The Pathobiology of the Meniscus: A Comparison Between the Human and Dog

An experimental study of the heterogeneity and anisotropy of porcine meniscal ultimate tensile strength

Characterizing the ultimate tensile strength (UTS) of the meniscus is critical in studying knee damage and pathology. This study aims to determine the UTS of the meniscus with an emphasis on its heterogeneity and anisotropy. We performed tensile tests to failure on the menisci of six month old Yorkshire pigs at a low strain rate. Specimens from the anterior, middle and posterior regions of the meniscus were tested in the radial and circumferential directions. Then the UTS was obtained for each specimen and the data were analyzed statistically, leading to a comprehensive view of the variations in porcine meniscal strength. The middle region has the highest average strength in the circumferential (43.3 ± 4.7 MPa) and radial (12.6 ± 2.2 MPa) directions. This is followed by the anterior and posterior regions, which present similar average values (about 34.0MPa) in circumferential direction. The average strength of each region in the radial direction is approximately one-fourth to one-third of the value in the circumferential direction. This study is novel as it is the first work to focus on the experimental methods to investigate the heterogeneity and anisotropy only for porcine meniscus.

Recent advances in 3D bioprinted cartilage-mimicking constructs for applications in tissue engineering

Human cartilage tissue can be categorized into three types: hyaline cartilage, elastic cartilage and fibrocartilage. Each type of cartilage tissue possesses unique properties and functions, which presents a significant challenge for the regeneration and repair of damaged tissue. Bionics is a discipline in which humans study and imitate nature. A bionic strategy based on comprehensive knowledge of the anatomy and histology of human cartilage is expected to contribute to fundamental study of core elements of tissue repair. Moreover, as a novel tissue-engineered technology, 3D bioprinting has the distinctive advantage of the rapid and precise construction of targeted models. Thus, by selecting suitable materials, cells and cytokines, and by leveraging advanced printing technology and bionic concepts, it becomes possible to simultaneously realize multiple beneficial properties and achieve improved tissue repair. This article provides an overview of key elements involved in the combination of 3D bioprinting and bionic strategies, with a particular focus on recent advances in mimicking different types of cartilage tissue.

Associations between meniscal tears and various degrees of osteoarthritis among dogs undergoing TPLO for cranial cruciate ligament rupture

OBJECTIVE

The aim of this study was to evaluate the association between meniscal lesions and severity of osteoarthritis (OA) among dogs that underwent Tibial Plateau Leveling Osteotomy (TPLO) for stabilization of cranial cruciate ligament rupture (CrCLR) at the University of Tennessee in 2011-2017.

RESULTS

There were a total of 252 meniscal tears. Factors associated with diagnosis of medial meniscal tears (MMT) in dogs were severe OA in comparison to no OA (3.8 OR, 2.0-8.0 95% CI, 0.001 p-value), sporting and mixed breed group compared to other breed (3.6 OR, 1.7-7.6 95% CI, 0.004 p-value; 3.2 OR, 1.6-6.6 95% CI, 0.019 p-value, respectively), increasing age (1.1 OR, 1.0-1.2 95% CI, 0.018 p-value), complete CrCLR compared to partial (3.3 OR, 2.1-5.0 95% CI, < 0.001 p-value), and arthrotomy compared to arthroscopy (2.2 OR, 1.4-3.1 95% CI, 0.002 p-value). The factors that did not have significance in predicting MMT were weight, sex, lameness period, and side affected.

