1,3-Diene Polymerization Mediated by Homoleptic Tetramethylaluminates of the Rare-Earth Metals

Rare Earths-The Answer to Everything

Rare earths, scandium, yttrium, and the fifteen lanthanoids from lanthanum to lutetium, are classified as critical metals because of their ubiquity in daily life. They are present in magnets in cars, especially electric cars; green electricity generating systems and computers; in steel manufacturing; in glass and light emission materials especially for safety lighting and lasers; in exhaust emission catalysts and supports; catalysts in artificial rubber production; in agriculture and animal husbandry; in health and especially cancer diagnosis and treatment; and in a variety of materials and electronic products essential to modern living. They have the potential to replace toxic chromates for corrosion inhibition, in magnetic refrigeration, a variety of new materials, and their role in agriculture may expand. This review examines their role in sustainability, the environment, recycling, corrosion inhibition, crop production, animal feedstocks, catalysis, health, and materials, as well as considering future uses.

DFT and ONIOM Simulation of 1,3-Butadiene Polymerization Catalyzed by Neodymium-Based Ziegler-Natta System

Using modern methods of quantum chemistry, a theoretical substantiation of the high cis-stereospecificity of 1,3-butadiene polymerization catalyzed by the neodymium-based Ziegler-Natta system was carried out. For DFT and ONIOM simulation, the most cis-stereospecific active site of the catalytic system was used. By analyzing the total energy, as well as the enthalpy and Gibbs free energy of the simulated catalytically active centers, it was found that the coordination of 1,3-butadiene in the trans-form was more favorable than in the cis-form by 11 kJ/mol. However, as a result of π-allylic insertion mechanism modeling, it was found that the activation energy of cis-1,3-butadiene insertion into the π-allylic neodymium-carbon bond of the terminal group on the reactive growing chain was 10-15 kJ/mol lower than the activation energy of trans-1,3-butadiene insertion. The activation energies did not change when both trans-1,4-butadiene and cis-1,4-butadiene were used for modeling. That is, 1,4-cis-regulation was due not to the primary coordination of 1,3-butadiene in its cis-configuration, but to its lower energy of attachment to the active site. The obtained results allowed us to clarify the mechanism of the high cis-stereospecificity of 1,3-butadiene polymerization by the neodymium-based Ziegler-Natta system.

Coordinative Chain Transfer Polymerization of Sustainable Terpene Monomers Using a Neodymium-Based Catalyst System

The present investigation involves the coordinative chain transfer polymerization (CCTP) of biobased terpenes in order to obtain sustainable polymers from myrcene (My) and farnesene (Fa), using the ternary Ziegler–Natta catalyst system comprising [NdV₃]/[Al(i-Bu)₂H]/[Me₂SiCl₂] and Al(i-Bu)₂H, which acts as cocatalyst and chain transfer agent (CTA). The polymers were produced with a yield above 85% according to the monomeric consumption at the end of the reaction, and the kinetic examination revealed that the catalyst system proceeded with a reversible chain transfer mechanism in the presence of 15–30 equiv. of CTA. The resulting polyterpenes showed narrow molecular weight distributions (M_w/M_n = 1.4–2.5) and a high percent of 1,4-cis microstructure in the presence of 1 equiv. of Me₂SiCl₂, having control of the molecular weight distribution in Ziegler–Natta catalytic systems that maintain a high generation of 1,4-cis microstructure.

Terpene Coordinative Chain Transfer Polymerization: Understanding the Process through Kinetic Modeling

The interest in the Coordinative Chain Transfer Polymerization (CCTP) of a family of naturally occurring hydrocarbon monomers, namely terpenes, for the production of high-performance rubbers is increasing year by year. In this work, the synthesis of poly(β-myrcene) via CCTP is introduced, using neodymium versatate (NdV₃), diisobutylaluminum hydrade (DIBAH) as the catalytic system and dimethyldichlorosilane (Me₂SiCl₂) as the activator. A bimodal distribution in the GPC signal reveals the presence of two populations at low conversions, attributable to dormants (arising from reversible chain transfer reactions) and dead chains (arising from termination and irreversible chain transfer reactions); a unimodal distribution is generated at medium and high conversions, corresponding to the dominant species, the dormant chains. Additionally, a mathematical kinetic model was developed based on the Method of Moments to study a set of selected experiments: ([β-myrcene]₀:[NdV₃]₀:[DIBAH]₀:[Me₂SiCl₂]₀ = 660:1:2:1, 885:1:2:1, and 533:1:2:1). In order to estimate the kinetic rate constant of the systems, a minimization of the sum of squared errors (SSE) between the model predicted values and the experimental measurements was carried out, resulting in an excellent fit. A set of the Arrhenius parameters were estimated for the ratio [β-myrcene]₀:[NdV₃]₀:[DIBAH]₀:[Me₂SiCl₂]₀ = 660:1:2:1 in a temperature range between 50 to 70 °C. While the end-group functionality (EGF) was predominantly preserved as the ratio [β-myrcene]₀:[NdV₃]₀ was decreased, higher catalytic activity was obtained with a high ratio.

