Study on the Antimicrobial Properties of Citrate-Based Biodegradable Polymers

A Nontoxic and Biocompatible Method for Augmenting Mechanical Strength of Acellular Matrix by Silk Fibroin Impregnation

Biological scaffolds are plagued by poor biomechanical properties and untimely degradation. These limitations have yet to be addressed without compromising their biocompatibility. It is desirable to avoid inflammation and have degradation with concomitant host collagen deposition or even site-appropriate in situ regeneration for the successful outcome of an implanted biological scaffold. This work aims to achieve this by utilizing a biocompatible method to modify acellular scaffolds by impregnating alkaline-catalyzed citric acid (CA) cross-linking between the extracellular matrix proteins and silk fibroin (SF)/SF-gelatin (SFG) blends. Combinatorial detergent decellularization was employed to prepare a decellularized porcine liver scaffold (DPL). After proving the decellularization efficiency, the scaffold underwent modification by vacuum impregnation with CA containing SF (SF100DPL) and SFG blends (SFG5050DPL and SFG3070DPL) following pre-cross-linking, drying, and post-cross-linking. The subsequent strength augmentation was demonstrated by significant improvement in tensile strength from 2.4 ± 0.4 MPa (DPL) to, 3.8 ± 0.7 MPa (SF100DPL), 3.4 ± 0.7 MPa (SFG5050DPL), and 3.5 ± 0.2 MPa (SFG3070DPL); Young's modulus from 8.7 ± 1.8 MPa (DPL) to 20 ± 1.9 MPa (SF100DPL), 13.3 ± 2.6 MPa (SFG5050DPL), and 16 ± 1.2 MPa (SFG3070DPL); and suture retention strength from 0.9 ± 0.08 MPa (DPL) to 2.3 ± 0.2 MPa (SF100DPL), 2.8 ± 1.2 MPa (SFG5050DPL), and 2.6 ± 0.9 MPa (SFG3070DPL). The degradation resistance of the modified scaffolds was also markedly improved. Being cytocompatible, its ability to incite tolerable inflammatory and immune responses was confirmed by rat subcutaneous implantation for 14, 30, and 90 days, in terms of inflammatory cell infiltration, neoangiogenesis, and in vitro cytokine release to assess B-cell and T-cell activation. Such ECM composite scaffolds with appropriate strength and biocompatibility offer great promise in soft tissue repair applications such as skin grafting.

Clinical use and applications of a citrate-based antiseptic lavage for the prevention and treatment of PJI

Total joint arthroplasties (TJA) are some of the most commonly performed surgeries in the United States with the number of TJA expected to rise significantly over the next decade as the population ages and arthritic burden worsens. However, the rise in TJA volume correlates with a heightened risk of complications, notably prosthetic joint infections (PJI), despite their low occurrence rate of less than 2%. PJI imposes a significant burden on surgery success, patient well-being, and healthcare costs, with an estimated annual expense of 1.85 billion dollars for hip and knee PJI by 2030. This manuscript delves into the pathophysiology of PJI, exploring our current understanding of the role of bacterial biofilm formation on implanted foreign hardware, providing protection against the host immune system and antibiotics. The article reviews current agents and their efficacy in treating PJI, as well as their cytotoxicity toward native cells involved in wound healing, prompting the exploration of a novel citrate-based solution. The paper highlights the superior properties and efficacy of a novel citrate-based irrigation solution on the treatment and prevention of PJI via increased antimicrobial properties, greater biofilm disruption, increased exposure time, and reduced cytotoxicity compared to conventional solutions, positioning it as a promising alternative. It also provides a perspective on its clinical use in the operating theater, with a step-by-step approach in TJA, whether primary or revisionary.

Enhancing citric acid tolerance of Acetobacter tropicalis using chemical and physical mutagenesis and adaptive evolution to improve the quality of lemon fruit vinegar

The high concentration of citric acid in lemons limits the production of lemon fruit vinegar because it inhibits the metabolism of acetic acid bacteria and reduces the utilization of raw materials. This study aimed to enhance the citric acid tolerance of Acetobacter tropicalis by using complex mutagenesis and adaptive laboratory evolution (ALE) and improving the quality of lemon fruit vinegar. After mutagenesis and ALE, A. tropicalis JY-135 grew well under 40 g/L citric acid, and it showed high physiological activity and excellent fermentation performance under high concentrations of citric acid. The survival rate and ATP content of JY-135 were 15.27 and 9.30 times higher than that of the original strain J-2736. In the fermentation of lemon fruit vinegar, the acid production and the number of aroma-active compounds were 1.61-fold and 2.17-fold than J-2736. In addition, we found that citric acid tolerance of JY-135 is related to the respiratory electron-transport chain and the tricarboxylic acid (TCA) cycle. This work is of great significance for the production of high-quality lemon fruit vinegar and the enrichment of seed resources of acetic acid bacteria.

