A Fluorescent Aptasensor Based on Assembled G-Quadruplex and Thioflavin T for the Detection of Biomarker VEGF165

Plasmonic colorimetry and G-quadruplex fluorescence-based aptasensor: A dual-mode, protein-free and label-free detection for OTA

G-quadruplexes (G4) have received significant attention in the field of aptasensors owing to their unique physicochemical characteristics. A dual-mode, protein-free and label-free aptamer sensor based on plasmonic colorimetry and G4 fluorescence (PC@GF-aptasensor) was proposed for ochratoxin A (OTA). Colorimetry mode was achieved through the surface plasmon resonance (SPR) effect, which related to the OTA-Apt-based G4-OTA. The fluorescence mode was reflected by the insertion of thioflavin T (ThT) into G4-OTA. The OTA could be interpreted via three readouts: (1) naked eye (LOD of 2.0 ng mL-1), (2) smartphone (LOD of 1.65 ng mL-1), and (3) spectrofluorometer (LOD of 0.93 ng mL-1). The PC@GF-aptasensor exhibited several advantages, such as a standardised recognition group, simplified operation, low background signal, and practicality. The proposed PC@GF-aptasensor integrated SPR-based multicolour interpretation and ThT-inserted fluorescence reflection to obtain a dual-mode optical biosensor, which may provide valuable insights for the development of other targets with G4-based aptamers.

Lantern-type G-quadruplex fluorescent sensors for detecting divalent metal ions

Three thioflavin T (ThT) derivatives, namely ThT/ethylenediaminetetraacetic acid conjugates (E1T, E2T, and E1T1P), were designed and synthesized as sensing components for divalent metal ion detection. Furthermore, these ThT derivatives were used to design lantern-type G-quadruplex (G4) fluorescent sensors. The fluorescence intensities of the ThT derivatives decreased by 1.2- to 5.6-folds in the presence of Ni2+ and Cu2+, respectively, regardless of the topology of the utilized G4. Conversely, when Mn2+ and Zn2+ coexisted in antiparallel G4, the fluorescence intensities of E2T increased to approximately 3.3- and 2.3-folds, respectively, depending on the concentration of the divalent metal ion, allowing for quantitative analyses. The Job plot analysis revealed that the binding ratio of G4 and E2T changed from 2:1 to 1:2 with the increasing concentration of the divalent metal ions. These results indicated that the basic principle of such a lantern-type G4 sensor can be applied to the detection of divalent metal ions and other types of targets, such as proteins, and small molecules via ThT derivatization.

Microfluidic chip immunoassay based on rolling circle amplification and G-quadruplex/Thioflavin T for multiplex detection of CTX I

A label-free immunoassay based on rolling circle amplification (RCA) and G-quadruplex/Thioflavin T (G4/ThT) is proposed to realize the sensitive detection of carboxy-terminal cross-linked fragment of type I collagen (CTX I) for bone loss. Under the optimal conditions, as low as 38.02 pg/mL of CTX I can be detected. To improve the detecting throughput and simplify the operation, a microfluidic chip was designed, fabricated, and used for CTX I detection based on the proposed assay. The detection can be completed with only a single on-chip magnetic separation step, which was easy to operate, less time-consuming, and has only low reagent consumption. The limit of detection was 131.83 pg/mL by observing with fluorescence microscope. With further improvement of detection equipment, the sensitivity of on-chip detection can be improved. It can be expected that the proposed RCA/G4/ThT immunoassay for sensitive and high-throughput automated detection of CTX I might be chosen as a potential analytical tool for clinical osteoporosis diagnosis and in-orbit bone loss detection.

PCR-Free, Label-Free, and Centrifugation-Free Diagnosis of Multiplex Antibiotic Resistance Genes by Combining mDNA-Au@Fe3O4 from Heating Dry and DNA Concatamers with G-Triplex

Accurate identification of antibiotic resistance genes (ARGs) is crucial for improving treatment and controlling the spread of antibiotic-resistant bacteria (ARB). Herein, a novel PCR-free, centrifugation-free, and label-free magnetic fluorescent biosensor (MFB) was developed by combining polyA-medium DNA-polyT (mDNA, which contained a partial sequence of a target DNA), gold nanoparticle (AuNP)-anchored magnetic nanoparticle (Au@Fe3O4), complementary strand DNA (CS) of the target DNA, DNA concatamer with G-triplex (G3), and thioflavin T (ThT). Thereinto, Au@Fe3O4 nanoparticles were first capped by mDNA strands within 20 min using a simple hot drying method, and then CS was added and hybridized with mDNA on Au@Fe3O4. Second, a DNA concatamer was used to bind with CS on Au@Fe3O4. When an ARG was present in the sample, the CS would recognize it and release the DNA concatamer into solution by a toehold-mediated strand displacement reaction. Finally, under magnetic separation, the free DNA concatamers with G3 were taken out easily and bound with ThT, resulting in strong fluorescence signals. The fluorescence intensity of ThT was positively correlated with the concentration of the ARG. The whole analysis was accomplished within 1.5 h using 96-well plates. Remarkably, our MFB was universal; eight ARGs were detected by replacing the corresponding mDNA and CS in this study. To verify the practicability of our method, 12 clinically isolated strains were analyzed. The results of the MFB method were in good agreement with those of the quantitative real-time PCR method with an area under the curve of 0.92 (95% confidence interval: 0.8479 to 0.9932), sensitivity of 92.00%, and specificity of 91.55%. Above all, the MFB assay established here is simple, low-cost, and universal and has great potential for applications in the identification of ARGs.

