Study on the Coupling Relationship of Low Temperature Fluidity and Oxidation Stability of Biodiesel

Potential of algal oil production from secondary treated sewage: a study using Chlorella vulgaris and synthetic wastewater

To assess the potential of using the secondary treated wastewater for the production of algal biofuel, batch experiments were carried out in photobioreactors using indigenous Chlorella vulgaris isolated from the natural freshwater body. Secondary treated wastewater with partial nitrification was simulated using various proportions of NO3-N and NH4-N while keeping the total nitrogen the same. Experiments with similar concentrations of nitrate without the NH4-N were used for comparison. In the presence of only NO3-N in the concentration range of 9-37 mg/L, the growth and fatty acid methyl ester (FAME) production was similar to the literature reports. When NH4-N was present along with NO3-N, the biomass growth was adversely affected, indicating an impact on the metabolic activity. For the same initial concentrations of nitrate in the culture, the maximum biomass concentration was reduced by 50-60% in the presence of NH4-N. The FAME profile changed significantly and a new FAME was identified, suggesting an impact on the lipid synthesis pathway. Comparison and analysis with the help of existing literature indicated that the adverse effect due to NH4-N was a function of pH. The growth, biomass yield, and FAME production were unaffected by a wide range of phosphorus concentrations. Maximum fatty acid methyl ester (FAME) suitable for biodiesel production (fatty acid carbon chain length C16 to C18) was 381.01 mg/L (224.58 mg/g of dry biomass), produced at NO3-N concentration of 18.5 mg/L and initial nitrogen loading per unit biomass of 0.37 g NO3-N/g of dry biomass.

Inhibition of monogalactosyldiacylglycerol synthesis by down-regulation of MGD1 leads to membrane lipid remodeling and enhanced triacylglycerol biosynthesis in Chlamydomonas reinhardtii

Background

Membrane lipid remodeling involves regulating the physiochemical modification of cellular membranes against abiotic stress or senescence, and it could be a trigger to increase neutral lipid content. In algae and higher plants, monogalactosyldiacylglycerol (MGDG) constitutes the highest proportion of total membrane lipids and is highly reduced as part of the membrane lipid remodeling response under several abiotic stresses. However, genetic regulation of MGDG synthesis and its influence on lipid synthesis has not been studied in microalgae. For development of an industrial microalgae strain showing high accumulation of triacylglycerol (TAG) by promoting membrane lipid remodeling, MGDG synthase 1 (MGD1) down-regulated mutant of Chlamydomonas reinhardtii (Cr-mgd1) was generated and evaluated for its suitability for biodiesel feedstock.

Results

The Cr-mgd1 showed a 65% decrease in CrMGD1 gene expression level, 22% reduction in MGDG content, and 1.39 and 5.40 times increase in diacylglyceryltrimethylhomoserines (DGTS) and TAG, respectively. The expression levels of most genes related to the decomposition of MGDG (plastid galactoglycerolipid degradation1) and TAG metabolism (diacylglycerol O-acyltransferase1, phospholipid:diacylglycerol acyltransferase, and major lipid droplet protein) were increased. The imbalance of DGDG/MGDG ratio in Cr-mgd1 caused reduced photosynthetic electron transport, resulting in less light energy utilization and increased reactive oxygen species levels. In addition, endoplasmic reticulum stress was induced by increased DGTS levels. Thus, accelerated TAG accumulation in Cr-mgd1 was stimulated by increased cellular stress as well as lipid remodeling. Under high light (HL) intensity (400 µmol photons/m2/s), TAG productivity in Cr-mgd1–HL (1.99 mg/L/d) was 2.71 times higher than that in wild type (WT–HL). Moreover, under both nitrogen starvation and high light intensity, the lipid (124.55 mg/L/d), TAG (20.03 mg/L/d), and maximum neutral lipid (56.13 mg/L/d) productivity were the highest.

Conclusions

By inducing lipid remodeling through the mgd1 gene expression regulation, the mutant not only showed high neutral lipid content but also reached the maximum neutral lipid productivity through cultivation under high light and nitrogen starvation conditions, thereby possessing improved biomass properties that are the most suitable for high quality biodiesel production. Thus, this mutant may help understand the role of MGD1 in lipid synthesis in Chlamydomonas and may be used to produce high amounts of TAG.

Qualitative and quantitative analysis of the influence of biodiesel fatty acid methyl esters on iodine value

Iodine value (IV) is an indicator to evaluate the degree of unsaturation (DU) of biodiesel. It reflects the biodiesel degradation and oxidation stability (OS) and also has an effect on viscosity, low-temperature flow properties (LTFP), and the combustion performance. To construct a theoretical system for the simultaneous optimization of LTFP and OS of biodiesel using IV, 52 measured experimental data are used to investigate the qualitative and quantitative relationship between IV and biodiesel composition. The relationships between biodiesel physicochemical properties and IV are investigated in this work. The qualitative analysis shows that the poly-unsaturated fatty acid methyl esters (FAMEs) contribute to an increase in IV, whereas saturated and mono-unsaturated FAMEs decrease IV. Multiple linear regression (MLR) and artificial neural network (ANN) are used to estimate IV from FAMEs. The correlation coefficient, root mean squared error (RMSE), and mean absolute percentage error (MAPE) are respectively 0.976, 2.45, and 1.76% for the MLR model and 0.983, 2.14, and 1.57% for the back propagation neural network (BPNN) model; these values indicate the high accuracy of these methods. The performances of the proposed models were compared with three existing IV prediction models and validated by another databank. The results indicate that the application of the developed BPNN model is better and more comprehensive. Additionally, a preliminary conclusion is that biodiesel with a low percentage of both long-chain saturated and poly-unsaturated FAMEs can have solidifying point (SP) and OS in the proper range. Biodiesel with a low IV is generally more combustible and efficient.