Citrate silver nanoparticles impregnated cellulose as a photocatalytic filter in the degradation of organic dye in the aqueous media

Photocatalysis is a clean and efficient process pursued under light irradiation with a suitable photocatalyst to degrade a contaminant. We report citrate functionalization of silver nanoparticles (SNPs) for effective immobilization on cellulosic fabric. The porous cellulosic matrix could be explored as microfiltration membranes for the photocatalytic degradation of organic dyes in the aqueous media. Where valid, the citrate functionalized SNPs and the treated cellulose fabrics were considered for optical, structural, surface chemical, thermal, textile, flowability, photocatalytic, and antibacterial attributes. The SNPs expressed the bandgap energy of 2.56 and 2.43 eV and Urbach energy of 3.38 and 5.21 eV before and after functionalization with the citrate moieties, respectively. The liquid chromatographic and FTIR analyses indicated that the crystal violet (CV) organic dye has been successfully photodegraded to environmentally safer and nontoxic species on passing the contaminated water through the SNPs-treated cellulosic filter. The spectroscopic data also supported the said outcomes. The results demonstrated that the citrate-SNPs-treated cellulose could be efficiently employed as antibacterial photocatalytic membranes for degrading organic dyes in the aqueous media for multiple cycles.

The Effect of Citric and Ascorbic Acids as Anti-Biofilm and Anti-Capsular Agents on Multidrug-Resistant Acinetobacter baumannii

OBJECTIVE

Acinetobacter baumannii (A. baumannii) is an opportunistic bacterium with multiple virulence factors, including capsule and biofilm, and is known for its high drug resistance. Anti-virulence natural substances have been suggested as novel alternatives to conventional antibiotics. We aimed to evaluate the effect of citric and ascorbic acids as anti-biofilm and anti-capsular agents against multidrug-resistant (MDR) A. baumannii clinical isolates.

MATERIALS AND METHODS

Twenty-eight A. baumannii MDR isolates were collected from different clinical sources. The minimum inhibitory concentration (MIC) of each agent was estimated. Biofilm formation and capsule were investigated phenotypically in the absence and presence of both agents at ½ and ¼ MICs. The presence of 14 adhesive and nonadhesive virulence genes was investigated.

RESULTS

Phenotypically, all the isolates were biofilm producers and were capsulated. The MIC of citric acid ranged from 1.25 to 2.5 mg/mL, while that of ascorbic acid was 3 mg/mL for all isolates. Both agents showed significant reduction in biofilm and capsular thinning. Ascorbic acid showed a dose-dependent effect in both biofilm reduction and capsule thinning unlike citric acid. Four genes, papG23, sfa1, fyuA, and cvaC, were absent among all isolates, while iutA was present in 100% of isolates. Other genes showed different distributions among the isolates. These virulence genes were not correlated to the anti-biofilm effect of both agents. Ascorbic acid was observed to have a better effect than citric acid. This can provide a clue for a better treatment regimen including ascorbic acid against MDR A. baumannii infections.

Citrate-Based Polyester Elastomer with Artificially Regulatable Degradation Rate on Demand

Citrate-based polymers are commonly used to create biodegradable implants. In an era of personalized medicine, it is highly desired that the degradation rates of citrate-based implants can be artificially regulated as required during clinical applications. Unfortunately, current citrate-based polymers only undergo passive degradation, which follows a specific degradation profile. This presents a considerable challenge for the use of citrate-based implants. To address this, a novel citrate-based polyester elastomer (POCSS) with artificially regulatable degradation rate is developed by incorporating disulfide bonds (S-S) into the backbone chains of the crosslinking network of poly(octamethylene citrate) (POC). This POCSS exhibits excellent and tunable mechanical properties, notable antibacterial properties, good biocompatibility, and low biotoxicity of its degradation products. The degradation rate of the POCSS can be regulated by breaking the S-S in its crosslinking network using glutathione (GSH). After a period of subcutaneous implantation of POCSS scaffolds in mice, the degradation rate eventually increased by 2.46 times through the subcutaneous administration of GSH. Notably, we observed no significant adverse effects on its surrounding tissues, the balance of the physiological environment, major organs, and the health status of the mice during degradation.

Microbial Polysaccharide-Based Formulation with Silica Nanoparticles; A New Hydrogel Nanocomposite for 3D Printing

Natural polysaccharides are highly attractive biopolymers recommended for medical applications due to their low cytotoxicity and hydrophilicity. Polysaccharides and their derivatives are also suitable for additive manufacturing, a process in which various customized geometries of 3D structures/scaffolds can be achieved. Polysaccharide-based hydrogel materials are widely used in 3D hydrogel printing of tissue substitutes. In this context, our goal was to obtain printable hydrogel nanocomposites by adding silica nanoparticles to a microbial polysaccharide's polymer network. Several amounts of silica nanoparticles were added to the biopolymer, and their effects on the morpho-structural characteristics of the resulting nanocomposite hydrogel inks and subsequent 3D printed constructs were studied. FTIR, TGA, and microscopy analysis were used to investigate the resulting crosslinked structures. Assessment of the swelling characteristics and mechanical stability of the nanocomposite materials in a wet state was also conducted. The salecan-based hydrogels displayed excellent biocompatibility and could be employed for biomedical purposes, according to the results of the MTT, LDH, and Live/Dead tests. The innovative, crosslinked, nanocomposite materials are recommended for use in regenerative medicine.

