Brazil
| |
Collapse
|
46
|
Recent Trends in Assessment of Cellulose Derivatives in Designing Novel and Nanoparticulate-Based Drug Delivery Systems for Improvement of Oral Health. Polymers (Basel) 2021; 14:polym14010092. [PMID: 35012115 PMCID: PMC8747402 DOI: 10.3390/polym14010092] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/03/2021] [Revised: 12/21/2021] [Accepted: 12/25/2021] [Indexed: 12/22/2022] Open
Abstract
Natural polymers are revolutionizing current pharmaceutical dosage forms design as excipient and gained huge importance because of significant influence in formulation development and drug delivery. Oral health refers to the health of the teeth, gums, and the entire oral-facial system that allows us to smile, speak, and chew. Since years, biopolymers stand out due to their biocompatibility, biodegradability, low toxicity, and stability. Polysaccharides such as cellulose and their derivatives possess properties like novel mechanical robustness and hydrophilicity that can be easily fabricated into controlled-release dosage forms. Cellulose attracts the dosage design attention because of constant drug release rate from the precursor nanoparticles. This review discusses the origin, extraction, preparation of cellulose derivatives and their use in formulation development of nanoparticles having multidisciplinary applications as pharmaceutical excipient and in drug delivery, as bacterial and plant cellulose have great potential for application in the biomedical area, including dentistry, protein and peptide delivery, colorectal cancer treatment, and in 3D printable dosage forms.
Collapse
|
47
|
Formulation of Microwave-Assisted Natural-Synthetic Polymer Composite Film and Its Physicochemical Characterization. INT J POLYM SCI 2021. [DOI: 10.1155/2021/9961710] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
Abstract
This study is aimed at microwave-assisted synthesis of sodium carboxymethylcellulose and Eudragit L100 composite film and its physicochemical characterization. The film was developed with varying quantities of each polymer and treated with microwave at a fixed frequency of 2450 MHz with a power of 350 Watts for 60 and 120 s. All formulations were characterized for thickness/weight uniformity, moisture adsorption, erosion and water uptake, tensile strength, and vibrational, thermal, and surface morphological analysis in comparison with untreated film samples. Results indicated that microwave treatment for 60 s significantly improved the tensile strength, reduced the water adsorption, delayed erosion, and reduced the water uptake in comparison with the untreated and 120 s treated film formulations. The vibrational analysis revealed rigidification of hydrophilic domains at OH/NH moiety and fluidization of hydrophobic domains at asymmetric and symmetric CH moieties, which is envisaged to be due to the formation of new linkages between the two polymers. These were later confirmed by thermal analysis where a significant rise in transition temperature, as well as enthalpy of the system, was recorded. The microwave treatment for 60 s is thus advocated to be the best treatment condition for developing sodium carboxymethylcellulose and Eudragit L100 composite polymeric films.
Collapse
|
48
|
Sharma S, Sathasivam T, Rawat P, Pushpamalar J. Lycopene-loaded nanostructured lipid carrier from carboxymethyl oil palm empty fruit bunch cellulose for topical administration. CARBOHYDRATE POLYMER TECHNOLOGIES AND APPLICATIONS 2021. [DOI: 10.1016/j.carpta.2021.100049] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022] Open
|
49
|
Jadhav S, Ganvir V, Shinde Y, Revankar S, Thakre S, Singh MK. Carboxylate functionalized imidazolium-based zwitterions as benign and sustainable solvent for cellulose dissolution: Synthesis and characterization. J Mol Liq 2021. [DOI: 10.1016/j.molliq.2021.117724] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
50
|
Microencapsulating polymers for probiotics delivery systems: Preparation, characterization, and applications. Food Hydrocoll 2021. [DOI: 10.1016/j.foodhyd.2021.106882] [Citation(s) in RCA: 22] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
|