Robust and Reproducible Agrobacterium-Mediated Transformation System of the C4 Genetic Model Species Setaria viridis

Conquering Limitations: Exploring the Factors that Drive Successful Agrobacterium-Mediated Genetic Transformation of Recalcitrant Plant Species

Agrobacterium-mediated transformation is a preferred method for genetic engineering and genome editing of plants due to its numerous advantages, although not all species exhibit transformability. Genetic engineering and plant genome editing methods are technically challenging in recalcitrant crop plants. Factors affecting the poor rate of transformation in such species include host genotype, Agrobacterium genotype, type of explant, physiological condition of the explant, vector, selectable marker, inoculation method, chemical additives, antioxidative compounds, transformation-enhancing compounds, medium formulation, optimization of culture conditions, and pre-treatments. This review provides novel insights into the key factors involved in gene transfer facilitated by Agrobacterium and proposes potential solutions to overcome existing barriers to transformation in recalcitrant species, thereby contributing to improvement programs for these species. This review introduces the key factors that impact the effectiveness of a molecular breeding program using Agrobacterium-mediated transformation, specifically focusing on recalcitrant plant species.

Assessment of Breeding Potential of Foxtail Millet Varieties Using a TOPSIS Model Constructed Based on Distinctness, Uniformity, and Stability Test Characteristics

Foxtail millet (Setaria italica) is an important cereal crop with rich nutritional value. Distinctness, Uniformity, and Stability (DUS) are the prerequisites for the application of new variety rights for foxtail millet. In this study, we investigated 32 DUS test characteristics of 183 foxtail millet resources, studied their artificial selection trends, and identified the varieties that conform to breeding trends. The results indicated significant differences in terms of the means, ranges, and coefficients of variation for each characteristic. A correlation analysis was performed to determine the correlations between various DUS characteristics. A principal component analysis was conducted on 31 test characteristics to determine their primary characteristics. By plotting PC1 and PC2, all the germplasm resources could be clearly distinguished. The trends in foxtail millet breeding were identified through a differential analysis of the DUS test characteristics between the landrace and cultivated varieties. Based on these breeding trends, the optimal solution types for multiple evaluation indicators were determined; the weight allocation was calculated; and a specific TOPSIS algorithm was designed to establish a comprehensive multi-criteria decision-making model. Using this model, the breeding potential of foxtail millet germplasm resources were ranked. These findings provided important reference for foxtail millet breeding in the future.

Kosakonia cowanii, a new bacterial pathogen affecting foxtail millet (Setaria italica[L.]P. Beauv.) in China

Foxtail millet (Setaria italica [L.] P. Beauv.) is an important cereal worldwide. From 2021 to 2022, stalk rot disease of foxtail millet was identified in Shanxi province, northern China, with an 8% and 2% field incidence rate in Xinzhou (2 different locations), respectively. It caused necrosis, decay, stem lodging, and sometimes death. This study aimed to identify the causal agent of the disease through morphophysiological and molecular identification of the isolates. Stalk rot specimens were collected in Xinzhou, from foxtail millet plants exhibiting typical symptoms, and the pathogen was isolated with dilution plating. It was cultured at 28 °C for 48 h on nutrient agar, revealing circular, convex, and pale-yellow colonies, with a smooth surface and an entire edge. Scanning electron microscopy showed that the pathogen is rod shaped, round ended and has an uneven surface ranging from 0.5 to 0.7 μm in diameter and 1.2-2.7 μm in length. It is a motile gram-negative facultative anaerobic bacterium that can reduce nitrate and synthesize catalase but cannot hydrolyze starch. It also shows a negative reaction in the methyl red test and optimum growth at 37 °C. The pathogenicity test was performed on foxtail millet variety 'Jingu 21' stem to confirm Koch's postulates. The biochemical tests were done in the Biolog Gen III MicroPlate, revealing 21 positive chemical sensitivity tests, except those for minocycline and sodium bromate. Furthermore, among 71 carbon sources, the pathogen utilized 50 as the sole carbon source, including sucrose, d-maltose, α-d-lactose, d-galactose, D-sorbitol, D-mannitol, glycerol, and inositol. Finally, molecular characterization of the pathogen using 16S rRNA and rpoB gene sequencing and subsequent phylogenetic analysis identified the strain as Kosakonia cowanii. This study is the first to report K. cowanii as a stalk rot-causing pathogen in foxtail millet.