Engineering multifunctional bioactive citrate-based biomaterials for tissue engineering

Developing bioactive biomaterials with highly controlled functions is crucial to enhancing their applications in regenerative medicine. Citrate-based polymers are the few bioactive polymer biomaterials used in biomedicine because of their facile synthesis, controllable structure, biocompatibility, biomimetic viscoelastic mechanical behavior, and functional groups available for modification. In recent years, various multifunctional designs and biomedical applications, including cardiovascular, orthopedic, muscle tissue, skin tissue, nerve and spinal cord, bioimaging, and drug or gene delivery based on citrate-based polymers, have been extensively studied, and many of them have good clinical application potential. In this review, we summarize recent progress in the multifunctional design and biomedical applications of citrate-based polymers. We also discuss the further development of multifunctional citrate-based polymers with tailored properties to meet the requirements of various biomedical applications.

•

Multifunctional bioactive citrate-based biomaterials have broad applications in regenerative medicine.

•

Recent advances in multifunctional design and biomedical applications of citate-based polymers are summarized.

•

Future challenge of citrate-based polymers in various biomedical applications are discussed.

Hydrophobic ion pairing-based self-emulsifying drug delivery systems: a new strategy for improving the therapeutic efficacy of water-soluble drugs

INTRODUCTION

Self-emulsifying drug delivery systems (SEDDS) are formulations consisting of oil phase, emulsifiers, and co-emulsifiers, which can be spontaneously emulsified in the body to form O/W microemulsion. Traditionally, SEDDS are used commercially for the improvement of oral absorption and in vivo performances for poorly water-soluble drugs. However, SEDDS formulations were rarely reported for the delivery of water-soluble drugs. Recent studies have found that SEDDS have the potential for water-soluble macromolecular drugs by the application of the hydrophobic ion pairing (HIP) technology.

AREAS COVERED

This review summarized the characteristics of HIP complexes in SEDDS and introduced their advantages and discussed the future prospects of HIP-based SEDDS in drug delivery.

EXPERT OPINION

Hydrophobic ion pairing (HIP) is a technology that combines lipophilic structures on polar counterions to increase the lipophilicity through electrostatic interaction. Recent studies showed that HIP-based SEDDS offer an effective way to increase the mucosal permeability and improve the chemical stability for antibiotics, proteases, DNA-based drugs, and other water-soluble macromolecular drugs. It is believed that HIP-based SEDDS offer a potential and attractive method capable of delivering hydrophilic macromolecules with ionizable groups for oral administration.

Controlling of Mycobacterium by Natural Degradant-Combination Models for Sequestering Mycolic Acids in Karish Cheese

Degradation of the mycobacterial complex containing mycolic acids (MAs) by natural bioactive compounds is essential for producing safe and value-added foods with therapeutic activities. This study aimed to determine the degradation efficiency of natural organic acid extracts (i.e., citric, malic, tartaric, and lactic), quadri-mix extract from fruits and probiotics (i.e., lemon, apple, grape, and cell-free supernatant of Lactobacillus acidophilus), and synthetic pure organic acids (i.e., citric, malic, tartaric, and lactic), against MA in vitro in phosphate buffer solution (PBS) and Karish cheese models. The degradation effect was evaluated both individually and in combinations at different concentrations of degradants (1, 1.5, and 2%) and at various time intervals (0, 6, 12, 24, and 48 h). The results show that MA degradation percentage recorded its highest value at 2% of mixed fruit extract quadri-mix with L. acidophilus and reached 99.2% after 48 h both in PBS and Karish cheese, unlike other treatments (i.e., citric + malic + tartaric + lactic), individual acids, and sole extracts at all concentrations. Conversely, organic acid quadri-mix revealed the greatest MA degradation% of 95.9, 96.8, and 97.3% at 1, 1.5, and 2%, respectively, after 48 h. Citric acid was more effective in MA degradation than other acids. The fruit extract quadri-mix combined with L. acidophilus-fortified Karish cheese showed the highest sensorial characteristics; hence, it can be considered a novel food-grade degradant for MA and could be a promising biocontrol candidate against Mycobacterium tuberculosis (Mtb) in food matrices.