Two-step microalgal (Coelastrella sp.) treatment of raw piggery wastewater resulting in higher lipid and triacylglycerol levels for possible production of higher-quality biodiesel

Microalgal treatment of undiluted raw piggery wastewater is challenging due to ammonia toxicity and a deep dark color hampering photosynthesis. To overcome these problems, (1) a microalga (Coelastrella sp.) was isolated from an ammonia-rich environment, (2) the wastewater treatment was divided into two steps: a heterotrophic process followed by a mixotrophic process, and (3) a narrower transparent photobioreactor was employed with higher light intensity in the mixotrophic process. Coelastrella sp. removed 99% of ammonia, 92% of chemical oxygen demand (COD), and 100% of phosphorus during the 4-day process. Acetate in the wastewater relieved the ammonia stress on microalgae and promoted algal lipid and triacylglycerol productivity. Oxidative stability and low-temperature fluidity of triacylglycerols in lipids were improved by means of an altered fatty acid profile. Aside from the overall microalgal treatment performance, the proposed processing of piggery wastewater yielded a material suitable for possible production of algal biodiesel of better quality.

Microstructure and Properties of Polytetrafluoroethylene Composites Modified by Carbon Materials and Aramid Fibers

Polytetrafluoroethylene (PTFE) is polymerized by tetrafluoroethylene, which has high corrosion resistance, self-lubrication and high temperature resistance. However, due to the large expansion coefficient, high temperature will gradually weaken the intermolecular bonding force of PTFE, which will lead to the enhancement of permeation absorption and the limitation of the application range of fluoroplastics. In order to improve the performance of PTFE, the modified polytetrafluoroethylene, filled by carbon materials and aramid fiber with different scales, is prepared through the compression and sintering. Moreover, the mechanical properties and wear resistance of the prepared composite materials are tested. In addition, the influence of different types of filler materials and contents on the properties of PTFE is studied. According to the experiment results, the addition of carbon fibers with different scales reduces the tensile and impact properties of the composite materials, but the elastic modulus and wear resistance are significantly improved. Among them, the wear rate of 7 μm carbon fiber modified PTFE has decreased by 70%, and the elastic modulus has increased by 70%. The addition of aramid fiber filler significantly reduces the tensile and impact properties of the composite, but its elastic modulus and wear resistance are significantly improved. Among them, the wear rate of the modified composite material with 3% alumina particles and 5% aramid pulp decreased by 68%, and the elastic modulus increased by 206%.

Performance Optimization of Original Aluminum Ash Coating

Aluminum ash is a kind of industrial solid waste. Original aluminum ash (OAA) can be prepared into original aluminum ash spray powder (OAASP) through hydrolysis treatment, and the original aluminum ash coating (OAAC) can be prepared on the surface of the substrate by plasma spraying. In order to optimize the performance of the OAAC, the OAASP was screened to select the appropriate particle size to improve the flowability of the powder. Then, the influence of the alumina content on coating performance was studied through comparative experiments. The micro morphology of the coating was analyzed, and the performance parameters of the coating were tested. The results show that the spray powder with a particle size of 120–150 mesh accounts for the largest proportion of OAASP, and its flowability is better than that of unsieved OAASP, which is suitable for coating preparation. The performance of the coating can be improved by adding high-purity alumina. When the Al2O3 addition is 50%, the porosity of the coating is 0.131%, the adhesive strength is 17.12 MPa, the microhardness is 713.36 HV, and the abrasion rate 10.31 mg/min. Compared with the coating without Al2O3, the porosity is decreased by 19.63%, the adhesive strength is increased by 5.35%, the microhardness is increased by 17.61%, and the abrasion rate is decreased by 19.83%. There are regions with different brightness on the surface of the coating with Al2O3. After semiquantitative analysis, the main phase in the bright region is Al2O3, and the main phases in the dark and gray regions are Al2O3, SiO2, and Fe3O4. The performance of the OAAC can be optimized by improving the flowability of the sprayed powder and increasing the alumina content.

Coating Process Parameters and Structural Properties of the Tubular Electrodes of Fuel Cells Based on a Self-Made Coating Device

The electrode is one of the most important components of tubular direct methanol fuel cells (DMFC), and the coating process directly determines its performance. In the present research, a tubular electrode coating device was designed based on planetary gear structures, and the influence of the coating process parameters on the electrode structure’s performance was studied. The experimental results show that: the coating layer on the electrode surface prepared by the self-made device is uniform and dense, and the coating surface quality is better than a manual coating. The best coating environment temperature is 30–40 °C, and the coating spindle speed is 6.67 r/min. Under the condition in which Nafion 117 is used as the proton exchange membrane, the fuel cell is placed in 1 mol/L H2SO4 + 0.5 mol/L CH3OH electrolyte, and high-purity oxygen is fed at a rate of 100 mL/min, the power density of the electrode coated by the self-made device can reach 20.50 mW/cm2, which is about 2.4 times that of the electrode coated manually.