Structural Changes in Polymeric Gel Scaffolds Around the Overlap Concentration

Characterizing rheological properties and microstructure of thioester networks during degradation

Covalent adaptable networks are designed for applications including cell and drug delivery and tissue regeneration. These applications require network degradation at physiological conditions and on a physiological timescale with microstructures that can: (1) support, protect and deliver encapsulated cells or molecules and (2) provide structure to surrounding tissue. Due to this, the evolving microstructure and rheological properties during scaffold degradation must be characterized. In this work, we characterize degradation of covalent adaptable poly(ethylene glycol) (PEG)-thioester networks with different amounts of excess thiol. Networks are formed between PEG-thiol and PEG-thioester norbornene using photopolymerization. These networks are adaptable because of a thioester exchange reaction that takes place in the presence of excess thiol. We measure degradation of PEG-thioester networks with L-cysteine using multiple particle tracking microrheology (MPT). MPT measures the Brownian motion of fluorescent probe particles embedded in a material and relates this motion to rheological properties. Using time-cure superposition (TCS), we characterize the microstructure of these networks at the gel-sol phase transition by calculating the critical relaxation exponent, n, for each network with different amounts of excess thiol. Based on the measured n values, networks formed with 0% and 50% excess thiol are tightly cross-linked and elastic in nature. While networks formed with 100% excess are similar to ideal, percolated networks, which have equal viscous and elastic components. MPT measurements during degradation of these networks also measure a non-monotonic increase in probe motility. We hypothesize that this is network rearrangement near the phase transition. We then measure macroscopic material properties including the equilibrium modulus and stress relaxation. We measure a trend in bulk network properties that agrees with the values of n. Elastic modulus and stress relaxation measurements show that networks with 50% excess thiol are more elastic compared to the other two networks. As the amount of excess thiol is increased from 0% to 50%, the networks become more elastic. Further increasing excess thiol to 100% reduces the elastically effective cross-links. We hypothesize that these properties are due to network non-idealities, resulting in networks with 50% excess thiol that are more elastic. This work characterizes dynamic rheological properties during degradation, which mimics processes that could occur during implantation. This work provides information that can be used in the future design of implantable materials enabling both the rheological properties and timescale of degradation to be specified.

Temperature responsive crosslinked starch-kraft lignin macromolecule

Starch is a natural polymer with a relatively simple structure and limited solubility in water. Kraft lignin (KL) is a complex biopolymer obtained as a by-product from the delignification of wood and grasses. The present work reports developing a temperature-responsive high molecular weight macromolecule from crosslinking KL and starch (KLS). The NMR and XPS analyses quantified the changes in the aromatic and anhydroglucose units of KL and starch, observing a higher content of C-O-C bonds, which confirms the presence of glycerol ether cross-linkages between starch and KL in KLS. The rheological analysis of KLS dispersions revealed the formation of a thermo-responsive structured network. The temperature-dependent water solubility and rheological characteristics of KLS were related to the presence of hydrophilic starch chains, crosslinking degree, and physicochemical characteristics of KL. The incorporation of KL and ether crosslinks increased the thermal stability of KLS. Because of its multiple functional groups and large molecular weight (3.6-4.2 × 10⁵ g/mol) that was arranged in an extended globular shape, KLS-5 formed a gel-like structure after a heating-cooling treatment. Overall, the results confirmed that incorporating lignin in starch would fabricate sustainable materials with potentially altered applications, such as temperature-responsive hydrogels and films.

Microfluidic techniques for mechanical measurements of biological samples

The use of microfluidics to make mechanical property measurements is increasingly common. Fabrication of microfluidic devices has enabled various types of flow control and sensor integration at micrometer length scales to interrogate biological materials. For rheological measurements of biofluids, the small length scales are well suited to reach high rates, and measurements can be made on droplet-sized samples. The control of flow fields, constrictions, and external fields can be used in microfluidics to make mechanical measurements of individual bioparticle properties, often at high sampling rates for high-throughput measurements. Microfluidics also enables the measurement of bio-surfaces, such as the elasticity and permeability properties of layers of cells cultured in microfluidic devices. Recent progress on these topics is reviewed, and future directions are discussed.

Diboronate crosslinking: Introducing glucose specificity in glucose-responsive dynamic-covalent networks

Dynamic-covalent motifs are increasingly used for hydrogel crosslinking, leveraging equilibrium-governed reversible bonds to prepare viscoelastic materials with dynamic properties and self-healing character. The bonding between aryl boronates and diols is one dynamic-covalent chemistry of interest. The extent of network crosslinking using this motif may be subject to competition from ambient diols such as glucose; this approach has long been explored for glucose-directed release of insulin to control diabetes. However, the majority of such work has used phenylboronic acids (PBAs) that suffer from low-affinity glucose binding, limiting material responsiveness. Moreover, many PBA chemistries also bind with higher affinity to certain non-glucose analytes like fructose and lactate than they do to glucose, limiting their specificity of sensing and therapeutic deployment. Here, dynamic-covalent hydrogels are prepared that, for the first time, use a new diboronate motif with enhanced glucose binding-and importantly improved glucose specificity-leveraging the ability of rigid diboronates to simultaneously bind two sites on a single glucose molecule. Compared to long-used PBA-based approaches, diboronate hydrogels offer more glucose-responsive insulin release that is minimally impacted by non-glucose analytes. Improved responsiveness translates to more rapid blood glucose correction in a rodent diabetes model. Accordingly, this new dynamic-covalent crosslinking chemistry is useful in realizing more sensitive and specific glucose-responsive materials.