Development of Biodegradable Osteopromotive Citrate-Based Bone Putty

The burden of bone fractures demands development of effective biomaterial solutions, while additional acute events such as noncompressible bleeding further motivate the search for multi-functional implants to avoid complications including osseous hemorrhage, infection, and nonunion. Bone wax has been widely used in orthopedic bleeding control due to its simplicity of use and conformation to irregular defects; however, its nondegradability results in impaired bone healing, risk of infection, and significant inflammatory responses. Herein, a class of intrinsically fluorescent, osteopromotive citrate-based polymer/hydroxyapatite (HA) composites (BPLP-Ser/HA) as a highly malleable press-fit putty is designed. BPLP-Ser/HA putty displays mechanics replicating early nonmineralized bone (initial moduli from ≈2-500 kPa), hydration induced mechanical strengthening in physiological conditions, tunable degradation rates (over 2 months), low swelling ratios (<10%), clotting and hemostatic sealing potential (resistant to blood pressure for >24 h) and significant adhesion to bone (≈350-550 kPa). Simultaneously, citrate's bioactive properties result in antimicrobial (≈100% and 55% inhibition of S. aureus and E. coli) and osteopromotive effects. Finally, BPLP-Ser/HA putty demonstrates in vivo regeneration in a critical-sized rat calvaria model equivalent to gold standard autograft. BPLP-Ser/HA putty represents a simple, off-the-shelf solution to the combined challenges of acute wound management and subsequent bone regeneration.

Synthesis and characterization of a novel pH-responsive drug-releasing nanocomposite hydrogel for skin cancer therapy and wound healing

Local skin cancer recurrence occurs in ∼12% of the patients post-surgery due to persistent growth of residual cancer cells. Wound infection is another significant complication following surgery. We report a novel in situ-forming nanocomposite hydrogel (NCH) containing PLGA-carboxymethyl chitosan nanoparticles (186 nm) for localized pH-responsive skin cancer therapy and wound healing. This injectable hydrogel, comprising of a citric acid-derived polymer backbone, gelled within 5 minutes, and demonstrated excellent swelling (283% of dry weight) and compressive strengths (∼5.34 MPa). Nanoparticle incorporation did not significantly affect hydrogel properties. The NCH effluents were cytocompatible with human dermal fibroblasts at 500 μg ml-1 concentration and demonstrated pH-dependent drug release and promising therapeutic efficacy against A431 and G361 skin cancer cells in vitro. Significant zones of inhibition were observed in S. aureus and E. coli cultures on NCH treatment, confirming its antibacterial properties. Our studies show that the pH-responsive NCH can be potentially used for adjuvant skin cancer treatment and wound healing.

Phototherapy and optical waveguides for the treatment of infection

With rapid emergence of multi-drug resistant microbes, it is imperative to seek alternative means for infection control. Optical waveguides are an auspicious delivery method for precise administration of phototherapy. Studies have shown that phototherapy is promising in fighting against a myriad of infectious pathogens (i.e. viruses, bacteria, fungi, and protozoa) including biofilm-forming species and drug-resistant strains while evading treatment resistance. When administered via optical waveguides, phototherapy can treat both superficial and deep-tissue infections while minimizing off-site effects that afflict conventional phototherapy and pharmacotherapy. Despite great therapeutic potential, exact mechanisms, materials, and fabrication designs to optimize this promising treatment option are underexplored. This review outlines principles and applications of phototherapy and optical waveguides for infection control. Research advances, challenges, and outlook regarding this delivery system are rigorously discussed in a hope to inspire future developments of optical waveguide-mediated phototherapy for the management of infection and beyond.

Butyric and Citric Acids and Their Salts in Poultry Nutrition: Effects on Gut Health and Intestinal Microbiota

Intestinal dysfunction of farm animals, such as intestinal inflammation and altered gut microbiota, is the critical problem affecting animal welfare, performance and farm profitability. China has prohibited the use of antibiotics to improve feed efficiency and growth performance for farm animals, including poultry, in 2020. With the advantages of maintaining gut homeostasis, enhancing digestion, and absorption and modulating gut microbiota, organic acids are regarded as promising antibiotic alternatives. Butyric and citric acids as presentative organic acids positively impact growth performance, welfare, and intestinal health of livestock mainly by reducing pathogenic bacteria and maintaining the gastrointestinal tract (GIT) pH. This review summarizes the discovery of butyric acid (BA), citric acid (CA) and their salt forms, molecular structure and properties, metabolism, biological functions and their applications in poultry nutrition. The research findings about BA, CA and their salts on rats, pigs and humans are also briefly reviewed. Therefore, this review will fill the knowledge gaps of the scientific community and may be of great interest for poultry nutritionists, researchers and feed manufacturers about these two weak organic acids and their effects on intestinal health and gut microbiota community, with the hope of providing safe, healthy and nutrient-rich poultry products to consumers.

