Adsorption Characteristics of Phenolic Compounds on Graphene Oxide and Reduced Graphene Oxide: A Batch Experiment Combined Theory Calculation

All-in-one continuous electrochemical monitoring of 2-phenylphenol removal from water by electro-Fenton treatment

The biggest allure of heterogeneous electro-Fenton (HEF) processes largely fails on its high efficiency for the degradation of a plethora of hazardous compounds present in water, but still challenging to search for good and cost-effective electrocatalyst. In this work, carbon black (CB) and oxidised carbon black (CBox) materials were investigated as cathodes in the electrochemical production of hydrogen peroxide involved in HEF reaction for the degradation of 2-phenylphenol (2PP) as a target pollutant. The electrodes were fabricated by employing carbon cloth as support, and the highest H2O2 production yields were obtained for the CBox, pointing out the beneficial effect of the hydrophilic character of the electrode and oxygen-type functionalization of the carbonaceous surface. HEF degradation of 2PP was explored at -0.7 V vs. Ag/AgCl exhibiting the best conversion rates and degradation grade (total organic carbon) for the CBox-based cathode. In addition, the incorporation of an electrochemical sensor of 2PP in line with the HEF reactor was accomplished by the use of screen-printed electrodes (SPE) in order to monitor the pollutant degradation. The electrochemical sensor performance was evaluated from the oxidation of 2PP in the presence of Fe2+ ions by using square wave voltammetry (SWV) technique. The best electrochemical sensor performance was based on SPE modified with Meldola Blue showing a high sensitivity, low detection limit (0.12 ppm) and wide linear range (0.5-21 ppm) with good reproducibility (RSD 2.3 %). The all-in-one electrochemical station has been successfully tested for the degradation and quantification of 2PP, obtaining good recoveries analysing spiked waters from different water matrices origins.

Enhancement of self-powered humidity sensing of graphene oxide-based triboelectric nanogenerators by addition of graphene oxide nanoribbons

A triboelectric nanogenerator (TENG) electrode sensitive to the adsorption of water molecules has been introduced to create a self-powered humidity sensor. Graphene oxide (GO) nanosheets and graphene oxide nanoribbon (GONR) possessing oxygenated functional groups, as well as high dielectric constants, have been proposed as appropriate candidates for this purpose. GO papers have been fabricated in three forms, i.e. pure  GO paper, uniform composites of GONR and GO, and double-layer structures of GONR on top of  GO. Results showed that all of the prepared paper-based TENGs revealed excellent performances by maximum output voltage above 300 V. As active humidity sensors, the maximum voltage response values of 57%, 124%, and 78% were obtained for GO, GONR+GO, and GONR/GO TENGs, respectively. Besides high sensitivity and precision of all variants, GO+GONR TENG demonstrated a rapid response/recovery behavior (0.3/0.5 s). This phenomenon can be attributed to the higher oxygenated groups and defects on the edges of GONR, which leads to facilitating the bulk diffusion of water molecules. Our results open new avenues of GONR application as an additive to enhance the performance of self-powered humidity sensors, as well as conventional hygrometers.

Curcumin loaded on graphene nanosheets induced cell death in mammospheres from MCF-7 and primary breast tumor cells

Elimination of tumor cells is still a therapeutic challenge for breast cancer (BC) in men and women. Mammospheres serve as valuablein vitrotools for evaluating tumor behavior and sensitivity to anticancer treatments. Graphene nanosheets with unique physicochemical properties have been considered as potential biomedical approaches for drug delivery, bioimaging, and therapy. Graphene oxide (GO) and graphene quantum dots (GQDs) are suitable nanocarriers for hydrophobic and low bioaccessible anti-tumor materials like curcumin. Despite extensive studies on the potential application of graphene nanosheets in medicine, our knowledge of how different cells function and respond to these nanoparticles remains limited. Here, we evaluated cell death in mammospheres from MCF-7 and primary tumor cells in response to curcumin loaded on graphene nanosheets. Mammospheres were exposed to graphene oxide-curcumin (GO-Cur) and graphene quantum dots-curcumin (GQDs-Cur), and the incidence of cell death was evaluated by Hoechst 33342/propidium iodide double staining and flow cytometry. Besides, the expression of miR-21, miR-29a, Bax, and Bcl-2 genes were assessed using RT-qPCR. We observed, GO, and GQDs had no cytotoxic effect on Kerman male breast cancer/71 (KMBC/71) and MCF-7 tumor cells, while curcumin induced death in more than 50% of tumor cells. GO-Cur and GQDs-Cur synergistically enhanced anti-tumor activity of curcumin. Moreover, GQDs-Cur induced cell death in almost all cells of KMBC/71 mammospheres (99%;p< 0.0001). In contrast, GO-Cur induced cell death in only 21% of MCF-7 mammosphere cells (p< 0.0001). Also, the expression pattern of miR-21, miR-29a, and Bax/Bcl-2 ratio in KMBC/71 and MCF-7 mammospheres was different in response to GO-Cur and GQDs-Cur. Although KMBC/71 and MCF-7 tumor cells had similar clinical features and displayed similar responses to curcumin, more investigations are needed to clarify the detailed molecular mechanisms underlying observed differences in response to GO-Cur and GQDs-Cur.