Reasons and riddance of Agrobacterium tumefaciens overgrowth in plant transformation

Agrobacterium tumefaciens-mediated plant transformation has become routine work across the world to study gene function and the production of genetically modified plants. However, several issues hamper the transformation process in a profound way, both directly and indirectly. One of the major concerns is the overgrowth of Agrobacterium, which occasionally appears after the co-cultivation phase of the explant. This phenomenon is reported in several species and seems to spoil the whole transformation process. There are multiple approaches being employed to counter this unwanted growth of bacteria in a few plant species. In reality, once the overgrowth appears, it becomes nearly impossible to cure it. Hence, for the prevention of this phenomenon, numerous factors are regulated. These factors are: explant nature, A. tumefaciens strain, T-DNA vector, co-cultivation (time and condition), acetosyringone, washing medium, antibiotics (type, concentration, combination, incubation period), etc. In this article, we discuss these factors based on available reports. It can be of immense help in formulating viable strategies to control A. tumefaciens overgrowth.

Multi-omics intervention in Setaria to dissect climate-resilient traits: Progress and prospects

Millets constitute a significant proportion of underutilized grasses and are well known for their climate resilience as well as excellent nutritional profiles. Among millets, foxtail millet (Setaria italica) and its wild relative green foxtail (S. viridis) are collectively regarded as models for studying broad-spectrum traits, including abiotic stress tolerance, C₄ photosynthesis, biofuel, and nutritional traits. Since the genome sequence release, the crop has seen an exponential increase in omics studies to dissect agronomic, nutritional, biofuel, and climate-resilience traits. These studies have provided first-hand information on the structure, organization, evolution, and expression of several genes; however, knowledge of the precise roles of such genes and their products remains elusive. Several open-access databases have also been instituted to enable advanced scientific research on these important crops. In this context, the current review enumerates the contemporary trend of research on understanding the climate resilience and other essential traits in Setaria, the knowledge gap, and how the information could be translated for the crop improvement of related millets, biofuel crops, and cereals. Also, the review provides a roadmap for studying other underutilized crop species using Setaria as a model.

Beyond a reference genome: pangenomes and population genomics of underutilized and orphan crops for future food and nutrition security

Underutilized crops are, by definition, under-researched compared to staple crops yet come with traits that may be especially important given climate change and the need to feed a globally increasing population. These crops are often stress-tolerant, and this combined with unique and beneficial nutritional profiles. Whilst progress is being made by generating reference genome sequences, in this Tansley Review, we show how this is only the very first step. We advocate that going 'beyond a reference genome' should be a priority, as it is only at this stage one can identify the specific genes and the adaptive alleles that underpin the valuable traits. We sum up how population genomic and pangenomic approaches have led to the identification of stress- and disease-tolerant alleles in staple crops and compare this to the small number of examples from underutilized crops. We also demonstrate how previously underutilized crops have benefitted from genomic advances and that many breeding targets in underutilized crops are often well studied in staple crops. This cross-crop population-level resequencing could lead to an understanding of the genetic basis of adaptive traits in underutilized crops. This level of investment may be crucial for fully understanding the value of these crops before they are lost.

Tissue Culture and Somatic Embryogenesis in Warm-Season Grasses—Current Status and Its Applications: A Review

Warm-season grasses are C4 plants and have a high capacity for biomass productivity. These grasses are utilized in many agricultural production systems with their greatest value as feeds for livestock, bioethanol, and turf. However, many important warm-season perennial grasses multiply either by vegetative propagation or form their seeds by an asexual mode of reproduction called apomixis. Therefore, the improvement of these grasses by conventional breeding is difficult and is dependent on the availability of natural genetic variation and its manipulation through breeding and selection. Recent studies have indicated that plant tissue culture system through somatic embryogenesis complements and could further develop conventional breeding programs by micropropagation, somaclonal variation, somatic hybridization, genetic transformation, and genome editing. This review summarizes the tissue culture and somatic embryogenesis in warm-season grasses and focus on current status and above applications including the author’s progress.