Biodegradable Materials for Sustainable Health Monitoring Devices

The recent advent of biodegradable materials has offered huge opportunity to transform healthcare technologies by enabling sensors that degrade naturally after use. The implantable electronic systems made from such materials eliminate the need for extraction or reoperation, minimize chronic inflammatory responses, and hence offer attractive propositions for future biomedical technology. The eco-friendly sensor systems developed from degradable materials could also help mitigate some of the major environmental issues by reducing the volume of electronic or medical waste produced and, in turn, the carbon footprint. With this background, herein we present a comprehensive overview of the structural and functional biodegradable materials that have been used for various biodegradable or bioresorbable electronic devices. The discussion focuses on the dissolution rates and degradation mechanisms of materials such as natural and synthetic polymers, organic or inorganic semiconductors, and hydrolyzable metals. The recent trend and examples of biodegradable or bioresorbable materials-based sensors for body monitoring, diagnostic, and medical therapeutic applications are also presented. Lastly, key technological challenges are discussed for clinical application of biodegradable sensors, particularly for implantable devices with wireless data and power transfer. Promising perspectives for the advancement of future generation of biodegradable sensor systems are also presented.

Antimicrobial hydroxyapatite and its composites for the repair of infected femoral condyle

Orthopedic implant-associated infection constitutes one of the most devastating and challenging symptoms in the clinic. Implants without antimicrobial properties may become the harbourage for microbial colonization and biofilm formation, thus hindering normal bone regeneration processes. We had previously developed tannin modified HA (THA) as well as silver and tannin modified hydroxyapatite (HA) (Ag-THA) via a facile one-step and scalable process, and proven their antimicrobial performance in vitro. Herein, by compositing with non-antimicrobial polyurethane (PU), the in vivo anti-bacterial activity, osteoconductivity and osteoinductivity of PU/Ag-THA composite were investigated using an infected femoral condyle defect model on rat. PU/Ag-THA exhibited excellent in vivo antimicrobial activity, with the calculated bacteria fraction being reduced to lower than 3% at week 12 post operation. Meanwhile, PU/Ag-THA is also promising for bone regeneration under the bacteria challenge, evidenced by a final bone mineral density (BMD) ~0.6 times higher than that of the blank control at week 12. A continuous increase in BMD over time was observed in the PU/Ag-THA group, but not in the blank control and its non- or weak-antimicrobial counterparts (PU/HA and PU/THA), in which the growth rate of BMD declined after 8 weeks of operation. The enhanced osteoinductivity of PU/Ag-THA relative to blank control, PU/HA and PU/THA was also confirmed by the Runt-related transcription factor 2 (RUNX2) and osteocalcin (OCN) immunohistochemical staining. The above findings suggest that antimicrobial Ag-THA may serve as a promising and easy-to-produce antimicrobial mineral for the development of antimicrobial orthopedic composite implants to address the challenges in orthopedic surgeries, especially where infection may become a challenging condition to treat.

In-Situ Investigation on Nanoscopic Biomechanics of Streptococcus mutans at Low pH Citric Acid Environments Using an AFM Fluid Cell

Streptococcus mutans (S. mutans) is widely regarded as the main cause of human dental caries via three main virulence factors: adhesion, acidogenicity, and aciduricity. Citric acid is one of the antibiotic agents that can inhibit the virulence capabilities of S. mutans. A full understanding of the acidic resistance mechanisms (ARMs) causing bacteria to thrive in citrate transport is still elusive. We propose atomic force microscopy (AFM) equipped with a fluid cell to study the S. mutans ARMs via surface nanomechanical properties at citric acid pH 3.3, 2.3, and 1.8. Among these treatments, at pH 1.8, the effect of the citric acid shock in cells is demonstrated through a significantly low number of high adhesion zones, and a noticeable reduction in adhesion forces. Consequently, this study paves the way to understand that S. mutans ARMs are associated with the variation of the number of adhesion zones on the cell surface, which is influenced by citrate and proton transport. The results are expected to be useful in developing antibiotics or drugs involving citric acid for dental plaque treatment.

A Review of Bioresorbable Implantable Medical Devices: Materials, Fabrication, and Implementation

Implantable medical devices (IMDs) are designed to sense specific parameters or stimulate organs and have been actively used for treatment and diagnosis of various diseases. IMDs are used for long-term disease screening or treatments and cannot be considered for short-term applications since patients need to go through a surgery for retrieval of the IMD. Advances in bioresorbable materials has led to the development of transient IMDs that can be resorbed by bodily fluids and disappear after a certain period. These devices are designed to be implanted in the adjacent of the targeted tissue for predetermined times with the aim of measurement of pressure, strain, or temperature, while the bioelectronic devices stimulate certain tissues. They enable opportunities for monitoring and treatment of acute diseases. To realize such transient and miniaturized devices, researchers utilize a variety of materials, novel fabrication methods, and device design strategies. This review discusses potential bioresorbable materials for each component in an IMD followed by programmable degradation and safety standards. Then, common fabrication methods for bioresorbable materials are introduced, along with challenges. The final section provides representative examples of bioresorbable IMDs for various applications with an emphasis on materials, device functionality, and fabrication methods.