Rare Earth Starting Materials and Methodologies for Synthetic Chemistry

The number of rare earth (RE) starting materials used in synthesis is staggering, ranging from simple binary metal-halide salts to borohydrides and "designer reagents" such as alkyl and organoaluminate complexes. This review collates the most important starting materials used in RE synthetic chemistry, including essential information on their preparations and uses in modern synthetic methodologies. The review is divided by starting material category and supporting ligands (i.e., metals as synthetic precursors, halides, borohydrides, nitrogen donors, oxygen donors, triflates, and organometallic reagents), and in each section relevant synthetic methodologies and applications are discussed.

Rigid Acridane-Based Pincer Supported Rare-Earth Complexes for cis-1,4-Polymerization of 1,3-Conjugated Dienes

A convenient synthetic route has been developed for preparing the novel rigid 4,5-(PR₂)2-2,7,9,9-tetramethylacridane-based pincer ligands (^acri-RPNP; R = ⁱPr and Ph), and the first rare-earth (Ln = Y, Lu) alkyl complexes bearing the ^acri-RPNP ligands were synthesized by a salt metathesis reaction (for the isopropyl-substituent ^acri-iPrPNP complexes, 1-Ln) or direct alkylation (for the phenyl-substituent ^acri-PhPNP complexes, 2-Ln). For both 1-Ln and 2-Ln, the NMR spectroscopy and X-ray diffraction study confirmed the successful coordination of the ^acri-RPNP ligand to the central metal ion in a tridentate manner via the two phosphine and the nitrogen donors. In contrast to 1-Ln that are solvent-free complexes, the metal centers in 2-Ln are each coordinated with one tetrahydrofuran molecule. Upon activation by [Ph₃C][B(C₆F₅)₄], 1-Y and 2-Lu could catalyze the living polymerization of isoprene and β-myrcene with high catalytic activity and high cis-1,4-selectivity (up to 92.3% for isoprene and 98.5% for β-myrcene). Moreover, the 1-Y/[Ph₃C][B(C₆F₅)₄] catalytic system also could promote the polymerization of butadiene and its copolymerization with isoprene to produce copolymers with high cis-1,4-selectivity and narrow polydispersity.

Scandium bis(trimethylsilyl)methyl complexes revisited: extending the 45Sc NMR chemical shift range and a new structural motif of Li[CH(SiMe3)2]

Depending on the molar ratio employed, the reaction of ScCl₃(thf)₃ with Li[CH(SiMe₃)₂] afforded the bis and tris(alkyl) ate complexes [Sc{CH(SiMe₃)₂}₂(μ-Cl)₂Li(thf)₂]₂ and Sc[CH(SiMe₃)₂]₃(μ-Cl)Li(thf)₃, respectively, in moderate yields. Treatment of these mixed alkyl/chlorido complexes with MeLi gave the mixed alkyl complexes [Sc{CH(SiMe₃)₂}₂(μ-Me)₂Li(thf)₂]₂ and Sc[CH(SiMe₃)₂]₃(μ-Me)Li(thf)₃. Aiming at homoleptic {Sc[CH(SiMe₃)₂]₃} both of the mixed [CH(SiMe₃)₂]/Me complexes were treated with AlMe₃. Although LiAlMe₄ separation occurred, aluminium complex Al[CH(SiMe₃)₂]Me₂(thf) was the only isolable crystalline complex. Ate complexes [Sc{CH(SiMe₃)₂}₂(μ-Me)₂Li(thf)₂]₂ and [Sc(CH₂SiMe₃)₄][Li(thf)₄] revealed the maximum downfield ⁴⁵Sc NMR chemical shifts of 888.0 and 933.4 ppm, respectively, reported to date. The synthesis of putative {Sc[CH(SiMe₃)₂]₃} was also attempted via the aryloxide route applying complexes Sc(OC₆H₂tBu₂-2,6-Me-4)₃ and [Sc(OC₆H₃iPr₂-2,6)₃]₂ along with Li[CH(SiMe₃)₂] but the outcome was inconclusive. Instead, a cyclic octamer was found for Li[CH(SiMe₃)₂] in the solid state.

Lutetium and yttrium complexes supported by an anilido-oxazoline ligand for polymerization of 1,3-conjugated dienes and ε-caprolactone

Lutetium and yttrium complexes supported by an anilido-oxazoline ligand exhibit highcis-1,4 stereoselectivity for 1,3-conjugated diene polymerization and high activity for ring-opening polymerization of ε-caprolactone.