Ceramic hydroxyapatite foam as a new material for Bisphenol A removal from contaminated water

Ceramic hydroxyapatite foam (CF-HAP) was prepared by combining slip-casting and foaming methods. The prepared CF-HAP was characterized by scanning electron microscopy (SEM), physisorption of N₂, Fourier transforms infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The results of the specific surface area and SEM analyses revealed that the used shaping method provides CF-HAP with a wide range of porosity including macro and mesopores. Based on FTIR and XRD analyses, the CF-HAP is similar to pure well-crystallized hydroxyapatite. The adsorption results revealed that 94% of the BPA with a concentration of (40 mg/L) was effectively removed from the water and that the maximum adsorption capacity was higher in acidic than in basic medium. The thermodynamic studies indicated that the adsorption reaction was spontaneous and endothermic in nature. The adsorption capacity increased with the temperature and the BPA is chemisorbed on the ceramic foam. The isotherm data fitted slightly better with the Liu than with the Freundlich and Langmuir models suggesting that the adsorption was homogeneous and occurred only in the monolayer. The adsorption process depends largely on the BPA concentration and the results fitted well with the pseudo-first-order model. This confirms that the interaction between the BPA and the CF-HAP was mainly chemical in nature. The FTIR analysis of the used and fresh CF-HAP showed that all the hydroxyl and phosphorus bands characteristic of the hydroxyapatite shifted after adsorption of Bisphenol A. This suggests that the adsorption of Bisphenol A occurred in the sites of the hydroxyapatite. Therefore, it can be concluded that the CF-HAP has the potential to be used as an adsorbent for wastewater treatment and purification processes.

An Overview and Evaluation of Highly Porous Adsorbent Materials for Polycyclic Aromatic Hydrocarbons and Phenols Removal from Wastewater

Polycyclic aromatic hydrocarbons (PAHs) and phenolic compounds had been widely recognized as priority organic pollutants in wastewater with toxic effects on both plants and animals. Thus, the remediation of these pollutants has been an active area of research in the field of environmental science and engineering. This review highlighted the advantage of adsorption technology in the removal of PAHs and phenols in wastewater. The literature presented on the applications of various porous carbon materials such as biochar, activated carbon (AC), carbon nanotubes (CNTs), and graphene as potential adsorbents for these pollutants has been critically reviewed and analyzed. Under similar conditions, the use of porous polymers such as Chitosan and molecularly imprinted polymers (MIPs) have been well presented. The high adsorption capacities of advanced porous materials such as mesoporous silica and metal-organic frameworks have been considered and evaluated. The preference of these materials, higher adsorption efficiencies, mechanism of adsorptions, and possible challenges have been discussed. Recommendations have been proposed for commercialization, pilot, and industrial-scale applications of the studied adsorbents towards persistent organic pollutants (POPs) removal from wastewater.

The Adsorption of Methylene Blue on Eco-Friendly Reduced Graphene Oxide

Recently, green-prepared oxidized graphenes have attracted huge interest in water purification and wastewater treatment. Herein, reduced graphene oxide (rGO) was prepared by a scalable and eco-friendly method, and its potential use for the removal of methylene blue (MB) from water systems, was explored. The present work includes the green protocol to produce rGO and respective spectroscopical and morphological characterizations, as well as several kinetics, isotherms, and thermodynamic analyses to successfully demonstrate the adsorption of MB. The pseudo-second-order model was appropriated to describe the adsorption kinetics of MB onto rGO, suggesting an equilibrium time of 30 min. Otherwise, the Langmuir model was more suitable to describe the adsorption isotherms, indicating a maximum adsorption capacity of 121.95 mg g^-1 at 298 K. In addition, kinetics and thermodynamic analyses demonstrated that the adsorption of MB onto rGO can be treated as a mixed physisorption-chemisorption process described by H-bonding, electrostatic, and π - π interactions. These results show the potential of green-prepared rGO to remove cationic dyes from wastewater systems.

Proteinase-sculptured 3D-printed graphene/polylactic acid electrodes as potential biosensing platforms: towards enzymatic modeling of 3D-printed structures

3D printing technologies are currently appealing for the research community due to their demonstrated versatility for different scientific applications. One of the most commonly used materials for 3D printing is polylactic acid (PLA), a biodegradable polymer that can be fully or partially digested by enzymes such as proteinase K. This work seeks to exploit PLA's biodegradability to selectively and reproducibly sculpt 3D-printed graphene/PLA surfaces to turn them into sensitive electroactive platforms. Proteinase K-catalyzed digestion of 3D-printed graphene/PLA electrodes is proposed as an environmentally friendly, highly controllable, and reproducible activation procedure of 3D-printed electrodes. Proteinase K digests PLA in a controllable fashion, exposing electroactive graphene sheets embedded within the 3D-printed structures to the solution and therefore achieving a tailorable electrode performance. A proof-of-concept biosensing application is proposed, based on the immobilization of enzyme alkaline phosphatase at the sculptured electrodes with the subsequent electrochemical detection of 1-naphthol in aqueous media. This work attempts to continue demonstrating the potential of 3D printing in electroanalytical applications, as well as to explore the exciting possibilities arising from merging biotechnological processes with these manufacturing procedures.