Humic Substances Derived From Biomass Waste During Aerobic Composting and Hydrothermal Treatment: A Review

Compost derived from olive mill cake: Effects on isohumic soil quality based on humic acids characterization

The compost effects on soil organic matter (SOM) stability were evaluated. Manure at 10 % ratio and compost at 10 %, 20 % and 40 % ratios (v/v) were added to the soil and their effects were compared to unamended control soil after 90-days of greenhouse-experiment. Humic acids (HA) and fulvic acids (FA) were extracted from two different soil-sample layers at 0-15 and 15-30 cm depth. The CHA/CFA ratio and the humification parameters were determined, and the soil-HA were characterized by spectroscopic methods (E4/E6 and FTIR). The humification parameters progress with time were affected by the amendment concentration. After 90 days, the treated soils HA' FTIR spectra showed an increase in aromatic carbon polycondensation and O-containing groups reflecting the high degrees of molecular associations and humification of soil HA. Compared to 10 % manure application and 40 % compost ratio use, the applications of 10 % and 20 % compost ratios induced higher humification level and highly oxidized HA structure. Moreover, changes in the HA compositional and functional groups were noticed at the upper layer which exhibited higher reactivity compared to the lower layer which displayed more humified SOM. Through the humification process, the HA fraction was improved to reach more stable and complex macromolecules, where aromatic structures were bio-converted into highly functionalized compounds.

Enhancing humic acids production from cornstalk under fast hydrothermal conditions: Insights into new pathways of skeleton self-polymerization and branch growth

Hydrochar, a sustainable fertilizer rich in humic substances, is made from lignocellulose through hydrothermal conversion. However, hydrothermal humification (HTH) is challenged by low yields and limited selectivity in the resulting hydrochar. This study proved humic-like acids production can be enhanced under fast non-catalytic conditions (260 ∼ 280 °C, 0 ∼ 1 h). A higher yield (by 14.1 %) and selectivity (by 40.2 %) in hydrochar of humic-like acids than conventional HTH (＜250 °C) were achieved. Meanwhile, decreased lignin derivatives, carbonyl and quinone groups, as well as increased sp2-C structures in the humic-like acids were observed. The synthesized humic-like acids exhibited a lower degree of aromatization and a higher molecular weight than commercial variants. Two pathways of humic-like acids formation of self-polymerization and the development of branched sidechains were hypothesized based on mass mitigation, carbon flow and aqueous phase compositions. This research contributes a novel approach to producing humic-like acids rich hydrochar for environmentally friendly fertilizer production.

A practical guide to the discovery of biomolecules with biostimulant activity

The growing demand for sustainable solutions in agriculture, which are critical for crop productivity and food quality in the face of climate change and the need to reduce agrochemical usage, has brought biostimulants into the spotlight as valuable tools for regenerative agriculture. With their diverse biological activities, biostimulants can contribute to crop growth, nutrient use efficiency, and abiotic stress resilience, as well as to the restoration of soil health. Biomolecules include humic substances, protein lysates, phenolics, and carbohydrates have undergone thorough investigation because of their demonstrated biostimulant activities. Here, we review the process of the discovery and development of extract-based biostimulants, and propose a practical step-by-step pipeline that starts with initial identification of biomolecules, followed by extraction and isolation, determination of bioactivity, identification of active compound(s), elucidation of mechanisms, formulation, and assessment of effectiveness. The different steps generate a roadmap that aims to expedite the transfer of interdisciplinary knowledge from laboratory-scale studies to pilot-scale production in practical scenarios that are aligned with the prevailing regulatory frameworks.

Hydrothermal carbonization of Chinese medicine residues: Formation of humic acids and combustion performance of extracted hydrochar

Aiming at the sustainable management of high-moisture Chinese medicine residues (CMR), an alternative way integrating hydrothermal carbonization (HTC), humic acids (HAs) extraction and combustion of remained hydrochar has been proposed in this study. Effect of HTC temperature, HTC duration, and feedwater pH on the mass yield and properties of HAs was examined. The associated formation mechanism of HAs during HTC was proposed. The combustion performance of remained hydrochar after HAs extraction was evaluated. Results show that the positive correlation between hydrochar yield and HAs yield is observed. According to three-dimensional excitation emission matrix (3D EEM) fluorescence intensity, the best quality of HAs is achieved with a yield of 8.17 % at feedwater pH of 13 and HTC temperature of 200 °C. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analyses show abundant aromatic and aliphatic structure as well as oxygenated functional groups in HAs, which is like commercial HAs (HA-C). Besides, in terms of comprehensive combustion index (CCI), HTC can improve the combustion performance of CMR, while it becomes a bit worse after HAs extraction. Higher weighted mean apparent activation energy (Em) of hydrochar indicating its highly thermal stability. HAs extraction reduces Em and CCI of remained hydrochar. However, it can be regarded a potential renewable energy. This work confirms a more sustainable alternative way for CMR comprehensive utilization in near future.