C-H-Bond Activation and Isoprene Polymerization Studies Applying Pentamethylcyclopentadienyl-Supported Rare-Earth-Metal Bis(Tetramethylaluminate) and Dimethyl Complexes

As previously shown for lutetium and yttrium, 1,2,3,4,5-pentamethylcyclopentadienyl (C₅Me₅ = Cp*)-bearing rare-earth metal dimethyl half-sandwich complexes [Cp*LnMe₂]₃ are now also accessible for holmium, dysprosium, and terbium via tetramethylaluminato cleavage of [Cp*Ln(AlMe₄)₂] with diethyl ether (Ho, Dy) and tert-butyl methyl ether (TBME) (Tb). C–H-bond activation and ligand redistribution reactions are observed in case of terbium and are dominant for the next larger-sized gadolinium, as evidenced by the formation of mixed methyl/methylidene clusters [(Cp*Ln)₅(CH₂)(Me)₈] and metallocene dimers [Cp*₂Ln(AlMe₄)]₂ (Ln = Tb, Gd). Applying TBME as a “cleaving” reagent can result in both TBME deprotonation and ether cleavage, as shown for the formation of the 24-membered macrocycle [(Cp*Gd)₂(Me)(CH₂OtBu)₂(AlMe₄)]₄ or monolanthanum complex [Cp*La(AlMe₄){Me₃Al(CH₂)OtBu}] and monoyttrium complex [Cp*Y(AlMe₄)(Me₃AlOtBu)], respectively. Complexes [Cp*Ln(AlMe₄)₂] (Ln = Ho, Dy, Tb, Gd) and [Cp*LnMe₂]₃ (Ln = Ho, Dy) are applied in isoprene and 1,3-butadiene polymerization, upon activation with borates [Ph₃C][B(C₆F₅)₄] and [PhNHMe₂][B(C₆F₅)₄], as well as borane B(C₆F₅)₃. The trans-directing effect of AlMe₃ in the binary systems [Cp*Ln(AlMe₄)₂]/borate is revealed and further corroborated by the fabrication of high-cis-1,4 polybutadiene (97%) with “aluminum-free” [Cp*DyMe₂]₃/[Ph₃C][B(C₆F₅)₄]. The formation of multimetallic active species is supported by the polymerization activity of pre-isolated cluster [(Cp*Ho)₃Me₄(CH₂)(thf)₂].

Trimethylscandium

The hitherto unknown homoleptic tetramethylaluminate complex [Sc(AlMe₄)₃] could be obtained by reacting the ate complex [Li₃ScMe₆(thf)_1.2] with AlMe₃ in the cold. It cocrystallizes with AlMe₃ as [Sc(AlMe₄)₃(Al₂Me₆)_0.5] and decomposes at ambient temperature in n-pentane via multiple C-H bond activations to the mixed methyl/methylidene complex [Sc₃(μ₃-CH₂)₂(μ₂-CH₃)₃(AlMe₄)₂(AlMe₃)₂]. Donor-induced methylaluminate cleavage of [Sc(AlMe₄)₃(Al₂Me₆)_0.5] produced [ScMe₃]_n in good yield, which could be derivatized with trimethyltriazacyclononane (Me₃TACN) to form the structurally characterizable [(Me₃TACN)ScMe₃]. Additionally, half-sandwich complex [Cp*Sc(AlMe₄)₂] and sandwich complex [Cp*₂Sc(AlMe₄)] were accessible by salt metathesis reactions from [Sc(AlMe₄)₃(Al₂Me₆)_0.5] and KCp* (Cp* = C₅Me₅). ⁴⁵Sc NMR spectroscopy was applied as a significant probe to evidence the existence of [ScMe₃]_n. Compounds [(Me₃TACN)ScMe₃] (+624.6 ppm) and [ScMe₃(thf)_x] (+601.7 ppm) gave large ⁴⁵Sc NMR shifts, revealing the strong deshielding effect of the σ-bonded alkyl ligands on the scandium nuclei. Ultimately, cationized [Sc(AlMe₄)₃(Al₂Me₆)_0.5] was employed in isoprene polymerization, leading to polymers in high yields (>95%) and with high (>90%) cis-1,4-polyisoprene content.

Metal-directed self-assembly of transition metal heterometallascorpionates

3d metal-based heterometallascorpionates featuring high-spin Co(ii) and Ni(ii) centers were prepared and their structural, magnetic and electronic properties investigated.

Catalysts for the Controlled Polymerization of Conjugated Dienes

Since its first discovery at the beginning of the 1960s […]