Evaluation of Spent Grain Biochar Impact on Hop (Humulus lupulus L.) Growth by Multivariate Image Analysis

Optimization of Phenolic Compound Extraction from Brewers’ Spent Grain Using Ultrasound Technologies Coupled with Response Surface Methodology

Brewers’ spent grain (BSG) is the main solid by-product from the brewery industry, rich in valuable nutrients and bioactive compounds. The aim of this study was to valorize this by-product, recovering phenolic compounds from BSG using ultrasound-assisted extraction (UAE) and chemometric techniques, such as the response surface methodology (RSM). Therefore, UAE process parameters (temperature and time) and solvent composition (ethanol aqueous mixtures) were optimized using a three-level Box–Behnken design, in order to carry out the maximum yield in phenols. Then, the extract obtained under optimal conditions was characterized for the total phenolic content and antioxidant capacity (2,20-azino-bis(3-ethylbenothiazoline-6-sulphonic acid, ABTS, and 2,2-diphenyl-1-picrylhydrazyl, DPPH), and individual phenolic compounds were identified using HPLC-DAD. The results show the highest level of total soluble phenolic content (4.1 ± 0.1 mg GAE/g d.w.) at 80 °C, 50 min and 65:35% ethanol:water, with a high goodness of fit between experimental and predicted values (R2 = 0.987), and a high antioxidant potential (DPPH: 0.42 ± 0.01 mg TE eq/g d.w.; ABTS: 5.82 ± 0.04 mg TE eq/g d.w.). A comparison between the classic extraction techniques and the UAE with the same solvent showed an increase of 156% in the phenol yield. The characterization of phenolic profile revealed that ferulic acid (1.5 ± 0.2 mg/L), vanillic acid (0.78 ± 0.18 mg/L) and p-coumaric acid (0.12 ± 0.03 mg/L) were the prevalent ones. UAE coupled with RSM was a useful tool to inexpensively and quickly recover bioactive phenolic compounds from BSG, which can be used in the food, pharmaceutical or cosmetic industries.

Synergetic Co-Production of Beer Colouring Agent and Solid Fuel from Brewers’ Spent Grain in the Circular Economy Perspective

Brewers’ Spent Grain is a by-product of the brewing process, with potential applications for energy purposes. This paper presents the results of an investigation aiming at valorization of this residue by torrefaction, making product for two purposes: a solid fuel that could be used for generation of heat for the brewery and a colouring agent that could replace colouring malt for the production of dark beers. Decreased consumption of malt for such purposes would have a positive influence on the sustainability of brewing. Torrefaction was performed at temperatures ranging between 180 °C and 300 °C, with a residence time between 20 and 60 min. For the most severe torrefaction conditions (300 °C, 60 min), the higher heating value of torrefied BSG reached 25 MJ/kg. However, the best beer colouring properties were achieved for mild torrefaction conditions, i.e., 180 °C for 60 min and 210 °C for 40 min, reaching European Brewery Convention colours of 145 and 159, respectively. From the solid fuel properties perspective, the improvements offered by torrefaction in such mild conditions were modest. Overall, the obtained results suggest some trade-off between the optimum colouring properties and optimum solid fuel properties that need to be considered when such dual-purpose torrefaction of BSG for brewery purposes is implemented.

Feasibility Analysis of Brewers’ Spent Grain for Energy Use: Waste and Experimental Pellets

Waste production is increasing every day as a consequence of human activities; thus, its valorization is becoming more important. For this purpose, the usage of wastes as biofuels is one of the most important aspects of sustainable strategies. This is the case of the main waste generated in brewing industries: brewers’ spent grain (BSG). In this sector, microbreweries are not able to properly manage the wastes that they generate due to lack of space. Consequently, the transformation of BSG to a high-quality biofuel might be an interesting option for this kind of small industry. In this work, we carried out a physical-energy characterization of BSG, as well as pellets from this waste. The initial characterization showed slightly unfavorable results concerning N and ash, with values of 3.76% and 3.37% db, respectively. Nevertheless, the physical characterization of the pellets was very good, with acceptable bulk density (662.96 kg·m−3 wb) and low heating value (LHV; 17.65 MJ·kg−1 wb), among others. This situation is very favorable for any of the intended uses (for energy use or animal feed, among others).

Sustainability: Recovery and Reuse of Brewing-Derived By-Products

The great global challenge in order to achieve sustainable and inclusive growth over the coming decades is the promotion of the efficient use of resources, favoring a transition to a cleaner and circular economy [...]