Bioresorbable Materials on the Rise: From Electronic Components and Physical Sensors to In Vivo Monitoring Systems

Over the last decade, scientists have dreamed about the development of a bioresorbable technology that exploits a new class of electrical, optical, and sensing components able to operate in physiological conditions for a prescribed time and then disappear, being made of materials that fully dissolve in vivo with biologically benign byproducts upon external stimulation. The final goal is to engineer these components into transient implantable systems that directly interact with organs, tissues, and biofluids in real-time, retrieve clinical parameters, and provide therapeutic actions tailored to the disease and patient clinical evolution, and then biodegrade without the need for device-retrieving surgery that may cause tissue lesion or infection. Here, the major results achieved in bioresorbable technology are critically reviewed, with a bottom-up approach that starts from a rational analysis of dissolution chemistry and kinetics, and biocompatibility of bioresorbable materials, then moves to in vivo performance and stability of electrical and optical bioresorbable components, and eventually focuses on the integration of such components into bioresorbable systems for clinically relevant applications. Finally, the technology readiness levels (TRLs) achieved for the different bioresorbable devices and systems are assessed, hence the open challenges are analyzed and future directions for advancing the technology are envisaged.

Synthesis and Properties of Bioresorbable Block Copolymers of l-Lactide, Glycolide, Butyl Succinate and Butyl Citrate

The paper presents the course of synthesis and properties of a series of block copolymers intended for biomedical applications, mainly as a material for forming scaffolds for tissue engineering. These materials were obtained in the polymerization of l-lactide and copolymerization of l-lactide with glycolide carried out using a number of macroinitiators previously obtained in the reaction of polytransesterification of succinic diester, citric triester and 1,4-butanediol. NMR, FTIR and DSC were used to characterize the materials obtained; wettability and surface free energy were assessed too. Moreover, biological tests, i.e., viability and metabolic activity of MG-63 osteoblast-like cells in contact with synthesized polymers were performed. Properties of obtained block copolymers were controlled by the composition of the polymerization mixture and by the composition of the macroinitiator. The copolymers contained active side hydroxyl groups derived from citrate units present in the polymer chain. During the polymerization of l-lactide in the presence of polyesters with butylene citrate units in the chain, obtained products of the reaction held a fraction of highly branched copolymers with ultrahigh molecular weight. The reason for this observed phenomenon was strong intermolecular transesterification directed to lactidyl side chains, formed as a result of chain growth on hydroxyl groups related to the quaternary carbons of the citrate units. Based on the physicochemical properties and results of biological tests it was found that the most promising materials for scaffolds formation were poly(l-lactide–co–glycolide)–block–poly(butylene succinate–co–butylene citrate)s, especially those copolymers containing more than 60 mol % of lactidyl units.

Citric Acid Tunes the Formation of Antimicrobial Melanin-Like Nanostructures

Nature has provided a valuable source of inspiration for developing high performance multifunctional materials. Particularly, catechol-containing amino acid l-3,4-dihydroxyphenylalanine (l-DOPA) has aroused the interest to design hybrid multifunctional materials with superior adhesive ability. DOPA oxidative polymerization mediated by either melanogenic enzymes or an alkaline environment involving catechol intermolecular cross-linking, ultimately leads to melanin oligomers. Recently, relevant studies disclosed the ability of Ti-based nanostructures to tune melanin's supramolecular structure during its formation, starting from melanogenic precursors, thus improving both antioxidant and antimicrobial properties. In this work, we propose a novel biomimetic approach to design hybrid DOPA melanin-like nanostructures through a hydrothermal synthesis opportunely modified by using citric acid to control hydrolysis and condensation reactions of titanium alkoxide precursors. UV-Vis and Electron paramagnetic resonance (EPR) spectroscopic evidences highlighted the key role of citrate-Ti(IV) and DOPA-Ti(IV) complexes in controlling DOPA polymerization, which specifically occurred during the hydrothermal step, mediating and tuning its conversion to melanin-like oligomers. Trasmission electron microscopy (TEM) images proved the efficacy of the proposed synthesis approach in tuning the formation of nanosized globular nanostructures, with high biocide performances. The obtained findings could provide strategic guidelines to set up biomimetic processes, exploiting the catechol-metal complex to obtain hybrid melanin-like nanosystems with optimized multifunctional behavior.

Production, Utilization and Nutritional benefits of Orange Fleshed Sweetpotato (OFSP) Puree Bread: A Review

Bread though an exotic food product in sub-Saharan Africa, has been an important cereal product consumed by most individuals among the vast Sub-Saharan African population. Bread formulations in both the local and industrial production have evolved. The latest and emerging technology in bread formulation involve the incorporation of orange-fleshed sweetpotato (OFSP) puree. OFSP puree-based bread is commercially available across sub-Saharan Africa (SSA) and is being promoted due to the potential nutritional benefits that it possesses. Together with OFSP flour based bread, OFSP puree based bread serves as a good food vehicle for β-carotene; this serves to alleviate vitamin A deficiency (VAD) especially among the vulnerable population in SSA. The production of OFSP puree based bread has so far been relying on fresh OFSP puree or cold-chain stored OFSP puree. However, this has presented economic challenges and problems to the sustainability and expansion in OFSP puree bread production. Cold chain stored OFSP puree is capital intensive and has inconsistent supply. With the development of shelf-storable preservative treated OFSP puree, most of these challenges will be overcome without undoing the currently harnessed benefits. The use of OFSP puree in bread baking can then be expanded easily at minimal production costs and maximum retention of nutritional quality. Therefore, the use of the shelf-storable OFSP puree in bread baking needs to be evaluated further to present a substantiated case for its use. The current review has been developed with focus on the scientific advances in the production of OFSP puree based bread from both historical and a forecast perspective. The scientific progress and breakthroughs in the use of OFSP puree in bread are critically reviewed.