Fluorometric detection of alpha-fetoprotein based on the use of a novel organic compound with AIE activity and aptamer-modified magnetic microparticles

BACKGROUND

Liver cancer is one of the most common cancers in the world, and it seriously threatens human life and health. Alpha-fetoprotein (AFP), as a carcinogenic glycoprotein, is an important serum marker for detecting liver cancer. Therefore, the accurate and sensitive determination of AFP is crucial for the early diagnosis and treatment of liver cancer. To this end, a label-free fluorescence aptasensor for detecting AFP based on the use of a novel organic Compound D with an aggregation-induced emission activity and aptamer-modified magnetic microparticles was constructed.

RESULTS

Compound D could combine with the complementary short chain of the aptamer (CSC-Apt) of AFP to form the D/CSC-Apt complex and realize the fluorescence enhancement of Compound D. Then, magnetic particles modified by the Apt of AFP (Apt-Fe3O4) were prepared. When AFP (or nontarget substance) and D/CSC-Apt were successively added to the Apt-Fe3O4 solution, Apt-Fe3O4 selectively bound to AFP or the D/CSC-Apt complex. Magnetic separation technology showed the changes in the fluorescence intensity of the supernatant. The research results revealed a good linear relationship between the changes in the fluorescence intensity of the supernatant and concentration of AFP within the concentration range of 10-10000 pg mL-1. The proposed aptasensor could achieve high-sensitivity and high-specificity detection of AFP, and its limit of detection was 3 pg mL-1 (S/N = 3).

SIGNIFICANCE AND NOVELTY

The sensor combines the advantages of high selectivity of Apt, high sensitivity of fluorescence analysis, AIE effect and good water solubility of Compound D, and rapid separation using magnetic separation technology. And it can be directly used for the detection of AFP in actual serum samples with high accuracy, whereas most of the methods reported in the literature can only detect AFP in spiked serum samples.

Molecular Docking Insight into the Label-Free Fluorescence Aptasensor for Ochratoxin A Detection

Ochratoxin A (OTA) is the most common mycotoxin and can be found in wheat, corn and other grain products. As OTA pollution in these grain products is gaining prominence as a global issue, the demand to develop OTA detection technology has attracted increasing attention. Recently, a variety of label-free fluorescence biosensors based on aptamer have been established. However, the binding mechanisms of some aptasensors are still unclear. Herein, a label-free fluorescent aptasensor employing Thioflavin T (ThT) as donor for OTA detection was constructed based on the G-quadruplex aptamer of the OTA aptamer itself. The key binding region of aptamer was revealed by using molecular docking technology. In the absence of the OTA target, ThT fluorescent dye binds with the OTA aptamer to form an aptamer/ThT complex, and results in the fluorescence intensity being obviously enhanced. In the presence of OTA, the OTA aptamer binds to OTA because of its high affinity and specificity to form an aptamer/OTA complex, and the ThT fluorescent dye is released from the OTA aptamer into the solution. Therefore, the fluorescence intensity is significantly decreased. Molecular docking results revealed that OTA is binding to the pocket-like structure and surrounded by the A29-T3 base pair and C4, T30, G6 and G7 of the aptamer. Meanwhile, this aptasensor shows good selectivity, sensitivity and an excellent recovery rate of the wheat flour spiked experiment.

High-Sensitive FAM Labeled Aptasensor Based on Fe3O4/Au/g-C3N4 for the Detection of Sulfamethazine in Food Matrix

In this study, we developed a fluorescent aptasensor based on Fe₃O₄/Au/g-C₃N₄ and a FAM-labeled aptamer (FAM-SMZ1S) against sulfamethazine (SMZ) for the specific and sensitive detection of SMZ in food matrix. The FAM-SMZ1S was adsorbed by the Fe₃O₄/Au/g-C₃N₄ via π–π stacking and electrostatic adsorption, serving as a basis for the ultrasensitive detection of SMZ. Molecular dynamics was used to explain the reasons why SMZ1S and SMZ were combined. This aptasensor presented sensitive recognition performance, with a limit of detection of 0.16 ng/mL and a linear range of 1–100 ng/mL. The recovery rate ranged from 91.6% to 106.8%, and the coefficient of variation (CV) ranged from 2.8% to 13.4%. In addition, we tested the aptasensor for the monitoring of SMZ in various matrix samples, and the results were well-correlated (R² ≥ 0.9153) with those obtained for HPLC detection. According to these results, the aptasensor was sensitive and accurate, representing a potentially useful tool for the detection of SMZ in food matrix.

Structured Aptamers: A Flourishing Nanomaterial for Tumor Targeting

Structured aptamers are nucleic acid systems produced using DNA nano self-assembly technology and can be constructed in a programmable manner. These aptamers are widely used in biomedical fields because of their low biological toxicity, weak immunogenicity, good cytocompatibility and biocompatibility, stability, and facile modification ability. Additionally, structured aptamers achieve nano precision in spatial configuration and can be directly internalized into targets without the assistance of transfection reagents. They exhibit higher stability, rigidity, and binding efficiency than aptamers alone. Therefore, structured aptamers have been universally applied in the tumor-targeting field and have emerged as a current research hotspot. Here, we introduce the assembly principle, assembly methods, and characterization methods of structured aptamers. Moreover, the application status of structured aptamers for tumor detection and targeted therapy is summarized to provide new research directions for early diagnosis and drug research in the field of oncology.