Brewer's Spent Grains-Valuable Beer Industry By-Product

The brewing sector is a significant part of the global food industry. Breweries produce large quantities of wastes, including wastewater and brewer’s spent grains. Currently, upcycling of food industry by-products is one of the principles of the circular economy. The aim of this review is to present possible ways to utilize common solid by-product from the brewing sector. Brewer’s spent grains (BSG) is a good material for sorption and processing into activated carbon. Another way to utilize spent grains is to use them as a fuel in raw form, after hydrothermal carbonization or as a feedstock for anaerobic digestion. The mentioned by-products may also be utilized in animal and human nutrition. Moreover, BSG is a waste rich in various substances that may be extracted for further utilization. It is likely that, in upcoming years, brewer’s spent grains will not be considered as a by-product, but as a desirable raw material for various branches of industry.

Non-Destructive Prediction of Titratable Acidity and Taste Index Properties of Gala Apple Using Combination of Different Hybrids ANN and PLSR-Model Based Spectral Data

Non-destructive estimation of the internal properties of fruits and vegetables is very important, because better management can be provided for subsequent operations. Researchers and scientists around the world are focusing on non-destructive methods because if they are developed and commercialized, there will be an impressive change in the food industry. In this regard, this paper aims to present a non-destructive method based on Vis-NIR spectral data. The different stages of the proposed algorithm are: (1) Collection of samples of Gala apples, (2) Spectral data extraction by spectroscopy, (3) Pre-processing of spectral data, (4) Measurement of chemical properties of titratable acidity (TA) and taste index, (5) Selection of key wavelengths using hybrid artificial neural network-firefly algorithm (ANN-FA), (6) Non-destructive estimation of the properties using two methods of hybrid ANN- Particle swarm optimization algorithm and partial least squares regression. For considering the reliability of methods for estimating the chemical properties, the prediction operation was executed in 300 iterations. The results represented that the mean and standard deviation of the correlation coefficient and the root mean square error of hybrid ANN-PSO and PLSR for TA were 0.9095 ± 0.0175, 0.0598 ± 0.0064, 0.834 ± 0.0313 and 0.0761 ± 0.0061 respectively. These values for taste index were 0.918 ± 0.02, 3.2 ± 0.39, 0.836 ± 0.033 and 4.09 ± 0.403, respectively. Therefore, it can be concluded that the hybrid ANN-PSO has a better performance for non-destructive prediction of the two mentioned chemical properties than the PLSR method. In general, the proposed method can predict the chemical properties of TA and taste index non-destructively, which is very useful for mechanized harvesting and management of post-harvest operation.

Brewer’s Spent Grains: Possibilities of Valorization, a Review

This review was based on updated research on how to use brewer’s spent grains (BSG). The use of BSG was considered both in food, as an ingredient or using value-added components derived from brewer’s spent grain, or in non-food products such as pharmaceuticals, cosmetics, construction, or food packaging. BSG is a valuable source of individual components due to its high nutritional value and low cost that is worth exploiting more to reduce food waste but also to improve human health and the environment. From the bioeconomy point of view, biological resources are transformed into bioenergetically viable and economically valuable products. The pretreatment stage of BSG biomass plays an important role in the efficiency of the extraction process and the yield obtained. The pretreatments presented in this review are both conventional and modern extraction methods, such as solvent extractions or microwave-assisted extractions, ultrasonic-assisted extractions, etc.

HTC of Wet Residues of the Brewing Process: Comprehensive Characterization of Produced Beer, Spent Grain and Valorized Residues

Steady consumption of beer results in a steady output of residues, i.e., brewer’s spent grain (BSG). Its valorization, using hydrothermal carbonization (HTC) seems sensible. However, a significant knowledge gap regarding the variability of this residue and its influence on the valorization process and its potential use in biorefineries exists. This study attempted to fill this gap by characterization of BSG in conjunction with the main product (beer), taking into accounts details of the brewing process. Moreover, different methods to assess the performance of HTC were investigated. Overall, the differences in terms of the fuel properties of both types of spent grain were much less stark, in comparison to the differences between the respective beers. The use of HTC as a pretreatment of BSG for subsequent use as a biorefinery feedstock can be considered beneficial. HTC was helpful in uniformization and improvement of the fuel properties. A significant decrease in the oxygen content and O/C ratio and improved grindability was achieved. The Weber method proved to be feasible for HTC productivity assessment for commercial installations, giving satisfactory results for most of the cases, contrary to traditional ash tracer method, which resulted in significant overestimations of the mass yield.