Caffeic Acid, an Allelochemical in Artemisia argyi, Inhibits Weed Growth via Suppression of Mitogen-Activated Protein Kinase Signaling Pathway and the Biosynthesis of Gibberellin and Phytoalexin

Artemisia argyi is widely distributed in Asia, and it often becomes the dominant population in the field because of its strong ecological niche competitiveness. Allelochemicals secreted by plants are generally considered an important reason for their dominance in ecological competition. In this study, the allelochemicals in A. argyi were screened by a series of experiments and their mechanisms were explored via transcriptomics. First, the inhibitory effects of A. argyi on Echinochloa crusgalli, Setaria viridis, Portulaca oleracea and Amaranthus retroflexus were evaluated. Then, we carried out a qualitative and quantitative analysis of the chemical composition of the aqueous extract of A. argyi to screen for potential allelochemicals that can inhibit weed growth. Four potential allelochemicals were quantified: neochlorogenic acid (5-CQA), chlorogenic acid (3-CQA), cryptochlorogenic acid (4-CQA), and caffeic acid (CA). Coincidentally, their allelopathic effects on weeds seemed to be identical to their content, in the order CA>4-CQA>5-CQA>3-CQA. These findings suggested that CA might be the main allelopathic compound in the aqueous extract of A. argyi. Subsequently, the allelopathic effect and molecular mechanism of CA on S. viridis leaves were investigated. The physiological results showed that CA significantly induced reactive oxygen species (ROS) production, led to malondialdehyde (MDA) accumulation, and disrupted enzyme activities (POD, SOD, CAT) in S. viridis leaves. Moreover, transcriptome results revealed that CA inhibited S. viridis growth by downregulating multiple genes involved in gibberellin (GA) and phytoalexin biosynthesis and Mitogen-activated protein kinase (MAPK) signaling pathways. In addition, differentially expressed genes (DEGs) related to the biosynthesis and signaling pathways of phytohormones were verified by Quantitative Real-Time PCR (RT-qPCR). Taken together, this study may be the first to identify allelochemicals and explore their molecular mechanism about A. argyi. Importantly, the ecological advantages of A. argyi could be applied to ecological regulation and the development of botanical herbicides.

Efficient genome editing and gene knockout in Setaria viridis with CRISPR/Cas9 directed gene editing by the non-homologous end-joining pathway

The CRISPR/Cas9 system has been used for genome editing in several organisms, including higher plants. This system induces site-specific mutations in the genome based on the nucleotide sequence of engineered guide RNAs. The complex genomes of C4 grasses makes genome editing a challenge in key grass crops like maize (Zea mays), sorghum (Sorghum bicolor), Brachiaria spp., switchgrass (Panicum virgatum), and sugarcane (Saccharum spp.). Setaria viridis is a diploid C4 grass widely used as a model for these C4 crop plants. Here, an optimized CRISPR/Cas9 binary vector that exploits the non-homologous end joining (NHEJ) system was used to knockout a green fluorescent protein (gfp) transgene in S. viridis accession A10.1. Transformation of embryogenic callus by A. tumefaciens generated ten glufosinate-ammonium resistant transgenic events. In the T0 generation, 60% of the events were biallelic mutants in the gfp transgene with no detectable accumulation of GFP protein and without insertions or deletions in predicted off-target sites. The gfp mutations generated by CRISPR/Cas9 were stable and displayed Mendelian segregation in the T1 generation. Altogether, the system described here is a highly efficient genome editing system for S. viridis, an important model plant for functional genomics studies in C4 grasses. Also, this system is a potential tool for improvement of agronomic traits in C4 crop plants with complex genomes.