Thermo-chemical modification of a natural biomembrane to induce mucoadhesion, pH sensitivity and anisotropic mechanical properties

In the present study due to the distinctive mechanochemical/biological characteristics of natural biomembranes, we state the preparation, characterization and cytocompatibility of modified eggshell membrane (ESM) by citric acid (CA) for biomedical and pharmaceutical applications. FTIR spectroscopy and CHNS analysis demonstrated the successful reaction of ESM with CA. Also, successful modification of the ESM was observed by the change in thermogravimetric analysis. SEM micrographs of neat ESM and ESM-CA gave further insight into membranes morphology and revealed that aligned oriented fibrous frameworks were prepared using thermo-chemical process. The ESM-CA displayed dense and orderly shapes with tailorable architectures to mimic the intended tissue. Moreover, mechanical analyzes for ESM-CA indicated anisotropic mechanical properties and proved that the ESM-CA could induce enhanced mucoadhesion, because of the existence of an enormous amounts of functional groups. It was found that by modification of ESM the swelling behavior was significantly changed. Indomethacin release from the ESM-CA showed enhanced pH sensitivity. The modified membranes have clearly presented adequate mucoadhesion, pH sensitivity and cell viability which can be tailored for potential use in controlled lipophilic drug delivery systems and tissue engineering.

Citrate chemistry and biology for biomaterials design

Leveraging the multifunctional nature of citrate in chemistry and inspired by its important role in biological tissues, a class of highly versatile and functional citrate-based materials (CBBs) has been developed via facile and cost-effective polycondensation. CBBs exhibiting tunable mechanical properties and degradation rates, together with excellent biocompatibility and processability, have been successfully applied in vitro and in vivo for applications ranging from soft to hard tissue regeneration, as well as for nanomedicine designs. We summarize in the review, chemistry considerations for CBBs design to tune polymer properties and to introduce functionality with a focus on the most recent advances, biological functions of citrate in native tissues with the new notion of degradation products as cell modulator highlighted, and the applications of CBBs in wound healing, nanomedicine, orthopedic, cardiovascular, nerve and bladder tissue engineering. Given the expansive evidence for citrate's potential in biology and biomaterial science outlined in this review, it is expected that citrate based materials will continue to play an important role in regenerative engineering.

Development of tannin-inspired antimicrobial bioadhesives

Tissue adhesives play an important role in surgery to close wounds, seal tissues, and stop bleeding, but existing adhesives are costly, cytotoxic, or bond weakly to tissue. Inspired by the water-resistant adhesion of plant-derived tannins, we herein report a new family of bioadhesives derived from a facile, one-step Michael addition of tannic acid and gelatin under oxidizing conditions and crosslinked by silver nitrate. The oxidized polyphenol groups of tannic acid enable wet tissue adhesion through catecholamine-like chemistry, while both tannic acid and silver nanoparticles reduced from silver nitrate provide antimicrobial sources inherent within the polymeric network. These tannin-inspired gelatin bioadhesives are low-cost and readily scalable and eliminate the concerns of potential neurological effect brought by mussel-inspired strategy due to the inclusion of dopamine; variations in gelatin source (fish, bovine, or porcine) and tannic acid feeding ratios resulted in tunable gelation times (36 s-8 min), controllable degradation (up to 100% degradation within a month), considerable wet tissue adhesion strengths (up to 3.7 times to that of fibrin glue), excellent cytocompatibility, as well as antibacterial and antifungal properties. The innate properties of tannic acid as a natural phenolic crosslinker, molecular glue, and antimicrobial agent warrant a unique and significant approach to bioadhesive design.

STATEMENT OF SIGNIFICANCE

This manuscript describes the development of a new family of tannin-inspired antimicrobial bioadhesives derived from a facile, one-step Michael addition of tannic acid and gelatin under oxidizing conditions and crosslinked by silver nitrate. Our strategy is new and can be easily extended to other polymer systems, low-cost and readily scalable, and eliminate the concerns of potential neurological effect brought by mussel-inspired strategy due to the inclusion of dopamine. The tannin-inspired gelatin bioadhesives hold great promise for a number of applications in wound closure, tissue sealant, hemostasis, antimicrobial and cell/drug delivery, and would be interested to the readers from biomaterials, tissue engineering, and drug delivery area.