PEGDA hydrogel structure from semi-dilute concentrations: insights from experiments and molecular simulations

The efficacy of hydrogel materials used in biomedical applications is dependent on polymer network topology and the structure of water-laden pore space. Hydrogel microstructure can be tuned by adjusting synthesis parameters such as macromer molar mass and concentration. Moreover, hydrogels beyond dilute conditions are needed to produce mechanically robust and dense networks for tissue engineering and/or drug delivery systems. Thus, this study utilizes a combined experimental and molecular simulation approach to characterize structural features for 4.8 and 10 kDa poly (ethylene glycol) diacrylate (PEGDA) hydrogels formed from a range of semi-dilute solution concentrations. The connection between chain-chain interactions in polymer solutions, hydrogel structure, and equilibrium swelling behavior is presented. Bulk rheology analysis revealed an entanglement concentration for PEGDA pre-gel solutions around 28 wt% for both macromers studied. A similar transition in swelling behavior was revealed around the same concentration where hydrogel capacity to retain water was drastically reduced. To understand this transition, the hydrogel structure was characterized using the swollen polymer network hypothesis and compared to pore size distributions from molecular dynamics simulations. We find in both approaches a structural transition concentration at the hydrogel swelling inflection point that is comparable to the entanglement concentration. Calculated mesh sizes from theory are compared with computationally determined average maximum pore diameters; mesh sizes from theory yielded greater feature sizes across all concentrations considered. Molecular simulations are further used to assess pore dynamics, which are shown to vary in distribution shape and number of modes compared to the time-averaged hydrogel pore features. Altogether, this work provides insights into hydrogel network features and their dynamic behavior at physiological conditions (37 °C) as a basis for hydrogel design beyond dilute conditions for biomedical applications.

Measuring the Effects of Cytokines on the Modification of Pericellular Rheology by Human Mesenchymal Stem Cells

Implantable hydrogels are designed to treat wounds by providing structure and delivering additional cells to damaged tissue. These materials must consider how aspects of the native wound, including environmental chemical cues, affect and instruct delivered cells. One cell type researchers are interested in delivering are human mesenchymal stem cells (hMSCs) due to their importance in healing. Wound healing involves recruiting and coordinating a variety of cells to resolve a wound. hMSCs coordinate the cellular response and are signaled to the wound by cytokines, including transforming growth factor-β (TGF-β) and tumor necrosis factor-α (TNF-α), present in vivo. These cytokines change hMSC secretions, regulating material remodeling. TGF-β, present from inflammation through remodeling, directs hMSCs to reorganize collagen, increasing extracellular matrix (ECM) structure. TNF-α, present primarily during inflammation, cues hMSCs to clear debris and degrade ECM. Because cytokines change how hMSCs degrade their microenvironment and are naturally present in the wound, they also affect how hMSCs migrate out of the scaffold to conduct healing. Therefore, the effects of cytokines on hMSC remodeling are important when designing materials for cell delivery. In this work, we encapsulate hMSCs in a polymer-peptide hydrogel and incubate the scaffolds in media with TGF-β or TNF-α at concentrations similar to those in wounds. Multiple particle tracking microrheology (MPT) measures hMSC-mediated scaffold degradation in response to these cytokines, which mimics aspects of the in vivo microenvironment post-implantation. MPT uses video microscopy to measure Brownian motion of particles in a material, quantifying structure and rheology. Using MPT, we measure increased hMSC-mediated remodeling when cells are exposed to TNF-α and decreased remodeling after exposure to TGF-β when compared to untreated hMSCs. This agrees with previous studies that measure: (1) TNF-α encourages matrix reorganization and (2) TGF-β signals the formation of new matrix. These results enable material design that anticipates changes in remodeling after implantation, improving control over hMSC delivery and healing.

Determining How Human Mesenchymal Stem Cells Change Their Degradation Strategy in Response to Microenvironmental Stiffness

During the wound healing process, human mesenchymal stem cells (hMSCs) are recruited to the injury where they regulate inflammation and initiate healing and tissue regeneration. To aid in healing, synthetic cell-laden hydrogel scaffolds are being designed to deliver additional hMSCs to wounds to enhance or restart the healing process. These scaffolds are being designed to mimic native tissue environments, which include physical cues, such as scaffold stiffness. In this work, we focus on how the initial scaffold stiffness hMSCs are encapsulated in changes cell-mediated remodeling and degradation and motility. To do this, we encapsulate hMSCs in a well-defined synthetic hydrogel scaffold that recapitulates aspects of the native extracellular matrix (ECM). We then characterize cell-mediated degradation in the pericellular region as a function of initial microenvironmental stiffness. Our hydrogel consists of a 4-arm poly(ethylene glycol) (PEG) end-functionalized with norbornene which is chemically cross-linked with a matrix metalloproteinase (MMP) degradable peptide sequence. This peptide sequence is cleaved by hMSC-secreted MMPs. The hydrogel elastic modulus is varied from 80 to 2400 Pa by changing the concentration of the peptide cross-linker. We use multiple particle tracking microrheology (MPT) to characterize the spatiotemporal cell-mediated degradation in the pericellular region. In MPT, fluorescently labeled particles are embedded in the material, and their Brownian motion is measured. We measure an increase in cell-mediated degradation and remodeling as the post-encapsulation time increases. MPT also measures changes in the degradation profile in the pericellular region as hydrogel stiffness is increased. We hypothesize that the change in the degradation profile is due to a change in the amount and type of molecules secreted by hMSCs. We also measure a significant decrease in cell speed as hydrogel stiffness increases due to the increased physical barrier that needs to be degraded to enable motility. These measurements increase our understanding of the rheological changes in the pericellular region in different physical microenvironments which could lead to better design of implantable biomaterials for cell delivery to wounded areas.