Developing Portulaca oleracea as a model system for functional genomics analysis of C4/CAM photosynthesis

Previously regarded as an intriguing photosynthetic curiosity, the occurrence of C4 and Crassulacean acid metabolism (CAM) photosynthesis within a single organism has recently emerged as a source of information for future biotechnological use. Among C4/CAM facultative species, Portulaca oleracea L. has been used as a model for biochemical and gene expression analysis of C4/CAM under field and laboratory conditions. In the present work, we focussed on developing molecular tools to facilitate functional genomics studies in this species, from the optimisation of RNA isolation protocols to a method for stable genetic transformation. Eleven variations of RNA extraction procedures were tested and compared for RNA quantity and quality. Also, 7 sample sets comprising total RNA from hormonal and abiotic stress treatments, distinct plant organs, leaf developmental stages, and subspecies were used to select, among 12 reference genes, the most stable reference genes for RT-qPCR analysis of each experimental condition. Furthermore, different explant sources, Agrobacterium tumefaciens strains, and regeneration and antibiotic selection media were tested in various combinations to optimise a protocol for stable genetic transformation of P. oleracea. Altogether, we provide essential tools for functional gene analysis in the context of C4/CAM photosynthesis, including an efficient RNA isolation method, preferred reference genes for RT-qPCR normalisation for a range of experimental conditions, and a protocol to produce P. oleracea stable transformants using A. tumefaciens.

Current progress and challenges in crop genetic transformation

Plant transformation remains the most sought-after technology for functional genomics and crop genetic improvement, especially for introducing specific new traits and to modify or recombine already existing traits. Along with many other agricultural technologies, the global production of genetically engineered crops has steadily grown since they were first introduced 25 years ago. Since the first transfer of DNA into plant cells using Agrobacterium tumefaciens, different transformation methods have enabled rapid advances in molecular breeding approaches to bring crop varieties with novel traits to the market that would be difficult or not possible to achieve with conventional breeding methods. Today, transformation to produce genetically engineered crops is the fastest and most widely adopted technology in agriculture. The rapidly increasing number of sequenced plant genomes and information from functional genomics data to understand gene function, together with novel gene cloning and tissue culture methods, is further accelerating crop improvement and trait development. These advances are welcome and needed to make crops more resilient to climate change and to secure their yield for feeding the increasing human population. Despite the success, transformation remains a bottleneck because many plant species and crop genotypes are recalcitrant to established tissue culture and regeneration conditions, or they show poor transformability. Improvements are possible using morphogenetic transcriptional regulators, but their broader applicability remains to be tested. Advances in genome editing techniques and direct, non-tissue culture-based transformation methods offer alternative approaches to enhance varietal development in other recalcitrant crops. Here, we review recent developments in plant transformation and regeneration, and discuss opportunities for new breeding technologies in agriculture.

Agrobacterium-Mediated Transformation of Setaria viridis, a Model System for Cereals and Bioenergy Crops

Setaria viridis is an emerging model system for the genetic and molecular characterization of cereals and bioenergy crops. Here, we describe a detailed procedure for genetic transformation of the S. viridis accession line ME034V-1. This method utilizes callus generated from mature seeds for infection with Agrobacterium tumefaciens strain AGL1 to regenerate hygromycin-resistant stable transgenic plants. It takes approximately 7 weeks to generate callus from mature seeds, 11-17 weeks from infection to the regeneration of transgenic lines, and an additional 3-4 weeks for plant growth in the greenhouse for seed collection. The protocol as presented consistently results in transformation frequency of approximately 25% for the generation of transgenic plants, with fewer escapes and higher survivability in soil for optimal seed collection. © 2021 Donald Danforth Plant Science Center. Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Generation of S. viridis (Accession ME034V-1) callus from mature seeds Basic Protocol 2: Agrobacterium-mediated transformation of callus to generate transgenic plants Basic Protocol 3: Plantlet transplantation in soil, plant growth in greenhouse, and seed collection Support Protocol: Preparation of Agrobacterium culture for infection.

