Fabrication of WO3·2H2O/BC Hybrids by the Radiation Method for Enhanced Performance Supercapacitors

Enhanced Performance of WO3/SnO2 Nanocomposite Electrodes with Redox-Active Electrolytes for Supercapacitors

For effective supercapacitors, we developed a process involving chemical bath deposition, followed by electrochemical deposition and calcination, to produce WO₃/SnO₂ nanocomposite electrodes. In aqueous solutions, the hexagonal WO₃ microspheres were first chemically deposited on a carbon cloth, and then tin oxides were uniformly electrodeposited. The synthesized WO₃/SnO₂ nanocomposite was characterized by XRD, XPS, SEM, and EDX techniques. Electrochemical properties of the WO₃/SnO₂ nanocomposite were analyzed by cyclic voltammetry, galvanostatic charge-discharge tests, and electrochemical impedance spectroscopy in an aqueous solution of Na₂SO₄ with/without the redox-active electrolyte K₃Fe(CN)₆. K₃Fe(CN)₆ exhibited a synergetic effect on the electrochemical performance of the WO₃/SnO₂ nanocomposite electrode, with a specific capacitance of 640 F/g at a scan rate of 5 mV/s, while that without K₃Fe(CN)₆ was 530 F/g. The WO₃/SnO₂ nanocomposite catalyzed the redox reactions of [Fe(CN)₆]³/[Fe(CN)₆]^4- ions, and the [Fe(CN)₆]^3-/[Fe(CN)₆]^4- ions also promoted redox reactions of the WO₃/SnO₂ nanocomposite. A symmetrical configuration of the nanocomposite electrodes provided good cycling stability (coulombic efficiency of 99.6% over 2000 cycles) and satisfied both energy density (60 Whkg^-1) and power density (540 Wkg^-1) requirements. Thus, the WO₃/SnO₂ nanocomposite prepared by this simple process is a promising component for a hybrid pseudocapacitor system with a redox-flow battery mechanism.

Electrochromic and Capacitive Properties of WO3 Nanowires Prepared by One-Step Water Bath Method

In this paper, WO3 nanowires were successfully synthesized via a one-step water bath method at an appropriate temperature. The XRD (Energy Dispersive Spectrometer), SEM (Scanning electron microscope), TEM (Transmission Electron Microscope) and other characterization methods proved that the synthesized product was WO3, and the product of water bath reaction for 9 h showed the nanowires’ structure. The nanowires were evenly distributed, and the length ranged from 2 μm to 4 μm. The results showed that the nanowires had excellent light transmittance (66%), a very short response time (1.2 s, 2 s) and excellent color rendering efficiency (115.2 cm2 C−1) at 650 nm. The electrochemical performance test showed that the specific capacity of the WO3 nanowires was up to 565 F/g at 1 A/g. Change the different current densities and cycle 100 times, then return to the initial current density, accounting for 99% of the initial specific capacity of 565 F/g. We used this method for the first time to prepare tungsten oxide nanowires and investigated the bifunctional properties of the material, namely the electrochromic and capacitive properties. All of these data indicate that WO3 nanorods have excellent electrochromic and electrochromic properties and have potential market prospects in the fields of electrochromic glass, variable glasses, advertising, and supercapacitors.

Synthesis Design of Electronegativity Dependent WO3 and WO3∙0.33H2O Materials for a Better Understanding of TiO2/WO3 Composites’ Photocatalytic Activity

The design of a semiconductor or a composite semiconductor system—with applications in materials science—is complex because its morphology and structure depend on several parameters. These parameters are the precursor type, solvent, pH of the solution, synthesis approach, or shaping agents. This study gives meaningful insight regarding the synthesis design of such WO3 materials. By systematically alternating the precursor (sodium tungstate dihydrate—NWH, or ammonium tungstate hydrate—AMT), subsequently shaping the agents (halide salts—NaX, KX, or hydrohalic acids—HX; X = F−, Cl−, Br−, I−), we have obtained WO3 semiconductors by hydrothermal treatment, which in composite systems can enhance the commercial TiO2 photocatalytic activity. We investigated three sample series: WO3-NWH-NaX/WO3-NWH-KX and, subsequently, WO3-AMT-HX. The presence of W+5 centers was evidenced by Raman and X-ray photoelectron spectroscopy. W+5 and W+6 species affected the band gap values of the NaX and KX series; a higher percentage of W+5 and, subsequently, W+6 caused a redshift, while, regarding the HX series, it led to a blue shift. Increased electronegativity of the halide anions has an unfavorable effect on the composites’ photoactivity. In contrast, in the case of hydrohalic acids, it had a positive impact.

Two-Dimensional Tungsten Oxide/Selenium Nanocomposite Fabricated for Flexible Supercapacitors with Higher Operational Voltage and Their Charge Storage Mechanism

The present work elaborates the high-energy-density, stable, and flexible supercapacitor devices (full-cell configuration with asymmetric setup) based on a two-dimensional tungsten oxide/selenium (2D WO₃/Se) nanocomposite. For this, the 2D WO₃/Se nanocomposite synthesized by a hydrothermal method followed by air annealing was coated on a flexible carbon cloth current collector and combined separately with both 0.1 M H₂SO₄ and 1-butyl-3-methyl imidazolium tetrafluoroborate room temperature ionic liquid (BmimBF₄ RTIL) as electrolyte. Different physicochemical characterization techniques, viz., transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy, are utilized for phase confirmation and morphology identification of the obtained samples. The electrochemical analysis was used to evaluate charge storage mechanism. The half-cell configuration (three electrode system) in 0.1 M H₂SO₄ shows a specific capacitance of 564 F g^-1 at 6 A g^-1 current density, whereas with ionic liquid as electrolyte, a higher specific capacitance of 1650 F g^-1 was obtained at a higher current of 40 mA and working potential of 4 V. Importantly, the asymmetric flexible supercapacitor device with PVA-H₂SO₄ electrolyte shows a working voltage of 1.7 V. A specific capacitance of 858 mF g^-1 is obtained for the asymmetric electrode system with an energy density of 47 mWh kg^-1 and a power density of 345 mW kg^-1 at a current density of 0.2 A g^-1.