Comparison of Digital Radiography, Computed Tomography, and Magnetic Resonance Imaging Features in Canine Spontaneous Degenerative Stifle Joint Osteoarthritis

Canine stifle joint osteoarthritis (OA) is characterized by damage and degeneration of the articular cartilage and subchondral bone, bony hypertrophy at the margins, and synovial joint membrane changes. Non-invasive imaging modalities, such as digital radiography (DR), computed tomography (CT), and magnetic resonance imaging (MRI), can be used to describe these changes. However, the value of MRI in diagnosing spontaneous canine OA and the comparison of different imaging modalities have seldom been addressed. This study compared multiple noninvasive imaging modalities in canine spontaneous stifle OA cases. Four client-owned dogs with five spontaneously affected OA stifle joints were recruited and underwent DR, CT, and MRI. Information on osteophytes/enthesophytes, ligament/tendon lesions, synovial effusion and membrane thickening, subchondral bone lesions, and meniscal and cartilage lesions were scored and compared. The results showed that MRI provides the most comprehensive and superior lesion detection sensitivity for ligament, meniscus, cartilage, and synovial effusions. DR provides adequate bony structure information, while CT provides the most delicate images of bony structure lesions. These imaging findings may provide further understanding of the disease and help clinicians draft a more precise treatment plan.

Targeted transcriptomic analyses of RNA isolated from formalin-fixed and paraffin-embedded human menisci

Formalin-fixed and paraffin-embedded (FFPE) biospecimens are a valuable and widely-available resource for diagnostic and research applications. With biobanks of tissue samples available in many institutions, FFPE tissues could prove to be a valuable resource for translational orthopaedic research. The purpose of this study was to characterize the molecular profiles and degree of histologic degeneration on archival fragments of FFPE human menisci obtained during arthroscopic partial meniscectomy. We used FFPE menisci for multiplexed gene expression analysis using the NanoString nCounter® platform, and for histological assessment using a quantitative scoring system. In total, 17 archival specimens were utilized for integrated histologic and molecular analyses. The median patient age was 22 years (range: 14-62). We found that the genes with the highest normalized counts were those typically expressed in meniscal fibrocartilage. Gene expression differences were identified in patient cohorts based on age (≤40 years), including genes associated with the extracellular matrix and tissue repair. The majority of samples showed mild to moderate histologic degeneration. Based on these data, we conclude that FFPE human menisci can be effectively utilized for molecular evaluation following a storage time as long as 11 years. Statement of Clinical Significance: The integration of histological and transcriptomic analyses described in this study will be useful for future studies investigating the basis for biological classification of meniscus specimens in patients. Further exploration into the genes and pathways uncovered by this study may suggest targets for biomarker discovery and identify patients at greater risk for osteoarthritis once the meniscus is torn.

Meniscus regeneration by 3D printing technologies: Current advances and future perspectives

Meniscal tears are a frequent orthopedic injury commonly managed by conservative strategies to avoid osteoarthritis development descending from altered biomechanics. Among cutting-edge approaches in tissue engineering, 3D printing technologies are extremely promising guaranteeing for complex biomimetic architectures mimicking native tissues. Considering the anisotropic characteristics of the menisci, and the ability of printing over structural control, it descends the intriguing potential of such vanguard techniques to meet individual joints’ requirements within personalized medicine. This literature review provides a state-of-the-art on 3D printing for meniscus reconstruction. Experiences in printing materials/technologies, scaffold types, augmentation strategies, cellular conditioning have been compared/discussed; outcomes of pre-clinical studies allowed for further considerations. To date, translation to clinic of 3D printed meniscal devices is still a challenge: meniscus reconstruction is once again clear expression of how the integration of different expertise (e.g., anatomy, engineering, biomaterials science, cell biology, and medicine) is required to successfully address native tissues complexities.

Erythropoietin enhances meniscal regeneration and prevents osteoarthritis formation in mice