Optimization of multiplexed CRISPR/Cas9 system for highly efficient genome editing in Setaria viridis

In recent years, Setaria viridis has been developed as a model plant to better understand the C4 photosynthetic pathway in major crops. With the increasing availability of genomic resources for S. viridis research, highly efficient genome editing technologies are needed to create genetic variation resources for functional genomics. Here, we developed a protoplast assay to rapidly optimize the multiplexed clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated (Cas9) system in S. viridis. Targeted mutagenesis efficiency was further improved by an average of 1.4-fold with the exonuclease, Trex2. Distinctive mutation profiles were found in the Cas9_Trex2 samples, with 94% of deletions larger than 10 bp, and essentially no insertions at all tested target sites. Further analyses indicated that 52.2% of deletions induced by Cas9_Trex2, as opposed to 3.5% by Cas9 alone, were repaired through microhomology-mediated end joining (MMEJ) rather than the canonical non-homologous end joining DNA repair pathway. Combined with a robust Agrobacterium-mediated transformation method with more than 90% efficiency, the multiplex CRISPR/Cas9_Trex2 system was demonstrated to induce targeted mutations in two tightly linked genes, svDrm1a and svDrm1b, at a frequency ranging from 73% to 100% in T0 plants. These mutations were transmitted to at least 60% of the transgene-free T1 plants, with 33% of them containing bi-allelic or homozygous mutations in both genes. This highly efficient multiplex CRISPR/Cas9_Trex2 system makes it possible to create a large mutant resource for S. viridis in a rapid and high throughput manner, and has the potential to be widely applicable in achieving more predictable and deletion-only MMEJ-mediated mutations in many plant species.

Molecular Manipulation of MicroRNA397 Abundance Influences the Development and Salt Stress Response of Arabidopsis thaliana

Arabidopsis thaliana (Arabidopsis) has been used extensively as a heterologous system for molecular manipulation to genetically characterize both dicotyledonous and monocotyledonous plant species. Here, we report on Arabidopsis transformant lines molecularly manipulated to over-accumulate the small regulatory RNA microRNA397 (miR397) from the emerging C4 monocotyledonous grass model species Setaria viridis (S. viridis). The generated transformant lines, termed SvMIR397 plants, displayed a range of developmental phenotypes that ranged from a mild, wild-type-like phenotype, to a severe, full dwarfism phenotype. Reverse transcriptase quantitative polymerase chain reaction (RT-qPCR)-based profiling of the SvMIR397 transformant population revealed a strong correlation between the degree of miR397 over-accumulation, repressed LACCASE (LAC) target gene expression, reduced lignin content, and the severity of the developmental phenotype displayed by SvMIR397 transformants. Further, exposure of SvMIR397 transformants to a 7-day regime of salt stress revealed the SvMIR397 transformant lines to be more sensitive to the imposed stress than were wild-type Arabidopsis plants. Taken together, the findings reported here via the use of Arabidopsis as a heterologous system show that the S. viridis miR397 small regulatory RNA is able to repress the expression of three Arabidopsis LAC genes which led to reduced lignin content and increased salt stress sensitivity.

Reference Genome for the Highly Transformable Setaria viridis ME034V

Setaria viridis (green foxtail) is an important model system for improving cereal crops due to its diploid genome, ease of cultivation, and use of C4 photosynthesis. The S. viridis accession ME034V is exceptionally transformable, but the lack of a sequenced genome for this accession has limited its utility. We present a 397 Mb highly contiguous de novo assembly of ME034V using ultra-long nanopore sequencing technology (read N50 = 41kb). We estimate that this genome is largely complete based on our updated k-mer based genome size estimate of 401 Mb for S. viridis Genome annotation identified 37,908 protein-coding genes and >300k repetitive elements comprising 46% of the genome. We compared the ME034V assembly with two other previously sequenced Setaria genomes as well as to a diversity panel of 235 S. viridis accessions. We found the genome assemblies to be largely syntenic, but numerous unique polymorphic structural variants were discovered. Several ME034V deletions may be associated with recent retrotransposition of copia and gypsy LTR repeat families, as evidenced by their low genotype frequencies in the sampled population. Lastly, we performed a phylogenomic analysis to identify gene families that have expanded in Setaria, including those involved in specialized metabolism and plant defense response. The high continuity of the ME034V genome assembly validates the utility of ultra-long DNA sequencing to improve genetic resources for emerging model organisms. Structural variation present in Setaria illustrates the importance of obtaining the proper genome reference for genetic experiments. Thus, we anticipate that the ME034V genome will be of significant utility for the Setaria research community.