Rice Industry By-Products as Adsorbent Materials for Removing Fluoride and Arsenic from Drinking Water—A Review

Potential of ash from agricultural waste as substitute of commercial FeCl3 in primary treatment of landfill leachate

Due to the ever increasing global population, higher volumes of industrial waste discharges to landfill have caused major problems for the environment. This study investigated the performance of rice straw ash (RSA) as a natural coagulant under different conditions for the treatment of landfill leachates by coagulation-flocculation and microfiltration, with and without addition of FeCl3. The highest performing treatment conditions (RSA = 2.48 g/L, FeCl3 = 4.98 g/L, settling time = 54.75min) were achieved with the combined use of RSA and FeCl3 as coagulant and led to a sludge volume index of 41.65 mL/g, 51.27% COD removal and 76.48% total suspended solid removal. In contrast, FeCl3 alone achieved slightly better COD and total suspended solid removal rates, however it resulted in higher sludge volume index and sludge production. The combined use of RSA and FeCl3 reduced the consumption of these two coagulants by 78.76% and 46.69% respectively. Functional groups and thermal stability of the flocs showed that RSA + FeCl3 synergistically enhance the mechanisms of the coagulation-flocculation process, including adsorption by particle's bridging, charge neutralization and size of flocs. Combining the coagulants resulted in increased van der Waals forces and lower attractive forces of the inter-colloidal energy barrier in the leachate. Additionally, the highest and lowest heavy metals removal rates for treatment by microfiltration were found for Fe (92.15%) and Mg (7.63%), with a total heavy metals removal efficiency in the range of 6.08-90.78%. The findings of this study show that RSA can serve as a natural eco-friendly coagulant both alone and in combination with FeCl3 in the leachate treatment.

Application of conventional and emerging low-cost adsorbents as sustainable materials for removal of contaminants from water

The impact of water pollution has led to the search for cost-effective and environmentally friendly treatment processes to alleviate the associated environmental hazards. Adsorption is identified as an advanced treatment technology that offers simplicity and cheap alternatives to water treatment technologies when low-cost adsorbents such as industrial by-products, waste, and agricultural waste are utilized. The utilization of these materials as low-cost adsorbents for the treatment of drinking water will bring them some value. Several practices have been done to improve the removal efficiencies of the low-cost adsorbents in order to achieve WHO standards of drinking water quality. The paper highlights some of the synthesis routes employed for the modification of low-cost adsorbents. This updated review provides information on the different applications of low-cost adsorbents in removing pollutants and their adsorption capacities in an attempt to deploy the recent sustainable low-cost adsorbents with high removal efficiencies for water treatment. Future research should focus on the fabrication of hybrid low-cost adsorbents with multifunctional and antimicrobial properties. In addition, life cycle assessment (LCA) should be conducted to reveal the environmental burdens associated with the modification of the low-cost adsorbent to improve their removal efficiencies.