Osteoarthritis (OA) is a leading cause of pain and disability, and knee is the most commonly afflicted joint. Meniscal tear due to injury or degeneration is an established factor for OA pathogenesis. Previous studies have demonstrated that meniscectomy does not reduce the OA incidence. We hypothesized that enhancing meniscal regeneration may prevent OA formation and progression. We first investigated the developmental pattern of mouse meniscus. Knee joint samples were collected at embryonic stages as well as after birth for histological and immunohistochemical studies. The results showed that meniscal cells underwent active proliferation and apoptosis at embryonic day 19.5 and Day 1 after birth. Collagen I (Col-1) is a major type of matrix protein in matured meniscus. Meniscal cells isolated from 3-month-old mice were used to examine the effect of selected factors on the molecules related to cell proliferation, angiogenesis, inflammation, extracellular matrix proteins and matrix degradation enzymes. Overall assessment indicated that EPO had optimal effect on meniscal regeneration. An organ culture system of mouse meniscus was established to test the effect of EPO on in vitro cultured menisci. EPO upregulated the expression of Col-1, Col-2 and VEGF-A, and downregulated the expression of MMP-13. Finally, we established a mouse model of meniscus injury induced OA (MIO), and mice were subjected to PBS or EPO treatments. The results demonstrated that EPO enhanced meniscal repair and prevented OA formation. EPO may become an effective Disease Modifying Osteoarthritis Drug and may be used for early treatment for meniscal injury to prevent OA progression.

Large Animal Models in Regenerative Medicine and Tissue Engineering: To Do or Not to Do

Rapid developments in Regenerative Medicine and Tissue Engineering has witnessed an increasing drive toward clinical translation of breakthrough technologies. However, the progression of promising preclinical data to achieve successful clinical market authorisation remains a bottleneck. One hurdle for progress to the clinic is the transition from small animal research to advanced preclinical studies in large animals to test safety and efficacy of products. Notwithstanding this, to draw meaningful and reliable conclusions from animal experiments it is critical that the species and disease model of choice is relevant to answer the research question as well as the clinical problem. Selecting the most appropriate animal model requires in-depth knowledge of specific species and breeds to ascertain the adequacy of the model and outcome measures that closely mirror the clinical situation. Traditional reductionist approaches in animal experiments, which often do not sufficiently reflect the studied disease, are still the norm and can result in a disconnect in outcomes observed between animal studies and clinical trials. To address these concerns a reconsideration in approach will be required. This should include a stepwise approach using in vitro and ex vivo experiments as well as in silico modeling to minimize the need for in vivo studies for screening and early development studies, followed by large animal models which more closely resemble human disease. Naturally occurring, or spontaneous diseases in large animals remain a largely untapped resource, and given the similarities in pathophysiology to humans they not only allow for studying new treatment strategies but also disease etiology and prevention. Naturally occurring disease models, particularly for longer lived large animal species, allow for studying disorders at an age when the disease is most prevalent. As these diseases are usually also a concern in the chosen veterinary species they would be beneficiaries of newly developed therapies. Improved awareness of the progress in animal models is mutually beneficial for animals, researchers, human and veterinary patients. In this overview we describe advantages and disadvantages of various animal models including domesticated and companion animals used in regenerative medicine and tissue engineering to provide an informed choice of disease-relevant animal models.

Meniscus Matrix Remodeling in Response to Compressive Forces in Dogs

Joint motion and postnatal stress of weight bearing are the principal factors that determine the phenotypical and architectural changes that characterize the maturation process of the meniscus. In this study, the effect of compressive forces on the meniscus will be evaluated in a litter of 12 Dobermann Pinschers, of approximately 2 months of age, euthanized as affected by the quadriceps contracture muscle syndrome of a single limb focusing on extracellular matrix remodeling and cell–extracellular matrix interaction (i.e., meniscal cells maturation, collagen fibers typology and arrangement). The affected limbs were considered as models of continuous compression while the physiologic loaded limbs were considered as controls. The results of this study suggest that a compressive continuous force, applied to the native meniscal cells, triggers an early maturation of the cellular phenotype, at the expense of the proper organization of collagen fibers. Nevertheless, an application of a compressive force could be useful in the engineering process of meniscal tissue in order to induce a faster achievement of the mature cellular phenotype and, consequently, the earlier production of the fundamental extracellular matrix (ECM), in order to improve cellular viability and adhesion of the cells within a hypothetical synthetic scaffold.