Direct humification of biowaste with hydrothermal technology: A review

Hydrothermal humification of biowaste, in comparison to the traditional coal-based humic acid extraction process, better aligns with the goals of carbon neutrality and sustainability. This article provided a comprehensive review on the current advancements in hydrothermal humification of biowaste. Hydrothermal humic acid (HHA) derived from different biowaste sources was compared, exhibiting significant differences in their hydrophobicity, oxygen-containing functional group content, and structural characteristics. The influence of key parameters, including reaction temperature, residence time, pH and the action of catalysts on HHA yield was analyzed. The pathways through which biowaste and its major components transform into HHA were elucidated. Coal-like hydrochar has shown significant potential for producing HHA through hydrothermal treatment, with HHA selectivity exceeding 65 %. HHA also exhibits promising performance in agriculture and environmental remediation, offering comparable value to commercial humic acid. Future research should concentrate on establishing the correlation between hydrothermal conditions and the efficiency of biowaste humification, thereby facilitating the development of a predictive model for assessing efficiency. Additionally, exploring the application value of hydrothermal-synthesized HHA with diverse chemical characteristics will guide the optimization of hydrothermal conditions and selection of suitable feedstock.

Latest development in the fabrication and use of lignin-derived humic acid

Humic substances (HS) are originated from naturally decaying biomass. The main products of HS are humic acids, fulvic acids, and humins. HS are extracted from natural origins (e.g., coals, lignite, forest, and river sediments). However, the production of HS from these resources is not environmentally friendly, potentially impacting ecological systems. Earlier theories claimed that the HS might be transformed from lignin by enzymatic or aerobic oxidation. On the other hand, lignin is a by-product of pulp and paper production processes and is available commercially. However, it is still under-utilized. To address the challenges of producing environmentally friendly HS and accommodating lignin in valorized processes, the production of lignin-derived HS has attracted attention. Currently, several chemical modification pathways can be followed to convert lignin into HS-like materials, such as alkaline aerobic oxidation, alkaline oxidative digestion, and oxidative ammonolysis of lignin. This review paper discusses the fundamental aspects of lignin transformation to HS comprehensively. The applications of natural HS and lignin-derived HS in various fields, such as soil enrichment, fertilizers, wastewater treatment, water decontamination, and medicines, were comprehensively discussed. Furthermore, the current challenges associated with the production and use of HS from lignin were described.

Cometabolic biodegradation system employed subculturing photosynthetic bacteria: A new degradation pathway of 4-chlorophenol in hypersaline wastewater

4-chlorophenol (4-CP) as a toxic persistent pollutant is quite difficult treatment by using traditional biological processes. Herein, photosynthetic bacteria (PSB) driven cometabolic biodegradation system associated with exogeneous carbon sources (e.g., sodium acetate) has been demonstrated as an effective microbial technique. The biodegradation rate (r_i) can be at 0.041 d^-1 with degradation efficiency of 93% in 3094 lx. Through the study of subculturing PSB in absence of NaCl, it was found that 50% inoculation time can be saved but keeping a similar 4-CP biodegradation efficiency in scale-up salinity system. A new plausible biodegradation pathway for 4-CP in 4th G PSB cometabolic system is proposed based on the detected cyclohexanone generation followed by ring opening. It is probably ascribed to the increasement of Firmicutes and Bacteroidetes at phyla level classified based on microbial community. This study contributes to a new insight into cometabolic technology for chlorophenol treatment in industrial hypersaline wastewater.

Walnut Shell Biowaste Valorization via HTC Process for the Removal of Some Emerging Pharmaceutical Pollutants from Aqueous Solutions

This research emphasizes the performance of some eco-friendly carbon materials as hydrochars (HC) obtained by the hydrothermal carbonization (HTC) process applied to walnut shell (WS) biowaste. These materials display promising properties that can be used for environmental applications such as emerging pharmaceutical pollutant retention from water sources. Thus, three hydrochars coded HCWS1, HCWS2, and HCWS3 were obtained using a dynamic autoclave in specific conditions—temperature of 220 °C, autogenous pressure, 1:10 biomass–water weight ratio—and for three different reaction times, 1 h, 6 h, and 12 h. The HCWSs were characterized by means of ATR-FTIR and SEM-EDS analyses and tested as possible adsorbents to assess the removal efficiencies of some emerging pharmaceutical pollutants (paracetamol and methylene blue) by UV–VIS spectrophotometry. Kinetic and adsorption studies were carried out. The best results were obtained for the HCWS3 hydrochar. Further perspectives include an activation step of the hydrochars and their testing on other emerging pharmaceutical pollutants.