Click chemistry improved wet adhesion strength of mussel-inspired citrate-based antimicrobial bioadhesives

For the first time, a convenient copper-catalyzed azide-alkyne cycloaddition (CuAAC, click chemistry) was successfully introduced into injectable citrate-based mussel-inspired bioadhesives (iCMBAs, iCs) to improve both cohesive and wet adhesive strengths and elongate the degradation time, providing numerous advantages in surgical applications. The major challenge in developing such adhesives was the mutual inhibition effect between the oxidant used for crosslinking catechol groups and the Cu(II) reductant used for CuAAC, which was successfully minimized by adding a biocompatible buffering agent typically used in cell culture, 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES), as a copper chelating agent. Among the investigated formulations, the highest adhesion strength achieved (223.11 ± 15.94 kPa) was around 13 times higher than that of a commercially available fibrin glue (15.4 ± 2.8 kPa). In addition, dual-crosslinked (i.e. click crosslinking and mussel-inspired crosslinking) iCMBAs still preserved considerable antibacterial and antifungal capabilities that are beneficial for the bioadhesives used as hemostatic adhesives or sealants for wound management.

Recent Advances in Antimicrobial Polymers: A Mini-Review

Human safety and well-being is threatened by microbes causing numerous infectious diseases resulting in a large number of deaths every year. Despite substantial progress in antimicrobial drugs, many infectious diseases remain difficult to treat. Antimicrobial polymers offer a promising antimicrobial strategy for fighting pathogens and have received considerable attention in both academic and industrial research. This mini-review presents the advances made in antimicrobial polymers since 2013. Antimicrobial mechanisms exhibiting either passive or active action and polymer material types containing bound or leaching antimicrobials are introduced. This article also addresses the applications of these antimicrobial polymers in the medical, food, and textile industries.

Synthesis and characterization of anti-bacterial and anti-fungal citrate-based mussel-inspired bioadhesives

Bacterial and fungal infections in the use of surgical devices and medical implants remain a major concern. Traditional bioadhesives fail to incorporate anti-microbial properties, necessitating additional anti-microbial drug injection. Herein, by the introduction of the clinically used and inexpensive anti-fungal agent, 10-undecylenic acid (UA), into our recently developed injectable citrate-based mussel-inspired bioadhesives (iCMBAs), a new family of anti-bacterial and anti-fungal iCMBAs (AbAf iCs) was developed. AbAf iCs not only showed strong wet tissue adhesion strength, but also exhibited excellent in vitro cyto-compatibility, fast degradation, and strong initial and considerable long-term anti-bacterial and anti-fungal ability. For the first time, the biocompatibility and anti-microbial ability of sodium metaperiodate (PI), an oxidant used as a cross-linking initiator in the AbAf iCs system, was also thoroughly investigated. Our results suggest that the PI-based bioadhesives showed better anti-microbial properties compared to the unstable silver-based bioadhesive materials. In conclusion, AbAf iCs family can serve as excellent anti-bacterial and anti-fungal bioadhesive candidates for tissue/wound closure, wound dressing, and bone regeneration, especially when bacterial or fungal infections are a major concern.

Design of antimicrobial peptides conjugated biodegradable citric acid derived hydrogels for wound healing

Wound healing is usually facilitated by the use of a wound dressing that can be easily applied to cover the wound bed, maintain moisture, and avoid bacterial infection. In order to meet all of these requirements, we developed an in situ forming biodegradable hydrogel (iFBH) system composed of a newly developed combination of biodegradable poly(ethylene glycol) maleate citrate (PEGMC) and poly(ethylene glycol) diacrylate (PEGDA). The in situ forming hydrogel systems are able to conform to the wound shape in order to cover the wound completely and prevent bacterial invasion. A 2(k) factorial analysis was performed to examine the effects of polymer composition on specific properties, including the curing time, Young's modulus, swelling ratio, and degradation rate. An optimized iFBH formulation was achieved from the systematic factorial analysis. Further, in vitro biocompatibility studies using adult human dermal fibroblasts (HDFs) confirmed that the hydrogels and degradation products are not cytotoxic. The iFBH wound dressing was conjugated and functionalized with antimicrobial peptides as well. Evaluation against bacteria both in vitro and in vivo in rats demonstrated that the peptide-incorporated iFBH wound dressing offered excellent bacteria inhibition and promoted wound healing. These studies indicated that our in situ forming antimicrobial biodegradable hydrogel system is a promising candidate for wound treatment.

Citrate-Based Biomaterials and Their Applications in Regenerative Engineering

Advances in biomaterials science and engineering are crucial to translating regenerative engineering, an emerging field that aims to recreate complex tissues, into clinical practice. In this regard, citrate-based biomaterials have become an important tool owing to their versatile material and biological characteristics including unique antioxidant, antimicrobial, adhesive, and fluorescent properties. This review discusses fundamental design considerations, strategies to incorporate unique functionality, and examples of how citrate-based biomaterials can be an enabling technology for regenerative engineering.